| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4470:1981 |
Sawn timber — Determination of the average moisture content of a lot |
Two methods are specified: a) Measuring the electrical resistance or conductance of the test pieces using an electrical moisture meter and b) determining the loss in mass after drying test pieces until absolutely dry.
|
Published |
1981-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 4471:1982 |
Wood — Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands |
The method of selecting the appropriate test areas is described. Annexes A to E provide forms for the following: A = Description of the test area and taxation characteristics; B = Overall inventory report on trees growing in the test area No....; C = Inventory report on trees of species to be examined in test area No....; D = Inventory report on selection of sample trees in test area; E = Card of sample tree No....
|
Published |
1982-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 4472:1983 |
Coniferous and broadleaved sawn timber — Transportation packages |
Specifies requirements for square-edged and unedged, planed and unplaned sawn timber. Appropriate definitions are given and illustrated in the figure. Dimensions and mass are listed in a table.
|
Published |
1983-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 4473:1988 |
Coniferous and broadleaved tree sawlogs — Visible defects — Classification |
Refers to the terms and definitions given in ISO 4474. The following six groups are listed in a table in connection with their subgroups and varieties: Knots, shakes, defects of trunk shape, defects of wood structure, defects caused by fungi and damage.
|
Withdrawn |
1988-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 4474:1989 |
Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions |
Refers to ISO 4473 and is a trilingual edition. Examples are illustrated in six figures. Includes an alphabetical index in English, French and Russian.
|
Withdrawn |
1989-09 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 4475:1989 |
Coniferous and broadleaved tree sawlogs — Visible defects — Measurement |
Refers to the classification in ISO 4473 and to terms and definitions given in ISO 4474. Examples are illustrated in 13 figures. Where linear measurement is specified, this always refers to whole centimetres rounded off to the nearest centimetre below.
|
Published |
1989-07 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 4476:1983 |
Coniferous and broadleaved sawlogs — Sizes — Vocabulary |
The terms and definitions include the different types of ends, of diameters and other dimensions. This standard is a trilingual edition.
|
Withdrawn |
1983-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 4480:1983 |
Coniferous sawlogs — Measurement of sizes and determination of volume |
The vocabulary given in ISO 4476 applies to the methods specified. The thickness shall be taken as the middle diameter or the diameter of the upper end. The length shall be measured in metres, rounded to two decimal places. The volume shall be determined in cubic metres to two decimal places.
|
Withdrawn |
1983-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 4858:1982 |
Wood — Determination of volumetric shrinkage |
Two methods are specified: the stereometric method used for test pieces made in accordance with ISO 4469, and the mercury volumenometer method used for test pieces of any shape. References are made to ISO 3129, ISO 3130, and ISO 4469.
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 4859:1982 |
Wood — Determination of radial and tangential swelling |
Specifies a method which determines the linear swelling of test pieces after drying at a moisture content in equilibrium with the normal environment and at a moisture content, equal to or greater than the saturation point of the cellular walls of wood.
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 4860:1982 |
Wood — Determination of volumetric swelling |
Two methods are specified: the stereometric method used for test pieces made in accordance with ISO 4859, and the mercury volumenometer method used for test pieces of any shape. Determines the change in volume of test pieces after drying, at a moisture content in equilibrium with the normal environment and at a moisture content, equal to or greater than the saturation point of the cellular walls of wood.
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 8903:1994 |
Broadleaved sawn timber — Nominal sizes |
Specifies nominal sizes of unplaned, square-edged and unedged, broadleaved sawn timber.
|
Withdrawn |
1994-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 8903:2016 |
Broadleaved sawn timber — Nominal sizes |
ISO 8903:2016 specifies nominal sizes of unplanned, square-edged and unedged, sawn timber.
|
Published |
2016-02 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 8905:1988 |
Sawn timber — Test methods — Determination of ultimate strength in shearing parallel to grain |
This International Standard specifies a method of testing sawn timber of coniferous and broadleaved species in shearing parallel to the grain to determine the ultimate strength.
|
Published |
1988-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 8906:1988 |
Sawn timber — Test methods — Determination of resistance to local transverse compression |
This method is based on the load proportional limit and the load at a defined deformation which are given in the "load/deflection" curve. Stresses at these loads are calculated. Testing of small defect-free test pieces of wood is not covered.
|
Published |
1988-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 9086-1:1987 |
Wood — Methods of physical and mechanical testing — Vocabulary — Part 1: General concepts and macrostructure |
Gives terms and definitions relating to physical and mechanical properties of wood. Wood is defined as aggregate of secondary tissues (conductive, mechanical and storing) found in stems, branches and roots of woody plants between the bark and pith.
|
Withdrawn |
1987-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 9709:2005 |
Structural timber — Visual strength grading — Basic principles |
ISO 9709:2005 establishes the basic principles for rules and procedures governing the visual sorting of timber for use in structural applications.
|
Withdrawn |
2005-07 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 9709:2018 |
Structural timber — Visual strength grading — Basic principles |
This document establishes the basic principles for rules and procedures governing the visual sorting of timber for use in structural applications.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 39 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13059:2011 |
Round timber — Requirements for the measurement of dimensions and methods for the determination of volume |
ISO 13059:2011 establishes requirements for the measurement of dimensions and methods for the determination of round timber volume.
|
Published |
2011-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-1:2014 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests |
ISO 13061-1:2014 specifies oven-drying methods for determining the moisture content of wood for physical and mechanical tests on small clear wood specimens.
|
Published |
2014-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-1:2014/Amd 1:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests — Amendment 1 |
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-2:2014 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests |
ISO 13061-2:2014 specifies a method for determining the density of wood for physical and mechanical tests on small clear wood specimens. It may also be used to determine density of test specimens for other physical or mechanical test and/or to determine the relationship between density and other properties of wood.
|
Published |
2014-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-2:2014/Amd 1:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests — Amendment 1 |
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-3:2014 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 3: Determination of ultimate strength in static bending |
ISO 13061-3:2014 specifies a method for determining the ultimate strength of wood in static bending by measuring the breaking load applied in the mid-span of a simply supported beam.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-3:2014/Amd 1:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 3: Determination of ultimate strength in static bending — Amendment 1 |
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-4:2014 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending |
ISO 13061-4:2014 specifies a method for determining the modulus of elasticity of wood in static bending by measuring the deflection in the mid-span of a simply supported beam.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-4:2014/Amd 1:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending — Amendment 1 |
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-5:2020 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 5: Determination of strength in compression perpendicular to grain |
This document specifies a method for determining the strength in compression perpendicular to grain of wood.
|
Published |
2020-01 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-6:2014 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determination of ultimate tensile stress parallel to grain |
ISO 13061-6:2014 specifies a method for determining the ultimate tensile stress of wood parallel to grain on small clear specimens by measuring the breaking load applied statically along the longitudinal axis of a test piece.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-7:2014 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain |
ISO 13061-7:2014 specifies a method for the determination of ultimate tensile stress of wood perpendicular to grain of small clear specimens in the radial and tangential directions by measuring the breaking load applied statically perpendicular to the longitudinal axis of a test piece.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-8:2022 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 8: Determination of ultimate strength in shearing parallel to grain |
This document specifies a method for determining the ultimate strength in shearing parallel to grain of small clear wood specimens by measuring the breaking load applied statically along the radial or the tangential plane of a test piece.
|
Published |
2022-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-10:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 10: Determination of impact bending strength |
ISO 13061-10:2017 specifies a method for determining the impact bending strength of wood.
|
Published |
2017-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-11:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 11: Determination of resistance to impact indentation |
ISO 13061-11:2017 specifies a method for the determination of the resistance of wood to impact indentation by a steel ball.
|
Published |
2017-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-12:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 12: Determination of static hardness |
ISO 13061-12:2017 specifies a method for determining of the static hardness of wood by measuring resistance of a test piece to the penetration of a plunger under gradually increasing load.
|
Published |
2017-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-13:2016 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage |
ISO 13061-13:2016 specifies a method for the determination of linear shrinkage in the radial and tangential directions of wood.
|
Published |
2016-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO/DIS 13061-13 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage |
ISO 13061-13:2016 specifies a method for the determination of linear shrinkage in the radial and tangential directions of wood.
|
Under development |
|
Edition : 2 |
Number of pages : 3 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-14:2016 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage |
ISO 13061-14:2016 specifies methods for the determination of volumetric shrinkage of wood.
|
Published |
2016-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-15:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 15: Determination of radial and tangential swelling |
ISO 13061-15:2017 specifies a method for the determination of linear swelling in the radial and tangential directions of wood.
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-16:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 16: Determination of volumetric swelling |
ISO 13061-16:2017 specifies methods for the determination of volumetric swelling of wood.
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-17:2017 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 17: Determination of ultimate stress in compression parallel to grain |
ISO 13061-17:2017 specifies a method for determining the ultimate stress in compression parallel to grain of wood.
|
Published |
2017-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13061-18:2022 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 18: Vocabulary |
This document lists the terms and definitions relating to general concepts, macrostructure, sampling, and methods of physical and mechanical testing of wood. Other terminologies that are not mentioned in this standard are defined in ISO 24294.
|
Published |
2022-01 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13912:2005 |
Structural timber — Machine strength grading — Basic principles |
ISO 13912:2005 establishes the basic principles for rules and procedures governing the machine sorting of timber for use in structural applications.
|
Withdrawn |
2005-07 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 13912:2017 |
Structural timber — Machine strength grading — Basic principles |
ISO 13912:2017 establishes the basic principles for rules and procedures governing the machine sorting of timber for use in structural applications. This applies to conventional bending type strength-grading machines as well as more recent machines that use other properties for strength-grading purposes.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 16415:2012 |
Non-structural timber grading requirements |
ISO 16415:2012 delineates and illustrates broad grade categories that specify essential features typically found in those categories based on commonalities of numerous national standards and grading rules used for non-structural timber of non-coniferous and coniferous species in international commerce.
ISO 16415:2012 provides a basis for recognition of a national standard or grading rules that complies with ISO 16415:2012 and is applicable to all methods of visual grading systems for non-structural timber of all non-coniferous and coniferous species of timber.
Non-structural timber produced from bamboo is not covered by ISO 16415:2012.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 17959:2014 |
General requirements for solid wood flooring |
ISO 17959:2014 specifies the requirements and test methods of characteristics of solid wood flooring boards for internal (interior) use as flooring. It also specifies packaging and marking requirements.
It is applicable to both finished and unfinished solid wood flooring board. Solid wood parquet is not covered.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 19474:2018 |
Round timber — Visual characteristics — Methods of determination |
ISO 19474:2018 defines requirements to methods of determination of visual characteristics of round timber.
|
Published |
2018-03 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 21625:2020 |
Vocabulary related to bamboo and bamboo products |
This document defines terms related to bamboo, intermediate bamboo and bamboo products.
This document is applicable to bamboo, intermediate bamboo and bamboo products in production and trade.
|
Published |
2020-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 9050:1990 |
Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors |
Specifies Methods of determining light and energy transmission of solar radiation for glazing units in buildings. These characteristics can serve as a basis for light, heating and ventilation calculations of rooms. Applies both to conventional glazing units and to absorbing or reflecting solar-control glazing units. The appropriate formulae for single, double and triple glazing units are given. Applies to all transparent materials except those which show significant transmission in the wavelength region of ambient temperature radiation, such as certain plastic sheets.
|
Withdrawn |
1990-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 21887:2007 |
Durability of wood and wood-based products — Use classes |
ISO 21887:2007 defines five use classes that represent different service situations to which wood and wood-based products can be exposed all over the world. Subclasses are also defined for these use classes.
ISO 21887:2007 applies only to preservatives and processes for pre-treatment of wood and wood products and is not intended for products and processes for remediation and eradication of existing damage to timber. The annex to ISO 21887:2007 provides guidance on applying use classification to specify preservative treatments, treated wood, naturally durable and modified wood but does not provide definitive specifications.
|
Published |
2007-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
;
71.100.50
Wood-protecting chemicals
;
79.060.01
Wood-based panels in general
|
| ISO 22157-1:2004 |
Bamboo — Determination of physical and mechanical properties — Part 1: Requirements |
ISO 22157-1:2004 specifies test methods for evaluating the following characteristic physical and strength properties for bamboo: moisture content, mass per volume, shrinkage, compression, bending, shear and tension.
|
Withdrawn |
2004-06 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO/TR 22157-2:2004 |
Bamboo — Determination of physical and mechanical properties — Part 2: Laboratory manual |
ISO/TR 22157-2:2004 provides informative guidelines for staff in laboratories on how to perform tests according to ISO 22157-1:2004.
|
Withdrawn |
2004-05 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 22157:2019 |
Bamboo structures — Determination of physical and mechanical properties of bamboo culms — Test methods |
This document specifies test procedures for specimens obtained from round bamboo culms. The data obtained from the test methods can be used to establish characteristic physical or mechanical properties to be used in structural engineering design or for other scientific purposes. This document provides methods for evaluating the following physical and strength properties: moisture content, density, mass per unit length; strength properties parallel to the fibre direction, compression, tension and bending, and strength properties perpendicular to the fibre direction, tension and bending. It also provides methods to estimate moduli of elasticity in bending, compression and tension parallel to fibres, and bending perpendicular to fibres.
The test methods reported in this document are intended for commercial testing applications. The test methods reported in this document are intended for commercial testing applications and can also be adopted as benchmark methods for scientific research.
This document is organized to provide requirements for standard tests to be carried out to determine the material properties of full-culm bamboo as a structural material.
|
Published |
2019-01 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 23066:2021 |
Vocabulary related to rattan materials and products |
This document defines terms relating to rattan source plants, materials, intermediate rattan products and rattan products.
This document is applicable to rattan materials and products in production and trade.
|
Published |
2021-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 23067:2022 |
Grading system for rattan: Requirements and classification |
This document gives guidelines and requirements to sort and classify rattan cane materials (poles and derivatives) based on physical properties, quality and market values.
|
Published |
2022-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
|
| ISO 24294:2013 |
Timber — Round and sawn timber — Vocabulary |
ISO 24294:2013 contains the terms and definitions of concepts to establish a multilingual vocabulary of terminology to be applied in forest and wood working spheres, with the scope of identification of a tree and of its parts in round and sawn aspects; its measurements; grading; condition; features; sizes; and the natural, biological and infestational defects of wood.
|
Withdrawn |
2013-09 |
Edition : 1 |
Number of pages : 70 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 24294:2021 |
Timber — Round and sawn timber — Vocabulary |
This document defines terms related to round and sawn timber. It applies to identification of a tree and its components, stages of processing in round and sawn forms, and timber grading, dimensions, anatomical structure, features, moisture content and conditions relating to stain, fungal and insect attack. It does not apply to terms related to strength properties of wood, engineered timber products or timber structures.
|
Published |
2021-09 |
Edition : 2 |
Number of pages : 46 |
Technical Committee |
79.040
Wood, sawlogs and sawn timber
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 11485-1:2011 |
Glass in building — Curved glass — Part 1: Terminology and definitions |
ISO 11458-1:2011 specifies terminology and definitions for curved glass used in general building construction, furniture, display and various other non-automotive applications.
|
Published |
2011-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
01.040.81
Glass and ceramics industries (Vocabularies)
;
81.040.20
Glass in building
|
| ISO 1288-1:2016 |
Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass |
ISO 1288-1:2016 specifies the determination of the bending strength of monolithic glass for use in buildings. The testing of insulating units or laminated glass is excluded from this part of ISO 1288.
ISO 1288-1:2016 describes
- considerations to be taken into account when testing glass,
- explanations of the reasons for designing different test methods,
- limitations of the test methods, and
- gives pointers to safety requirements for the personnel operating the test equipment.
ISO 1288‑2, ISO 1288‑3, ISO 1288‑4 and ISO 1288‑5 specify test methods in detail.
The test methods specified in this part of ISO 1288 are intended to provide large numbers of bending strength values that can be used as the basis for statistical evaluation of glass strength.
|
Published |
2016-02 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 1288-2:2016 |
Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas |
ISO 1288-2:2016 specifies a method for determining the bending strength of glass for use in buildings, excluding the effects of the edges.
The limitations of this part of ISO 1288 are described in ISO 1288‑1.
|
Published |
2016-02 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 1288-3:2016 |
Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending) |
ISO 1288-3:2016 specifies a method for determining the bending strength, including the effects of the edges, of flat glass for use in building. The method specified can also be used to determine the bending strength of the edges of glass separately.
The limitations of this part of ISO 1288 are described in ISO 1288‑1.
|
Published |
2016-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 1288-4:2016 |
Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass |
ISO 1288-4:2016 specifies a method for determining the bending strength (defined as the profile bending strength) of wired or unwired channel shaped glass for use in buildings.
The limitations of this part of ISO 1288 are described in ISO 1288‑1.
|
Published |
2016-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 1288-5:2016 |
Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas |
ISO 1288-5:2016 specifies a method for determining the comparative bending strength of glass for use in buildings, excluding the effects of the edges.
See ISO 1288‑1, 5.1.4 for an explanation as to why this test method should only be used for comparing the strength of types of glass and not for assessing strength for design purposes.
The limitations of this part of ISO 1288 are described in ISO 1288‑1.
ISO 1288‑1 should be read in conjunction with this part of ISO 1288.
This test method is not suitable for patterned glass.
|
Published |
2016-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 3009:1976 |
Fire-resistance tests — Glazed elements |
Specifies methods of testing and assessing non load bearing, vertical glazed elements of construction which are intended either to provide, wholly or in part, separation between different areas in a building, or to form part of the external walls. It is applicable to glazed separating elements such as windows, walls of glass blocks and other light-transmitting assemblies.
|
Withdrawn |
1976-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.220.50
Fire-resistance of building materials and elements
;
81.040.20
Glass in building
|
| ISO 3009:1976/Amd 1:1984 |
Fire-resistance tests — Glazed elements — Amendment 1 |
Gives deletions and substitutions of the clauses 8., 8.1., 8.2., A.4., A.5., B.0. and B.3.
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.220.50
Fire-resistance of building materials and elements
;
81.040.20
Glass in building
|
| ISO 3009:2003 |
Fire-resistance tests — Elements of building construction — Glazed elements |
ISO 3009:2003 provides a test method for determining and assessing the fire resistance performance of both insulated and uninsulated glazed elements of building construction, when those elements are exposed to heating on one face. It is applicable to glazed separating elements such as screens, walls of glass blocks and other light-transmitting assemblies used in vertical, inclined or horizontal orientations, and to all separating elements containing glazing intended to be assessed in accordance with ISO 834-1, except for doors and shutter assemblies, which are intended to be tested in accordance with ISO 3008. It is directly applicable to planar elements, but also gives guidance on the testing of non-planar elements such as pyramids.
|
Published |
2003-11 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
13.220.50
Fire-resistance of building materials and elements
;
81.040.20
Glass in building
|
| ISO 11485-2:2011 |
Glass in building — Curved glass — Part 2: Quality requirements |
ISO 11485-2:2011 specifies the quality requirements for curved glass used in general building construction, furniture, display and various other non-automotive applications.
|
Published |
2011-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 9050:2003 |
Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors |
ISO 9050:2003 specifies methods of determining light and energy transmittance of solar radiation for glazing in buildings. These characteristic data can serve as a basis for light, heating and ventilation calculations of rooms and can permit comparison between different types of glazing.
ISO 9050:2003 is applicable both to conventional glazing units and to absorbing or reflecting solar-control glazing, used as glazed apertures. The appropriate formulae for single, double and triple glazing are given. Furthermore, the general calculation procedures for units consisting of more than components are established.
ISO 9050:2003 is applicable to all transparent materials. One exception is the treatment of the secondary heat transfer factor and the total solar energy factor for those materials that show significant transmittance in the wavelength region of ambient temperature radiation (5 microns to 50 microns), such as certain plastic sheets.
|
Published |
2003-08 |
Edition : 2 |
Number of pages : 27 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 9051:1990 |
Glass in building — Glazed assemblies containing fire-resistant transparent or translucent glass, for use in building |
Specifies the classification and marking of glass products, which will be described in future International Standards on basic or processed glass products, in assemblies for use in building and intended to provide some degree of fire-resistance, classes RE and REI.
|
Withdrawn |
1990-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 9051:2001 |
Glass in building — Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building |
|
Withdrawn |
2001-08 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 10291:1994 |
Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Guarded hot plate method |
Specifies a measuring method used to determine the coefficient of thermal transmittance, the U-value, of multiple glazing with flat and parallel surfaces, including cast and figured rolled glass. Applies to multiple glazing with outer panes which are not transparent to far-infrared radiation, which is the case for normal window glass. Internal elements may be far-infrared transparent.
|
Published |
1994-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 10292:1994 |
Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing |
Applies to glass, coated glass and materials opaque in the far infrared wavelengths. Gives the fundamental rules for calculating the thermal transmittance in the glazing central area (edge effects are not included). The rules are intended to enable the heat loss through glazing in a building to be estimated from the U values and, together with heat losses through the opaque elements of the building, are used to determine the capacity of the heating or cooling plant. In addition, U values for other purposes (e.g. condensation on glazing surfaces, seasonal heat loss through glazing) can be calculated using the same procedure.
|
Published |
1994-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 10293:1997 |
Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Heat flow meter method |
Gives a measuring method used to determine the U value (thermal transmittance) of multiple glazing with flat and parallel surfaces. Structured surfaces may be considered to be flat.
|
Published |
1997-02 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
81.040.20
Glass in building
|
| ISO/AWI 10293 |
Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Heat flow meter method |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
81.040.20
Glass in building
|
| ISO 11479-1:2011 |
Glass in building — Coated glass — Part 1: Physical defects |
This part of ISO 11479 specifies optical quality requirements for coatings applied to glass using either pyrolytic,
sol-gel or vacuum (sputtering) deposition methods for use in building glazing. More specifically, this part of
ISO 11479 relates to low-e and solar-control coated glass. This part of ISO 11479 is not applicable to patterned
or other optically distorting glass.
|
Published |
2011-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 11479-2:2011 |
Glass in building — Coated glass — Part 2: Colour of façade |
ISO 11479-2:2011 specifies a method for objective evaluation of the colour of coated glass when used in facades and viewed from the outside, as well as for measuring colour differences within the same glass pane and between two adjacent panes in the same facade. ISO 11479-2:2011 does not specify requirements for determining colour differences of transmitted colour as viewed from the inside or outside of a facade, nor for internal reflected colour. The comparison should only be undertaken for panes of the same glass type, composition and interior conditions and situated in the same plane of a facade.
Specific requirements are given for coated glass, dependent upon its light transmittance and reflectance.
ISO 11479-2:2011 is not applicable to curved or bent glass, which is specifically excluded for technical reasons.
|
Published |
2011-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 11485-3:2014 |
Glass in building — Curved glass — Part 3: Requirements for curved tempered and curved laminated safety glass |
ISO 11485-3:2014 defines the conditions to classify a curved glass product as a curved safety glass.
It classifies curved tempered glass and curved laminated glass as safety glasses used in buildings, by performance under impact and by mode of breakage. The classification by drop height corresponds to graded values of energy transmitted by the impact of a person.
The classification system in ISO 11485-3:2014 relates to increasing personal safety by the reduction of cutting and piercing injuries to persons and the containment characteristics of the material.
ISO 11485-3:2014 covers fracture characteristics, including fragmentation test and the physical and mechanical characteristics of curved tempered safety glass for use in buildings.
|
Published |
2014-09 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12540:2017 |
Glass in building — Tempered soda lime silicate safety glass |
ISO 12540:2017 covers product definitions, product characteristics, i.e. tolerances, flatness, edgework, etc., fracture characteristics, including fragmentation, and the physical and mechanical characteristics of flat tempered soda lime silicate safety glass for use in buildings.
ISO 12540:2017 does not cover curved (bent) glass according to ISO 11485.
Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate glass product standard. Thermally toughened soda lime silicate safety glass, in this case, does not lose its mechanical or thermal characteristics.
|
Published |
2017-03 |
Edition : 1 |
Number of pages : 33 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-1:1998 |
Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts |
|
Withdrawn |
1998-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.040.81
Glass and ceramics industries (Vocabularies)
;
81.040.20
Glass in building
|
| ISO 12543-1:2011 |
Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts |
ISO 12543-1:2011 defines terms and describes component parts for laminated glass and laminated safety glass for use in building.
|
Withdrawn |
2011-08 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
01.040.81
Glass and ceramics industries (Vocabularies)
;
81.040.20
Glass in building
|
| ISO 12543-1:2021 |
Glass in building — Laminated glass and laminated safety glass — Part 1: Vocabulary and description of component parts |
This document defines terms and describes component parts for laminated glass and laminated safety glass for use in building.
|
Published |
2021-12 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
01.040.81
Glass and ceramics industries (Vocabularies)
;
81.040.20
Glass in building
|
| ISO 12543-2:2004 |
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass |
ISO 12543-2:2004 specifies performance requirements for laminated safety glass.
|
Withdrawn |
2004-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-2:2011 |
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass |
ISO 12543-2:2011 specifies performance requirements for laminated safety glass as defined in ISO 12543-1.
|
Withdrawn |
2011-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-2:2021 |
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass |
This document specifies performance requirements for laminated safety glass as defined in ISO 12543-1.
NOTE Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6.
|
Published |
2021-12 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-3:1998 |
Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass |
|
Withdrawn |
1998-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-3:2011 |
Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass |
ISO 12543-3:2011 specifies performance requirements for laminated glass as defined in ISO 12543-1.
|
Withdrawn |
2011-08 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-3:2021 |
Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass |
This document specifies performance requirements for laminated glass as defined in ISO 12543-1.
NOTE Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6.
|
Published |
2021-12 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-4:2011 |
Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability |
ISO 12543-4:2011 specifies test methods in respect of resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building.
|
Withdrawn |
2011-08 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-4:2021 |
Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability |
This document specifies test methods relating to resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building.
|
Published |
2021-12 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-5:1998 |
Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing |
|
Withdrawn |
1998-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-5:2011 |
Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing |
ISO 12543-5:2011 specifies dimensions, limit deviations and edge finishes of laminated glass and laminated safety glass for use in building.
|
Withdrawn |
2011-08 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-5:2021 |
Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing |
This document specifies dimensions, limit deviations and edge finishes of laminated glass and laminated safety glass for use in building.
This document is not applicable to panes having an area less than 0,05 m2.
|
Published |
2021-12 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-6:1998 |
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance |
|
Withdrawn |
1998-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-6:2011 |
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance |
ISO 12543-6:2011 specifies defects of finished sizes and test methods with regard to the appearance of laminated glass when looking through the glass.
ISO 12543-6:2011 is applicable to finished sizes at the time of supply.
|
Withdrawn |
2011-08 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-6:2011/Cor 1:2012 |
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance — Technical Corrigendum 1 |
|
Withdrawn |
2012-05 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 12543-6:2021 |
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance |
This document specifies defects of finished sizes and test methods with regard to the appearance of laminated glass and laminated safety glass when looking through the glass.
All references to laminated glass in this document refer to both laminated glass and laminated safety glass.
NOTE Special attention is paid to acceptability criteria in the vision area.
This document is applicable to finished sizes at the time of supply.
|
Published |
2021-12 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 14438:2002 |
Glass in building — Determination of energy balance value — Calculation method |
This European Standard specifies a calculation method to determine the energy balance value of glazing. This
European Standard applies to transparent materials such as glass and combinations of glass used to glaze
windows in buildings.
This method is intended to evaluate the balance of heat loss and useful heat gain by solar radiation entering the
building through the glazing for a given period by means of an average rate of loss (or gain) of heat called the
energy balance value.
The method enables producers to compare the performance of their glazing products. The energy balance value
should not be used for energy use or heating capacity calculations in buildings.
|
Published |
2002-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.040.20
Glass in building
;
91.120.10
Thermal insulation of buildings
|
| ISO 16293-1:2008 |
Glass in building — Basic soda lime silicate glass products — Part 1: Definitions and general physical and mechanical properties |
ISO 16293-1:2008 defines and classifies basic soda-lime silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for the product types are not included in this part of ISO 16293-1:2008.
|
Published |
2008-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 16293-2:2017 |
Glass in building — Basic soda lime silicate glass products — Part 2: Float glass |
ISO 16293-2:2017 specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass for use in building, as defined in ISO 16293‑1.
ISO 16293-2:2017 applies to float glass supplied in stock sizes and final cut sizes.
|
Published |
2017-03 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 16293-3:2017 |
Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass |
ISO 16293-3:2017 specifies dimensional and minimum quality requirements (in respect of optical, visual and wire faults) for polished wired glass, as defined in ISO 16293‑1, for use in building.
ISO 16293-3:2017 applies only to polished wired glass supplied in rectangular panes, in stock sizes and final cut sizes.
|
Published |
2017-03 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 16293-4:2016 |
Glass in building — Basic soda lime silicate glass products — Part 4: Wired patterned glass |
ISO 16293-4:2016 specifies dimensional and minimum quality requirements (in respect of visual, pattern and wire faults) for wired patterned glass, as defined in ISO 16293‑1, for use in building.
ISO 16293-4:2016 applies only to wired patterned glass supplied in rectangular panes, in stock sizes and in final cut sizes.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
81.040.20
Glass in building
|