| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/IEC TR 23187:2020 |
Information technology — Cloud computing — Interacting with cloud service partners (CSNs) |
This document provides an overview of and guidance on interactions between cloud service partners (CSNs), specifically cloud service brokers, cloud service developers and cloud auditors, and other cloud service roles. In addition, this document describes how cloud service agreements (CSAs) and cloud service level agreements (cloud SLAs) can be used to address those interactions, including the following:
— definition of terms and concepts, and provision of an overview for interactions between CSNs and CSCs and CSPs;
— description of types of CSN interactions;
— description of interactions between CSNs and CSCs;
— description of interactions between CSNs and CSPs;
— description of elements of CSAs and Cloud SLAs for CSN interactions, both with CSPs and with CSCs.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
35.210
Cloud computing
|
| ISO/IEC TR 23188:2020 |
Information technology — Cloud computing — Edge computing landscape |
This document examines the concept of edge computing, its relationship to cloud computing and IoT, and the technologies that are key to the implementation of edge computing. This document explores the following topics with respect to edge computing:
— concept of edge computing systems;
— architectural foundation of edge computing;
— edge computing terminology;
— software classifications in edge computing, e.g. firmware, services, applications;
— supporting technologies, e.g. containers, serverless computing, microservices;
— networking for edge systems, including virtual networks;
— data, e.g. data flow, data storage, data processing;
— management, of software, of data and of networks, resources, quality of service;
— virtual placement of software and data, and metadata;
— security and privacy;
— real time;
— mobile edge computing, mobile devices.
|
Published |
2020-02 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
35.210
Cloud computing
|
| ISO/IEC TR 23613:2020 |
Information technology — Cloud computing — Cloud service metering elements and billing modes |
This document describes a sample set of cloud service metering elements and billing modes.
|
Published |
2020-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
35.210
Cloud computing
|
| ISO/IEC 23751:2022 |
Information technology — Cloud computing and distributed platforms — Data sharing agreement (DSA) framework |
This document establishes a set of building blocks, i.e. concepts, terms, and definitions, including Data Level Objectives (DLOs) and Data Qualitative Objectives (DQOs), that can be used to create Data Sharing Agreements (DSAs). This document is applicable to DSAs where the data is intended to be processed using one or more cloud services or other distributed platforms.
|
Published |
2022-02 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
35.210
Cloud computing
|
| ISO/IEC TR 23951:2020 |
Information technology — Cloud computing — Guidance for using the cloud SLA metric model |
The scope of this document is to describe guidance for using the ISO/IEC 19086-2 metric model, illustrated with examples.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
35.210
Cloud computing
|
| ISO 1090:1981 |
Office machines and data processing equipment — Function key symbols on typewriters |
|
Withdrawn |
1981-01 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
35.260
Office machines
|
| ISO 2775:1977 |
Office machines and printing machines used for information processing — Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons |
Includes the principal widths to be retained for narrow one-time paper or plastic printing ribbons (19 mm width and less) intended for office machines and printing machines used for information processing. Also defines the location of the marking indicating the approach of the end of the ribbons for office machines. Reference: ISO 2257.
|
Published |
1977-02 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
35.260
Office machines
|
| ISO 3244:1974 |
Office machines and data processing equipment — Principles governing the positioning of control keys on keyboards |
|
Withdrawn |
1974-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
35.180
IT terminal and other peripheral equipment
;
35.260
Office machines
|
| ISO 3244:1984 |
Office machines and data processing equipment — Principles governing the positioning of control keys on keyboards |
|
Withdrawn |
1984-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
35.180
IT terminal and other peripheral equipment
;
35.260
Office machines
|
| ISO 3540:1976 |
Paper or plastic printing ribbons — Characteristics of cores |
Provides the most important characteristics of cores which are used to carry paper or plastic open spools printing ribbons of a nominal width of 8 mm intended for office machines and printing machines in information processing.
|
Published |
1976-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
35.260
Office machines
|
| ISO 3791:1976 |
Office machines and data processing equipment — Keyboard layouts for numeric applications |
Includes the basic arrangement of figures and symboles on keyboards intended for applications in which the data is mostly numeric. Reference: ISO 1092.
|
Published |
1976-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
35.180
IT terminal and other peripheral equipment
;
35.260
Office machines
|
| ISO 3866:1977 |
Office machines and printing machines used for information processing — Widths of fabric printing ribbons on spools exceeding 19 mm |
Includes the principal widths to be retained for fabric printing ribbons wider than 19 mm on spolls intended for office machines and machines used for information processing. Complements ISO 2257.
|
Published |
1977-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
35.260
Office machines
|
| ISO 3883:1977 |
Office machines — Line and character capacity of address masters |
Identifies the minimum line and character capacity of address masters as a first attempt to work towards the rationalization of the existing capacity of address masters.
|
Published |
1977-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
35.260
Office machines
|
| ISO 4062:1977 |
Dictation equipment — Symbols |
Includes symbols to be displayed on dictation equipment where they are used for the marking of controls and certain other parts of the devides.
|
Withdrawn |
1977-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
35.260
Office machines
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 4169:1979 |
Office machines — Keyboards — Key numbering system and layout charts |
|
Withdrawn |
1979-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
35.180
IT terminal and other peripheral equipment
;
35.260
Office machines
|
| ISO 4232-3:1984 |
Office machines — Minimum information to be included in specification sheets — Part 3: Postal franking machines |
Contains the minimum information to be included in the specification sheets of postal franking machines so that users may compare directly the characteristics of different machines.
|
Withdrawn |
1984-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
35.260
Office machines
|
| ISO 4882:1979 |
Office machines and data processing equipment — Line spacings and character spacings |
Includes preferred line spacings and character spacings for office machines and data processing equipment. Is intended to provide compatibility between forms and the machines used for their completion regarding line spacings and character spacings by giving guidance to machine manufacturers and forms designers on the preferred spacings to be used.
|
Published |
1979-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
35.180
IT terminal and other peripheral equipment
;
35.260
Office machines
|
| ISO 5138-1:1978 |
Office machines — Vocabulary — Part 1: Dictation equipment |
Included bilingual vocabulary serves for facilitating international communication in the field of office machines. Establishes reference between entries. Covers vocabulary of dictation machines.
|
Withdrawn |
1978-12 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
35.260
Office machines
;
01.040.35
Information technology (Vocabularies)
|
| ISO 5138-9:1984 |
Office machines — Vocabulary — Part 9: Typewriters |
Is aimed at simplifying international communication in the field of office machines. Provides English and French terms and definitions of selected concepts and establishes connections between entries. Deals with their operating processes, types, functions and parts.
|
Withdrawn |
1984-08 |
Edition : 1 |
Number of pages : 32 |
Technical Committee |
35.260
Office machines
;
01.040.35
Information technology (Vocabularies)
|
| ISO/IEC 10779:2008 |
Information technology — Office equipment accessibility guidelines for elderly persons and persons with disabilities |
ISO/IEC 10779:2008 specifies accessibility guidelines to be considered when planning, developing and designing electrophotographic copying machines, page printers and multi-function devices. These guidelines are intended to improve accessibility required when primarily older persons, persons with disabilities and persons with temporary disabilities use office equipment.
|
Withdrawn |
2008-06 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
35.260
Office machines
;
11.180.99
Other standards related to aids for disabled and handicapped people
|
| ISO/IEC 10779:2020 |
Information technology — Office equipment — Accessibility guidelines for older persons and persons with disabilities |
This document specifies accessibility guidelines to be considered when planning, developing and designing electrophotographic copying machines, page printers and multi-function devices. These guidelines are intended to improve accessibility required when primarily older persons, persons with disabilities and persons with temporary disabilities (hereafter referred to as older persons and persons with disabilities) use office equipment.
|
Published |
2020-05 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
35.260
Office machines
;
11.180.99
Other standards related to aids for disabled and handicapped people
|
| ISO/IEC 21118:2005 |
Information to be included in specification sheets — Data projectors |
ISO/IEC 21118:2005 is applicable for information to be included in specification sheets about front projection type, fixed resolution and light valve system, and data projectors having a computer signal input port capable of projecting the image outputs from a computer, VCR or other devices.
|
Withdrawn |
2005-08 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
35.260
Office machines
|
| ISO/IEC 21118:2012 |
Information technology — Office equipment — Information to be included in specification sheets — Data projectors |
ISO/IEC 21118:2012 specifies the information to be included in the specification sheets for front projection type data projectors and the form of specification sheets. It is also applicable to data projectors that have a video signal input port as well as a computer signal input port.
It is not applicable to units for a rear screen projection or with a video input terminal alone.
|
Withdrawn |
2012-12 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
35.260
Office machines
|
| ISO/IEC 21118:2020 |
Information technology — Office equipment — Information to be included in specification sheets for data projectors |
This document specifies the information to be included in the specification sheets for front projection type data projectors and the form of specification sheets.
This document is not applicable to units for a rear screen projection.
|
Published |
2020-02 |
Edition : 3 |
Number of pages : 23 |
Technical Committee |
35.260
Office machines
|
| ISO/IEC TR 22981:2020 |
Information technology — Office equipment — Guidelines for the development of an ontology (vocabulary, components and relationships) for office equipment |
This document provides background information and guidelines for the development of an ontology for office equipment.
An example of how such a standard can be used to automate the identification of resources for colour is provided.
NOTE Often the terms vocabulary and ontology are used with the same meaning.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
35.260
Office machines
|
| ISO/IEC 24700:2005 |
Quality and performance of office equipment that contains reused components |
ISO/IEC 24700:2004 specifies product characteristics for use in an original equipment manufacturer's or authorized third party's declaration of conformity to demonstrate that a marketed product that contains reused components performs equivalent to new, meeting equivalent to new component specifications and performance criteria, and continues to meet all the safety and environmental criteria required by responsibly built products. It is relevant to marketed products whose manufacturing and recovery processes result in the reuse of components. Annex C has a description of how reuse relates to other recycling processes. ISO/IEC 24700:2004 is applicable to:
A situation in which a government requires a neutral benchmark to evaluate the quality, safety and performance of equipment that contains reused components and to demonstrate the environmental responsibility of the supplier. When regulations mandate a neutral benchmark for equipment, ISO/IEC 24700:2004 provides the benchmark for proving compliance with such regulations.A situation in which a commercial supplier requires a neutral benchmark to demonstrate and communicate the quality, safety and performance of equipment that contains reused components and to demonstrate the environmental responsibility of the supplier.Situations in which consumers require a neutral benchmark to identify or distinguish environmentally responsible products.
ISO/IEC 24700:2004 reflects the world's current approaches that yield products from many manufacturing processes including the reuse of components, with the equipment's warranties and guarantees playing an important role in market acceptance. In today's procurement processes, technical equipment definitions used by regulators must be addressed and, in that sense, ISO/IEC 24700:2004 will be useful in procurement and in the trade facilitation area, to communicate with regulators. ISO/IEC 24700:2004 specifically addresses office equipment. However, in the future it may provide valuable directions for other industries and industrial sectors.
|
Published |
2005-07 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
35.260
Office machines
|
| ISO/IEC DIS 7184 |
Office equipment — Security requirements for hard copy devices (HCD) — Part 1: Definition of the basic requirements |
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
33.050.30
Equipment for telex, teletext, telefax
;
37.100.10
Reproduction equipment
|
| ISO 2133:1976 |
Stencils for duplicators — Minimum overprint and attachment features |
Defines the dimensions of the working area of dublicating stencils intended for use with paper of sizes up to and including A4 (210 mm x 297 mm). Lays down: the minimum information printed on the face of the stencil and the prefered information relating to markings for the A series of paper sizes; the attachment features of stencils according to those specified in ISO 2132.
|
Withdrawn |
1976-08 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 3066:1974 |
Duplicating machines — Registration |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 3066:1986 |
Duplicating machines — Registration |
Includes test methods by which the registration obtained of offset litho, stencil, and spirit (or other fluid) duplicationg machines can be determined. Tables of limits are given by which the registration can be classified.
|
Withdrawn |
1986-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 3872:1976 |
Graphic technology — Sheet-fed printing machines — Range of sizes |
|
Withdrawn |
1976-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 4218-1:1979 |
Printing machines — Vocabulary — Part 1: Fundamental terms |
|
Withdrawn |
1979-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
01.040.37
Image technology (Vocabularies)
;
37.100.10
Reproduction equipment
|
| ISO 4232-1:1979 |
Duplicators — Minimum information to be included in specification sheets |
Prescribes the minimum information to be included in the specification sheets of duplicators so that users may compare directly the characteristics of different machines.
|
Withdrawn |
1979-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 4232-2:1980 |
Office machines — Minimum information to be included in specifications sheets — Part 2: Document copying machines |
Determines the minimum information to be included in the specification sheets of document copying machines for the users to compare directly the characteristics of different machines.
|
Withdrawn |
1980-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 5138-2:1980 |
Office machines — Vocabulary — Part 2: Duplicators |
Included bilingual vocabulary is intended to facilitate international communication in the field of office machines. Establishes references between entries. Covers vocabulary of dublicators.
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
01.040.37
Image technology (Vocabularies)
;
37.100.10
Reproduction equipment
|
| ISO/IEC 6329:1989 |
Duplicators and document copying machines — Symbols |
Provides the symbols which shall be used for the marking of controls, indicator panels and certain other parts of duplicators and document copying machines for assisting users in operating and maintaining the machines.
|
Withdrawn |
1989-06 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
37.100.10
Reproduction equipment
|
| ISO/IEC DIS 7184 |
Office equipment — Security requirements for hard copy devices (HCD) — Part 1: Definition of the basic requirements |
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
33.050.30
Equipment for telex, teletext, telefax
;
37.100.10
Reproduction equipment
|
| ISO 9336-2:1994 |
Optics and optical instruments — Optical transfer function — Application — Part 2: Lenses for office copiers |
Specifies a method of testing lenses for office copiers in terms of imaging states aimed at making valid optical transfer function measurements.
|
Withdrawn |
1994-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
;
37.100.10
Reproduction equipment
|
| ISO/TS 10128:2009 |
Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data |
ISO/TS 10128:2009 specifies three methods for the adjustment of the digital content data that is input to a printing system to achieve consistency in the printed results among a number of presses printing to the same general aim conditions. These three methods are generally identified as
the matching of tone value curves,
the use of near-neutral scales, and
the use of CMYK to CMYK multi-dimensional transforms.
The procedures for establishing the aim condition for the necessary transfer curves, the procedures for determining the individual transfer curves, and a comparison of the applicability of these three methods are included.
These adjustment procedures are applicable to printing systems that use CMYK colourants but are not restricted to those that use traditional ink on paper printing but can involve other marking technologies such as those used for proofing and/or digital printing.
|
Published |
2009-07 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/DTS 10128 |
Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data |
ISO/TS 10128:2009 specifies three methods for the adjustment of the digital content data that is input to a printing system to achieve consistency in the printed results among a number of presses printing to the same general aim conditions. These three methods are generally identified as
the matching of tone value curves,
the use of near-neutral scales, and
the use of CMYK to CMYK multi-dimensional transforms.
The procedures for establishing the aim condition for the necessary transfer curves, the procedures for determining the individual transfer curves, and a comparison of the applicability of these three methods are included.
These adjustment procedures are applicable to printing systems that use CMYK colourants but are not restricted to those that use traditional ink on paper printing but can involve other marking technologies such as those used for proofing and/or digital printing.
|
Under development |
|
Edition : 2 |
|
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 11159:1992 |
Information technology — Office equipment — Minimum information to be included in specification sheets — Copying machines |
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 11159:1996 |
Information technology — Office equipment — Minimum information to be included in specification sheets — Copying machines |
Specifies the minimum information that shall be included in the specification sheets of copying machines and defines tests to verify these specifications. Is intended to facilitate the users in selecting a copying machine.
|
Withdrawn |
1996-08 |
Edition : 2 |
Number of pages : 27 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12635:1996 |
Graphic technology — Plates for offset printing — Dimensions |
|
Withdrawn |
1996-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12635:2008 |
Graphic technology — Plates for offset printing — Dimensions |
ISO 12635:2008 specifies the width, length and thickness of metal lithographic printing plates (referred to in the document as “plates”). For plates to be used in computer to plate (CtP) applications, flatness, edge straightness and burr requirements are also included. These requirements are applicable to unprocessed plates.
|
Withdrawn |
2008-12 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12635:2021 |
Graphic technology — Plates for offset printing — Dimensions |
This document specifies the width, length and thickness of metal lithographic printing plates (referred to hereafter as “plates”). For plates to be used in computer to plate (CtP) applications, flatness, edge straightness and burr requirements are also included. These requirements are applicable to unprocessed plates.
|
Published |
2021-06 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12636:1998 |
Graphic technology — Blankets for offset printing |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12636:2018 |
Graphic technology — Blankets for offset printing |
ISO 12636:2017 defines vocabulary and specifies test methods, characteristics, ordering and labelling information for blankets for offset printing. This document does not apply to un-tensioned or unclamped blankets for offset printing, nor offset printing sleeves used on gapless presses.
|
Published |
2018-01 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12643-1:2007 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
ISO 12643-1:2007 provides safety specifications for the design and construction of new machines used in printing press systems and in binding and finishing systems. It includes equipment used in a stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system.
The requirements listed in ISO 12643-1:2007 are applicable to the equipment covered by all parts of ISO 12643, unless otherwise noted. Requirements specific to press and binding and finishing equipment and systems, that are not included in ISO 12643-1:2007, are given in ISO 12643-2 and ISO 12643-3, respectively.
ISO 12643-1:2007 addresses recognized hazards specific to equipment and systems in the following areas:
mechanical;electrical;slipping, tripping, falling;ergonomics;noise;radiation;fire and explosion;thermal;other emissions.
It is advisable that technologies not identified in ISO 12643-1:2007 incorporate the safety principles set forth herein in their design.
|
Withdrawn |
2007-03 |
Edition : 1 |
Number of pages : 77 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12643-5:2010 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses |
ISO 12643-5:2010 provides safety requirements specific to stand-alone platen presses. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.
ISO 12643-5:2010 provides additional press design safety requirements for the design and construction of new manually fed or automatic stand-alone platen press systems intended for diecutting, creasing, embossing, foil stamping and/or the printing of paper, board and other materials processed in a similar manner.
ISO 12643-5:2010 is not applicable to presses designed to handle metal material other than foil.
|
Published |
2010-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12643-1:2009 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
ISO 12643-1:2009 provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems and stand‑alone platen presses. It is applicable to equipment used in a stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system.
The requirements given in ISO 12643-1:2009 are applicable to the equipment covered by all parts of ISO 12643, unless otherwise noted. ISO 12643-1:2009 is intended to be used in conjunction with the applicable part of ISO 12643 that contains additional requirements specific to a particular type of equipment.
ISO 12643-1:2009 addresses recognized significant hazards specific to equipment and systems in the following areas:
mechanical;
electrical;
slipping, tripping, falling;
ergonomics;
noise;
UV and laser radiation;
fire and explosion;
thermal;
other types of emissions [e.g. ozone, ink mist, volatile organic compounds (VOCs), etc.].
The safety principles established in ISO 12643-1:2009 can also be applicable to the design of equipment within areas of technology that are not specified in ISO 12643.
|
Published |
2009-12 |
Edition : 2 |
Number of pages : 81 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/FDIS 12643-1.2 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12643-2:2007 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Press equipment and systems |
ISO 12643-2:2007 provides requirements specific to press equipment and systems. It is used in conjunction with the general requirements given in ISO 12643-1.
ISO 12643-2:2007 provides additional safety requirements for the design and construction of new press equipment and the auxiliary equipment integrated into the press control system.
|
Withdrawn |
2007-04 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12643-2:2010 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems |
ISO 12643-2:2010 provides requirements specific to prepress and press equipment and systems. It is intended to be used in conjunction with the general requirements of ISO 12643-1.
ISO 12643-2:2010 provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.
|
Published |
2010-12 |
Edition : 2 |
Number of pages : 49 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/FDIS 12643-2.2 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12643-3:2008 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
ISO 12643-3:2008 provides requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.
ISO 12643-3:2008 provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process.
It is applicable to a wide range of equipment used in the binding and finishing process.
|
Withdrawn |
2008-03 |
Edition : 1 |
Number of pages : 52 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12643-3:2010 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
ISO 12643-3:2010 provides safety requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.
ISO 12643-3:2010 provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process.
It is applicable to a wide range of equipment used in the binding and finishing process.
|
Published |
2010-12 |
Edition : 2 |
Number of pages : 56 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/FDIS 12643-3 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12643-4:2010 |
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems |
ISO 12643-4:2010 provides safety requirements for the design and construction of converting equipment used in the package printing, converting and graphic technology industries. It is applicable to converting equipment, not covered by other parts of ISO 12643. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.
|
Published |
2010-03 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12648:2003 |
Graphic technology — Safety requirements for printing press systems |
ISO 12648:2002 applies to printing press systems, including auxiliary equipment and finishing machines, in which all the machine actuators (e.g. drives) of the equipment in the system are controlled by the same control system.
It is applicable only to systems in which a printing press is part of the system. In cases where a binding/finishing system is not integrated with a printing press, ISO 12649 will apply.
ISO 12648:2002 provides safety requirements for the design and construction of the classes of machines listed in Clause 2. It addresses recognized hazards specific to printing press systems in the following areas:
mechanical;electrical;slipping, tripping, falling;ergonomics;noise;radiation;fire and explosion;thermal;emissions.
ISO 12648:2002 applies to new machines (see Clause 2) manufactured after December 31 of the year following the year of publication of this standard.
|
Withdrawn |
2003-04 |
Edition : 1 |
Number of pages : 91 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 12648:2006 |
Graphic technology — Safety requirements for printing press systems |
ISO 12648:2006 provides safety requirements for the design and construction of machines used in printing press systems, including auxiliary equipment and finishing machines, in which all the machine actuators (e.g. drives) of the equipment in the system are controlled by the same control system.
It is applicable only to systems in which a printing press is part of the system.
It addresses recognized hazards specific to printing press systems in the following areas:
mechanical;electrical;slipping, tripping, falling;ergonomics;noise;radiation;fire and explosion;thermal;emissions.
Equipment covered by ISO 12648:2006 may be used in a stand-alone configuration, or in combination with other machines affected by an integrated control system.
This International Standard applies to machines manufactured one year or more after the date of its publication.
|
Withdrawn |
2006-01 |
Edition : 2 |
Number of pages : 107 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 13660:2001 |
Information technology — Office equipment — Measurement of image quality attributes for hardcopy output — Binary monochrome text and graphic images |
|
Withdrawn |
2001-09 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
35.180
IT terminal and other peripheral equipment
;
37.100.10
Reproduction equipment
|
| ISO/TR 13928:1994 |
Application guide for ISO 10755, ISO 10756, ISO 10757, ISO 10758 and ISO 10759 |
Intended to assist users to understand the application of these standards. Gives particular notes to the individual standards and describes certain assumptions made during the development of these specifications.
|
Withdrawn |
1994-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 14545:1998 |
Information technology — Office equipment — Method for measuring copying machine productivity |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 15341:2014 |
Graphic technology — Method for radius determination of printing cylinders |
ISO 15341:2014 defines a method for measuring the external radius of printing cylinders, specifies critical parameters and operational instructions and provides recommendations for instrument design.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 15775:1999 |
Information technology — Office machines — Method of specifying image reproduction of colour copying machines by analog test charts — Realisation and application |
This International Standard applies to implementation and application of test charts for colour copying machines.
This International Standard serves for testing of reproduction properties of colour copying machines, in order to help
to recognize the possibilities and limits of various machines and for their comparison.
To use this International Standard, make copies of at least two test charts (one achromatic and one chromatic) out of
eight test charts using the device to be tested. The resulting copies shall be examined visually and may be
compared with the original test charts. Objective measurements may be made for these copies.
Eight ISO-test charts, four in halftone (offset reproduction) and four in continuous tone (photographic reproduction),
belonging to this International Standard may be produced by different manufacturers. Information about where to
obtain test chart layout and colorimetric L*a*b* data to produce the charts may be found in Annex M.
All hard copy patterns (analog test charts) produced according to this International Standard should be discarded
after three years.
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 50 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 15775:1999/Amd 1:2005 |
Information technology — Office machines — Method of specifying image reproduction of colour copying machines by analog test charts — Realisation and application — Amendment 1 |
|
Withdrawn |
2005-03 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 15775:2022 |
Information technology — Office equipment — Method of specifying image reproduction of colour copying machines and multifunction devices with copying modes by printed test charts |
|
Published |
2022-12 |
Edition : 2 |
Number of pages : 65 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 8038:2011 |
Microscopes — Screw threads for objectives and related nosepieces |
ISO 8038:2011 specifies the dimensions of screw thread types for connecting a microscope objective to the nosepiece.
|
Withdrawn |
2011-04 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO/IEC 16680:2012 |
Information technology — The Open Group Service Integration Maturity Model (OSIMM) |
ISO/IEC 16680:2012 is The Open Group Service Integration Maturity Model (OSIMM).
It specifies
a model against which the degree of service integration maturity of an organization can be assessed, and
a process for assessing the current and desired degree of service integration maturity of an organization, using the model.
|
Published |
2012-05 |
Edition : 1 |
Number of pages : 71 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 17629:2014 |
Information technology — Office equipment — Method for measuring first print out time for digital printing devices |
ISO/IEC 17629:2014 specifies a method for measuring first print out time of digital printing devices. It is applicable to digital printing devices and multifunctional devices. It is intended to be used for black and white (B&W) as well as colour digital printing devices and multifunctional devices of any underlying marking technology. It includes instructions for test charts, test setup procedure, test procedure, and the reporting requirements for the digital printing measurements.
|
Published |
2014-06 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 17823:2015 |
Information technology — Office equipment — Colour terminology for office colour equipment |
ISO/IEC 17823:2015 provides definitions for colour terms used with office equipment, in particular for use with colour scanning and printing devices that have digital imaging capabilities, including multi-function devices.
ISO/IEC 17823:2015 is not intended to replace terms and definitions published in documents or user interfaces issued or created by manufacturers.
|
Published |
2015-09 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC DIS 17823 |
Information technology — Office equipment — Colour terminology for office colour equipment |
ISO/IEC 17823:2015 provides definitions for colour terms used with office equipment, in particular for use with colour scanning and printing devices that have digital imaging capabilities, including multi-function devices.
ISO/IEC 17823:2015 is not intended to replace terms and definitions published in documents or user interfaces issued or created by manufacturers.
|
Under development |
|
Edition : 2 |
Number of pages : 21 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 17991:2015 |
Information technology — Office equipment — Method for Measuring Scanning Productivity of Digital Multifunctional Devices |
ISO/IEC 17091:2015 specifies a method for determining scanning productivity by measuring "scanning speed" and "scan to network folder speed". It includes test files, test setup procedure, test procedure, and the reporting requirements for the scanning productivity measurements. This International Standard is applicable to black and white (B&W) as well as colour digital multifunctional devices of any underlying marking technology.
ISO/IEC 17091:2015 is applicable to devices which are able to scan a media size of A4/8,5" × 11", and which have an automatic document feeder (ADF), an ability to scan to network folder, and do not need other application programs on a computer or another devices to do a scanning job.
ISO/IEC 17091:2015 is not intended to be use for image quality measurement, document or record management of any scanned images.
|
Withdrawn |
2015-03 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 17991:2021 |
Information technology — Office equipment — Method for measuring scanning productivity of digital scanning devices |
This document specifies a method for determining scanning productivity by measuring "scanning speed", "scan to network folder speed" and "scan to PC speed". It includes test files, test setup procedure, test procedure and the reporting requirements for the scanning productivity measurements. This document is applicable to scanning devices including but not limited to multi-function devices, networked scanners and single-function scanners of any underlying scanning technology.
This document is applicable to devices which are able to scan a media size of A4/8,5" × 11" and which have an automatic document feeder (ADF). It is also applicable to devices which have the ability to scan to network folder, or folder on PC and do not require, but can use, other application programs on a computer or another device to perform a scanning job.
This document does not apply to testing and measurement of scan to USB, scan to local hard drive or other storage medium that is part of or plugged into the scanner.
This document is not intended to be used for image quality measurement, document or record management of any scanned images.
|
Published |
2021-01 |
Edition : 2 |
Number of pages : 32 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/TS 18621-11:2019 |
Image quality evaluation methods for printed matter — Part 11: Colour gamut analysis |
This document defines procedures to measure and compare the colour gamuts of RGB and CMYK printing processes.
It is not applicable to other printing processes.
|
Withdrawn |
2019-12 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/TS 18621-11:2022 |
Graphic technology — Image quality evaluation methods for printed matter — Part 11: Colour gamut analysis |
This document defines procedures to measure and compare the colour gamuts of RGB and CMYK printing processes.
It is not applicable to other printing processes.
|
Published |
2022-04 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 8038:2013 |
Microscopes — Screw threads for objectives and related nosepieces |
ISO 8038:2013 specifies the dimensions of screw thread types for connecting a microscope objective to the nosepiece.
|
Withdrawn |
2013-11 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO/TS 18621-21:2020 |
Graphic technology — Image quality evaluation methods for printed matter — Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers |
This document defines a measurement method for the evaluation of distortions in the macroscopic uniformity of printed areas that are oriented in the horizontal and vertical direction, such as streaks and bands.
It provides requirements for the layout of the test form, the use of a colour measurement device taking measurements in a 2D sampling grid, and the formula to compute the Macro-Uniformity-Score.
This document does not cover any non-adjacent or non-horizontal nor vertical patterns. Due to the used spatial frequency, the Macro-Uniformity-Score does not measure high frequency (fine) patterns such as missing nozzles.
|
Withdrawn |
2020-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/TS 18621-21:2023 |
Graphic technology — Image quality evaluation methods for printed matter — Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers |
This document defines a measurement method for the evaluation of distortions in the macroscopic uniformity of printed areas that are oriented in the horizontal and vertical direction, such as streaks and bands.
It provides requirements for the layout of the test form, the use of a colour measurement device taking measurements in a 2D sampling grid, and the formula to compute the Macro-Uniformity-Score.
This document does not cover any non-adjacent or non-horizontal nor vertical patterns. Due to the used spatial frequency, the Macro-Uniformity-Score does not measure high frequency (fine) patterns such as missing nozzles.
|
Published |
2023-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/TS 18621-31:2020 |
Graphic technology — Image quality evaluation methods for printed matter — Part 31: Evaluation of the perceived resolution of printing systems with the Contrast–Resolution chart |
This document specifies the Contrast?Resolution test chart, the requirements on the printing process needed to reproduce this test chart, the required characteristics of a high resolution scanner needed to digitize the information reproduced on printed test charts, and the requirements on the interpretation of this digitized data. It also specifies the resolution-score method for evaluating the perceptual resolution of printed material using the Contrast?Resolution test chart.
The procedure specified in this document is intended for a characterization of the perceived resolution of a graphic arts production printing system using the Contrast?Resolution test chart.
|
Published |
2020-12 |
Edition : 1 |
Number of pages : 35 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 19594:2017 |
Graphic technology — Test method for the determination of the binding strength for perfect-bound products — Page-pull test working upwards |
ISO 19594:2017 specifies a test method for the determination of the binding strength of perfect-bound products by pulling out single sheets from the book block in an upward direction.
|
Published |
2017-02 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 19752:2004 |
Information technology — Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components |
ISO/IEC 19752:2004 is limited to evaluation of toner cartridge yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotographic printers. ISO/IEC 19752:2004 can also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components).
ISO/IEC 19752:2004 is only intended for the measurement of toner cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc.
|
Withdrawn |
2004-06 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 19752:2004/Cor 1:2012 |
Information technology — Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components — Technical Corrigendum 1 |
|
Withdrawn |
2012-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 19752:2017 |
Information technology — Office equipment — Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components |
ISO/IEC 19752:2017 is limited to the evaluation of toner cartridge page yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotographic print systems. This document could also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components).
ISO/IEC 19752:2017 is only intended for the measurement of toner cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc.
NOTE 1 Application of this document for yield measurement of toner replenishment systems (i.e. toner cartridge- and bottle-type systems where the toner reservoir is internal to the printing system and not user-replaceable) requires some procedural modifications specifically noted herein. This document is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this document.
NOTE 2 An all-in-one cartridge is a cartridge that includes at least a toner containment part, a photoreceptor part and a developer part (see ISO/IEC 29142-1).
|
Published |
2017-01 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC TR 19797:2004 |
Information technology — Office machines — Device output of 16 colour scales, output linearization method (LM) and specification of the reproduction properties |
ISO/IEC TR 19797:2004 measures output and by the linearization method (LM).There is a table of output values and a graph for the first and linearized output. This method produces a linear relationship between the linear digital input data and the output data on a visual relative CIELAB scale for the colour primaries. The visual uniformity of overprint scales can be improved by this method. The method is applicable for systems that do not have colour management or as a linearization method for devices that could be used as a setup_state for colour management.
|
Withdrawn |
2004-09 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 19798:2006 |
Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components |
The scope of ISO/IEC 19798:2006 is limited to evaluation of toner cartridge page yield for toner-containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for colour electrophotographic printers. It can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain electro-photographic printer components.
|
Withdrawn |
2006-12 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 19798:2007 |
Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components |
ISO/IEC 19798:2007 defines a method for testing and calculation of average yield measured in the number of standard pages for a colour toner cartridge and specific printer printing in a semi-continuous mode under a defined set of conditions. It uses the test page suite defined in ISO/IEC 24712. ISO/IEC 19798:2007 can also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components).
ISO/IEC 19798:2007 is only intended for the measurement of colour toner cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc.
|
Withdrawn |
2007-12 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 19798:2007/Cor 1:2012 |
Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components — Technical Corrigendum 1 |
|
Withdrawn |
2012-09 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 19798:2017 |
Information technology — Office equipment — Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components |
The scope of ISO/IEC 19798:2017 is limited to evaluation of toner cartridge page yield for toner-containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for colour electrophotographic print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain electrophotographic printer components.
ISO/IEC 19798:2017 is only intended for the measurement of toner cartridge page yield when printing on plain paper using cyan, magenta, yellow and black toner cartridges. No other claims can be made from this testing regarding quality, reliability, etc.
ISO/IEC 19798:2017 is not for use with printers whose minimum printable size is equal to or greater than A3 or for photo-only printers.
NOTE 1 Application of this document for yield measurement of toner replenishment systems (i.e. toner cartridge and bottle type systems where the toner reservoir is internal to the printing system and not user-replaceable) requires some procedural modifications specifically noted herein. This document is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this document.
NOTE 2 An all-in-one toner cartridge is a cartridge that includes at least: a toner containment part, a photoreceptor part and a developer part (see ISO/IEC 29142‑1).
|
Published |
2017-01 |
Edition : 3 |
Number of pages : 19 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 19799:2007 |
Information technology — Method of measuring gloss uniformity on printed pages |
ISO/IEC 19799:2007 defines methods and processes for measuring objective print quality attributes for the assessment of gloss non-uniformity on printed pages in reflection mode, and provides transforms, when applicable, that relate the objective results to subjective responses if appropriate. The gloss uniformity attributes included in ISO/IEC 19799:2007 are differential gloss, gloss uniformity within a page, and gloss consistency within a run.
ISO/IEC 19799:2007 provides
a definition of gloss uniformity attributes representative of the print quality on reflection prints,
a set of print files for the creation of printed pages for gloss uniformity measurement,
a procedure for gloss uniformity testing and the analysis of the resulting data,
a method for evaluating and grading these measurements and deriving an assessment of gloss uniformity,
the appropriate method of describing the gloss uniformity of printing and copying systems in documentation supplied to the consumer by the manufacturer.
The reflection prints that are to be used for measurement can be created via printers or copiers (analog and digital).
ISO/IEC 19799:2007 is applicable only to electro-photographic based prints. It does not address the measurement of gloss attributes of printed pages in transmission mode.
|
Published |
2007-03 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC CD 22592-3 |
Office equipment — Print quality measurement methods for colour prints — Part 3: Physical durability measurement methods |
This document specifies test methods as well as test charts to measure the physical durability attributes in duplex colour prints typically used in office environment. This document is applicable t This document specifies test methods as well as test charts to measure the physical durability attributes in duplex colour prints typically used in office environment. This document is applicable to duplex prints comprising several sheets which are printed colour images on both surfaces of a substrate. Included are digital prints formed by using a multifunction or single function printer.
This document is applicable to evaluate durability of colour prints under the environment and stress assuming general office use case including transportation from the place printed to practically used, so permanence and durability in archival and storage environments are out of scope of this document.
The physical durability attributes included are thermal and humidity blocking, water resistance, abrasion resistance, and scratch resistance.
Arranging measurement settings appropriately, all the attributes are also applicable for a simplex print set comprising several sheets which are printed colour images on one surface of a substrate and no image on the other surface. o duplex prints comprising several sheets which are printed colour images on both surfaces of a substrate. Included are digital prints formed by using a multifunction or single function printer.
The physical durability attributes included are thermal and humidity blocking, water resistance, abrasion resistance, and scratch resistance.
Arranging measurement settings appropriately, all the attributes are also applicable for a simplex print set comprising several sheets which are printed colour images on one surface of a substrate and no image on the other surface.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 20690:2018 |
Graphic technology — Determination of the operating power consumption of digital printing devices |
ISO 20690:2018 provides requirements and recommendations for measuring the electricity consumption of small-format and wide-format digital production presses printing in different modes of operation. It is intended for use on equipment that has been declared by the manufacturer to be suitable for use as a digital production printing press.
ISO 20690:2018 provides a means to compare the energy efficiency figures according to two or more characteristic machine combinations: Best Quality (BQ), Best Productivity (BP) or other combinations.
ISO 20690:2018 is not suitable for determining the power consumption of individual device components such as servos, fans, compressors, control boards and so on. It excludes digital presses designed to print textiles intended for clothing or machines, which similarly depend on additional processes to produce the printed product, such as ceramics.
|
Published |
2018-02 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 21117:2005 |
Information technology — Office equipment — Copying machines and Multi-function devices — Information to be included in specification sheets and related test methods |
ISO/IEC 21117:2005 specifies the information and the related test methods to be listed in specification sheets for digital copying machines and multi-function devices. In consideration of the progress in digital and network technology, it contains the specification of common extended functions of multi-function devices, i.e. scanner functions, printer functions, facsimile functions and Internet facsimile functions including e-mail transmission functions. It also includes the specifications of additional options, such as document feeder, auxiliary paper-supply devices, sorters and finishers.
|
Withdrawn |
2005-12 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 21117:2012 |
Information technology — Office equipment — Copying machines and multi-function devices — Information to be included in specification sheets and related test methods |
ISO/IEC 21117:2012 specifies the information to be listed in specification sheets for electrophotographic digital copying machines and multi-function devices.
|
Published |
2012-06 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 21632:2018 |
Graphic technology — Determination of the energy consumption of digital printing devices including transitional and related modes |
This document provides directions for measuring and calculating the electricity consumption of any format of digital production press, whose modes, other than production printing mode, play a significant role in the comprehensive energy consumption. It excludes digital presses designed to print substrates other than paper or plastic and conventional printing presses fitted with digital inkjet printing heads.
It can be used to compare the energy efficiency figures for different machine combinations: best-quality (slowest), highest-productivity (fastest) or other alternative combinations.
|
Published |
2018-12 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 21632:2018/Amd 1:2020 |
Graphic technology — Determination of the energy consumption of digital printing devices including transitional and related modes — Amendment 1 |
|
Published |
2020-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC 22505:2019 |
Information technology — Method for the determination of ink cartridge yield for monochrome inkjet printers and multi-function devices that contain inkjet printer components |
The scope of this document is limited to the evaluation of black ink cartridge page yield for ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated printheads) for monochrome inkjet print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain inkjet printer components. Both liquid and solid ink products can be tested using this document.
This document is only intended for the measurement of ink cartridge page yield when printing on plain paper. No other claims can be made from this testing regarding quality, reliability, etc.
This document can be used to measure the yield of any cartridge that is used in a significant amount during the printing of the test page defined in ISO/IEC 19752.
This document is not for use with printers whose minimum printable size is equal to or greater than A3 or for printers designed or configured to print photos (for example, maximum printable size less than A4 or a printer configuration intended for photo only printing). In addition, this document only applies to drop on demand printing systems.
NOTE Integrated ink cartridge is a cartridge that includes at least: an ink containment part, an ink deposition mechanism and an ink transport part (see ISO/IEC 29142-1).
|
Published |
2019-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC DIS 22592-1 |
Office equipment — Print quality measurement methods for colour prints — Part 1: Image quality measurement methods |
|
Under development |
|
Edition : 2 |
Number of pages : 22 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO/IEC DIS 22592-2 |
Office equipment — Print quality measurement methods for colour prints — Part 2: Registration and magnification accuracy |
|
Under development |
|
Edition : 1 |
Number of pages : 28 |
Technical Committee |
37.100.10
Reproduction equipment
|
| ISO 8039:1997 |
Optics and optical instruments — Microscopes — Magnification |
|
Withdrawn |
1997-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
|