| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4302:1981 |
Cranes — Wind load assessment |
Gives a simplified method of calculation and assumes that the wind blows horizontal from any direction, that the wind blows at a constant velocity and that there is a static reaction to the loadings applying to the crane structure. Includes built-in allowances for the effects of gusting (rapid changes in wind velocity) and for dynamic response.
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.020.20
Cranes
|
| ISO 4302:2016 |
Cranes — Wind load assessment |
ISO 4302:2016 specifies the assessment of wind loads on cranes.
It establishes general methods for calculating wind loads (for in-service and out-of-service conditions), which are included in the load combinations stated in ISO 8686-1 and used for proofs of competence such as those given in ISO 20332 for the structural components of cranes.
It provides a simplified method of calculation and assumes that
- the wind may blow horizontally from any direction,
- the wind blows at a constant speed,
- there is a static reaction to the wind load applied to the crane structure.
It includes built-in allowances for the effects of gusting (fluctuation in wind speed) and for dynamic response.
It gives guidance on when to secure the crane for out-of-service conditions.
|
Published |
2016-10 |
Edition : 2 |
Number of pages : 22 |
Technical Committee |
53.020.20
Cranes
|
| ISO 4304:1987 |
Cranes other than mobile and floating cranes — General requirements for stability |
Specifies the conditions to be met when verifying, by calculation, the stability of all crane types defined in ISO 4306-1 that are subject to tilting. It assumes that they are standing on a firm, level supporting surface or track. The sliding of cranes on their tracks is not covered.
|
Published |
1987-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 4305:1981 |
Mobile cranes — Determination of stability |
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 4305:1991 |
Mobile cranes — Determination of stability |
|
Withdrawn |
1991-05 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
53.020.20
Cranes
|
| ISO 4305:2014 |
Mobile cranes — Determination of stability |
ISO 4305:2014 specifies the conditions to be taken into consideration when verifying the stability of a mobile crane by calculation, assuming that the crane is operating on a firm and level surface (up to 1 % gradient).
It applies to mobile cranes as defined in ISO 4306-2, i.e. appliances mounted on wheels (tires) or crawlers, with or without outriggers with the exception of loader cranes.
|
Published |
2014-04 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
53.020.20
Cranes
|
| ISO 4306-2:1994 |
Cranes — Vocabulary — Part 2: Mobile cranes |
Establishes a vocabulary in English, French and Russian of the most commonly used terms in the field of cranes, lifting appliances and related equipment. Defines the terms relating to the basic types of self-powered mobile cranes. Excavators and other construction machines as described in ISO 6165 are excluded.
|
Withdrawn |
1994-10 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-2:2012 |
Cranes — Vocabulary — Part 2: Mobile cranes |
ISO 4306-2:2012 establishes a vocabulary of terms and definitions relating to the basic types of self-powered mobile cranes.
|
Published |
2012-09 |
Edition : 4 |
Number of pages : 13 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-3:1983 |
Lifting appliances — Vocabulary — Part 3: General concepts |
|
Withdrawn |
1983-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-3:1991 |
Cranes — Vocabulary — Part 3: Tower cranes |
Establishes a vocabulary in English, French and Russian of the most commonly used terms in the field of cranes. This part gives the general definition of a tower crane. It applies to tower cranes for construction work that can be assembled and dismantled, permanently erected tower cranes, hammerhead cranes, dockside and shipbuilders'tower cranes. It does not apply to mobile boom cranes which may be fitted with a tower attachment and erection masts, with or without jibs.
|
Withdrawn |
1991-02 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-3:2003 |
Cranes — Vocabulary — Part 3: Tower cranes |
ISO 4306 establishes definitions in English, French and Russian for the most commonly used terms in the field of cranes.
ISO 4306-3:2002 gives the general definition of a tower crane and illustrates the terminology used with each type of tower crane by the use of figures with referenced term numbers.
It is applicable to
tower cranes that can be assembled and dismantled; permanently erected tower cranes;
It is not applicable to
mobile boom cranes which may be fitted with a tower attachment; erection masts, with or without jibs.
|
Withdrawn |
2003-12 |
Edition : 3 |
Number of pages : 18 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-3:2003/Amd 1:2011 |
Cranes — Vocabulary — Part 3: Tower cranes — Amendment 1 |
|
Withdrawn |
2011-12 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-3:2016 |
Cranes — Vocabulary — Part 3: Tower cranes |
ISO 4306-3:2016 as a whole establishes a vocabulary of the most commonly used terms in the field of cranes.
This part of ISO 4306 gives the general definition of a tower crane and illustrates the terminology used with each type of tower crane by the use of figures with referenced term numbers.
It is applicable to
- tower cranes that can be assembled and dismantled (by element or self-erecting cranes),
- permanently erected tower cranes, and
- mobile self-erecting tower cranes.
It is not applicable to
- mobile cranes, or
- erection masts, with or without jibs.
|
Published |
2016-10 |
Edition : 4 |
Number of pages : 14 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-4:1983 |
Lifting appliances — Vocabulary — Part 4: Component parts |
|
Withdrawn |
1983-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-4:2020 |
Cranes — Vocabulary — Part 4: Jib cranes |
The ISO 4306 series establishes a vocabulary of the most commonly used terms in the field of cranes.
This document defines the terms related to jib type cranes.
Mobile cranes, tower cranes, railway cranes, and offshore cranes are excluded.
Annex A contains a diagram showing the different types of jib cranes.
|
Published |
2020-10 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4306-5:2005 |
Cranes — Vocabulary — Part 5: Bridge and gantry cranes |
ISO 4306-5:2005 establishes a vocabulary of the most commonly used terms relating to bridge and gantry cranes.
|
Published |
2005-08 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4308:1981 |
Cranes — Selection of wire ropes |
|
Withdrawn |
1981-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.020.20
Cranes
|
| ISO 4310:1981 |
Cranes — Test code and procedures |
Specifies the tests and procedures to be followed in order to verify that a crane conforms to its operational specifications and is capable of lifting rated loads. Where rated loads are determined by stability, a test procedure and test load are specified that permit stability margins to be easily verified. Defines test procedures such as conformity tests, visual inspection and load lifting competence testing.
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 4310:2009 |
Cranes — Test code and procedures |
ISO 4310:2009 specifies tests, inspections and procedures for verifying the conformance of a crane with its operational specifications and capability to lift rated loads (see ISO 7363). ISO 4310:2009 is applicable to the types of cranes designated in ISO 4306-1, prior to first use following manufacture or after modification or repair of the load‑bearing structure or a component of an individual crane.
Where rated loads are governed by stability, a test procedure and test load are specified that permit stability margins to be easily verified.
|
Published |
2009-06 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7296-1:1991 |
Cranes — Graphic symbols — Part 1: General |
Gives 67 symbols and defines the various colours to be used. Contains the alphabetical indexes in English, French and Russian.
|
Published |
1991-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
53.020.20
Cranes
|
| ISO 7296-1:1991/Amd 1:1996 |
Cranes — Graphic symbols — Part 1: General — Amendment 1 |
Deletes some graphic symboles, which have been introduced into ISO 7296-2.
|
Published |
1996-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
53.020.20
Cranes
|
| ISO 7296-2:1996 |
Cranes — Graphical symbols — Part 2: Mobile cranes |
Contains graphical symbols for use on operator controls and other displays on mobile cranes as defined in ISO 4306-2.
|
Withdrawn |
1996-12 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
53.020.20
Cranes
|
| ISO 7296-2:2020 |
Cranes — Graphical symbols — Part 2: Mobile cranes |
This document establishes graphical symbols for use on operator controls and other displays on mobile cranes as defined in ISO 4306‑2.
|
Published |
2020-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
53.020.20
Cranes
|
| ISO 7296-3:2006 |
Cranes — Graphical symbols — Part 3: Tower cranes |
ISO 7296-3:2006 establishes graphical symbols for use on operator controls and other displays on tower cranes as defined in ISO 4306-3.
|
Published |
2006-10 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
53.020.20
Cranes
|
| ISO 7752-2:1985 |
Lifting appliances — Controls — Layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes |
Establishes a consistent arrangement and movement for the basic controls used during the crane-operation cycle for slewing, load hoisting and lowering, jib luffing and telescoping. Defines the requirements, and direction of movement of these controls. Deals with bi-directional controls. Cross-shift levers (multi-directional) are under consideration.
|
Withdrawn |
1985-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7752-2:1985/Add 1:1986 |
Lifting appliances — Controls — Layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes — Addendum 1 |
|
Withdrawn |
1986-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7752-2:2011 |
Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes |
ISO 7752-2:2011 establishes the arrangement, requirements and direction of movement of the basic controls for slewing, load hoisting and lowering, and boom luffing and telescoping, on mobile cranes as defined in ISO 4306-2. It deals with bi-directional controls and the basic arrangement and requirements for cross-shift levers (multi-directional controls). It is intended to be used in conjunction with ISO 7752-1.
|
Published |
2011-11 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7752-3:1993 |
Cranes — Controls — Layout and characteristics — Part 3: Tower cranes |
Specifies the particular requirements for controls for tower cranes as defined in ISO 4306-1 and ISO 4306-3 and the arrangement of basic controls used for positioning loads. Applies to the controls of tower cranes for building and general construction work that can be dismantled, permanently erected tower cranes, hammerhead cranes, dockside and shipbuilders' tower cranes. Does not apply to the controls of power-driven mobile jib cranes which may be fitted with a tower attachment and erection masts, with or without jibs.
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7752-3:2010 |
Cranes — Control layout and characteristics — Part 3: Tower cranes |
ISO 7752-3:2010 specifies the particular requirements for the controls of tower cranes as defined in ISO 4306-3 and the arrangement of those basic controls used for positioning loads. It is intended to be used in conjunction with ISO 7752-1, which gives general principles and requirements for the controls of all types of cranes.
|
Withdrawn |
2010-06 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7752-3:2013 |
Cranes — Control layout and characteristics — Part 3: Tower cranes |
ISO 7752 specifies the particular requirements for controls for tower cranes as defined in ISO 4306‑3 and the arrangement of basic control used for positioning loads.
|
Published |
2013-12 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7752-4:1989 |
Cranes — Controls — Layout and characteristics — Part 4: Jib cranes |
Establishes the arrangement, requirements and direction of movement of the basic controls for travelling, slewing, lifting, hoisting and lowering operations. Refers to ISO 4306-1 and ISO 7752-1.
|
Published |
1989-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7752-5:1985 |
Lifting appliances — Controls — Layout and characteristics — Part 5: Overhead travelling cranes and portal bridge cranes |
Establishes the arrangement, requirements and direction of movement of the basic controls for travelling, traversing, slewing, cab driving, lifting, hoisting and lowering operations for these cranes as defined in ISO 4306-1.
|
Withdrawn |
1985-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 7752-5:2021 |
Cranes — Control layout and characteristics — Part 5: Bridge and gantry cranes |
This document establishes the arrangement, requirements and direction of movement of the basic controls for travelling, traversing, slewing, cab movement and load hoisting and lowering operations for all cab-operated, overhead travelling cranes and portal bridge cranes, as defined in ISO 4306-1 and ISO 4306-5.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8087:1985 |
Mobile cranes — Drum and sheave sizes |
Establishes the minimum ratio of the pitch diameters of the drum and sheave to the nominal diameter of the rope for hoisting and luffing operations. Applies to all basic types of self-propelled mobile cranes as defined in ISO 4306-1.
|
Withdrawn |
1985-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8306:1985 |
Cranes — Overhead travelling cranes and portal bridge cranes — Tolerances for cranes and tracks |
Specifies the manufacturing tolerances at standard temperature of 20 °C. These tolerances apply to a lifting appliance loaded solely by ist own mass. Tolerances take no account of elastic deformation during operation.
|
Withdrawn |
1985-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8566-1:1992 |
Cranes — Cabins — Part 1: General |
Establishes the general requirements for cabin construction, driver's seat, visibility, control elements, information, noise, vibration, heating and air-conditioning for cranes as defined in ISO 4306-1.
|
Withdrawn |
1992-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8566-1:2010 |
Cranes — Cabins and control stations — Part 1: General |
ISO 8566-1:2010 specifies the general requirements for cabins and control stations from which cranes are operated, and takes the conditions of use of the cabin into consideration.
|
Published |
2010-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8566-2:1995 |
Cranes — Cabins — Part 2: Mobile cranes |
Establishes the criteria for cabins for mobile cranes as defined in ISO 4306-2. These criteria are intended to cover cabins only for crane operation and not for road travel.
|
Withdrawn |
1995-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8566-2:2016 |
Cranes — Cabins and control stations — Part 2: Mobile cranes |
ISO 8566-2:2016 establishes the criteria for cabins for mobile cranes as defined in ISO 4306‑2. These criteria are intended to cover cabins only for crane operation and not for road travel.
The general criteria for cabins on mobile cranes are presented in ISO 8566‑1.
|
Published |
2016-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8566-3:1992 |
Cranes — Cabins — Part 3: Tower cranes |
Establishes the requirements for cabin construction, control station, control elements and noise for cranes as defined in ISO 4306-3.
|
Withdrawn |
1992-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8566-3:2010 |
Cranes — Cabins and control stations — Part 3: Tower cranes |
ISO 8566-3:2010 specifies the requirements for cabins and control stations for tower cranes.
|
Published |
2010-02 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8566-5:1992 |
Cranes — Cabins — Part 5: Overhead travelling and portal bridge cranes |
Establishes the requirements for cabin construction, driver's seat, control elements, heating and cooling for cranes as defined in ISO 4306-1.
|
Withdrawn |
1992-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8566-5:2017 |
Cranes — Cabins and control stations — Part 5: Overhead travelling and portal bridge cranes |
ISO 8566-5:2017 establishes the requirements for cabins and control stations for overhead travelling and portal bridge cranes as defined in ISO 4306‑1.
ISO 8566-5:2017 takes the conditions of use of the cabin into consideration.
|
Published |
2017-05 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-1:1989 |
Cranes — Design principles for loads and load combinations — Part 1: General |
Establishes general methods for calculating loads and principles to be used to select load combinations for proof of competence for the structural and mechanical components for cranes as defined in ISO 4306-1. Is based on rigid-body kinetic analysis and elasto-static analysis. Provides the general form, content and range of parameter values for more specific standards and also a framework for agreement on loads and load combinations between manufacturer and purchaser.
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-1:2012 |
Cranes — Design principles for loads and load combinations — Part 1: General |
ISO 8686-1:2012 establishes general methods for the calculating loads and principles to be used in the selection of load combinations for proofs of competence in accordance with ISO 20332 for the structural and mechanical components of cranes as defined in ISO 4306-1.
It is based on rigid-body kinetic analysis and elastostatic analysis but expressly permits the use of more advanced methods (calculations or tests) to evaluate the effects of loads and load combinations, and the values of dynamic load factors, where it can be demonstrated that these provide at least equivalent levels of competence.
ISO 8686-1:2012 provides for two distinct kinds of application: the general form, content and ranges of parameter values for more specific standards to be developed for individual crane types; a framework for agreement on loads and load combinations between a designer or manufacturer and a crane purchaser for those types of cranes where specific standards do not exist.
|
Published |
2012-12 |
Edition : 2 |
Number of pages : 49 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-2:2004 |
Cranes — Design principles for loads and load combinations — Part 2: Mobile cranes |
ISO 8686-2:2004 applies the principles set forth in ISO 8686-1 to mobile cranes, as defined in ISO 4306-2, and presents loads and load combinations appropriate for use in proof-of-competence calculations for the steel structures of mobile cranes.
ISO 8686-2:2004 is applicable to mobile cranes used for normal service and to mobile cranes used for duty cycle service.
NOTE Means for proof-of-competence testing will be addressed in another document.
|
Withdrawn |
2004-08 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-2:2018 |
Cranes — Design principles for loads and load combinations — Part 2: Mobile cranes |
This document applies the principles set forth in ISO 8686‑1 to mobile cranes, as defined in ISO 4306‑2, and presents loads and load combinations appropriate for use in proof-of-competence calculations for the steel structures of mobile cranes.
This document is applicable to mobile cranes used for normal and duty cycle service.
NOTE Means for proof-of-competence testing will be addressed in another document.
|
Published |
2018-06 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-3:1998 |
Cranes — Design principles for loads and load combinations — Part 3: Tower cranes |
|
Withdrawn |
1998-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-3:2018 |
Cranes — Design principles for loads and load combinations — Part 3: Tower cranes |
This document establishes the application of ISO 8686-1 to tower cranes for construction work as defined in ISO 4306-3, and gives specific requirements and values for factors to be used at the structural calculation.
Tower cranes for construction work are exclusively equipped with a hook as the load-handling device.
For tower cranes intended to be used for other purposes and/or with other load-handling devices, other values can be necessary according to the tower crane usage specification.
|
Published |
2018-09 |
Edition : 2 |
Number of pages : 23 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-4:2005 |
Cranes — Design principles for loads and load combinations — Part 4: Jib cranes |
ISO 8686-4:2005 applies the general design principles set forth in ISO 8686-1 to jib cranes, i.e. jib-type cranes other than those offshore, tower, mobile, railway, gantry and overhead cranes covered in other parts of ISO 8686-1, as defined in ISO 4306-1, and presents loads and load combinations appropriate for use in proof-of-competence calculations for the steel structures of jib cranes.
|
Published |
2005-01 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-5:1992 |
Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes |
Establishes the application of ISO 8686-1 to overhead travelling and portal bridge cranes as defined in ISO 4306-1, and gives specific values for the factors to be used.
|
Withdrawn |
1992-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 8686-5:2017 |
Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes |
ISO 8686-5:2017 establishes the application of ISO 8686‑1 to overhead travelling and portal bridge cranes as defined in ISO 4306‑1 and gives specific values for the factors to be used.
|
Published |
2017-05 |
Edition : 2 |
Number of pages : 28 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9373:1989 |
Cranes and related equipment — Accuracy requirements for measuring parameters during testing |
Specifies the principal requirements for instruments and measurement systems of test loads, distances, time and other relevant parameters. Gives recommended limit values of relative errors in measurement during testing.
|
Withdrawn |
1989-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9374-1:1989 |
Cranes — Information to be provided — Part 1: General |
Specifies generally the information to be provided by the purchaser and the manufacturer so that the most suitable crane can be supplied for the duty requirements and service conditions. Refers to ISO 4301-1 und ISO 7363.
|
Published |
1989-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9374-3:2002 |
Cranes — Information to be provided for enquiries, orders, offers and supply — Part 3: Tower cranes |
ISO 9374-3:2002 specifies information to be provided
by the purchaser when enquiring for a tower crane,by the purchaser when ordering a tower crane,by a manufacturer when offering (tendering) for a tower crane,by the manufacturer when supplying a tower crane.
|
Withdrawn |
2002-08 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9374-3:2014 |
Cranes — Information to be provided for enquiries, orders, offers and supply — Part 3: Tower cranes |
ISO 9374-3:2014 gives guidance for information to be provided: a) by the purchaser when enquiring for a tower crane, b) by the purchaser when ordering a tower crane, c) by a manufacturer when offering (tendering) for a tower crane, d) by the manufacturer when supplying a tower crane.
|
Withdrawn |
2014-04 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9374-4:1989 |
Cranes — Information to be provided — Part 4: Jib cranes |
Specifies information to be provided by a purchaser in enquiring for or ordering a jib crane and by a manufacturer in tendering for or supplying this crane. Annex A gives a format for information to be provided by the purchaser.
|
Published |
1989-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.020.20
Cranes
|
| ISO/DIS 9374-4 |
Cranes — Information to be provided — Part 4: Jib cranes |
Specifies information to be provided by a purchaser in enquiring for or ordering a jib crane and by a manufacturer in tendering for or supplying this crane. Annex A gives a format for information to be provided by the purchaser.
|
Under development |
|
Edition : 2 |
Number of pages : 17 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9374-5:1991 |
Cranes — Information to be provided — Part 5: Overhead travelling cranes and portal bridge cranes |
Specifies information to be provided by: a purchaser in enquiring about or ordering a crane, a manufacturer in tendering for or supplying a crane. Annex A forms an integral part of this standard.
|
Withdrawn |
1991-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9374-5:2021 |
Cranes — Information to be provided — Part 5: Overhead travelling cranes and portal bridge cranes |
This document specifies information to be provided by:
a) a purchaser in enquiring about or ordering an overhead travelling crane or portal bridge crane;
b) a manufacturer in tendering for or supplying an overhead travelling crane or portal bridge crane.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9926-1:1990 |
Cranes — Training of drivers — Part 1: General |
Specifies the minimum training to be given to trainee drivers of cranes, to develop basic operational skills and to impart the requisite knowledge for the proper use of those skills. Does not specify any procedure for evaluating capabilities or qualifications of the trainees.
|
Published |
1990-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
03.100.30
Management of human resources
;
53.020.20
Cranes
|
| ISO 9926-3:2005 |
Cranes — Training of drivers — Part 3: Tower cranes |
ISO 9926-3:2005 covers the specific subjects considered necessary for training tower crane drivers.
|
Withdrawn |
2005-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
03.100.30
Management of human resources
;
53.020.20
Cranes
|
| ISO 9926-3:2016 |
Cranes — Training of operators — Part 3: Tower cranes |
ISO 9926-3:2016 covers the specific subjects considered necessary for training tower crane operators.
|
Published |
2016-02 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
03.100.30
Management of human resources
;
53.020.20
Cranes
|
| ISO 9927-1:1994 |
Cranes — Inspections — Part 1: General |
Specifies the regular inspections to be carried out on cranes as defined in ISO 4306-1, ISO 4306-2 and ISO 4306-3.
|
Withdrawn |
1994-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9927-1:2009 |
Cranes — Inspections — Part 1: General |
ISO 9927-1:2009 specifies the inspections to be carried out on cranes as defined in ISO 4306-1. It does not cover the inspections carried out prior to the first use of the crane.
|
Withdrawn |
2009-01 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9927-1:2013 |
Cranes — Inspections — Part 1: General |
ISO 9927:2013 specifies the general requirements for inspections to be carried out on cranes as defined in ISO 4306‑1. Additional requirements for particular types of cranes are intended to be covered by the relevant specific parts of ISO 9927.
|
Published |
2013-06 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9927-3:2005 |
Cranes — Inspections — Part 3: Tower cranes |
ISO 9927-3:2005 specifies the regular inspections to be carried out on tower cranes. It is intended to be used in conjunction with ISO 9927-1. It does not cover inspection prior to the first use of a tower crane.
|
Withdrawn |
2005-07 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9927-3:2019 |
Cranes — Inspections — Part 3: Tower cranes |
This document specifies the regular inspections to be carried out on tower cranes.
It does not cover inspection prior to the first use of a tower crane.
|
Published |
2019-02 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9927-5:2017 |
Cranes — Inspections — Part 5: Bridge and gantry cranes, including portal and semi-portal cranes and their supporting structures |
ISO 9927-5:2017 specifies the inspections to be carried out on bridge and gantry cranes. It is intended to be used in conjunction with ISO 9927‑1.
It does not cover inspection prior to the first use of a bridge or gantry crane.
|
Published |
2017-09 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9928-1:1990 |
Cranes — Crane driving manual — Part 1: General |
Gives guidance on the contents and the presentation of a crane driving manual which include: technical data, special safety advice, driver's aids and controls, driver's instructions, load diagrams and load tables, safety devices, environmental conditions.
|
Withdrawn |
1990-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9928-1:2015 |
Cranes — Crane operating manual — Part 1: General |
ISO 9928-1:2015 specifies general requirements for the contents of a crane operating manual.
|
Published |
2015-06 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9928-2:2007 |
Cranes — Crane driving manual — Part 2: Mobile crane operators |
ISO 9928-2:2007 specifies the contents of a crane driving manual for the operators of mobile cranes as defined in ISO 4306-2.
|
Withdrawn |
2007-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9928-2:2014 |
Cranes — Crane operating manual — Part 2: Mobile cranes |
ISO 9928-2:2014 specifies the contents of a manual for the operators of mobile cranes as defined in ISO 4306 2.
|
Published |
2014-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9942-1:1994 |
Cranes — Information labels — Part 1: General |
Specifies the minimum requirements for labels for the identification and the operation of cranes.
|
Withdrawn |
1994-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9942-1:2015 |
Cranes — Information labels — Part 1: General |
ISO 9942-1:2015 specifies the minimum requirements for labels for the identification (marking) and the operation of cranes.
|
Published |
2015-05 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9942-3:1999 |
Cranes — Information labels — Part 3: Tower cranes |
|
Withdrawn |
1999-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.020.20
Cranes
|
| ISO 9942-3:2020 |
Cranes — Information labels — Part 3: Tower cranes |
This document specifies the minimum requirements for labels for the identification (marking) and the operation of tower cranes.
|
Published |
2020-02 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
53.020.20
Cranes
|
| ISO 2860:1992 |
Earth-moving machinery — Minimum access dimensions |
Specifies the minimum dimensions for: hand, head, body, arm and two-handed access on equipment and machinery as defined in ISO 6165.
|
Published |
1992-02 |
Edition : 4 |
Number of pages : 4 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 10245-1:1994 |
Cranes — Limiting and indicating devices — Part 1: General |
Specifies general requirements for limiting and indicating devices for lifting appliances that are applicable to loads and motions, performance and environment. These devices restrict operation and/or provide the driver or other persons with operational information.
|
Withdrawn |
1994-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-1:2008 |
Cranes — Limiting and indicating devices — Part 1: General |
ISO 10245-1:2008 specifies general requirements for limiting and indicating devices for cranes that are applicable to loads and motions, performance and environment. These devices restrict operation and/or provide the operator or other persons with operational information.
|
Withdrawn |
2008-01 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-1:2021 |
Cranes — Limiting and indicating devices — Part 1: General |
This document specifies general requirements for limiting and indicating devices for cranes that are applicable to loads and motions, performance and environment. These devices restrict operation and/or provide the operator or other persons with operational information.
The specific requirements for the various types of crane are given in the other parts of the ISO 10245 series.
|
Published |
2021-03 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-2:1994 |
Cranes — Limiting and indicating devices — Part 2: Mobile cranes |
Specifies the requirements for devices which limit and/or indicate the loads, motions, performance and environment of mobile cranes. The general requirements for limiting and indicating devices for cranes are given in ISO 10245-1. Applies to all mobile cranes as defined in 4306-2. Some basic machine types within this scope are convertible for use in excavating work and other applications not considered to be lifting service. The requirements given here are applicable only to such machines when used as lifting cranes.
|
Withdrawn |
1994-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-2:2014 |
Cranes — Limiting and indicating devices — Part 2: Mobile cranes |
ISO 10245-2:2014 specifies the requirements for devices which limit and/or indicate the loads, motions, performance, and environment of mobile cranes. The general requirements for limiting and indicating devices for cranes are given in ISO 10245‑1. ISO 10245-2:2014 applies to all mobile cranes as defined in ISO 4306‑2.
|
Published |
2014-02 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-2:2014/Amd 1:2015 |
Cranes — Limiting and indicating devices — Part 2: Mobile cranes — Amendment 1 |
|
Published |
2015-07 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-3:1999 |
Cranes — Limiting and indicating devices — Part 3: Tower cranes |
|
Withdrawn |
1999-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-3:2008 |
Cranes — Limiting and indicating devices — Part 3: Tower cranes |
ISO 10245-3:2008 gives requirements specific to tower cranes for limiting and indicating devices. It is applicable to tower cranes as defined in ISO 4306‑3. It is not applicable to end stops such as buffers used to stop trolleying, travelling or derricking movements, nor to erection, dismantling operations or the changing of a crane's configuration.
|
Withdrawn |
2008-01 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-3:2019 |
Cranes — Limiting and indicating devices — Part 3: Tower cranes |
This document gives requirements specific to tower cranes for limiting and indicating devices. It is applicable to tower cranes as defined in ISO 4306‑3.
It is not applicable to end stops such as buffers used to stop trolleying, travelling or luffing movements, nor to erection, dismantling operations or the changing of a crane's configuration.
NOTE General requirements for the devices are given in ISO 10245‑1.
|
Published |
2019-02 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-4:2004 |
Cranes — Limiting and indicating devices — Part 4: Jib cranes |
ISO 10245-4:2004 specifies the requirements for devices which limit and/or indicate the loads, motions, performance and environment of jib-type cranes as defined in ISO 4306-1, other than offshore, tower, mobile and railway cranes, which are covered in the other parts of ISO 10245.
|
Published |
2004-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-4:2004/Cor 1:2006 |
Cranes — Limiting and indicating devices — Part 4: Jib cranes — Technical Corrigendum 1 |
|
Published |
2006-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10245-5:1995 |
Cranes — Limiting and indicating devices — Part 5: Overhead travelling and portal bridge cranes |
Specifies the requirements for limiting and indicating devices of bridges and gantry cranes for loads, motions, performance and environment. General requirements for limiting and indicating devices for cranes are given in ISO 10245-1.
|
Published |
1995-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10571:2011 |
Tyres for mobile cranes and similar specialized machines |
ISO 10571:2011 specifies the designation, dimensions, load ratings and reference speed for tyres and rims fitted to vehicles such as all-terrain equipment, mobile cranes, crash tenders, etc. likely to operate on highway over long distances at reference speed and under constant load.
|
Withdrawn |
2011-07 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
53.020.20
Cranes
;
83.160.99
Other tyres
|
| ISO 10571:2016 |
Tyres for mobile cranes and similar specialized machines |
ISO 10571:2016 specifies the designation, dimensions, load ratings and reference speed for tyres and rims fitted to vehicles, such as all-terrain equipment, mobile cranes, crash tenders, etc., likely to operate on highway over long distances at reference speed and under constant load.
|
Published |
2016-04 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
53.020.20
Cranes
;
83.160.99
Other tyres
|
| ISO 10972-1:1998 |
Cranes — Requirements for mechanisms — Part 1: General |
|
Published |
1998-02 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10972-2:2009 |
Cranes — Requirements for mechanisms — Part 2: Mobile cranes |
ISO 10972-2:2009 establishes requirements specific to the mechanisms of mobile cranes, in addition to the general requirements for cranes given in ISO 10972-1.
These additional requirements concern the arrangement, features and characteristics of the crane mechanisms, and the minimum requirements for certain mechanism components.
Rules for the proof of competence calculation regarding different limit states (yield strength, fatigue, wear) are excluded from ISO 10972-2:2009.
|
Published |
2009-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10972-3:2003 |
Cranes — Requirements for mechanisms — Part 3: Tower cranes |
ISO 10972-3:2003 establishes requirements which apply specifically to the mechanisms and related components of tower cranes, in addition to the general requirements given in ISO 10972-1.
These additional requirements concern the arrangement, features and characteristics of the crane mechanisms, and the minimum requirements for certain mechanism components.
Rules for the proof of competence calculation regarding different limit states (yield strength, fatigue, wear) are excluded from ISO 10972-3:2003.
ISO 10972-3:2003 is not applicable to the climbing mechanisms and related components used on tower cranes, nor to the climbing frame.
|
Published |
2003-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10972-4:2007 |
Cranes — Requirements for mechanisms — Part 4: Jib cranes |
ISO 10972-4:2007 establishes the particular requirements relating to mechanisms for jib cranes as defined in ISO 4306-1.
These particular requirements concern general layout and design of mechanisms, selection and/or design requirements of components, and instructions for manufacture, mounting, installation and testing.
|
Published |
2007-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10972-5:2006 |
Cranes — Requirements for mechanisms — Part 5: Bridge and gantry cranes |
ISO 10972-5:2006 establishes the particular requirements relating to mechanisms for bridge and gantry cranes as defined in ISO 4306-1. The general requirements for mechanisms for cranes are given in ISO 10972-1.
These particular requirements concern the general layout and design of mechanisms, the selection and/or design requirements of components and the instructions for manufacturing, mounting, installation and testing.
Rules for proof of competence calculations regarding different limit states (yield strength, fatigue, wear) are excluded from ISO 10972-5:2006.
|
Published |
2006-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.020.20
Cranes
|
| ISO 10973:1995 |
Cranes — Spare parts manual |
Guidelines on the general requirements necessary for the preparation and presentation of spare parts manuals for cranes.
|
Published |
1995-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
53.020.20
Cranes
|
| ISO 11031:2016 |
Cranes — Principles for seismically resistant design |
ISO 11031:2016 establishes general methods for calculating seismic loads to be used as defined in the ISO 8686 series and for proof of competence as defined in ISO 20332, for the structure and mechanical components of cranes as defined in ISO 4306.
ISO 11031:2016 evaluates dynamic response behaviour of a crane subjected to seismic excitation as a function of the dynamic characteristics of the crane and of its supporting structure.
The evaluation takes into account dynamic effects both of regional seismic conditions and of the local conditions on the surface of the ground at the crane location.
The operational conditions of the crane and the risks resulting from seismic damage to the crane are also taken into account.
It is restricted to the serviceability limit state (SLS), maintaining stresses within the elastic range in accordance with ISO 20332.
It does not extend to proofs of competence which include plastic deformations. When these are permitted by agreement between crane supplier and customer, other standards or relevant literature taking them into account can be used.
|
Published |
2016-08 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
53.020.20
Cranes
|
| ISO 2867:1980 |
Earth-moving machinery — Access systems |
|
Withdrawn |
1980-11 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
53.100
Earth-moving machinery
|