| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 18326:2018 |
Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct — Testing and rating for performance |
This document specifies the standard conditions for capacity and efficiency ratings of non-ducted portable air-cooled air conditioners having a single exhaust duct and non-ducted portable air-cooled heat pumps having a single exhaust duct. Such air conditioners and heat pumps may include an evaporatively cooled condenser cooled by air and the evaporation of:
a) condensate collected from the evaporator;
b) external supplementary water stored in a supplementary water tank; or
c) both a) and b).
This document also specifies the test methods for determining the capacity and efficiency ratings.
This document applies to equipment that is factory-made, electrically driven and uses mechanical compression. This document is applicable to equipment utilizing one or more refrigeration systems.
This document is not applicable to the rating and testing of the following:
i) Water-source heat pumps or water-cooled air conditioners;
ii) Multi-split-system air conditioners and air-to-air heat pumps (see ISO 15042:2017 for the testing of such equipment);
iii) Individual assemblies not constituting a complete refrigeration system;
iv) Equipment using the absorption refrigeration cycle;
v) Ducted equipment (see ISO 13253:2017 for the testing of such equipment);
vi) Evaporative coolers or any other cooling systems that are not of the vapour compression type;
vii) Dehumidifiers;
viii) Spot coolers.
|
Published |
2018-09 |
Edition : 1 |
Number of pages : 47 |
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
;
27.080
Heat pumps
|
| ISO 18326:2018/Amd 1:2021 |
Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct — Testing and rating for performance — Amendment 1 |
|
Published |
2021-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
;
27.080
Heat pumps
|
| ISO 21773:2021 |
Methods of test and characterization of performance for energy recovery components |
This document specifies methods for testing and characterizing the performance of air-to-air heat/energy exchangers when used as devices to transfer heat or heat and water vapor between two airstreams used in ventilation systems. It also specifies methods to characterize the performance of exchangers for use in calculation of the energy performance of buildings. This document is applicable to:
— fixed-plate exchangers (also known as recuperators),
— rotary exchangers, including heat wheels and total energy wheels (also known as regenerators),
— heat pipe exchangers using a heat transfer medium, excluding those using mechanical pumping.
This document does not provide a method for measuring the response of exchangers to the formation of frost.
|
Published |
2021-06 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
;
91.120.10
Thermal insulation of buildings
|
| ISO/DIS 24660 |
Fans — Determination of airflow propelled through an open personnel door by a positive pressure ventilator |
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
|
| ISO 27327-1:2009 |
Fans — Air curtain units — Part 1: Laboratory methods of testing for aerodynamic performance rating |
ISO 27327-1:2009 establishes uniform methods for laboratory testing of air curtain units to determine aerodynamic performance in terms of airflow rate, outlet air velocity uniformity, power consumption and air velocity projection, for rating or guarantee purposes.
ISO 27327-1:2009 is not applicable to the specification of test procedures to be used for design, production or field testing.
|
Published |
2009-06 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
|
| ISO/WD 27327-1 |
Fans — Air curtain units — Part 1: Laboratory methods of testing for aerodynamic performance rating |
|
Deleted |
|
Edition : 2 |
|
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
|
| ISO 27327-2:2014 |
Fans — Air curtain units — Part 2: Laboratory methods of testing for sound power |
ISO 27327-2:2014 deals with the determination of the acoustic performance of air curtain units. In addition, it can be used to determine the acoustic performance of air curtain units combined with an ancillary device.
|
Published |
2014-02 |
Edition : 1 |
Number of pages : 38 |
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
;
17.140.20
Noise emitted by machines and equipment
|
| ISO/DTR 27327-3 |
Fans — Air curtain units — Part 3: Test methods to determine energy effectiveness |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
23.120
Ventilators. Fans. Air-conditioners
|
| ISO/IEC 11801:2002/Cor 2:2002 |
Information technology — Generic cabling for customer premises — Technical Corrigendum 2 |
|
Withdrawn |
2002-12 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
35.200
Interface and interconnection equipment
|
| ISO 817:1974 |
Organic refrigerants — Number designation |
Establishes a simple system of referring to common organic refrigerants instead of using the chemical name, formula or trade name. Although the use of a number is an accurate way of designating the refrigerant, there is no intention of precluding the use of a chemical name or formula. - Replaces ISO Recommendation R 817-1968.
|
Withdrawn |
1974-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
71.100.45
Refrigerants and antifreezes
|
| ISO 817:2005 |
Refrigerants — Designation system |
ISO 817:2005 provides an unambiguous system for numbering and assigning composition-designating prefixes to refrigerants. Tables listing the refrigerant designations are included. It is intended to be used with other relevant safety standards such as ISO 5149, IEC 603352-24 and IEC 60335-2-40.
|
Withdrawn |
2005-01 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
71.100.45
Refrigerants and antifreezes
|
| ISO 817:2014 |
Refrigerants — Designation and safety classification |
ISO 817:2014 provides an unambiguous system for assigning designations to refrigerants. It also establishes a system for assigning a safety classification to refrigerants based on toxicity and flammability data, and provides a means of determining the refrigerant concentration limit.
|
Published |
2014-06 |
Edition : 3 |
Number of pages : 73 |
Technical Committee |
71.100.45
Refrigerants and antifreezes
|
| ISO 817:2014/Amd 1:2017 |
Refrigerants — Designation and safety classification — Amendment 1 |
|
Published |
2017-11 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
71.100.45
Refrigerants and antifreezes
|
| ISO 817:2014/Amd 2:2021 |
Refrigerants — Designation and safety classification — Amendment 2 |
|
Published |
2021-03 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
71.100.45
Refrigerants and antifreezes
|
| ISO/CD 817 |
Refrigerants — Designation and safety classification |
Revision of ISO 817: 2014 based on recommendations from ISO/TC 86/SC 8/TF 1, ISO/TC 86/SC 8/TF 2, and ISO/TC 86/SC 8/MA.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
71.100.45
Refrigerants and antifreezes
|
| ISO 17584:2005 |
Refrigerant properties |
ISO 17584:2005 specifies thermophysical properties of several commonly used refrigerants and refrigerant blends.
ISO 17584:2005 is applicable to the refrigerants R12, R22, R32, R123, R125, R134a, R143a, R152a, R717 (ammonia), and R744 (carbon dioxide) and to the refrigerant blends R404A, R407C, R410A, and R507. The following properties are included: density, pressure, internal energy, enthalpy, entropy, heat capacity at constant pressure, heat capacity at constant volume, speed of sound, and the Joule-Thomson coefficient, in both single-phase states and along the liquid-vapour saturation boundary. The numerical designation of these refrigerants is that defined in ISO 817.
|
Withdrawn |
2005-12 |
Edition : 1 |
Number of pages : 70 |
Technical Committee |
71.100.45
Refrigerants and antifreezes
|
| ISO 17584:2022 |
Refrigerant properties |
This document specifies the thermophysical properties of several commonly used refrigerants and refrigerant blends.
This document is applicable to refrigerants R12, R22, R32, R123, R125, R134a, R143a, R152a, R290, R600a, R717 (ammonia), R744 (carbon dioxide), R1233zd(E), R1336mzz(Z), R1234yf and R1234ze(E) and to the refrigerant blends R404A, R407C, R410A, and R507A. The following properties are included: density, pressure, internal energy, enthalpy, entropy, heat capacity at constant pressure, heat capacity at constant volume, speed of sound, and the Joule-Thomson coefficient, in both single-phase states and along the liquid-vapour saturation boundary. The numerical designation of these refrigerants is that defined in ISO 817.
NOTE 1 R12, R22, R123 are controlled substances under the Montreal Protocol, Annex A (R12) or Annex C Group I (R22, R123).
NOTE 2 R32, R125, R134a, R143a, R152a, R404A, R407C, R410A, and R507A are controlled substances under the Montreal Protocol, Annex F or blend thereof.
|
Published |
2022-08 |
Edition : 2 |
Number of pages : 99 |
Technical Committee |
71.100.45
Refrigerants and antifreezes
|
| ISO/R 786:1968 |
Withdrawal of ISO/R 786-1968 |
|
Withdrawn |
1968-07 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO/R 824-1:1968 |
Household refrigerators — Part 1: Performance requirements |
|
Withdrawn |
1968-09 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO/R 825-1:1968 |
Household refrigerators — Part 1: Special low-temperature compartments for the storage of frozen foodstuffs |
|
Withdrawn |
1968-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 2410:1973 |
Household refrigerators — Methods of test for the information of the consumer |
Describes methods for household refrigerators used as a technical basis for the following: information labels, comparative tests, certification marks, etc. Not contained are specifications and rules for labelling, marking, sampling, etc. For the comparison of different types and designs of a certain product, the same test methods shall be used. The methods must be unambiguous.
|
Withdrawn |
1973-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 5155:1995 |
Household refrigerating appliances — Frozen food storage cabinets and food freezers — Characteristics and test methods |
Specifies the essential characteristics for household frozen food storage cabinets and food freezers and lays down the methods for the checking of these characteristics. The tests described are type tests. Does not apply to low-temperature compartments or freezer compartments incorporated in refrigerators. Electrical and mechanical safety requirements are specified in IEC 335-2-24. Replaces the first edition which has been technical revised.
|
Withdrawn |
1995-11 |
Edition : 2 |
Number of pages : 39 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 7371:1985 |
Performance of household refrigerating appliances — Refrigerators with or without low temperature compartment |
|
Withdrawn |
1985-02 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 7371:1985/Amd 1:1987 |
Performance of household refrigerating appliances — Refrigerators with or without low temperature compartment — Amendment 1 |
|
Withdrawn |
1987-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 7371:1995 |
Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods |
Specifies the essential characteristics for household refrigerators, with or without a cellar or low-temperature compartment, lays down the methods for the checking of these characteristics. The tests described are type tests. Electrical and mechanical safety requirements are specified in IEC 335-2-24. Replaces the first edition which has been technical revised.
|
Withdrawn |
1995-11 |
Edition : 2 |
Number of pages : 47 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 7371:1995/Amd 1:1997 |
Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods — Amendment 1: for the preservation of highly perishable foodstuffs |
|
Withdrawn |
1997-12 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 8187:1991 |
Household refrigerating appliances — Refrigerator-freezers — Characteristics and test methods |
Does not apply to refrigerator-freezers cooled by internal forced air circulation. The tests described are type tests. When it is necessary to verify the performance of a refrigerator-freezer of a given type, all the tests described should in principle be applied to one and the same unit. The tests can also be made individually for the study of a particular characteristic. Where no test method is specified, the particular requirement concerned shall be considered as a recommendation.
|
Withdrawn |
1991-03 |
Edition : 2 |
Number of pages : 52 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 8187:1991/Amd 1:1997 |
Household refrigerating appliances — Refrigerator-freezers — Characteristics and test methods — Amendment 1: compartments for the preservation of highly perishable foodstuffs |
|
Withdrawn |
1997-12 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 8561:1995 |
Household frost-free refrigerating appliances — Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation — Characteristics and test methods |
Specifies the essential characteristics for household frozen food storage cabinets and food freezers cooled by internal forced air circulation and for household refrigerators and refrigerator-freezers with or without cellar, ice-making or frozen food storage compartments. The tests described are type tests. These tests can also be made individually for the study of a particular characteristic. Electrical and mechanical safety requirements are specified in IEC 335-2-24.
|
Withdrawn |
1995-11 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 8561:1995/Amd 1:1997 |
Household frost-free refrigerating appliances — Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation — Characteristics and test methods — Amendment 1: compartments for the preservation of highly perishable foodstuffs |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 8960:1991 |
Refrigerators, frozen-food storage cabinets and food freezers for household and similar use — Measurement of emission of airborne acoustical noise |
The heading "Replacement" indicates that the text given in this standard replaces the relevant text in IEC 704-1; similarly the heading "Addition" indicates that the text given in this standard supplements the relevant text in IEC 704-1. Annexes A and B are for information only.
|
Withdrawn |
1991-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 15502:2005 |
Household refrigerating appliances — Characteristics and test methods |
ISO 15502:2005 specifies the essential characteristics of household refrigerating appliances, factory-assembled and cooled by internal natural convection or forced air circulation, and establishes test methods for checking the characteristics.
|
Withdrawn |
2005-10 |
Edition : 1 |
Number of pages : 81 |
Technical Committee |
97.040.30
Domestic refrigerating appliances
|
| ISO 1992-1:1974 |
Commercial refrigerated cabinets — Methods of test — Part 1: Calculation of linear dimensions, areas and volumes |
Defines the terms and establishes the methods for determining linear dimensions, areas and volumes for commercial refrigerated cabinets intended for the sale and/or display of food products. - Replaces ISO recommendation R 1992-1971.
|
Withdrawn |
1974-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 1992-2:1973 |
Commercial refrigerated cabinets — Methods of test — Part 2: General test conditions |
Constitutes general conditions for the type testing of commercial refrigerated cabinets intended for the sale and/or display of food products. Specifications related to selection and installation of test specimen, testing equipment, and preparation before test are included.
|
Withdrawn |
1973-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 1992-3:1973 |
Commercial refrigerated cabinets — Methods of test — Part 3: Temperature test |
Describes methods for the determination of test package temperatures in commercial refrigerated cabinets intended for the sale and/or display of food products. A so-called M-package (test package with temperature sensor) is defined. Specifications related to loading the cabinet, running-in, and test period are included.
|
Withdrawn |
1973-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 1992-4:1974 |
Commercial refrigerated cabinets — Methods of test — Part 4: Defrosting test |
Specifies the procedure to test package the defrosting method of commercial refrigerated cabinets intended or the sale and/or display of food products, when tested on the same conditions as established for the temperature test (see part 3 of ISO 1992). The test is not applicable to cabinets or parts thereof intended to be defrosted manually.
|
Withdrawn |
1974-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 1992-5:1974 |
Commercial refrigerated cabinets — Methods of test — Part 5: Water vapour condensation test |
Describes the procedure of a water vapour condensation test for commercial refrigerated cabinets intended for the sale and/or display of food products, when tested on the same conditions as established for the temperature and defrosting tests (see parts 3 and 4 of ISO 1992).
|
Withdrawn |
1974-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 1992-6:1974 |
Commercial refrigerated cabinets — Methods of test — Part 6: Electrical energy consumption test |
Applicable to commercial refrigerated cabinets intended for the sale and/or display of food products. The electrical energy consumption test shall be made in accordance with part 2 of ISO 1992 and on ambient conditions corresponding to the climate class(es) for which the cabinet is designed. In case of cabinets supplied without night-covers, any built-in cabinet lighting shall be on continuously during the test.
|
Withdrawn |
1974-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 1992-8:1978 |
Commercial refrigerated cabinets — Test methods — Part 8: Test for accidental mechanical contact |
Establishes the use of IEC standard test fingers in testing protection against mechanical hazard on the normal conditions of use due to contact through openings in commercial refrigerated cabinets intended for the sale and/or display of food products. For tests in respect of accidental electrical contact reference should be made to appropriate IEC tests.
|
Withdrawn |
1978-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 5160-1:1979 |
Commercial refrigerated cabinets — Technical specifications — Part 1: General requirements |
Provides guidance in the selection and use of materials and specifies the marking and performance requirements for commercial refrigerated cabinets intended for the sale and/or display of food products. Is to be read in conjunction with ISO 5160/2 which covers in detail the requirements for cabinets of specific type or intended for particular applications.
|
Withdrawn |
1979-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 5160-2:1980 |
Commercial refrigerated cabinets — Technical specifications — Part 2: Particular requirements |
Specifies the method of classification and particular requirements for commercial refrigerated display cabinets. Is complementary to ISO 5160-1. Four classes of cabinets are dovered, determined by one or more of the following temperatures (see ISO 1992-3): maximum temperature, minimum temperature, and mean temperature.
|
Withdrawn |
1980-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 6369 |
Ice makers for commercial use — Classification, requirements and test conditions |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 9346:1987 |
Thermal insulation — Mass transfer — Physical quantities and definitions |
Defines general terms and physical quantities in the field of mass transfer relevant to thermal insulation systems, and gives the corresponding symbols and units.
|
Withdrawn |
1987-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
01.060
Quantities and units
;
27.220
Heat recovery. Thermal insulation
|
| ISO 22041:2019 |
Refrigerated storage cabinets and counters for professional use — Performance and energy consumption |
This document specifies requirements for the verification of performance and energy consumption of refrigerated storage cabinets and counters for professional use in commercial kitchens, hospitals, canteens, preparation areas of bars, bakeries, gelateria, institutional catering and similar professional areas.
The products covered in this document are intended to store foodstuffs. It specifies test conditions and methods for checking that the requirements have been satisfied, as well as classification of the cabinets and counters, their marking and the list of their characteristics to be declared by the manufacturer.
It is not applicable to:
— refrigerated cabinets used in the direct sale of foodstuffs;
— cabinets that carry out food processing and not just storage function (e.g. bakery cabinets that chill, heat and humidify);
— cabinets with water cooled condenser;
— appliances with remote condensing unit;
— appliances with open top tables and saladettes for preparation or storage of foodstuffs;
— cabinets specifically intended for storage of specific foodstuffs (i.e. fresh meat, fresh fish, etc.) operating at a temperature different from those specified in Table 1;
— chest freezers;
— appliances intended for short time /intermittent normal operation during the full day;
— built-in cabinets;
— roll-in cabinets;
— pass-through cabinets;
— ice cream freezers.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 33 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 22042:2021 |
Blast chiller and freezer cabinets for professional use — Classification, requirements and test conditions |
This document specifies the requirements for the verification of performance and energy consumption of blast cabinets for professional use in commercial kitchens, hospitals, canteens, institutional catering and similar professional areas.
The appliances covered by this document are intended to rapidly cool down hot foodstuffs up to a load capacity of 300 kg.
This document applies to:
— blast chillers;
— blast freezers;
— multi-use blast chillers/freezers.
The following appliances are not covered:
— roll-in cabinet;
— pass-through cabinet;
— cabinets with remote condensing unit;
— cabinets with water cooled condenser;
— blast chilling and freezing tunnels;
— continuous blast-chilling and blast-freezing equipment;
— bakery combined freezing and storage units.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 22042:2021/FDAmd 1 |
Blast chiller and freezer cabinets for professional use — Classification, requirements and test conditions — Amendment 1 |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 22043:2020 |
Ice-cream freezers — Classification, requirements and test conditions |
This document specifies the classification for horizontal closed ice-cream freezer with access of the product from the top via transparent or solid lid(s) and specifies their requirements and test methods.
The ice-cream freezers defined in this document are different from supermarket segment freezers, as they work with static air cooling, with a skin evaporator (no evaporator fan) and are used specifically for the storage and display of pre-packed ice-cream.
This document is only applicable to integral type refrigeration systems. It is not applicable to remote and secondary system type cabinets. Ice-cream freezers defined in this document are intended to have a net volume ≤600 l. For transparent lid ice-cream freezers only, they are intended to have a net volume/TDA ≥ 0,35 m.
|
Published |
2020-11 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 22044:2021 |
Commercial beverage coolers — Classification, requirements and test conditions |
This document specifies the classification for commercial beverage coolers and their requirements and test methods. This document is applicable to integral refrigeration systems.
This document is not applicable to remote and secondary system cabinets.
|
Published |
2021-12 |
Edition : 1 |
Number of pages : 53 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 23953-1:2005 |
Refrigerated display cabinets — Part 1: Vocabulary |
ISO 23953-1:2005 establishes a vocabulary of terms and definitions related to refrigerated display cabinets used for the sale and display of foodstuffs. It is not applicable to refrigerated vending machines or cabinets intended for use in catering or similar non-retail applications.
|
Withdrawn |
2005-10 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
97.130.20
Commercial refrigerating appliances
|
| ISO 23953-1:2005/Amd 1:2012 |
Refrigerated display cabinets — Part 1: Vocabulary — Amendment 1 |
|
Withdrawn |
2012-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
97.130.20
Commercial refrigerating appliances
|
| ISO 9251:1987 |
Thermal insulation — Heat transfer conditions and properties of materials — Vocabulary |
Defines terms used in the field of thermal insulation to describe heat transfer conditions, such as steady state, non-steady state, periodic state, transient state and heat transfer, and properties of materials.
|
Published |
1987-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
;
01.040.27
Energy and heat transfer engineering (Vocabularies)
|
| ISO 23953-1:2015 |
Refrigerated display cabinets — Part 1: Vocabulary |
ISO 23953-1:2015 establishes a vocabulary of terms and definitions relative to refrigerated display cabinets used for the sale and display of foodstuffs. It is not applicable to refrigerated vending machines or cabinets intended for use in catering or similar non-retail applications.
NOTE In addition to terms in English and French, two of the three official ISO languages, this part of ISO 23953 gives the equivalent terms in German, Italian, and Spanish; these are published under the responsibility of the member bodies for Germany (DIN), Italy (UNI), and Spain (AENOR). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
|
Published |
2015-10 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
97.130.20
Commercial refrigerating appliances
|
| ISO/FDIS 23953-1 |
Refrigerated display cabinets — Part 1: Vocabulary |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
97.130.20
Commercial refrigerating appliances
|
| ISO 23953-2:2005 |
Refrigerated display cabinets — Part 2: Classification, requirements and test conditions |
ISO 23953-2:2005 specifies requirements for the construction, characteristics and performance of refrigerated display cabinets used in the sale and display of foodstuffs. It specifies test conditions and methods for checking that the requirements have been satisfied, as well as classification of the cabinets, their marking and the list of their characteristics to be declared by the manufacturer. It is not applicable to refrigerated vending machines or cabinets intended for use in catering or similar non-retail applications; nor does it cover the choice of the types of foodstuffs chosen to be displayed in the cabinets.
|
Withdrawn |
2005-10 |
Edition : 1 |
Number of pages : 79 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 23953-2:2005/Amd 1:2012 |
Refrigerated display cabinets — Part 2: Classification, requirements and test conditions — Amendment 1 |
|
Withdrawn |
2012-02 |
Edition : 1 |
Number of pages : 47 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO 23953-2:2015 |
Refrigerated display cabinets — Part 2: Classification, requirements and test conditions |
ISO 23953-2:2015 specifies requirements for the construction, characteristics and performance of refrigerated display cabinets used in the sale and display of foodstuffs. It specifies test conditions and methods for checking that the requirements have been satisfied, as well as classification of the cabinets, their marking and the list of their characteristics to be declared by the manufacturer. It is not applicable to refrigerated vending machines. It is also not applicable to cabinets intended for storage or cabinets intended for use, for instance, in catering or non-retail refrigerated applications nor does it cover the choice of the types of foodstuffs chosen to be displayed in the cabinets.
|
Published |
2015-11 |
Edition : 2 |
Number of pages : 89 |
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO/FDIS 23953-2 |
Refrigerated display cabinets — Part 2: Classification, requirements and test conditions |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
97.130.20
Commercial refrigerating appliances
|
| ISO/DIS 6324 |
Thermal insulation products — Flexible microporous insulation for industrial applications — Specification |
|
Under development |
|
Edition : 1 |
Number of pages : 9 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 7345:1987 |
Thermal insulation — Physical quantities and definitions |
Defines physical quantities used in the field of thermal insulation, i.a. quantity of heat, heat flow rate, density of heat flow rate, thermal conductivity, thermal resistance, thermal transmittance, heat capacity, thermal diffusivity, thermal effusivity etc., and gives the corresponding symbols and units.
|
Withdrawn |
1987-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
01.060
Quantities and units
;
27.220
Heat recovery. Thermal insulation
|
| ISO 7345:2018 |
Thermal performance of buildings and building components — Physical quantities and definitions |
ISO 7345:2018 defines physical quantities used in the thermal performance of buildings and building elements, and gives the corresponding symbols and units.
NOTE Because the scope of this document is restricted to thermal performance and energy use in the built environment, some of the definitions it contains differ from those given ISO 80000-5.
|
Published |
2018-03 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
01.060
Quantities and units
;
27.220
Heat recovery. Thermal insulation
|
| ISO 9288:1989 |
Thermal insulation — Heat transfer by radiation — Physical quantities and definitions |
Contains general terms, terms related to surfaces either receiving, transferring or emitting a thermal radiation, terms related to surfaces emitting a thermal radiation, terms related to opaque or semi-transparent surfaces receiving a thermal radiation, terms related to a semi-transparent medium receiving a thermal radiation, and their definition.
|
Withdrawn |
1989-12 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
01.060
Quantities and units
;
27.220
Heat recovery. Thermal insulation
|
| ISO 8143:2010 |
Thermal insulation products for building equipment and industrial installations — Calcium silicate products |
ISO 8143:2010 specifies the requirements for factory-made calcium silicate products which are used for thermal insulation of industrial installations and building equipment with an operating temperature of up to approximately +1 100 °C.
NOTE Calcium silicate products can be used at temperatures lower than 0 °C. For operating temperatures below 0 °C, special tests, regarding the suitability of the product in the intended application, are advised (e.g. liquefaction of oxygen). It is advisable to seek the advice of the manufacturer(s) in all cases.
The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware.
ISO 8143:2010 describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by ISO 8143:2010 are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered.
|
Published |
2010-03 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 8301:1991 |
Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus |
Defines the use of the heat flow meter method to measure the steady-state heat transfer through flat slab specimens and the calculation of its heat transfer properties. Annex A forms an integral part of this standard. Annexes B, C, D and E are for information only.
|
Published |
1991-08 |
Edition : 1 |
Number of pages : 38 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 8301:1991/Amd 1:2010 |
Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus — Amendment 1 |
|
Published |
2010-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 8302:1991 |
Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
Defines the use of the guarded hot plate method to measure the steady-state heat transfer through flat slab specimens and the calculation of its heat transfer properties. Annex A forms an integral part of this standard. Annexes B, C and D are for information only.
|
Published |
1991-08 |
Edition : 1 |
Number of pages : 47 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 8497:1994 |
Thermal insulation — Determination of steady-state thermal transmission properties of thermal insulation for circular pipes |
Specifies apparatus performance requirements, but does not specify apparatus design. Applies to circular pipes, generally operating at temperatures above ambient. The type of specimen, temperatures and test conditions to which the standard applies are specified in the standard in detail.
|
Published |
1994-04 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 8990:1994 |
Thermal insulation — Determination of steady-state thermal transmission properties — Calibrated and guarded hot box |
Lays down the principles for the design of the apparatus and minimum requirement that shall be met for determination of the laboratory steady-state thermal transmission properties of building components and similar components for industrial use. Does not specify a particular design. Describes also the apparatus, measurement technique and necessary data reporting. Primarily intended for laboratory measurements of large, inhomogeneous specimens. Does not provide for measurements where there is mass transfer through the specimen during the test.
|
Published |
1994-09 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 9229:1991 |
Thermal insulation — Materials, products and systems — Vocabulary |
Gives terms and definitions in English and French. Refers to ISO 7345, ISO 9251, ISO 9288, and ISO 9346. Annexes A, B and C form an integral part of this standard.
|
Withdrawn |
1991-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
;
01.040.27
Energy and heat transfer engineering (Vocabularies)
|
| ISO 9229:2007 |
Thermal insulation — Vocabulary |
ISO 9229:2007 establishes a vocabulary of terms used in the field of thermal insulation covering materials, products, components and applications.
|
Withdrawn |
2007-07 |
Edition : 2 |
Number of pages : 37 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
;
01.040.27
Energy and heat transfer engineering (Vocabularies)
|
| ISO 9229:2020 |
Thermal insulation — Vocabulary |
This document provides a vocabulary of terms used in the field of thermal insulation that covers materials, products, components and applications. Some of the terms can have a different meaning when used in other industries or applications.
|
Published |
2020-06 |
Edition : 3 |
Number of pages : 19 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
;
01.040.27
Energy and heat transfer engineering (Vocabularies)
|
| ISO 9288:2022 |
Thermal insulation — Heat transfer by radiation — Vocabulary |
This document defines physical quantities and other terms in the field of thermal insulation relating to heat transfer by radiation.
|
Published |
2022-08 |
Edition : 2 |
Number of pages : 23 |
Technical Committee |
01.060
Quantities and units
;
27.220
Heat recovery. Thermal insulation
|
| ISO 9346:1987/Amd 1:1996 |
Thermal insulation — Mass transfer — Physical quantities and definitions — Amendment 1 |
Adds terms of physical quantities and definitions to clause 3.
|
Withdrawn |
1996-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.060
Quantities and units
;
27.220
Heat recovery. Thermal insulation
|
| ISO 9346:2007 |
Hygrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary |
ISO 9346:2007 defines physical quantities and other terms in the field of mass transfer relevant to buildings, building elements and systems, building components and building materials. For physical quantities the standard also gives the corresponding symbols and units.
|
Published |
2007-10 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
01.060
Quantities and units
;
27.220
Heat recovery. Thermal insulation
|
| ISO 10051:1996 |
Thermal insulation — Moisture effects on heat transfer — Determination of thermal transmissivity of a moist material |
Specifies a method to determine the thermal transmissivity of a moist material (
lambda
) under steady-state moisture conditions, i. e. not affected by moisture movement.
|
Published |
1996-04 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 16957:2016 |
Measurement of apparent thermal conductivity of wet porous building materials by a periodic method |
ISO 16957:2016 describes a method of measuring the thermal conductivity (diffusivity) of a wet porous building material and a method of evaluating the measurement uncertainty.
While ISO 10051 is the current International Standard, based on a steady-state method, ISO 16957:2016 proposes a method that makes use of a non-steady-state method which uses a small temperature change with a short period as an input. Along with the measurement, an evaluation of the measurement uncertainty is described, which makes possible a simple and practical measuring method.
ISO 16957:2016 intends to measure the apparent (effective) thermal conductivity, including latent heat transfer caused by vapour movement. The situation in which moisture and/or air movement occur due to convection or gravity is excluded. The application of ISO 16957:2016 to high moisture content is excluded so that the gravity effect can be neglected. ISO 16957:2016 can be applied to a porous material heavier than about 100 kg/m3, in which radiative heat transfer can be neglected.
It specifies the following:
a) a non-steady-state method of measuring thermal conductivity;
b) an approximation formula for the measurement uncertainty caused by moisture movement and nonuniform moisture distribution (and, thus, a determination of the measuring conditions that satisfy the upper limit of measurement uncertainty);
c) an estimate of the heat transfer caused by moisture (vapour) movement.
|
Published |
2016-06 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 21901:2021 |
Thermal insulation — Test method for thermal diffusivity — Periodic heat method |
This document specifies a periodic heat method for measurement of the thermal diffusivity of thermal insulation material in the shape of a flat plate.
|
Published |
2021-02 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
|
| ISO 23993:2008 |
Thermal insulation products for building equipment and industrial installations — Determination of design thermal conductivity |
ISO 23993:2008 gives methods to calculate design thermal conductivities from declared thermal conductivities for the calculation of the thermal performance of building equipment and industrial installations.
These methods are valid for operating temperatures from -200 °C to +800 °C.
The conversion factors, established for the different influences, are valid for the temperature ranges indicated in the relevant clauses or annexes.
|
Published |
2008-02 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
27.220
Heat recovery. Thermal insulation
;
91.100.60
Thermal and sound insulating materials
;
91.120.10
Thermal insulation of buildings
|
| ISO 6242-1:1992 |
Building construction — Expression of users' requirements — Part 1: Thermal requirements |
Defines how the thermal requirements of building users can be identified, expressed and quantified. Describes users' objectives and the parameters used to express them. Specifies units of measurement and means of evaluation.
|
Withdrawn |
1992-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
91.040.01
Buildings in general
;
91.120.10
Thermal insulation of buildings
|
| ISO/FDIS 6781-1 |
Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 1: General procedures |
|
Under development |
|
Edition : 1 |
Number of pages : 39 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 12241:2022 |
Thermal insulation for building equipment and industrial installations — Calculation rules |
This document gives rules for the calculation of heat-transfer-related properties of building equipment and industrial installations, predominantly under steady-state conditions. This document also gives a simplified approach for the calculation of thermal bridges.
|
Published |
2022-06 |
Edition : 3 |
Number of pages : 52 |
Technical Committee |
91.120.10
Thermal insulation of buildings
;
91.140.01
Installations in buildings in general
|
| ISO 6781-3:2015 |
Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 3: Qualifications of equipment operators, data analysts and report writers |
ISO 6781-3:2015 specifies the qualifications and competence requirements for personnel who (i) perform thermographic investigations on buildings, (ii) interpret the data emanating from thermographic investigations, and (iii) report the results of thermographic investigations.
ISO 6781-3:2015 provides the basis for a statement of conformity, in three classes, of the knowledge, skills and abilities of individuals to perform thermographic measurements, analysis and reporting of results for small buildings, residential buildings, and commercial and institutional buildings.
ISO 6781-3:2015 is not applicable to specialized equipment or other specific situations.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 6781:1983 |
Thermal insulation — Qualitative detection of thermal irregularities in building envelopes — Infrared method |
Specifies a qualitative method, by thermographic examination (infrared method), for detecting thermal irregularities in building envelopes. The method is used to identify wide variations in the thermal properties, including air tightness, of the components constituting the external envelopes of buildings. Does not apply to the determination of the degree of thermal insulation and air tightness of a structure.
|
Published |
1983-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 6946-1:1986 |
Thermal insulation — Calculation methods — Part 1: Steady state thermal properties of building components and building elements |
|
Withdrawn |
1986-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 6946-2:1986 |
Thermal insulation — Calculation methods — Part 2: Thermal bridges of rectangular sections in plane structures |
|
Withdrawn |
1986-11 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 6946:1996 |
Building components and building elements — Thermal resistance and thermal transmittance — Calculation method |
Gives the method of calculation of the thermal resistance and thermal transmittance of building components and building elements, excluding doors, windows and other glazed units and components through which air is designed to permeate. Replaces ISO 6946-1. ISO 6946-2:1986 was withdrawn in 1995.
|
Withdrawn |
1996-08 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
91.060.01
Elements of buildings in general
;
91.120.10
Thermal insulation of buildings
|
| ISO 6946:1996/Amd 1:2003 |
Building components and building elements — Thermal resistance and thermal transmittance — Calculation method — Amendment 1 |
|
Withdrawn |
2003-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
91.060.01
Elements of buildings in general
;
91.120.10
Thermal insulation of buildings
|
| ISO 6946:2007 |
Building components and building elements — Thermal resistance and thermal transmittance — Calculation method |
ISO 6946:2007 provides the method of calculation of the thermal resistance and thermal transmittance of building components and building elements, excluding doors, windows and other glazed units, curtain walling, components which involve heat transfer to the ground, and components through which air is designed to permeate.
The calculation method is based on the appropriate design thermal conductivities or design thermal resistances of the materials and products for the application concerned.
The method applies to components and elements consisting of thermally homogeneous layers (which can include air layers).
ISO 6946:2007 also provides an approximate method that can be used for elements containing inhomogeneous layers, including the effect of metal fasteners, by means of a correction term given in Annex D. Other cases where insulation is bridged by metal are outside the scope of ISO 6946:2007.
|
Withdrawn |
2007-12 |
Edition : 2 |
Number of pages : 28 |
Technical Committee |
91.060.01
Elements of buildings in general
;
91.120.10
Thermal insulation of buildings
|
| ISO 6946:2017 |
Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
ISO 6946:2017 provides the method of calculation of the thermal resistance and thermal transmittance of building components and building elements, excluding doors, windows and other glazed units, curtain walling, components which involve heat transfer to the ground, and components through which air is designed to permeate.
The calculation method is based on the appropriate design thermal conductivities or design thermal resistances of the materials and products for the application concerned.
The method applies to components and elements consisting of thermally homogeneous layers (which can include air layers).
ISO 6946:2017 also provides an approximate method that can be used for elements containing inhomogeneous layers, including the effect of metal fasteners, by means of a correction term given in Annex F. Other cases where insulation is bridged by metal are outside the scope of ISO 6946:2017.
NOTE Table 1 in the Introduction shows the relative position of ISO 6946:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000‑1.
|
Published |
2017-06 |
Edition : 3 |
Number of pages : 40 |
Technical Committee |
91.060.01
Elements of buildings in general
;
91.120.10
Thermal insulation of buildings
|
| ISO/IEC 11801:2002/Cor 3:2008 |
Information technology — Generic cabling for customer premises — Technical Corrigendum 3 |
|
Withdrawn |
2008-09 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
35.200
Interface and interconnection equipment
|
| ISO/CD 7615-1 |
Energy performance of building systems — Underfloor air distribution systems — Part 1: Definitions, terminology, technical specifications and symbols |
The proposed standard is the first part of a comprehensive series of international standards related to energy performance of underfloor air distribution systems. This standard shall stipulate the definition, terminology, technical specification and symbols related to underfloor air distribution systems.
The new series of ISO standards will be composed of multiple parts as follows (tentatively).
-
Part 1: Definitions, terminology, technical specifications and symbols
Part 2: In-situ measurement of room air stratification
Part 3: In-situ measurement of thermal decay
Part 4: Determination of air permeability of underfloor plenum
This standard does not cover the conventional displacement ventilation system.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 9164:1989 |
Thermal insulation — Calculation of space heating requirements for residential buildings |
Identifies the terms in the heat balance equation, and describes a method for the calculation of the annual energy requirements for the space heating of residential buildings. The method cannot be applied to special buildings such as those incorporating passive solar design, greenhouses or sunspaces.
|
Withdrawn |
1989-08 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO/TR 9165:1988 |
Practical thermal properties of building materials and products |
Deals only with thermal characteristics of building materials and products related to thermal conductivity or thermal resistance. Gives the procedures needed to correct laboratory test values to practical values for these products.
|
Withdrawn |
1988-12 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
91.100.01
Construction materials in general
;
91.120.10
Thermal insulation of buildings
|
| ISO 9869-1:2014 |
Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 1: Heat flow meter method |
ISO 9869-1:2014 describes the heat flow meter method for the measurement of the thermal transmission properties of plane building components, primarily consisting of opaque layers perpendicular to the heat flow and having no significant lateral heat flow.
The properties which can be measured are:
a) the thermal resistance, R, and thermal conductance, Λ, from surface to surface;
b) the total thermal resistance, RT, and transmittance from environment to environment, U, if the environmental temperatures of both environments are well defined.
The heat flow meter measurement method is also suitable for components consisting of quasi homogeneous layers perpendicular to the heat flow, provided that the dimensions of any inhomogeneity in close proximity to the heat flow meter (HFM) is much smaller than its lateral dimensions and are not thermal bridges which can be detected by infrared thermography.
ISO 9869-1:2014 describes the apparatus to be used, the calibration procedure for the apparatus, the installation and the measurement procedures, the analysis of the data, including the correction of systematic errors and the reporting format.
|
Published |
2014-08 |
Edition : 1 |
Number of pages : 36 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 9869-2:2018 |
Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 2: Infrared method for frame structure dwelling |
This document describes the infrared method for measuring the thermal resistance and thermal transmittance of opaque building elements on existing buildings when observing high emissivity diffuse surface using an infrared (IR) camera. This document demonstrates a screening test by quantitative evaluation to identify the thermal performance defect area of building elements.
This document aims to measure the thermal transmittance (U-value) of a frame structure dwelling with light thermal mass, typically with a daily thermal capacity calculated according to ISO 13786 below 30 kJ/(m2K).
|
Published |
2018-08 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 9869-2:2018/Amd 1:2021 |
Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 2: Infrared method for frame structure dwelling — Amendment 1: Example of calculation of uncertainty analysis |
|
Published |
2021-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO/DIS 9869-3 |
Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method |
The method of observing the condition of the insulation layer with visual inspection and also themethod of measuring the thermal conduction or resistance of the insulation layer, of the buildingelements such as exterior wall, floor, ceiling, etc. (hereinafter, walls) in the field is described.The proposed method is divided into the quantitative method which measures the thermal resistanceand the thermal conductivity with the heat flow measurement, and the qualitative method without heatflow measurement. The former quantitative method can apply not only the insulation layer but alsowhole throughout wall.This document especially aims to test the furnished insulation layer in the walls. It demonstrates ascreening test with drilling a small diameter borehole through the walls with the presumed insulationlayer. Visual inspection with a borescope and measuring the temperature distribution by inserting thetemperature sensor, the qualitative futures of the insulation layer is evaluated. Adding themeasurement of the heat flow rate, thermal conductance (resistance) is quantitively evaluated.
|
Under development |
|
Edition : 1 |
Number of pages : 21 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 5004:1981 |
Earth-moving machinery — Method of test for the measurement of tool movement time |
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 9869:1994 |
Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance |
Describes the heat flowmeter method for the measurement of the thermal transmission properties (thermal resistance and thermal conductance from surface to surface, total thermal resistance and transmittance from environment to environment) of plane building components, primarily consisting of opaque layers perpendicular to the heat flow and having no significant lateral heat flow. In detail, describes the apparatus to be used, the calibration procedure for the apparatus, the installation and the measurement procedures, the analysis of the data, including the correction of systematic errors and the reporting format.
|
Withdrawn |
1994-07 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 9972:1996 |
Thermal insulation — Determination of building airtightness — Fan pressurization method |
|
Withdrawn |
1996-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|
| ISO 9972:2006 |
Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method |
ISO 9972:2006 is intended for the measurement of the air permeability of buildings or parts of buildings in the field. It specifies the use of mechanical pressurization or depressurization of a building or part of a building. It describes the measurement of the resulting air flow rates over a range of indoor-outdoor static pressure differences.
ISO 9972:2006 is intended for the measurement of the air leakage of building envelopes of single-zone buildings. For the purpose of ISO 9972:2006, many multi-zone buildings can be treated as single-zone buildings by opening interior doors or by inducing equal pressures in adjacent zones.
ISO 9972:2006 does not address evaluation of air permeability through individual components.
|
Withdrawn |
2006-05 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
91.120.10
Thermal insulation of buildings
|