| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 6580:1981 |
General purpose industrial fans — Circular flanges — Dimensions |
Specifies the dimensions of circular flanges for industrial fans. It does not apply to heavy duty types with greater flange thickness. It adopts the R 20 Series as per ISO 497.
|
Withdrawn |
1981-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
|
| ISO 27127:2014 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification |
ISO 27127:2014 specifies requirements for two types of thermoplastic multi-layer (non-vulcanized) transfer hoses and hose assemblies for carrying liquefied petroleum gas and liquefied natural gas. Each type is subdivided into two classes, one for onshore duties, and the other for offshore.
Class A hose is for use onshore.
Class B hose is for use offshore.
ISO 27127:2014 is applicable for hose sizes from 25 mm to 250 mm, working pressures from 10,5 bar to 25 bar and operating temperatures from -196 °C to +45 °C, according to class.
|
Withdrawn |
2014-07 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 27127:2021 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification |
This document specifies requirements for two types of thermoplastic multi-layer (non-vulcanized) transfer hoses and hose assemblies for carrying liquefied petroleum gas and liquefied natural gas. Each type is subdivided into two classes, one for onshore duties, and the other for offshore.
— Class A hose is for use onshore.
— Class B hose is for use offshore.
This document is applicable for hose sizes from 25 mm to 250 mm, working pressures from 10,5 bar to 25 bar and operating temperatures from −196 °C to +45 °C, according to class.
NOTE Offshore liquefied natural gas (LNG) hose assemblies are also specified in EN 1474-2. EN 1474-2 does not only specify offshore use, but also ship to shore and other LNG transfer applications.
|
Published |
2021-11 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 28460:2010 |
Petroleum and natural gas industries — Installation and equipment for liquefied natural gas — Ship-to-shore interface and port operations |
ISO 28460:2010 specifies the requirements for ship, terminal and port service providers to ensure the safe transit of an LNG carrier through the port area and the safe and efficient transfer of its cargo. It is applicable to
pilotage and vessel traffic services (VTS);
tug and mooring boat operators;
terminal operators;
ship operators;
suppliers of bunkers, lubricants and stores and other providers of services whilst the LNG carrier is moored alongside the terminal.
ISO 28460:2010 includes provisions for
a ship's safe transit, berthing, mooring and unberthing at the jetty;
cargo transfer;
access from jetty to ship;
operational communications between ship and shore;
all instrumentation, data and electrical connections used across the interface, including OPS (cold ironing), where applicable;
the liquid nitrogen connection (where fitted);
ballast water considerations.
ISO 28460:2010 applies only to conventional onshore LNG terminals and to the handling of LNGC's in international trade. However, it can provide guidance for offshore and coastal operations.
|
Published |
2010-12 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 6708:1980 |
Pipe components — Definition of nominal size |
|
Withdrawn |
1980-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
23.040
Pipeline components and pipelines
|
| ISO 1823-1:1997 |
Rubber hoses and hose assemblies — Part 1: On-shore oil suction and discharge — Specification |
|
Withdrawn |
1997-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 1823-2:1997 |
Rubber hoses and hose assemblies — Part 2: Ship/dockside discharge — Specification |
|
Withdrawn |
1997-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 1823:1975 |
Rubber hoses for oil suction and discharge |
|
Withdrawn |
1975-03 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 1823:2015 |
Rubber hose and hose assemblies for oil suction and discharge service — Specification |
ISO 1823:2015 specifies the characteristics of four types of oil suction and discharge hose assemblies used for the conveyance of petroleum, including crude oils and other liquid petroleum products. Each type being divided into three classes depend on the aromatic contents. It is not suitable for liquefied petroleum gas and natural gas.
Hose assemblies to ISO 1823:2015 can be used in the temperature range −20 °C to 80 °C.
The hoses specified are in the range of nominal size 50 to 500 and can be types of smooth bore, rough bore, armoured rough bore, and light weight.
|
Published |
2015-02 |
Edition : 2 |
Number of pages : 22 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 2229:1973 |
Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions |
|
Withdrawn |
1973-12 |
Edition : 1 |
Number of pages : 54 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 2928:2003 |
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) — Specification |
ISO 2928:2003 specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 25 bar (2,5 MPa) within the temperature range -30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range -50 °C to +70 °C.
|
Withdrawn |
2003-08 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 2928:2021 |
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) — Specification |
This document specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 2,5 MPa (25 bar) within the temperature range −30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C.
|
Published |
2021-01 |
Edition : 4 |
Number of pages : 12 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 2929:1975 |
Rubber hose for fuel truck delivery |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 2929:1991 |
Rubber hoses for bulk fuel truck delivery — Specification |
|
Withdrawn |
1991-06 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 2929:2002 |
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification |
ISO 2929:2002 specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar (1,0 MPa).
Both groups of hoses are designed for:
use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds;operation within the temperature range of -30 °C to +70 °C, undamaged by climatic conditions of -50 °C to +70 °C when stored in static conditions.
ISO 2929:2002 is not applicable to hoses and hose assemblies for LPG systems, aviation fuel systems, fuel station systems or marine applications.
|
Withdrawn |
2002-10 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 2929:2014 |
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification |
ISO 2929:2014 specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar (1,0 MPa).
Both groups of hoses are designed for:
a) use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds;
b) operation within the temperature range of − 30 °C to + 70 °C, undamaged by climatic conditions of − 50 °C to + 70 °C when stored in static conditions.
|
Withdrawn |
2014-03 |
Edition : 4 |
Number of pages : 15 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 2929:2021 |
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification |
This document specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 1,0 MPa (10 bar).
Both groups of hoses are designed for
a) use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds, and
b) operation within the temperature range of −30 °C to +70 °C, undamaged by climatic conditions of −50 °C to +70 °C when stored in static conditions.
NOTE Hoses for use at temperatures lower than −30 °C can be the subject of discussion between manufacturer and end user.
This document is not applicable to hoses and hose assemblies for LPG systems, aviation fuel systems, fuel station systems or marine applications.
|
Published |
2021-09 |
Edition : 5 |
Number of pages : 14 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 3183-1:1996 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
|
Withdrawn |
1996-10 |
Edition : 1 |
Number of pages : 111 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 6580:2005 |
General-purpose industrial fans — Circular flanges — Dimensions |
ISO 6580:2005 specifies the dimensions of circular flanges for general-purpose industrial fans
|
Withdrawn |
2005-02 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
|
| ISO 3183-2:1996 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
Specifies the technical delivery conditions for unalloyed and alloyed seamless and welded steel pipes. Includes quality and testing requirements. Applies for pipes which are normally used for the transmission of combustible fluids. Does not apply for cast steel pipes. Replaces the first edition.
|
Withdrawn |
1996-03 |
Edition : 1 |
Number of pages : 48 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 3183-3:1999 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
|
Withdrawn |
1999-04 |
Edition : 1 |
Number of pages : 54 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 3183-3:1999/Cor 1:2000 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C — Technical Corrigendum 1 |
|
Withdrawn |
2000-03 |
Edition : 1 |
|
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 3183:1980 |
Oil and natural gas industries — Steel line pipe |
|
Withdrawn |
1980-09 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 3183:2007 |
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems |
ISO 3183:2007 specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.
ISO 3183:2007 is not applicable to cast pipe.
|
Withdrawn |
2007-03 |
Edition : 2 |
Number of pages : 143 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 3183:2012 |
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems |
ISO 3183:2012 specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.
ISO 3183:2012 is not applicable to cast pipe.
|
Withdrawn |
2012-11 |
Edition : 3 |
Number of pages : 179 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 3183:2012/Amd 1:2017 |
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
— Amendment 1 |
|
Withdrawn |
2017-11 |
Edition : 3 |
Number of pages : 16 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 3183:2019 |
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems |
This document specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.
This document supplements API Spec 5L, 46th edition (2018), the requirements of which are applicable with the exceptions specified in this document.
This document is not applicable to cast pipe.
|
Published |
2019-10 |
Edition : 4 |
Number of pages : 23 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO/DIS 3845 |
Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service |
|
Under development |
|
Edition : 1 |
Number of pages : 54 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 4437-1:2014 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General |
ISO 4437-1:2014 specifies the general properties of polyethylene (PE) compounds for the manufacture of pipes and fittings intended to be used for the supply of gaseous fuels.
It also specifies the test parameters for the test methods referred to in this International Standard.
In conjunction with ISO 4437-2, ISO 4437-3, ISO 4437-4, and ISO 4437-5, it is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions: the maximum operating pressure (MOP) is based on the design stress determined from the compound minimum required strength (MRS) divided by the C factor, and taking into account rapid crack propagation (RCP) requirements; and a temperature of 20 °C is taken as reference temperature for the design basis.
|
Published |
2014-01 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 4437-2:2014 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes |
ISO 4437-2:2014 specifies the characteristics of pipes made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels.
It also specifies the test parameters for the test methods referred to in this International Standard.
In conjunction with part of ISO 4437-1, ISO 4437-3, ISO 4437-4, and ISO 4437-5, it is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions: the maximum operating pressure (MOP) is based on the design stress determined from the compound minimum required strength (MRS) divided by the C factor, and taking into account rapid crack propagation (RCP) requirements; and a temperature of 20 °C is taken as reference temperature for the design basis.
ISO 4437-2:2014 covers three types of pipes: PE pipes (outside diameter dn) including any identification stripes; PE pipes with co-extruded layers on either or both the outside and/or inside of the pipe (total outside diameter dn), where all PE layers have the same MRS rating; and PE pipes (outside diameter dn) with a peelable and contiguous thermoplastics additional layer on the outside (coated pipe).
|
Published |
2014-01 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO/DIS 4437-2 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes |
|
Under development |
|
Edition : 2 |
Number of pages : 19 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 4437-3:2014 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings |
ISO 4437-3:2014 specifies the characteristics of fusion fittings made from polyethylene (PE) as well as of mechanical fittings for piping systems in the field of the supply of gaseous fuels.
It also specifies the test parameters for the test methods referred to in this part of ISO 4437.
In conjunction with ISO 4437‑1, ISO 4437‑2, ISO 4437‑4, and ISO 4437‑5, it is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions: the maximum operating pressure (MOP) is based on the design stress, determined from the compound minimum required strength (MRS) divided by the C factor, and taking into account rapid crack propagation (RCP) requirements; and a temperature of 20 °C is taken as reference temperature for the design basis.
ISO 4437-3:2014 is applicable for fittings of the following types: electrofusion socket fittings; electrofusion saddle fittings; spigot end fittings (for butt fusion using heated tools and electrofusion socket fusion); socket fusion fittings; and mechanical fittings.
|
Published |
2014-01 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO/DIS 4437-3 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings |
|
Under development |
|
Edition : 2 |
Number of pages : 31 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 4437-4:2015 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves |
ISO 4437-4:2015 specifies the characteristics of valves made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels.
It also specifies the test parameters for the test methods referred to in this part of ISO 4437.
|
Withdrawn |
2015-04 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 4437-4:2022 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves |
This document specifies the characteristics of valves made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels.
It is applicable to unidirectional and bi-directional isolating valves with spigot ends or electrofusion sockets intended to be fused with PE pipes or fittings conforming to ISO 4437−2 and ISO 4437‑3 respectively.
Valves made from materials other than PE, designed for the supply of gaseous fuels conforming to the relevant standards can be used in PE piping systems according to ISO 4437 series, provided that they have PE connections for butt fusion or electrofusion ends, including integrated material transition joints, conforming to ISO 4437-3.
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with parts 1, 2, 3 and 5 of the ISO 4437 series, this document is applicable to PE valves, their joints and to joints with components of PE and other materials intended to be used under the following conditions:
a) a maximum operating pressure (MOP) up to and including 10 bar[1] at a reference temperature of 20 °C for design purposes;
NOTE 1 For the purpose of this document and the references to ISO 8233, MOP is considered to be nominal pressure.
b) an operating temperature between −20 °C to 40 °C.
NOTE 2 For operating temperatures between 20 °C and 40 °C, derating coefficients are defined in ISO 4437‑5.
This document covers valve bodies designed for connection with pipes with a nominal outside diameter dn ≤ 400 mm.
[1] 1 bar = 0,1 MPa =105 Pa; 1 MPa = 1 N/mm2.
|
Published |
2022-11 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 9158:1988 |
Road vehicles — Nozzle spouts for unleaded gasoline |
Specifies the dimensions of nozzle spouts on pumps for refuelling road vehicles, and their filling rates. Applies to nozzle spouts for unleaded gasoline for road vehicles. The figure shows a nozzle spout with a spring for safe hooking in the tank filler opening. The dimensions apply also to nozzle spouts with cams or depressions for safe hooking.
|
Published |
1988-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 4437-5:2014 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system |
ISO 4437-5:2014 specifies the requirements of fitness for purpose of the polyethylene (PE) piping system to be used for the supply of gaseous fuels.
It specifies the definitions of electrofusion, socket fusion, butt fusion, and mechanical joints.
It specifies the method of preparation of test piece joints and the tests to be carried out on these joints for assessing the fitness for purpose of the system under normal and extreme conditions.
It specifies the test parameters for the test methods referred to in this part of ISO 4437.
In conjunction with ISO 4437‑1, ISO 4437‑2, ISO 4437‑3, and ISO 4437‑4, it is applicable to PE pipes, fittings, valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions: the maximum operating pressure (MOP) is based on the design stress, determined from the compound minimum required strength (MRS) divided by the C factor, and taking into account rapid crack propagation (RCP) requirements; and a temperature of 20 °C is taken as reference temperature for the design basis.
|
Published |
2014-01 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO/DIS 4437-5 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system |
|
Under development |
|
Edition : 2 |
Number of pages : 11 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 4437:1988 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification |
|
Withdrawn |
1988-01 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 4437:1997 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications |
|
Withdrawn |
1997-08 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 4437:1997/Cor 1:1999 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1 |
|
Withdrawn |
1999-11 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 4437:2007 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications |
ISO 4437:2007 specifies the general properties of the polyethylene (PE) compounds for the manufacture of pipes, the physical and mechanical properties of the pipes made from these compounds and the requirements for the marking of such pipes, intended to be used for the supply of gaseous fuels.
|
Withdrawn |
2007-06 |
Edition : 3 |
Number of pages : 22 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO/CD 5124 |
Installations and equipment for LNG — LNG railcar applications |
This document provides the design and operational requirements for transportation of LNG as cargo by railcar, including safety aspects under normal conditions and in case of events.
This document includes requirements for (at least):
- railcar coupling;
- hose vs loading arm;
- hose / arm draining;
- permissives and emergency shut-down functions;
- liquid detection on boil-off gas return line;
- leak / fire detection and management systems.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 5772-1:1986 |
Rubber hoses — Measured fuel dispensing — Part 1: Conventional petroleum based fuels — Specification |
|
Withdrawn |
1986-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 5772:1998 |
Rubber hoses and hose assemblies for measured fuel dispensing — Specification |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 5772:2015 |
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification |
ISO 5772:2015 specifies minimum requirements for three types of hoses in two categories and two classes of hose assemblies used for measured fuel dispensing, including oxygenated fuels (up to a maximum of 15 % oxygenated compounds).
The assemblies are intended for use at ambient temperatures between −30 °C and +55 °C for normal temperature class and −40 °C and +55 °C for low temperature class at a working pressure up to and including 16 bar (1,6 MPa).
NOTE 1 bar = 0,1 MPa.
|
Published |
2015-09 |
Edition : 2 |
Number of pages : 23 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 6447:1983 |
Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material |
Specification refers to operating temperatures up to 50 °C. Other requirements, particularly functional tests for the actual sealing materials, shall be specified in national standards. Applicable to joint rings for all pipeline materials including iron, steel, copper, plastics. The standard does not include joint rings made from cellular rubbers or with enclosed voids. 2 tables with general and optional requirements.
|
Withdrawn |
1983-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.50
Seals
;
91.140.40
Gas supply systems
|
| ISO 6448:1985 |
Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material |
Specifies requirements, but does not apply to the mentioned product with an aromatic content higher than 30 % and liquids polluted by petroleum traces. Other requirements shall be specified in national standards. Iron, steel, copper, plastics are included as pipeline materials. Not included are joint rings made of cellular rubbers. 2 tables with general and optional requirements.
|
Withdrawn |
1985-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.50
Seals
|
| ISO 6808:1984 |
Plastics hoses for suction and low-pressure discharge — Petroleum liquids — Specification |
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 6808:1999 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
|
Withdrawn |
1999-02 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 6808:2014 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
ISO 6808:2014 specifies the requirements for two types of polymer-reinforced thermoplastics hose and hose assembly for suction and discharge applications with kerosene, heating oil, diesel fuel, and lubricating oils in the temperature range -10 °C to +45 °C.
|
Published |
2014-07 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 6993-1:2006 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) |
ISO 6993-1:2006 specifies the requirements for pipes made of high-impact poly(vinyl chloride) (PVC-HI) intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range of 0 degrees Celsius up to and including +30 degrees Celsius and a maximum operating pressure of 1 bar (100 kPa).
It is applicable only to pipes manufactured from the high-impact PVC materials PVC-A, PVC-CPE and PVC-EPR. The pipes are suitable for those gases not containing potentially damaging components in such concentrations as to impair the properties of the pipe material.
|
Published |
2006-06 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 6993-2:2006 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) |
ISO 6993-2:2005 gives the requirements for non-end load-bearing fittings made of high-impact poly(vinyl chloride) (PVC-HI) intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range of 0 degrees Celsius up to and including +30 degrees Celsius and a maximum operating pressure of 200 mbar (20 kPa).
|
Published |
2006-06 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 6993-3:2006 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) |
ISO 6993-3:2006 gives the requirements for full-end load-resistant fittings and saddles made of high-impact poly(vinyl chloride) (PVC-HI) intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range of 0 degrees Celsius up to and including +30 degrees Celsius and a maximum operating pressure of 1 bar (100 kPa).
It is applicable only to fittings and saddles manufactured from the high-impact PVC materials PVC-A, PVC-CPE and PVC-EPR. It is applicable to joints with elastomeric sealing elements and of the solvent cement type. The fittings and saddles are suitable for those gases not containing potentially damaging components in such concentrations as to impair the properties of the fitting/saddle material.
|
Published |
2006-06 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 6993-4:2006 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation |
ISO 6993-4:2006 specifies a code of practice for the design, handling and installation of high-impact poly(vinyl chloride) (PVC-HI) pipes and fittings intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range of 0 degrees Celsius up to and including +30 degrees Celsius and a maximum operating pressure of 1 bar (100 kPa).
|
Published |
2006-06 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 6993:1990 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specification |
|
Withdrawn |
1990-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 6993:2001 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specifications |
|
Withdrawn |
2001-12 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 8085-1:2001 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools |
|
Withdrawn |
2001-09 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 8085-1:2001/Cor 1:2008 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools — Technical Corrigendum 1 |
|
Withdrawn |
2008-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 8085-2:2001 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
|
Withdrawn |
2001-09 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 8085-2:2001/Cor 1:2001 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 1 |
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 8085-2:2001/Cor 2:2008 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 2 |
|
Withdrawn |
2008-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 8085-3:2001 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings |
|
Withdrawn |
2001-09 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 8085-3:2001/Cor 1:2007 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 1 |
|
Withdrawn |
2007-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 8085-3:2001/Cor 2:2008 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 2 |
|
Withdrawn |
2008-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 9159:1988 |
Road vehicles — Nozzle spouts for leaded gasoline and diesel fuel |
Specifies the dimensions of nozzle spouts on pumps for refuelling road vehicles, and their filling rates. Applies to nozzle spouts for leaded gasoline and diesel fuel for road vehicles. The figure shows a nozzle spout with a spring for safe hooking in the tank filler opening. The dimensions apply also to nozzle spouts with cams or depressions for safe hooking.
|
Published |
1988-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 10420:1994 |
Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications |
Provides guidelines for the design, analysis, testing, storage, handling and installation of flexible pipe systems used in a variety of offshore oil production applications. Requirements are specified in API Recommended Practice 17B (API RP 17B), first edition, June 1 1988, which is adopted as ISO 10420. For the purposes of international standardization, however, modifications shall apply to specific clauses and paragraphs of publication API RP 17B. These modifications are outlined.
|
Withdrawn |
1994-04 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 10464:2004 |
Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing |
ISO 10464:2004 specifies the intervals and inspection and testing procedures for the periodic inspection of refillable welded steel dedicated LPG cylinders of water capacity from 0,5 l up to and including 150 l.
It applies to cylinders protected by a system to prevent external corrosion and designed and manufactured in accordance with ISO 4706, ISO 22991 or an equivalent design and construction standard. ISO 10464 may also apply to other refillable welded steel cylinder designs for LPG with the approval of the national authority. Cylinders for the on-board storage of LPG as a fuel for vehicles are excluded from the standard, except cylinders used for fork-lift truck applications.
|
Published |
2004-08 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.020.35
Gas cylinders
|
| ISO/TR 10837:1991 |
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings |
Specifies a method of measuring the oxidative thermal stability in oxygen at typical processing and welding temperatures. The thermal stability measured by this method depends on mass and size of the test specimen used.
|
Withdrawn |
1991-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 10838-1:2000 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm |
|
Withdrawn |
2000-06 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 10838-2:2000 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm |
|
Withdrawn |
2000-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 10838-3:2001 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm |
|
Withdrawn |
2001-04 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO/TS 10839:2000 |
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation |
This Technical Specification presents a code of practice dealing with polyethylene (PE) pipes and fittings for buried
pipeline systems outside buildings and designed to distribute gaseous fuels within the temperature range ? 20 °C to
+ 40 °C and gives appropriate temperature-related requirements.
The code of practice covers mains and service lines whose components are prepared for jointing by scraping
and/or machining, and gives instructions for the design, storage, handling, transportation, laying conditions and
fusion quality control of PE pipes and fittings up to and including 630 mm outside diameter, as well as subsequent
joint testing, backfilling, pipe system testing, commissioning and decommissioning.
The jointing methods covered by this Technical Specification are heated-tool fusion jointing (butt, socket and
saddle fusion), electrofusion jointing and mechanical jointing.
No special precautions are necessary for areas exposed to the influence of mining and earthquakes other than
those precautions mentioned in this code of practice.
Existing and new national regulations take precedence over this Technical Specification.
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 35 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 12176-2:2000 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion |
|
Withdrawn |
2000-05 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO/TS 10839:2022 |
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation |
This document presents a code of practice dealing with polyethylene (PE) pipes and fittings for buried pipeline systems outside buildings, conforming to the ISO 4437 series, and designed to transport gaseous fuels [as defined in ISO 4437-1, e.g. methane, liquified petroleum gas (LPG), manufactured gas and hydrogen] within the temperature range –20 °C to +40 °C. This document also gives appropriate temperature-related requirements.
The code of practice covers mains and service lines whose components are prepared for fusion or mechanical jointing. It also gives instructions for the design, storage, handling, transportation, laying conditions and fusion quality control of PE pipes and fittings as well as subsequent joint testing, backfilling, pipe system testing and commissioning.
NOTE For the renovation code of practice, reference is made to the ISO 11299 series and to ISO 11295 for classification and to the ISO 21225 series for further information for trenchless replacement.
The minimal requirements for the jointing methods are given in:
— Annex A (butt fusion);
— Annex B (electrofusion); and
— Annex C (mechanical jointing).
In some countries the use of heated-tools socket and saddle fusion is permitted; information on heated-tools fusion jointing techniques is given in Annex D.
In the case of ground movement or shaking (e.g. earthquakes, etc.) it can be necessary to implement precautions mentioned in this document following guidelines provided by authorities (e.g. Eurocode 8,[7] EN 12007-1:2012, Annex A,[8] etc.),
Workers' health and safety issues are outside the scope of this document.
|
Published |
2022-07 |
Edition : 2 |
Number of pages : 33 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 10933:1997 |
Polyethylene (PE) valves for gas distribution systems |
|
Withdrawn |
1997-11 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.30
Plastics pipes and fittings for non fluid use
|
| ISO 11299-1:2011 |
Plastics piping systems for renovation of underground gas supply networks — Part 1: General |
|
Withdrawn |
2011-09 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 11299-1:2018 |
Plastics piping systems for renovation of underground gas supply networks — Part 1: General |
This document specifies the requirements and test methods for plastics piping systems intended to be used for the renovation of underground gas supply networks. It is applicable to pipes and fittings, as manufactured, as well as to the installed lining system. It is not applicable to the existing pipeline or any sprayed coatings or annular filler.
This document gives the general requirements common to all relevant renovation techniques.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 11299-2:2018 |
Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes |
This document, read in conjunction with ISO 11299-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground gas supply networks. It is applicable to polyethylene (PE) pipes of three different types:
— PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes;
— PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating;
— Coated PE pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe ("coated pipe"), as described in Annex A.
In addition it covers:
— jointing of pipe lengths by means of butt fusion;
— fabricated and injection-moulded fittings made of PE;
It is applicable to PE pipes, fittings and assemblies intended to be used at an operating temperature of 20 °C as the reference temperature.
NOTE For other operating temperatures, guidance is given in ISO 4437-5:2014.
|
Published |
2018-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 11299-3:2011 |
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes |
ISO 11299-3:2011, in conjunction with ISO 11299-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of gas supply networks.
ISO 11299-3:2011 is applicable to polyethylene (PE) pipes for both independent and interactive pressure pipe liners as well as associated fittings and joints for the construction of the lining system.
|
Withdrawn |
2011-09 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 14224:2016 |
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment |
ISO 14224:2016 provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data collection principles and associated terms and definitions that constitute a "reliability language" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a "reliability thesaurus" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user.
Standardization of data collection practices facilitates the exchange of information between parties, e.g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed. This International Standard also provides a framework and guidelines for establishing performance objectives and requirements for equipment reliability and availability performance.
Annex A contains a summary of equipment that is covered by this International Standard.
ISO 14224:2016 defines a minimum amount of data that is required to be collected, and it focuses on two main issues:
- data requirements for the categories of data to be collected for use in various analysis methodologies;
- standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors.
The following main categories of data are to be collected:
a) equipment data, e.g. equipment taxonomy, equipment attributes;
b) failure data, e.g. failure cause, failure consequence;
c) maintenance data, e.g. maintenance action, resources used, maintenance consequence, down time.
NOTE Clause 9 gives further details on data content and data format.
The main areas where such data are used are the following:
1) reliability, e.g. failure events and failure mechanisms;
2) availability/efficiency, e.g. equipment availability, system availability, plant production availability;
3) maintenance, e.g. corrective and preventive maintenance, maintenance plan, maintenance supportability;
4) safety and environment, e.g. equipment failures with adverse consequences for safety and/or environment.
ISO 14224:2016 does not apply to the following:
i. data on (direct) cost issues;
ii. data from laboratory testing and manufacturing (e.g. accelerated lifetime testing), see also 5.2;
iii. complete equipment data sheets (only data seen relevant for assessing the reliability performance are included);
iv. additional on-service data that an operator, on an individual basis, can consider useful for operation and maintenance;
v. methods for analysing and applying RM data (however, principles for how to calculate some basic reliability and maintenance parameters are included in the annexes).
|
Published |
2016-09 |
Edition : 3 |
Number of pages : 272 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
75.180.01
Equipment for petroleum and natural gas industries in general
|
| ISO 14313:1999 |
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 60 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 11299-3:2018 |
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes |
This document, in conjunction with ISO 11299‑1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of gas supply networks.
It applies to pipes and fittings, as manufactured, as well as to the installed lining system. It is applicable to polyethylene (PE) pipe of either solid wall single layer or co-extruded layer construction, which is reduced in the factory or on site to provide a close-fitting independent or interactive pressure pipe liner, as well as associated fittings and joints for the construction of the lining system. This document is not applicable for coated PE pipes having a peelable, contiguous, thermoplastics additional layer on the outside of the pipes.
It is applicable to PE pipes, fittings and assemblies intended to be used at an operating temperature of 20 °C as the reference temperature.
NOTE For other operating temperatures, guidance is given in ISO 4437‑5:2014.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 11563:2003 |
Crude petroleum and petroleum products — Bulk cargo transfer — Guidelines for achieving the fullness of pipelines |
ISO 11563:2003 establishes procedures to achieve the fullness of a pipeline system.
ISO 11563:2003 is applicable to crude oils and petroleum products which are liquid at atmospheric pressure and at the observed temperature. It can be applied to loading, discharges and movements between local storage tanks. It is not the intention of this standard to recommend practices for transcontinental movements.
|
Published |
2003-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
75.180.30
Volumetric equipment and measurements
|
| ISO 11759:1999 |
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
This International Standard specifies the requirements for flexible rubber hoses and hose assemblies used for the
transfer of metered quantities of liquified petroleum gases (LPGs) from dispensing equipment to motor vehicles.
The hoses and hose assemblies specified in this International Standard are intended for use "wet", i.e. permanently
filled with liquid, in the temperature range from ? 40 °C to + 60 °C.
The maximum working pressure is 20 bar (2 MPa).
|
Published |
1999-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
83.140.40
Hoses
|
| ISO 12176-1:1998 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion |
|
Withdrawn |
1998-06 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 12176-1:2006 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion |
ISO 12176-1:2006 specifies the general characteristics of, and performance requirements for, equipment for butt fusion jointing of polyethylene (PE) piping systems using electric heaters. It is applicable to mechanical and pressure-activated equipment for butt fusion jointing PE pipes and fittings either intended to be used for the supply of gaseous fuels, conforming to ISO 4437 and ISO 8085-2, or intended for the conveyance of water for human consumption (including raw water prior to treatment) and for the conveyance of water for general purposes, conforming to ISO 4427-2 and ISO 4427-3.
|
Withdrawn |
2006-07 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 12176-1:2012 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion |
|
Withdrawn |
2012-10 |
Edition : 3 |
Number of pages : 20 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 12176-1:2017 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion |
ISO 12176-1:2017 specifies the general characteristics of, and performance requirements for, equipment for butt fusion jointing of polyethylene (PE) piping systems using electrically powered heater plates.
ISO 12176-1:2017 is applicable to mechanical and pressure-activated equipment for butt fusion jointing of PE pipes and fittings either intended to be used for the supply of gaseous fuels, conforming to ISO 4437‑2[1] and ISO 4437‑3[2], or intended for the conveyance of water for human consumption (including raw water prior to treatment) and for the conveyance of water for general purposes, conforming to ISO 4427‑2[3] and ISO 4427‑3[4].
Butt fusion machines with an automatic controller are subject to additional requirements as given in Annex A.
NOTE This document is also applicable to butt fusion machines for larger nominal pipe diameters and nominal wall thicknesses than given in this document.
|
Published |
2017-06 |
Edition : 4 |
Number of pages : 22 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 12176-2:2008 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion |
ISO 12176-2:2008 specifies performance requirements for electrofusion control units for use with polyethylene (PE) electrofusion fittings for the supply of gaseous fuels or for the conveyance of water for human consumption, including raw water prior to treatment and for the conveyance of water for general purpose or other fluids.
The control units are divided into three input voltage classes: SVLV [safety, very low voltage (up to 50 V)], LV [low voltage (50 V to 250 V)] and HV [higher voltage (250 V to 400 V)].
ISO 12176-2:2008 is applicable to electrofusion control units designed for use in the construction of joints between PE pipes and fittings conforming to International Standards for the supply of gaseous fuels or for the conveyance of water, where the normal operating temperature of the control unit is in the range -10 °C to + 40 °C. If temperatures outside this range are expected, suitable operating limits are subject to agreement between manufacturer and purchaser.
ISO 12176-2:2008 is applicable to control units with current or voltage control for fitting systems based on standard resistance wire heating technology.
|
Published |
2008-06 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 12176-2:2008/Amd 1:2021 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1 |
|
Published |
2021-04 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 12176-3:2001 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge |
|
Withdrawn |
2001-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
;
35.240.15
Identification cards. Chip cards. Biometrics
|
| ISO 12176-3:2006 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge |
ISO 12176-3:2006 describes the format and the contents of a fusion operator's badge, which is used during the construction of polyethylene (PE) piping systems for the supply of gaseous fuels or water to identify the fusion operator and to activate or deactivate the fusion-jointing equipment.
The objective of this part of ISO 12176 is to achieve international interoperability between the operator's badge and the card-reading equipment of fusion-jointing equipment conforming to ISO 12176-1 or ISO 12176-2.
|
Withdrawn |
2006-04 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
;
35.240.15
Identification cards. Chip cards. Biometrics
|
| ISO 12176-3:2011 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge |
ISO 12176-3:2011 describes the format and the contents of a fusion operator's badge, which is used during the construction of polyethylene (PE) piping systems for the supply of gaseous fuels or water to identify the fusion operator and to activate or deactivate the fusion-jointing equipment.
The objective of ISO 12176-3:2011 is to achieve international interoperability between the operator's badge and the card-reading equipment of fusion-jointing equipment conforming to ISO 12176‑1 or ISO 12176‑2. The fusion-jointing equipment is required to read either the bar code or the magnetic-stripe code of the badge and to call up the corresponding data within the equipment in a standard format.
|
Published |
2011-02 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
;
35.240.15
Identification cards. Chip cards. Biometrics
|
| ISO 12176-4:2003 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding |
ISO 12176-4:2003 specifies an encoding system for data on components, assembly methods and jointing operations for polyethylene (PE) piping systems for gas supply, for use in a traceability system.
Reading of the codes can be carried out using alphanumeric or numeric data-recognition systems such as bar-code, magnetic-stripe card or microchip card readers.
This part of ISO 12176 is applicable to PE pipes, fittings and valves conforming to ISO standards for gas supply piping systems and also to the assembly operation utilizing methods such as fusion using a heating tool (butt, socket and saddle fusion), electrofusion (socket and saddle fusion), induction fusion and mechanical jointing.
|
Published |
2003-11 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO 14695:2003/Cor 1:2009 |
Industrial fans — Method of measurement of fan vibration — Technical Corrigendum 1 |
|
Published |
2009-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
17.160
Vibrations, shock and vibration measurements
;
23.120
Ventilators. Fans. Air-conditioners
|
| ISO 12176-5:2021 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems |
This document specifies an encoding system for data of components, assembly methods and jointing operations for polyethylene (PE) piping systems for gas, water and other industrial applications. These data can be used in a traceability system and/or used to perform the fusion of components by using equipment as specified in ISO 12176‑1 and in ISO 12176‑2.
This encoding system is explained in ISO/IEC 16022, ISO/IEC 18004 and ISO/IEC 24778 which refer to established code types, e.g. QR code.
Data to be encoded are: fusion cycle(s), traceability of manufactured products, other manufacturer’s information that can also be given on websites such as voluntary certificates of quality and approvals.
This document specifies the export of data (type, format and sequence) from a data retrieval system.
Provisions of this document are applicable to polyethylene components conforming to ISO 4427‑2, ISO 4427‑3, ISO 4437‑2, ISO 4437‑3, ISO 4437‑4 and ISO 15494, and can also be applicable to any other components used in PE systems.
ISO 13950 and ISO 12176‑4, which partly cover the fields of application of this document, can be used in parallel.
|
Published |
2021-05 |
Edition : 1 |
Number of pages : 58 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
23.040.20
Plastics pipes
;
23.040.45
Plastics fittings
|
| ISO/TR 12489:2013 |
Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems |
ISO/TR 12489:2013 aims to close the gap between the state-of-the-art and the application of probabilistic calculations for the safety systems of the petroleum, petrochemical and natural gas industries. It provides guidelines for reliability and safety system analysts and the oil and gas industries.
The elementary approaches (e.g. PHA, HAZID, HAZOP, FMECA) are out of the scope of ISO/TR 12489:2013. Yet they are of utmost importance as their results provide the input information essential to properly undertake the implementation of the approaches described in ISO/TR 12489:2013: analytical formulae, Boolean approaches (reliability block diagrams, fault trees, event trees, etc.), Markov graphs and Petri nets.
ISO/TR 12489:2013 is focused on probabilistic calculations of random failures and, therefore, the non-random failures are out of the scope even if, to some extent, they are partly included into the reliability data collected from the field.
|
Published |
2013-11 |
Edition : 1 |
Number of pages : 261 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
75.180.01
Equipment for petroleum and natural gas industries in general
|
| ISO 12490:2011 |
Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
ISO 12490:2011 defines the requirements for mechanical integrity and sizing of actuators used on valves manufactured under ISO 14313 and API Specification 6D.
ISO 12490:2011 is applicable to all types of electric, pneumatic and hydraulic actuators, inclusive of mounting kit, installed on pipeline valves.
ISO 12490:2011 is not applicable to actuators installed on control valves, valves being used for regulation, valves in sub-sea service, handheld powered devices, stand-alone manually operated gearboxes, instrument tubing and associated fittings and actuator control equipment.
|
Published |
2011-09 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO/CD 12747 |
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Recommended practice for pipeline life extension |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|