| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 15027-3:2002 |
Immersion suits — Part 3: Test methods |
|
Withdrawn |
2002-03 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 15027-3:2012 |
Immersion suits — Part 3: Test methods |
ISO 15027-3:2012 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits.
Requirements for constant wear suits are given in ISO 15027-1:2012 and requirements for abandonment suits are given in ISO 15027-2:2012.
|
Published |
2012-11 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/DIS 15027-3 |
Immersion suits — Part 3: Test methods |
|
Under development |
|
Edition : 3 |
Number of pages : 47 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 12312-1:2013 |
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use |
ISO 12312-1:2012 is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation.
|
Withdrawn |
2013-08 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 15383:2001 |
Protective gloves for firefighters — Laboratory test methods and performance requirements |
This International Standard specifies test methods and minimum requirements for protective gloves to be worn
during fire fighting and associated activities where there is a risk of heat and/or flame.
The purpose of this International Standard is to provide minimum performance requirements for protective gloves
designed to protect against injury in fire fighting operations.
This International Standard covers the general glove design, the minimum performance levels of the materials used
and the methods of test for determining these performance levels. With the exception of flame resistance and
ergonomic requirements, this International Standard establishes three levels of performance for all other
performance requirements. Type 3 gloves provide a higher level of thermal insulation and physical protection, and
require liquid penetration resistance (including synthetic blood) as compared to Type 2 gloves. Type 1 gloves are
intended to provide minimum requirements for gloves in any fire fighting application, such as for wildland fire
fighting. Annex E provides a comparison of the performance requirements for all three glove types.
This International Standard does not cover special gloves for use in other high risk situations such as specialized
fire fighting. It does not cover protection for the head, torso, arms, legs and feet or protection of the hands against
other hazards, e.g. chemical, biological, radiation and electrical hazards, except for limited, accidental exposure to
fireground chemicals and contaminated blood or body fluids (Type 3 gloves). These aspects may be dealt with in
other standards.
Selection of the appropriate system of clothing, including gloves, is dependant on carrying out an effective risk
assessment which identifies the hazards to be faced, evaluates the likelihood of those hazards and provides the
means of reducing or eliminating these hazards. Guidelines for conducting a risk assessment and some factors for
consideration are included in annex D.
|
Published |
2001-09 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
13.340.10
Protective clothing
;
13.340.40
Hand and arm protection
|
| ISO 15384:2003 |
Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland firefighting clothing |
ISO 15384:2003 specifies methods of test and minimum performance requirements for protective clothing to be worn in wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. ISO 15384:2003 applies to the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels.
ISO 15384:2003 is not applicable to clothing for use in risk situations where clothing complying with ISO 11613 or ISO 15538 is more suitable, nor does ISO 15384:2003 cover clothing to protect against chemical, biological, electrical or radiation hazards.
ISO 15384:2003 is not applicable to protection of the head (it may cover the neck), eyes, hand, feet and respiratory system. These aspects may be dealt with in other International Standards.
|
Withdrawn |
2003-04 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 15384:2018 |
Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland firefighting clothing |
This document specifies methods of test and minimum performance requirements for personal protective clothing, designed to protect the wearer's body, except for the head, hands, and feet, that is worn during wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. This document covers the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels.
This document is not applicable to clothing for use in situations encountered in structural firefighting (EN 469 or ISO 11999-3), rescue (ISO 18639) or where a high level of infrared radiation is expected (ISO 15538 or EN 1486), nor does this document cover clothing to protect against chemical, biological, electrical or radiation hazards. This document does not provide protection against high mechanical risks such as for protection when using chain saws.
|
Published |
2018-06 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 15384:2018/Amd 1:2021 |
Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland firefighting clothing — Amendment 1 |
|
Published |
2021-09 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 15538:2001 |
Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
This International Standard specifies test methods and minimum performance requirements for protective clothing
that relies upon the ability of the outer material to reflect intense radiant heat.
The clothing covered by this International Standard is intended to provide protection against flame lick and intense
radiant heat and it should be worn for short periods only.
Subject to a risk assessment, this type of clothing may also be used for certain industrial and other applications.
Subject to a risk assessment, other types of protective clothing, for example clothing complying with the
requirements of ISO 11613, may be used for the types of firefighting and industrial applications envisaged by this
International Standard in conjunction with appropriate protection for the head, face, hands and feet as well as
suitable respiratory protection.
This International Standard does not consider requirements for the protection of the head (including the face),
hands and feet other than those specified in 4.2 and 4.3. Any other requirements specific to the protection of head
(including the face), hands and feet required by the user should be determined by a risk assessment and specified.
|
Published |
2001-10 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17491-3:2008 |
Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) |
ISO 17491-3:2008 specifies a test method for determining the resistance of protective clothing against penetration by a jet of liquid.
ISO 17491-3:2008 is applicable to clothing with liquid-tight connections between different parts of the clothing and, if applicable, between the clothing and other items of personal protective equipment worn with it.
ISO 17491-3:2008 does not address chemical permeation resistance of the clothing materials, which is specified in other standards.
|
Published |
2008-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 16073-1:2019 |
Wildland firefighting personal protective equipment — Requirements and test methods — Part 1: General |
This document specifies the minimum performance requirements and methods of test for personal protective equipment (PPE) covering the torso, neck, arms, hands, legs, feet, head, eyes and hearing that is used for wildland firefighting.
This document covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. The PPE is not intended to provide protection during fire entrapment.
This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538).
Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in this document. Users are directed to those relevant standards for the requirements associated with such protection.
To assist with selection of the right PPE, a risk assessment (see Annex A) can be conducted to determine the type of PPE, and performance levels, for different categories of protection are required.
This document describes performance requirements for PPE and includes requirements for marking and manufacturer's instructions.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.10
Protective clothing
|
| ISO 16073-2:2019 |
Wildland firefighting personal protective equipment — Requirements and test methods — Part 2: Compatibility |
This document specifies the minimum performance requirements and test methods for assessing compatibility of wildland firefighters' personal protective equipment (PPE).
This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538).
Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional compatibility testing to that provided in this document. Users are directed to those relevant standards for the requirements associated with such protection.
|
Published |
2019-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.10
Protective clothing
|
| ISO 16073-3:2019 |
Wildland firefighting personal protective equipment — Requirements and test methods — Part 3: Clothing |
This document specifies test methods and minimum performance requirements for personal protective clothing, designed to protect the wearer's body, except for the head, hands, and feet, that is worn during wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. This document covers the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels.
This document is not applicable to clothing for use in situations encountered in structural firefighting (ISO 11999‑3), rescue (ISO 18639‑3) or where a high level of infrared radiation is expected (ISO 15538), nor does this document cover clothing to protect against chemical, biological, electrical or radiation hazards. This document does not provide protection against high mechanical risks such as for protection when using chain saws.
NOTE For information on test methods, minimum performance requirements and general design refer to ISO 15384.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.10
Protective clothing
|
| ISO 16073-4:2019 |
Wildland firefighting personal protective equipment — Requirements and test methods — Part 4: Gloves |
This document specifies the minimum performance requirements and methods of test for personal protective equipment (PPE), gloves, that cover the hands whilst wildland firefighting.
This document covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. This PPE is not intended to provide protection during fire entrapment. A risk assessment (see ISO/TR 21808) can be undertaken to determine if the gloves covered by this document are suitable for their intended use and the expected exposure.
This document does not cover PPE for structural firefighting (see ISO 11999‑4), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538).
Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in this document. Users can refer to the relevant standards for the requirements associated with such protection.
|
Published |
2019-11 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.10
Protective clothing
|
| ISO 16073:2011 |
Wildland firefighting personal protective equipment — Requirements and test methods |
ISO 16073:2011 specifies the minimum performance requirements and methods of test for personal protective equipment (PPE) covering the torso, neck, arms, hands, legs, feet, head, eyes and hearing for wildland firefighting.
It covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. This PPE is not intended to provide protection during fire entrapment.
ISO 16073:2011 does not cover PPE for structural firefighting, for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required.
Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in ISO 16073:2011.
|
Withdrawn |
2011-02 |
Edition : 1 |
Number of pages : 72 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.10
Protective clothing
|
| ISO/CD 23762 |
Protective clothing – Enhanced visibility clothing for medium risk situations – Test methods and requirements |
|
Deleted |
|
Edition : 1 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO/CD 16602-1.2 |
Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 1: General |
ISO 16602:2007 establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by ISO 16602:2007 include, but may not be limited to, totally encapsulating suits, liquid-tight or spray-tight suits, coveralls, jackets, trousers, aprons, smocks, hoods, sleeves, and shoe and boot covers.
Chemical protective clothing for protection against airborne particles is addressed by ISO 13982-1, which is referenced in ISO 16602:2007. ISO 16602:2007 does not address protection against solid chemicals in forms other than airborne solid particulates (e.g. it does not address the challenge of penetration of chemical dust and powders through materials and clothing by rubbing or flexing or by simple direct contact of dust or powders onto the clothing surface).
ISO 16602:2007 does not address gloves, boots, eye/face protection devices and respiratory protective devices unless they are an integral part of the protective clothing. ISO 16602:2007 does not address protection against biological or thermal (hot or cold) hazards, ionizing radiation, or radioactive contamination. ISO 16602:2007 also does not address the specialized clothing used in hazardous chemical emergencies.
ISO 16602:2007 is intended to provide chemical protective clothing manufacturers with minimum requirements for testing, classifying, and labelling chemical protective clothing. To assist the users of products covered under ISO 16602:2007, this document provides descriptions of referenced test methods, guidelines for conducting hazard and risk assessments and suggested performance levels for certain applications. It is not the intent of ISO 16602:2007 to address all situations.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO/CD 16602-2.2 |
Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 2: Physical test methods, classification and requirements |
ISO 16602:2007 establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by ISO 16602:2007 include, but may not be limited to, totally encapsulating suits, liquid-tight or spray-tight suits, coveralls, jackets, trousers, aprons, smocks, hoods, sleeves, and shoe and boot covers.
Chemical protective clothing for protection against airborne particles is addressed by ISO 13982-1, which is referenced in ISO 16602:2007. ISO 16602:2007 does not address protection against solid chemicals in forms other than airborne solid particulates (e.g. it does not address the challenge of penetration of chemical dust and powders through materials and clothing by rubbing or flexing or by simple direct contact of dust or powders onto the clothing surface).
ISO 16602:2007 does not address gloves, boots, eye/face protection devices and respiratory protective devices unless they are an integral part of the protective clothing. ISO 16602:2007 does not address protection against biological or thermal (hot or cold) hazards, ionizing radiation, or radioactive contamination. ISO 16602:2007 also does not address the specialized clothing used in hazardous chemical emergencies.
ISO 16602:2007 is intended to provide chemical protective clothing manufacturers with minimum requirements for testing, classifying, and labelling chemical protective clothing. To assist the users of products covered under ISO 16602:2007, this document provides descriptions of referenced test methods, guidelines for conducting hazard and risk assessments and suggested performance levels for certain applications. It is not the intent of ISO 16602:2007 to address all situations.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO/CD 16602-3.2 |
Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 3: Chemical test methods, classification and requirements |
ISO 16602:2007 establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by ISO 16602:2007 include, but may not be limited to, totally encapsulating suits, liquid-tight or spray-tight suits, coveralls, jackets, trousers, aprons, smocks, hoods, sleeves, and shoe and boot covers.
Chemical protective clothing for protection against airborne particles is addressed by ISO 13982-1, which is referenced in ISO 16602:2007. ISO 16602:2007 does not address protection against solid chemicals in forms other than airborne solid particulates (e.g. it does not address the challenge of penetration of chemical dust and powders through materials and clothing by rubbing or flexing or by simple direct contact of dust or powders onto the clothing surface).
ISO 16602:2007 does not address gloves, boots, eye/face protection devices and respiratory protective devices unless they are an integral part of the protective clothing. ISO 16602:2007 does not address protection against biological or thermal (hot or cold) hazards, ionizing radiation, or radioactive contamination. ISO 16602:2007 also does not address the specialized clothing used in hazardous chemical emergencies.
ISO 16602:2007 is intended to provide chemical protective clothing manufacturers with minimum requirements for testing, classifying, and labelling chemical protective clothing. To assist the users of products covered under ISO 16602:2007, this document provides descriptions of referenced test methods, guidelines for conducting hazard and risk assessments and suggested performance levels for certain applications. It is not the intent of ISO 16602:2007 to address all situations.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO/CD 16602-4.2 |
Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 4: Design test methods, classification and requirements |
ISO 16602:2007 establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by ISO 16602:2007 include, but may not be limited to, totally encapsulating suits, liquid-tight or spray-tight suits, coveralls, jackets, trousers, aprons, smocks, hoods, sleeves, and shoe and boot covers.
Chemical protective clothing for protection against airborne particles is addressed by ISO 13982-1, which is referenced in ISO 16602:2007. ISO 16602:2007 does not address protection against solid chemicals in forms other than airborne solid particulates (e.g. it does not address the challenge of penetration of chemical dust and powders through materials and clothing by rubbing or flexing or by simple direct contact of dust or powders onto the clothing surface).
ISO 16602:2007 does not address gloves, boots, eye/face protection devices and respiratory protective devices unless they are an integral part of the protective clothing. ISO 16602:2007 does not address protection against biological or thermal (hot or cold) hazards, ionizing radiation, or radioactive contamination. ISO 16602:2007 also does not address the specialized clothing used in hazardous chemical emergencies.
ISO 16602:2007 is intended to provide chemical protective clothing manufacturers with minimum requirements for testing, classifying, and labelling chemical protective clothing. To assist the users of products covered under ISO 16602:2007, this document provides descriptions of referenced test methods, guidelines for conducting hazard and risk assessments and suggested performance levels for certain applications. It is not the intent of ISO 16602:2007 to address all situations.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO/CD 16602-5.2 |
Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 5: Garment test methods, classification and requirements |
ISO 16602:2007 establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by ISO 16602:2007 include, but may not be limited to, totally encapsulating suits, liquid-tight or spray-tight suits, coveralls, jackets, trousers, aprons, smocks, hoods, sleeves, and shoe and boot covers.
Chemical protective clothing for protection against airborne particles is addressed by ISO 13982-1, which is referenced in ISO 16602:2007. ISO 16602:2007 does not address protection against solid chemicals in forms other than airborne solid particulates (e.g. it does not address the challenge of penetration of chemical dust and powders through materials and clothing by rubbing or flexing or by simple direct contact of dust or powders onto the clothing surface).
ISO 16602:2007 does not address gloves, boots, eye/face protection devices and respiratory protective devices unless they are an integral part of the protective clothing. ISO 16602:2007 does not address protection against biological or thermal (hot or cold) hazards, ionizing radiation, or radioactive contamination. ISO 16602:2007 also does not address the specialized clothing used in hazardous chemical emergencies.
ISO 16602:2007 is intended to provide chemical protective clothing manufacturers with minimum requirements for testing, classifying, and labelling chemical protective clothing. To assist the users of products covered under ISO 16602:2007, this document provides descriptions of referenced test methods, guidelines for conducting hazard and risk assessments and suggested performance levels for certain applications. It is not the intent of ISO 16602:2007 to address all situations.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO/CD 16602-6.2 |
Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 6: Guidance for selection, use, care and maintenance |
ISO 16602:2007 establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by ISO 16602:2007 include, but may not be limited to, totally encapsulating suits, liquid-tight or spray-tight suits, coveralls, jackets, trousers, aprons, smocks, hoods, sleeves, and shoe and boot covers.
Chemical protective clothing for protection against airborne particles is addressed by ISO 13982-1, which is referenced in ISO 16602:2007. ISO 16602:2007 does not address protection against solid chemicals in forms other than airborne solid particulates (e.g. it does not address the challenge of penetration of chemical dust and powders through materials and clothing by rubbing or flexing or by simple direct contact of dust or powders onto the clothing surface).
ISO 16602:2007 does not address gloves, boots, eye/face protection devices and respiratory protective devices unless they are an integral part of the protective clothing. ISO 16602:2007 does not address protection against biological or thermal (hot or cold) hazards, ionizing radiation, or radioactive contamination. ISO 16602:2007 also does not address the specialized clothing used in hazardous chemical emergencies.
ISO 16602:2007 is intended to provide chemical protective clothing manufacturers with minimum requirements for testing, classifying, and labelling chemical protective clothing. To assist the users of products covered under ISO 16602:2007, this document provides descriptions of referenced test methods, guidelines for conducting hazard and risk assessments and suggested performance levels for certain applications. It is not the intent of ISO 16602:2007 to address all situations.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO 16602:2007 |
Protective clothing for protection against chemicals — Classification, labelling and performance requirements |
ISO 16602:2007 establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items covered by ISO 16602:2007 include, but may not be limited to, totally encapsulating suits, liquid-tight or spray-tight suits, coveralls, jackets, trousers, aprons, smocks, hoods, sleeves, and shoe and boot covers.
Chemical protective clothing for protection against airborne particles is addressed by ISO 13982-1, which is referenced in ISO 16602:2007. ISO 16602:2007 does not address protection against solid chemicals in forms other than airborne solid particulates (e.g. it does not address the challenge of penetration of chemical dust and powders through materials and clothing by rubbing or flexing or by simple direct contact of dust or powders onto the clothing surface).
ISO 16602:2007 does not address gloves, boots, eye/face protection devices and respiratory protective devices unless they are an integral part of the protective clothing. ISO 16602:2007 does not address protection against biological or thermal (hot or cold) hazards, ionizing radiation, or radioactive contamination. ISO 16602:2007 also does not address the specialized clothing used in hazardous chemical emergencies.
ISO 16602:2007 is intended to provide chemical protective clothing manufacturers with minimum requirements for testing, classifying, and labelling chemical protective clothing. To assist the users of products covered under ISO 16602:2007, this document provides descriptions of referenced test methods, guidelines for conducting hazard and risk assessments and suggested performance levels for certain applications. It is not the intent of ISO 16602:2007 to address all situations.
|
Published |
2007-12 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 16602:2007/Amd 1:2012 |
Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Amendment 1 |
|
Published |
2012-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 16603:2004 |
Clothing for protection against contact with blood and body fluids — Determination of the resistance of protective clothing materials to penetration by blood and body fluids — Test method using synthetic blood |
ISO 16603:2004 describes a laboratory test method for measuring the penetration resistance of clothing materials to blood and body fluids. This test method uses a synthetic blood in continuous contact with the material specimen at specified set of conditions using the ISO 13994 test apparatus.
This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorb the synthetic blood.
|
Published |
2004-04 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 16604:2004 |
Clothing for protection against contact with blood and body fluids — Determination of resistance of protective clothing materials to penetration by blood-borne pathogens — Test method using Phi-X 174 bacteriophage |
ISO 16604:2004 describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens. This test method uses a surrogate microbe under conditions of continuous liquid contact. Protective clothing "pass/fail" determinations are based on the detection of viral penetration at a specific hydrostatic pressure using the ISO 13994 test apparatus.
This test method is not always effective in testing protective clothing materials having thick, inner liners which readily absorbs the challenge fluid.
This test method involves a sensitive assay procedure. Because of the length of time required to complete this test method, it might not be suitable for use as a material or protective clothing quality control or assurance procedure.
|
Published |
2004-04 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17491-1:2012 |
Protective clothing — Test methods for clothing providing protection against chemicals — Part 1: Determination of resistance to outward leakage of gases (internal pressure test) |
This part of ISO 17491 specifies a method to be performed either at minimum test settings (Method 1) or at
more rigorous test settings (Method 2), for assessing the resistance of a gas-tight suit to outward leakage of
air through, for example, essential openings, fastenings, seams, interface areas between items, pores and any
imperfections in the construction materials.
This test does not simulate penetration by gases in an inward direction. Although the danger to the wearer
arises from leakage in an inward direction, this test method assesses the outward leakage of air after the gastight
suit has been inflated so as to stretch the construction material, thereby enabling the test method to detect
very small imperfections, such as holes, splits or tears.
|
Published |
2012-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17491-2:2012 |
Protective clothing — Test methods for clothing providing protection against chemicals — Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test) |
|
Published |
2012-04 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17491-4:2008 |
Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) |
ISO 17491-4:2008 specifies methods for determining the resistance of chemical protective clothing to penetration by sprays of liquid chemicals at two different levels of intensity:
Method A: low-level spray test. This is applicable to clothing that covers the full body surface and which is intended to be worn when there is a potential risk of exposure to small quantities of spray or accidental low volume splashes of a liquid chemical.
Method B: high level spray test This is applicable to clothing with spray-tight connections between different parts of the clothing and, if applicable, between the clothing and other items of personal protective equipment, which covers the full body surface and which is intended to be worn when there is a risk of exposure to sprayed particles of liquid.
|
Published |
2008-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17491-4:2008/Amd 1:2016 |
Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) — Amendment 1 |
|
Published |
2016-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/DIS 17491-4 |
Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) |
|
Under development |
|
Edition : 2 |
Number of pages : 19 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17491-5:2013 |
Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test) |
ISO 17491-5:2013 specifies an alternative test method to the one described in ISO 17491-4.
The method for determining the resistance to chemical spray penetration differs from the method in ISO 17491-4 in that it uses a static manikin instead of a test subject. It also uses a different spray configuration and duration.
|
Published |
2013-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/CD 17491-5 |
Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test) |
ISO 17491-5:2013 specifies an alternative test method to the one described in ISO 17491-4.
The method for determining the resistance to chemical spray penetration differs from the method in ISO 17491-4 in that it uses a static manikin instead of a test subject. It also uses a different spray configuration and duration.
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17491:2002 |
Protective clothing — Protection against gaseous and liquid chemicals — Determination of resistance of protective clothing to penetration by liquids and gases |
|
Withdrawn |
2002-04 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17492:2003 |
Clothing for protection against heat and flame — Determination of heat transmission on exposure to both flame and radiant heat |
ISO 17492:2003 specifies a test method for measuring the heat transfer of horizontally mounted flame-resistant textile materials when exposed to a combination of convective and radiant energy.
This test method can be used for any type of sheet material used either as a single layer or in a multilayer construction when all structures or sub-assemblies are made of flame-resistant materials. It is not intended to be used on materials that are not flame resistant.
This test method is not intended for evaluating materials exposed to any other type of thermal-energy sources, such as radiant heat only or flame contact only. Use ISO 6942 when evaluating heat-transfer through materials due to radiant heat only and use ISO 9151 when evaluating heat-transfer through materials due to flame contact only.
ISO 17492:2003 should be used to measure and describe the properties of materials, products or assemblies in response to both convective and radiant energy under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, the results of this test method may be used as elements of a fire-risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use.
|
Withdrawn |
2003-05 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17492:2003/Cor 1:2004 |
Clothing for protection against heat and flame — Determination of heat transmission on exposure to both flame and radiant heat — Technical Corrigendum 1 |
|
Withdrawn |
2004-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/DIS 24231 |
Protective clothing — Protection against rain — Test method for ready-made garments against high-energy droplets from above |
|
Under development |
|
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/DIS 24232 |
Protective clothing — Protection against rain |
|
Under development |
|
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 12312-1:2013/Amd 1:2015 |
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use — Amendment 1 |
|
Withdrawn |
2015-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 17492:2019 |
Clothing for protection against heat and flame — Determination of heat transmission on exposure to both flame and radiant heat |
This document specifies a test method for measuring the heat transferred through horizontally mounted flame-resistant textile materials when exposed to a combination of convective and radiant heat. The exposure conditions are adjusted to be approximately a 50/50 mixture of pure convective heat and pure radiant heat. The total exposure heat flux is 84 kW/m2.
This test method is applicable to any type of sheet material used either as a single layer or in a multilayer construction when all structures or sub-assemblies are made of flame-resistant materials. It does not apply to materials that are not flame resistant.
This test method does not apply to the evaluation of materials exposed to any other type of thermal energy sources, such as radiant heat only or flame contact only. ISO 6942 is applicable when evaluating materials for exposure to radiant heat only. ISO 9151 is applicable when evaluating materials due to flame contact only.
NOTE Some, but not all, textiles materials can ignite and continue to burn after exposure to the convective and radiant heat produced by this test method.
|
Published |
2019-10 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17493:2000 |
Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven |
|
Withdrawn |
2000-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17493:2016 |
Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven |
ISO 17493:2016 describes a test method for evaluating the heat resistance of protective clothing materials or items and equipment when exposed in a hot air circulating oven. The method is intended to evaluate physical changes in a material at a given exposure temperature. Materials are evaluated for defined visible changes including the measurement of shrinkage.
Different procedures are provided depending on the type of the protective clothing material or item being tested.
|
Published |
2016-12 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17723-1:2019 |
PPE ensembles for firefighters undertaking hazardous materials response activities — Part 1: Gas-tight, vapour-protective ensembles for emergency response teams ("type 1") |
This document establishes minimum design and performance requirements for personal protective ensembles to be worn during hazardous materials responses involving chemical gas, vapour, liquid, and particulate hazards. This document provides optional criteria to address protection during terrorism involving chemical and biological agents. This document provides optional criteria to address the ability of ensembles to retain their integrity during escape in the event of chemical flash fire. This document does not establish minimum criteria for protection against radiological hazards, flammable, or explosive atmospheres. This document does not pertain to clothing providing the high level of heat and flame protection that is required for fighting fires. This document does not address respiratory protection.
|
Published |
2019-08 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 18639-3:2018 |
PPE ensembles for firefighters undertaking specific rescue activities — Part 3: Clothing |
ISO 18639-3:2018 specifies test methods and minimum performance requirements for protective clothing for firefighters while engaged in rescue activities.
Clothing related to specific rescue activities are documented in individual subclauses, see 6.2.1 or 6.2.2.
NOTE For further guidance see ISO 18639‑1.
Subclauses of this document cover general clothing design, the minimum performance level of the materials used and the methods of test for determining this performance level.
ISO 18639-3:2018 does not cover special clothing for use in other high risk situations such as firefighting.
ISO 18639-3:2018 does not cover protection for the head, hands and feet or protection against other hazards, e.g. chemical, biological, radiation and electrical hazards, except for limited, accidental exposure to some chemicals and contaminated blood or other body fluids.
|
Published |
2018-01 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 18640-1:2018 |
Protective clothing for firefighters — Physiological impact — Part 1: Measurement of coupled heat and moisture transfer with the sweating torso |
This document provides a test method for evaluating the physiological impact of protective fabric ensembles and potentially protective clothing ensembles in a series of simulated activities (phases) under defined ambient conditions. This standard test method characterizes the essential properties of fabric assemblies of a representative garment or clothing ensemble for thermo-physiological assessment:
— dry thermal insulation;
— cooling properties during average metabolic activity and moisture management (dry and wet heat transfer);
— drying behaviour.
Default measurements are done on fabric samples representing the garment or protective clothing combination. Optionally and in addition to the standard test method, the same testing protocol can be applied to characterise more complex protective clothing ensembles including underwear, air layer and certain design features[1]. In addition, measurements on readymade garments are possible.
This test method is intended to be used to measure and describe the behaviour of fabric assemblies of a garment or clothing ensemble in response to a simulated series of activities under controlled laboratory conditions, with the results used to optimize garment combinations and material selection. Furthermore, this document together ISO 18640-2, is intended to be used to describe the thermo-physiological impact of protective clothing but not the risk for heat stress under actual fire conditions. The results of this test can be used as elements of a risk assessment with respect to thermo-physiological load.
[1] A study conducted by Empa (Swiss Federal Laboratories for Materials Science and Technology, Switzerland) showed good correlation between results of standard torso tests (without underwear and air layers on fabrics) to tests on fabrics with underwear, tests on fabrics with underwear and air layers and test on readymade garments (with underwear and with or without air layers) of the same material composition. Due to the added thermal insulation values of the additional layers direct comparison of results between different measurement configurations is not possible, however.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 18640-1:2018/Amd 1:2019 |
Protective clothing for firefighters — Physiological impact — Part 1: Measurement of coupled heat and moisture transfer with the sweating torso — Amendment 1 |
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 18640-2:2018 |
Protective clothing for firefighters — Physiological impact — Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters |
This document specifies a method for evaluating the thermo-physiological impact of protective fabric ensembles and potentially protective clothing ensembles in a simulated activity under defined relevant conditions for firefighters.
This document is intended to be used to assess the thermo-physiological impact of protective fabric ensembles and potentially protective clothing ensembles but not the risk for heat stress due to actual fire conditions. The results of this test method can be used as elements of characterisation and comparison of thermo-physiological impact of various types of protective fabric ensembles and potentially protective clothing ensembles.
Default measurements are undertaken on fabric samples representing the garment or protective clothing combination. Optionally and in addition to the standard test method, the same testing protocol can be applied to characterise protective clothing ensembles including underwear, air layers and certain design features[1]. In addition measurements on readymade garments are optionally possible.
NOTE The presently used evaluation methods are only validated for structural firefighting garments.
[1] A study conducted at Empa (Swiss Federal Laboratories for Materials Science and Technology, Switzerland) showed good correlation between results of standard torso tests (without both underwear and air layers on fabrics) to tests on fabrics with underwear, tests on fabrics with underwear and air layers and test on readymade garments (with underwear and with or without air layers) of the same material composition. Due to the different thermal insulation of the systems direct comparison of the results is not possible.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 18640-2:2018/Amd 1:2019 |
Protective clothing for firefighters — Physiological impact — Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters — Amendment 1 |
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/TR 19591:2018 |
Personal protective equipment for firefighters — Standard terms and definitions |
ISO/TR 19591:2018 contains a list of terms which are frequently used in the standardization of personal protective equipment worn by firefighters and definitions of these terms. The definitions are intended to support an unambiguous use of the terms listed.
|
Published |
2018-01 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
01.040.13
Environment. Health protection. Safety (Vocabularies)
;
13.340.10
Protective clothing
|
| ISO 19912:2019 |
Ships and marine technology — Servicing of immersion suits, anti-exposure suits and constant wear suits |
This document, in conjunction with ISO 18079-1, specifies provisions for servicing stations conducting servicing of immersion suits, anti-exposure suits and constant wear suits, including, but not limited to, those subject to IMO regulations, recommendations and guidelines.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.10
Protective clothing
;
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 19918:2017 |
Protective clothing — Protection against chemicals — Measurement of cumulative permeation of chemicals with low vapour pressure through materials |
ISO 19918 describes laboratory test methods to determine the resistance of materials, closures, and seams used in personal protective equipment (PPE) to permeation by solid or liquid chemicals with low vapour pressure (less than 133,322 Pa at 25 °C) and/or insolubility in water or other liquids commonly used as collection media. These chemicals that are often part of pesticide formulations and other mixtures cannot be measured using other standards for measuring permeation. This test method is suitable for field strength and concentrated pesticide formulations as well as other mixtures in which the active ingredient is a chemical with low vapour pressure and/or low solubility in commonly used liquid and gaseous collection media.
This test method is not intended to be used in place of standards such as ISO 6529, EN 16523-1 and ASTM F739, which measure permeation of chemicals that are either volatile or soluble in water or other liquids that do not interact with the material being tested. ISO 19918 is not suitable for measurement of volatile chemicals that may evaporate before the chemical analysis is complete.
The degree of contamination depends on numerous factors, such as type of exposure, application technique, and chemical formulation. As the level of exposure can vary considerably, this method is designed to rate relative performance of PPE materials for different durations.
This method is designed to measure cumulative permeation. Breakthrough time cannot be measured by this method. This test method does not measure resistance to penetration or degradation.
The test method standard may be used for the evaluation of PPE materials that are new or those for which the product standard requires treatment, such as laundering or simulated abrasion. Details of the treatment shall be reported.
|
Published |
2017-09 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 19918:2017/Amd 1:2021 |
Protective clothing — Protection against chemicals — Measurement of cumulative permeation of chemicals with low vapour pressure through materials — Amendment 1: Extraction and chemical analysis |
|
Published |
2021-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 20471:2013 |
High visibility clothing — Test methods and requirements |
ISO 20471:2013 specifies requirements for high visibility clothing which is capable of visually signalling the user's presence. The high visibility clothing is intended to provide conspicuity of the wearer in any light condition when viewed by operators of vehicles or other mechanized equipment during daylight conditions and under illumination of headlights in the dark.
Performance requirements are included for colour and retroreflection as well as for the minimum areas and for the placement of the materials in protective clothing.
|
Published |
2013-03 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 20471:2013/Amd 1:2016 |
High visibility clothing — Test methods and requirements — Amendment 1 |
|
Published |
2016-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/DIS 24588 |
Protective clothing — Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents — Classification, performance requirements and test methods |
|
Under development |
|
Edition : 1 |
Number of pages : 45 |
Technical Committee |
13.280
Radiation protection
;
13.340.10
Protective clothing
|
| ISO/TR 21808:2009 |
Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters |
ISO/TR 21808:2009 sets out guidance for the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters while carrying out their duties.
The PPE covered in ISO/TR 21808:2009 is intended for firefighting personnel exposed to risks associated with, but not necessarily limited to, the following activities:
structural firefighting;
wildland firefighting;
incidents involving hazardous materials;
incidents involving motor vehicles;
urban search and rescue;
swift water rescue;
emergency medical response;
storm and flood recovery.
The purpose of ISO/TR 21808:2009 is to highlight the main areas that an organization needs to consider when providing PPE to its members. Most paragraphs of the document contain bullet lists; these lists are provided for guidance only and they are not exhaustive.
|
Withdrawn |
2009-11 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/TR 21808:2021 |
Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters |
This document sets out guidance for the selection, use, care and maintenance of PPE designed to provide protection for firefighters while carrying out their duties.
The PPE covered in this document is intended for firefighting personnel exposed to risks associated with but not necessarily limited to the following activities:
— structural firefighting;
— wildland firefighting;
— incidents involving hazardous materials;
— incidents involving motor vehicle;
— urban search and rescue.
The purpose of this document is to highlight the main areas that a Fire service needs to consider when providing PPE to its members. This document is a supplement to the information provided in the PPE standards or used in conjunction with them. Most paragraphs of the document contain bulletlists, these lists are provided for guidance only and they are not exhaustive.
|
Published |
2021-02 |
Edition : 2 |
Number of pages : 80 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 21942:2019 |
Station uniform for firefighters |
This document sets out minimum performance requirements for station uniforms for firefighters that are provided by agencies to be worn under primary protective garments compliant with the relevant standards.
NOTE A station uniform, as defined by this document, is understood to not be a formal uniform or parade uniform, which are not likely to be worn under primary protective firefighting garments.
Garments developed in accordance with this document complement the performance built into primary protection firefighting garments in terms of minimising impact on hindrance, metabolic heat and comfort.
This document specifies two levels of requirements for station uniforms:
— Level 1 specifies minimum no melting nor dripping requirements that provide no additional protection but ensure the firefighter is not harmed by the melting of station uniform materials in cases where heat or flames impinge the station uniform.
— Level 2 specifies heat and flame requirements to provide minimum protection. It can be combined with additional layers or garments to meet the requirements of a standard for a specific primary protection garment, this combination should provide improved protection and comfort.
|
Published |
2019-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 21942:2019/CD Amd 1 |
Station uniform for firefighters — Amendment 1 |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.340.10
Protective clothing
|
| ISO 22488:2011 |
Ships and marine technology — Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet) |
ISO 22488:2011 specifies the protective clothing, gloves, boots and helmet to be used by ships' crews in fighting fires on board ships. These outfits are appropriate for the fighting of small- to medium-magnitude fires, before the operation of any installed fixed fire-fighting systems, and are not intended or suitable for entry into flames.
|
Published |
2011-06 |
Edition : 1 |
Number of pages : 36 |
Technical Committee |
13.340.10
Protective clothing
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO 22608:2004 |
Protective clothing — Protection against liquid chemicals — Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials |
ISO 22608:2004 specifies a test method to measure repellency, retention and penetration of a known volume of liquid pesticide when applied to protective clothing material. No external hydrostatic or mechanical pressure is applied to the test specimen during or after the application of the liquid pesticide.
The degree of contamination depends on numerous factors such as type of exposure, application technique, and pesticide formulation. As the level of exposure can vary considerably, this method is designed to rate relative performance of personal protective equipment (PPE) materials at two levels of contamination. Low level of contamination is achieved by applying 0,1 ml liquid formulation and high level by applying 0,2 ml.
This test method does not measure resistance to permeation or degradation.
This test method is suitable for field strength and concentrated pesticide formulations. This method may not be suitable for testing protective clothing materials against volatile pesticides formulations.
ISO 22608:2004 is applicable to the evaluation of materials that are new or those that have undergone treatment such as laundering, or simulated abrasion. Details of the treatment shall be reported. This test method can also be used to determine the resistance provided by protective clothing materials against penetration of new pesticide formulations.
|
Withdrawn |
2004-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 17695:2004 |
Footwear — Test methods for uppers — Deformability |
ISO 17695:2004 specifies a test method for determining deformability of uppers or complete upper assemblies, irrespective of the material used, in order to assess suitability for end use.
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 22608:2021 |
Protective clothing — Protection against liquid chemicals — Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials |
This document specifies a test method to measure the repellency, retention and penetration of a known volume of liquid pesticide when applied to a protective clothing material. No external hydrostatic or mechanical pressure is applied to the test specimen during or after the application of the liquid pesticide.
The degree of contamination depends on numerous factors such as the type of exposure, application technique, and pesticide formulation. As the level of exposure can vary considerably, this method is designed to rate the relative performance of personal protective equipment (PPE) materials at two levels of contamination. Low level of contamination is achieved by applying 0,1 ml of liquid formulation and high level by applying 0,2 ml.
This test method does not measure the resistance to permeation or degradation.
This test method is suitable for field strength and concentrated pesticide formulations. This method may not be suitable for testing protective clothing materials against volatile pesticide formulations.
This document is applicable to the evaluation of materials that are new or those that have undergone treatment such as laundering or simulated abrasion. Details of the treatment shall be reported. This test method can also be used to determine the resistance provided by protective clothing materials against penetration of new pesticide formulations.
|
Published |
2021-03 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 22609:2004 |
Clothing for protection against infectious agents — Medical face masks — Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected) |
ISO 22609:2004 describes a laboratory test method for measuring the
resistance of medical face masks to penetration by a splash of synthetic
blood.
ISO 22609:2004 primarily addresses the performance of materials or certain
material constructions used in medical face masks. The test method does not
address the performance of the medical face mask's design, construction,
interfaces or other factors which may affect the overall protection offered by
the medical face mask and its operation (such as filtration efficiency and
pressure drop).
ISO 22609:2004 does not evaluate the performance of medical face masks as a
protection against contamination via airborne exposure pathways or in the
prevention of the penetration of aerosolized body fluids deposited on the
medical face mask.
|
Published |
2004-12 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
11.140
Hospital equipment
;
13.340.10
Protective clothing
|
| ISO 22610:2006 |
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment — Test method to determine the resistance to wet bacterial penetration |
ISO 22610:2006 specifies a test method, with associated test apparatus, which is used to determine the resistance of a material to the penetration of bacteria, carried by a liquid, when subjected to mechanical rubbing.
|
Withdrawn |
2006-07 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 22610:2018 |
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment — Test method to determine the resistance to wet bacterial penetration |
This document specifies a test method, with associated test apparatus, which is used to determine the resistance of a material to the penetration of bacteria, carried by a liquid, when subjected to mechanical rubbing.
|
Published |
2018-09 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
11.140
Hospital equipment
;
13.340.10
Protective clothing
|
| ISO 22612:2005 |
Clothing for protection against infectious agents — Test method for resistance to dry microbial penetration |
ISO 22612:2005 specifies a test method for assessing the resistance to penetration through barrier materials of bacteria-carrying particles.
Due to its complexity, this ISO 22612:2005 cannot be considered as a useful method for routine quality control but may suit the needs when a material is assessed for compliance with the requirements of current regulations such as EU Directive 93/42/EEC.
|
Published |
2005-03 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 23616:2022 |
Cleaning, inspection and repair of firefighters' personal protective equipment (PPE) |
This document gives requirements, guidance and recommendations for the cleaning, inspection, and repair of PPE for use by firefighters.
This document is intended to be used by those responsible for the cleaning, inspections, and repair of firefighters PPE, however, it will also provide vital guidance to those who are responsible for establishing such a programme including fire and rescue services.
This document does not cover the following at this time:
a) chemical protective clothing;
b) garments required for protection against chemical, biological, radiological and nuclear (CBRN) materials.
|
Published |
2022-04 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO/DIS 23616 |
Cleaning, inspection and repair of firefighters' personal protective equipment (PPE) |
This document gives requirements, guidance and recommendations for the cleaning, inspection, and repair of PPE for use by firefighters.
This document is intended to be used by those responsible for the cleaning, inspections, and repair of firefighters PPE, however, it will also provide vital guidance to those who are responsible for establishing such a programme including fire and rescue services.
This document does not cover the following at this time:
a) chemical protective clothing;
b) garments required for protection against chemical, biological, radiological and nuclear (CBRN) materials.
|
Under development |
|
Edition : 2 |
Number of pages : 36 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 27065:2011 |
Protective clothing — Performance requirements for protective clothing worn by operators applying liquid pesticides |
ISO 27065:2011 establishes minimum performance, classification, and labelling requirements for protective clothing worn by operators applying liquid pesticide products diluted in water. Protective clothing covered by ISO 27065:2011 includes, but is not limited to, shirts, jackets, trousers, coveralls, and spray-tight or liquid-tight garments. ISO 27065:2011 addresses protection provided by protective accessories, with the exception of those used for the protection of the head, hands, and feet. ISO 27065:2011 does not address protection against biocides, fumigants or highly volatile liquids.
|
Withdrawn |
2011-04 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 27065:2017 |
Protective clothing — Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers |
ISO 27065 establishes minimum performance, classification, and marking requirements for protective clothing worn by operators handling pesticide products as well as re-entry workers. For the purpose of ISO 27065, the term pesticide applies to insecticides, herbicides, fungicides, and other substances applied in liquid form that are intended to prevent, destroy, repel, or reduce any pest or weeds in agricultural settings, green spaces, roadsides, etc. It does not include biocidal products used for agricultural and non-agricultural settings.
Pesticide handling includes mixing and loading, application, and other activities such as cleaning contaminated equipment and containers. Concentrated pesticides are typically handled during mixing and loading. Protective clothing covered by ISO 27065includes, but is not limited to, shirts, jackets, trousers, coveralls, aprons, protective sleeves, caps/hats and other headwear (excluding hard hats made of rigid materials, e.g. hats worn by construction workers), and accessories used under knapsack/backpack sprayers.
ISO 27065 does not address items used for the protection of the respiratory tract, hands, and feet. ISO 27065 does not address protection against fumigants.
|
Published |
2017-09 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 27065:2017/Amd 1:2019 |
Protective clothing — Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers — Amendment 1: Surrogate test chemical |
|
Published |
2019-10 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
13.340.10
Protective clothing
|
| ISO 4417:1977 |
Size designation of clothes — Headwear |
Establishes a system of designating the size of headwear based on body and not garment measurements. Specifies the control dimensions (headgirth), the size designation and the labelling.
|
Withdrawn |
1977-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
61.020
Clothes
;
61.040
Headgear. Clothing accessories. Fastening of clothing
|
| ISO 4418:1978 |
Size designation of clothes — Gloves |
The size designation system is based on body and not garment measurements. Both the control dimensions on which the size designation is based, and the method of indicating the size designation on a garment label, are laid down. Should be read in conjunction with ISO 3635
|
Withdrawn |
1978-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
61.020
Clothes
;
61.040
Headgear. Clothing accessories. Fastening of clothing
|
| ISO/R 1511:1970 |
Protective helmets for road users |
|
Withdrawn |
1970-06 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 3873:1977 |
Industrial safety helmets |
Specifies physical and performance requirements, methods of test and marking requirements. The mandatory requirements apply to helmets for general use in industry. Additional optional performance requirements are included: Shock absorption, penetration, flammability, electrical insulation, and lateral rigidity.
|
Published |
1977-03 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4007:1977 |
Personal eye-protectors — Vocabulary |
Defines the principal terms used. These terms and their definitions conform to ISO 31/VI and CIE Publication 17. It states in the annex the spectral distribution of solar radiation energy (in the infra-red spectrum). This annex is not an integral part of the standard.
|
Withdrawn |
1977-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.040.13
Environment. Health protection. Safety (Vocabularies)
;
13.340.20
Head protective equipment
|
| ISO 4007:2012 |
Personal protective equipment — Eye and face protection — Vocabulary |
ISO 4007:2012 defines and explains the principal terms used in the field of personal eye and face protection.
|
Withdrawn |
2012-05 |
Edition : 2 |
Number of pages : 110 |
Technical Committee |
01.040.13
Environment. Health protection. Safety (Vocabularies)
;
13.340.20
Head protective equipment
|
| ISO 4007:2018 |
Personal protective equipment — Eye and face protection — Vocabulary |
This document defines and explains the principal terms used in the field of personal eye and face protection.
|
Published |
2018-10 |
Edition : 3 |
Number of pages : 74 |
Technical Committee |
01.040.13
Environment. Health protection. Safety (Vocabularies)
;
13.340.20
Head protective equipment
|
| ISO 4849:1981 |
Personal eye-protectors — Specifications |
Deals with general considerations, such as: designation, classification, requirements applicable to all types, some particular requirements, sampling, identification. The transmittance requirements and methods of test for particular uses are given in the International Standards listed in clause 3. Gives functional requirements for the various types used mainly in industry. Applies to all types used against various hazards which are likely to damage the eye or impair vision, with the exception of nuclear radiation, X-rays, laser beams and low-temperature infrared radiation.
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4850:1979 |
Personal eye-protectors for welding and related techniques — Filters — Utilisation and transmittance requirements |
Specifies the numbering of and transmittance requirements for filters intended to protect operatives performing manual work involving welding, braze welding, arc gouging and thermal cutting. It also gives guidance on the selection and use of these filters. Optical test methods are the subject of ISO 4854. Non-optical test methods are the subject of ISO 4855.
|
Withdrawn |
1979-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4851:1979 |
Personal eye-protectors — Ultra-violet filters — Utilisation and transmittance requirements |
Gives the numbering of and transmittance requirements for filters. It defines guidance and their selection and use. Optical test methods form the subject of ISO 4854. Non-optical test methods form the subject of ISO 4855. The symbol for filters includes a code number and the shade number corresponding to the filter. The determination of transmittance is described in clause 5 of ISO 4854.
|
Withdrawn |
1979-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4852:1978 |
Personal eye-protectors — Infra-red filters — Utilisation and transmittance requirements |
Gives the numbering of and transmittance requirements for filters. It also defines guidance on their selection and use. Optical test methods form subject of ISO 4854. Non-optical test methods form the subject of ISO 4855. The symbol for filters includes a code number of transmittance is described in clause 5 of ISO 4854.
|
Withdrawn |
1978-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4854:1981 |
Personal eye-protectors — Optical test methods |
Specifies the optical test methods the requirements for which are given in ISO 4849 to ISO 4853. The other test methods are given in ISO 4855. The following tests are described: test for refractive, astigmatic and prismatic powers, diffusion test, test for quality of material and surface, determination of transmittance. Annex A describes testing of unmounted oculars. Annexes B and C describe two other optional methods for prismatic power measurement.
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4855:1981 |
Personal eye-protectors — Non-optical test methods |
Specifies the optical test methods the requirements for which are given in ISO 4849 to ISO 4853. The other test methods are given in ISO 4855. The following tests are described: test for robustness of the protectors, test for stability at elevated temperature, test for resistance to ultraviolet radiation, test for ignition, test for resistance to corrosion, test for suitability for disinfection, test for resistance to high-speed particles, test for non-adherence of molten metal, test for resistance to penetration of hot solids, test for proof against chemical droplets, test for protection against dust, and test for protection against gas.
|
Withdrawn |
1981-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4856:1982 |
Personal eye-protectors — Synoptic tables of requirements for oculars and eye-protectors |
Provides a survey of the requirements which have to be met by the various types as well as by the combination on them with the exception of filters as protectors against laser radiation, specifications of which are given in ISO 6161. Requirements to be met by the different types of oculars are given in table 1, requirements for frames and mounted oculars are given in table 2.
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-1:1990 |
Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation |
Specifies a method for measuring sound attenuation at the threshold of hearing. The procedure is designed to yield values close to the maximum attenuation which are not normally attained under field conditions. The values reflect the attenuating characteristics only to the extent that users wear the device in the same manner as did the test subjects. Data are collected at low sound pressure levels but which are also representative of the values at higher sound pressure levels.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/CD 11999-9 |
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 9: Fire hoods |
ISO 11999-9:2016 specifies the minimum design and performance requirements for a fire hood as part of personal protective equipment (PPE) to be used by firefighters, primarily but not solely to protect against exposure to flame and high thermal loads.
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-1:2018 |
Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation |
This document specifies a subjective method for measuring sound attenuation of hearing protectors at the threshold of hearing. The method is a laboratory method designed to yield reproducible values under controlled measurement conditions. The values reflect the attenuating characteristics of the hearing protector only to the extent that users wear the device in the same manner as did the test subjects.
For a more representative indication of field performance the methods of ISO/TS 4869‑5 can be used.
This test method yields data which are collected at low sound pressure levels (close to the threshold of hearing) but which are also representative of the attenuation values of hearing protectors at higher sound pressure levels. An exception occurs in the case of amplitude-sensitive hearing protectors for sound pressure levels above the point at which their level-dependent characteristics become effective. At those sound pressure levels the method specified in this document is inapplicable, as it will usually underestimate sound attenuation for these devices.
NOTE Due to masking from physiological noise in the occluded ear tests, sound attenuations below 500 Hz can be overestimated by a few decibels.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-2:1994 |
Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
Describes three methods (the octave-band, HML and SNR methods) for estimating the A-weighted sound pressure levels effective when hearing protectors are worn. The methods are applicable to either the sound pressure level or the equivalent continuous sound pressure level of the noise. Although primarily intended for steady noise exposures, the methods are also applicable to noises containing impulsive components. They are not suitable for use with peak sound pressure level measurements.
|
Withdrawn |
1994-08 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-2:1994/Cor 1:2006 |
Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn — Technical Corrigendum 1 |
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-2:2018 |
Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
This document specifies three methods (the octave-band, HML and SNR methods) of estimating the A-weighted sound pressure levels effective when hearing protectors are worn. The methods are applicable to either the sound pressure level or the equivalent continuous sound pressure level of the noise. Although primarily intended for steady noise exposures, the methods are also applicable to noises containing impulsive components. It is possible that these methods could not be suitable for use with peak sound pressure level measurements.
The octave-band, H, M, L or SNR values are suitable for establishing sound attenuation criteria for selecting or comparing hearing protectors, and/or setting minimum acceptable sound attenuation requirements.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-3:2007 |
Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
ISO 4869-3:2007 specifies a method for measuring the insertion loss of ear-muff type hearing protectors using an acoustic test fixture. The method is applicable to the investigation of production spreads of performance as part of type approval or certification procedures, and to the investigation of the change of performance with age. It is intended to ensure that ear-muff hearing protector samples submitted for subjective testing of attenuation according to ISO 4869-1 have performances typical of the type.
The method specified in ISO 4869-3:2007 is not applicable as the basic test for type approval. Performance data obtained by this method are not intended to be quoted as representing the real-ear sound attenuation of an ear-muff, nor the protection provided by the ear-muff.
|
Published |
2007-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/TR 4869-3:1989 |
Acoustics — Hearing protectors — Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes |
The procedure specified may be used to investigate production spreads of performance as part of type approval or certification procedures and the change of performance with age. It is not intended to be used as the basic test for type approval purposes. Performance data obtained are not to be quoted as representing the real-ear sound attenuation of an ear-muff, nor the protection provided by the ear-muff.
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/TR 4869-4:1998 |
Acoustics — Hearing protectors — Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs |
|
Withdrawn |
1998-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12311:2013 |
Personal protective equipment — Test methods for sunglasses and related eyewear |
ISO 12311:2012 specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.
Other test methods may be used if shown to be equivalent.
|
Published |
2013-08 |
Edition : 1 |
Number of pages : 85 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/TS 4869-5:2006 |
Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects |
ISO/TS 4869-5:2006 specifies a method for measuring noise reduction of passive hearing protectors at the threshold of hearing. The method is designed to provide estimates of the noise reduction obtained by typical groups of users in real-world occupational settings, who may lack the training and motivation to wear hearing protectors in an optimum manner.
The principle of the test method is to measure the difference in hearing threshold with and without wearing a hearing protector. This difference between the thresholds constitutes the noise reduction. The measurement is done twice on a given number of test subjects.
This test method yields data that are collected at low sound pressure levels (close to the threshold of hearing), but which are also representative of the noise reduction values of hearing protectors at higher sound pressure levels. ISO/TS 4869-5:2006 is inapplicable for level-dependent hearing protectors for sound pressure levels above the point at which their level-dependent characteristics become effective.
|
Published |
2006-10 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-6:2019 |
Acoustics — Hearing protectors — Part 6: Determination of sound attenuation of active noise reduction earmuffs |
This document is concerned with active noise reduction (ANR) earmuffs. It specifies the test methods for the determination of the active insertion loss and calculation procedures for deriving the total attenuation. For this aim, the values of sound attenuation in the passive mode also have to be known and are determined according to ISO 4869‑1. These methods are intended for steady noise exposures and are not applicable to noises containing impulsive components.
The test methods account for the acoustical interaction between the wearer and the device using measurements of passive (REAT) and active microphone-in-real-ear (MIRE) measurements as specified in ISO 4869‑1 and ISO 11904‑1, respectively.
|
Published |
2019-02 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869:1981 |
Acoustics — Measurement of sound attenuation of hearing protectors — Subjective method |
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 6161:1981 |
Personal eye-protectors — Filters and eye-protectors against laser radiation |
Specifies requirements for spectacle filters and protectors within the spectral region 0,2 to 1000 micron. The work, which was staggered over several years, represents a basic study for which a majority consensus was reached at the international level. To take account of new developments and knowledge relating to lasers a revision of this standard will be undertaken.
|
Withdrawn |
1981-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.20
Head protective equipment
|