| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 2242:1972 |
Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of photoflood illumination |
|
Withdrawn |
1972-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/R 2243:1972 |
Withdrawal of ISO 2243-1972 |
|
Withdrawn |
1972-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2691:1973 |
Photography — Expendable photoflash lamps — Definitions and requirements for luminous flux/time characteristics |
|
Withdrawn |
1973-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2691:1987 |
Photography — Expendable photoflash lamps (without integral reflector) — Defintions and requirements for luminous flux/time characteristics |
The specifications apply to photoflash lamps in which the light is produced by a combustion within a transparent envelope, initiated by an electrical contact. the important time intervals of the luminous flux/time characteristics for such lamps are given, and the lamps are classified on the basis of these intervals.
|
Withdrawn |
1987-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2720:1974 |
Photography — General purpose photographic exposure meters (photoelectric type) — Guide to product specification |
Specified are calibration levels and test conditions for general-purpose photoelectric exposure meters which measure reflected or incident light, or both, in determining photographic exposure for camera use. The specifications apply to exposure meters containing a light-sensitive element, and indicating electrical instrument, a directional system and a calculator to correlate the meter indications with the camera exposure settings.
|
Published |
1974-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2721:1982 |
Photography — Cameras — Automatic controls of exposure |
ISO 2721:1982 defines the exposure at the focal plane of cameras for values of two exposure parameters, i.e. field luminance and film speed. It also gives methods of evaluating other photometric characteristics. The data apply to automatic exposure control systems which are built into cameras or coupled with them to regulate the exposure in the focal plane in dependence of the various exposure parameters.
ISO 2721:1982 is applicable to film-based cameras and it is not applicable to digital cameras.
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TR 2721:1975 |
Withdrawal of ISO/TR 2721-1975 |
|
Withdrawn |
1975-02 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 6728:1983 |
Photography — Camera lenses — Determination of ISO colour contribution index (ISO/CCI) |
Describes the spectral characteristics of an ISO standard camera lens and a method for determining the contribution of spectrally selective lenses to the colour of the final film image. The procedure can also be applied to other optical elements in the camera.
|
Published |
1983-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2721:2013 |
Photography — Film-based cameras — Automatic controls of exposure |
ISO 2721:2013 specifies the exposure at the focal plane of film-based cameras for values of two exposure parameters, i.e. field luminance and film speed, and also describes methods of evaluating other photometric characteristics, such as the acceptance angles of the photoelectric system.
ISO 2721:2013 applies to automatic exposure control systems which are built into film-based cameras or coupled with them to regulate the exposure in the focal plane as a function of the several exposure parameters.
|
Published |
2013-03 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2800:1973 |
Photography — Expendable photoflash lamps — Definition and evaluation of flashability |
The specifications are applicable to photoflash lamps in which the light is produced by an electrically initiated combustion within a transparent envelope. The "flashability" of an expendable photoflash lamp is defined, and standard methods for its evaluation and performance requirements are described.
|
Withdrawn |
1973-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2827:1973 |
Photography — Determination of the light output of electronic flash equipment |
|
Withdrawn |
1973-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2827:1988 |
Photography — Electronic flash equipment — Determination of light output and performance |
Specified are methods of measurements and standards of performance for light output, angle of coverage, ready indication, recycle time and number of flashes for electronic flash equipment of the single flash type, which is primarily intended to provide illumination for photography with cameras in which the contacts that control the flash are closed when the camera shutter is fully or nearly fully open.
|
Published |
1988-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 3028:1974 |
Photography — Expendable photoflash lamps — Determination of relative spectral energy distribution for calculation of spectral distribution index |
|
Withdrawn |
1974-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 3028:1984 |
Photography — Camera flash illuminants — Determination of ISO spectral distribution index (ISO/SDI) |
Specifies a method for calculating a spectral distribution index to evaluate the ability of expendable flash and electronic flash units to produce photographic colour results comparable with those obtained with daylight-type films exposed to daylight illumination.
|
Published |
1984-10 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 5763:1982 |
Photography — Electronic flash equipment — Automatic control of exposure |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 5763:1989 |
Photography — Electronic flash equipment — Automatic control of exposure |
Specifies the methods for measuring the characteristics peculiar to the control such as accuracy and repeatability. Also lays down the numerical values of the integral of time of the object luminance and of the exposure given to an object by flash equipment with automatic exposure control, and the maximum deviation from these nominal values.
|
Published |
1989-10 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 6013:1978 |
Photography — Photo flashcubes — Colour coding of packages |
|
Withdrawn |
1978-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 6040:1978 |
Photography — Optical filters (mounted and unmounted) for photographic equipment — Dimensions and designations |
|
Withdrawn |
1978-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 6053:1979 |
Photography — Shutter cable release tip and socket — Dimensions |
Specified are the shape, basic dimensions and technical requirements of the screw threads of the shutter cable release tip and socket. The standard has been prepared with a view to ensuring the international interchangeability of cable releases.
|
Published |
1979-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 6516:1980 |
Photography — Photographic lenses — Distance scale markings |
Specified is a series of preferred values for the distance scale markings of photographic lenses. The preferred values are given for scales indicating the distance in metres and feet. The infinity mark is also specified.
|
Published |
1980-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 435:1975 |
Documentary reproduction — ISO conventional typographical character for legibility tests (ISO character) |
|
Withdrawn |
1975-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.080
Document imaging applications
|
| ISO 7329:1989 |
Photography — Slide projectors — Determination of temperature rise in the picture area using a glass sandwich test slide |
Specifies a measuring method for determining the temperature reached in the central part of a glass-mounted test slide used in a slide projector. The method is to provide a practical and repeatable way of comparing the performance of different slide temperatures which are higher or lower than those attained by glass-mounted slides.
|
Withdrawn |
1989-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 7589:1984 |
Photography — Illuminants for sensitometry — Specifications for daylight and incandescent tungsten |
Specifies the spectral characteristics of illuminants for sensitometry appropriate for evaluating camera films used for pictorial photography in natural daylight, studio tungsten, and photoflood, including both reversal and negative colour and black-and-white films. Describes also a method for evaluating the acceptability of illuminants for sensitometry.
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 7589:2002 |
Photography — Illuminants for sensitometry — Specifications for daylight, incandescent tungsten and printer |
This International Standard specifies the spectral characteristics of illuminants for sensitometry appropriate for
evaluating camera films used for pictorial photography in natural daylight, studio tungsten and photoflood, including
colour and black-and-white films, both reversal and negative types, and for evaluating black-and-white papers used
with incandescent tungsten printers. It also describes methods for evaluating the acceptability of illuminants for
sensitometry and specifies tolerances.
It does not include illuminants for use with colour papers, since this would need to take account of the coloured
mask of the negative material, for which no standard information is at present available.
|
Published |
2002-02 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 7943-1:1987 |
Photography — Overhead projectors — Part 1: Projection stages — Dimensions |
The projectors described here are the types most commonly used for educational and training purposes. Specialized projection equipment is not dealt with. This part of the standard covers the dimensions of projection stages and location pins to ensure compatibility between the projectors and transparencies.
|
Withdrawn |
1987-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 7943-2:1987 |
Photography — Overhead projectors — Part 2: Transparencies and transparency frames — Dimensions |
This part of the standard specifies the film type for transparencies and the dimensions of mounted and unmounted transparencies, including transparency frames, in order to ensure compatibility between the projectors and transparencies within each type of projector system described.
|
Withdrawn |
1987-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 7943-3:1987 |
Photography — Overhead projectors — Part 3: Film rolls, cores and winders — Dimensions |
In addition to the film roll core dimensions and film roll diameters, this part of the standard specifies the dimensions of the keys on winders for film rolls fitted to the projetor scroll units or attachments. It does not require that scroll units for one projector type accept film rolls intended for another type.
|
Withdrawn |
1987-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 8341:1989 |
Photography — Slide projectors and filmstrip projectors — Illumination test |
|
Withdrawn |
1989-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 8478:1996 |
Photography — Camera lenses — Measurement of ISO spectral transmittance |
Gives a method for measuring the spectral transmittance of camera lenses. Describes particular conditions for measuring the axial spectral transmittance over a wavelength range from 350 nm to 700 nm of camera lenses which are to be used mainly for taking pictures of very distant objects.
|
Withdrawn |
1996-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 8478:2017 |
Optics and photonics — Camera lenses — Measurement of ISO spectral transmittance |
ISO 8478:2017 specifies a method for measuring the spectral transmittance of camera lenses. It describes particular conditions for measuring the axial spectral transmittance, over a wavelength range from 350 nm to 700 nm, of camera lenses which are intended to be used mainly for taking pictures of very distant objects.
If the spectral transmittance values are used exclusively for the calculation of the ISO colour contribution index (see ISO 6728) throughout ISO 8478:2017, the wavelength range reads 370 nm to 680 nm.
ISO 8478:2017 is also applicable to mirror lenses (see Annex A).
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 8581:1994 |
Photography — Electronic flash equipment — Connectors to synchro-cord |
Specifies type and dimensions of the electrical connectors (plug and socket) to be used for electronic photoflash equipment. Gives a limited number of types of connector and the dimensions to be used for the connection between flash unit and flash synchro-cords.
|
Published |
1994-03 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 9336-1:1994 |
Optics and optical instruments — Optical transfer function — Application — Part 1: Interchangeable lenses for 35 mm still cameras |
Specifies a method of testing interchangeable lenses for 35 mm still cameras with a picture format of 24 mm × 36 mm in terms of imaging states aimed at making valid optical transfer function measurements. Does not cover special lenses for macrophotography.
|
Withdrawn |
1994-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 9336-1:2010 |
Optics and photonics — Optical transfer function — Application — Part 1: Interchangeable lenses for 35 mm still cameras |
ISO 9336‑1:2010 specifies a method of testing interchangeable lenses for 35 mm still cameras with a picture format of 24 mm x 36 mm in terms of imaging states aimed at making valid optical transfer function measurements.
|
Published |
2010-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 9559:1989 |
Photography — 35 mm filmstrip projectors — Specifications for frame masks |
Specified are the dimensions of and requirements for frame masks in the projectors. Picture framing on filmstrip is achieved either by an opaque border directly exposed on the film or by means of an additional frame mask in the projector.
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 9767:1990 |
Photography — Overhead projectors — Methods for measuring and reporting performance characteristics |
Specifies methods of measurement for light output, uniformity of screen illumination, picture outline distortion, maximum available projection elevation and temperature rise on the projection stages of overhead projectors. Includes a form of reporting the results of the measurements.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 10157:1991 |
Photography — Flash exposure meter — Requirements |
|
Published |
1991-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 10330:1992 |
Photography — Synchronizers, ignition circuits and connectors for cameras and photoflash units — Electrical characteristics and test methods |
Requirements for synchronizer and ignition circuit are concerned with polarities of terminals, voltage across and current through terminals, for ignition circuit with operation, for synchronizer with dynamic characteristics and leakage current, and for cables with resistance, capacitance, and insulation resistance. Test methods relate to ignition circuit operation, synchronizer dynamic characteristics, and synchronizer leakage current.
|
Withdrawn |
1992-11 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 10330:2002 |
Photography — Synchronizers, ignition circuits and connectors for cameras and photoflash units — Electrical characteristics and test methods |
ISO 10330 specifies the electrical requirements of the camera synchronizer, the ignition circuit in the photoflash unit and the cable to connect these, and the test methods to secure positive firing of the photoflash unit.
|
Published |
2002-08 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 10503:1991 |
Photography — Expendable reflectored photoflash lamp arrays — Definitions and requirements for luminous flux/time characteristics |
Gives terms and definitions. The important time intervalls of characteristics, the time integral of luminous intensity, and tolerances for the ISO spectral distribution index are defined for the various types of arrays.
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 10996:1999 |
Photography — Still-picture projectors — Determination of noise emissions |
|
Withdrawn |
1999-03 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 11106-1:1997 |
Photography — Slide trays for projectors — Part 1: Straight slide tray, open type (European design) |
Specifies the essential dimensions of a straight slide tray, open type (European design), for projector slides of the preferred international nominal size 5 cm × 5 cm complying with ISO 1755, with a capacity of 36 slides or 50 slides. It includes a testing gauge for checking the tray profile and gear system.
|
Published |
1997-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 11106-2:1997 |
Photography — Slide trays for projectors — Part 2: Straight slide tray, closed type (Japanese design) |
Specifies the essential dimensions of a straight slide tray, closed type (Japanese design), for projector slides of the preferred international nominal size 5 cm × 5 cm complying with ISO 1755, with a capacity of 36 slides or 50 slides.
|
Withdrawn |
1997-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 446:1975 |
Microcopying — ISO No. 1 Mire — Description and use in photographic documentary reproduction |
|
Withdrawn |
1975-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.080
Document imaging applications
|
| ISO 11314:1995 |
Photography — Projectors — Image size/projection distance calculations |
Specifies a method of calculating the expected size of the projected image from any type of projektor given the focal length of the projection lens and the projection distance.
|
Withdrawn |
1995-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 11315-1:1997 |
Photography — Projection in indoor rooms — Part 1: Screen illumination test for still projectors |
|
Published |
1997-11 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 11315-2:1997 |
Photography — Projection in indoor rooms — Part 2: Screen luminance test for still and video projection |
|
Published |
1997-11 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 11315-3:1999 |
Photography — Projection in indoor rooms — Part 3: Classification of transmitting projection screens and measurement of their transmitted luminance levels |
|
Withdrawn |
1999-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 11316:1999 |
Photography — Projection of still pictures — Measuring methods for the evaluation of imaging properties |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 12231-1:2020 |
Photography — Electronic still picture imaging terminology — Part 1: Supplemental vocabulary |
This document defines terms used in electronic still picture imaging that have not been defined by other ISO/TC 42 standards, Technical Specifications or Technical Reports.
|
Published |
2020-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
01.040.37
Image technology (Vocabularies)
;
37.040.10
Photographic equipment. Projectors
|
| ISO/TR 12231-2:2022 |
Photography — Electronic still picture imaging terminology — Part 2: Other defined terms |
This document provides a list of terms defined in other ISO/TC 42 International Standards, Technical Specifications and Technical Reports relevant to electronic still picture imaging.
This document is intended to be used in conjunction with the definition sources listed.
|
Published |
2022-05 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
01.040.37
Image technology (Vocabularies)
;
37.040.10
Photographic equipment. Projectors
|
| ISO 12231:1997 |
Photography — Electronic still-picture cameras — Terminology |
|
Withdrawn |
1997-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
01.040.37
Image technology (Vocabularies)
;
37.040.10
Photographic equipment. Projectors
|
| ISO 12231:2005 |
Photography — Electronic still picture imaging — Vocabulary |
ISO 12231:2005 defines terms used in electronic still picture imaging.
Only terms related to electronic still picture imaging are included. These terms are relevant to the current tasks or are of general interest in electronic still picture imaging.
|
Withdrawn |
2005-02 |
Edition : 2 |
Number of pages : 45 |
Technical Committee |
01.040.37
Image technology (Vocabularies)
;
37.040.10
Photographic equipment. Projectors
|
| ISO 12231:2012 |
Photography — Electronic still picture imaging — Vocabulary |
1 Scope
This International Standard defines terms used in electronic still picture imaging.
Only terms related to electronic still picture imaging are defined. These terms are relevant to current tasks or are of general interest in electronic still picture imaging.
|
Withdrawn |
2012-02 |
Edition : 3 |
Number of pages : 35 |
Technical Committee |
01.040.37
Image technology (Vocabularies)
;
37.040.10
Photographic equipment. Projectors
|
| ISO 12232:1998 |
Photography — Electronic still-picture cameras — Determination of ISO speed |
|
Withdrawn |
1998-08 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 12232:2006 |
Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index |
ISO 12232:2006 specifies the method for assigning and reporting ISO speed ratings, ISO speed latitude ratings, standard output sensitivity values, and recommended exposure index values, for digital still cameras. ISO 12232:2006 is applicable to both monochrome and colour digital still cameras.
|
Withdrawn |
2006-04 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 3272-2:1978/Amd 1:1980 |
Microfilming of technical drawings and other drawing office documents — Part 2: Quality criteria and control — Amendment 1 |
|
Withdrawn |
1980-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.080
Document imaging applications
;
01.100.01
Technical drawings in general
|
| ISO 12232:2019 |
Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index |
This document specifies the method for assigning and reporting ISO speed ratings, ISO speed latitude ratings, standard output sensitivity values, and recommended exposure index values, for digital still cameras. It is applicable to both monochrome and colour digital still cameras.
|
Published |
2019-02 |
Edition : 3 |
Number of pages : 21 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 12232:2019/Amd 1:2020 |
Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index — Amendment 1: Determination of encoding-relative sensitivity (ERS) |
|
Published |
2020-06 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 12233:2000 |
Photography — Electronic still-picture cameras — Resolution measurements |
|
Withdrawn |
2000-09 |
Edition : 1 |
Number of pages : 32 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 12233:2014 |
Photography — Electronic still picture imaging — Resolution and spatial frequency responses |
ISO 12233:2014 specifies methods for measuring the resolution and the SFR of electronic still-picture cameras. It is applicable to the measurement of both monochrome and colour cameras which output digital data or analog video signals.
|
Withdrawn |
2014-02 |
Edition : 2 |
Number of pages : 50 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 12233:2017 |
Photography — Electronic still picture imaging — Resolution and spatial frequency responses |
ISO 12233:2017 specifies methods for measuring the resolution and the SFR of electronic still-picture cameras. It is applicable to the measurement of both monochrome and colour cameras which output digital data or analogue video signals.
|
Withdrawn |
2017-01 |
Edition : 3 |
Number of pages : 49 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 12233:2023 |
Photography — Electronic still picture imaging — Resolution and spatial frequency responses |
This document specifies methods for measuring the resolution and the spatial frequency response (SFR) of electronic still-picture cameras. It is applicable to the measurement of both monochrome and colour cameras which output digital data or analogue video signals.
|
Published |
2023-02 |
Edition : 4 |
Number of pages : 75 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 14524:1999 |
Photography — Electronic still-picture cameras — Methods for measuring opto-electronic conversion functions (OECFs) |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 14524:2009 |
Photography — Electronic still-picture cameras — Methods for measuring opto-electronic conversion functions (OECFs) |
ISO 14524:2009 specifies methods for the measurement of opto-electronic conversion functions (OECFs) of electronic still-picture cameras whose output is encoded as a digital image file. The OECF is defined as the relationship between the focal plane log exposures or scene log luminances, and the digital output levels of an opto-electronic digital image capture system.
ISO 14524:2009 applies to both monochrome and colour electronic still picture cameras.
|
Published |
2009-02 |
Edition : 2 |
Number of pages : 23 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 14808:1997 |
Photography — Composition of 135-size film canisters |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 15781:2013 |
Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time |
ISO 15781:2013 specifies how to measure and report the shooting time lag, shutter release time lag, shooting rate and start-up time for digital still cameras, including camera modules in phones and tablet computers. It includes a method that uses control signals inside the digital still camera and a method that determines the timing values without requiring access to the inside of the digital still camera.
|
Withdrawn |
2013-02 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 15781:2015 |
Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time |
ISO 15781:2015 specifies how to measure and report the shooting time lag, shutter release time lag, shooting rate, and start-up time for digital still cameras including camera modules in phones and tablet computers. It includes a method that uses control signals inside the digital still camera and a method that determines the timing values without requiring access to the inside of the digital still camera.
Depending on the method used to start the timing device, there can be a time lag between the activation of the timing device and the closure of the exposure switch of the digital still camera.
This International Standard does not address the measurement of auto focus accuracy and speed at low light conditions.
For digital still cameras that continuously shoot images into the buffer, the exposure button only acts as a selector of an image that was taken before the exposure button was pressed. The methods to measure shutter time lag and shooting time lag do not address this case and cannot be used for this type of digital still camera.
|
Withdrawn |
2015-03 |
Edition : 2 |
Number of pages : 25 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 15781:2019 |
Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time lag |
This document specifies how to measure and report the shooting time lag, shutter release time lag, shooting rate and start-up time lag for digital still cameras, including camera modules in phones and tablet computers. It includes a method that uses control signals inside the digital still camera and a method that determines the timing values without requiring access to the inside of the digital still camera.
This document does not address the measurement either of auto focus speed below recommended illumination level or auto focus accuracy.
|
Published |
2019-06 |
Edition : 3 |
Number of pages : 36 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 17321-1:2006 |
Graphic technology and photography — Colour characterisation of digital still cameras (DSCs) — Part 1: Stimuli, metrology and test procedures |
ISO 17321-1:2006 specifies colour stimuli, metrology, and test procedures for the colour characterization of a digital still camera (DSC) to be used for photography and graphic technology. Two methods are provided, one using narrow spectral band illumination and the other using a spectrally and colorimetrically calibrated target. Except for a specific set of permitted data operations, these DSC data are raw.
ISO 17321-1:2006 does not specify the methods for deriving transformations from raw DSC data in order to estimate scene colorimetry.
|
Withdrawn |
2006-12 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 17321-1:2012 |
Graphic technology and photography — Colour characterisation of digital still cameras (DSCs) — Part 1: Stimuli, metrology and test procedures |
ISO 17321-1:2012 specifies colour stimuli, metrology, and test procedures for the colour characterization of a digital still camera (DSC) to be used for photography and graphic technology. Two methods are provided, one using narrow spectral band illumination and the other using a spectrally and colorimetrically calibrated target. Except for a specific set of permitted data operations, these DSC data are raw.
|
Published |
2012-11 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TR 17321-2:2012 |
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 2: Considerations for determining scene analysis transforms |
ISO/TR 17321-2:2012 provides information about methods for determining scene analysis transforms based on the minimization of errors in estimated scene or focal-plane colourimetry, including corresponding colourimetry. These transforms are limited in applicability to raw DSC image data.
ISO/TR 17321-2:2012 concerns only the creation and encoding of scene-referred and focal-plane-referred image data.
|
Published |
2012-10 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TR 17321-3:2017 |
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 3: User controls and readouts for scene-referred imaging applications |
ISO/TR 17321-3:2017 provides guidelines for user controls and readouts employed in scene-referred capture processing modes implemented in digital cameras and camera raw processing software.
|
Published |
2017-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TS 17321-4:2016 |
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 4: Programmable light emission system |
ISO/TS 17321-4:2016 specifies requirements for a programmable light emission system to produce various spectral radiance distributions intended for DSC colour characterization applications.
NOTE 1 Evaluation metrics are described in this part of ISO 17321. These evaluations metrics are intended to provide "Figure of Merit (goodness)" relating to the ability of the device to produce arbitrary spectral power distributions.
NOTE 2 This part of ISO 17321 applies to a programmable light emission system composed of LEDs. However, it can be applied to light emitting devices such as quantum dots, organic LEDs, laser diodes and so forth.
NOTE 3 If spiky spectral reproduction is required, devices which have more spiky spectral light emission are intended to be used.
|
Withdrawn |
2016-06 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TS 17321-4:2022 |
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 4: Programmable light emission system |
This document describes a programmable light emission system to produce various spectral radiance distributions, intended for DSC colour characterization applications.
|
Published |
2022-11 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TR 17321-5:2021 |
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 5: Colour targets including saturated colours for colour characteristic evaluation test for colorimetric image capture |
This document describes sample methods to generate spectra for colour targets comprised of highly saturated colours for colour characteristic evaluation of colorimetric image capture capability of digital still cameras (DSCs).
|
Published |
2021-01 |
Edition : 1 |
Number of pages : 35 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 6196-3:1997 |
Micrographics — Vocabulary — Part 3: Film processing |
|
Published |
1997-08 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
37.080
Document imaging applications
;
01.040.37
Image technology (Vocabularies)
|
| ISO 18383:2015 |
Photography — Digital cameras — Specification guideline |
ISO 18383:2015 identifies a set of features that describes digital still cameras (DSCs), and it specifies their definitions, measurement methods, and presentation methods. This International Standard applies to DSCs designed and produced for and promoted to general consumers and need not be applied to those DSCs designed and produced to meet individual and special specifications agreed upon by particular business or industrial users and the manufacturer.
The presentation methods specified in it are intended for use as notations on camera bodies, on product packaging, on promotional materials for advertising and at the point of purchase, in electronic or printed catalogues and other materials, and in the relevant software.
|
Published |
2015-09 |
Edition : 1 |
Number of pages : 61 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 18844:2017 |
Photography — Digital cameras — Image flare measurement |
ISO 18844:2017 specifies the definition of image flare for digital cameras, test patterns, measurement conditions, and methods, so as to enable the comparison of the results of measurement.
The methods of measurement are designed to enable the assessment of the performance of digital cameras by using image data output by the digital cameras.
ISO 18844:2017 does not specify the aim values or the allowable range of value for the image flare.
|
Published |
2017-05 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 19084:2015 |
Photography — Digital cameras — Chromatic displacement measurements |
ISO 19084:2015 specifies the definition of chromatic displacement for digital still cameras, test patterns, measurement conditions and methods, so as to enable the comparison of the results of measurement.
The methods of measurement are designed to enable the assessment of the performance of digital still cameras by using image data output by the digital still cameras.
ISO 19084:2015 does not specify the allowable amount of chromatic displacement.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 19093:2018 |
Photography — Digital cameras — Measuring low-light performance |
This document specifies a protocol to measure the low-light performance of a camera. It is applicable to the measurement of digital cameras including camera phones and other mobile devices.
The performance aspects defined in this document are intended to all be tested. Picking one or some of them by the tester is out of scope of the usage of this document.
|
Published |
2018-09 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 19093:2018/Amd 1:2020 |
Photography — Digital cameras — Measuring low-light performance — Amendment 1: Chroma decrease calculation |
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TR 19247:2016 |
Photography — Guidelines for reliable testing of digital still cameras |
ISO/TR 19247:2016 is applied to the reliable testing of digital cameras (DSCs).
|
Published |
2016-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TS 19567-1:2016 |
Photography — Digital cameras — Texture reproduction measurements — Part 1: Frequency characteristics measurements using cyclic pattern |
ISO/TS 19567-1:2016 specifies a protocol to measure the texture reproduction in the images captured and processed by digital cameras including cameras in other devices, e.g. in camera phones.
ISO/TS 19567-1:2016 specifies protocols for the measurement of the texture reproduction using test charts with cyclic pattern.
ISO/TS 19567-1:2016 excludes the acceptable range of value for texture reproduction.
|
Published |
2016-04 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TS 19567-2:2019 |
Photography — Digital cameras — Part 2: Texture analysis using stochastic pattern |
This document specifies a protocol to measure the texture reproduction in images captured and processed by digital cameras including cameras in other devices e.g. in camera phones.
This document specifies protocols for the measurement of texture reproduction using test charts with stochastic pattern.
NOTE The measurement method specified in this document is for objective evaluations of texture reproduction, of which the results are sometimes inconsistent with subjective evaluations (See Annex C).
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TS 20328:2016 |
Imaging materials — Lenticular lens sheet — Measurements and specifications of dimensions |
ISO/TS 20328:2016 specifies the measurements and specifications of the dimensions of a lenticular lens sheet. It describes measurement methods and specifies the nominal sizes and target dimensions with tolerance. It also describes methods to test the stability of dimensions of the lenticular lens sheet.
ISO/TS 20328:2016 is applicable to lenticular lens sheets used in lenticular prints, including those that give an image the illusion of depth or make images appear to change/move as the image is viewed from different angles. Both impact and non-impact printing can be used to generate the images. Examples of the former are off-set, gravure and flexography, while the examples of the latter are silver halide, inkjet, dye diffusion thermal transfer and electrophotography.
|
Published |
2016-04 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO/TS 20793:2019 |
Photography — Lenticular print for changing images — Measurements of image quality |
This document specifies the measurement methods and specification of image quality of lenticular prints that are used for changing images. This document does not cover lenticular prints that are used for 3D images.
NOTE Lenticular prints for 3D images can be measured with the same types of procedures. However, it needs more information, such as the dependence of the measurement distance, to evaluate the 3D performance.
This document specifically describes measurement methods for cross-talk, viewing angle range, angular misalignment from the designed viewing angle and the uniformity of the image within the printing area of the lenticular print images. These are critical for the image quality of lenticular prints for changing images.
This document is applicable to lenticular prints produced by printing technologies that include impact and non-impact printing. Examples of the former are off-set, gravure and flexography, while the examples of the latter are silver halide, inkjet, dye diffusion thermal transfer and electrophotography. The multiple laser images (MLI) and changeable laser images (CLI) process of using a laser to write through a lenticular screen at different angles to create multiple images is also used.
|
Published |
2019-04 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 20954-1:2019 |
Digital cameras — Measurement method for image stabilization performance — Part 1: Optical systems |
This document defines the measurement method of optical image stabilization performance for still images compensating for handheld blur consisting of two rotational components, yaw and pitch.
It applies to consumer digital cameras with optical image stabilization for still images. Apparatuses such as camcorders and mobile phones with still image shooting functionality are within the scope of this document.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 21550:2004 |
Photography — Electronic scanners for photographic images — Dynamic range measurements |
ISO 21550:2004 specifies methods for measuring and reporting the dynamic range of electronic scanners for continuous tone photographic media. It applies to scanners for reflective and to scanners for transmissive media.
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 2969:1977 |
Cinematography — Electro-acoustic response of motion-picture control rooms and indoor theatres — Specifications and measurements |
|
Withdrawn |
1977-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.060.99
Other standards related to cinematography
;
97.200.10
Theatre, stage and studio equipment
|
| ISO 17121:2000 |
Cinematography — Work stations used for film and video production — Requirements for visual and audio conditions |
|
Withdrawn |
2000-10 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
37.060.99
Other standards related to cinematography
;
97.200.10
Theatre, stage and studio equipment
|
| ISO 17121:2000/Cor 1:2001 |
Cinematography — Work stations used for film and video production — Requirements for visual and audio conditions — Technical Corrigendum 1 |
|
Withdrawn |
2001-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.060.99
Other standards related to cinematography
;
97.200.10
Theatre, stage and studio equipment
|
| ISO 4246:1984 |
Cinematography — Vocabulary |
|
Withdrawn |
1984-02 |
Edition : 1 |
Number of pages : 80 |
Technical Committee |
37.060
Cinematography
;
01.040.37
Image technology (Vocabularies)
|
| ISO 2969:1977 |
Cinematography — Electro-acoustic response of motion-picture control rooms and indoor theatres — Specifications and measurements |
|
Withdrawn |
1977-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.060.99
Other standards related to cinematography
;
97.200.10
Theatre, stage and studio equipment
|
| ISO 17121:2000 |
Cinematography — Work stations used for film and video production — Requirements for visual and audio conditions |
|
Withdrawn |
2000-10 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
37.060.99
Other standards related to cinematography
;
97.200.10
Theatre, stage and studio equipment
|
| ISO 17121:2000/Cor 1:2001 |
Cinematography — Work stations used for film and video production — Requirements for visual and audio conditions — Technical Corrigendum 1 |
|
Withdrawn |
2001-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.060.99
Other standards related to cinematography
;
97.200.10
Theatre, stage and studio equipment
|
| ISO/R 169:1960 |
Sizes of photocopies (on paper) readable without optical devices |
|
Withdrawn |
1960-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.080
Document imaging applications
;
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 446:1991 |
Micrographics — ISO character and ISO test chart No. 1 — Description and use |
Applies to the quality testing of microimages produced with a given micrographic system and allows to determine the potential legibility of documents recorded with that system. Annex A gives optional features for ISO test chart No. 1. This second edition cancels and replaces the first editions (ISO 435:1975 and ISO 446:1975), which have been merged into a single International Standard.
|
Withdrawn |
1991-02 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.080
Document imaging applications
|
| ISO 446:2004 |
Micrographics — ISO character and ISO test chart No. 1 — Description and use |
ISO 446:2004 specifies the characteristics of the black and white ISO character and of the ISO test chart No. 1, as well as their use.
It applies to the quality control of the microimages produced with a given micrographic system and the assessment of the potential legibility of the documents recorded using that system.
|
Published |
2004-03 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
37.080
Document imaging applications
|
| ISO 689:1975 |
Withdrawal of ISO 689-1975 |
|
Withdrawn |
1975-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.080
Document imaging applications
|
| ISO 782:1975 |
Withdrawal of ISO 782-1975 |
|
Withdrawn |
1975-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.080
Document imaging applications
|