| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4618:2014 |
Paints and varnishes — Terms and definitions |
ISO 4618:2014 defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes). Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders.
Terms and definitions from ISO 4618:2014 can be viewed free of charge on the ISO online browsing platform (OBP): https://www.iso.org/obp/ui/
|
Withdrawn |
2014-10 |
Edition : 2 |
Number of pages : 125 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4618:2023 |
Paints and varnishes — Vocabulary |
This document defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes).
Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, including corrosion protection (see the ISO 12944 series), coating powders (see ISO 8130-14), electro-deposition coatings (see ISO 22553-1) and rheology (see ISO 3219-1).
Terms on nanotechnologies are harmonized with the ISO 80004 series.
Terms on pigments and extenders are harmonized with ISO 18451-1.
|
Published |
2023-02 |
Edition : 3 |
Number of pages : 39 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4622:1980 |
Paints and varnishes — Pressure test for stackability |
|
Withdrawn |
1980-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4622:1992 |
Paints and varnishes — Pressure test for stackability |
Specifies a test method for determining, under standard conditions, whether a single-coat film or a multi-coat system of paints after a specified drying period is sufficiently dry to resist damage when two painted surfaces or one painted surface and another surface are placed in contact under pressure. For any particular application, it needs to be completed by supplementary information.
|
Withdrawn |
1992-12 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-1:2000 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates |
|
Withdrawn |
2000-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-1:2018 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates |
This document describes a test procedure for assessing the protective action of coatings of paints or varnishes on steel against filiform corrosion arising from a scribed mark cut through the coating.
It is only suitable for assessing the performance of the coating/substrate combination tested. It is not suitable for predicting the performance of the coating on different substrates.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-2:2003 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates |
ISO 4623-2:2003 describes a test procedure for assessing the protective action of coatings of paints or varnishes on aluminium against filiform corrosion arising from a scribe mark cut through the coating.
It is only suitable for assessing the performance of the coating/substrate combination tested. It is not suitable for predicting the performance of the coating on different substrates.
|
Withdrawn |
2003-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-2:2003/Cor 1:2005 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates — Technical Corrigendum 1 |
|
Withdrawn |
2005-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-2:2016 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates |
ISO 4623-2:2016 describes a test procedure for assessing the protective action of coatings of paints or varnishes on aluminium against filiform corrosion arising from a scribe mark cut through the coating.
It is only suitable for assessing the performance of the coating/substrate combination tested. It is not suitable for predicting the performance of the coating on different substrates.
|
Published |
2016-08 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623:1984 |
Paints and varnishes — Filiform corrosion test on steel |
|
Withdrawn |
1984-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4624:1978 |
Paints and varnishes — Pull-off test for adhesion |
Specifies a method for assessing the adhesion of a single coating or a multi-coat system of a coating material by measuring the minimum tensile stress necessary to detach or to rupture the coating in a direction perpendicular to the substrate. The test may be applied using a wide range of substrates. Different procedures are specified according to whether the substrate is deformable, for example sheet metal or plastics, or rigid, for example thick concrete. The result is the minimum tensile stress necessary to breack the weakest interface (adhesive failure) or the weakest component (cohesive failure).
|
Withdrawn |
1978-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4624:2002 |
Paints and varnishes — Pull-off test for adhesion |
This International Standard describes methods for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.
The test may be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, for example thin metal, plastics and wood, or rigid, for example thick concrete and metal plates. For special purposes, the coating may be applied directly to the face of a test dolly.
|
Withdrawn |
2002-02 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4624:2016 |
Paints and varnishes — Pull-off test for adhesion |
ISO 4624:2016 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.
The test may be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, for example thin metal, plastics and wood, or rigid, for example thick concrete and metal plates. To avoid distortion of the substrate during the tensile test, it is common to use a sandwich construction. For example, for special purposes, the coating may be applied directly to the face of a test dolly.
|
Published |
2016-03 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/FDIS 4624 |
Paints and varnishes — Pull-off test for adhesion |
ISO 4624:2016 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.
The test may be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, for example thin metal, plastics and wood, or rigid, for example thick concrete and metal plates. To avoid distortion of the substrate during the tensile test, it is common to use a sandwich construction. For example, for special purposes, the coating may be applied directly to the face of a test dolly.
|
Under development |
|
Edition : 4 |
Number of pages : 12 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4627:1981 |
Paints and varnishes — Evaluation of the compatibility of a product with a surface to be painted — Methods of test |
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-1:1978 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of quantity and size of common types of defect — Part 1: General principles and pictorial scales for blistering and rusting |
|
Withdrawn |
1978-07 |
Edition : 1 |
|
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-1:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 1: General principles and rating schemes |
Establishes a general system for designating the intensity, quantity and size of common types of defects and outlines the basic principles of the system in respect of designation of the intensity, quantity and size of defects. A uniform convention has been adopted for designating the intensity and quantity of defects: "o" denoting no defects, and "5" denoting defects so severe that further discrimination has no practical meaning. The schemes given in this document are intended to provide a system for describing, in a standard manner, test areas.
|
Withdrawn |
1982-05 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-1:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system |
ISO 4628-1:2003 defines a system for designating the quantity and size of defects and the intensity of changes in the appearance of coatings and outlines the general principles of the system used throughout ISO 4628. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
The other parts of ISO 4628 provide pictorial standards or other means of evaluating particular types of defect. As far as possible, already existing evaluation schemes have been used as the basis.
This part of ISO 4628 can also be used for assessing defects not covered by the other parts of ISO 4628.
|
Withdrawn |
2003-09 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-1:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system |
ISO 4628-1:2016 defines a system for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system used throughout ISO 4628. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes, for example yellowing.
The other parts of ISO 4628 provide pictorial standards or other means for evaluating particular types of defect. As far as possible, already existing evaluation schemes have been used as the basis.
ISO 4628-1:2016 is also used for assessing defects not covered by the other parts of ISO 4628.
|
Published |
2016-01 |
Edition : 4 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-2:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 2: Designation of degree of blistering |
This document provides pictorial standards for designating the degree of blistering. The principle of the method consists in rating the density and size of the blisters by means of the pictorial standards. The photographic reference standards have been adopted from ASTM D 714-56. Replaces and cancels section two of ISO 4628/1-1978.
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-2:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering |
ISO 4628-2:2003 describes a method for assessing the degree of blistering of coatings by comparison with pictorial standards.
NOTE The pictorial standards have been adopted from ASTM D 714, Standard Test Method for Evaluating Degree of Blistering of Paints. The correlation between the ISO and ASTM rating systems is shown in an annex.
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-2:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering |
ISO 4628-2:2016 specifies a method for assessing the degree of blistering of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 illustrate blisters in the sizes 2, 3, 4, and 5, and each size in the quantities (densities) 2, 3, 4, and 5.
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2016-01 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-3:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 3: Designation of degree of rusting |
This document provides pictorial standards for designating the degree of rusting. The standards given are basically indended for rating on coated steel. They may used for designating the degree of corrosion of non-ferrous metals if the form of breakdown is comparable with that on the standards. Cancels and replaces section three of ISO 4628/1-1978.
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-3:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
ISO 4628-3:2003 describes a method for assessing the degree of rusting of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.
NOTE 1 The pictorial standards have been selected from the European rust scale published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the European rust scale is given in an annex.
NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610, Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces, is also given in an annex.
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-5:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
ISO 4628-5:2016 specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards.
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Withdrawn |
2016-01 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7254:1984 |
Paints and varnishes — Assessment of natural spreading rate — Brush application |
|
Withdrawn |
1984-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-3:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.
NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1.
NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610 is given in Annex B, Table B.2.
NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 8501‑1 (rust grades A, B, C, and D).
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2016-01 |
Edition : 3 |
Number of pages : 15 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/CD 4628-3 |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.
NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1.
NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610 is given in Annex B, Table B.2.
NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 8501‑1 (rust grades A, B, C, and D).
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-4:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 4: Designation of degree of cracking |
Provides pictorial standards for designating. The quantity of cracking is rated by reference to table 2 of ISO 4628/1 and using as examples figures 1 or 2, depending on the type of cracking. The average size of the cracks is designated according to the classification.
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-4:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking |
ISO 4628-4:2003 describes a method for assessing the degree of cracking of coatings by comparison with pictorial standards, using the designation system defined in ISO 4628-1.
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-4:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking |
ISO 4628-4:2016 specifies a method for assessing the degree of cracking of coatings by comparison with pictorial standards.
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2016-01 |
Edition : 3 |
Number of pages : 15 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-5:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 5: Designation of degree of flaking |
Provides pictorial standards for rating of flaking. The quantity of damage is rated on the basis of the relative area flaked, by reference to table 1 and using the figures 1 and 2 as examples.
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-5:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
ISO 4628-5:2003 describes a method for assessing the degree of flaking of coatings by comparison with pictorial standards, using the designation system defined in ISO 4628-1.
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 14688-1:2002/Amd 1:2013 |
Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description — Amendment 1 |
|
Withdrawn |
2013-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
93.020
Earthworks. Excavations. Foundation construction. Underground works
|
| ISO 4628-5:2022 |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
This document specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards.
ISO 4628-1 specifies the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings. It also outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2022-11 |
Edition : 4 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-6:1990 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 6: Rating of degree of chalking by tape method |
ISO 4628 is a series of standards dealing with the sampling and testing of paints, varnishes and related products. This part provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-6:2007 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
ISO 4628-6:2007 provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt, particularly when chalking is slight.
|
Withdrawn |
2007-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-6:2011 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
ISO 4628-6:2011 provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated.
|
Published |
2011-09 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/DIS 4628-6 |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
ISO 4628-6:2011 provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated.
|
Under development |
|
Edition : 4 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-7:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method |
ISO 4628-7:2003 describes a method suitable, in particular, for rating the degree of chalking on white or coloured exterior coatings and coating systems on rough surfaces (i.e. those having a roughness greater than segment 4 of reference comparator G as described in ISO 8503-1).
The test method specified may also be used for the assessment of the degree of chalking of coatings and coating systems on smooth surfaces, but the method specified in ISO 4628-6 is preferable for this purpose.
The test method is applicable to coatings and coating systems on mineral substrates, e.g. fibre cement, brick, concrete and renderings, independent of the structure of the surface. The method can be used quite effectively by experienced operators and is recommended for laboratory use as well as for on-site evaluation.
|
Withdrawn |
2003-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-7:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method |
ISO 4628-7:2016 specifies a method suitable, in particular, for rating the degree of chalking on white or coloured exterior coatings and coating systems on rough surfaces (i.e. those having a roughness greater than segment 4 of the reference comparator G as described in ISO 8503‑1).
The test method specified can also be used for the assessment of the degree of chalking of coatings and coating systems on smooth surfaces, but the method specified in ISO 4628‑6:2011 is preferable for this purpose.
The test method is applicable to coatings and coating systems on mineral substrates, e.g. fibre cement, brick, concrete, and renderings, independent of the structure of the surface. The method can be used quite effectively by experienced operators and is recommended for laboratory use as well as for on-site evaluation.
NOTE 1 When a reference to this test method is included in specifications, the test conditions (i.e. weathering method and substrate) have to be agreed between the interested parties.
NOTE 2 The method described in this part of ISO 4628 is a relative ranking method and is therefore not suitable for use in agreements between parties. See, however, the Note to Table 1.
NOTE 3 Refer to ISO 4628‑1 for the designation system for quantity and size of defects and the intensity of changes in appearance of coatings, as well as general principles of the system.
|
Published |
2016-01 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-8:2005 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe |
ISO 4628-8:2005 specifies a method for assessing delamination and corrosion, caused by a corrosive environment, around a scribe in a coating on a test panel or other test specimen.
|
Withdrawn |
2005-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-8:2012 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
ISO 4628-8:2012 specifies a method for assessing delamination and corrosion around a scribe or other artificial defect on a coated panel or other coated test specimen, caused by a corrosive environment.
ISO 4628-8:2012 does not cover evaluation of pitting corrosion or pit depth.
|
Published |
2012-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-10:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
ISO 4628-10:2003 describes a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of the filaments.
Pictorial examples are provided in an annex to illustrate different ratings for the length of the longest filament L and the most frequent filament length M.
|
Withdrawn |
2003-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-10:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
ISO 4628-10:2016 specifies a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of filaments.
Pictorial examples provided in Annex A of this part of ISO 4628 illustrate different ratings for the length of the longest filament L and the most frequent length M of the filaments. A comparison of the test panels with the 12 pictures in Annex A does not supersede the obligatory numerical assessment (method 1 or 2).
ISO 4628-1 defines a system used for designating the quantity and size of defects and the intensity of uniform changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2016-01 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/DIS 4628-10 |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
ISO 4628-10:2016 specifies a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of filaments.
Pictorial examples provided in Annex A of this part of ISO 4628 illustrate different ratings for the length of the longest filament L and the most frequent length M of the filaments. A comparison of the test panels with the 12 pictures in Annex A does not supersede the obligatory numerical assessment (method 1 or 2).
ISO 4628-1 defines a system used for designating the quantity and size of defects and the intensity of uniform changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Under development |
|
Edition : 3 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TR 5601:2023 |
Paints and varnishes — Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content — Best practices for the selection of test methods |
This document aims to enable users to identify an appropriate method for the determination of volatile organic compounds (VOC) content and/or the semi-volatile organic compounds (SVOC) content of coating materials and their raw materials. This document provides a step-by-step procedure for identifying appropriate tests. This document is intended to be used in conjunction with ISO 11890-1, ISO 11890-2 and ISO 17895, to help users select an appropriate analytical method for their analytical problem.
|
Published |
2023-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TR 5602:2021 |
Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials |
This document describes the main sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials. The sources of error listed here include all process steps from the set-up of the sample with the measuring cell right through to evaluation.
NOTE The sources of error discussed here do not represent a complete list.
|
Published |
2021-11 |
Edition : 1 |
Number of pages : 52 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-1:1998 |
Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-1:2017 |
Paints and varnishes — Determination of resistance to humidity — Part 1: Condensation (single-sided exposure) |
ISO 6270-1:2017 specifies a method for determining the resistance of paint films, paint systems and related products to conditions of condensation in accordance with the requirements of coating or product specifications.
The method is applicable to coatings, both on porous substrates such as wood, plaster and plasterboard and on non-porous substrates such as metal. It provides an indication of the performance likely to be obtained under severe conditions of exposure where continuous condensation occurs on the surface.
The procedure can reveal failures of the coating (including blistering, staining, softening, wrinkling and embrittlement) and deterioration of the substrate.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered by this document.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-2:2005 |
Paints and varnishes — Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres |
ISO 6270-2:2005 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible.
It does not cover the shape and preparation of the test specimens, the duration of the test or the assessment of the test results.
|
Withdrawn |
2005-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-2:2017 |
Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir) |
ISO 6270-2:2017 specifies the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered in this document.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-3:2018 |
Paints and varnishes — Determination of resistance to humidity — Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir) |
ISO 6270-3:2018 specifies the general conditions and procedures to be observed when testing coated test specimens in constant condensation water atmospheres in order to ensure that the results of tests carried out in different laboratories are reproducible.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered in this document.
|
Published |
2018-01 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270:1980 |
Paints and varnishes — Determination of resistance to humidity (continuous condensation) |
|
Withdrawn |
1980-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272-1:2002 |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
ISO 6272-1:2002 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions.
The method described can be applied
either as a pass/fail test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification;or as a classification test, to determine the minimum mass and/or drop height for which the coating cracks or peels from its substrate by gradually increasing the drop height and/or the mass.
|
Withdrawn |
2002-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272-1:2011 |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
ISO 6272-1:2011 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions.
NOTE The terms "impact" and "impact resistance" are used in the title and text of ISO 6272-1, but an important characteristic of the apparatus used is that it should produce rapid deformation rather than a true impact.
The method described can be applied
either as a pass/fail test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification;
or as a classification test, to determine, by gradually increasing the drop height and/or the mass, the minimum mass and/or drop height for which the coating cracks or peels from its substrate.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272-2:2002 |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
ISO 6272-2:2002 describes a method for rapidly deforming, by impact with a spherical indenter of diameter 12,7 mm or 15,9 mm, a coating film and its substrate and evaluating the effect of such deformation.
|
Withdrawn |
2002-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272-2:2011 |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
ISO 6272-2:2011 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, dropped under standard conditions, acting on a small-area spherical indenter.
NOTE The terms "impact" and "impact resistance" are used in the title and text of ISO 6272-2, but an important characteristic of the apparatus used is that it should produce rapid deformation rather than a true impact.
Because of the poor reproducibility of this test method, the method should be restricted to testing in only one laboratory when the results are expressed as numerical values. Interlaboratory agreement is improved when ranking is used in place of numerical values.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272:1993 |
Paints and varnishes — Falling-weight test |
Specifies a test method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, dropped under standard conditions.
|
Withdrawn |
1993-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TR 6272:1979 |
Paints and varnishes — Falling weight test |
|
Withdrawn |
1979-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6441-1:1999 |
Paints and varnishes — Determination of micro-indentation hardness — Part 1: Knoop hardness by measurement of indentation length |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6441-2:1999 |
Paints and varnishes — Determination of micro-indentation hardness — Part 2: Knoop hardness by measurement of indentation depth under load |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6441:1984 |
Paints and varnishes — Indentation test (spherical or pyramidal) |
The test method is applicable on a single or multi-coat system. The result is expressed as the depth of indentation produced when an indentor of specified or between the interested parties agreed size and shape is applied to the coating under defined conditions. The method is applicable if the identation does not exceed approximately 10 % of the total coating thickness. The indentation apparatus shall be constructed so that the contact load and the test load can successively be applied to an indentor.
|
Withdrawn |
1984-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6503:1984 |
Paints and varnishes — Determination of total lead — Flame atomic absorption spectrometric method |
The method is principle to coating materials having lead contents in the range of about 0,01 % (m/m) to 2 % (m/m), may also be applicable to products with a total lead content of more than 2 % (m/m) when the requirements of precision does not exceed the specified values. two methods are given. The principle of the dry ashing method consists in evaporation of a test portion to dryness and ashing at 475 C and extraction of any lead in the residue with hydrochloric acid; that of the wet oxidation method consists in wet oxidation of a test portion with a mixture of sulfuric acid and hydrogen peroxide or with sulfuric acid and nitric acid and extraction of any lead in the residue with EDTA and ammonia solution.
|
Published |
1984-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-1:1983 |
Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints |
Specifies a method to be used for determining the spreading rate necessary to give a contrast ratio of 98 % of coating materials. The method is restricted to paint films having the tri-stimulus value of Y 70; it is not applicable to fluorescent or metallic paint materials. The principle of the method is based on the Kubelka and Munk equations relating the scattering and absorption coefficients of pigmented films to their colour and opacity. For the determination of hiding power, both the reflectance of a film of thickness, t, on a black background and the reflectivity are required.
|
Withdrawn |
1983-05 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-1:2019 |
Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints |
This document specifies a method for determining the hiding power (spreading rate necessary to give a hiding power of 98 %) of white or light-coloured paints. It is applicable to paint films having the tri-stimulus value of Y ≥ 70 and hiding power > 80 %. It is not applicable to fluorescent or metallic paints.
|
Published |
2019-05 |
Edition : 2 |
Number of pages : 36 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-3:1998 |
Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6392-1:1996 |
Earth-moving machinery — Lubrication fittings — Part 1: Nipple type |
Describes nipple-type lubrication fittings for the types of earth-moving machinery defined in ISO 6165.
|
Published |
1996-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6504-3:2006 |
Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
ISO 6504-3:2006 describes methods for determining the opacity (by contrast ratio measurement) given by paint films of white or light colours of tristimulus value Y greater than 25, applied at a spreading rate of 20 m2/l to a black and white chart or to colourless transparent polyester foil. In the latter case, the tristimulus value Y is measured subsequently over black and white glass panels.
|
Withdrawn |
2006-02 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-3:2019 |
Paints and varnishes — Determination of hiding power — Part 3: Determination of hiding power of paints for masonry, concrete and interior use |
This document specifies methods for determining the hiding power given by paint coats of white or light colours of tristimulus values Y and Y10 greater than 25, applied to a black and white chart, or to a colourless transparent foil. In the latter case the tristimulus values Y and Y10 are measured over black and white panels. Subsequently, the hiding power is calculated from these tristimulus values.
This document also specifies a simple method for calculating the spreading rate for paints with a volatile matter content with low evaporation speed, e.g. coatings for interior walls and ceilings as specified in EN 13300.
|
Published |
2019-11 |
Edition : 3 |
Number of pages : 22 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6713:1980 |
Paints and varnishes — Preparation of acid extracts from liquid paints |
|
Withdrawn |
1980-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6713:1984 |
Paints and varnishes — Preparation of acid extracts from paints in liquid or powder form |
The principle of the method consists in the dilution of a sample with a suitable solvent, separation of the pigment by centrifugation. Three methods, dependent on the binder of the product being examined, are described. Extraction of the separated pigment with hydrochloric acid at a ratio of mass:volume of 1:15, except for the determination of "soluble" lead; in that case, extraction is carried out at a ratio of 1:1000. Evaporation to dryness of the liquid portion obtained by centrifuging, analysis by dry ashing and extraction of the ash with nitric acid. For coating materials in powder form, extraction is carried out without prior separation of the binder.
|
Published |
1984-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6714:1990 |
Paints and varnishes — Preparation of acid extracts from dried paint films |
|
Withdrawn |
1990-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6860:1984 |
Paints and varnishes — Bend test (conical mandrel) |
Is one of four documents which specify empirical test procedures for assessing the resistance of coating films to cracking and/or detachment from the substrate under different conditions of deformation. Describes a test procedure for coating on a metallic substrate when subjected to bending under standard conditions. For a multi-coat system, each coat may be tested separately or the complete system may be tested. The mandrel shall be in the form of a truncated cone. It is mounted horizontally on a base plate. An operating lever with draw bar is provided for bending the test panel. The test panels shall be of burnished steel, burnished tinplate or soft aluminium.
|
Withdrawn |
1984-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6860:2006 |
Paints and varnishes — Bend test (conical mandrel) |
ISO 6860:2006 describes an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal substrate when subjected to bending around a conical mandrel under standard conditions.
For a multi-coat system, each coat may be tested separately or the complete system may be tested.
|
Published |
2006-03 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/DIS 6923 |
Determination of monomeric diisocyanate content in coating materials and similar products using HPLC-UV |
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7252:1984 |
Paints and varnishes — Determination of total mercury — Flameless atomic absorption spectrometric method |
The reference method described is applicable to products having total mercury contents in the range of about 0.01 % (m/m) to 0.5 % (m/m). May also be extended to products with a total content of more than 0.5 % (m/m). The principle of the method consists in the combustion of the test portion with oxygen in an enclosed system. Reduction of the mercury(II) compounds contained in the resulting solution to elementary mercury. Entrainment of the metal in a gas stream at ambient temperature and determination as the monoatomic vapour by cold vapour atomic absorption spectrometry at a wavelength in the region of 253.7 nm.
|
Published |
1984-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7253:1984 |
Paints and varnishes — Determination of resistance to neutral salt spray |
|
Withdrawn |
1984-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7858-2:1987 |
Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 2: Installation requirements |
|
Withdrawn |
1987-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
91.140.60
Water supply systems
|
| ISO 7724-1:1984 |
Paints and varnishes — Colorimetry — Part 1: Principles |
Describes the colorimetric terms and fundamental requirements necessary for determining the colour co-ordinates of paint films. From among the various colour co-ordinates recommended by the CIE, the colour co-ordinates in the CIE 1964 supplementary standard colorimetric system and the colour co-ordinates in the colour space specified in CIE 1976 for measurements on paint films are in accordance with this standard.
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7724-2:1984 |
Paints and varnishes — Colorimetry — Part 2: Colour measurement |
Describes the method for determining the colour co-ordinates of paint films. The method is only application to paint films that appear to be uniformly of one colour (monochromatic), when examined with normal vision. Paint films that do not completely hide a non-transparent substrate may be measured by using this procedure. All the other paint films are outside the scope. The principle consists in measurement of the spectral photometric characteristics (spectral reflectances or spectral reflectance factors) with a spectrophotometer or measurement of the tristimulus values with a tristimulus colorimeter. Calculation of the chromaticity co-ordinates by a table.
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7724-3:1984 |
Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences |
Describes a method for the quantitative colorimetric evaluation of small differences between paint films. The CIE 1976 colour difference formula recommended in 1976 by the CIE has proved to be of practical value and is specified for this application. the principle is based on the calculation of differences in colour, lightness, chroma and hue between the paint films of a test specimen and a reference specimen in the CIE 1976 colour space. If the two methods specified are carried out, comparable results are obtained for high gloss paint films.
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783-1:1996 |
Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films |
|
Withdrawn |
1996-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783-1:1996/Cor 1:1998 |
Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films — Technical Corrigendum 1 |
|
Withdrawn |
1998-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783-2:1999 |
Paints and varnishes — Coating materials and coating systems for exterior masonry and concrete — Part 2: Determination and classification of water-vapour transmission rate (permeability) |
|
Withdrawn |
1999-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783:2011 |
Paints and varnishes — Determination of water-vapour transmission properties — Cup method |
|
Withdrawn |
2011-11 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783:2018 |
Paints and varnishes — Determination of water-vapour transmission properties — Cup method |
This document specifies a method for determining the water-vapour transmission properties of coatings of paints, varnishes and related products.
It supplements ISO 12572. As far as possible, the procedure, the definitions and the calculations have been taken over from ISO 12572. ISO 12572 can be consulted, if necessary, to obtain a better understanding of the procedure specified in this document.
Water-vapour transmission rates of more than 680 g/(m2⋅d) (i.e. water-vapour diffusion-equivalent air layer thicknesses, sd, of less than 0,03 m) are not accurately quantified by the test method described in this document.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-1:1997 |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Rotating abrasive-paper-covered wheel method |
Deals with the sampling and testing of paints, varnishes and related products. Gives a method for the determination of the resistance to abrasion of a dried coating, using abrasive paper attached to a wheel and abrading rotation.
|
Withdrawn |
1997-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-1:2016 |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen |
ISO 7784-1:2016 specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive-paper covered wheels affect the coating of the rotating test specimens.
|
Withdrawn |
2016-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-1:2023 |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen |
This document specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive-paper covered wheels affect the coating of the rotating test specimen.
|
Published |
2023-02 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-2:1997 |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Rotating abrasive rubber wheel method |
Deals with the sampling and testing of paints, varnishes and related products. Gives a method for the determination of the resistance to abrasion of a dried coating, using an abrasive rubber wheel and abrading by rotation.
|
Withdrawn |
1997-02 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-2:2016 |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
ISO 7784-2:2016 specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive rubber wheels affect the coating of the rotating test specimen.
|
Withdrawn |
2016-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-2:2023 |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
This document specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive rubber wheels affect the coating of the rotating test specimen.
|
Published |
2023-02 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-3:2000 |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Reciprocating test panel method |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-3:2016 |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen |
ISO 7784-3:2016 specifies a method for determining the resistance to abrasion of coatings, for which a loaded, rigid abrasive-paper covered wheel affects the coating of the linearly reciprocating test specimen.
|
Withdrawn |
2016-03 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-3:2022 |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen |
This document specifies a method for determining the resistance to abrasion of coatings, for which a loaded, rigid abrasive-paper covered wheel affects the coating of the linearly reciprocating test specimen.
|
Published |
2022-09 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7877:1984 |
Paints and varnishes — Coating of test panels at a specified spreading rate — Brush application |
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-1:1992 |
Coating powders — Part 1: Determination of particle size distribution by sieving |
The method discriminates between particles in the size range from 32 µm to 300 µm using circular test sieves with a sieving area having a diameter of 200 mm. It can also be used as an abbreviated procedure, i.e. for determination of the residue on one single sieve only.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-1:2019 |
Coating powders — Part 1: Determination of particle size distribution by sieving |
This document specifies a method for the determination of the particle size distribution of coating powders by sieve analysis. Particle size distributions with a maximum of less than 100 µm is determined by laser diffraction, ISO 8130‑13. This method is used especially for determining the oversize material or for the presence of contamination and can be used as a quality control procedure ("go"/"no go" test) by checking the amount retained on a single sieve.
The following particle sizes are typical for coating powders, however the particle size can deviate depending on the application:
— thin-film technology: 1 µm to 63 µm;
— electrostatic coating: 10 µm to 200 µm;
— fluidizing-bed method: 100 µm and above.
NOTE Sieves with a mesh size smaller than 32 µm are not practical and are likely to become blind during use.
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-2:1992 |
Coating powders — Part 2: Determination of density by gas comparison pyknometer (referee method) |
The method can be used for all types of coating powder, is simple to carry out, but requires more expensive instrumentation than is often used for density determinations. It is based on the determination of the volume of a weighed test portion by measuring the volume of the gas displaced. This is achieved by equalizing the pressure difference which arises due to the displacement of the gas.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|