| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/R 343:1963 |
Withdrawal of ISO/R 343-1963 |
|
Withdrawn |
1963-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO/R 344-1:1963 |
Withdrawal of ISO/R 344/1-1963 |
|
Withdrawn |
1963-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO/R 344-2:1969 |
Withdrawal of ISO/R 344/2-1969 |
|
Withdrawn |
1969-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 344:1981 |
Textile machinery and accessories — Spinning machines — Flyer bobbins |
Figure 1a shows a flyer bobbin of the type with shoulder, figure 1b gives a flyer bobbin of the type without shoulder. Table 1 contains the main dimensions and tolerances of bobbins with shoulder, table 2 those of bobbins without shoulder. - Replaces ISO Recommendations R 344/1-1963 and R 344/2-1969 and constitutes its technical revision.
|
Withdrawn |
1981-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 368:1982 |
Textile machinery and accessories — Tubes for ring-spinning, doubling and twisting spindles, taper 1 : 38 and 1 : 64 |
|
Withdrawn |
1982-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 368:1991 |
Spinning preparatory, spinning and doubling (twisting) machinery — Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 |
Specifies the dimensions (length and inner diameter) and permissible total run-out of tubes as well as the dimensions and tolerances of the gauges for checking the tubes. This third edition cancels and replaces the second edition (1982).
|
Withdrawn |
1991-11 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 476:1982 |
Textile machinery and accessories — Pirn winding machines — Vocabulary |
This International Standard establishes a list of basic terms used in designating the pirn winding machines and their accessories as well as certain corresponding defintions in the field of terminology for weaving preparatory machinery. - Replaces ISO Recommendation R 476-1966 and constitutes its technical revision.
|
Published |
1982-02 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
01.040.59
Textile and leather technology (Vocabularies)
;
59.120.20
Winding machines and equipment
|
| ISO 477:1982 |
Textile machinery and accessories — Cone and cheese winding machines — Vocabulary |
This International Standard establishes a list of basic terms used in the designation of cone and cheese winding machines and their components as well as the corresponding definitions related to the terminology of textile machinery for cross winding. - Replaces ISO Recommendation R 477-1966 and constitutes its technical revision.
|
Published |
1982-02 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
01.040.59
Textile and leather technology (Vocabularies)
;
59.120.20
Winding machines and equipment
|
| ISO/R 480:1966 |
Withdrawal of ISO/R 480-1966 |
|
Withdrawn |
1966-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 481:1977 |
Textile machinery and accessories — Warper's beams — Terminology and main dimensions |
|
Withdrawn |
1977-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.040.59
Textile and leather technology (Vocabularies)
;
59.120.20
Winding machines and equipment
|
| ISO 574:1979 |
Textile machinery and accessories — Perforated cylindrical tubes for cheese dyeing |
|
Withdrawn |
1979-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 575:1978 |
Textile machinery and accessories — Transfer cones — Half angle of the cone 4 degrees 20' |
Specifies the dimensions and tolerances of the cited transfer cones, which, after the cones for dyeing purposes have been removed from the dyed or bleached wound packages, are put in the packages for the purpose of re-processing. These transfer cones shall not be used for winding purposes. Also specified are the dimensions and tolerances of the gauges for checking these cones. - Replaces ISO Recommendation R 575-1967 and constitutes its technical revision.
|
Withdrawn |
1978-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 1037:1982 |
Textile machinery and accessories — Beams for dyeing slivers and yarn — Terminology and main dimensions |
|
Withdrawn |
1982-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 1472:1977 |
Textile machinery and accessories — Cylindrical tubes for draw-twisters — Dimensions and permissible run-out |
|
Withdrawn |
1977-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 1946:1976 |
Textile machinery and accessories — Condenser bobbins for woollen spinning — Dimensions |
|
Withdrawn |
1976-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 2013:1983 |
Textile machinery and accessories — Beams — Method of measuring variations of form and position |
|
Withdrawn |
1983-05 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 2065:1972 |
Textile machinery and accessories — Cylindrical tubes for tape yarns |
|
Withdrawn |
1972-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-1:1994 |
Textile machinery and accessories — Cylindrical tubes — Part 1: Recommended main dimensions |
Cancels and replaces the first edition (1982). Specifies the main dimensions of cylindrical tubes used in the field of textile machinery.
|
Published |
1994-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-2:1981 |
Textile machinery — Cylindrical tubes — Part 2: Tubes for open-end spinning machines |
|
Withdrawn |
1981-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-2:1994 |
Textile machinery and accessories — Cylindrical tubes — Part 2: Dimensions, tolerances and designation of tubes for open-end spinning machines |
Cancels and replaces the first edition (1981). Specifies the main dimensions, tolerances and designation of cylindrical tubes for open-end spinning. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.
|
Published |
1994-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-3:1984 |
Textile machinery and accessories — Cylindrical tubes — Part 3: Tubes for tape yarns |
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-3:1994 |
Textile machinery and accessories — Cylindrical tubes — Part 3: Dimensions, tolerances and designation of tubes for tape yarns |
Cancels and replaces the first edition (1984). Specifies the main dimensions, tolerances and designation of cylindrical tubes for tape yarns. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.
|
Published |
1994-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-4:1989 |
Textile machinery and accessories — Cylindrical tubes — Part 4: Tubes for textured yarns |
|
Withdrawn |
1989-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-4:1994 |
Textile machinery and accessories — Cylindrical tubes — Part 4: Dimensions, tolerances and designation of tubes for textured yarns |
Cancels and replaces the first edition (1989). Specifies the main dimensions, tolerances and designation of cylindrical tubes for textured yarns. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.
|
Withdrawn |
1994-11 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-5:1994 |
Textile machinery and accessories — Cylindrical tubes — Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns |
Gives the main dimensions, tolerances and designation of cylindrical tubes for continuous spin-drawn synthetic filament yarns. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.
|
Withdrawn |
1994-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-6:1994 |
Textile machinery and accessories — Cylindrical tubes — Part 6: Dimensions, tolerances and designation of tubes for cross-wound packages in winding and twisting |
Gives the main dimensions, tolerances and designation of cylindrical tubes for gross-wound packages in winding and twisting. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.
|
Withdrawn |
1994-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914-7:1994 |
Textile machinery and accessories — Cylindrical tubes — Part 7: Dimensions, tolerances and designation of perforated tubes for cheese dyeing |
Specifies the main dimensions, tolerances and designation of cylindrical tubes of perforated tubes for cheese dyeing. Gives directives for the characteristics of tubes and for the control of the inner diameter and length of the tube.
|
Published |
1994-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 3914:1976 |
Withdrawal of ISO 3914-1976 |
|
Withdrawn |
1976-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 5237:1978 |
Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 5 degrees 57' |
|
Withdrawn |
1978-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 5238-1:1982 |
Textile machinery and accessories — Packages of yarns and intermediate products — Part 1: Terminology |
The figures included illustrate the characteristics of the various packages and are not to scale. All packages are shown with their longitudinal axes in a horizontal position, irrespective of their position during the production and/or further processing.
|
Published |
1982-02 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
01.040.59
Textile and leather technology (Vocabularies)
;
59.120.20
Winding machines and equipment
|
| ISO 5238-2:1983 |
Textile machinery and accessories — Packages of yarns and intermediate products — Part 2: Forms of winding |
Suitable for winding yarns and similar products (for example, tape yarns, roving, sliver) onto tubes or other formers. It may be applied to spinning, twisting and winding machinery as well as to other machines fitted with winding devices. All forms of winding are a combination of the rotation of the package and the lateral movement of the yarn relative to the package.
|
Withdrawn |
1983-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 5239:1980 |
Textile machinery and accessories — Winding — Basic terms |
Defines basic terms used in the winding of yarns, onto formers or other suitable devices, by means of winding machines. This does not exclude the use of the terms in question for other textile processes, for example, spinning or twisting. Also applicable to yarn-like textile materials such as filaments and man-made tapes.
|
Published |
1980-07 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
01.040.59
Textile and leather technology (Vocabularies)
;
59.120.20
Winding machines and equipment
|
| ISO 5240:1978 |
Textile machinery and accessories — Warp creels — Terminology and main dimensions |
|
Withdrawn |
1978-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 5240:1994 |
Textile machinery and accessories — Warp creels — Main dimensions |
Cancels and replaces the first edition (1978). Establishes terminology for warp creels and specifies their main dimensions.
|
Published |
1994-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 6169:1982 |
Textile machinery and accessories — Flanged bobbins for doubling and twisting |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 6175:1983 |
Textile machinery and accessories — Recommended profile threads for weaver's beams |
|
Withdrawn |
1983-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-1:1985 |
Textile machinery and accessories — Beams for winding — Part 1: Vocabulary |
|
Withdrawn |
1985-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
01.040.59
Textile and leather technology (Vocabularies)
;
59.120.20
Winding machines and equipment
|
| ISO 8116-1:1995 |
Textile machinery and accessories — Beams for winding — Part 1: General vocabulary |
Gives the general vocabulary and the structure for the various types of beams for winding. Cancels and replaces the first edition, which has been technically revised.
|
Published |
1995-09 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
01.040.59
Textile and leather technology (Vocabularies)
;
59.120.20
Winding machines and equipment
|
| ISO 8116-2:1985 |
Textile machinery and accessories — Beams for winding — Part 2: Warper's beams — Terminology and main dimensions |
|
Withdrawn |
1985-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-2:1995 |
Textile machinery and accessories — Beams for winding — Part 2: Warper's beams |
Defines the basic terms and lays down the main dimensions, the variations of form and position, the driving devices and the designation for warper's beams with and without shafts. Cancels and replaces the first edition, which has been technically revised.
|
Withdrawn |
1995-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-2:2008 |
Textile machinery and accessories — Beams for winding — Part 2: Warper's beams |
ISO 8116-2:2008 specifies the main dimensions, mechanical strength, permissible tolerances of form and position of the main elements of warper's beams, and the driving devices and designation for warper's beams with and without shafts.
|
Published |
2008-12 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-3:1986 |
Textile machinery and accessories — Beams for winding — Part 3: Weaver's beams — Terminology and main dimensions |
|
Withdrawn |
1986-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-3:1995 |
Textile machinery and accessories — Beams for winding — Part 3: Weaver's beams |
Defines the basic terms and lays down the main dimensions and the variations in form and position for weaver's beams that are used for weaving preparation as well as weaving. Furthermore the main dimensions of the threads for weaver's beams are given. Cancels and replaces the first edition, which has been technically revised.
|
Withdrawn |
1995-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-3:2008 |
Textile machinery and accessories — Beams for winding — Part 3: Weaver's beams |
ISO 8116-3:2008 specifies the main dimensions, mechanical strength and permissible tolerances of form and position for weaver's beams that are used for weaving preparation as well as for weaving. The main dimensions of the profile threads for weaver's beams and the specifications for connections for automation of beam changing are also given.
|
Published |
2008-12 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-4:1985 |
Textile machinery and accessories — Beams for winding — Part 4: Quality classification of flanges for weaver's beams, warper's beams and sectional beams |
|
Withdrawn |
1985-11 |
Edition : 1 |
|
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-4:1995 |
Textile machinery and accessories — Beams for winding — Part 4: Quality classification of flanges for weaver's beams, warper's beams and sectional beams |
Explains the theoretical relationships and gives directives for practical use, allowing classification of beam flanges. The determination of the quality class of a beam flange is carried out by means of a force test. Cancels and replaces the first edition, which has been technically revised.
|
Withdrawn |
1995-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-4:2008 |
Textile machinery and accessories — Beams for winding — Part 4: Test methods and quality classification of flanges for weaver's beams, warper's beams and sectional beams |
ISO 8116-4:2008 specifies the test procedure for flanges for weaver's beams, warper's beams and sectional beams and the quality classes in this respect.
|
Published |
2008-12 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-5:1988 |
Textile machinery and accessories — Beams for winding — Part 5: Sectional beams for warp knitting machines — Terminology and main dimensions |
|
Withdrawn |
1988-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-5:1995 |
Textile machinery and accessories — Beams for winding — Part 5: Sectional beams for warp knitting machines |
Defines the basic terms and designation for sectional beams for warp knitting machines and lays down the main dimensions as well as the maximum values of variation of form and position for the main elements of these beams. Cancels and replaces the first edition, which has been technically revised.
|
Withdrawn |
1995-08 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-5:2008 |
Textile machinery and accessories — Beams for winding — Part 5: Sectional beams for warp knitting machines |
ISO 8116-5:2008 specifies the main dimensions, mechanical strength, designation and permissible values of tolerances of form and position for the main elements of sectional beams for warp knitting machines.
|
Published |
2008-12 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-6:1990 |
Textile machinery and accessories — Beams for winding — Part 6: Beams for ribbon weaving and ribbon knitting — Terminology and main dimensions |
|
Withdrawn |
1990-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-6:1995 |
Textile machinery and accessories — Beams for winding — Part 6: Beams for ribbon weaving and ribbon knitting |
Defines the basic terms and designation and lays down the main dimensions as well as the variation of form and position for beams for ribbon weaving and ribbon knitting. Cancels and replaces the first edition, which has been technically revised.
|
Withdrawn |
1995-08 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-7:1995 |
Textile machinery and accessories — Beams for winding — Part 7: Beams for dyeing slivers, rovings and yarns |
Defines the basic terms and designation and lays down the main dimensions as well as the driving devices for perforated beams used for dyeing slivers, rovings or yarns. This edition cancels and replaces ISO 1037, which has been technically revised.
|
Withdrawn |
1995-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-8:1995 |
Textile machinery and accessories — Beams for winding — Part 8: Definitions of run-out tolerances and methods of measurement |
Defines variations of form and position of beams for winding and gives methods of measuring such variations of form and position. The variations are related to axial circular run-out tolerance of flanges and total barrel run-out tolerance of beams with and without shafts. This edition cancels and replaces ISO 2013, which has been technically revised.
|
Withdrawn |
1995-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8116-9:1991 |
Textile machinery and accessories — Beams for winding — Part 9: Dyeing beams for textile fabrics |
Specifies the terminology, principal dimensions (for overall diameters from 400 mm to 1 200 mm) and designation of dyeing beams. Figure 1 and 2 illustrate the principal dimensions given in Table 1.
|
Published |
1991-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8489-1:1985 |
Textile machinery and accessories — Cones for cross-wound winding — Part 1: Values of half-angles, lengths and large inner diameters |
|
Withdrawn |
1985-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8489-1:1995 |
Textile machinery and accessories — Cones for cross winding — Part 1: Recommended main dimensions |
Contains recommended types of cones (values of half angles, lengths and large inner diameters) used in the field of textile industry.
|
Published |
1995-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8489-2:1995 |
Textile machinery and accessories — Cones for cross winding — Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30' |
Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 3° 30
'
. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.
|
Published |
1995-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8489-3:1995 |
Textile machinery and accessories — Cones for cross winding — Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' |
Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 4° 20
'
. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.
|
Published |
1995-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8489-4:1995 |
Textile machinery and accessories — Cones for cross winding — Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes |
Specifies the main dimensions, tolerances and designation of cones for cross winding for dyeing purposes with a half angle of cone 4° 20
'
. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.
|
Published |
1995-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 8489-5:1995 |
Textile machinery and accessories — Cones for cross winding — Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57' |
Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 5° 57
'
. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.
|
Published |
1995-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 10458:1993 |
Textile machinery — Square bars for winding devices relating to dyeing and finishing machines — Dimensions |
Specifies the dimensions of the square section of bars of types A and B.
|
Withdrawn |
1993-01 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 11111-4:2005 |
Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery |
ISO 11111-4:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for yarn processing, cordage and rope manufacturing machinery. It is applicable to all machinery, plant and related equipment intended to be used for the doubling, twisting, texturing, reeling, winding, ball winding, cordage, rope manufacturing and braiding.
|
Published |
2005-02 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
59.120.10
Spinning, twisting and texturing machines
;
59.120.20
Winding machines and equipment
|
| ISO 11111-4:2005/Amd 1:2009 |
Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 1 |
|
Published |
2009-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.10
Spinning, twisting and texturing machines
;
59.120.20
Winding machines and equipment
|
| ISO 11111-4:2005/Amd 2:2016 |
Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2 |
|
Published |
2016-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.10
Spinning, twisting and texturing machines
;
59.120.20
Winding machines and equipment
|
| ISO 13553:1994 |
Textile machinery and accessories — Weaver's beams — Specification for connections for automation of beam changing |
Provides specifications for the connections of weaver's beams for the purposes of automation of beam changing. This permits the beams on different weaving machines to be changed in a uniform manner.
|
Withdrawn |
1994-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120.20
Winding machines and equipment
|
| ISO 2569:1985 |
Cork stoppers — Types and general characteristics |
|
Withdrawn |
1985-10 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 6590-1:1983 |
Packaging — Sacks — Vocabulary and types — Part 1: Paper sacks |
This part of ISO 6590 defines terms commonly used in paper sack manufacture. It refers to single- and multi-ply sacks made from paper; it does not refer to bags for the retail trade. It specifies types of sacks, constructional details, materials and describes parts of a sack. It delivers alphabetical indices in three languages.
|
Published |
1983-12 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
55.080
Sacks. Bags
;
01.040.55
Packaging and distribution of goods (Vocabularies)
|
| ISO 6590-2:1986 |
Packaging — Sacks — Vocabulary and types — Part 2: Sacks made from thermoplastic flexible film |
This part of ISO 6590 defines terms commonly used in plastic sack manufacture. It refers to single- and multi-ply sacks made from thermoplastic flexible films; it does not refer to bags for the retail trade. It specifies types of sacks, constructional details, materials and describes parts of a sack. It delivers alphabetical indices in three languages.
|
Published |
1986-03 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
55.080
Sacks. Bags
;
01.040.55
Packaging and distribution of goods (Vocabularies)
|
| ISO 6591-1:1984 |
Packaging — Sacks — Description and method of measurement — Part 1: Empty paper sacks |
Description and dimensional designation of paper sacks are given by ten figures. Equipment, sampling, procedure and test report for the method of measurement are specified.
|
Published |
1984-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 6591-2:1985 |
Packaging — Sacks — Description and method of measurement — Part 2: Empty sacks made from thermoplastic flexible film |
Description and dimensional designation of plastic sacks are given by eight figures. Equipment, sampling, procedure, calculation and expression of results, test report for the method of measurement are specified.
|
Published |
1985-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 6599-1:1983 |
Packaging — Sacks — Conditioning for testing — Part 1: Paper sacks |
The principle consists in exposure of empty sacks to a conditioning atmosphere so that a state of temperature and moisture content equilibrium is reached between the sacks and this atmosphere. Conditioning atmospheres ar described by a table. Equipment, procedure and test report are specified.
|
Published |
1983-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 7023:1983 |
Packaging — Sacks — Method of sampling empty sacks for testing |
The principle consists in selection at random of a prescribes number of sacks from the lot following a two-stage procedure. Tables are given to determine the number of selected units and sacks. The method applies to all types of empty sacks
|
Published |
1983-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 7965-1:1984 |
Packaging — Sacks — Drop test — Part 1: Paper sacks |
Principle: The filled sack is raised above a rigid plane surface and released to strike this surface after free fall, the atmospheric conditions, the height of drop and the position of the package being set in advance. Various kinds of dropping are described. Test methods with progressive and constant drop height and limit height are specified. Annexes show examples of apparatus for drop testing, identification of surfaces of sacks and example of format for a drop test report.
|
Published |
1984-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO/DIS 7965-1 |
Packaging — Drop test — Part 1: Paper sacks |
|
Under development |
|
Edition : 2 |
Number of pages : 7 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 7965-2:1993 |
Sacks — Drop test — Part 2: Sacks made from thermoplastic flexible film |
Specifies a method of vertical impact testing, the testing procedure and how the results of tests should be presented. It may be performed either as a single test to investigate the effects of vertical impact or as a part of a sequence of tests designed to measure the ability of a sack to withstand a distribution system that includes a vertical impact hazard. The principle of the method is raising the filled sack above a rigid surface and releasing to strike this surface after a free fall, the atmospheric conditions, the height of the drop and the position of the package being set in advance.
|
Published |
1993-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO/TR 8281-1:1983 |
Packaging — Estimating the filled volume using the flat dimensions — Part 1: Paper sacks |
This part of ISO/TR 8281 establishes empirical equations for relating the flat dimensions of paper sacks to their capacity. The experimental methods used are also described. A voluminous annex delivers tables with results of filling trials. Three figures show nomographs for volume determination.
|
Withdrawn |
1983-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 8351-1:1994 |
Packaging — Method of specification for sacks — Part 1: Paper sacks |
Provides a checklist for the characteristics of paper sacks to be specified when ordering. These ordering specifications cover the decription of the sack and do not deal with quantitative performance requirements. Is primarily intended for application to the types of paper sacks as specified in ISO 6590-2.
|
Published |
1994-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 8351-2:1994 |
Packaging — Method of specification for sacks — Part 2: Sacks made from thermoplastic flexible film |
Provides a checklist for the characteristics to be specified when ordering sacks made from thermoplastic flexible films. These ordering specifications cover the decription of the sack and do not deal with quantitative performance requirements. Is primarily intended for application to the types of sacks made from thermoplastic flexible films as specified in ISO 6590-2.
|
Published |
1994-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 8367-1:1993 |
Packaging — Dimensional tolerances for general purpose sacks — Part 1: Paper sacks |
The tolerances of the following dimensions of paper sacks as defined in ISO 6590-1 are specified: ply grammage, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, print position on sack.
|
Published |
1993-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 8367-2:1993 |
Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film |
The tolerances of the following dimensions of sacks made from thermoplastic flexible film as defined in ISO 6590-2 are specified: thickness of plies, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, length of the valve sleeve, print position on sack.
|
Published |
1993-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 9884-1:1994 |
Tea sacks — Specification — Part 1: Reference sack for palletized and containerized transport of tea |
Specifies the materials, construction and dimensions of a reference sack suitable for the palletized and containerized transport of tea.
|
Published |
1994-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
55.080
Sacks. Bags
;
67.140.10
Tea
|
| ISO 9884-2:1999 |
Tea sacks — Specification — Part 2: Performance specification for sacks for palletized and containerized transport of tea |
This part of ISO 9884 specifies requirements and tests to determine the suitability of sacks for the palletized and
containerized transport of tea on standard pallets of standard unit load size in standard containers (see
ISO 9884-1).
|
Published |
1999-04 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
55.080
Sacks. Bags
;
67.140.10
Tea
|
| ISO 11897:1999 |
Packaging — Sacks made from thermoplastic flexible film — Tear propagation on edge folds |
|
Published |
1999-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 15119:2000 |
Packaging — Sacks — Determination of the friction of filled sacks |
This International Standard specifies three methods for the determination of the friction of filled sacks.
|
Published |
2000-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
55.080
Sacks. Bags
|
| ISO 15867:2003 |
Intermediate bulk containers (IBCs) for non-dangerous goods — Terminology |
ISO 15867:2003 defines basic terminology for all forms of IBCs intended to transport non-dangerous goods.
|
Published |
2003-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.080
Sacks. Bags
;
01.040.55
Packaging and distribution of goods (Vocabularies)
|
| ISO 23560:2008 |
Woven polypropylene sacks for bulk packaging of foodstuffs |
ISO 23560:2008 specifies the general characteristics, requirements and methods of test for woven polypropylene (PP) sacks. It is applicable to woven PP sacks, having a capacity of 50 kg or 25 kg, intended for the transport and storage of foodstuffs, such as cereals, sugar and pulses.
|
Withdrawn |
2008-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
55.080
Sacks. Bags
;
83.140.99
Other rubber and plastics products
|
| ISO 23560:2015 |
Woven polypropylene sacks for bulk packaging of foodstuffs |
ISO 23560:2015 specifies the general characteristics, requirements, and methods of test for woven polypropylene (PP) sacks. It is applicable to woven PP sacks, having a capacity of 50 kg or 25 kg, intended for the transport and storage of foodstuffs, such as cereals, sugar, and pulses.
|
Published |
2015-03 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
55.080
Sacks. Bags
;
83.140.99
Other rubber and plastics products
|
| ISO/R 1115:1969 |
Withdrawal of ISO/R 1115-1969 |
|
Withdrawn |
1969-09 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
55.100
Bottles. Pots. Jars
|
| ISO 2569:1973 |
Cork stoppers — Classification and characteristics |
|
Withdrawn |
1973-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 2569:1994 |
Cork stoppers — Vocabulary |
Defines the types and general characteristics of cork stoppers and gives 25 terms for this field.
|
Withdrawn |
1994-07 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
;
01.040.55
Packaging and distribution of goods (Vocabularies)
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 3863:1980 |
Cork — Cylindrical stoppers — Dimensional characteristics |
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 3863:1989 |
Cylindrical cork stoppers — Dimensional characteristics, sampling, packaging and marking |
For the purpose of this standard, which constitutes the technically revised second edition, the definitions in ISO 2569 apply. Sampling shall be made according to ISO 4707. Designation consists of the words "cylindrical cork stoppers" followed by the figures which correspond to their length and diameter, in millimetres, separated by a cross.
|
Withdrawn |
1989-06 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 4707:1981 |
Cork — Stoppers — Sampling for inspection of dimensional characteristics |
The relevant terms and definitions are listed. From the dimensional point of view the acceptable quality level (AQL) is specified in the relation of lot size and bulk sample size. The AQL is a quality level which in a sampling plan corresponds to a specified but relatively high probability of acceptance (this definition is taken from ISO 3534).
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 4710:1988 |
Cork stoppers for sparkling wines and gasified wines — Specifications |
|
Withdrawn |
1988-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 4710:2000 |
Cork — Cylindrical stoppers for sparkling wines and gasified wines — Characteristics |
This International Standard specifies the characteristics of cylindrical cork stoppers for sparkling wines and gasified
wines.
|
Published |
2000-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 7348:1992 |
Glass containers — Manufacture — Vocabulary |
Gives terms and definitions in English, French and Russian as well as indexes (Annex A) in English, French and Russian.
|
Published |
1992-03 |
Edition : 1 |
Number of pages : 78 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
01.040.55
Packaging and distribution of goods (Vocabularies)
|
| ISO 7458:1984 |
Glass containers — Internal pressure resistance — Test methods |
Two methods are specified for the determination: In method A an uniform internal pressure is used for a predetermined period and in method B an internal pressure increasing at a constant rate will be applied. For both methods the procedure, apparatus and test report, resp., are specified.
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.100
Bottles. Pots. Jars
|
| ISO 7458:2004 |
Glass containers — Internal pressure resistance — Test methods |
ISO 7458:2004 specifies two test methods for the determination of the internal pressure resistance of glass containers, Method A by application of uniform internal pressure for a predetermined period and Method B by application of internal pressure increasing at a predetermined constant rate.
|
Published |
2004-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
55.100
Bottles. Pots. Jars
|
| ISO 7459:1984 |
Glass containers — Thermal shock resistance and thermal shock endurance — Test methods |
The containers are subjected to a sudden change temperature, i.e. to cold and hot bath, for determing their performance. Apparatus, sampling and procedures are specified. The requirements apply only to containers made of soda-silica glass.
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.100
Bottles. Pots. Jars
|