| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4801:1979 |
Glass alcoholometers and alcohol hydrometers not incorporating a thermometer |
Three different types of glass instruments for the accurate determination of the ethanol content of simple mixtures of ethanol and water are specified: alcoholometers graduated in percentage of ethanol by volume or by mass and alcohol hydrometers graduated in units of density. Construction, material and scale are described. The dimensions are tabled and the value of the ethanol content by mass or volume and by density and surface tension are given.
|
Published |
1979-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 4805:1982 |
Laboratory glassware — Thermo-alcoholometers and alcohol-thermohydrometers |
The requirements specify the instruments with an incorporated thermometer for determination the alcohol content by mass or the alcohol concentration by volume of mixture of water and alcohol. Construction, materials and scale are described. The dimensions are tabled and the values of the alcohol mass content and the alcohol concentration by density and surface tension are given in a second table.
|
Withdrawn |
1982-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 5215:2022 |
Laboratory plastic ware — Volumetric flasks |
This document sets out requirements for the construction of general laboratory volumetric flasks made of plastic material.
|
Published |
2022-05 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO/CD TR 6037 |
Automated liquid handling systems – Uncertainty of the measurement procedures |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
71.040.20
Laboratory ware and related apparatus
|
| ISO 6706:1981 |
Plastics laboratory ware — Graduated measuring cylinders |
The requirements specify a series of plastic cylinders having a graduated volumetric scale and a pouring spout. The series of nominal capacities is tabled and so do the dimesions. The construction is illustrated by some figures showing the general appearance and the scales of measuring cylinders. The annex deal with testing of plastic cylinders, test for ionic material extracted by water and with the flexibility and recovery test.
|
Published |
1981-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 7056:1981 |
Plastics laboratory ware — Beakers |
The requirements specify a series of plastic cylinders having a tapered ore non-tapered form. The capacity is in the range from 25 ml to 5000 ml. For non-opaque beakers the graduation is specified. The construction, dimensions and material are described. The annexes deal with the test for ionic material extracted by water and with the flexibility test.
|
Published |
1981-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| IEC/TR 828:1988 |
Pin allocations for future microprocessor systems using the IEC 603-2 connector |
|
Withdrawn |
1988-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
35.160
Microprocessor systems
|
| ISO 8655-1:2002 |
Piston-operated volumetric apparatus — Part 1: Terminology, general requirements and user recommendations |
ISO 8655-1:2002 specifies the general requirements for piston-operated volumetric apparatus. It is applicable to piston pipettes, piston burettes, dilutors and dispensers. It furthermore defines terms for the use of piston-operated volumetric apparatus and gives a list of equivalent terms. It also gives user recommendations.
ISO 8655-1:2002 is not applicable to medical products intended for use on human beings, e.g. for medical syringes.
|
Withdrawn |
2002-09 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
01.040.17
Metrology and measurement. Physical phenomena (Vocabularies)
|
| ISO 8655-1:2002/Cor 1:2008 |
Piston-operated volumetric apparatus — Part 1: Terminology, general requirements and user recommendations — Technical Corrigendum 1 |
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
01.040.17
Metrology and measurement. Physical phenomena (Vocabularies)
|
| ISO 8655-1:2022 |
Piston-operated volumetric apparatus — Part 1: Terminology, general requirements and user recommendations |
This document specifies general requirements for piston-operated volumetric apparatus (POVA). It is applicable to pipettes, burettes, dilutors, dispensers and manually operated precision laboratory syringes. It furthermore defines terms for the use of piston-operated volumetric apparatus and gives user recommendations.
This document does not apply to medical products intended for use on humans, e.g. for medical syringes.
|
Published |
2022-04 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
01.040.17
Metrology and measurement. Physical phenomena (Vocabularies)
|
| ISO 8655-2:2002 |
Piston-operated volumetric apparatus — Part 2: Piston pipettes |
ISO 8655-2:2002 specifies metrological requirements, maximum permissible errors, requirements for marking and information to be provided for users, for air-displacement (type A) and positive-displacement (type D) single-channel and multi-channel piston pipettes, complete with their selected tip(s) and any other essential, consumable parts, designed to deliver their specified nominal volume (Ex).
|
Withdrawn |
2002-09 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-2:2002/Cor 1:2008 |
Piston-operated volumetric apparatus — Part 2: Piston pipettes — Technical Corrigendum 1 |
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-2:2022 |
Piston-operated volumetric apparatus — Part 2: Pipettes |
This document specifies
— metrological requirements,
— maximum permissible errors,
— requirements for marking and
— information to be provided for users,
for air-displacement (type A) and positive displacement (type D) single-channel and multi-channel pipettes, complete with their selected tip(s) and any other essential, consumable parts, designed to deliver the selected volume (Ex).
|
Published |
2022-04 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-3:2002 |
Piston-operated volumetric apparatus — Part 3: Piston burettes |
ISO 8655-3:2002 specifies metrological requirements, maximum permissible errors, requirements for marking and information to be provided for users, for piston burettes. It is applicable to piston burettes with nominal volumes up to 100 ml, designed to deliver their volume (Ex).
|
Withdrawn |
2002-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-3:2002/Cor 1:2008 |
Piston-operated volumetric apparatus — Part 3: Piston burettes — Technical Corrigendum 1 |
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-3:2022 |
Piston-operated volumetric apparatus — Part 3: Burettes |
This document specifies
— metrological requirements,
— maximum permissible errors,
— requirements for marking and
— information to be provided for users,
for burettes. This document is applicable to burettes with nominal volumes up to 100 ml, designed to deliver their specified volume (Ex).
|
Published |
2022-04 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-4:2002 |
Piston-operated volumetric apparatus — Part 4: Dilutors |
ISO 8655-4:2002 specifies metrological requirements, maximum permissible errors, requirements for marking and information to be provided for users, for dilutors with a sample uptake capacity (In) from 5 microlitres to 10 millilitres and a diluent capacity (Ex) from 50 microlitres to 100 millilitres. They are designed to deliver the sample and diluent together in measured proportion and measured volume.
|
Withdrawn |
2002-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-4:2002/Cor 1:2008 |
Piston-operated volumetric apparatus — Part 4: Dilutors — Technical Corrigendum 1 |
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-4:2022 |
Piston-operated volumetric apparatus — Part 4: Dilutors |
This document specifies
— metrological requirements,
— maximum permissible errors,
— requirements for marking and
— information to be provided for users,
for dilutors with a sample uptake capacity (In) from 5 μl to 1 ml and a diluent capacity (Ex) from 50 μl to 100 ml. They are designed to deliver the sample and diluent together in measured proportion and measured volume.
|
Published |
2022-04 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-5:2002 |
Piston-operated volumetric apparatus — Part 5: Dispensers |
ISO 8655-5:2002 specifies metrological requirements, maximum permissible errors, requirements for marking and information to be provided for users for dispensers. It is applicable to dispensers with nominal volumes from 1 microlitre up to 200 millilitres, designed to deliver their volume (Ex).
|
Withdrawn |
2002-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-5:2002/Cor 1:2008 |
Piston-operated volumetric apparatus — Part 5: Dispensers — Technical Corrigendum 1 |
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-5:2022 |
Piston-operated volumetric apparatus — Part 5: Dispensers |
This document specifies
— metrological requirements,
— maximum permissible errors,
— requirements for marking and
— information to be provided for users,
for dispensers. It is applicable to dispensers with nominal volumes from 1 μl up to 200 ml, designed to deliver their volume (Ex).
|
Published |
2022-04 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-6:2002 |
Piston-operated volumetric apparatus — Part 6: Gravimetric methods for the determination of measurement error |
ISO 8655-6:2002 specifies the gravimetric determination of errors of measurement for conformity testing of piston-operated volumetric apparatus. The tests are applicable to complete systems comprising the basic apparatus and all parts selected for use with the apparatus, disposable or reusable, involved in the measurement by uptake (In) or delivery (Ex) process.
|
Withdrawn |
2002-09 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-6:2002/Cor 1:2008 |
Piston-operated volumetric apparatus — Part 6: Gravimetric methods for the determination of measurement error — Technical Corrigendum 1 |
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-6:2022 |
Piston-operated volumetric apparatus — Part 6: Gravimetric reference measurement procedure for the determination of volume |
This document specifies a gravimetric reference measurement procedure for the determination of volume of piston-operated volumetric apparatus (POVA). The procedure is applicable to complete systems comprising the basic apparatus and all parts selected for use with the apparatus, disposable or reusable, involved in the measurement by delivery (Ex) or contained (In).
|
Published |
2022-04 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-7:2005 |
Piston-operated volumetric apparatus — Part 7: Non-gravimetric methods for the assessment of equipment performance |
ISO 8655-7:2005 specifies the photometric and titrimetric determination of errors of measurement of piston-operated volumetric apparatus. The tests are applicable to complete systems comprising the basic apparatus and all parts selected for use with the apparatus, disposable or reusable, involved in the measurement by delivery process.
These non-gravimetric test methods can be applied: as aids to quality assurance by the supplier; as routine quality assurance and routine calibrations by the user; and as routine and post-repair testing.
The methods described in ISO 8655-7:2005 are not applicable as alternatives to the gravimetric reference test methods specified in ISO 8655-6, which gives the only method suitable as a basis for supplier's declarations or independent certification of conformity.
NOTE 1 Metrological requirements for piston-operated volumetric apparatus, especially maximum permissible errors, are specified in ISO 8655-2 to ISO 8655-5.
NOTE 2 For conformity tests or type tests for declaration and certification of conformity, see the gravimetric reference test methods in ISO 8655-6.
|
Withdrawn |
2005-09 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-7:2005/Cor 1:2008 |
Piston-operated volumetric apparatus — Part 7: Non-gravimetric methods for the assessment of equipment performance — Technical Corrigendum 1 |
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-7:2022 |
Piston-operated volumetric apparatus — Part 7: Alternative measurement procedures for the determination of volume |
This document specifies alternative measurement procedures for the determination of volume of piston-operated volumetric apparatus.
The procedures are applicable to complete systems comprising the basic apparatus and all parts selected for use with the apparatus, disposable or reusable, involved in the measurement by delivery process (Ex). Methods described in this document are suitable for various maximum nominal volumes of piston-operated volumetric apparatus. It is the responsibility of the user to select the appropriate method.
|
Published |
2022-04 |
Edition : 2 |
Number of pages : 48 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 8655-8:2022 |
Piston-operated volumetric apparatus — Part 8: Photometric reference measurement procedure for the determination of volume |
This document specifies the photometric reference measurement procedure for the determination of volume of piston-operated volumetric apparatus (POVA). The procedure is applicable to complete systems comprising the basic apparatus with a maximum nominal volume of 5 000 µl and all parts selected for use with the apparatus, disposable or reusable, involved in the measurement by delivery (Ex).
|
Published |
2022-04 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
71.040.20
Laboratory ware and related apparatus
|
| ISO 8655-9:2022 |
Piston-operated volumetric apparatus — Part 9: Manually operated precision laboratory syringes |
This document specifies
— metrological requirements,
— maximum permissible errors,
— requirements for marking and
— information to be provided for users,
for manually operated precision laboratory syringes made of glass or glass and metal designed to deliver their selected volume (Ex).
Manually operated precision laboratory syringes are instruments used for delivering liquids and gases. The barrel is typically made of glass and the plunger and the needle are typically made of metal.
|
Published |
2022-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
71.040.20
Laboratory ware and related apparatus
|
| ISO/DIS 8655-10 |
Piston-operated volumetric apparatus — Part 10: User guidance and requirements for competence, training, and POVA suitability |
|
Under development |
|
Edition : 1 |
Number of pages : 25 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
03.100.30
Management of human resources
|
| ISO 15212-1:1998 |
Oscillation-type density meters — Part 1: Laboratory instruments |
|
Published |
1998-10 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 15212-1:1998/Cor 1:2008 |
Oscillation-type density meters — Part 1: Laboratory instruments — Technical Corrigendum 1 |
|
Published |
2008-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 15212-2:2002 |
Oscillation-type density meters — Part 2: Process instruments for homogeneous liquids |
|
Published |
2002-03 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 15212-2:2002/Cor 1:2008 |
Oscillation-type density meters — Part 2: Process instruments for homogeneous liquids — Technical Corrigendum 1 |
|
Published |
2008-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO/TR 16153:2004 |
Piston-operated volumetric instruments — Determination of uncertainty for volume measurements made using the photometric method |
ISO/TR 16153:2004 gives the detailed evaluation of uncertainty for volume measurements according to the Guide to the expression of uncertainty in measurements (GUM). ISO 8655-7 covers non-gravimetric methods of volume measurement. Annex A of ISO 8655-7 presents the details of a method that employs removable cells (vials) in a UV/VIS photometer. Annex B of ISO 8655-7 presents the details of a method that employs a flow cell fixed in place in a UV/VIS photometer. ISO/TR 16153:2004 covers the uncertainty of measurement of both methods.
|
Withdrawn |
2004-10 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO/TR 16153:2023 |
Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a photometric method |
This document gives detailed information regarding the evaluation of uncertainty for the photometric reference measurement procedure specified in ISO 8655-8 and the photometric procedure specified in ISO 8655-7:2022, Annex B according to ISO/IEC Guide 98-3.
This document also describes the determination of other uncertainty components related to the liquid delivery process of a piston-operated volumetric apparatus (POVA), e.g. repeatability and handling. Furthermore, it provides examples for the calculation and application of the uncertainty of the mean delivered volume and the uncertainty in use of a single delivered volume.
|
Published |
2023-02 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO/TR 20461:2000 |
Determination of uncertainty for volume measurements made using the gravimetric method |
This Technical Report gives the detailed evaluation of uncertainty for volume measurements according to the
Guide to the Expression of Uncertainty in Measurement (GUM) [1]. It uses the gravimetric method specified in
ISO 8655-6 [2] as the reference method for calibrating piston-operated volumetric apparatus. It has been arranged
in paragraphs to facilitate direct access to different aspects of this kind of evaluation as follows:
_ modelling the measurement by describing the physical equations necessary to calculate the volume using the
gravimetric method of measurement;
_ determination of the standard uncertainty of measurement associated with the volume V20 by describing the
calculation procedure according to the GUM;
_ determination of the sensitivity coefficients with an example of the calculation of all sensitivity coefficients by
using complete equations, approximations of equations and by giving numerical values for standard
conditions;
_ determination of the standard uncertainty associated with the volume delivered by a piston-operated
volumetric apparatus giving the combination of the standard uncertainty associated with the volume V20
measured using the gravimetric measuring system and the experimental standard deviation associated with
the volume delivered by the apparatus;
_ determination of the standard uncertainties of measurement with a brief insight into the calculation of
uncertainties of measuring devices according to GUM;
_ determination of the expanded uncertainty of measurement associated with volume V20;
_ example of the determination of the uncertainty for volume measurements.
|
Withdrawn |
2000-11 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO/TR 20461:2023 |
Determination of uncertainty for volume measurements of a piston-operated volumetric apparatus using a gravimetric method |
This document gives detailed information regarding the evaluation of uncertainty for the gravimetric reference measurement procedure specified in ISO 8655-6[1] and the gravimetric procedure specified in ISO 8655-7:2022[1], Annex A, according to the ISO/IEC Guide 98-3[16].
This document also includes the determination of other uncertainty components related to the liquid delivery process of a piston-operated volumetric apparatus (POVA), e.g. repeatability and handling. Furthermore, it provides examples for the calculation and application of the uncertainty of the mean delivered volume and the uncertainty in use of a single delivered volume.
|
Published |
2023-02 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 21413:2005 |
Manual methods for the measurement of a groundwater level in a well |
ISO 21413:2005 develops procedures and prescribes the minimum accuracy required of water-level measurements made in wells using graduated steel tapes, electric tapes and air lines. Procedures and accuracy requirements for measuring water levels in a flowing well are also included, as are procedures required to establish a permanent measuring point. ISO 21413:2005 discusses the advantages and limitations of each method and requirements for recording the data. ISO 21413:2005 does not include methods that use automated electrical or mechanical means to measure and record water levels.
|
Published |
2005-10 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 23783-2:2022 |
Automated liquid handling systems — Part 2: Measurement procedures for the determination of volumetric performance |
This document specifies procedures for the determination of volumetric performance of automated liquid handling systems (ALHS), including traceability and estimations of measurement uncertainty of measurement results.
This document is applicable to all ALHS with complete, installed liquid handling devices, including tips and other essential parts needed for delivering a specified volume, which perform liquid handling tasks without human intervention into labware.
NOTE For terminology and general requirements of automated liquid handling systems, see ISO 23783-1. Determination, specification, and reporting of volumetric performance of automated liquid handling systems is described in ISO 23783-3.
|
Published |
2022-08 |
Edition : 1 |
Number of pages : 77 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
71.040.20
Laboratory ware and related apparatus
|
| ISO 23783-3:2022 |
Automated liquid handling systems — Part 3: Determination, specification and reporting of volumetric performance |
This document provides guidance and establishes requirements for collecting and examining volumetric performance data of automated liquid handling systems (ALHS). It specifies how to index and track volumetric performance data and provides descriptive statistics for the evaluation of these data. This document also specifies reporting requirements of ALHS volumetric performance.
This document is applicable to all ALHS with complete, installed liquid handling devices, including tips and other essential parts needed for delivering a specified volume, which perform liquid handling tasks without human intervention into labware.
NOTE For terminology and general requirements of automated liquid handling systems, see ISO 23783-1. Measurement procedures for the determination of volumetric performance are given in ISO 23783-2.
|
Published |
2022-08 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
17.060
Measurement of volume, mass, density, viscosity
;
71.040.20
Laboratory ware and related apparatus
|
| ISO 91-1:1982 |
Petroleum measurement tables — Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F |
|
Withdrawn |
1982-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 91-1:1992 |
Petroleum measurement tables — Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F |
IS0 91-1:1992 refers to petroleum measurement tables published by the American Petroleum Institute (API, USA), the American Society for Testing and Materials (ASTM, USA) and the Institute of Petroleum (IP, UK) and subsidiary documents, correcting the printing errors in these publications, based on reference temperatures of 15 °C and 60 °F.
The standard reference temperature for petroleum measurement adopted in IS0 5024 is 15 °C, and should be used for international trade. However, it is recognized that its use is not yet universally accepted and references to tables based on 60 °F have therefore been included in IS0 91-1:1992 and tables based on 20 °C are covered in IS0 91-2.
|
Withdrawn |
1992-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 91-2:1991 |
Petroleum measurement tables — Part 2: Tables based on a reference temperature of 20 degrees C |
Refers to computer implementation procedures for the correction of densities and volumes to the reference temperature of 20°C. This first edition cancels and replaces ISO/TR 91:1970/Add.1:1975. Annex A is for information only.
|
Withdrawn |
1991-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/WD 3171 |
Petroleum liquids — Automatic pipeline sampling |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
75.080
Petroleum products in general
;
75.180.30
Volumetric equipment and measurements
|
| ISO 91:2017 |
Petroleum and related products — Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions |
ISO 91:2017 refers to temperature volume correction factors, which allow users to convert volumes, measured at ambient conditions, to those at reference conditions for transactional purposes. This document also refers to compressibility factors required to correct hydrocarbon volumes measured under pressure to the corresponding volumes at the equilibrium pressure for the measured temperature.
|
Published |
2017-05 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/R 91:1970 |
Withdrawal of ISO/R 91-1970 |
|
Withdrawn |
1970-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/R 91:1970/Add 1:1975 |
Withdrawal of ISO/R 91-1970 — Addendum 1 |
|
Withdrawn |
1975-07 |
Edition : 1 |
Number of pages : 79 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 2714:1980 |
Liquid hydrocarbons — Volumetric measurement by displacement meter systems other than dispensing pumps |
Gives the characteristics of such equipment and rules for systematically applying appropriate consideration to the nature of the liquids to be measured, to the installation of a metering system, and to the selection, performance, operation and maintenance of the same.
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 2714:2017 |
Liquid hydrocarbons — Volumetric measurement by displacement meter |
ISO 2714:2017 describes and discusses the characteristics of displacement flowmeters. Attention is given to the factors to be considered in the application of positive displacement meters to liquid metering. These include the properties and nature of the liquid to be metered, the correct installation and operation of the meter, environmental effects, and the wide choice of secondary and ancillary equipment. Aspects of meter proving and maintenance are also discussed.
ISO 2714:2017 is applicable to the metering of any appropriate liquid. Guidance is given on the use of positive displacement meters in the metering of two-component mixtures of the same phase such as water and oil.
It is not applicable to two-phase flow when gases or solids are present under metering conditions (i.e. two-phase flow). It can be applied to the many and varied liquids encountered in industry for liquid metering only. It is not restricted to hydrocarbons.
Guidance on the performance expected for fiscal/custody transfer applications for hydrocarbons is outlined.
ISO 2714:2017 is not applicable to cryogenic liquids such as liquefied natural gas (LNG) and refrigerated petroleum gas. It does not cover potable water and fuel dispenser applications.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 36 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 2715:1981 |
Liquid hydrocarbons — Volumetric measurement by turbine meter systems |
Gives the characteristics of such equipment and rules for systematically applying appropriate consideration to the nature of the liquids to be measured, to the installation of a metering system, and to the selection, performance, operation and maintenance of the same.
|
Withdrawn |
1981-08 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 2715:2017 |
Liquid hydrocarbons — Volumetric measurement by turbine flowmeter |
ISO 2715:2017 describes and discusses the characteristics of turbine flowmeters. Attention is given to the factors to be considered in the application of turbine meters to liquid metering. These include the properties and nature of the liquid to be metered, the correct installation and operation of the meter, environmental effects, and the wide choice of secondary and ancillary equipment. Aspects of meter proving and maintenance are also discussed.
ISO 2715:2017 is applicable to the metering of any appropriate liquid. Guidance is given on the use of turbine meters in the metering of two-component liquid mixtures such as water and oil.
It is not applicable to two-phase flow when gases or solids are present under metering conditions (i.e. two-phase flow). It can be applied to the many and varied liquids encountered in industry for liquid metering and is not restricted to hydrocarbons.
Guidance on the performance expected for fiscal/custody transfer applications for hydrocarbons is outlined.
ISO 2715:2017 is not applicable to cryogenic liquids, such as liquefied natural gas (LNG) and refrigerated petroleum gas. It does not cover potable water applications.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 38 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 3171:1975 |
Petroleum products — Liquid hydrocarbons — Automatic pipeline sampling |
|
Withdrawn |
1975-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
75.080
Petroleum products in general
;
75.180.30
Volumetric equipment and measurements
|
| ISO 3171:1988 |
Petroleum liquids — Automatic pipeline sampling |
Recommends procedures for crude oil and liquid petroleum products being conveyed by pipeline. Does not apply to liquefied petroleum gases and liquefied natural gases. The principal purpose ist to give guidelines for specifying, testing, operating, maintaining and monitoring crude oil samples.
|
Published |
1988-12 |
Edition : 2 |
Number of pages : 55 |
Technical Committee |
75.080
Petroleum products in general
;
75.180.30
Volumetric equipment and measurements
|
| IEC 975:1989 |
Microprocessor universal format for object modules |
|
Withdrawn |
1989-08 |
Edition : 1 |
Number of pages : 71 |
Technical Committee |
35.160
Microprocessor systems
|
| ISO 4124:1994 |
Liquid hydrocarbons — Dynamic measurement — Statistical control of volumetric metering systems |
In dynamic measuring systems the performance of meters for liquid hydrocarbons will vary with changes in flow conditions, viz. flowrate, viscosity, temperature, pressure, density of product, and with mechanical wear. Has been prepared as a guide for establishing and monitoring the performance of such meters, using appropriate statistical control procedures for both central and on-line proving. These procedures may be applied to measurements made by any type of volumetric or mass metering systems. The procedures to be followed for collecting data, on which the control limits are based, are described.
|
Published |
1994-12 |
Edition : 1 |
Number of pages : 85 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4266-1:2002 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks |
ISO 4266-1 gives guidance on the accuracy, installation, commissioning, calibration and verification of automatic level gauges (ALGs), of both intrusive and non-intrusive types, for measuring the level of petroleum and petroleum products having a Reid vapour pressure less than 100 kPa, stored in atmospheric storage tanks.
This part of ISO 4266 is not applicable to the measurement of level in refrigerated storage tanks with ALG equipment.
|
Published |
2002-11 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/PRF 4266-1 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks |
ISO 4266-1 gives guidance on the accuracy, installation, commissioning, calibration and verification of automatic level gauges (ALGs), of both intrusive and non-intrusive types, for measuring the level of petroleum and petroleum products having a Reid vapour pressure less than 100 kPa, stored in atmospheric storage tanks.
This part of ISO 4266 is not applicable to the measurement of level in refrigerated storage tanks with ALG equipment.
|
Under development |
2023-06 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4266-2:2002 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels |
ISO 4266-2 gives guidance on the accuracy, installation, calibration and verification of automatic level gauges (ALGs), both intrusive and non-intrusive, for measuring the level of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, transported aboard marine vessels (i.e. tankers and barges).
ISO 4266-2 gives guidance for buyers and sellers who mutually agree to use marine ALGs for either fiscal and/or custody transfer applications.
ISO 4266-2 is not applicable to the measurement of level in refrigerated cargo tanks.
|
Published |
2002-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/DIS 4266-2 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels |
ISO 4266-2 gives guidance on the accuracy, installation, calibration and verification of automatic level gauges (ALGs), both intrusive and non-intrusive, for measuring the level of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, transported aboard marine vessels (i.e. tankers and barges).
ISO 4266-2 gives guidance for buyers and sellers who mutually agree to use marine ALGs for either fiscal and/or custody transfer applications.
ISO 4266-2 is not applicable to the measurement of level in refrigerated cargo tanks.
|
Under development |
|
Edition : 2 |
Number of pages : 11 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4266-3:2002 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pressurized storage tanks (non-refrigerated) |
ISO 4266-3 gives guidance on the accuracy, installation, commissioning, calibration and verification of automatic level gauges (ALGs) both intrusive and non-intrusive, for measuring the level of petroleum and petroleum products having a vapour pressure less than 4 MPa, stored in pressurized storage tanks.
ISO 4266-3 gives guidance on the use of ALGs in custody transfer application.
ISO 4266-3 is not applicable to the measurement of level in caverns and refrigerated storage tanks with ALG equipment.
|
Published |
2002-11 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4266-4:2002 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks |
ISO 4266-4 gives guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (ATTs) in fiscal/custody transfer applications in which the ATT is used for measuring the temperature of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, stored in atmospheric storage tanks.
ISO 4266-4 is not applicable to the measurement of temperature in caverns or in refrigerated storage tanks.
|
Published |
2002-11 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 13739:2010 |
Petroleum products — Procedures for transfer of bunkers to vessels |
ISO 13739:2010 specifies procedures and requirements for the transfer of bunkers to vessels involving bunker tankers, road tankers and shore pipelines. It applies to pre-delivery, delivery and post-delivery checks and documentation.
|
Withdrawn |
2010-01 |
Edition : 1 |
Number of pages : 42 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/DIS 4266-4 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks |
ISO 4266-4 gives guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (ATTs) in fiscal/custody transfer applications in which the ATT is used for measuring the temperature of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, stored in atmospheric storage tanks.
ISO 4266-4 is not applicable to the measurement of temperature in caverns or in refrigerated storage tanks.
|
Under development |
|
Edition : 2 |
Number of pages : 14 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4266-5:2002 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 5: Measurement of temperature in marine vessels |
ISO 4266-5 gives guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (ATTs) in fiscal/custody transfer applications in which the ATT is used for measuring the temperature of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, stored in cargo tanks on board marine vessels.
ISO 4266-5 is not applicable to the measurement of temperature in refrigerated storage tanks, or pressurized cargo tanks on board marine vessels.
|
Published |
2002-11 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4266-6:2002 |
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated) |
ISO 4266-6 gives guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (ATTs) in fiscal/custody transfer applications in which the ATT is used for measuring the temperature of petroleum and liquid petroleum products stored in pressurized storage tanks.
ISO 4266-6 is not applicable to the measurement of temperature in caverns or in refrigerated storage tanks.
|
Published |
2002-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4266:1994 |
Petroleum and liquid petroleum products — Measurement of temperature and level in storage tanks — Automatic methods |
Gives guidance on the selection, specification, installation, operation and maintenance of mechanical and servo-operated automatic tank gauging systems measuring level and temperature in petroleum storage tanks which are at or near atmospheric temperature and pressure, or used under pressure, or for the storage of heated liquid petroleum products. Does not apply to tank gauging systems using other sensing principles, such as radar and optical methods. Does not apply to level and temperature measurement systems for refrigerated hydrocarbon liquids.
|
Withdrawn |
1994-12 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4267-2:1988 |
Petroleum and liquid petroleum products — Calculation of oil quantities — Part 2: Dynamic measurement |
Defines the various terms employed in the calculation of metered petroleum quantities. Also specifies the equations which allow the values of correction factors to be computed. Also gives rules for the sequence, rounding and significant figures to be employed in a calculation. Provides tables which may be used to look up specific correction factors should it not be desired to calculate them by manual as well as computer methods. The field of application is the volumetric measurement of liquid hydrocarbons, including liquefied petroleum gases, by meter and prover. It does not include two-phase fluids.
|
Published |
1988-12 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4268:2000 |
Petroleum and liquid petroleum products — Temperature measurements — Manual methods |
|
Published |
2000-09 |
Edition : 1 |
Number of pages : 32 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4269:2001 |
Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters |
This International Standard specifies a method for the calibration of tanks by addition of batches of liquid. The liquid is
used as a volume-transfer medium, measured accurately by means of a meter.
This International Standard is not applicable to the calibration of reference measuring instruments, proving tanks, or
meter provers.
NOTE Applicable standards are given in the bibliography.
|
Published |
2001-03 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 4512:2000 |
Petroleum and liquid petroleum products — Equipment for measurement of liquid levels in storage tanks — Manual methods |
This International Standard specifies the requirements for the equipment required to measure manually the liquid
level or the corresponding volume of petroleum and petroleum products stored in tanks and containers.
|
Published |
2000-12 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 5024:1976 |
Petroleum liquids and gases — Measurement — Standard reference conditions |
|
Withdrawn |
1976-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 5024:1999 |
Petroleum liquids and liquefied petroleum gases — Measurement — Standard reference conditions |
|
Withdrawn |
1999-05 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 6551:1982 |
Petroleum liquids and gases — Fidelity and security of dynamic measurement — Cabled transmission of electric and/or electronic pulsed data |
Establishes guidelines for ensuring the quantities stated, a main objective being to ensure the integrity of the primary indication. In order to achieve different levels of security, criteria and recommendations for the design, installation, use and maintenance of the relevant equipment are laid down. Regulatory requirements, including those for safety, are not specifically covered in detail but certain general cautionary notes on safety are included for guidance.
|
Published |
1982-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 6578:1991 |
Refrigerated hydrocarbon liquids — Static measurement — Calculation procedure |
Specifies the calculations to be made to adjust the volume of a liquid from the conditions at measurement to the equivalent volume of liquid or vapour at a standard temperature and pressure, or to the equivalent mass or energy (calorific content). Annexes A to H form an integral part of this standard.
|
Withdrawn |
1991-11 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 6578:2017 |
Refrigerated hydrocarbon liquids — Static measurement — Calculation procedure |
ISO 6578:2017 specifies the calculation procedure to convert the volume of liquefied petroleum gas (LPG) and liquefied natural gas (LNG) under the conditions at the time of measurement to the equivalent volume of liquid or vapour at the standard condition, i.e. 15 °C and 101,325 kPaA, or to the equivalent mass or energy (calorific content). It applies to the quantities of refrigerated hydrocarbon liquids stored in or transferred to/from tanks and measured under static storage conditions. Calculation of pressurized gases is out of the scope of ISO 6578:2017.
|
Published |
2017-10 |
Edition : 2 |
Number of pages : 25 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/DIS 6919 |
Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Dynamic measurement of liquefied natural gas (LNG) as marine fuel — Truck-to-ship (TTS) bunkering |
The proposed document defines procedures and requirements for transporting liquefied natural gas(LNG) from trucks to ships (TTS) using the combination of Coriolis mass flowmeter (MFM) and gaschromatograph (GC). It also gives guidance for portable packaging of the combination system in mobileform which minimizes facility storage space and streamline the use of development systems. Outputfrom the system in calorie units is applicable to commercial transactions between suppliers and usersof liquefied natural gas (LNG) as marine fuel.The proposed document consists of definitions of related terms, abbreviations, general requirements,metrological requirements, system flawless requirements, requirements and test methods, procedures,and appendices for measurement methods.
|
Under development |
|
Edition : 1 |
Number of pages : 31 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/DIS 6963 |
Bunker cargo loading from oil terminal to bunker tanker using Coriolis mass flow meter |
|
Under development |
|
Edition : 1 |
Number of pages : 29 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/DIS 6996 |
Bunkering - Meter verification using master Coriolis mass flow meter |
|
Under development |
|
Edition : 1 |
Number of pages : 16 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7278-1:1987 |
Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 1: General principles |
The purpose of proving a meter is to determine its relative error or its meter factor as a function of flow rate and other parameters such as temperature, pressure and viscosity. The following types of proving systems are in use: tank prover systems; pipe provers, bidirectional and unidirectional; master meters. They can be used either connected (fixed or mobile) to the metering station or in a central proving station.
|
Published |
1987-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7278-2:1988 |
Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 2: Pipe provers |
Provides guidance for the design, installation and calibration of these provers. Calculation techniques for use when calibrating and operating provers are detailed in ISO 4267-2. Most of the material is general in that it applies to provers for use with different liquids and types of meters and for proving them in different services. Does not apply to the newer "small volume" or "compact" provers.
|
Withdrawn |
1988-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-2:2022 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2: Optical-reference-line method or electro-optical distance-ranging method |
This document specifies methods for the calibration of tanks above eight metres in diameter with cylindrical courses that are vertical. It provides two methods for determining the volumetric quantity of the liquid contained within a tank at gauged liquid levels.
NOTE For optical-reference-line method, the optical (offset) measurements required to determine the circumferences can be taken internally or externally, provided that insulation is removed if tank is insulated.
The methods are suitable for tilted tanks with up to 3 % deviation from the vertical provided that a correction is applied for the measurement tilt, as described in ISO 7507-1.
These methods are alternatives to other methods such as strapping (ISO 7507-1) and the optical-triangulation method (ISO 7507-3).
|
Published |
2022-03 |
Edition : 3 |
Number of pages : 28 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7278-2:2022 |
Petroleum measurement systems — Part 2: Pipe prover design, calibration and operation |
This document provides descriptions of the different types of pipe provers, otherwise known as displacement provers, currently in use. These include sphere (ball) provers and piston provers operating in unidirectional and bidirectional forms. It applies to provers operated in conventional, reduced volume, and small volume modes.
This document gives guidelines for:
— the design of pipe provers of each type;
— the calibration methods;
— the installation and use of pipe provers of each type;
— the interaction between pipe provers and different types of flowmeters;
— the calculations used to derive the volumes of liquid measured (see Annex A);
— the expected acceptance criteria for fiscal and custody transfer applications, given as guidance for both the calibration of pipe provers and when proving flowmeters (see Annex C).
This document is applicable to the use of pipe provers for crude oils and light hydrocarbon products which are liquid at ambient conditions. The principles apply across applications for a wider range of liquids, including water. The principles also apply for low vapour pressure, chilled and cryogenic products, however use with these products can require additional guidance.
|
Published |
2022-11 |
Edition : 2 |
Number of pages : 109 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7278-3:1986 |
Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 3: Pulse interpolation techniques |
|
Withdrawn |
1986-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7278-3:1998 |
Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 3: Pulse interpolation techniques |
|
Published |
1998-02 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7278-4:1999 |
Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 4: Guide for operators of pipe provers |
|
Withdrawn |
1999-04 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-1:1993 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 1: Strapping method |
Applies to tanks with cylindrical courses that are substantially vertical. Provides a method suitable for use as a working method, a reference method or a referee method for measuring a tank using a steel strapping tape. The operation of strapping, the corrections to be made and the calculations leading to the compilation of the tank capacity table are described. For tilted tanks with a deviation of up to 3 % from the vertical a correction may be applied that is described.
|
Withdrawn |
1993-07 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-1:2003 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 1: Strapping method |
ISO 7507-1:2003 specifies a method for the calibration of substantially vertical cylindrical tanks by measuring the tank using a strapping tape.
This method is known as the strapping method and is suitable for use as a working method, a reference method or a referee method.
The operation of strapping, the corrections to be made and the calculations leading to the compilation of the tank capacity table are described.
This method does not apply to abnormally deformed, e.g. dented or non-circular, tanks.
This method is suitable for tilted tanks with a deviation of up to 3 % from the vertical, provided that a correction for the measured tilt is applied in the calculations.
|
Published |
2003-12 |
Edition : 2 |
Number of pages : 62 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-2:1993 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2: Optical-reference-line method |
Applies to tanks above 8 m in diameter with cylindrical courses that are substantially vertical. Provides a method for determining the volumetric quantity contained within a tank at gauged liquid levels using an optical plummet. The measurement required to determine the circumference may be made internally or externally. For tilted tanks with a deviation of up to 3 % from the vertical a correction as described in ISO 7507-1 may be applied.
|
Withdrawn |
1993-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-2:2005 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2: Optical-reference-line method |
ISO 7507-2:2005 specifies a method for the calibration of tanks above eight metres in diameter with cylindrical courses that are substantially vertical. It provides a method for determining the volumetric quantity contained within a tank at gauged liquid levels.
The optical (offset) measurements required to determine the circumferences can be taken internally or externally.
The method specified in ISO 7507-2:2005 is suitable for tilted tanks with up to 3 % deviation from the vertical provided that a correction is applied for the measurement tilt, as described in ISO 7507-1.
This method is an alternative to other methods such as strapping (ISO 7507-1) and the optical-triangulation method (ISO 7507-3).
|
Withdrawn |
2005-06 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 9091-1:1991 |
Refrigerated light-hydrocarbon fluids — Calibration of spherical tanks in ships — Part 1: Stereo-photogrammetry |
Describes a stereo-photogrammetric procedure for the internal measurement of spherical tanks. Lays down the calculation procedures for compiling the calibration tables.
|
Withdrawn |
1991-10 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-3:1993 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 3: Optical-triangulation method |
Applies to tanks above 8 m in diameter with cylindrical courses that are substantially vertical. Provides a method for determining the volumetric quantity contained within a tank at gauged liquid levels by optical triangulation using theodolites and laser beams. The measurement required to determine the radius may be made internally or externally. The external method is applicable only to tanks that are free of insulation. For tilted tanks with a deviation of up to 3 % from the vertical a correction as described in ISO 7507-1 may be applied.
|
Withdrawn |
1993-07 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-3:2006 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 3: Optical-triangulation method |
ISO 7507-3:2006 specifies a calibration procedure for application to tanks above 8 m in diameter with cylindrical courses that are substantially vertical. It provides a method for determining the volumetric quantity contained within a tank at gauged liquid levels. The measurements required to determine the radius are made either internally or externally. The external method is applicable only to tanks that are free of insulation.
ISO 7507-3:2006 is suitable for tanks tilted up to a 3 % deviation from the vertical, provided that a correction is applied for the measured tilt as described in ISO 7507-1.
|
Published |
2006-07 |
Edition : 2 |
Number of pages : 38 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-4:1995 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 4: Internal electro-optical distance-ranging method |
Specifies a method for the calibration of vertical cylindrical tanks having diameters greater than 5 m by means of internal measurements using an electro-optical distance-ranging instrument (EODR), and for the subsequent compilation of tank capacity tables. Not applicable to the calibration of abnormally deformed tanks or of noncircular tanks. Applicable to tanks tilted by <= 3 % from the vertical, provided a correction is applied for the measured tilt. Applicable to tanks with cone-up or cone-down bottoms, as well as to tanks with flat bottoms.
|
Withdrawn |
1995-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-4:2010 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 4: Internal electro-optical distance-ranging method |
ISO 7507-4:2010 specifies a method for the calibration of vertical cylindrical tanks having diameters greater than 5 m by means of internal measurements using an electro-optical distance-ranging (EODR) instrument, and for the subsequent compilation of tank capacity tables.
ISO 7507-4:2010 is suitable for tanks tilted up to a 3 % deviation from the vertical, provided that a correction is applied for the measured tilt as described in ISO 7507-1:2003, Clause 11.
ISO 7507-4:2010 also applies to tanks with floating roofs or internal floating blankets.
|
Published |
2010-02 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 7507-5:2000 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 5: External electro-optical distance-ranging method |
This part of ISO 7507 specifies a method for the calibration of non-insulated vertical cylindrical tanks having
diameters greater than 5 m, by means of external measurement using an electro-optical distance-ranging method
(EODR), and for the subsequent compilation of tank capacity tables.
This part of ISO 7507 is applicable to tanks with cone-up or cone-down bottoms as well as to tanks with flat
bottoms.
|
Published |
2000-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO/TR 7507-6:1997 |
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 6: Recommendations for monitoring, checking and verification of tank calibration and capacity table |
|
Withdrawn |
1997-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 8222:1987 |
Petroleum measurement systems — Calibration — Temperature corrections for use with volumetric reference measuring systems |
Gives multiplication factors for the correction of the volume of water transferred from a primary measure to a tank for differences in volume arising from temperature differences during the determination of the capacity of the tank at a reference temperature. The corrections apply for temperatures in the range O,O5 to 45 °C, but the difference between the temperature of the measure and of the tank shall not be more than 5,0 °C, unless otherwise specified in the calibration procedure.
|
Withdrawn |
1987-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|
| ISO 8222:2002 |
Petroleum measurement systems — Calibration — Temperature corrections for use when calibrating volumetric proving tanks |
ISO 8222 specifies multiplication factors for the correction of the volume of water transferred from a primary measure to a tank for changes arising from temperature differences during the determination of the capacity of the tank at reference temperature.
|
Withdrawn |
2002-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
75.180.30
Volumetric equipment and measurements
|