| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 11429:1996 |
Ergonomics — System of auditory and visual danger and information signals |
Specifies a system of danger and information signals taking into account the different degrees of urgency. Applicable to all danger and information signals which have to be clearly perceived and differentiated as specified in ISO/TR 12100-2. Does not apply to certain fields covered by specific standards.
|
Published |
1996-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.180
Ergonomics
;
13.320
Alarm and warning systems
|
| ISO/TR 12295:2014 |
Ergonomics — Application document for International Standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and evaluation of static working postures (ISO 11226) |
ISO/TR 12295:2014 is an application document that guides users of the ISO 11228 series of International Standards, which address manual handling, and ISO 11226, which deals with static working postures. Specifically, it guides the user and provides additional information in the selection and use of the appropriate standards.
|
Published |
2014-04 |
Edition : 1 |
Number of pages : 58 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TR 12296:2012 |
Ergonomics — Manual handling of people in the healthcare sector |
ISO/TR 12296:2012 provides guidance for assessing the problems and risks associated with manual patient handling in the healthcare sector, and for identifying and applying ergonomic strategies and solutions to those problems and risks.
Its main goals are to improve caregivers' working conditions by decreasing biomechanical overload risk, thus limiting work-related illness and injury, as well as the consequent costs and absenteeism, and to account for patients' care quality, safety, dignity and privacy as regards their needs, including specific personal care and hygiene.
It is intended for all users (or caregivers and workers) involved in healthcare manual handling and, in particular, healthcare managers and workers, occupational safety and health caregivers, producers of assistive devices and equipment, education and training supervisors, and designers of healthcare facilities.
Its recommendations are primarily applicable to the movement of people (adults and children) in the provision of healthcare services in purposely built or adapted buildings and environments. Some recommendations can also be applied to wider areas (e.g. home care, emergency care, voluntary caregivers, cadaver handling).
The recommendations for patient handling take into consideration work organization, type and number of patients to be handled, aids, spaces where patients are handled, as well as caregivers' education and awkward postures, but do not apply to object (movement, transfer, pushing and pulling) or animal handling. Task joint analysis in a daily shift involving both patient handling, pulling and pushing or object handling and transport is not considered.
|
Published |
2012-06 |
Edition : 1 |
Number of pages : 91 |
Technical Committee |
13.180
Ergonomics
|
| ISO 12604-3:2022 |
Aircraft ground handling — Checked baggage — Part 3: Workstation ergonomics |
This document specifies the requirements for workstation ergonomic design of baggage handling agents for individual pieces of baggage checked-in by airline passengers at airports to be carried into aircraft cargo holds.
This document applies to all manual handling workplaces in the processing chain for sorting, safe handling and routing of the baggage (containers and bulk baggage, departure and arrival circuits, at terminal and at aircraft, excluding passenger check-in process and loading into aircraft cargo holds). This document doesn't apply to manual handling of odd-sized baggage.
This document does not specify the baggage handling systems in and out of airport terminals, except the baggage weights and dimensions to be handled and the critical characteristics of manual workstations.
This document does not specify the baggage handling systems in the aircraft.
|
Published |
2022-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.180
Ergonomics
;
49.100
Ground service and maintenance equipment
|
| ISO 12894:2001 |
Ergonomics of the thermal environment — Medical supervision of individuals exposed to extreme hot or cold environments |
|
Published |
2001-06 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
13.100
Occupational safety. Industrial hygiene
;
13.180
Ergonomics
|
| ISO 13406-1:1999 |
Ergonomic requirements for work with visual displays based on flat panels — Part 1: Introduction |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.180
Ergonomics
;
35.180
IT terminal and other peripheral equipment
|
| ISO 13406-2:2001 |
Ergonomic requirements for work with visual displays based on flat panels — Part 2: Ergonomic requirements for flat panel displays |
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 147 |
Technical Committee |
13.180
Ergonomics
;
35.180
IT terminal and other peripheral equipment
|
| ISO 13407:1999 |
Human-centred design processes for interactive systems |
|
Withdrawn |
1999-06 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
13.180
Ergonomics
|
| ISO 13731:2001 |
Ergonomics of the thermal environment — Vocabulary and symbols |
|
Published |
2001-12 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
13.180
Ergonomics
;
01.040.13
Environment. Health protection. Safety (Vocabularies)
|
| ISO 13732-1:2006 |
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
ISO 15536-1:2006 provides temperature threshold values for burns that occur when human skin is in contact with a hot solid surface. It also describes methods for the assessment of the risks of burning, when humans could or might touch hot surfaces with their unprotected skin.
In addition, ISO 13732-1:2006 gives guidance for cases where it is necessary to specify temperature limit values for hot surfaces, but does not set surface temperature limit values.
ISO 13732-1:2006 deals with contact periods of 0,5 s and longer.
It is applicable to contact when the surface temperature is essentially maintained during the contact.
It is not applicable if a large area of the skin (approximately 10 % or more of the skin of the whole body) can be in contact with the hot surface. Neither does it apply to skin contact of more than 10 % of the head or contact which could result in burns of vital areas of the face.
ISO 13732-1:2006 is applicable to the hot surfaces of all kind of objects: equipment, products, buildings, natural objects, etc. It is applicable to hot surfaces of products that may be touched by healthy adults, children, elderly people and also by people with physical disabilities. For the purposes of simplification, it mentions only products; nevertheless, it applies to all other objects as well. It is applicable to products used in any environment, e.g. in the workplace, in the home.
It does not provide data for the protection against discomfort or pain.
|
Published |
2006-09 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TS 13732-2:2001 |
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature |
This part of ISO/TS 13732 presents principles and methods for predicting the thermal sensation and degree of
discomfort for people where parts of the body are in contact with solid surfaces at moderate surface temperatures
(approximately 10 °C to 40 °C).
It deals with the thermal sensation for contacts of the hand, foot and for the sitting position on the floor.
|
Published |
2001-03 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.180
Ergonomics
|
| ISO 13732-3:2005 |
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces |
ISO 13732-3:2005 provides methods for the assessment of the risk of cold injury and other adverse effects when a cold surface is touched by bare-hand/finger skin. It provides ergonomics data for establishing temperature limit values for cold solid surfaces. The values established can be used in the development of special standards, where surface temperature limit values are required. Its data are applicable to all fields where cold solid surfaces cause a risk of acute effects: pain, numbness and frostbite, and are not limited to the hands but can be applied in general to the healthy human skin of male and female adults.
|
Published |
2005-12 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TS 14198:2012 |
Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems |
ISO/TS 14198:2012 provides procedures that can be used as a secondary task in a dual task setting to determine whether that evaluation setting is standardized and valid for purposes of assessing driver attentional demand due to the use of an in-vehicle system. It does not define calibration procedures for other evaluation activities that a laboratory might undertake.
ISO/TS 14198:2012 provides advice on the selection of an appropriate candidate calibration task, given an attentional demand evaluation procedure that uses primary driving-like task settings and procedures which are defined outside of ISO/TS 14198:2012.
|
Withdrawn |
2012-11 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO/TS 14198:2019 |
Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems |
This document provides procedures that can be used as a secondary task in a dual task setting to determine whether that evaluation setting is standardized and valid for purposes of assessing driver attentional demand due to the use of an in-vehicle system. This document does not define calibration procedures for other evaluation activities that a laboratory might undertake.
This document provides guidance on selecting a calibration task given a specific primary task. The primary tasks of interest include those that would be used in the evaluation of attentional demand. Such primary tasks are defined in other documents.
The description of a calibration task includes its application, experimental setup, data collection, and procedures for analysis of results.
The purpose of this document is not to define a reference criterion as to whether a given secondary task is suitable for use while driving. Although specific settings of parameters of a calibration task might be used to realize such a predefined pass/fail criterion, this document does not provide such a criterion for a given level of attentional demand.
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO/TS 14415:2005 |
Ergonomics of the thermal environment — Application of International Standards to people with special requirements |
ISO 14415:2005 provides background information on the thermal responses and needs of groups of persons with special requirements so that International Standards concerned with the assessment of the thermal environment can be appropriately applied for their benefit.
|
Withdrawn |
2005-04 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TS 14505-1:2007 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress |
ISO 14505-1:2007 gives guidelines for the assessment of thermal stress inside vehicles used for land, sea and air operation. It offers information about the assessment of hot, cold as well as moderate thermal environments by referring to different methods, as specified in International Standards, and specifying the constraints and necessary adjustments needed for the special case of vehicle climate assessment.
|
Published |
2007-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.180
Ergonomics
;
43.020
Road vehicles in general
|
| ISO 14505-2:2006 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature |
ISO 14505-2:2006 provides guidelines for the assessment of the thermal conditions inside a vehicle compartment. It can also be applied to other confined spaces with asymmetric climatic conditions. It is primarily intended for assessment of thermal conditions, when deviations from thermal neutrality are relatively small. Appropriate methodology as given in ISO 14505-2:2006 can be chosen for inclusion in specific performance standards for testing of HVAC-systems for vehicles and similar confined spaces.
|
Published |
2006-12 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
13.180
Ergonomics
;
43.020
Road vehicles in general
|
| ISO 14505-2:2006/Cor 1:2007 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature — Technical Corrigendum 1 |
|
Published |
2007-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.180
Ergonomics
;
43.020
Road vehicles in general
|
| ISO 14915-2:2003 |
Software ergonomics for multimedia user interfaces — Part 2: Multimedia navigation and control |
ISO 14915-2:2003 provides recommendations and requirements for the design of multimedia user interfaces with respect to the following aspects: design of the organization of the content, navigation and media-control issues. ISO 14915-2:2003 is limited to the design of the organization of the content and does not deal with the design of the content in general. Design issues within a single medium (e.g. the lighting of a film sequence) are only addressed with respect to the ergonomic issues related to user controls.
|
Published |
2003-07 |
Edition : 1 |
Number of pages : 33 |
Technical Committee |
13.180
Ergonomics
;
35.200
Interface and interconnection equipment
|
| ISO/FDIS 15535 |
General requirements for establishing anthropometric databases |
|
Under development |
|
Edition : 4 |
|
Technical Committee |
13.180
Ergonomics
|
| ISO 14505-3:2006 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 3: Evaluation of thermal comfort using human subjects |
ISO 14505-3:2006 gives guidelines and specifies a standard test method for the assessment, using human subjects, of thermal comfort in vehicles. It is not restricted to any particular vehicle but provides the general principles that allow assessment and evaluation. The method can be used to determine a measure of the performance of a vehicle for conditions of interest, in terms of whether it provides thermal comfort to people or not. This can be used in vehicle development and evaluation.
ISO 14505-3:2006 is applicable to all types of vehicles, including cars, buses, trucks, off-road vehicles, trains, aircraft, ships, submarines, and to the cabins of cranes and similar spaces. It applies where people are enclosed in a vehicle and when they are exposed to outside conditions. For those exposed to outside conditions, such as riders of bicycles or motorcycles, drivers of open sports cars and operators of fork lift trucks without cabins, vehicle speed and weather conditions can dominate responses. The principles of assessment, however, will still apply.
ISO 14505-3:2006 applies to both passengers and operators of vehicles where its application does not interfere with the safe operation of the vehicle.
|
Published |
2006-06 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.180
Ergonomics
;
43.020
Road vehicles in general
|
| ISO 14505-4:2021 |
Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 4: Determination of the equivalent temperature by means of a numerical manikin |
This document provides guidelines for extending the definition of equivalent temperature to predictive purposes and specifies a standard prediction method for the assessment of thermal comfort in vehicles using numerical calculations. Specifically, this document sets forth a simulated numerical manikin as a viable alternative to the thermal manikin for the purpose of calculating the equivalent temperature.
|
Published |
2021-09 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
13.180
Ergonomics
;
43.020
Road vehicles in general
|
| ISO 14738:2002 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
This International Standard establishes principles for deriving dimensions from anthropometric measurements and applying them to the design of workstations at non-mobile machinery. It is based on current ergonomic knowledge and anthropometric measurements.
This International Standard specifies the body's space requirements for equipment during normal operation in sitting and standing positions. This International Standard does not specifically include space demands for maintenance, repairing and cleaning work.
This International Standard does not give recommendations specifically for visual display terminal workstations at machinery. For this purpose ISO 9241-5 can be used in conjunction with this International Standard.
Situations where people are to be prevented from reaching a hazard are dealt with in ISO 13852.
|
Published |
2002-09 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 14738:2002/Cor 1:2003 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 1 |
|
Published |
2003-12 |
Edition : 1 |
|
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 14738:2002/Cor 2:2005 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 2 |
|
Published |
2005-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO/FDIS 14738 |
Safety of machinery — Anthropometric requirements for the design of workstations for industries and services |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 14915-1:2002 |
Software ergonomics for multimedia user interfaces — Part 1: Design principles and framework |
ISO 14915-1:2002 establishes design principles for multimedia user interfaces and provides a framework for handling the different considerations involved in their design. It addresses user interfaces for applications that incorporate, integrate and synchronize different media. This includes static media such as text, graphics or images, and dynamic media such as audio, animation, video or media related to other sensory modalities. Detailed design issues within a single medium (e.g. the graphical design of an animation sequence) are only addressed as far as they imply ergonomic consequences for the user.
ISO 14915-1:2002 gives requirements and recommendations for the ergonomic design of multimedia applications mainly intended for professional and vocational activities such as work or learning. It does not specifically address applications outside this area, such as entertainment, although some recommendations can also be applicable in such domains.
ISO 14915-1:2002 is applicable to software aspects related to multimedia user interfaces and does not address hardware or implementation issues. The ergonomic requirements and recommendations described in ISO 14915-1:2002 can be realized through very different techniques, e.g. the delivery system, a scripting language, or the application.
The focus of ISO 14915-1:2002 is on multimedia presentation issues. Multimodal input which uses different media such as speech in combination with pointing for entering information is not considered in the recommendations provided.
|
Withdrawn |
2002-11 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.180
Ergonomics
;
35.200
Interface and interconnection equipment
|
| ISO/CD TR 16710-1 |
Ergonomics methods — Part 1: Feedback method : a method to understand how end users perform their work with machines |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.180
Ergonomics
|
| ISO 2631:1978/Add 2:1982 |
Guide for the evaluation of human exposure to whole-body vibration — Addendum 2 |
|
Withdrawn |
1982-05 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 14915-3:2002 |
Software ergonomics for multimedia user interfaces — Part 3: Media selection and combination |
ISO 14915-3:2002 gives recommendations for, and guidance on, the design, selection and combination of interactive user interfaces that integrate and synchronize different media. It addresses user interfaces for applications that incorporate, integrate and synchronize different media. This includes static media such as text, graphics, images; and dynamic media such as audio, animation, video or media related to other sensory modalities. Detailed design issues within a single medium (e.g. the graphical design of an animation sequence) are only addressed as far as they imply ergonomic consequences for the user.
|
Withdrawn |
2002-10 |
Edition : 1 |
Number of pages : 46 |
Technical Committee |
13.180
Ergonomics
;
35.200
Interface and interconnection equipment
|
| ISO 15005:2002 |
Road vehicles — Ergonomic aspects of transport information and control systems — Dialogue management principles and compliance procedures |
This International Standard presents ergonomic principles for the design of the dialogues that take place between the driver of a road vehicle and the vehicle's transport information and control systems (TICS) while the vehicle is in motion. It also specifies compliance verification conditions for the requirements related to these principles.
This International Standard is applicable to TICSs consisting of either single or multiple devices, which can be either independent or interconnected. It is not applicable to TICSs without dialogues, TICS failures or malfunctions, or controls or displays used for non-TICS functions.
|
Withdrawn |
2002-07 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15005:2017 |
Road vehicles — Ergonomic aspects of transportation and control systems — Dialogue management principles and compliance procedures |
ISO 15005:2017 specifies ergonomic principles for the design of the dialogues that take place between the driver of a road vehicle and the vehicle's transport information and control systems (TICS) while the vehicle is in motion. It also specifies compliance verification conditions for the requirements related to these principles.
ISO 15005:2017 is applicable to TICS consisting of either single or multiple devices, which can be either independent or interconnected. It is not applicable to TICS without dialogues, TICS failures or malfunctions, or controls or displays used for non-TICS functions.
The requirements and recommendations of this document can be reconsidered for drivers with special needs.
|
Published |
2017-02 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15006:2011 |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications for in-vehicle auditory presentation |
This International Standard establishes ergonomic specifications for the presentation of auditory information related to transport information and control systems (TICS) through speech or sounds. It applies primarily to the use of auditory displays to the driver when the vehicle is in motion, but it may also be applied when the vehicle is stationary. It presents a set of requirements and recommendations for in-vehicle auditory signals from TICS, and provides characteristics and functional factors for maximizing auditory signal intelligibility and utility while helping prevent auditory or mental overload.
|
Published |
2011-10 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
13.180
Ergonomics
;
35.240.60
IT applications in transport
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15007-1:2002 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters |
|
Withdrawn |
2002-03 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15007-1:2014 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters |
ISO 15007-1:2014 defines key terms and parameters applied in the analysis of driver visual behaviour focused on glance and glance-related measures. These terms and parameters can be applied in environments from real-world driving experiments to laboratory-based driving simulator studies.
The procedures described in this part of ISO 15007 could also apply to more general assessments of driver visual behaviour without the introduction of TICS-specific systems. The parameters and definitions described below are intended to assist development of a common source of reference for driver visual behaviour data.
Minimum requirements for reporting the results of Transport Information and Control Systems (TICS) evaluations are provided.
Further guidance including the specification of how to analyse and present the results of studies of visual behaviour is available in other ISO publications (see, for example, ISO 2854 and ISO/TR 13425:2006). However, data collected and analysed according to this standard will allow comparisons to be performed across different TICS applications and experimental scenarios.
|
Withdrawn |
2014-11 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 7341:2005 |
Banking — Nostro accounts reconciliation |
ISO 7341:2005 specifies the data to be contained on a loro account statement (also known as vostro account), and the format of such data. It also provides rules for the creation, transmission and reconciliation of statements, and for the handling of references.
|
Withdrawn |
2005-02 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
03.060
Finances. Banking. Monetary systems. Insurance
|
| ISO/TS 15007-2:2001 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures |
This Technical Specification gives guidelines on equipment and procedures for analyzing driver visual behaviour, intended to enable assessors of Transport Information and Control Systems (TICS) to
plan evaluation trials,specify (and install) data capture equipment, andanalyse, interpret and report visual-behaviour metrics (standards of measurement).
It is applicable to both road trials and simulated driving environments. It is not applicable to the assessment of head-up displays.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO/TS 15007-2:2014 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures |
ISO/TS 15007-2:2014 gives guidelines on equipment and procedures for analysing driver visual behaviour, intended to enable assessors of transport information and control systems (TICS) to
plan evaluation trials;
specify (and install) data capture equipment, and;
validate, analyse, interpret and report visual-behaviour metrics (standards of measurement).
It is applicable to both road trials and simulated driving environments.
|
Withdrawn |
2014-09 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15007:2020 |
Road vehicles — Measurement and analysis of driver visual behaviour with respect to transport information and control systems |
This document defines key terms and parameters applied in the analysis of driver visual behaviour focused on glance and glance-related measures. It provides guidelines and minimum requirements on equipment and procedures for analysing driver visual behaviour including assessment of TICS to:
— plan evaluation trials;
— specify (and install) data capture equipment; and
— validate, analyse, interpret and report visual-behaviour metrics (standards of measurement).
The parameters and definitions described below provide a common source of reference for driver visual behaviour data.
It is applicable to on-road trials (e.g. field operational tests or naturalistic studies), and laboratory-based driving studies. The procedures described in this document can also apply to more general assessments of driver visual behaviour. Data collected and analysed according to this document will allow comparisons to be performed across different TICS applications and experimental scenarios.
|
Published |
2020-08 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15008:2003 |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and compliance procedures for in-vehicle visual presentation |
ISO 15008:2003 gives minimum specifications for the image quality and legibility of displays containing dynamic (changeable) visual information presented to the driver of a road vehicle by an on-board transport information and control system (TICS) used while the vehicle is in motion. These specifications are intended to be independent of display technologies, while test methods and measurements for assessing compliance with them have been included where necessary.
ISO 15008:2003 is applicable to mainly perceptual, and some basic cognitive, components of the visual information: these include character legibility and colour recognition. It is not applicable to other factors affecting performance and comfort such as coding, format and dialogue characteristics, nor to displays using the following: superimposed information on the external field (e.g. head-up displays), pictorial images (e.g. closed-circuit TV for reversing), maps and topographic representations (e.g. those for setting navigation systems), static information (e.g. control labels, telltales).
|
Withdrawn |
2003-03 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15008:2009 |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation |
ISO 15008:2009 specifies minimum requirements for the image quality and legibility of displays containing dynamic (changeable) visual information presented to the driver of a road vehicle by on-board transport information and control systems (TICS) used while the vehicle is in motion. These requirements are intended to be independent of display technologies, while reference to test methods and measurements for assessing compliance with them have been included where necessary.
ISO 15008:2009 is applicable to mainly perceptual, and some basic cognitive, components of the visual information, including character legibility and colour recognition. It is not applicable to other factors affecting performance and comfort such as coding, format and dialogue characteristics, or to displays using
characters presented as a part of a symbol or pictorial information,
superimposed information on the external field (e.g. head-up displays),
pictorial images (e.g. rear view camera),
maps and topographic representations (e.g. those for setting navigation systems), or
quasi-static information.
|
Withdrawn |
2009-02 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15535:2006 |
General requirements for establishing anthropometric databases |
ISO 15535:2006 specifies general requirements for anthropometric databases and their associated reports that contain measurements taken in accordance with ISO 7250. It provides necessary information, such as characteristics of the user population, sampling methods, measurement items and statistics, to make international comparison possible among various population segments. The population segments specified in ISO 15535:2006 are people who are able to hold the postures specified in ISO 7250.
|
Withdrawn |
2006-12 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
13.180
Ergonomics
|
| ISO 15008:2017 |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation |
ISO 15008:2017 specifies minimum requirements for the image quality and legibility of displays containing dynamic (changeable) visual information presented to the driver of a passenger car by on-board transport information and control systems (TICS) used while the vehicle is in motion. Heavy vehicles are excluded for the requirements of contrast and font size since these chapters reference ISO 4513 which is only applicable for passenger vehicles. These requirements are intended to be independent of display technologies. Reference to test methods and measurements for assessing compliance with them have been included where necessary.
ISO 15008:2017 is applicable mainly to perceptual, and some basic cognitive, components of the visual information, including character legibility and colour recognition. It is not applicable to other factors affecting performance and comfort, such as coding, format and dialogue characteristics, or to displays using:
- characters presented as a part of a symbol or pictorial information (e.g.CD symbol);
- superimposed information on the external field (e.g. head-up displays);
- pictorial images (e.g. rear view camera);
- maps and topographic representations (e.g. those for setting navigation systems); or
- quasi-static information (e.g. AM/PM, km/miles, kPa/PSI, On/Off information).
|
Published |
2017-09 |
Edition : 3 |
Number of pages : 25 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 15265:2004 |
Ergonomics of the thermal environment — Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions |
ISO 15265:2004 describes a strategy for assessing and interpreting the risk of physiological constraints, or of discomfort, while working in a given climatic environment.
It is applicable in any working situation with steady or varying conditions of the climate, metabolic rate or clothing.
ISO 15265:2004 does not describe a single procedure, but a strategy in three stages that can be used successively to gain deeper insight in the working conditions, as it is needed to draw the most appropriate conclusions about the risk involved and identify the best control and prevention measures.
It is definitely oriented towards the prevention and/or control of these working problems in the heat or cold. The risk of heat or cold disorders and/or discomfort is therefore assessed only to the extent that it is required to reach this goal.
|
Published |
2004-08 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.180
Ergonomics
|
| ISO 15534-1:2000 |
Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
|
Published |
2000-02 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15534-2:2000 |
Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
This part of ISO 15534 specifies the dimensions of openings for access into machinery as defined in
ISO/TR 12100-1. It provides the dimensions to which the values given in ISO 15534-3 are applicable. Values for
additional space requirements are given in annex A. This part of ISO 15534 has been prepared primarily for nonmobile
machinery; there may be additional specific requirements for mobile machinery.
Dimensions for access openings are based on the values for the 95th percentile, whereas reach distances are
based on the values for the 5th percentile, in each case the least favourable body dimension of the expected user
population being used as a basis. The same considerations apply to the location of access openings.
The anthropometric data given in ISO 15534-3 originate from static measurements of nude persons and do not
take into account body movements, clothing, equipment, machinery-operating conditions or environmental
conditions.
This part of ISO 15534 shows how to combine the anthropometric data with suitable allowances to take these
factors into account.
Situations where people are to be prevented from reaching a hazard are dealt with in ISO 13852.
|
Published |
2000-02 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15534-3:2000 |
Ergonomic design for the safety of machinery — Part 3: Anthropometric data |
This part of ISO 15534 specifies current requirements for human body measurements (anthropometric data) that are
required by ISO 15534-1 and ISO 15534-2 for the calculation of access-opening dimensions as applied to machinery.
The anthropometric data originate from static measurements of nude persons and do not take into account body
movements, clothing, equipment, machinery-operating conditions or environmental conditions.
The data are based on information from anthropometric surveys representative of population groups within Europe
comprising at least three million people. Both men and women are taken into account.
Measurements are given, as required by ISO 15534-1 and ISO 15534-2, for the 5th, 95th and 99th percentiles of the
relevant population group within Europe.
|
Published |
2000-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15535:2003 |
General requirements for establishing anthropometric databases |
ISO 15535:2003 specifies general requirements for anthropometric databases and their associated reports that contain measurements taken in accordance with ISO 7250.
It provides necessary information, such as characteristics of the user population, sampling methods, measurement items and statistics, to make international comparison possible among various population segments. The population segments specified in ISO 15535:2003 are people who are able to hold the postures specified in ISO 7250.
|
Withdrawn |
2003-05 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
13.180
Ergonomics
|
| ISO 15536-1:2005 |
Ergonomics — Computer manikins and body templates — Part 1: General requirements |
ISO 15536-1:2005 establishes the general requirements for the design and development of computer manikins, body templates and manikin systems. It addresses their anthropometric and biomechanical properties, taking into account their usability and restrictions for structural complexity and functional versatility, and is also intended as a guide for the selection of manikins and manikin systems and for the evaluation of their accuracy and usability for the specified use. It specifies the documentation of the characteristics of manikins and manikin systems and their intended use, for the guidance of their users. It provides means for ensuring that computer manikins and body templates for the design of work space are appropriately accurate and reliable in their anthropometric and biomechanical aspects. It aims to ensure that users of manikins are able to choose an appropriate manikin system for particular design tasks and use it in an appropriate way. It sets requirements only on the static accuracy of the manikin, but provides recommendations on the other factors that can influence the accuracy of the analyses and determinations performed using them.
|
Published |
2005-05 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.180
Ergonomics
|
| ISO 15536-2:2007 |
Ergonomics — Computer manikins and body templates — Part 2: Verification of functions and validation of dimensions for computer manikin systems |
ISO 15536-2:2007 establishes the requirements for the verification of the functions and validation of dimensions of computer manikins. These requirements concern the documentation of the data employed to construct computer manikins and the methods employed to verify and validate their functions with regards to their dimensional accuracy.
ISO 15536-2:2007 extends to anthropometric and biomechanical data and to software functions as they are applied to create computer manikins. Although this document primarily refers to anthropometric data and methods, some biomechanical parameters are required to build and apply computer manikins and are therefore included.
ISO 15536-2:2007 provides a framework for reporting computer manikin accuracy and human-source data. The standard is intended to enable even non-specialist users of the manikin systems to independently perform measurements of each function under field testing conditions using automated software tools provided by developers.
It is not intended to require developers to perform specific verification and validation of their manikin systems.
|
Published |
2007-03 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.180
Ergonomics
|
| ISO 15537:2004 |
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs |
ISO 15537:2004 establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test.
ISO 15537:2004 is applicable to the testing of anthropometric aspects of industrial products and designs having direct contact with the human body or dependent on human body measurements, e.g. machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces, architectural details or transportation equipment.
ISO 15537:2004 is also applicable to the testing of such safety aspects of products that are dependent on human body measurements. It does not deal with other aspects of the task or other requirements, such as perception of information (except geometrical arrangement of the viewing targets) and the use of controls (except their geometrical placement).
|
Withdrawn |
2004-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15537:2022 |
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs |
This document establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test.
This document is applicable to the testing of anthropometric aspects of industrial products and designs having direct contact with the human body or dependent on human body measurements, such as machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces, architectural details or transportation equipment.
This document is also applicable to the testing of such safety aspects of products that are dependent on human body measurements. It does not deal with other aspects of the task or other requirements, such as perception of information (except geometrical arrangement of the viewing targets) and the use of controls (except their geometrical placement).
Although this document deals with selecting test persons from an anthropometric perspective, similar general principles can be applied for other test variables, e.g. biomechanical aspects.
|
Published |
2022-05 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15743:2008 |
Ergonomics of the thermal environment — Cold workplaces — Risk assessment and management |
ISO 15743:2008 presents a strategy and practical tools for assessing and managing cold risk in the workplace, and includes: models and methods for cold risk assessment and management; a checklist for identifying cold-related problems at work; a model, method and questionnaire intended for use by occupational health care professionals in identifying those individuals with symptoms that increase their cold sensitivity and, with the aid of such identification, offering optimal guidance and instructions for individual cold protection; guidelines on how to apply thermal standards and other validated scientific methods when assessing cold‑related risks; a practical example from cold work.
It is applicable to both indoor and outdoor work situations — indoor work includes work done inside vehicles, outdoor work both inland and offshore work — but is not applicable to diving situations or other types of work performed underwater.
|
Published |
2008-07 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
13.180
Ergonomics
|
| ISO 7746:1988 |
Banking — Telex formats for inter-bank messages |
|
Withdrawn |
1988-04 |
Edition : 1 |
Number of pages : 50 |
Technical Committee |
03.060
Finances. Banking. Monetary systems. Insurance
|
| ISO/TS 16071:2003 |
Ergonomics of human-system interaction — Guidance on accessibility for human-computer interfaces |
ISO/TS 16071:2002 provides guidance on the design of accessible (work, home, education) software. It covers issues associated with designing accessible software for people with the widest range of visual, hearing, motor and cognitive abilities, including those who are elderly and temporarily disabled. ISO/TS 16071:2002 addresses software considerations for accessibility that complement general design for usability covered by ISO 9241-10 to ISO 9241-17 and ISO 13407.
ISO/TS 16071:2002 addresses the accessibility of interactive systems. It addresses a wide range of solutions, including office applications, web pages and multimedia. It does not provide recommendations for the design of hardware.
ISO/TS 16071:2002 promotes increased usability of systems in combination with assistive technologies, when they are required. It does not cover the behaviour or requirements of assistive technologies themselves (including assistive software).
|
Withdrawn |
2003-02 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
13.180
Ergonomics
|
| ISO 16121-1:2005 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements |
ISO 16121-1:2005 applies to the driver's workplace in low-floor line-service buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum weight exceeding five metric tonnes and an overall width exceeding 2,30 m.
It contains basic requirements for an ergonomic and comfortable seating position, which is essential to keep drivers in a good state of health. The dimensions and mounting positions of driver's seat, pedals and steering have to be carefully chosen, to enable drivers to sit in an ergonomic seating position, i.e. sitting at angles which comply with the given ranges of comfort and to allow some variation when seated.
|
Withdrawn |
2005-10 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.180
Ergonomics
;
43.080.20
Buses
|
| ISO 16121-1:2012 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements |
ISO 16121-1:2012 applies to the driver's workplace in low-floor line-service buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum weight exceeding five metric tonnes and an overall width exceeding 2,30 m.
ISO 16121-1:2012 contains basic requirements for an ergonomic and comfortable seating position, which is essential to keep drivers in a good state of health. The dimensions and mounting positions of a driver's seat, pedals and steering should be carefully chosen to enable drivers to sit in an ergonomic seating position, i.e. sitting at angles which comply with the given ranges of comfort and to allow some variation when seated.
|
Published |
2012-10 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
13.180
Ergonomics
;
43.080.20
Buses
|
| ISO 16121-2:2005 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility |
ISO 16121-2:2005 applies to the driver's workplace in low-floor line-service buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum weight exceeding five metric tonnes and an overall width exceeding 2,30 m.
ISO 16121-2:2005 gives the requirements for the driver's field of view to the area in front of the vehicle, to the entrance opposite the driver's seat and the interior compartment.
|
Withdrawn |
2005-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.180
Ergonomics
;
43.080.20
Buses
|
| ISO 16121-2:2011 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility |
ISO 16121-2:2011 specifies the requirements for the driver's field of view to the area in front of the vehicle, to the entrance opposite the driver's seat and the interior compartment.
ISO 16121-2:2011 applies to the driver's workplace in low-floor line-service buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum weight exceeding five metric tonnes and an overall width exceeding 2,30 m.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
13.180
Ergonomics
;
43.080.20
Buses
|
| ISO 16121-3:2005 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls |
ISO 16121-3:2005 applies to the driver's workplace in low-floor buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum weight exceeding five metric tons and a maximum width exceeding 2,30 m.
It gives the requirements for the location of information devices and controls.
|
Withdrawn |
2005-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.180
Ergonomics
;
43.080.20
Buses
|
| ISO 16121-3:2011 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls |
ISO 16121-3:2011 specifies requirements for the location of information devices and controls.
ISO 16121-3:2011 applies to the driver's workplace in low-floor buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum weight exceeding five metric tonnes and a maximum width exceeding 2,30 m.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
13.180
Ergonomics
;
43.080.20
Buses
|
| ISO 16121-4:2005 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment |
ISO 16121-4:2005 applies to the driver's workplace in low-floor line-service buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum weight exceeding five metric tonnes and an overall width exceeding 2,30 m.
It gives the minimum requirements for the cabin environment.
|
Withdrawn |
2005-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.180
Ergonomics
;
43.080.20
Buses
|
| ISO 16121-4:2011 |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment |
ISO 16121-4:2011 specifies minimum requirements for the cabin environment.
ISO 16121-4:2011 applies to the driver's workplace in low-floor line-service buses designed for the carriage of passengers, comprising more than eight seats in addition to the driver's seat, and having a maximum weight exceeding five metric tonnes and an overall width exceeding 2,30 m.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
13.180
Ergonomics
;
43.080.20
Buses
|
| ISO/TR 16352:2005 |
Road vehicles — Ergonomic aspects of in-vehicle presentation for transport information and control systems — Warning systems |
ISO/TR 16352:2005 provides a literature survey about the human-machine interface of warning systems in vehicles. It covers the experimental experiences about the efficiency and acceptance of different modalities and combinations of warnings, and the design of the sensorial, code and organizational parameters of visual, auditory and tactile warnings.
|
Published |
2005-12 |
Edition : 1 |
Number of pages : 128 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 16505:2015 |
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures |
ISO 16505:2015 gives minimum safety, ergonomic, and performance requirements for Camera Monitor Systems to replace mandatory inside and outside rearview mirrors for road vehicles. It addresses Camera Monitor Systems (CMS) that will be used in road vehicles to present the required outside information of a specific field of view inside the vehicle. These specifications are intended to be independent of different camera and display technologies unless otherwise stated explicitly. ADAS Systems (such as parking aid) are not part of ISO 16505:2015.
|
Withdrawn |
2015-05 |
Edition : 1 |
Number of pages : 146 |
Technical Committee |
13.180
Ergonomics
;
43.040.10
Electrical and electronic equipment
|
| ISO 16505:2019 |
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures |
This document gives minimum safety, ergonomic, and performance requirements for Camera Monitor Systems to replace mandatory inside and outside rearview mirrors for road vehicles (e.g. classes I to IV as defined in UN Regulation No. 46). It addresses Camera Monitor Systems (CMS) that will be used in road vehicles to present the required outside information of a specific field of view inside the vehicle. These specifications are intended to be independent of different camera and display technologies unless otherwise stated explicitly. Advanced driver assistance systems (ADAS), such as parking aids, are not part of this document.
NOTE 1 Mirror classes V and VI (as defined in UN Regulation No. 46) are not in scope of this document since the requirements are already defined in UN Regulation No. 46.
NOTE 2 The definitions and requirements in this document are formulated with regard to a system structure, where one camera captures one legally prescribed field of view and one monitor displays one legally prescribed field of view. Of course, also other system structures (e.g. with one monitor displaying two legally prescribed fields of view) are within the scope of this document. For those systems, either the system supplier or the vehicle manufacturer has to prove that the resulting system fulfils the requirements given in Clause 6.
NOTE 3 Whenever the phrases "field of view" or "field of vision" are used, then both have the same meaning and are to be used in parallel.
|
Published |
2019-07 |
Edition : 2 |
Number of pages : 149 |
Technical Committee |
13.180
Ergonomics
;
43.040.10
Electrical and electronic equipment
|
| ISO 16505:2019/Amd 1:2021 |
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures — Amendment 1: ORP, FeV, MTF10MIN(1:1)/hor, MTF10MIN(1:1)/ver |
|
Published |
2021-07 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
13.180
Ergonomics
;
43.040.10
Electrical and electronic equipment
|
| ISO 16673:2007 |
Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems |
ISO 16673:2007 provides a procedure for measuring visual demand due to the use of visual or visual-manual interfaces accessible to the driver while the vehicle is in motion. It applies to both Original Equipment Manufacturer (OEM) and After-Market in-vehicle systems. It applies to both permanently installed and portable systems. It applies to any means of visual occlusion and is not dependent on one specific physical implementation.
|
Withdrawn |
2007-04 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO 16673:2017 |
Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems |
ISO 16673:2017 provides a procedure for measuring visual demand due to the use of visual or visual-manual interfaces accessible to the driver while the vehicle is in motion. It applies to both original equipment manufacturer (OEM) and after-market in-vehicle systems. It applies to both permanently installed and portable systems. It applies to any means of visual occlusion and is not dependent on one specific physical implementation.
|
Published |
2017-09 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO/TS 16951:2004 |
Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers |
ISO/TS 16951:2004 provides formal procedures and two alternative methods for determining the priority of on-board messages presented to drivers of road vehicles by transport information and control systems (TICS), and other systems. It is applicable to the whole range of TICS in-vehicle messages, including traveller information, navigation, travel and traffic advisories, "yellow pages" information, warnings, systems status, emergency calling system information, and electronic toll/fee collection, as well as to messages from non-TICS sources such as telephone, warnings and telltales.
|
Withdrawn |
2004-03 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
13.180
Ergonomics
;
35.240.60
IT applications in transport
;
43.040.15
Car informatics. On board computer systems
|
| ISO/TS 16951:2021 |
Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers |
This document provides formal procedures and two, alternative, methods (users are advised to choose whichever of the two suits their individual requirements) for determining the priority of on-board messages presented to drivers of road vehicles by transport information and control systems (TICS) and other systems. It is applicable to the whole range of TICS in-vehicle messages, including traveller information, navigation, travel and traffic advisories, "yellow pages" information, warnings, systems status, emergency calling system information, and electronic toll/fee collection, as well as to messages from non-TICS sources such as telephone, warnings and telltales. Although applicable to systems that allow the free generation of messages, it neither provides guidance on how to use the messages deriving from its procedures nor is it applicable to mandatory or legally required messages.
|
Published |
2021-03 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
13.180
Ergonomics
;
35.240.60
IT applications in transport
;
43.040.15
Car informatics. On board computer systems
|
| ISO/TR 16982:2002 |
Ergonomics of human-system interaction — Usability methods supporting human-centred design |
ISO/TR 16982:2002 provides information on human-centred usability methods which can be used for design and evaluation. It details the advantages, disadvantages and other factors relevant to using each usability method.
It explains the implications of the stage of the life cycle and the individual project characteristics for the selection of usability methods and provides examples of usability methods in context.
The main users of ISO/TR 16982:2002 will be project managers. It therefore addresses technical human factors and ergonomics issues only to the extent necessary to allow managers to understand their relevance and importance in the design process as a whole.
Such issues are dealt with more fully in ISO 9241 which is complementary to ISO/TR 16982:2002 and is aimed at system developers, specifiers and purchasers of systems. Nonetheless, all parties involved in human-centred system development, including the end users of systems, should find the guidance in ISO/TR 16982:2002 relevant.
The guidance in ISO/TR 16982:2002 can be tailored for specific design situations by using the lists of issues characterizing the context of use of the product to be delivered. Selection of appropriate usability methods should also take account of the relevant life-cycle process.
ISO/TR 16982:2002 is restricted to methods that are widely used by usability specialists and project managers.
It does not specify the details of how to implement or carry out the usability methods described.
NOTE Most methods require the involvement of human-factors specialists. It may be inappropriate for them to be used by individuals without adequate skills and knowledge.
|
Published |
2002-06 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
13.180
Ergonomics
|
| ISO 17049:2013 |
Accessible design — Application of braille on signage, equipment and appliances |
ISO 17049:2013 specifies the fundamental requirements for braille used on signage, equipment and appliances, including the dimensional parameters of braille and the characteristics of materials used, and the guidelines for practical implementation.
|
Published |
2013-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.180
Ergonomics
;
11.180.30
Aids for blind or partially sighted people
|
| ISO 17069:2014 |
Accessible design — Consideration and assistive products for accessible meeting |
ISO 17069:2014 specifies considerations to be taken, as well as support and assistive products that can be used when organizing a physical meeting in which older persons and persons with disabilities can actively participate.
Teleconferences and web conferences are important methods that can be used to include older persons and persons with disabilities in meetings.
|
Withdrawn |
2014-10 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.180
Ergonomics
;
11.180.01
Aids for disabled and handicapped persons in general
|
| ISO 17069:2020 |
Accessible design — Consideration and assistive products for accessible meeting |
This document specifies considerations to be taken, as well as support and assistive products that can be used when organizing a physical meeting in which older persons and persons with disabilities can actively participate.
Teleconferences and web conferences are important methods that can be used to include older persons and persons with disabilities in meetings.
|
Published |
2020-09 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
13.180
Ergonomics
;
11.180.01
Aids for disabled and handicapped persons in general
|
| ISO/TS 21144:2016 |
Ergonomics of human-system interaction — Electronic paper display — Indoor use |
ISO/TS 21144:2016 establishes test methods for evaluating electronic paper display (EPD) when used in indoor tasks and environments. It is intended to be applied together with the measurement procedures of ISO 9241-305 and the generic requirements of ISO 9241-303 to define compliance routes suitable for EPD.
|
Withdrawn |
2016-08 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.180
Ergonomics
;
31.120
Electronic display devices
|
| ISO/CD 17097 |
3-D digital human body scan data — Part 1: Terminologies and methodologies for processing of human scan data |
This standard specifies terms, methods, and consideration related to the processing of scan data using software after acquiring human body scan data using a 3-D human body scanner. Digital three-dimensional (3-D) human body scan data are obtained by digitizing the 3-D shape of the human body collected through a 3-D scanner in the form of point cloud. The collected point cloud data are processed using a digital 3-D scan data processing program and then used for anthropometric measurement, body shape analysis, and/or ergonomic product design. This standard will be useful for the software developers when they develop scan data processing software. It could also be helpful for anthropometric researchers and product designers when they establish 3-D human body scan databases to analyze the human body shape and size.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.180
Ergonomics
;
01.040.13
Environment. Health protection. Safety (Vocabularies)
|
| ISO 17287:2003 |
Road vehicles — Ergonomic aspects of transport information and control systems — Procedure for assessing suitability for use while driving |
ISO 17287:2003 specifies a procedure for assessing whether specific TICS, or a combination of TICS with other in-vehicle systems, are suitable for use by drivers while driving. It addresses user-oriented TICS description and context of use, TICS task description and analysis, assessment process, and documentation.
The TICS description and context of use includes consideration of improper use, reasonably foreseeable misuse and TICS failure. The TICS description, analysis and assessment include a process for identifying and addressing suitability issues.
ISO 17287:2003 does not recommend specific variables for assessing suitability nor does it define criteria for establishing the suitability of use of a TICS Table while driving.
|
Published |
2003-04 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO/TS 17929:2014 |
Biomechanical effects on amusement ride passengers |
ISO 17929:2014 has been drawn up with the objective of ensuring the safety of amusement ride passengers, based on the international experience of manufacture and operation of such structures throughout the world gained over decades prior to its publication.
It enables the identification of potential hazards and classification of biomechanical effects, including information on recommended acceleration limits, rate of their onset and their duration, to ensure acceptable degrees of biomechanical risks at the stage of amusement ride design, as well as to take such risks into account during development of operational procedures and information on use limitations for amusement ride guests.
It gives recommendations regarding use limitations for amusement rides in accordance with the health condition and the well-being of passengers. It also specifies body dimensions of passengers 1,20 m to 2,0 m in height for motion risk analysis on amusement rides. These body dimensions can be taken into account when designing passenger containments and restraints.
It does not cover devices used in the circus, theatre or sports, or other devices intended for use only by specially trained people. Nevertheless, it can be used in the design of any similar structural or passenger-carrying device even if it does not explicitly mention the device.
ISO 17929:2014 is not applicable to amusement rides put into operation before the date of its publication.
|
Published |
2014-09 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
13.180
Ergonomics
;
97.200.40
Playgrounds
|
| ISO/PAS 18152:2003 |
Ergonomics of human-system interaction — Specification for the process assessment of human-system issues |
ISO/PAS 18152:2003 presents a human-systems (HS) model for use in ISO/IEC 15504-conformant assessment of the maturity of an organization in performing the processes that make a system usable, healthy and safe. It describes processes that address human-system issues and the outcomes of these processes. It details the practices and work products associated with achieving the outcomes of each process.
|
Withdrawn |
2003-10 |
Edition : 1 |
Number of pages : 92 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TS 18152:2010 |
Ergonomics of human-system interaction — Specification for the process assessment of human-system issues |
ISO/TS 18152:2010 presents a human-systems (HS) model for use in ISO/IEC 15504-conformant assessment of the maturity of an organization in performing the processes that make a system usable, healthy and safe. It describes processes that address human-system issues and the outcomes of these processes. It details the practices and work products associated with achieving the outcomes of each process.
|
Published |
2010-06 |
Edition : 1 |
Number of pages : 92 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TR 18529:2000 |
Ergonomics — Ergonomics of human-system interaction — Human-centred lifecycle process descriptions |
|
Withdrawn |
2000-06 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
13.180
Ergonomics
|
| ISO 19026:2015 |
Accessible design — Shape and colour of a flushing button and a call button, and their arrangement with a paper dispenser installed on the wall in public restroom |
ISO 19026:2015 specifies shapes and colours of a flushing button and a call button of lavatory which are installed on the wall and their arrangement with a paper dispenser. This International Standard is only applicable in case of installing a flushing button and/or a call button on the wall of seat-type lavatory in public restrooms (general toilet compartments and toilet compartments with various functions) used by an unspecified large number of people, except restrooms with a big paper holder where it is difficult to place a flushing button and a call button above the holder, and Type A toilet with lateral transfer from both sides of ISO 21542.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.180
Ergonomics
;
91.040.10
Public buildings
|
| ISO 19027:2016 |
Design principles for communication support board using pictorial symbols |
ISO 19027:2016 specifies basic configurations for communication support boards, which are necessary to facilitate communication. A variety of communication support boards can be designed for specific communication purposes.
This International Standard specifies basic elements common to different types of formats/media, such as simple boards, book style or digital media. This International Standard does not regulate any specific design or any specific pictorial symbols for communication support boards.
As for design principles of pictorial symbols, this International Standard introduces examples of design principles applicable when designing and developing pictorial symbols.
NOTE Examples of basic pattern used to create pictorial symbols are shown in Annex A. Examples of communication support boards using pictorial symbols are shown in Annexes B and C.
|
Published |
2016-01 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
13.180
Ergonomics
|
| ISO 19028:2016 |
Accessible design — Information contents, figuration and display methods of tactile guide maps |
ISO 19028:2016 specifies information contents, figuration and display methods of tactile guide maps providing location information of buildings, including those for the general public, public transport and parks, and also the surroundings in the close vicinity, including access routes to them in order to enable persons with seeing impairment and blindness to move safely and smoothly in those facilities.
|
Published |
2016-04 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
13.180
Ergonomics
;
11.180.30
Aids for blind or partially sighted people
|
| ISO 19029:2016 |
Accessible design — Auditory guiding signals in public facilities |
ISO 19029:2016 specifies the sound characteristics of auditory guiding signals for persons with seeing impairment and blindness to provide the location and direction information of particular public facilities. The public facilities include facilities such as railway stations, airports, ports, bus terminals, government offices, libraries, community centres, parks, schools, hospitals, theatres, large supermarkets, and its toilets, stairs, etc.
EXAMPLE As an auditory guiding signal, a chime sound is emitted from the ticket gate of a railway station. Pedestrians, including persons with seeing impairment and blindness, are able to know the location of the ticket gate by detecting the location of the chime sound.
NOTE 1 The auditory guiding signals are also helpful for sighted persons.
ISO 19029:2016 also specifies the design or usage of the equipment that provides auditory guiding signals.
ISO 19029:2016 does not specify the characteristics of the alerts, such as alarm sounds or emergency signals.
NOTE 2 The auditory danger signals are covered by ISO 7731.
ISO 19029:2016 does not specify the characteristics of auditory guiding signals coming from the personal mobile equipment that is worn by persons with seeing impairment and blindness.
|
Published |
2016-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.180
Ergonomics
;
11.180.15
Aids for deaf and hearing impaired people
|
| ISO/TR 19358:2002 |
Ergonomics — Construction and application of tests for speech technology |
ISO/TR 19358:2002 deals with the testing and assessment of speech-related products and services, and is intended for use by specialists active in the field of speech technology, as well as purchasers and users of such systems.
|
Published |
2002-10 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TR 20278:2015 |
Unwanted reflections from the active and inactive areas of display surfaces visible during use |
ISO/TR 20278:2015 provides users a summary of the existing knowledge about ergonomics requirements for unwanted reflections on electronic displays. The document furthermore provides some guidance on specification of unwanted reflections.
NOTE ISO 9241 contains normative requirements related to unwanted reflections. It is possible that the information contained in this Technical Report will be used for a future update of ISO 9241.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.180
Ergonomics
;
35.180
IT terminal and other peripheral equipment
|
| ISO 20282-1:2006 |
Ease of operation of everyday products — Part 1: Design requirements for context of use and user characteristics |
ISO 20282-1:2006 provides requirements and recommendations for the design of easy-to-operate everyday products, where ease of operation addresses a subset of the concept of usability concerned with the user interface by taking account of the relevant user characteristics and the context of use.
ISO 20282-1:2006 is intended to be used in the development of everyday products, for which it defines ease of operation, explains which aspects of the context of use are relevant, and describes the characteristics of the intended user population that may influence usability.
The intended users of this part of ISO 20282-1:2006 are usability specialists, ergonomists, product designers, interaction designers, product manufacturers and others involved in the design and development of everyday products.
ISO 20282-1:2006 is applicable to mechanical and/or electrical products with an interface that a user can operate directly or remotely to gain access to the functions provided. These products fall into at least one of the following categories: consumer products intended for some or all of the general public which are bought, rented or used, and which may be owned by individuals, public organizations, or private companies; consumer products intended to be acquired and used by an individual for personal rather than professional use (e.g. alarm clocks, electric kettles, telephones, electric drills); walk-up-and-use products that provide a service to the general public (such as ticket-vending machines, photocopying machines, fitness equipment); products used in a work environment, but not as part of professional activities (e.g. a coffee machine in an office); products including software that supports the main goals of use of the product (e.g. a CD player).
This part of ISO 20282 is not applicable to the following: purely physical products without an interactive user interface (such as a jug or a hammer); products where appearance or fashion is the main goal (such as a watch with no markings); products requiring specialist training, specific skills and/or professional knowledge (such as a musical instrument or a car); standalone software products; products intended to be used for professional activities only.
|
Published |
2006-10 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
13.180
Ergonomics
|
| ISO 7746:1998 |
Banking — Telex formats for inter-bank messages |
|
Withdrawn |
1998-03 |
Edition : 2 |
Number of pages : 66 |
Technical Committee |
03.060
Finances. Banking. Monetary systems. Insurance
|
| ISO/TS 20282-2:2006 |
Ease of operation of everyday products — Part 2: Test method for walk-up-and-use products |
ISO 20282-2:2006 specifies a test method for measuring the ease of operation of "walk-up-and-use" products. The purpose of the test is to provide a basis for predicting the ease of operation of a walk-up-and-use product, including measures of its effectiveness and efficiency of operation, and the satisfaction of the intended user population in its expected context of use.
The intended users of ISO 20282-2:2006 are people with human factors expertise in the design and management of appropriate tests, including manufacturers, suppliers, purchasing organizations or third parties (such as consumer organizations).
|
Withdrawn |
2006-10 |
Edition : 1 |
Number of pages : 32 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TS 20282-2:2013 |
Usability of consumer products and products for public use — Part 2: Summative test method |
ISO/TS 20282:2013 specifies a user-based summative test method for the measurement of the usability and/or accessibility of consumer products and products for public use (including walk-up-and-use products) for one or more specific user groups. This test method treats accessibility as a special case of usability where the users taking part in the test represent the extremes of the range of characteristics and capabilities within the general user population. When the test method refers to usability, the method can also be used to test accessibility (unless otherwise specified).
|
Published |
2013-08 |
Edition : 2 |
Number of pages : 50 |
Technical Committee |
13.180
Ergonomics
|
| ISO/PAS 20282-3:2007 |
Ease of operation of everyday products — Part 3: Test method for consumer products |
ISO/PAS 20282-3:2007 specifies a test method for measuring the ease of operation of consumer products. The purpose of the test is to provide a basis for predicting the ease of operation of a consumer product, including measures of its effectiveness and efficiency of operation, and the satisfaction of the intended user population in the intended context of its use.
The intended users of ISO/PAS 20282-3:2007 are people with human factors expertise in the design and management of appropriate tests, including manufacturers, suppliers, purchasing organizations and third parties such as consumer organizations.
|
Withdrawn |
2007-12 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
13.180
Ergonomics
|
| ISO/PAS 20282-4:2007 |
Ease of operation of everyday products — Part 4: Test method for the installation of consumer products |
ISO/PAS 20282-4:2007 specifies a test method for measuring the ease of installation of consumer products. The purpose of the test is to provide a basis for predicting the ease of installation of a consumer product, including measures of its effectiveness and efficiency of installation, and the satisfaction of the intended user population in the intended context of its use. The method could also be applied to maintenance tasks.
The intended users of ISO/PAS 20282-4:2007 are people with human factors expertise in the design and management of appropriate tests, including manufacturers, suppliers, purchasing organizations and third parties such as consumer organizations.
|
Withdrawn |
2007-12 |
Edition : 1 |
Number of pages : 32 |
Technical Committee |
13.180
Ergonomics
|
| ISO/IEC TR 20322:2023 |
Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Biometrics and elderly people |
This document builds upon the information provided in ISO/IEC TR 24714-1, ISO/IEC TR 29194 and ISO/IEC 29138-1 in order to highlight in a more detailed way the medical, physical and cognitive aspects that are specific for the use of biometrics by elderly persons.
|
Published |
2023-03 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.180
Ergonomics
;
35.240.15
Identification cards. Chip cards. Biometrics
|
| ISO/TS 20646-1:2004 |
Ergonomic procedures for the improvement of local muscular workloads — Part 1: Guidelines for reducing local muscular workloads |
ISO/TS 20646-1:2004 provides information and guidelines to properly utilise various ergonomics standards concerning the factors related to local muscular workload (LMWL), and helps develop activities to reduce LMWL in workplaces, in an effective and efficient manner. ISO/TS 20646-1:2004 is intended primarily for employers, ergonomics and occupational health-related staff in enterprises, and workers. Specific measures to reduce LMWL can be applied to non-professional activities. Although ISO/TS 20646-1:2004 provides ideas of effective and efficient measures to reduce LMWL, it does not certify the complete prevention of health problems caused by LMWL.
|
Withdrawn |
2004-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.180
Ergonomics
|
| ISO/TS 20646:2014 |
Ergonomics guidelines for the optimization of musculoskeletal workload |
ISO/TS 20646:2014 provides information and guidelines to properly utilize various ergonomics standards concerning the factors related to musculoskeletal workload (MSWL), and helps develop activities to reduce or optimize MSWL in workplaces and non-professional activities, in an effective and efficient manner. The activities are intended to be based on a risk assessment. ISO/TS 20646:2014 is intended primarily for employers, ergonomics and occupational health-related staff and workers in enterprises, and workers. Prevention of MSWL is not always a matter of reducing the load. The approach to reducing MSWL also involves assessing the work environment and organization as a system to identify how changes can help to safely manage MSWL. Although it provides ideas of effective and efficient measures to reduce or optimize MSWL, ISO/TS 20646:2014 does not certify the complete prevention of health problems caused by MSWL.
|
Published |
2014-02 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
13.180
Ergonomics
|
| ISO 7746:1998/Cor 1:1999 |
Banking — Telex formats for inter-bank messages — Technical Corrigendum 1: . |
|
Withdrawn |
1999-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
03.060
Finances. Banking. Monetary systems. Insurance
|
| ISO 20685-1:2018 |
3-D scanning methodologies for internationally compatible anthropometric databases — Part 1: Evaluation protocol for body dimensions extracted from 3-D body scans |
This document addresses protocols for the use of 3-D surface-scanning systems in the acquisition of human body shape data and measurements defined in ISO 7250-1 that can be extracted from 3-D scans.
While mainly concerned with whole-body scanners, it is also applicable to body-segment scanners (head scanners, hand scanners, foot scanners).
It does not apply to instruments that measure the location and/or motion of individual landmarks.
The intended audience is those who use 3-D scanners to create 1-D anthropometric databases and the users of 1-D anthropometric data from 3-D scanners. Although not necessarily aimed at the designers and manufacturers of those systems, scanner designers and manufacturers can find it useful in meeting the needs of clients who build and use 1‑D anthropometric databases.
|
Published |
2018-10 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
13.180
Ergonomics
|
| ISO 20685-2:2015 |
Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions |
ISO 20685-2:2015 addresses protocols for testing of 3-D surface-scanning systems in the acquisition of human body shape data and measurements. It does not apply to instruments that measure the motion of individual landmarks.
While mainly concerned with whole-body scanners, it is also applicable to body-segment scanners (head scanners, hand scanners, foot scanners). This International Standard applies to body scanners that measure the human body in a single view. When a hand-held scanner is evaluated, it has to be noted that the human operator can contribute to the overall error. When systems are evaluated in which the subject is rotated, movement artefacts can be introduced; these can also contribute to the overall error. This part of ISO 20685 applies to the landmark positions determined by an anthropometrist. It does not apply to landmark positions automatically calculated by software from the point cloud.
The quality of surface shape of the human body and landmark positions is influenced by performance of scanner systems and humans including measurers and subjects. This part of ISO 20685 addresses the performance of scanner systems by using artefacts rather than human subjects as test objects.
Traditional instruments are required to be accurate to millimetre. Their accuracy can be verified by comparing the instrument with a scale calibrated according to an international standard of length. To verify or specify the accuracy of body scanners, a calibrated test object with known form and size is used.
The intended audience is those who use 3-D body scanners to create 3-D anthropometric databases including 3-D landmark locations, the users of these data, and scanner designers and manufacturers. This part of ISO 20685 intends to provide the basis for the agreement on the performance of body scanners between scanner users and scanner providers as well as between 3-D anthropometric database providers and data users.
|
Published |
2015-08 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
13.180
Ergonomics
|