| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/TR 14999-2:2005 |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques |
ISO/TR 14999-2:2005 gives fundamental explanations to interferometric measurement objects, describes hardware aspects of interferometers and evaluation methods, and gives recommendations for test reports and calibration certificates.
|
Withdrawn |
2005-03 |
Edition : 1 |
Number of pages : 59 |
Technical Committee |
37.020
Optical equipment
|
| ISO/TR 14999-2:2019 |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques |
This document gives fundamental explanations to interferometric measurement objects, describes hardware aspects of interferometers and evaluation methods, and gives recommendations for test reports and calibration certificates.
|
Published |
2019-07 |
Edition : 2 |
Number of pages : 63 |
Technical Committee |
37.020
Optical equipment
|
| ISO/TR 14999-3:2005 |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 3: Calibration and validation of interferometric test equipment and measurements |
ISO/TR 14999-3:2005 discusses sources of error and the separation of errors into symmetric and non-symmetric parts. It also describes the reliance of measurements on the quality of a physical reference surface and the development of test procedures capable of achieving absolute calibration.
|
Published |
2005-03 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
37.020
Optical equipment
|
| ISO 14999-4:2007 |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 |
ISO 14999-4:2007 applies to the interpretation of interferometric data relating to the measurement of optical elements.
ISO 14999-4:2007 gives definitions of the optical functions specified in the preparation of drawings for optical elements and systems as well as guidance for their interferometric evaluation with visual analysis.
|
Withdrawn |
2007-07 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
37.020
Optical equipment
|
| ISO 14999-4:2015 |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 |
ISO 14999-4:2015 applies to the interpretation of interferometric data relating to the measurement of optical elements.
ISO 14999-4:2015 gives definitions of the optical functions and values specified in the preparation of drawings for optical elements and systems, made in accordance with ISO 10110‑5 and/or ISO 10110‑14 for which the corresponding nomenclature, functions, and values are listed in ISO 10110‑5, Annex B. It also provides guidance for their interferometric evaluation by visual analysis.
|
Published |
2015-08 |
Edition : 2 |
Number of pages : 27 |
Technical Committee |
37.020
Optical equipment
|
| ISO 15227:2000 |
Optics and optical instruments — Microscopes — Testing of stereomicroscopes |
This International Standard specifies test conditions and recommended test methods to ensure the minimum
requirements for stereomicroscopes. These minimum requirements are given in ISO 10936-1, ISO 11884-1 and
ISO 11884-2.
The test methods specified in this International Standard are recommended, but use of other test methods is
permitted if the same results are obtained.
|
Published |
2000-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
37.020
Optical equipment
|
| ISO 15362:1998 |
Optics and optical instruments — Stereomicroscopes — Information provided to the user |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
|
| ISO 15362:2014 |
Stereomicroscopes — Information provided to the user |
ISO 15362:2014 specifies the minimum information to be provided by the manufacturer of stereomicroscopes to the user.
In addition to the mandatory information (m), further data are recommended (r).
|
Published |
2014-09 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
|
| ISO 15632:2002 |
Microbeam analysis — Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors |
ISO 15632 defines the most important quantities that characterize an energy dispersive X-ray spectrometer (EDS) consisting of a semiconductor detector, a pre-amplifier and a signal processing unit as the essential parts. This International Standard is only applicable to spectrometers with semiconductor detectors operating on the principle of solid state ionization. It specifies minimum requirements for such spectrometers attached to an electron probe microanalyser (EPMA) or a scanning electron microscope (SEM). Realization of the analysis is outside the scope of this International Standard.
|
Withdrawn |
2002-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
37.020
Optical equipment
;
71.040.99
Other standards related to analytical chemistry
|
| ISO 15795:2002 |
Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations |
This International Standard defines terms relating to chromatic aberrations and indicates the mathematical relationships between those terms.
It also gives general guidance for the measurement of chromatic aberrations and is valid for optical imaging systems which are constructed to be of rotational symmetric imaging geometry. It is also valid for optoelectronic imaging systems.
|
Published |
2002-04 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
37.020
Optical equipment
|
| ISO 15795:2002/Cor 1:2007 |
Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations — Technical Corrigendum 1 |
|
Published |
2007-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.020
Optical equipment
|
| ISO 15932:2013 |
Microbeam analysis — Analytical electron microscopy — Vocabulary |
ISO 15932:2013 defines terms used in the practice of AEM. It covers both general and specific concepts classified according to their hierarchy in a systematic order. It is applicable to all standardization documents relevant to the practice of AEM. In addition, some parts of this International Standard are applicable to those documents relevant to the practice of related fields (e.g. TEM, STEM, SEM, EPMA, EDX) for the definition of those terms common to them.
|
Published |
2013-12 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
37.020
Optical equipment
;
01.040.37
Image technology (Vocabularies)
|
| ISO 16700:2004 |
Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
ISO 16700:2004 specifies a method for calibrating the magnification of images generated by a scanning electron microscope (SEM) using an appropriate reference material. This method is limited to magnifications determined by the available size range of structures in the calibrating reference material. This International Standard does not apply to the dedicated critical dimension measurement SEM.
|
Withdrawn |
2004-03 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
37.020
Optical equipment
|
| ISO 16700:2016 |
Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
ISO 16700:2016 specifies a method for calibrating the magnification of images generated by a scanning electron microscope (SEM) using an appropriate reference material. This method is limited to magnifications determined by the available size range of structures in the calibrating reference material. It does not apply to the dedicated critical dimension measurement SEM.
|
Published |
2016-08 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
37.020
Optical equipment
|
| ISO/TR 16743:2013 |
Optics and photonics — Wavefront sensors for characterising optical systems and optical components |
ISO/TR 16743:2013 gives terms and definitions and describes techniques for the characterization of wavefronts influenced by optical systems and optical components. It describes basic configurations for a variety of wavefront sensing systems and discusses the usefulness of tests in different situations.
|
Published |
2013-03 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
37.020
Optical equipment
|
| ISO 17328:2014 |
Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials |
ISO 17328:2014 provides a standard method for measuring the relative refractive index to the air of infrared materials used in the infrared spectral range from 0,78 µm to 25 µm.
|
Withdrawn |
2014-10 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
37.020
Optical equipment
|
| ISO 17328:2021 |
Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials |
This document provides a standard method for measuring the relative refractive index to the air of infrared materials used in the infrared spectral range from 0,78 µm to 25 µm.
This document excludes methods for measuring the refractive index of birefringent materials and methods for measuring the complex refractive index.
|
Published |
2021-11 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
37.020
Optical equipment
|
| ISO 17411:2014 |
Optics and photonics — Optical materials and components — Test method for homogeneity of optical glasses by laser interferometry |
ISO 17411:2014 specifies the measuring method for the homogeneity of the refractive index of optical glasses by laser interferometry.
|
Withdrawn |
2014-06 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
37.020
Optical equipment
|
| ISO 17411:2022 |
Optics and photonics — Optical materials and components — Test method for homogeneity of optical glasses by laser interferometry |
This document specifies the measuring method for the homogeneity of the refractive index of optical glasses by laser interferometry to cope with the grades from ISO 10110-18 and ISO 12123.
|
Published |
2022-12 |
Edition : 2 |
Number of pages : 27 |
Technical Committee |
37.020
Optical equipment
|
| ISO 18221:2016 |
Microscopes — Microscopes with digital imaging displays — Information provided to the user regarding imaging performance |
ISO 18221:2016 specifies the minimum information to be provided to the user by the manufacturers of microscopes with digital displays regarding imaging performance.
It further specifies terms and definitions for describing the optical performance of the digital imaging path of microscopy systems including the observation of the image on digital displays.
NOTE Terms and definitions for the direct visual observation with eyepieces are specified in ISO 8039 and ISO 10934‑1.
|
Published |
2016-07 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19012-1:2007 |
Optics and photonics — Designation of microscope objectives — Part 1: Flatness of field/Plan |
ISO 19012-1:2007 specifies the use of the marking, "Plan" on microscope objectives, and defines the diameter of the sharp region of the primary image of a flat object surface. ISO 19012-1:2007 applies to visual observation using the combination of objective lens, tube lens and eyepiece as specified by the manufacturer.
|
Withdrawn |
2007-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19012-1:2011 |
Microscopes — Designation of microscope objectives — Part 1: Flatness of field/Plan |
ISO 19012-1:2011 specifies the use of the marking "Plan" on microscope objectives, and defines the diameter of the sharp region of the primary image of a flat object surface.
ISO 19012-1:2011 applies to visual observation using the combination of objective lens, tube lens and eyepiece, as specified by the manufacturer.
|
Withdrawn |
2011-07 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19012-1:2013 |
Microscopes — Designation of microscope objectives — Part 1: Flatness of field/Plan |
ISO 19012-1:2013 specifies the use of the marking "Plan" on microscope objectives, and defines the diameter of the sharp region of the primary image of a flat object surface. ISO 19012-1:2013 applies to visual observation using the combination of objective lens, tube lens and eyepiece, as specified by the manufacturer.
This marking is consistent with ISO 8578.
|
Published |
2013-05 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
37.020
Optical equipment
|
| ISO 8321-2:2000 |
Ophthalmic optics — Specifications for material, optical and dimensional properties of contact lenses — Part 2: Single-vision hydrogel contact lenses |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 19012-2:2009 |
Optics and photonics — Designation of microscope objectives — Part 2: Chromatic correction |
ISO 19012-2:2009 specifies classes of chromatic correction and defines minimum requirements regarding chromatic correction. The defined marking on the component enables the operator to correctly use the microscope.
The standard application for visual observation refers to the combination of objective and tube lens as specified by the manufacturer. The specifications regarding chromatic correction only refer to axial chromatic aberration.
|
Withdrawn |
2009-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19012-2:2013 |
Microscopes — Designation of microscope objectives — Part 2: Chromatic correction |
ISO 19012-2:2013 specifies classes of chromatic correction and defines minimum requirements regarding chromatic correction. The defined marking on the component enables the operator to correctly use the microscope.
The standard application for visual observation refers to the combination of objective and tube lens as specified by the manufacturer. The specifications regarding chromatic correction only refer to axial chromatic aberration.
|
Published |
2013-02 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19012-3:2015 |
Microscopes — Designation of microscope objectives — Part 3: Spectral transmittance |
ISO 19012-3:2015 specifies the relation of spectral characteristics between optical design and the description to microscope users for the spectral transmittance of objectives, as the guideline.
NOTE This part of ISO 19012 does not apply to objectives exclusively used on stereomicroscopes.
|
Published |
2015-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
|
| ISO/DIS 19012-4 |
Microscopes — Designation of microscope objectives — Part 4: Polarization characteristics |
This document specifies the use of the marking on objectives for polarization microscope, and defines measurands and measurement procedures of polarization characteristics of the objectives for qualitative polarization imaging. These measurements are defined on the image plane of the objective lens.
This marking is consistent with ISO 8578.
NOTE: This document does not apply to objectives exclusively used on stereomicroscopes.
|
Under development |
|
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19055:2015 |
Microscopes — Minimum requirements for binocular tubes |
ISO 19055:2015 specifies the minimum requirements regarding image quality and viewing ergonomics for binocular tubes for compound microscopes when used with eyepieces as specified by the manufacturer. ISO 19055:2015 makes a distinction between binocular tubes with and without dioptre adjustment.
|
Published |
2015-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19056-1:2015 |
Microscopes — Definition and measurement of illumination properties — Part 1: Image brightness and uniformity in bright field microscopy |
ISO 19056-1:2015 specifies procedures for the measurement of image brightness and uniformity for bright field light microscopy. These measurements for image brightness and uniformity are defined in image planes or intermediate image planes only, when these planes are suitable for detection by electronic imaging devices.
ISO 19056-1:2015 defines how image brightness and uniformity are measured and how this information is provided to the user.
NOTE The scope is intentionally limited to electronic imaging devices and (intermediate) image planes. The visual observation by means of eyepieces would require a different measurement procedure and hence result in unambiguities in the description of measurement procedures. Nevertheless, this part of ISO 19056 will give useful estimates for the image brightness with visual observation as in this case, an eyepiece is used to observe an intermediate image plane (which is under the scope of this part of ISO 19056).
|
Published |
2015-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19056-2:2019 |
Microscopes — Definition and measurement of illumination properties — Part 2: Illumination properties related to the colour in bright field microscopy |
This document specifies measurands and measurement procedures of colour properties for bright field microscopy with transmitted light illumination. These measurements are defined in image planes or intermediate image planes.
This document also specifies how the information is provided to the user.
|
Published |
2019-11 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19056-3:2022 |
Microscopes — Definition and measurement of illumination properties — Part 3: Incident light fluorescence microscopy with incoherent light sources |
This document specifies procedures for the measurement of illumination brightness, temporal stability and uniformity for incident light fluorescence microscopy. The measurement for uniformity is defined in image planes or intermediate image planes only, when these planes are suitable for detection by electronic imaging devices.
This document defines how illumination brightness, temporal stability and uniformity are measured, and how this information is provided to the user.
NOTE The scope is intentionally limited to electronic imaging devices and (intermediate) image planes. The visual observation by means of eyepieces would require a different measurement procedure and hence result in ambiguities in the description of measurement procedures. Nevertheless, this document will give useful estimates for the uniformity with visual observation as in this case an eyepiece is used to observe an intermediate image plane (which is under the scope of this document).
|
Published |
2022-01 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19740:2018 |
Optics and photonics — Optical materials and components — Test method for homogeneity of infrared optical materials |
This document specifies the principle, apparatus, condition, sample, procedure and data processing of measuring homogeneity of infrared optical materials.
It is applicable to the determination of homogeneity of infrared optical materials, such as infrared optical glass, infrared crystals and infrared ceramics, which are opaque to visible wavelengths and whose transmission optical spectra are beyond 0,78 µm.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19741:2018 |
Optics and photonics — Optical materials and components — Test method for striae in infrared optical materials |
This document specifies the principle, apparatus, condition, sample, procedure and data processing of measuring striae in infrared optical materials.
It is applicable to the determination of striae in infrared optical materials, such as infrared optical glass, which is opaque to visible wavelengths and whose transmission optical spectra are beyond 0,78 µm.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.020
Optical equipment
|
| ISO 19742:2018 |
Optics and photonics — Optical materials and components — Test method for bubbles and inclusions in infrared optical materials |
This document specifies the apparatus, condition, sample, procedure and data processing of measuring bubbles and inclusions in infrared optical materials.
It is applicable to the determination of bubbles and inclusions in infrared optical materials, such as infrared optical glass, infrared crystals and infrared ceramics, which are opaque to visible wavelengths and whose transmission optical spectra are beyond 0,78 µm.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.020
Optical equipment
|
| ISO 20263:2017 |
Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials |
ISO 20263:2017 specifies a procedure for the determination of averaged interface position between two different layered materials recorded in the cross-sectional image of the multi-layered materials. It is not intended to determine the simulated interface of the multi-layered materials expected through the multi-slice simulation (MSS) method. This document is applicable to the cross-sectional images of the multi-layered materials recorded by using a transmission electron microscope (TEM) or a scanning transmission electron microscope (STEM) and the cross-sectional elemental mapping images by using an energy dispersive X-ray spectrometer (EDS) or an electron energy loss spectrometer (EELS). This document is also applicable to the digitized image recorded on an image sensor built into a digital camera, a digital memory set in the PC or an imaging plate and the digitalized image converted from an analogue image recorded on the photographic film by an image scanner.
|
Published |
2017-11 |
Edition : 1 |
Number of pages : 45 |
Technical Committee |
37.020
Optical equipment
;
71.040.50
Physicochemical methods of analysis
|
| ISO 20473:2007 |
Optics and photonics — Spectral bands |
ISO 20473:2007 specifies the division of optical radiation into spectral bands for optics and photonics. It does not apply to lighting or telecommunication applications or to protection against hazards from optical radiation in occupational areas.
|
Published |
2007-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.020
Optical equipment
|
| ISO 20711:2017 |
Optics and photonics — Environmental requirements — Test requirements for telescopic systems |
ISO 20711:2017 specifies requirements to be met with regard to resistance of the optical, mechanical, chemical and electrical properties or performance data of instruments to environmental influences and hence determines geographical and technical areas of application. It applies to consumer telescopic systems and accessories, such as hunting and sporting products.
Environmental test methods as specified in relevant parts of ISO 9022 are assigned to the various areas of application for the purpose of ascertaining the suitability of the instruments in their respective area of application.
ISO 20711:2017 is the basis for the specification of environmental requirements and environmental tests in instrument standards. If necessary, these requirements and tests can be amended in the instrument standards.
ISO 20711:2017 does not deal with the requirements to be met by the packaging of the instrument during transport from the manufacturer to the user.
NOTE Nominal values of properties and performance characteristics as understood by this document are predetermined by specifications provided by the manufacturer, technical terms of delivery and instrument standards.
|
Published |
2017-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
37.020
Optical equipment
|
| ISO 21073:2019 |
Microscopes — Confocal microscopes — Optical data of fluorescence confocal microscopes for biological imaging |
This document specifies commonly used quantities regarding image performance in confocal laser scanning microscopy used for imaging of fluorescent biological specimens.
This document applies only to confocal single point scanners using single photon excitation.
|
Published |
2019-12 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
37.020
Optical equipment
|
| ISO 21094:2008 |
Optics and photonics — Telescopic systems — Specifications for night vision devices |
ISO 21094:2008 applies to night vision devices such as binoculars, monoculars and goggles that are used for observation activities at night such as rescue actions under low light conditions, urgent repairs in the dark and night time surveillance.
|
Published |
2008-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
|
| ISO/TS 21383:2021 |
Microbeam analysis — Scanning electron microscopy — Qualification of the scanning electron microscope for quantitative measurements |
This document describes methods to qualify the scanning electron microscope with the digital imaging system for quantitative and qualitative SEM measurements by evaluating essential scanning electron microscope performance parameters to maintain the performance after installation of the instruments. The items and evaluating methods of the performance parameters are selected by users for their own purposes.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 59 |
Technical Committee |
37.020
Optical equipment
|
| ISO 21395-1:2020 |
Optics and photonics — Test method for refractive index of optical glasses — Part 1: Minimum deviation method |
This document specifies the measuring method for the refractive index of optical glasses with the accuracy within 1 × 10−5 used in the spectral range from 365 nm to 2 400 nm.
Additional information on how to apply the refractive index in the dispersion and the various dispersion formulae of optical glasses is given in Annex A and Annex B.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
37.020
Optical equipment
|
| ISO 21395-2:2022 |
Optics and photonics — Test method for refractive index of optical glasses — Part 2: V-block refractometer method |
This document specifies a method to determine the refractive index of optical glass with the accuracy within 3 × 10-5 at the wavelength range from 365 nm to 2 400 nm by using the V-block refractometer method.
While this document can be used for non-glass materials, the user is informed that only optical glass has been considered in the development of this document, and other materials can have issues, which have not been taken into consideration.
|
Published |
2022-02 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
37.020
Optical equipment
|
| ISO 21466:2019 |
Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM |
This document specifies the structure model with related parameters, file format and fitting procedure for characterizing critical dimension (CD) values for wafer and photomask by imaging with a critical dimension scanning electron microscope (CD-SEM) by the model-based library (MBL) method. The method is applicable to linewidth determination for specimen, such as, gate on wafer, photomask, single isolated or dense line feature pattern down to size of 10 nm.
|
Published |
2019-12 |
Edition : 1 |
Number of pages : 47 |
Technical Committee |
37.020
Optical equipment
|
| ISO/TR 21477:2017 |
Optics and photonics — Preparation of drawings for optical elements and systems — Surface imperfection specification and measurement systems |
ISO/TR 21477:2017 intends to guide the user to understand the origins, meanings and differences between the two systems of specifying and evaluating surface imperfections in ISO 10110-7 and ISO 14997, specifically the dimensional method and the visibility method, and to provide information on how to use them. Tables are provided to show specifications of roughly equivalent yield loss for imperfections in the two systems.
|
Published |
2017-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO 21575:2018 |
Optics and photonics — Optical materials and components — The powder test method for the water resistance of optical glass |
This document specifies the general procedures of the powder test method for the water resistance of optical glass.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.020
Optical equipment
|
| ISO 22493:2008 |
Microbeam analysis — Scanning electron microscopy — Vocabulary |
ISO 22493:2008 defines terms used in the practice of scanning electron microscopy (SEM). It covers both general and specific concepts classified according to their hierarchy in a systematic order, with those terms that have already been defined in ISO 23833 also included, where appropriate.
The vocabulary is applicable to all standardization documents relevant to the practice of SEM. In addition, some clauses of the vocabulary are applicable to documents relevant to related fields (e.g. EPMA, AEM, EDS) for the definition of terms which are relevant to such fields.
|
Withdrawn |
2008-10 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
37.020
Optical equipment
;
01.040.37
Image technology (Vocabularies)
|
| ISO 22493:2014 |
Microbeam analysis — Scanning electron microscopy — Vocabulary |
ISO 22493:2014 defines terms used in the practice of scanning electron microscopy (SEM). It covers both general and specific concepts, classified according to their hierarchy in a systematic order, with those terms that have already been defined in ISO 23833 also included, where appropriate.
ISO 22493:2014is applicable to all standardization documents relevant to the practice of SEM. In addition, some clauses of ISO 22493:2014 are applicable to documents relevant to related fields (e.g. EPMA, AEM, EDS) for the definition of terms which are relevant to such fields.
|
Published |
2014-04 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
37.020
Optical equipment
;
01.040.37
Image technology (Vocabularies)
|
| ISO 22531:2020 |
Optics and photonics — Optical materials and components — Test method for climate resistance of optical glass |
This document specifies the test method for climate resistance of optical glass and the classification of the optical glass according to the test results.
|
Published |
2020-05 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
37.020
Optical equipment
|
| ISO 22576:2020 |
Optics and photonics — Optical materials and components — Specification of calcium fluoride used in the infrared spectrum |
This document specifies calcium fluoride used in the infrared spectral range from 0,78 µm to 10 µm.
The material specified in this document can also transmit light in other spectral domains (ultraviolet and visible).
|
Published |
2020-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.020
Optical equipment
|
| ISO 23364:2021 |
Optics and Photonics — Bulk absorption optical filters |
This document specifies filter functions of uncoated bulk absorption filters for optical applications excluding ophthalmic optics (spectacles) and gives a standard form for their specification. Additionally, basic definitions and a description of the specification concerning optical bulk absorption filters are given.
This document specifies the optical properties of the filters and the test and measurement methods whenever necessary.
This document does not specify any material properties (internal quality, homogeneity, etc.) and it does not apply to any production method.
This document applies to both the raw material (filter glass, filter plastics, etc.) and the polished component.
NOTE 1 Colorimetric parameters for the description of the filter function are specified in e.g. ISO 11664‑1 and ISO 11664‑2.
NOTE 2 For filters where the spectral transmission characteristics are achieved by the application of optical coatings, see ISO 9211 series.
NOTE 3 In the case of high power applications, further optical effects may occur.
|
Published |
2021-04 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
37.020
Optical equipment
|
| ISO 23584-1:2009 |
Optics and photonics — Specification of reference dictionary — Part 1: General overview on organization and structure |
ISO 23584-1:2009 provides the basis for the preparation of a reference dictionary of standardized product properties for the area of optics and photonics, and for the provision of this reference dictionary and its entire contents in electronic form.
ISO 23584-1:2009, on the basis of the rules set forth in ISO 13584-42, IEC 61360-1 and in the ISO/IEC Guide 77-2 for specification of product properties and families, specifies a reference dictionary of standardized product properties for the area of optics and photonics.
The properties are determined on the basis of standardized attributes. To ensure optimum unambiguity the standardized properties are classified into definition classes forming a so-called standardized “reference hierarchy”.
|
Published |
2009-05 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
37.020
Optical equipment
|
| ISO 23584-2:2012 |
Optics and photonics — Specification of reference dictionary — Part 2: Classes' and properties' definitions |
ISO 23584-2:2012, on the basis of the rules set forth in ISO 13584-42, ISO/IEC Guide 77-2 and IEC 61360-1, specifies a reference dictionary of standardized product properties for the area of optics and photonics.
The properties are determined on the basis of standardized attributes. To ensure optimum unambiguity, the standardized properties are classified into definition classes forming a so-called standardized "reference hierarchy".
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 101 |
Technical Committee |
37.020
Optical equipment
|
| ISO/TS 24597:2011 |
Microbeam analysis — Scanning electron microscopy — Methods of evaluating image sharpness |
ISO/TS 24597:2011 specifies methods of evaluating the sharpness of digitized images generated by a scanning electron microscope by means of a Fourier transform method, a contrast-to-gradient method and a derivative method.
|
Published |
2011-06 |
Edition : 1 |
Number of pages : 87 |
Technical Committee |
37.020
Optical equipment
|
| ISO 25297-1:2010 |
Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model |
ISO 25297-1:2010 specifies the information requirements for optical systems and parts, and provides an information model to support the processes of optical design, optical evaluation and analysis for these optical systems and parts when using computers with CAD and CAE.
This information model adds the data peculiar to optical design specification based on STEP to ISO 10303 (all parts). The additional information is product specification information, optical design information, optical evaluation information and analysis information.
ISO 25297-1:2010 is generically called the Neutral Optical Data Interchange Format (NODIF).
The following are within the scope: information on product specification, optical design, optical evaluation and analysis; optical systems and parts in imaging systems, such as cameras and copiers, viewing systems for telescopes and microscopes and the other optical systems, such as projectors and pick-up lenses; multiple-configuration optical systems, including zoom lenses and inner focusing systems; optical path definition, including ray-path sequence and optical surface arrangement; optical assemblies, including cemented parts and dynamic parts; mathematical description of the optical surface form; description of diffractive surfaces; machining process designation, such as polishing, moulding or replicating; optical material specifications, such as material names, lot numbers and measured refractive indices; optical tolerances for the shape and material property of each optical part; assembly tolerances, such as separation, parallelism, displacement and tilt; effective diameters, coatings and protective surface treatment; paraxial evaluation, such as focal length, back focal length, principal points and f-number; ray-tracing evaluation, such as geometrical ray-tracing results (i.e. ray directions and intersection points on each surface and optical path lengths), aberrations and wavefront aberration; OTF evaluation based on geometrical and/or physical optics; illuminance distribution on a detection surface or a projection surface; spectral characteristics; ghost image evaluation; thermal analysis accompanying optical surface deformation and material property value change; stress analysis accompanying optical surface deformation and material property value change; and veiling glare and surface imperfections.
The following are outside the scope of this part of ISO 25297: mechanical design, electronic design and embedded software design; optical systems in which the optical path is changeable, e.g. beam splitters or variable magnification converters; tolerances for mechanical parts; parts with a diameter less than 10 times the wavelength of light; parts made from materials whose dielectric constant, σ, electric permittivity, ε, and magnetic permittivity, μ, are uninfluenced by interaction between the materials and the light; graphical documents resulting from design, evaluation and analysis of products; optical wave guide for optical communications; product planning information concerning market research and customer analysis; product definition and configuration control information irrelevant to design, evaluation and analysis; analysis information, except thermal and stress analysis, e.g. vibration analysis; information on trial production, production process including production planning and production control, and processes after production, such as shipment and repair; and ophthalmic optics.
|
Withdrawn |
2010-08 |
Edition : 1 |
Number of pages : 85 |
Technical Committee |
37.020
Optical equipment
|
| ISO 25297-1:2012 |
Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model |
This part of ISO 25297 specifies the information requirements for optical systems and parts, and provides an
information model to support the processes of optical design, optical evaluation and analysis for these optical
systems and parts when using computers with CAD and CAE.
NOTE Generally, an optical system means an optical unit as an optical product, which performs optical functions,
and is composed of optical elements and the barrels in which these elements are mounted. In this part of ISO 25297, an
optical system is a collection of optical parts and optical assemblies, e.g. the viewfinder system or the taking lens system
of a leaf shutter camera.
This information model adds the data peculiar to optical design specification based on STEP to ISO 10303
(all parts). The additional information is product specification information, optical design information, optical
evaluation information and analysis information.
This part of ISO 25297 is generically called the Neutral Optical Data Interchange Format (NODIF).
The following are within the scope:
— information on product specification, optical design, optical evaluation and analysis;
— optical systems and parts in imaging systems, such as cameras and copiers, viewing systems for
telescopes and microscopes and the other optical systems, such as projectors and pick-up lenses;
— multiple-configuration optical systems, including zoom lenses and inner focusing systems;
— optical path definition, including ray-path sequence and optical surface arrangement;
— optical assemblies, including cemented parts and dynamic parts;
— mathematical description of the optical surface form;
— description of diffractive surfaces;
— machining process designation, such as polishing, molding or replicating;
— optical material specifications, such as material names, lot numbers and measured refractive indices;
— optical tolerances for the shape and material property of each optical part;
— assembly tolerances, such as separation, parallelism, displacement and tilt.
— effective diameters, coatings and protective surface treatment;
— paraxial evaluation, such as focal length, back focal length, principal points and f-number;
— ray-tracing evaluation, such as geometrical ray-tracing results (i.e. ray directions and intersection points
on each surface and optical path lengths), aberrations and wavefront aberration;
— OTF evaluation based on geometrical and/or physical optics;
— illuminance distribution on a detection surface or a projection surface;
— spectral characteristics;
— ghost image evaluation;
— thermal analysis accompanying optical surface deformation and material property value change;
— stress analysis accompanying optical surface deformation and material property value change;
— veiling glare and surface imperfections.
The following are outside the scope of this part of ISO 25297:
— mechanical design, electronic design and embedded software design;
— optical systems in which the optical path is changeable, e.g. beam splitters or variable magnification converters;
— tolerances for mechanical parts;
— parts with a diameter less than 10 times the wavelength of light;
— parts made from materials whose dielectric constant, σ, electric permittivity, ε, and magnetic permittivity,
μ, are uninfluenced by interaction between the materials and the light;
— graphical documents resulting from design, evaluation and analysis of products;
— optical wave guide for optical communications;
— product planning information concerning market research and customer analysis;
— product definition and configuration control information irrelevant to design, evaluation and analysis;
— analysis information, except thermal and stress analysis, e.g. vibration analysis;
— information on trial production, production process including production planning and production control,
and processes after production, such as shipment and repair;
— ophthalmic optics.
|
Published |
2012-03 |
Edition : 2 |
Number of pages : 77 |
Technical Committee |
37.020
Optical equipment
|
| ISO 25297-2:2011 |
Optics and photonics — Electronic exchange of optical data — Part 2: Mapping to the classes and properties defined in ISO 23584 |
ISO 25297-2:2011 specifies the relationship between the terms used in ISO 25297-1 and the properties defined in ISO 23584-2 and provides the means to facilitate the use of both standards.
|
Published |
2011-12 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
37.020
Optical equipment
|
| ISO 29301:2010 |
Microbeam analysis — Analytical transmission electron microscopy — Methods for calibrating image magnification by using reference materials having periodic structures |
ISO 29301:2010 specifies a calibration procedure applicable to images recorded over a wide magnification range in a transmission electron microscope (TEM). The reference materials used for calibration possess a periodic structure, such as a diffraction grating replica, a super-lattice structure of semiconductor or an analysing crystal for X-ray analysis, and a crystal lattice image of carbon, gold or silicon. ISO 29301:2010 is applicable to the magnification of the TEM image recorded on a photographic film, or an imaging plate, or detected by an image sensor built into a digital camera. ISO 29301:2010 also refers to the calibration of a scale bar. ISO 29301:2010 does not apply to the dedicated critical dimension measurement TEM (CD-TEM) and the scanning transmission electron microscope (STEM)
|
Withdrawn |
2010-06 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
37.020
Optical equipment
|
| ISO 29301:2017 |
Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures |
ISO 29301:2017 specifies a calibration procedure applicable to images recorded over a wide magnification range in a transmission electron microscope (TEM). The reference materials used for calibration possess a periodic structure, such as a diffraction grating replica, a super-lattice structure of semiconductor or an analysing crystal for X-ray analysis, and a crystal lattice image of carbon, gold or silicon. This document is applicable to the magnification of the TEM image recorded on a photographic film, or an imaging plate, or detected by an image sensor built into a digital camera. This document also refers to the calibration of a scale bar. This document does not apply to the dedicated critical dimension measurement TEM (CD-TEM) and the scanning transmission electron microscope (STEM).
|
Published |
2017-12 |
Edition : 2 |
Number of pages : 44 |
Technical Committee |
37.020
Optical equipment
|
| ISO/CD 5868 |
Ophthalmic optics and instruments — Anomaloscopes for the diagnosis of red-green colour vision deficiencies |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO/CD TS 6838 |
Ophthalmic optics — Contact lenses — Tolerances and methods for measurement of multifocal contact lens addition power |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO/DIS 7921 |
Ophthalmic optics and instruments — Near vision charts |
This International Standard applies to displays of high-contrast text that are designed for general near vision assessment. It does not apply to measurement systems designed for specialized testing of near visual acuity, e.g., low vision or low contrast charts or those intended for transillumination, or electronically generated systems.
|
Under development |
|
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 7998:1984 |
Optics and optical instruments — Spectacle frames — Vocabulary and lists of equivalent terms |
Spectrales frames and parts thereof are procedured in large numbers worldwide. In order to facilitate mutual understanding and avoid the use of inappropriate or incorrect terms, the standard defines terms relating to frames for spectacles and eyeglasses in English and French, and lists equivalent terms in (British and American) English, French, Russian, German, Italian and spanish. It does not include terms for measuring systems, formers and edging machines, and it does not apply to goggles.
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO 7998:2005 |
Ophthalmic optics — Spectacle frames — Lists of equivalent terms and vocabulary |
ISO 7998:2005 defines commonly used terms relating to frames for spectacles and eyeglasses and lists equivalent terms in English, French, Russian, German, Italian, Spanish, American English, Japanese (with phonetic transcription) and Chinese for parts of such frames.
|
Published |
2005-10 |
Edition : 2 |
Number of pages : 28 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO 8320-1:2003 |
Contact lenses and contact lens care products — Vocabulary — Part 1: Contact lenses |
ISO 8320-1:2003 identifies and defines terms applicable to the physical, chemical and optical properties of contact lenses, their manufacture and uses. It provides a vocabulary of terms that have been used in the text of other International Standards that were developed for or are applicable to contact lenses.
|
Withdrawn |
2003-06 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO 8320-2:2001 |
Contact lenses and contact lens care products — Vocabulary — Part 2: Contact lens care products |
|
Withdrawn |
2001-04 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO 8320:1986 |
Optics and optical instruments — Contact lenses — Vocabulary and symbols |
|
Withdrawn |
1986-09 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO 8321-1:1991 |
Optics and optical instruments — Contact lenses — Part 1: Specification for rigid corneal and scleral contact lenses |
Specifies requirements for contact lenses as supplied by a manufacturer according to a prescription from a practitioner. Does not apply to soft contact lenses in a dry state. Annexes A and B are for information only.
|
Withdrawn |
1991-08 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8321-1:2002 |
Ophthalmic optics — Specifications for material, optical and dimensional properties of contact lenses — Part 1: Rigid corneal and scleral contact lenses |
This part of ISO 8321 specifies requirements for rigid corneal and scleral contact lenses including tolerance limits for material, optical and dimensional properties.
A method for presenting the specification of contact lenses is described in annex A.
|
Withdrawn |
2002-09 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8596:1994 |
Ophthalmic optics — Visual acuity testing — Standard optotype and its presentation |
Specifies a range of Landolt ring optotypes and describes a method for measuring distance visual acuity under daylight conditions for the purposes of certification or licensing.
|
Withdrawn |
1994-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8596:2009 |
Ophthalmic optics — Visual acuity testing — Standard optotype and its presentation |
ISO 8596:2009 specifies a range of Landolt ring optotypes and describes a method for measuring distance visual acuity under daylight conditions for the purposes of certification or licensing.
It is neither intended as a standard for clinical measurements nor for the certification of blindness or partial sight.
|
Withdrawn |
2009-07 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8596:2017 |
Ophthalmic optics — Visual acuity testing — Standard and clinical optotypes and their presentation |
ISO 8596:2017 specifies a range of Landolt ring optotypes and describes a method for measuring distance visual acuity under photopic conditions for the purposes of certification or licensing.
ISO 8596:2017 is neither intended as a standard for clinical measurements nor for the certification of blindness or partial sight.
Other optotypes used for clinical investigations are described in Annex A for information.
|
Published |
2017-11 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8596:2017/Amd 1:2019 |
Ophthalmic optics — Visual acuity testing — Standard and clinical optotypes and their presentation — Amendment 1 |
|
Published |
2019-11 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8597:1994 |
Optics and optical instruments — Visual acuity testing — Method of correlating optotypes |
Lays down a method of correlation between a given set of optotypes and the standard optotype (Landolt ring) specified by ISO 8596.
|
Withdrawn |
1994-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8597:1994/Cor 1:1995 |
Optics and optical instruments — Visual acuity testing — Method of correlating optotypes — Technical Corrigendum 1 |
Corrigendum relates to the test area. Specifies the luminance of the surrounding field.
|
Withdrawn |
1995-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8598-1:2014 |
Optics and optical instruments — Focimeters — Part 1: General purpose instruments |
ISO 8598-1:2014 specifies requirements and test methods for general purpose focimeters designed for the measurement of vertex powers, cylinder axis, prismatic power and prism base setting within a restricted area at a specified location of a lens. This excludes instruments that can only measure the whole lens at once.
It is applicable to instruments typically intended for use by the ophthalmic community, with the capability to demonstrate conformity of spectacle lens products with the International Standards existing for these lenses.
|
Published |
2014-09 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8598:1996 |
Optics and optical instruments — Focimeters |
|
Withdrawn |
1996-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8598:1996/Cor 1:1998 |
Optics and optical instruments — Focimeters — Technical Corrigendum 1 |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8599:1994 |
Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance |
Specifies a method for determining the spectral transmittance and the luminous transmittance of contact lenses.
|
Withdrawn |
1994-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8612:2001 |
Ophthalmic instruments — Tonometers |
|
Withdrawn |
2001-04 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO/TR 8612:1997 |
Ophthalmic optics and instruments — Tonometers |
|
Withdrawn |
1997-06 |
Edition : 1 |
Number of pages : 45 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8612:2009 |
Ophthalmic instruments — Tonometers |
ISO 8612:2009, together with ISO 15004-1, specifies minimum requirements and the design compliance procedure for tonometers intended for routine clinical use in the estimation of intraocular pressure (IOP).
ISO 8612:2009 takes precedence over ISO 15004-1, if differences exist.
|
Published |
2009-10 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11981:1999/Cor 1:2005 |
Ophthalmic optics — Contact lenses and contact lens care products — Determination of physical compatibility of contact lens care products with contact lenses — Technical Corrigendum 1 |
|
Withdrawn |
2005-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8624:1991 |
Optics and optical instruments — Ophthalmic optics — Measuring system for spectacle frames |
Specifies a measuring system based on the boxing-system which uses a rectangle as the basis for the determination of dimensions. Figure 1 shows a diagrammatic presentation of the measuring system.
|
Withdrawn |
1991-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8624:2002 |
Ophthalmic optics — Spectacle frames — Measuring system and terminology |
|
Withdrawn |
2002-03 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8624:2011 |
Ophthalmic optics — Spectacle frames — Measuring system and terminology |
ISO 8624:2011 specifies a measuring system for spectacle frames and related terminology. It is applicable to fronts which are intended to be symmetrical.
|
Withdrawn |
2011-02 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8624:2011/Amd 1:2015 |
Ophthalmic optics — Spectacle frames — Measuring system and terminology — Amendment 1 |
|
Withdrawn |
2015-08 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8624:2020 |
Ophthalmic optics — Spectacle frames — Measuring system and vocabulary |
This document specifies a measuring system for spectacle frames and related vocabulary. It is applicable to spectacle frames with fronts that are intended to be symmetrical.
|
Published |
2020-06 |
Edition : 4 |
Number of pages : 16 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-1:1992 |
Ophthalmic optics — Finished single-vision corrective lenses — Part 1: General requirements |
|
Withdrawn |
1992-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-1:1996 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses |
Gives requirements for the optical and geometrical properties for uncut finished single-vision and multifocal spectacle lenses.
|
Withdrawn |
1996-01 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-1:2004 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses |
ISO 8980-1:2004 specifies requirements for the optical and geometrical properties for uncut finished single-vision and multifocal spectacle lenses.
|
Withdrawn |
2004-02 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-1:2004/Cor 1:2006 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses — Technical Corrigendum 1 |
|
Withdrawn |
2006-08 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-1:2017 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses |
ISO 8980-1:2017 specifies requirements and verification methods for the optical and geometrical properties for uncut finished single-vision and multifocal spectacle lenses.
|
Published |
2017-07 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-2:1996 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses |
Gives requirements for the optical and geometrical properties for uncut finished progressive power spectacle lenses.
|
Withdrawn |
1996-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-2:2004 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses |
ISO 8980-2:2004 specifies requirements for the optical and geometrical properties for uncut finished progressive spectacle lenses.
|
Withdrawn |
2004-02 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-2:2004/Cor 1:2006 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses — Technical Corrigendum 1 |
|
Withdrawn |
2006-08 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-2:2017 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for power-variation lenses |
ISO 8980-2:2017 specifies requirements and verification methods for the optical and geometrical properties for uncut finished power-variation lenses.
|
Published |
2017-07 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-3:1999 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods |
|
Withdrawn |
1999-06 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-3:2013 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods |
ISO 8980-1:2013 specifies requirements for the transmittance properties of uncut finished spectacle lenses and mounted pairs, including attenuation of solar radiation.
|
Withdrawn |
2013-10 |
Edition : 3 |
Number of pages : 31 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-3:2022 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods |
This document specifies requirements for the transmittance properties of uncut and unmounted finished spectacle lenses, including attenuation of solar radiation.
This document is not applicable to
— spectacle lenses having specific transmittance or absorption characteristics prescribed for medical reasons,
— products to which specific personal protective equipment transmittance standards apply, and
— products intended for direct observation of the sun, such as for solar-eclipse viewing.
NOTE 1 By reference to ISO 21987 and ISO 14889, this document also applies to lenses mounted in spectacles.
NOTE 2 Optical and geometric requirements are given for uncut finished spectacle lenses in ISO 8980‑1 and ISO 8980‑2, and for mounted lenses, in ISO 21987.
|
Published |
2022-06 |
Edition : 4 |
Number of pages : 34 |
Technical Committee |
11.040.70
Ophthalmic equipment
|