| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/IEC/IEEE 18883:2016 |
Information technology — Ubiquitous green community control network — Security |
ISO/IEC/IEEE 18883:2016 is a specification which provides security service enhancements for the protocol defined in IEEE Std 1888™1, IEEE Standard for Ubiquitous Green Community Control Network Protocol. This standard describes security requirements for the ubiquitous green community control network and specifies the system security architecture along with security procedures and protocols.
|
Published |
2016-04 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 19637:2016 |
Information technology — Sensor network testing framework |
ISO/IEC 19637:2016 specifies:
- testing framework for conformance test for heterogeneous sensor networks,
- generic services between test manager (TMR) and test agent (TA) in the testing framework, and
- guidance for creating testing platform and enabling the test of different sensor network protocols.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 36 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 20005:2013 |
Information technology — Sensor networks — Services and interfaces supporting collaborative information processing in intelligent sensor networks |
ISO/IEC 20005:2013 specifies services and interfaces supporting collaborative information processing (CIP) in intelligent sensor networks which includes:
CIP functionalities and CIP functional model,
common services supporting CIP,
common service interfaces to CIP.
|
Published |
2013-07 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
35.020
Information technology (IT) in general
;
35.110
Networking
|
| ISO/IEC 21228:2019 |
Information technology — Telecommunications and information exchange between systems — Coexistence mechanism for broadband powerline communication technologies |
This document specifies the coexistence mechanism for various broadband powerline communication systems. By using the coexistence mechanism, possible harmful interference between different standard-based high-speed powerline communication systems can be avoided.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 8632-1:1992/Amd 2:1995 |
Information technology — Computer graphics — Metafile for the storage and transfer of picture description information — Part 1: Functional specification — Amendment 2: Application structuring extensions |
|
Withdrawn |
1995-07 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
35.140
Computer graphics
|
| ISO/IEC 21823-3:2021 |
Internet of things (IoT) — Interoperability for IoT systems — Part 3: Semantic interoperability |
This document provides the basic concepts for IoT systems semantic interoperability, as described in the facet model of ISO/IEC 21823-1, including: – requirements of the core ontologies for semantic interoperability; – best practices and guidance on how to use ontologies and to develop domain-specific applications, including the need to allow for extensibility and connection to external ontologies; – cross-domain specification and formalization of ontologies to provide harmonized utilization of existing ontologies; – relevant IoT ontologies along with comparative study of the characteristics and approaches in terms of modularity, extensibility, reusability, scalability, interoperability with upper ontologies, and so on, and; – use cases and service scenarios that exhibit necessities and requirements of semantic interoperability.
|
Published |
2021-09 |
Edition : 1 |
Number of pages : 47 |
Technical Committee |
35.020
Information technology (IT) in general
;
35.110
Networking
|
| ISO/IEC 22425:2017 |
Information technology — Telecommunications and information exchange between systems — NFC-SEC Test Methods |
ISO/IEC 22425:2017 specifies the definitions, rules and methods for the NFC-SEC-TEST standard and the necessary test apparatus. The test report templates are provided in Annexes A and B.
|
Published |
2017-11 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
35.110
Networking
|
| ISO/IEC TR 22560:2017 |
Information technology — Sensor networks — Use cases of aeronautics industry: Active Air-flow Control |
ISO/IEC TR 22560:2017(E) This Technical Report describes the concepts, issues, objectives, and requirements for the design of an active air-flow control (AFC) system for commercial aircraft based on a dense deployment of wired and wireless sensor and actuator networks. It focuses on the architecture design, module definition, statement of objectives, scalability analysis, system-level simulation, as well as networking and implementation issues using standardized interfaces and service-oriented middleware architectures.
|
Published |
2017-10 |
Edition : 1 |
Number of pages : 45 |
Technical Committee |
35.110
Networking
;
49.060
Aerospace electric equipment and systems
|
| ISO/IEC 23289:2002 |
Information technology — Telecommunications and information exchange between systems — Corporate telecommunication networks — Signalling interworking between QSIG and H.323 — Basic services |
ISO/IEC 23289:2002 specifies signalling interworking between "QSIG" and "H.323" in support of basic services within a corporate telecommunication network (CN).
"QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated services Network eXchange (PINX) within a Private Integrated Services Network (PISN). The Q reference point is defined in ISO/IEC 11579-1. A PISN provides circuit-switched basic services and supplementary services to its users. QSIG is specified in other International Standards, in particular ISO/IEC 11572 (call control in support of basic services).
"H.323" is a set of signalling protocols for the support of voice or multimedia communication within a packet network, in particular a packet network that uses the Internet Protocol (IP) as its network layer protocol (IP network). H.323 signalling protocols operate between endpoints in an IP network, either indirectly via one or more gatekeepers, or directly. An endpoint can be a terminal or a gateway to another network. H.323 is an "umbrella" recommendation referring to various ITU-T recommendations, in particular recommendations H.225.0 and H.245 (basic communication capabilities).
ISO/IEC 23289:2002 specifies signalling interworking for basic services that provide a bidirectional transfer capability for speech, DTMF, facsimile and modem media between a PISN employing QSIG and a private IP network employing H.323. This International Standard specifies requirements for establishing user information (audio) connections between the PISN and the IP network, but protocols for transmitting audio in the IP network and for signalling in order to establish and close down audio transmission in the IP network are outside the scope of this International Standard. Supplementary services are outside the scope of this International Standard.
Interworking between QSIG and H.323 permits a call originating at a user of a PISN to terminate at a user of a private IP network, or a call originating at a user of a private IP network to terminate at a user of a PISN.
Interworking between a PISN employing QSIG and a public IP network employing H.323 is outside the scope of this International Standard. However, the functionality specified in this International Standard is in principle applicable to such a scenario when deployed in conjunction with other relevant functionality (e.g., number translation, security functions, etc.).
ISO/IEC 23289:2002 is applicable to any interworking unit that can act as a gateway between a PISN employing QSIG and a private IP network employing H.323.
|
Published |
2002-12 |
Edition : 1 |
Number of pages : 39 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 24767-1:2008 |
Information technology — Home network security — Part 1: Security requirements |
ISO/IEC 24767-1:2008 specifies the security requirements that may come from inside or outside a home. This standard gives guidance for the design of security mechnisms applied either inside home networks or through the Internet, and it provides means to analyse the risks for each networked device and to define its specific security requirements.
|
Published |
2008-09 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
35.110
Networking
;
35.200
Interface and interconnection equipment
;
35.240.99
IT applications in other fields
|
| ISO/IEC 24767-2:2009 |
Information technology — Home network security — Part 2: Internal security services: Secure Communication Protocol for Middleware (SCPM) |
ISO/IEC 24767-2:2009(E) specifies security in a home network for equipment with limited IT capability. Secure Communication Protocol for Middleware (SCPM) is designed to support network security for equipment which is not capable of supporting Internet security protocols. SCPM provides the security services at the network layer and the protocol does not rely on any specific media transmission.
|
Published |
2009-01 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
35.110
Networking
;
35.200
Interface and interconnection equipment
;
35.240.99
IT applications in other fields
|
| ISO/IEC 30100-1:2016 |
Information technology — Home network resource management — Part 1: Requirements |
ISO/IEC 30100-1:2016(E) specifies the minimum requirements of a home network resource management architecture to deliver applications in a safe and future-proof way. This standard describes the user and functional requirements for the management of home network entities as a resource.
|
Published |
2016-04 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
35.110
Networking
;
35.240.99
IT applications in other fields
|
| ISO/IEC 24771:2009 |
Information technology — Telecommunications and information exchange between systems — MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment |
ISO/IEC 24771:2009 defines a protocol for the physical layer (PHY) and the data link layer in order to construct a reliable and high-speed data transmission network between devices on industrial sites such as factories and plants. This network specification provides a standardized protocol to provide a framework for various industrial devices to establish a simple, low-cost, energy-efficient, and high-speed network between them. In order to fulfil the service requirements of the factories and large plants, this network specification is designed to enable devices to establish a network by themselves without the help of any infrastructure and to reliably exchange various kinds of data, including real-time audio and video data, between them. In addition to high transmission rates, Quality of Service (QoS) for multimedia data - such as video - is also provided.
The devices mentioned in ISO/IEC 24771:2009 refer to equipment that can be used on industrial sites such as factories and automated assembly lines. Devices include PLC (Programmable Logic Controller), and CNC (Computerized Numerical Controller) and manufacturing robots. However, beyond such conventional devices, devices mentioned in this document include personal IT devices that workers may carry and use while working, including cellular phones, personal industrial digital assistants (PDA), and laptop PCs.
|
Withdrawn |
2009-04 |
Edition : 1 |
Number of pages : 123 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 24771:2014 |
Information technology — Telecommunications and information exchange between systems — MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment |
ISO/IEC 24771:2014 defines a protocol for the physical layer (PHY) and the data link layer in order to construct a reliable and high-speed data transmission network between devices on industrial sites such as factories and plants. This network specification provides a standardized protocol to provide a framework for various industrial devices to establish a simple, low-cost, energy-efficient, and high-speed network between them. In order to fulfil the service requirements of the factories and large plants, this network specification is designed to enable devices to establish a network by themselves without help of any infrastructure and reliably exchange various kinds of data, including real-time audio and video data, between them. In addition to high transmission rates, Quality of Service (QoS) for multimedia data - such as video - is also provided.
The devices mentioned in ISO/IEC 24771:2014 refer to equipment that is and can be used in industrial sites such as factories and automated assembly lines. Such devices include PLC (Programmable Logic Controller), and CNC (Computerized Numerical Controller) and manufacturing robots. However, beyond such conventional devices, devices mentioned in this International Standard include personal IT devices that workers may carry and use while working, including cellular phones, personal industrial digital assistants (PDA), and laptop PCs.
|
Published |
2014-08 |
Edition : 2 |
Number of pages : 155 |
Technical Committee |
35.110
Networking
|
| ISO/IEC TR 26905:2006 |
Information technology — Telecommunications and information exchange between systems — Enterprise Communication in Next Generation Corporate Networks (NGCN) involving Public Next Generation Networks (NGN) |
ISO/IEC TR 26905:2006 identifies key use cases for communication with or between IP-based Next Generation Corporate Networks (NGCN) involving public next generation networks (NGN), analyses these use cases in terms of available or planned standardized technology and identifies requirements that will have to be met.
ISO/IEC TR 26905:2006 investigates configurations involving NGCNs and NGNs and their interoperating requirements. Non-IP-based interoperation, i.e. using circuit-switched technology, between NGCNs and NGNs is outside the scope of ISO/IEC TR 26905:2006.
ISO/IEC TR 26905:2006 does not discriminate between wireless and wired access technology. The Terminal Equipment (TE) interface within an NGCN is outside the scope of ISO/IEC TR 26905:2006.
All mobility aspects are outside the scope of ISO/IEC TR 26905:2006. They are covered by a companion Technical Report, ISO/IEC TR 26927.
Application considerations such as IP Centrex and CSTA (Computer Supported Telecommunications Applications) are outside the scope of ISO/IEC TR 26905:2006.
|
Published |
2006-11 |
Edition : 1 |
Number of pages : 32 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 26907:2007 |
Information technology — Telecommunications and information exchange between systems — High Rate Ultra Wideband PHY and MAC Standard |
ISO/IEC 26907:2007 specifies a distributed medium access control (MAC) sublayer and a physical layer (PHY) for wireless networks.
|
Withdrawn |
2007-03 |
Edition : 1 |
Number of pages : 291 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 26907:2009 |
Information technology — Telecommunications and information exchange between systems — High-rate ultra-wideband PHY and MAC standard |
ISO/IEC 26907:2009 specifies a distributed medium access control (MAC) sublayer and a physical layer (PHY) for wireless networks.
|
Published |
2009-11 |
Edition : 2 |
Number of pages : 311 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 26908:2007 |
Information technology — Telecommunications and information exchange between systems — MAC-PHY Interface for ISO/IEC 26907 |
ISO/IEC 26908:2007 specifies the interface between implementations of the PHY and MAC as specified in ISO/IEC 26907.
|
Withdrawn |
2007-02 |
Edition : 1 |
Number of pages : 50 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 26908:2009 |
Information technology — Telecommunications and information exchange between systems — MAC-PHY interface for ISO/IEC 26907 |
ISO/IEC 26908:2009 specifies the interface between implementations of the distributed medium access control (MAC) sublayer and a physical layer (PHY) for wireless networks, specified in ISO/IEC 26907.
|
Published |
2009-11 |
Edition : 2 |
Number of pages : 50 |
Technical Committee |
35.110
Networking
|
| ISO/IEC TR 26927:2006 |
Information technology — Telecommunications and information exchange between systems — Corporate Telecommunication Networks — Mobility for Enterprise Communications |
ISO/IEC TR 26927:2006 identifies key mobility issues for access to IP-based enterprise information and communications services. It defines a taxonomy of mobility terms and then explores use cases and connectivity scenarios involving mobile enterprise users. From these, it derives requirements for mobility management, architecture and security.
Mobility for enterprise communication is about making desktop communication and information resources available at different locations and while on the move. ISO/IEC TR 26927:2006 encompasses both wired and wireless connectivity using enterprise and public all-IP networks for voice, data and converged services.
ISO/IEC TR 26927:2006 is intended as an aid to analysing gaps in standardization that prevent or hinder mobility in enterprise communications and information access. More general interworking issues of enterprise communications are covered by a companion Technical Report, ISO/IEC TR 26905.
|
Withdrawn |
2006-12 |
Edition : 1 |
Number of pages : 53 |
Technical Committee |
35.110
Networking
|
| ISO/IEC TR 26927:2011 |
Information technology — Telecommunications and information exchange between systems — Corporate telecommunication networks — Mobility for enterprise communications |
Mobility for enterprise communications is the ability for persons and objects (e.g. vehicles, sensors and other machines) belonging to the enterprise to use communication and information services regardless of changes in their physical location. This includes also the ability to be reached by other persons or objects for communications.
ISO/IEC TR 26927:2011 encompasses the mobility of enterprise users connecting to enterprise and public IP networks using wired and wireless terminals for voice, data and converged services. It defines terms for different types of mobility, describes basic functionality in support of mobility, and lists common deployment scenarios. For each scenario, it identifies functional requirements and standardization gaps with the main focus on the management of mobility, identity, terminals and reachability. However, it does not provide technical solutions but lays the foundations for triggering standardization projects in areas where gaps have been identified.
More general aspects of enterprise communications based on Next Generation Corporate Networks (NGCN) and interconnection with Next Generation Networks (NGN) are covered by ISO/IEC TR 12860, ISO/IEC TR 12861, ISO/IEC TR 16166 and ISO/IEC TR 16167.
|
Published |
2011-09 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29145-1:2014 |
Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services — Part 1: PHY Layer |
ISO/IEC 29145-1:2014(E) specifies the physical (PHY) layer of WiBEEM (Wireless beacon-enabled energy efficient mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network topology as well as device mobility and QoS.
|
Published |
2014-03 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
35.110
Networking
;
35.200
Interface and interconnection equipment
;
35.240.99
IT applications in other fields
|
| ISO/IEC 29145-2:2014 |
Information Technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services — Part 2: MAC Layer |
ISO/IEC 29145-2:2014(E) specifies the MAC of the WiBEEM (Wireless beacon-enabled energy efficient mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network as well as device mobility and QoS.
|
Published |
2014-03 |
Edition : 1 |
Number of pages : 56 |
Technical Committee |
35.110
Networking
;
35.200
Interface and interconnection equipment
;
35.240.99
IT applications in other fields
|
| ISO/IEC 29145-3:2014 |
Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services — Part 3: NWK Layer |
ISO/IEC 29145-3:2014(E) specifies the network layer (NWK) of the WiBEEM (Wireless Beacon-enabled Energy Efficient Mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network as well as device mobility and QoS.
|
Published |
2014-03 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
35.110
Networking
;
35.200
Interface and interconnection equipment
;
35.240.99
IT applications in other fields
|
| ISO/IEC 29157:2010 |
Information technology — Telecommunications and information exchange between systems — PHY/MAC specifications for short-range wireless low-rate applications in the ISM band |
ISO/IEC 29157:2010 specifies the physical layer (PHY) characteristics and medium access control (MAC) procedures used for short-range, low-data-rate, wireless communications with very low latency and point-to-multipoint connection capability in the industrial, scientific and medical (ISM) band.
|
Withdrawn |
2010-06 |
Edition : 1 |
Number of pages : 45 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29157:2015 |
Information technology — Telecommunications and information exchange between systems — PHY/MAC specifications for short-range wireless low-rate applications in the ISM band |
ISO/IEC 29157:2015 specifies the PHY characteristics and MAC procedures used for short-range, low-data-rate, wireless communications with very low latency and point-to-multipoint connection capability.
|
Published |
2015-07 |
Edition : 2 |
Number of pages : 55 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29180:2012 |
Information technology — Telecommunications and information exchange between systems — Security framework for ubiquitous sensor networks |
The recent advancement of wireless-based communication technology and electronics has facilitated the implementation of a low-cost, low-power sensor network. Basically, a ubiquitous sensor network (USN) consists of three parts: a sensor network consisting of a large number of sensor nodes, a base station (also known as a gateway) interfacing between the sensor network and an application server, and the application server controlling the sensor node in the sensor network or collecting the sensed information from the sensor nodes in the sensor network.
ISO/IEC 29180:2012 describes the security threats to and security requirements of the USN. In addition, it categorizes the security technologies according to the security functions that satisfy the said security requirements and where the security technologies are applied in the security model of the USN. Finally, the security functional requirements and security technologies for the USN are presented.
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29180:2012/Cor 1:2015 |
Information technology — Telecommunications and information exchange between systems — Security framework for ubiquitous sensor networks — Technical Corrigendum 1 |
|
Published |
2015-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29182-1:2013 |
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 1: General overview and requirements |
ISO/IEC 29182-1:2013 provides a general overview of the characteristics of a sensor network and the organization of the entities that comprise such a network. It also describes the general requirements that are identified for sensor networks.
|
Published |
2013-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29182-2:2013 |
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 2: Vocabulary and terminology |
ISO/IEC 29182-2:2013 is intended to facilitate the development of International Standards in sensor networks. It presents terms and definitions for selected concepts relevant to the field of sensor networks. It establishes a general description of concepts in this field and identifies the relationships among those concepts. It may also be used as guidance for development of other parts of ISO/IEC 29182 and any other sensor network related standard.
|
Published |
2013-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29182-3:2014 |
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 3: Reference architecture views |
ISO/IEC 29182-3:2014 provides Sensor Network Reference Architecture (SNRA) views. The architecture views include business, operational, systems, and technical perspectives, and these views are presented in functional, logical, and/or physical views where applicable. ISO/IEC 29182-3:2014 focuses on high-level architecture views which can be further developed by system developers and implementers for specific applications and services.
|
Published |
2014-02 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29182-4:2013 |
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 4: Entity models |
The purpose of the ISO/IEC 29182 series is to
provide guidance to facilitate the design and development of sensor networks,
improve interoperability of sensor networks, and
make sensor network components plug-and-play, so that it becomes fairly easy to add/remove sensor nodes to/from an existing sensor network.
ISO/IEC 29182-4 presents models for the entities that enable sensor network applications and services according to the Sensor Network Reference Architecture (SNRA).
|
Published |
2013-07 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29182-5:2013 |
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 5: Interface definitions |
ISO/IEC 29182-5:2013 provides the definitions and requirements of sensor network (SN) interfaces of the entities in the Sensor Network Reference Architecture and covers the following aspects:
interfaces between functional layers to provide service access for the modules in the upper layer to exchange messages with modules in the lower layer;
interfaces between entities introduced in the Sensor Network Reference Architecture enabling sensor network services and applications.
|
Published |
2013-08 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29182-6:2014 |
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 6: Applications |
ISO/IEC 29182-6:2014, describes and provides
a compilation of sensor network applications for which International Standardized Profiles (ISPs) are needed,
guidelines for the structured description of sensor network applications, and
examples for structured sensor network applications.
It does not cover ISPs for which drafting rules are described in ISO/IEC TR 10000. Due to the generic character of ISO/IEC 29182, fully developed ISPs will not be included in this International Standard.
|
Published |
2014-08 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 29182-7:2015 |
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 7: Interoperability guidelines |
ISO/IEC 29182-7:2015 provides a general overview and guidelines for achieving interoperability between sensor network services and related entities in a heterogeneous sensor network.
|
Published |
2015-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30100-2:2016 |
Information technology — Home network resource management — Part 2: Architecture |
ISO/IEC 30100-2:2016(E) specifies the general information model and architecture for managing the resources in a home network. Home network resources are managed objects that provide home network services. Essential home resources include device, network and service resources.
|
Published |
2016-04 |
Edition : 1 |
Number of pages : 193 |
Technical Committee |
35.110
Networking
;
35.240.99
IT applications in other fields
|
| ISO/IEC 30100-3:2016 |
Information technology — Home network resource management — Part 3: Management application |
ISO/IEC 30100-3:2016(E) specifies a control and management interface for the integrated home network resources at the top of the interoperability framework specified by ISO/IEC 18012-1. Methods are
specified for controlling and managing home network resources through a consistent interface regardless of the underlying home network middleware technologies.
|
Published |
2016-04 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
35.110
Networking
;
35.240.99
IT applications in other fields
|
| ISO/IEC 30101:2014 |
Information technology — Sensor networks: Sensor network and its interfaces for smart grid system |
ISO/IEC 30101:2014 is for sensor networks in order to support smart grid technologies for power generation, distribution, networks, energy storage, load efficiency, control and communications, and associated environmental challenges. This International Standard characterizes the requirements for sensor networks to support the aforementioned applications and challenges. Data from sensors in smart grid systems is collected, transmitted, published, and acted upon to ensure efficient coordination of the various systems and subsystems. The intelligence derived through the sensor networks supports synchronization, monitoring and responding, command and control, data/information processing, security, information routing, and human-grid display/graphical interfaces.
This International standard specifies
? interfaces between the sensor networks and other networks for smart grid system applications,
? sensor network architecture to support smart grid systems,
? interface between sensor networks with smart grid systems, and
? sensor network based emerging applications and services to support smart grid systems.
|
Published |
2014-11 |
Edition : 1 |
Number of pages : 101 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30128:2014 |
Information technology — Sensor networks — Generic Sensor Network Application Interface |
ISO/IEC 30128:2014 specifies the interfaces between the application layers of service providers and sensor network gateways, which is Protocol A in interface 3, defined in ISO/IEC 29182‑5.
This International Standard covers
? description of generic sensor network applications' operational requirements,
? description of sensor network capabilities, and
? mandatory and optional interfaces between the application layers of service providers and sensor network gateways
|
Published |
2014-11 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30140-1:2018 |
Information technology — Underwater acoustic sensor network (UWASN) — Part 1: Overview and requirements |
ISO/IEC 30140-1:2018(E) This part of ISO/IEC 30140 provides a general overview of underwater acoustic sensor networks (UWASN). It describes their main characteristics in terms of the effects of propagation variability and analyses the main differences with respect to terrestrial networks. It further identifies the specificities of UWASN and derives some specific and general requirements for these networks.
|
Published |
2018-02 |
Edition : 1 |
Number of pages : 38 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30140-2:2017 |
Information technology — Underwater acoustic sensor network (UWASN) — Part 2: Reference architecture |
ISO/IEC 30140-2:20017(E) This part of ISO/IEC 30140 provides an underwater acoustic sensor network (UWASN) conceptual model by identifying and defining three domains (application domain, network domain and UWASN domain). It also provides multiple reference architecture views consistent with the requirements defined in ISO/IEC 30140-1 (systems reference architecture, communication reference architecture and information reference architecture). For each view, related physical and functional entities are described.
|
Published |
2017-10 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30140-3:2018 |
Information technology — Underwater acoustic sensor network (UWASN) — Part 3: Entities and interface |
ISO/IEC 30140-3:2018 The 30140 series provides general requirements, reference architecture and high-level interface guidelines supporting interoperability among underwater acoustic sensor networks (UWASNs). Part 3 provides descriptions for the entities and interfaces of the UWASN reference architecture.
|
Published |
2018-07 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30140-4:2018 |
Information technology — Underwater acoustic sensor network (UWASN) — Part 4: Interoperability |
ISO/IEC 30140-4:2018 The ISO/IEC 30140 series provides general requirements, reference architecture and high-level interface guidelines supporting interoperability among underwater acoustic sensor networks (UWASNs). Part 4 provides information on interoperability requirements among entities within a UWASN and among various UWASNs.
|
Published |
2018-07 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 13247:1997 |
Information technology — Telecommunications and information exchange between systems — Broadband Private Integrated Services Network — Inter-exchange signalling protocol — Basic call/connection control |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 143 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 30142-2:2022 |
Internet of Things (IoT) — Underwater acoustic sensor network (UWASN) — Network management system — Part 2: Underwater management information base (u-MIB) |
This document provides the underwater management information base (u-MIB) of the underwater network management system (U-NMS). It specifies the following:
general requirements for constructing u-MIB in U-NMS;
designing the managed objects of the manager and agent u-MIB;
integrating the managed objects of the manager and agent u-MIB.
|
Published |
2022-08 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30142:2020 |
Information technology — Underwater acoustic sensor network (UWASN) — Network management system overview and requirements |
ISO/IEC 30142:2020 provides the overview and requirements of a network management system in underwater acoustic sensor network (UWASN) environment. It specifies the following:
– functions which support underwater network management system;
– entities required for underwater network management system;
– data about the communication between elements in underwater network management system;
– guidelines to model the underwater network management system;
– general and functional requirements of underwater network management system
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 39 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30143:2020 |
Information technology — Underwater acoustic sensor network (UWASN) — Application profiles |
ISO/IEC 30143:2020 provides the guidelines for designing and developing new applications in the underwater environment such as fish farming, environment monitoring, harbour security, etc. This document also:
• provides the components required for developing the application;
• provides instructions for modelling the application with examples;
• helps the user to understand the communication between the elements in the application for modelling the communication between elements;
• guides the user with the design process of underwater applications.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 38 |
Technical Committee |
35.110
Networking
|
| ISO/IEC 30144:2020 |
Information technology — Sensor network system architecture for power substations |
This document specifies intelligent wireless sensor network (iWSN) from the perspectives of iWSN's system infrastructure and communications internal and external to the infrastructure, and technical requirements for iWSN to realize smart electrical power substations.
|
Published |
2020-10 |
Edition : 1 |
Number of pages : 36 |
Technical Committee |
35.110
Networking
;
29.240.10
Substations. Surge arresters
|
| ISO/IEC TR 30148:2019 |
Internet of Things (IoT) — Technical requirements and application of sensor network for wireless gas meters. |
This document describes
? the structure of wireless gas meter networks, and
? the application protocol of wireless gas meter networks.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
35.110
Networking
|
| ISO/DTR 37178 |
Smart community infrastructures — Data exchange and sharing for lamppost network in smart community |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
35.110
Networking
;
13.020.20
Environmental economics. Sustainability
|
| ISO/IEC 11571:1994 |
Information technology — Telecommunications and information exchange between systems — Numbering and sub-addressing in private integrated services networks |
|
Withdrawn |
1994-05 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11571:1998 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Networks — Addressing |
This International Standard defines the requirements for the handling of network addresses for the identification of entities
which use or provide telecommunication services offered by Private Integrated Services Networks (PISNs). This International
Standard covers numbering, including the requirements for the support of a Private Numbering Plan, the addressing of
network service access points for open systems interconnection (OSI NSAP addressing), and the support of subaddressing.
This International Standard is applicable to Private Integrated Services Network Exchanges with broad-band and narrow-band
capabilities (PINX) and to terminals to be attached to the access of PINXs. Any use by a PINX of the Support of Private
Numbering Plans supplementary service provided by a public ISDN is outside the scope of this International Standard.
Although this International Standard does not explicitly describe its application to location-independent (mobile) addressable
entities, this application is not precluded.
|
Published |
1998-12 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11572:1997 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network (PISN) — Circuit Mode Bearer Services — Inter-Exchange Signalling Procedures and Protocol |
|
Withdrawn |
1997-06 |
Edition : 2 |
Number of pages : 99 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13863:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Path replacement additional network feature |
|
Withdrawn |
1995-10 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11572:2000 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Circuit mode bearer services — Inter-exchange signalling procedures and protocol |
This International Standard defines the signalling procedures and protocol for the purpose of circuit-switched Call Control at
the Q-reference point between Private Integrated Network Exchanges (PINXs) connected together within a Private Integrated
Services Network (PISN).
The Q reference point is defined in ISO/IEC 11579-1.
This International Standard is based upon that described in ITU-T Recommendation Q.931, including the provisions for
symmetrical operation described in annex D of that recommendation.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International
Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and
stage 2 specifications in ECMA-142, ECMA-148 and ISO/IEC 11584.
This International Standard is applicable to PINXs which interconnect to form a PISN.
Annex ZC is an integral part of this International Standard.
|
Published |
2000-03 |
Edition : 3 |
Number of pages : 137 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11573:1994 |
Information technology — Telecommunications and information exchange between systems — Synchronization methods and technical requirements for Private Integrated Services Networks |
Contains requirements necessary for the synchronization of PISNs. Establishes technical criteria necessary in the design of a synchronization plan for a PISN.
|
Published |
1994-12 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11574:1994 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Circuit-mode 64 kbit/s bearer services — Service description, functional capabilities and information flows |
|
Withdrawn |
1994-12 |
Edition : 1 |
Number of pages : 63 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11574:2000 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Circuit-mode 64 kbit/s bearer services — Service description, functional capabilities and information flows |
This International Standard specifies the service description and control aspects, including functional capabilities and
information flows, of standardised circuit-mode bearer services which may be supported by a Private Integrated Services
Network (PISN).
This International Standard includes the following basic services:
_ Circuit-mode 64 kbit/s unrestricted 8 kHz structured bearer service category;
_ Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for speech information transfer;
_ Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for 3,1 kHz audio information transfer.
A PISN shall support at least one of the above three bearer services to conform with this International Standard.
The scope of this International Standard does not include:
_ the negotiation of service at call establishment time,
_ the change of service during a call, and
_ unidirectional services.
This International Standard includes optional procedures for the provision of functions equivalent to the following public ISDN
supplementary services: Subaddress and Multiple Subscriber Number.
NOTE 1 - Supplementary services and other bearer services which can be used in conjunction with 64 kbit/s circuit switched bearer services
specified in this International Standard are dealt with in other standards.
NOTE 2 - Service specifications are based on information concerning the corresponding public ISDN service available at the time of
publication of this International Standard.
NOTE 3 - ITU-T treat Subaddressing and Multiple Subscriber Number as supplementary services.
NOTE 4 - The use of the Direct Dial In supplementary service of a public ISDN for calls incoming to a PISN from a public ISDN is regarded
as part of the basic services in a PISN.
NOTE 5 - The use of the Calling Line Identification Presentation and Connected Line Identification Presentation supplementary services of a
public ISDN for obtaining the Originating Number or the Connected Number of a call from or to a public ISDN is regarded as part of the
basic services in a PISN.
NOTE 6 - The provision (either explicitly or implicitly) by the user to the network, of its own number (Originating Number or Connected
Number), and the provision of an Originating Number or a Connected Number by a PISN to another network is a part of the basic services in
a PISN and not a part of the Calling Line Identification Presentation and Connected Line Identification Presentation supplementary services.
Those supplementary services are concerned only with the presentation of the number from the network to the served PISN user.
|
Published |
2000-03 |
Edition : 2 |
Number of pages : 87 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11579-1:1994 |
Information technology — Telecommunications and information exchange between systems — Private integrated services network — Part 1: Reference configuration for PISN Exchanges (PINX) |
Specifies PINX reference configuration, reference points, use of the PINX reference configuration. The configuration specified is not intended to require any specific implementation of a PINX, but only to provide guidance for the specification of PINX capabilities. It is sufficient to support ISDN-like applications and can be extended to also support non-ISDN-like application. It describes a conceptual PINX. By combining multiple PINXs to a private integrated services network it becomes applicable to a PISN.
|
Published |
1994-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11579-2:1999 |
Information technology — Telecommunications and information exchange between systems — Private integrated services network — Part 2: Reference configuration for HS-PISN Exchanges (HS-PINX) |
This part of ISO/IEC 11579 specifies a reference configuration (RC) for high-speed private integrated services
network exchanges (HS-PINX), for their interconnection to form high-speed private integrated services networks
(HS-PISN). The configuration is intended to provide guidance for the specification of PINX capabilities, but does not
impose any specific implementation of a HS-PINX.
This RC describes a conceptual HS-PINX. By combining multiple HS-PINXs to a high-speed private integrated
services network the RC becomes applicable to a HS-PISN. This is generically described in ISO/IEC 11579-1.
This RC satisfies the support of all HS applications, such as LAN, MAN, B-ISDN, etc.
|
Published |
1999-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13871:1995 |
Information technology — Telecommunications and information exchange between systems — Private telecommunications networks — Digital channel aggregation |
Is one of International Standards designed to facilitate the global interconnection of applications across both private telecommunications networks and public ISDNs. This is achieved by ensuring compatibility and interworking of services offered by the private and public networks.
|
Published |
1995-12 |
Edition : 1 |
Number of pages : 93 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO 6977:1983 |
Natural gas — Determination of water and methanol contents — Gas chromatographic method |
|
Withdrawn |
1983-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
75.060
Natural gas
|
| ISO/IEC 11579-3:1999 |
Information technology — Private integrated services network — Part 3: Reference configuration for PINX extension lines |
This part of ISO/IEC 11579 specifies a reference configuration (RC) for the extension line of a private integrated
services network exchange (PINX) including high level functions in addition to the physical termination system
specified in part 1 of ISO/IEC 11579.
Since such high level functions appear application dependent and can occur, in principle, in any multiplicity and
combination, no firm allocation of functional groupings and thus no firm reference points can be indicated. Instead,
the principles for combining functional groupings associated with the physical termination system and allocating
reference points are specified in this part of ISO/IEC 11579.
Examples for some combinations of functional groupings and the allocation of reference points are given in
annex A.
The principle is not intended to require any specific implementation of a PINX, but only to provide guidance for the
specification of PINX capabilities.
The principle is sufficient to support ISDN-like applications. It can be extended to also support non-ISDN-like
applications.
|
Published |
1999-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11582:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Generic functional protocol for the support of supplementary services — Inter-exchange signalling procedures and protocol |
Defines the signalling protocol for the control of Supplementary services and Additional Network Features (ANFs) at the Q reference point. The protocol ist part of Private Signalling system No. 1 (PSS1).
|
Withdrawn |
1995-06 |
Edition : 1 |
Number of pages : 79 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11582:1995/Cor 1:1999 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Generic functional protocol for the support of supplementary services — Inter-exchange signalling procedures and protocol — Technical Corrigendum 1 |
|
Withdrawn |
1999-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11582:1995/Cor 2:2000 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Generic functional protocol for the support of supplementary services — Inter-exchange signalling procedures and protocol — Technical Corrigendum 2 |
|
Withdrawn |
2000-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11582:2002 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Generic functional protocol for the support of supplementary services — Inter-exchange signalling procedures and protocol |
ISO/IEC 11582:2002 defines the signalling protocol for the control of Supplementary Services and Additional Network Features (ANFs) at the Q reference point. The protocol is part of Private Signalling System no. 1 (PSS1), known informally as QSIG. The Q reference point exists between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN) and is defined in ISO/IEC 11579-1. Detailed procedures applicable to individual supplementary services and ANFs are beyond the scope of ISO/IEC 11582:2002 and will be specified by other standards for those services which are standardised and by individual manufacturers for proprietary services using the capabilities defined in ISO/IEC 11582:2002.
ISO/IEC 11572 defines the Layer 3 protocol for circuit-switched call control at the Q reference point. ISO/IEC 11582:2002 defines additional protocol procedures, to be used in conjunction with those defined in ISO/IEC 11572 for the control of supplementary services and ANFs.
NOTE 1 Typical examples of the application of these generic functional procedures to some supplementary services are provided in annex C, for explanatory and illustrative purposes only.
NOTE 2 Specific supplementary services and Additional Network Features may require additional information transfer mechanisms which are service or feature specific and are beyond the scope of ISO/IEC 11582:2002.
|
Published |
2002-07 |
Edition : 2 |
Number of pages : 112 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 11584:1996 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Circuit-mode multi-rate bearer services — Service description, functional capabilities and information flows |
Deals with the service specification functional model and information flows applicable to Private Integrated Services Network (PISN). Uses the ISDN concepts as developed by ITU T (formerly CCITT) and is also within the framework of standards for Open Systems Interconnection (OSI) as defined by ISO.
|
Published |
1996-03 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13241:1997 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Route Restriction Class additional network feature |
|
Published |
1997-06 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13242:1997 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Route Restriction Class additional network feature |
|
Published |
1997-06 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13246:1997 |
Information technology — Telecommunications and information exchange between systems — Broadband Private Integrated Services Network — Inter-exchange signalling protocol — Signalling ATM adaptation layer |
This International Standard specifies the signalling ATM adaptation layer (SAAL) protocol used at the interface between Broadband PINXs and between Broadband PISNs within the framework of the B-QSIG signalling System protocol family. The B-QSIG SAAL uses the functions provided by the ATM layer, and provides the Services required by the B-QSIG Layer 3 signalling protocols.
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13863:1998 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Path replacement additional network feature |
This International Standard specifies the Path Replacement additional network feature (ANF-PR), which is applicable to
various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in
ISO/IEC 11574.
ANF-PR is a feature which applies to an established call, allowing that call's connection between Private Integrated Services
Network Exchanges (PINXs) to be replaced by a new connection. If the new connection is required to satisfy certain criteria,
ANF-PR should be used in conjunction with other supplementary services and/or ANFs. Annex A gives examples of the
circumstances under which ANF-PR can be used and criteria which can govern the selection of the new connection.
Additional network feature specifications are produced in three stages, according to the method described in CCITT
Recommendation I.130 for supplementary services. This International Standard contains the stage 1 and stage 2 specifications
of ANF-PR. The stage 1 specification (clause 6) specifies the feature as seen by an entity which initiates path replacement, the
ANF-PR user. The stage 2 specification (clauses 7, 8 and 9) identifies the functional entities involved in the feature and the
information flows between them. Clause 7 contains the stage 2 specification for basic operation of the feature. Clause 8
contains the stage 2 specification for an enhanced mode of working which can be employed when supported by all the
equipment involved. It allows some of the elements of the old connection to be re-used. Clause 9 contains the stage 2
specification for an optional enhancement of the basic operation of the feature. It allows the ANF-PR user to be located in any
PINX in the old connection and to decide the direction of the new connection.
|
Published |
1998-12 |
Edition : 2 |
Number of pages : 37 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13864:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Name identification supplementary services |
Is one of International Standards defining services and signalling protocols applicable to Private Integrated Services Networks. The series uses the ISDN concepts as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection as defined by ISO/IEC. Specifies the Name Identification Supplementary Services.
|
Published |
1995-11 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13865:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call transfer supplementary service |
Is one of a series of standards defining services and signalling protocols applicable to Private Services Networks (PISN). The Series uses ISDN concepts as developed by ITU-T and conforms to the framework of Standards for Open Systems Interconnections as defined by ISO/IEC. Specifies the Call Transfer supplementary service.
|
Withdrawn |
1995-11 |
Edition : 1 |
Number of pages : 43 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13865:2003 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call Transfer supplementary service |
ISO/IEC 13865:2003 specifies Supplementary Service Call Transfer (SS-CT), which is applicable to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ISO/IEC 11574.
SS-CT is a supplementary service which enables a user to transform two of that user's calls (of which one must be answered) into a new call between the other two users of the two calls.
Supplementary service specifications are produced in three stages, according to the method described in ETS 300 387. ISO/IEC 13865:2003 contains the stage 1 and stage 2 specifications of SS-CT. The stage 1 specification (clause 6) specifies the supplementary service as seen by users of PISNs. The stage 2 specification (clauses 7 and 8) identifies the functional entities involved in the supplementary service and the information flows between them.
ISO/IEC 13865:2003 contains two stage 2 specifications reflecting different ways of operating the service within the network: transfer by join and transfer by rerouteing.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 34 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13866:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call completion supplementary services |
Is one of a series of standards defining services and signalling protocolls applicable to Private Services Networks (PISN). The Series uses ISDN concepts as developed by ITU-T and conforms to the framework of Standards for Open Systems Interconnections as defined by ISO/IEC. Specifies the Call Completion supplementary services.
|
Published |
1995-11 |
Edition : 1 |
Number of pages : 68 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13868:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Name identification supplementary services |
Is one of a series of standards defining services and signalling protocols applicable to Private Services Networks (PISN). The Series uses ISDN concepts as developed by ITU-T and conforms to the framework of Standards for Open Systems Interconnections as defined by ISO/IEC. Specifies the Stage 3, signalling protocols for use at the Q reference point in support of the following name identification supplementary services CNIP and CONP.
|
Withdrawn |
1995-11 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13868:1995/Amd 1:2001 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Name identification supplementary services — Amendment 1: Additional character sets for European languages |
|
Withdrawn |
2001-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 9592-3:1997 |
Information technology — Computer graphics and image processing — Programmer's Hierarchical Interactive Graphics System (PHIGS) — Part 3: Specification for clear-text encoding of archive file |
|
Published |
1997-11 |
Edition : 2 |
Number of pages : 43 |
Technical Committee |
35.140
Computer graphics
|
| ISO/IEC 13868:2003 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Name identification supplementary services |
ISO/IEC 13868:2003 specifies the signalling protocol for the support of name identification supplementary services at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). The name identification supplementary services are Calling Name Identification Presentation (SS-CNIP) and Connected Name Identification Presentation (SS-CONP).
Calling Name Identification Presentation (CNIP) is a supplementary service which is offered to the called user and which provides the name of the calling user (calling party name) to the called user.
Connected Name Identification Presentation (CONP) is a supplementary service which is offered to the calling user and which provides to the calling user the following:
the name of the user who answers the call (connected party name);optionally the name of the alerting user (called party name);optionally the name of the called user who cannot be reached (busy party name).
The supplementary service Calling/Connected Name Identification Restriction (CNIR) has no impact on the signalling at Q reference point.
Provision of a user's name to the PISN is outside the scope of ISO/IEC 13868:2003.
The Q reference point is defined in ISO/IEC 11579-1.
Service specifications are produced in three stages according to the method specified in ETS 300 387. ISO/IEC 13868:2003 contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 13864.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13869:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call transfer supplementary service |
Is one of a series of standards defining services and signalling protocols applicable to Private Services Networks (PISN). The Series uses ISDN concepts as developed by ITU-T and conforms to the framework of Standards for Open Systems Interconnections as defined by ISO/IEC. Specifies the Call transfer supplementary service.
|
Withdrawn |
1995-11 |
Edition : 1 |
Number of pages : 60 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13869:1995/Cor 1:1999 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call transfer supplementary service — Technical Corrigendum 1 |
|
Withdrawn |
1999-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13869:2003 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call Transfer supplementary service |
ISO/IEC 13869:2003 specifies the signalling protocol for the support of the Call Transfer supplementary service (SS-CT) at the Q reference point between Private Integrated Network services eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).
SS-CT is a supplementary service which enables a User to transform two of that User's calls (at least one of which must be answered) into a new call between the two other users in the two calls.
The Q reference point is defined in ISO/IEC 11579-1.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. ISO/IEC 13869:2003 contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 13865.
The signalling protocol for SS-CT operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.
ISO/IEC 13869:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between Call Transfer and other supplementary services and ANFs.
ISO/IEC 13869:2003 is applicable to PINXs which can interconnect to form a PISN.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 53 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13870:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call completion supplementary services |
Is one of a series of standards defining services and signalling protocols applicable to Private Services Networks (PISN). The Series uses ISDN concepts as developed by ITU-T and conforms to the framework of Standards for Open Systems Interconnections as defined by ISO/IEC. Specifies the the Call Completion supplementary service.
|
Withdrawn |
1995-11 |
Edition : 1 |
Number of pages : 68 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13870:2001 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call completion supplementary services |
|
Withdrawn |
2001-07 |
Edition : 2 |
Number of pages : 64 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13870:2003 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call Completion supplementary services |
ISO/IEC 13870:2003 specifies the signalling protocol for the support of the Call Completion supplementary services at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). The Call Completion supplementary services are Completion of Calls to Busy Subscribers (SS-CCBS) and Completion of Calls on No Reply (SS-CCNR).
SS-CCBS enables a calling User A, encountering a busy destination User B, to have the call completed when User B becomes not busy, without having to make a new call attempt.
SS-CCNR enables a calling User A, encountering a destination User B that, though alerted, does not answer, to have the call completed when User B becomes not busy again after a period of activity, without having to make a new call attempt.
The Q reference point is defined in ISO/IEC 11579-1.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. ISO/IEC 13870:2003 contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 13866.
The signalling protocols for SS-CCBS and SS-CCNR operate on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.
ISO/IEC 13870:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-CC and other supplementary services and ANFs.
ISO/IEC 13870:2003 is applicable to PINXs which can interconnect to form a PISN.
|
Published |
2003-04 |
Edition : 3 |
Number of pages : 68 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 9592-4:1992 |
Information processing systems — Computer graphics — Programmer's Hierarchical Interactive Graphics System (PHIGS) — Part 4: Plus Lumière und Surfaces, PHIGS PLUS |
|
Withdrawn |
1992-09 |
Edition : 1 |
Number of pages : 170 |
Technical Committee |
35.140
Computer graphics
|
| ISO/IEC 13872:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call diversion supplementary services |
Specifies the supplementary services Call Forwarding Unconditional (CFU), Call Forwarding Busy (CFB), Call Forwarding No Reply (CFNR) and Call Deflection (CD), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574.
|
Withdrawn |
1995-12 |
Edition : 1 |
Number of pages : 80 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13872:2003 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Call Diversion supplementary services |
ISO/IEC 13872:2003 specifies the supplementary services Call Forwarding Unconditional (CFU), Call Forwarding Busy (CFB), Call Forwarding No Reply (CFNR) and Call Deflection (CD), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574.
SS-CFU, SS-CFB and SS-CFNR are supplementary services which apply during call establishment providing a diversion of an incoming call to another destination. SS-CD is a supplementary service which allows a served user to respond to an incoming call by requesting redirection of that call to another number specified in the response.
Supplementary service specifications are produced in three stages, according to the method described in ETS 300 387. ISO/IEC 13872:2003 contains the stage 1 and stage 2 specifications of the Call Diversion supplementary services. The stage 1 specifications (Clauses 6, 7, 8 and 9) specify the supplementary services as seen by users of PISNs. The stage 2 specification (Clause 10) identifies the functional entities involved in the supplementary services and the information flows between them.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 72 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13873:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call diversion supplementary services |
Specifies the signalling protocol for the support of Call Diversion supplementary services (SS-DIV) at the Q reference point between Private Integrated services Network Exchanges (PINXs) connected together within a Private Integrated Services Network.
|
Withdrawn |
1995-12 |
Edition : 1 |
Number of pages : 71 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13873:1995/Cor 1:1999 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call diversion supplementary services — Technical Corrigendum 1 |
|
Withdrawn |
1999-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13873:2003 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call Diversion supplementary services |
ISO/IEC 13873:2003 specifies the signalling protocol for the support of Call Diversion supplementary services (SS-DIV) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). The Call Diversion supplementary services are Call Forwarding Unconditional (SS-CFU), Call Forwarding Busy (SS-CFB), Call Forwarding No Reply (SS-CFNR) and Call Deflection (SS-CD).
SS-CFU, SS-CFB, SS-CFNR and SS-CD are supplementary services which permit a served user to have the PISN send all or specific incoming calls addressed to the served user's PISN number to another number.
The Q reference point is defined in ISO/IEC 11579-1.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. ISO/IEC 13873:2003 contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 13872.
The signalling protocol for SS-DIV operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572 and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.
ISO/IEC 13873:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-DIV and other supplementary services and ANFs.
ISO/IEC 13873:2003 is applicable to PINXs which can be interconnected to form a PISN.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 72 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13874:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Path replacement additional network feature |
|
Withdrawn |
1995-10 |
Edition : 1 |
Number of pages : 35 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 13874:1999 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Path replacement additional network feature |
|
Withdrawn |
1999-01 |
Edition : 2 |
Number of pages : 41 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 14843:1996 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call offer supplementary service |
Describes the signalling protocol for the support of the Call Offer supplementary service (SS-CO) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN).
|
Withdrawn |
1996-09 |
Edition : 1 |
Number of pages : 35 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 9592-1:1989/Cor 1:1994 |
Information processing systems — Computer graphics — Programmer's Hierarchical Interactive Graphics System (PHIGS) — Part 1: Functional description — Technical Corrigendum 1 |
|
Withdrawn |
1994-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
35.140
Computer graphics
|
| ISO/IEC 13874:2003 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Path Replacement additional network feature |
ISO/IEC 13874:2003 specifies the signalling protocol for the support of the Path Replacement additional network feature (ANF-PR) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).
ANF-PR is a feature which applies to an established call, allowing that call's connection between PINXs to be replaced by a new connection.
The Q reference point is defined in ISO/IEC 11579-1.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. ISO/IEC 13874:2003 contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 13863.
The signalling protocol for ANF-PR operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.
ISO/IEC 13874:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between ANF-PR and other supplementary services and ANFs.
ISO/IEC 13874:2003 is applicable to PINXs which can interconnect to form a PISN.
|
Published |
2003-04 |
Edition : 3 |
Number of pages : 45 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 14136:1995 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Identification supplementary services |
Specifies the Calling Line Identification Presentation (SS-CLIP), Connected Line Identification Presentation (SS-COLP) and Calling/Connected Line Identification Restriction (SS-CLIR), which are applicable to various basic services supported by Private Integrated Services Networks (PISN).
|
Published |
1995-06 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC 14474:1998 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Functional requirements for static circuit-mode inter-PINX connections |
This International Standard is a part of the functional requirements for the Private Integrated Services Network (PISN)
and defines the functions and procedures that are required by Private Integrated Services Network exchanges (PINXs)
and the intervening network (IVN) in order to establish Inter-PINX Connections (IPC). The IPC is used for the transfer
of signalling and user information between PINXs.
The Private Signalling System No.1 (PSS1) as defined in ISO/IEC 11572 and 11574 defines the signalling procedures
and protocol for call control between PINXs at the Q reference point. These procedures are independent of the types of
IVNs, called scenarios used to interconnect the PINXs. ISO/IEC TR14475 describes the use of various types of IVNs
which provide the interconnections of PINXs.
In order to connect a PINX to another PINX, mapping functions are required to adapt the specific interfaces at the C
reference point to the application at the Q reference point. As such, mapping functions provide for physical adaptation
to the interface at the C reference point. Mapping functions also provide for the mapping of user channels and
signalling information at the Q reference point to the appropriate channels or time-slots at the C reference point. The C
and Q reference points are defined in ISO/IEC 11579-1.
The types of interfaces at the C reference point covered by this International Standard are:
[1] 1544 kbit/s unstructured digital leased line
[2] 1544 kbit/s structured digital leased line
[3] 2048 kbit/s unstructured digital leased line
[4] 2048 kbit/s structured digital leased line
[5] 64 kbit/s unrestricted digital leased line
[6] 1544 kbit/s ISDN Primary Rate user-network layer 1 interface
[7] 2048 kbit/s ISDN Primary Rate user-network layer 1 interface
[8] ISDN Basic Rate user-network layer 1 interface
At the Q reference point the mappings provide a 64 kbit/s service for user channels and a packet mode service for the
signalling channel. The applied mapping is a static mapping, i.e. there is a fixed relationship between user and
signalling channels at the Q reference point and the timeslots of the interface at the C reference point. Any changes are
subject to administrative actions.
This International Standard specifies PINX mapping functions between the Q reference point and the C reference point
for IVNs which provide either dedicated or semi-permanent, non-user activation, circuit-mode IPCs. The dedicated IPC
is the connection permanently established, usually for the duration of a contractual period. The semi-permanent IPC is
the connection whose resources are reserved for specified times during a contractual period. The semi-permanent IPC is
established by management control with or without user activations. In this International Standard, the semi-permanent
IPC established by management control with user activation is outside the scope.
The IVN can be a dedicated physical link, dedicated transmission system or a cross connect system, or semi-permanent
connection system. IVNs which include inverse mulitlexer techniques (e.g. channel aggregation in accordance with
ISO/IEC 13871) are covered by this International Standard so far as they support one of the interfaces listed above.
This International Standard also specifies mapping information. At both sides of the PINX, mapping information is
required to administer the scenarios.
This International Standard is applicable to PINXs which can be interconnected to form a Private Integrated Services
Network (PISN) and which support signalling protocols at the Q reference point.
|
Published |
1998-12 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
33.040.35
Telephone networks
|
| ISO/IEC TR 14475:1996 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Architecture and Scenarios for Private Integrated Services Networking |
Concerns with Private Integrated Service Networks (PISNs) comprising one or more than one PISN exchanges (PINX) interconnected by inter-PINX connections (IPCs). Specifies unter-PINX connections that are provided by intervening networks (IVNs), and the way in which these are handled by PINXs to provide a platform for inter-PINX communication. Identifies the standardization to inter-connect PINXs and general techniques, procedures and protocolls for all types of IVNs.
|
Withdrawn |
1996-04 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
33.040.35
Telephone networks
|