| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 10131-1:1997 |
Foldaway beds — Safety requirements and tests — Part 1: Safety requirements |
|
Published |
1997-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.140
Furniture
|
| ISO 10131-2:1997 |
Foldaway beds — Safety requirements and tests — Part 2: Test methods |
|
Published |
1997-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.140
Furniture
|
| ISO/DIS 12808 |
Hardware for furniture — Strength and durability of extension elements and their components |
This document specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachement, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
Ageing and influences of heat and humidity are not included.
|
Under development |
|
Edition : 1 |
Number of pages : 17 |
Technical Committee |
97.140
Furniture
|
| ISO 16131:2012 |
Leather — Upholstery leather characteristics — Selection of leather for furniture |
ISO 16131:2012 specifies sampling and test methods, and gives recommended values for, upholstery leather for furniture.
|
Published |
2012-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.140
Furniture
;
59.140.99
Other standards related to leather technology
|
| ISO/CD 16502-1 |
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 1: Ignition source: smouldering cigarette |
This International Standard specifies a test method to assess the ignitability of mattresses, upholstered bed bases or mattress pads when subjected to a smouldering cigarette as an ignition source.
Air mattresses and water beds are excluded from this standard.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.140
Furniture
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/CD 16502-2 |
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 2: Ignition source: match flame equivalent |
This International Standard specifies a test method to assess the ignitability of mattresses, upholstered bed bases, when subjected to a gas flame as an ignition source.
Air mattresses and water beds are excluded from this standard.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.140
Furniture
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/FDIS 19682 |
Furniture — Tables — Test methods for the determination of stability, strength and durability |
|
Under development |
|
Edition : 1 |
Number of pages : 45 |
Technical Committee |
97.140
Furniture
|
| ISO 19833:2018 |
Furniture — Beds — Test methods for the determination of stability, strength and durability |
ISO 19833:2018 specifies test methods for determining the stability, strength and durability of all types of fully assembled beds including bed frames and bed bases.
ISO 19833:2018 applies to adult beds for domestic and non-domestic use. It does not apply to waterbeds, airbeds, foldaway beds, bunk beds and beds for people with special needs, nor to beds for healthcare and medical purposes.
Test methods for the assessment of ageing, degradation, fire resistance and electrical functions are not included in this document.
Other methods for the strength and durability of storage components, seating surfaces and other features associated with beds are covered by other standards.
Where a bed incorporates additional functions such as storage, electrical adjustability or conversion from a sofa to a bed, additional tests are applicable.
ISO 19833:2018 does not specify requirements for the choice of loads, cycles or forces. These can be specified in a requirements document. If this is not available, suggested loads and cycles can be found in Annex A (informative).
The tests are not intended to assess the durability of upholstery, e.g. filling materials and covers.
|
Published |
2018-03 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
97.140
Furniture
|
| ISO 21015:2007 |
Office furniture — Office work chairs — Test methods for the determination of stability, strength and durability |
ISO 21015:2007 specifies test methods for determining the stability, strength and durability of office work chairs. Guidance is given on the choice of forces, cycles, etc., for these tests.
The tests are designed to be applied to an article of furniture that is fully assembled and ready for use.
The dimensions in the tests are applicable to office work chairs intended for adult persons.
The tests consist of the application, to various parts of the item, of forces simulating normal functional use, as well as misuse that can reasonably be expected to occur.
The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The test results are valid only for the article tested. When the test results are intended to be applied to other similar articles, it is important that the test specimen be representative of the production model.
Tests carried out according to ISO 21015:2007 are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. The tests have been developed for units/components that have not been in use. However, when properly justified, they can be used for fault investigation.
Data are given for the design of seat loading pads and for the design of stability loading pad.
ISO 21015:2007 does not give any product requirements. These can be specified in a requirements document. If this is not available, possible forces and cycles are suggested. These forces and cycles can be used for adults regardless of their weight and number of working hours.
ISO 21015:2007 does not specify type approval tests for chair components.
Assessment of ageing and degradation is not included. The tests are not intended to assess the durability of upholstery, i.e. filling materials and covers.
|
Published |
2007-06 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
97.140
Furniture
|
| ISO 8980-3:2003 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods |
ISO 8980-3:2003 specifies requirements for the transmittance properties of uncut finished spectacle lenses.
|
Withdrawn |
2003-10 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 21016:2007 |
Office furniture — Tables and desks — Test methods for the determination of stability, strength and durability |
ISO 21016:2007 specifies test methods for the determination of the stability, the strength and the durability of all types of office tables designed for use in the seated and/or standing position, e.g. work tables, height-adjustable tables, meeting tables and desks. It applies to tables that are fully assembled and ready for use.
ISO 21016:2007 does not contain test methods for storage elements, which can be found in ISO 7170.
The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur.
With the exception of the deflection of table tops, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The test results are valid only for the unit/component tested. These results can be used to represent the performance of production models provided that the tested model is representative of the production model.
Tests carried out according to ISO 21016:2007 are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. It is necessary to understand that such tests do not ensure that structural failure will not eventually occur as a result of habitual misuse or after an excessively long period of service. The tests have been developed for units/components that have not been in use. However, when properly justified, they can be used for fault investigation.
ISO 21016:2007 specifies test methods only.
ISO 21016:2007 does not specify requirements. These should be specified in a requirements document. If this is not available, suggested forces and cycles are included in ISO 21016:2007.
ISO 21016:2007 does not include an assessment of ageing or degradation.
|
Published |
2007-07 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.140
Furniture
|
| ISO 22878:2004 |
Castors and wheels — Test methods and apparatus |
ISO 22878:2004 specifies the test methods and apparatus to be used to check the performance of castors and wheels.
|
Published |
2004-04 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
53.060
Industrial trucks
;
97.140
Furniture
|
| ISO 22879:2004 |
Castors and wheels — Requirements for castors for furniture |
ISO 22878:2004 specifies the technical requirements, the appropriate dimensions and the requirements for testing for castors for furniture.
It is applicable to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialized applications.
|
Withdrawn |
2004-04 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 22879:2016 |
Castors and wheels — Requirements for castors for furniture |
ISO 22879:2016 specifies the technical requirements, the appropriate dimensions and the requirements for the testing of castors for furniture.
It is applicable to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialized applications.
NOTE Castors for swivel chairs are specified in ISO 22880.
|
Published |
2016-12 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 22880:2004 |
Castors and wheels — Requirements for castors for swivel chairs |
ISO 22880:2004 specifies the technical requirements, the appropriate dimensions and the requirements for testing of castors, with or without braking devices, that will normally be used on swivel chairs.
|
Withdrawn |
2004-04 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 22880:2016 |
Castors and wheels — Requirements for castors for swivel chairs |
ISO 22880:2016 specifies the technical requirements, the appropriate dimensions and the requirements for the testing of castors, with or without braking devices, which will normally be used on swivel chairs.
|
Published |
2016-12 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 23767:2021 |
Children’s furniture — Mattresses for cots and cribs — Safety requirements and test methods |
This document specifies safety requirements and test methods for mattresses, including mattress bases and mattress toppers, used in children's cots, cribs and suspended baby beds, for domestic and non-domestic use.
This document does not apply to mattresses for carry cots and pram bodies, inflatable mattresses, water mattresses and mattresses used for medical purposes.
|
Published |
2021-07 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
97.140
Furniture
|
| ISO 23769:2021 |
Furniture — Mattresses — Test methods for the determination of functional characteristics |
This document specifies test methods for the determination of the durability, height loss and hardness of mattresses with a height ≥100 mm (and mattress pads when they form a unit with the mattress).
This document applies to adult mattresses for domestic and non-domestic use. It does not apply to water mattresses, air mattresses or standalone mattress pads.
Test methods for the assessment of aging, degradation, fire resistance and electrical functions are not included.
|
Published |
2021-11 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
97.140
Furniture
|
| ISO 24496:2017 |
Office furniture — Office chairs — Methods for the determination of dimensions |
ISO 24496:2017 specifies methods for the determination of the dimensions of office chairs.
ISO 24496:2017 does not contain dimensional specifications or requirements.
|
Withdrawn |
2017-02 |
Edition : 1 |
Number of pages : 65 |
Technical Committee |
97.140
Furniture
|
| ISO/TR 24496:2012 |
Office furniture — Office work chairs — Methods for the determination of dimensions |
|
Withdrawn |
2012-11 |
Edition : 1 |
Number of pages : 69 |
Technical Committee |
97.140
Furniture
|
| ISO 9913-2:2000 |
Optics and optical instruments — Contact lenses — Part 2: Determination of oxygen permeability and transmissibility by the coulometric method |
|
Withdrawn |
2000-02 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 24496:2021 |
Office furniture — Office chairs — Methods for the determination of dimensions |
This document specifies methods for the determination of the dimensions of office chairs.
This document does not contain dimensional specifications or requirements.
|
Published |
2021-02 |
Edition : 2 |
Number of pages : 62 |
Technical Committee |
97.140
Furniture
|
| ISO 9177-1:1989 |
Mechanical pencils — Part 1: Classification, dimensions, performance requirements and testing |
|
Withdrawn |
1989-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-1:2011 |
Mechanical pencils — Part 1: Classification, dimensions, performance requirements and testing |
|
Withdrawn |
2011-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-1:2016 |
Mechanical pencils for technical drawings — Part 1: Classification, dimensions, performance requirements and testing |
ISO 9177-1:2016 specifies classification, dimensions, performance requirements and testing for hand-held mechanical pencils used for technical drawings.
|
Published |
2016-10 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-2:1989 |
Mechanical pencils — Part 2: Black leads — Classification and dimensions |
Two types are available, black leads in which the binding agent is an organic polymer (designated by the letter "P"), and black leads in which the binding agent is clay (designated by the letter "C"). Classification is made according to the degree of hardness. Part 1 deals with the classification, dimensions, performance requirements and testing.
|
Withdrawn |
1989-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-2:2022 |
Mechanical pencils for technical drawings — Part 2: Black leads — Classification and dimensions |
This document specifies a classification and dimensions for black leads used for mechanical pencils for technical drawings.
Two types of black leads are available:
— polymer leads (designated by the letter “P”);
— ceramic leads (designated by the letter “C”).
|
Published |
2022-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-3:1994 |
Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads |
Specifies bending strengths and a test method for black leads of HB hardness degree used for mechanical pencils for technical drawings.
|
Withdrawn |
1994-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-3:2022 |
Mechanical pencils for technical drawings — Part 3: Black leads — Bending strengths of HB leads |
This document specifies bending strengths and a test method for black leads of HB hardness degree used for mechanical pencils for technical drawings.
|
Published |
2022-01 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9994:1995 |
Lighters — Safety specification |
Establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters.
|
Withdrawn |
1995-12 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 9994:2002 |
Lighters — Safety specification |
|
Withdrawn |
2002-03 |
Edition : 3 |
Number of pages : 23 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 9994:2005 |
Lighters — Safety specification |
ISO 9994:2005 establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users.
The safety specification given in this International Standard applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches, nor does it apply to other flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes.
Lighters, being flame-producing devices, can, as do all flame sources, present a potential hazard to users. The safety specification given in this International Standard cannot eliminate all hazards, but is intended to reduce potential hazards to users.
|
Withdrawn |
2005-09 |
Edition : 4 |
Number of pages : 26 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 9994:2005/Amd 1:2008 |
Lighters — Safety specification — Amendment 1: Clarification of structural requirements |
|
Withdrawn |
2008-02 |
Edition : 4 |
Number of pages : 2 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 9994:2018 |
Lighters — Safety specifications |
This document specifies requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users.
This document applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters.
It does not apply to matches and flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes.
|
Published |
2018-12 |
Edition : 5 |
Number of pages : 27 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 11540:1993 |
Caps for writing and marking instruments intended for use by children up to 14 years of age — Safety requirements |
Specifies safety requirements for cap size, ventilated caps (vent area, air flow) and marking. Annex A describes the test for air flow. Caps which do not comply should have the instrument or its packaging labelled with a warning as to the dangers of asphyxiation from pen caps.
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO 11540:2014 |
Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation |
ISO 11540:2014 specifies requirements to reduce the risk of asphyxiation from caps for writing and marking instruments. It relates to such instruments which in normal or foreseeable circumstances are likely to be used by children up to the age of 14 years.
ISO 11540:2014 is not applicable to the following: writing and marking instruments which are designed or only intended for use by adults (e.g. jewellery pens, expensive fountain pens, professional technical pens); transit caps for refills.
|
Withdrawn |
2014-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO 11540:2021 |
Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation |
This document specifies requirements to reduce the risk of asphyxiation from caps for writing and marking instruments. It relates to such instruments which in normal or foreseeable circumstances are likely to be used by children up to the age of 14 years.
This document is not applicable to the following:
— writing and marking instruments which are designed or only intended for use by adults, e.g. jewellery pens, expensive fountain pens, professional technical pens;
— transit caps for refills.
|
Published |
2021-08 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO 12756:1998 |
Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.040.01
Generalities. Terminology. Standardization. Documentation (Vocabularies)
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
01.100.40
Drawing equipment
|
| ISO 12756:1998/Amd 1:2011 |
Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary — Amendment 1: Viscosity of the writing fluid |
|
Withdrawn |
2011-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.040.01
Generalities. Terminology. Standardization. Documentation (Vocabularies)
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
01.100.40
Drawing equipment
|
| ISO 12756:2016 |
Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary |
ISO 12756:2016 defines terms related to ball point pens and roller ball pens.
|
Published |
2016-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.040.01
Generalities. Terminology. Standardization. Documentation (Vocabularies)
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
01.100.40
Drawing equipment
|
| ISO 12757-1:1998 |
Ball point pens and refills — Part 1: General use |
|
Withdrawn |
1998-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 12757-1:2016 |
Ball point pens and refills — Part 1: General use |
ISO 12757-1:2016 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use.
Additional requirements for ball point pens for documentary use are given in ISO 12757‑2.
|
Withdrawn |
2016-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 10938:1998 |
Ophthalmic instruments — Chart projectors |
|
Withdrawn |
1998-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 12757-1:2017 |
Ball point pens and refills — Part 1: General use |
ISO 12757-1:2017 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use.
Additional requirements for ball point pens for documentary use are given in ISO 12757‑2.
|
Published |
2017-12 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 14145-1:1998 |
Roller ball pens and refills — Part 1: General use |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 14145-1:1998/Amd 1:2011 |
Roller ball pens and refills — Part 1: General use — Amendment 1: Ball diameter for tip classification |
|
Withdrawn |
2011-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 14145-1:2016 |
Roller ball pens and refills — Part 1: General use |
ISO 14145-1:2016 establishes minimum quality requirements for roller ball pens (refillable and non-refillable) and refills for general use.
Additional requirements for roller ball pens for documentary use are given in ISO 14145‑2.
|
Withdrawn |
2016-10 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 14145-1:2017 |
Roller ball pens and refills — Part 1: General use |
|
Published |
2017-12 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 20318-1:2019 |
Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 1: Mechanical pencils |
This document specifies classification, dimensions, quality and test methods for hand-held mechanical pencilss which hold and feed out a lead, and are used for general writing. It is also applicable to multi-function pens equipped with a mechanical pencil unit. However, those pencils attached to machinery instruments such as a plotter are excluded.
|
Published |
2019-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 20318-2:2019 |
Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 2: Black leads |
This document specifies classification, dimensions, quality and test methods for black leads used for mechanical pencils for general writing, as specified in ISO 20318-1.
|
Published |
2019-03 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 22702:2003 |
Utility lighters — General consumer-safety requirements |
ISO 22702:2003 gives a consumer-safety specification covering all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods or gas matches), and similar devices. Matches are specifically excluded from the safety specification; flame-producing products intended for igniting cigars, pipes and cigarettes are also specifically excluded from the safety specification.
|
Withdrawn |
2003-11 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 22702:2003/Amd 1:2008 |
Utility lighters — General consumer-safety requirements — Amendment 1: Clarification of requirements and addition of safety symbols |
|
Withdrawn |
2008-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 22702:2018 |
Utility lighters — Safety specifications |
This document specifies requirements for utility lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users.
This document applies to all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods or gas matches), and similar devices.
It does not apply to matches and flame-producing products intended for igniting cigars, pipes and cigarettes.
|
Published |
2018-12 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 27668-1:2009 |
Gel ink ball pens and refills — Part 1: General use |
ISO 27668-1:2009 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use.
Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.
|
Withdrawn |
2009-02 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 27668-1:2016 |
Gel ink ball pens and refills — Part 1: General use |
ISO 27668-1:2016 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use.
Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.
|
Withdrawn |
2016-10 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 27668-1:2017 |
Gel ink ball pens and refills — Part 1: General use |
ISO 27668-1:2017 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use.
Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.
|
Published |
2017-11 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO/CD 6760-1.2 |
Optics and photonics — Test method for temperature coefficient of refractive index of optical glasses — Part 1: Minimum deviation method |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
37.020
Optical equipment
|
| ISO/CD 6760-2.2 |
Optics and photonics — Test method for temperature coefficient of refractive index of optical glasses — Part 2: Interferometric method |
This document specifies the measurement method of reading the change in optical path length associated with the change in optical glass temperature as the number of cycles of the interference stripe light-dark change using the interferometry, and calculating the temperature coefficient of the refractive index from the change in optical path length.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
37.020
Optical equipment
|
| ISO 8036-1:1986 |
Optics and optical instruments — Microscopes — Part 1: Immersion oil for general use in light microscopy |
|
Withdrawn |
1986-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8036-1:1998 |
Optics and optical instruments — Microscopes — Part 1: Immersion oil for general use in light microscopy |
|
Withdrawn |
1998-03 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8036:2006 |
Optics and photonics — Microscopes — Immersion liquids for light microscopy |
ISO 8036:2006 describes the characteristics of immersion liquids used in microscopy. It classifies immersion liquids according to their field of application and specifies requirements and test methods for each type.
The standard further specifies a system of designation for immersion liquids, the information to be included on container labels and the information to be supplied in technical data sheets.
|
Withdrawn |
2006-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8036:2015 |
Microscopes — Immersion liquids for light microscopy |
ISO 8036:2015 describes the characteristics of immersion liquids used in microscopy. It classifies immersion liquids according to their field of application and specifies requirements and test methods for each type.
ISO 8036:2015 further specifies a system of designation for immersion liquids, the information to be included on container labels, and the information to be supplied in technical data sheets.
|
Published |
2015-06 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8037-1:1986 |
Optics and optical instruments — Microscopes — Slides — Part 1: Dimensions, optical properties and marking |
This part of IS0 8037 specifies requirements for dimensions, thickness, optical properties and tolerances for microscope slides used for transmitted light microscopy in the visible spectral range').
NOTE - This part of IS0 8037 does not cover requirements for suitability for fluorescence microscopy.
|
Published |
1986-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8037-2:1997 |
Optics and optical instruments — Microscopes — Slides — Part 2: Quality of material, standards of finish and mode of packaging |
This part of ISO 8037 specifies requirements and test methods for the quality of material, standards of finish and mode of packaging of silicate microscope slides for use in transmitted light microscopy in the visible spectrum range (400 nm to 760 nm).
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8037-2:1997/Cor 1:2002 |
Optics and optical instruments — Microscopes — Slides — Part 2: Quality of material, standards of finish and mode of packaging — Technical Corrigendum 1 |
|
Published |
2002-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8038-1:1997 |
Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 1: Screw thread type RMS (4/5 in x 1/36 in) |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8038-2:2001 |
Optics and optical instruments — Screw threads for microscope objectives and related nosepieces — Part 2: Screw thread type M25 X 0,75 mm |
|
Withdrawn |
2001-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8038:1985 |
Optics and optical instruments — Microscopes — Screw thread for objectives |
|
Withdrawn |
1985-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 1203:1998 |
Photography — Roll film cameras — Back window location |
|
Published |
1998-10 |
Edition : 4 |
Number of pages : 2 |
Technical Committee |
37.040.10
Photographic equipment. Projectors
|
| ISO 8039:2012 |
Microscopes — Values, tolerances and symbols for magnification |
ISO 8039:2012 specifies a series of values, tolerances and symbols for the magnification of imaging components of light microscopes and defines a number of imaging components and magnifying systems to which they apply.
|
Withdrawn |
2012-10 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8039:2014 |
Microscopes — Values, tolerances and symbols for magnification |
ISO 8039:2014 specifies a series of values, tolerances, and symbols for the magnification of imaging components of light microscopes and defines a number of imaging components and magnifying systems to which they apply.
|
Published |
2014-12 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8040:1986 |
Optics and optical instruments — Microscopes — Connecting dimensions of tube slides and tube slots |
|
Withdrawn |
1986-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8040:2001 |
Optics and optical instruments — Microscopes — Dimensions of tube slide and tube slot connections |
|
Withdrawn |
2001-01 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
37.020
Optical equipment
|
| ISO/CD 8237-1 |
Optical materials and components — Specification of chalcogenide glass used in the infrared spectrum — Part 1: Definitions and general |
This document defines the chalcogenide glass correctly from the perspective of chemical and specifies basic characterization and reporting method of chalcogenide glass used in the infrared spectral range from 0,78 μm to 25 μm.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
37.020
Optical equipment
|
| ISO 8255-1:1986 |
Optics and optical instruments — Microscopes — Cover glasses — Part 1: Dimensional tolerances, thickness and optical properties |
|
Withdrawn |
1986-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8255-1:2011 |
Microscopes — Cover glasses — Part 1: Dimensional tolerances, thickness and optical properties |
ISO 8255-1:2011 specifies requirements for dimensional tolerances, thickness and optical properties for microscope cover glasses used for transmitted light microscopy in the visible spectral range (400 nm to 760 nm).
|
Withdrawn |
2011-04 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8255-1:2017 |
Microscopes — Cover glasses — Part 1: Dimensional tolerances, thickness and optical properties |
ISO 8255-1:2017 specifies requirements for dimensional tolerances, thickness and optical properties for microscope cover glasses used for transmitted light microscopy in the visible spectral range (400 nm to 760 nm).
|
Published |
2017-06 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8255-2:1997 |
Optics and optical instruments — Microscopes — Cover glasses — Part 2: Quality of materials, standards of finish and mode of packaging |
|
Withdrawn |
1997-11 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8255-2:2013 |
Microscopes — Cover glasses — Part 2: Quality of materials, standards of finish and mode of packaging |
ISO 8255-2:2013 specifies requirements and methods of test for the quality of material, standards of finish, and mode of packaging for microscope cover glasses.
ISO 8255-2:2013 is applicable to microscope cover glasses for use in transmitted light microscopy (400 nm to 760 nm).
|
Published |
2013-09 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8576:1996 |
Optics and optical instruments — Microscopes — Reference system of polarized light microscopy |
Establishes a reference system incorporating all calibrated motions of rotation and displacement on the microscope and its accessories so that the measuring procedures are uniform. Particular attention is given to the polarization parameters and measuring accessories.
|
Published |
1996-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8577:1997 |
Optics and optical instruments — Microscopes — Spectral filters |
|
Withdrawn |
1997-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8578:1997 |
Microscopes — Marking of objectives and eyepieces |
|
Withdrawn |
1997-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8578:1997/Cor 1:2002 |
Microscopes — Marking of objectives and eyepieces — Technical Corrigendum 1 |
|
Withdrawn |
2002-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.020
Optical equipment
|
| ISO 11978:2017/Amd 1:2020 |
Ophthalmic optics — Contact lenses and contact lens care products — Labelling — Amendment 1 |
|
Published |
2020-10 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8578:2012 |
Microscopes — Marking of objectives and eyepieces |
ISO 8578:2012 specifies the format for the marking of data or symbols for optical characteristics on microscope objectives and eyepieces and the positioning of the data. It makes recommendations for the marking of additional information, particularly colour coding of rings designating the magnification of objectives and the immersion media with which they are used.
|
Published |
2012-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8600-5:2005 |
Optics and photonics — Medical endoscopes and endotherapy devices — Part 5: Determination of optical resolution of rigid endoscopes with optics |
ISO 8600-5:2005 specifies a test method for determining the optical resolution of rigid endoscopes with optics designed for use in the practice of medicine for type testing. Endoscopes having a fibre-optic or opto-electronic imaging system are excluded.
|
Withdrawn |
2005-03 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.020
Optical equipment
;
11.040.55
Diagnostic equipment
|
| ISO 8600-5:2020 |
Optics and photonics — Medical endoscopes and endotherapy devices — Part 5: Determination of optical resolution of rigid endoscopes with optics |
This document applies to rigid endoscopes designed for use in the practice of medicine. Endoscopes having a fibre-optic or opto-electronic imaging system are excluded. It specifies a test method for determining the optical resolution of endoscopes.
This document provides a measurement method for characterizing three aspects of the optical resolution of a rigid endoscope. Characteristic A is used to provide a simple measurement of the limiting resolution of the endoscope image. Characteristic B provides a measurement of low spatial frequency resolution and characterizes the sharpness, or contrast, of the endoscope image. Characteristic C provides a measurement of the spatial frequency response of the endoscope image.
|
Published |
2020-11 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
37.020
Optical equipment
;
11.040.55
Diagnostic equipment
|
| ISO 8600-6:2005 |
Optics and photonics — Medical endoscopes and endotherapy devices — Part 6: Vocabulary |
ISO 8600-6:2005 defines terms for endoscopes and endotherapy devices commonly used in the endoscopic area.
|
Withdrawn |
2005-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.020
Optical equipment
;
01.040.37
Image technology (Vocabularies)
;
11.040.55
Diagnostic equipment
|
| ISO 8600-6:2020 |
Endoscopes — Medical endoscopes and endotherapy devices — Part 6: Vocabulary |
This document defines terms for endoscopes and endotherapy devices commonly used in the endoscopic area. This document does not define general medical terms or other general terms. This document does not define terms that should be defined in other ISO 8600 (all parts).
|
Published |
2020-09 |
Edition : 2 |
Number of pages : 25 |
Technical Committee |
37.020
Optical equipment
;
01.040.37
Image technology (Vocabularies)
;
11.040.55
Diagnostic equipment
|
| ISO 8600-8:2021 |
Endoscopes — Medical endoscopes and endotherapy devices — Part 8: Particular requirements for capsule endoscopes |
This document applies to capsule endoscopes used for clinical practice. The document defines relevant terms and gives requirements for them.
|
Published |
2021-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
;
11.040.55
Diagnostic equipment
|
| ISO 9022-1:1994 |
Optics and optical instruments — Environmental test methods — Part 1: Definitions, extent of testing |
Defines terms relating to environmental tests of optical instruments and of instruments including optical assemblies and optical components, and specifies basic features of testing.
|
Withdrawn |
1994-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-1:2012 |
Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing |
|
Withdrawn |
2012-04 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-1:2016 |
Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing |
ISO 9022-1:2016 defines terms relating to environmental tests of optical and photonic instruments, including additional assemblies from other fields (e.g. mechanical, chemical and electronic devices), and specifies basic features of testing.
|
Published |
2016-07 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-2:1994 |
Optics and optical instruments — Environmental test methods — Part 2: Cold, heat, humidity |
Specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist temperature and air humidity. The purpose of testing is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance characteristics are affected by temperature and/or humidity.
|
Withdrawn |
1994-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-2:2002 |
Optics and optical instruments — Environmental test methods — Part 2: Cold, heat and humidity |
This part of ISO 9022 specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist temperature and air humidity.
The purpose of testing is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance characteristics of the specimen are affected by temperature and/or humidity.
|
Withdrawn |
2002-10 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-2:2015 |
Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity |
ISO 9022-2:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of temperature and/or humidity.
The purpose of the testing is to investigate to what extent optical, climatic, mechanical, chemical, and electrical (including electrostatic) performance characteristics of the specimen are affected by temperature and/or humidity.
|
Published |
2015-03 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-2:2015/DAmd 1 |
Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity — Amendment 1 |
|
Under development |
|
Edition : 3 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-3:1994 |
Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress |
|
Withdrawn |
1994-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-3:1998 |
Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress |
|
Withdrawn |
1998-07 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
37.020
Optical equipment
|
| ISO 9022-3:2015 |
Optics and photonics — Environmental test methods — Part 3: Mechanical stress |
ISO 9022-3:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of mechanical stress.
The purpose of the testing is to investigate to what extent the optical, climatic, mechanical, chemical, and electrical (including electrostatic) performance characteristics of the specimen are affected by mechanical stress.
|
Withdrawn |
2015-03 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
37.020
Optical equipment
|