| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 8980-4:2000 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings |
|
Withdrawn |
2000-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-4:2006 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings |
ISO 8980-4:2006 specifies optical and non optical requirements, including durability, and test methods for anti-reflective coatings on spectacle lenses.
ISO 8980-4:2006 does not deal with the following topics:
transmittance and absorbtance;the colour of the reflected light.
|
Published |
2006-08 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 8980-5:2005 |
Ophthalmic optics — Uncut finished spectacle lenses — Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant |
ISO 8980-5:2005 specifies the requirement and test method for spectacle lens surfaces that are claimed to provide a basic level of abrasion resistance including those with coatings.
A lens claimed to be abrasion-resistant shall meet the requirements on both front and back surfaces.
Lens powers and surface form is restricted for testing, however test results are applicable to claims for lenses and lens surfaces with identical properties other than the lens power or surface radius.
ISO 8980-5:2005 does not attempt to define the properties of lens surfaces with abrasion resistance better than the following defined criteria.
|
Published |
2005-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9337-1:1999 |
Contact lenses — Determination of back vertex power — Part 1: Method using focimeter with manual focusing |
|
Withdrawn |
1999-05 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9337-2:2004 |
Contact lenses — Determination of back vertex power — Part 2: Measurement of contact lenses immersed in saline |
ISO 9337-2:2004 describes test methods for the determination of back vertex power of soft contact lenses immersed in saline. It is applicable to finished contact lenses.
|
Withdrawn |
2004-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9338:1996 |
Optics and optical instruments — Contact lenses — Determination of the diameters |
|
Withdrawn |
1996-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9339-1:1996 |
Optics and optical instruments — Contact lenses — Determination of the thickness — Part 1: Rigid contact lenses |
Specifies a method for the determination of the thickness of rigid contact lenses. For the purposes of this standard the definitions given in ISO 8320 apply.
|
Withdrawn |
1996-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9339-2:1998 |
Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses |
|
Withdrawn |
1998-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9339-2:1998/Cor 1:2000 |
Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses — Technical Corrigendum 1 |
|
Withdrawn |
2000-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9340:1996 |
Optics and optical instruments — Contact lenses — Determination of strains for rigid contact lenses |
Describes a procedure for determining the presence of strains in rigid contact lenses. For the purposes of this standard the definitions given in ISO 8320 apply.
|
Withdrawn |
1996-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9341:1996 |
Optics and optical instruments — Contact lenses — Determination of inclusions and surface imperfections for rigid contact lenses |
Describes a procedure for the assessment of inclusions and surface imperfections for rigid contact lenses. For the purposes of this standard the definitions given in ISO 8320 apply.
|
Withdrawn |
1996-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9342-1:2005 |
Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Test lenses for focimeters used for measuring spectacle lenses |
ISO 9342-1:2005 specifies requirements for test lenses for the calibration of focimeters that are used for the measurement of spectacle form lenses.
|
Published |
2005-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO/FDIS 9342-1 |
Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses |
|
Under development |
|
Edition : 2 |
Number of pages : 19 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9342-2:2005 |
Optics and optical instruments — Test lenses for calibration of focimeters — Part 2: Test lenses for focimeters used for measuring contact lenses |
ISO 9342-2:2005 specifies requirements for test lenses for focimeters that are used to measure contact lenses. These test lenses are used to find the precise correction values that are needed to convert the power values measured to back vertex power values.
ISO 9342-2:2005 applies to focimeters meeting the requirements of ISO 8598.
|
Published |
2005-11 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9342:1996 |
Optics and optical instruments — Test lenses for calibration of focimeters |
Specifies requirements for test lenses for the calibration of focimeters.
|
Withdrawn |
1996-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9363-1:1994 |
Optics and optical instruments — Contact lenses — Determination of cytotoxicity of contact lens material — Part 1: Agar overlay test and growth inhibition test |
Specifies two in vitro methods for determining the cytotoxicity of contact lens materials: the agar overlay test and the growth inhibition test. Primary purpose of these tests is to reveal the presence of leachable cytotoxic substances in or on contact lenses.
|
Withdrawn |
1994-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9394:1994 |
Optics and optical instruments — Determination of biological compatibility of contact lens material — Testing of the contact lens system by ocular study with rabbit eyes |
|
Withdrawn |
1994-11 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9394:1998 |
Ophthalmic optics — Contact lenses and contact lens care products — Determination of biocompatibility by ocular study using rabbit eyes |
|
Withdrawn |
1998-08 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9394:2012 |
Ophthalmic optics — Contact lenses and contact lens care products — Determination of biocompatibility by ocular study with rabbit eyes |
ISO 9394:2012 specifies an in vivo method of test to assess the ocular safety of both novel contact lens material and contact lens care products. The test assesses the degree of irritation to the ocular tissue produced by the device under test. The test method is described in application to rabbit eyes.
|
Published |
2012-10 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9456:1991 |
Optics and optical instruments — Ophthalmic optics — Marking of spectacle frames |
Specifies the information to be marked and its location. Gives recommendations for further information in documentation accompanying the frames or available separately. Annex A is for information only.
|
Withdrawn |
1991-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9801:1997 |
Ophthalmic instruments — Trial case lenses |
|
Withdrawn |
1997-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9801:2009 |
Ophthalmic instruments — Trial case lenses |
ISO 9801:2009 specifies requirements for mounted ophthalmic full and/or reduced aperture trial case lenses for the determination of the refractive error of the eye.
ISO 9801:2009 takes priority over ISO 15004-1, if differences exist.
|
Published |
2009-12 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9913-1:1996 |
Optics and optical instruments — Contact lenses — Part 1: Determination of oxygen permeability and transmissibility with the FATT method |
Describes a polarographic method for the determination of oxygen permeability and oxygen transmissibility of contact lenses. Specifies the procedures for making the measurements and establishes the conditions for the measurements.
|
Withdrawn |
1996-11 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 9914:1995 |
Optics and optical instruments — Contact lenses — Determination of refractive index of contact lens materials |
Gives a reference test method for determining the refractive index of contact lens materials. Alternative methods may be used provided that repeatability and accuracy are at least equal to those specified herein.
|
Withdrawn |
1995-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-1:1991 |
Ophthalmic optics — Semi-finished lens blanks — Part 1: Specifications for single-vision and multifocal lens blanks |
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-1:1991/Cor 1:1992 |
Ophthalmic optics — Semi-finished lens blanks — Part 1: Specifications for single-vision and multifocal lens blanks — Technical Corrigendum 1 |
|
Withdrawn |
1992-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-1:1996 |
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 1: Specifications for single-vision and multifocal lens blanks |
Specifies requirements for the optical and geometrical properties of semi-finished single-vision and multifocal lens blanks.
|
Withdrawn |
1996-01 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-1:2006 |
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 1: Specifications for single-vision and multifocal lens blanks |
ISO 10322-1:2006 specifies requirements for the optical and geometrical properties of semi-finished single-vision and multifocal spectacle lens blanks.
|
Withdrawn |
2006-02 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-1:2016 |
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 1: Specifications for single-vision and multifocal lens blanks |
ISO 10322-1:2016 specifies requirements for the optical and geometrical properties of all semi-finished single-vision and multifocal spectacle lens blanks.
|
Published |
2016-03 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-2:1991 |
Ophthalmic optics — Semi-finished lens blanks — Part 2: Specifications for progressive power lens blanks |
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-2:1996 |
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 2: Specifications for progressive power lens blanks |
Specifies requirements for the optical and geometrical properties of semi-finished progressive power lens blanks.
|
Withdrawn |
1996-01 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-2:2006 |
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 2: Specifications for progressive power lens blanks |
ISO 10322-2:2006 specifies requirements for the optical and geometrical properties of semi-finished progressive power spectacle lens blanks.
|
Withdrawn |
2006-02 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10322-2:2016 |
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 2: Specifications for progressive-power and degressive-power lens blanks |
ISO 10322-2:2016 specifies requirements for the optical and geometrical properties of semi-finished lens blanks with finished progressive-power and degressive-power surfaces.
|
Published |
2016-03 |
Edition : 4 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10338:1996 |
Optics and optical instruments — Contact lenses — Determination of curvature |
|
Withdrawn |
1996-07 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10339:1997 |
Ophthalmic optics — Contact lenses — Determination of water content of hydrogel lenses |
|
Withdrawn |
1997-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10340:1995 |
Optics and optical instruments — Contact lenses — Method for determining the extractable substances |
Specifies an analytical method for the quantitative determination of the substances extractable from contact lenses by Soxhlet extraction with different solvents.
|
Withdrawn |
1995-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10341:1997 |
Ophthalmic instruments — Refractor heads |
|
Withdrawn |
1997-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 12867:1998 |
Ophthalmic instruments — Trial frames |
|
Withdrawn |
1998-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10341:2009 |
Ophthalmic instruments — Refractor heads |
ISO 10341:2009 specifies requirements and test methods for refractor heads used for the determination of refractive errors and binocular functions of the human eye. It takes priority over ISO 15004-1, if differences exist.
|
Withdrawn |
2009-07 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10341:2012 |
Ophthalmic instruments — Refractor heads |
ISO 10341:2012 specifies requirements and test methods for refractor heads used for the determination of refractive errors and binocular functions of the human eye.
|
Published |
2012-12 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10342:1997 |
Ophthalmic instruments — Eye refractometers |
|
Withdrawn |
1997-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10342:2003 |
Ophthalmic instruments — Eye refractometers |
ISO 10342:2003, together with ISO 15004, specifies requirements and test methods for eye refractometers using an objective measuring principle.
|
Withdrawn |
2003-05 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10342:2010 |
Ophthalmic instruments — Eye refractometers |
ISO 10342:2010 together with ISO 15004‑1, specifies requirements and test methods for eye refractometers using an objective measuring principle. It is limited to the measurement of spherocylindrical refractive error.
ISO 10342:2010 takes precedence over ISO 15004‑1, if differences exist.
|
Published |
2010-06 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10343:1997 |
Ophthalmic instruments — Ophthalmometers |
|
Withdrawn |
1997-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10343:2009 |
Ophthalmic instruments — Ophthalmometers |
ISO 10343:2009, together with ISO 15004-1, specifies requirements and test methods for continuously or digitally indicating ophthalmometers. Certain types of ophthalmometer are capable of measuring radii of curvature of contact lenses as described in ISO 18369-3:2006, 4.1. It is assumed that the local corneal front surface and both contact lens surfaces are spherical or toroidal.
ISO 10343:2009 takes priority over ISO 15004-1, if differences exist.
|
Withdrawn |
2009-07 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10343:2014 |
Ophthalmic instruments — Ophthalmometers |
ISO 10343:2014 specifies requirements and test methods for continuously or digitally indicating ophthalmometers. Certain types of ophthalmometer have sufficient resolution and range to adequately measure the radii of curvature of contact lenses. It is assumed that the local corneal front surface and both contact lens surfaces are spherical or toroidal.
|
Published |
2014-07 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10344:1996 |
Optics and optical instruments — Contact lenses — Saline solution for contact lens testing |
Specifies a saline solution for use when conducting standardized tests to determine dimensions, physical, chemical and biological characteristics of contact lenses and contact lens materials. The solution is not intended for the purpose of packaging finished contact lenses.
|
Withdrawn |
1996-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10685-1:2011 |
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 1: Product identification and electronic catalogue product hierarchy |
ISO 10685-1:2011 establishes rules and requirements for the definition of a unique identifier for spectacle frames and sunglass frames, and specifies the data information and file format used for identifying spectacle frames and sunglass frames.
It is applicable to sunglass clip-ons.
|
Published |
2011-12 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10685-2:2012 |
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2: Commercial information |
ISO 10685-2:2012 specifies the commercial information and file format used for trading spectacle frames and sunglasses. It includes sunglass clip-ons.
|
Withdrawn |
2012-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10685-2:2016 |
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2: Commercial information |
ISO 10685-2:2016 specifies the commercial information and file format used for trading spectacle frames and sunglasses.
ISO 10685-2:2016 includes sunglass clip-ons.
|
Published |
2016-03 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10685-3:2012 |
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 3: Technical information |
|
Published |
2012-11 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10938:2016 |
Ophthalmic optics — Chart displays for visual acuity measurement — Printed, projected and electronic |
ISO 10938:2016 applies to displays of optotypes generated by chart projectors and all other visual acuity measurement systems that use recognition of high-contrast optotypes and that are designed for general use, including optotypes printed on media (either opaque or intended for transillumination), those generated electronically, and those produced by optical projection.
|
Published |
2016-10 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10939:1998 |
Ophthalmic instruments — Slit-lamp microscopes |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10939:1998/Cor 1:2000 |
Ophthalmic instruments — Slit-lamp microscopes — Technical Corrigendum 1 |
|
Withdrawn |
2000-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10939:2007 |
Ophthalmic instruments — Slit-lamp microscopes |
ISO 10939:2007, together with ISO 15004-1 and ISO 15004-2, specifies requirements and test methods for slit-lamp microscopes to provide slit illumination and observation under magnification of the eye and its adnexa.
ISO 10939:2007 is not applicable to microscope accessories, e.g. photographic equipment and lasers.
ISO 10939:2007 takes precedence over ISO 15004-1 and ISO 15004-2, if differences exist.
|
Withdrawn |
2007-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10939:2017 |
Ophthalmic instruments — Slit-lamp microscopes |
ISO 10939:2017, together with ISO 15004‑1 and ISO 15004‑2, specifies requirements and test methods for slit-lamp microscopes to provide slit illumination and observation under magnification of the eye and its adnexa.
ISO 10939:2017 is not applicable to microscope accessories, e.g. photographic equipment and lasers.
ISO 10939:2017 takes precedence over ISO 15004‑1 and ISO 15004‑2, if differences exist.
|
Published |
2017-05 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10940:1998 |
Ophthalmic instruments — Fundus cameras |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10940:2009 |
Ophthalmic instruments — Fundus cameras |
ISO 10940:2009, together with ISO 15004-1 and ISO 15004-2, specifies requirements and test methods for fundus cameras operating for observing, photographing or recording electronic images of the fundus of the human eye in order to provide the image information for diagnosis.
ISO 10940:2009 takes precedence over ISO 15004-1 and ISO 15004-2, if differences exist.
|
Published |
2009-08 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10942:1998 |
Ophthalmic instruments — Direct ophthalmoscopes |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10942:1998/Cor 1:1998 |
Ophthalmic instruments — Direct ophthalmoscopes — Technical Corrigendum 1 |
|
Withdrawn |
1998-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10942:2006 |
Ophthalmic instruments — Direct ophthalmoscopes |
ISO 10942:2006, together with ISO 15004-1 and ISO 15004-2, specifies minimum requirements and test methods for hand-held direct ophthalmoscopes designed for directly observing the eye fundus.
ISO 10942:2006 takes precedence over ISO 15004-1 and ISO 15004-2, if differences exist.
|
Withdrawn |
2006-06 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10942:2022 |
Ophthalmic instruments — Direct ophthalmoscopes |
This document, together with ISO 15004-1 and ISO 15004-2, specifies minimum requirements and test methods for hand-held direct ophthalmoscopes designed for directly observing the eye fundus.
This document takes precedence over ISO 15004-1 and ISO 15004-2, if differences exist.
|
Published |
2022-01 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10943:1998 |
Ophthalmic instruments — Indirect ophthalmoscopes |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10943:2006 |
Ophthalmic instruments — Indirect ophthalmoscopes |
ISO 10943:2006, together with ISO 15004-1 and ISO 15004-2 specifies minimum requirements and test methods for hand-held, spectacle-type, and head-worn indirect ophthalmoscopes for observing indirect images of the eye fundus.
ISO 10943:2006 takes precedence over ISO 15004-1 and ISO 15004-2, if differences exist.
ISO 10943:2006 is not applicable to condensing lenses used for indirect ophthalmoscopy or to accessories.
ISO 10943:2006 is not applicable to table-mounted instruments such as Gullstrand ophthalmoscopes and their derivatives, nor to ophthalmoscopes primarily intended for image capture and/or processing such as those based on scanning laser techniques.
|
Withdrawn |
2006-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10943:2011 |
Ophthalmic instruments — Indirect ophthalmoscopes |
ISO 10943:2011 specifies minimum requirements and test methods for hand-held, spectacle-type, and head-worn indirect ophthalmoscopes for observing indirect images of the eye fundus.
ISO 10943:2011 is not applicable to condensing lenses used for indirect ophthalmoscopy or to accessories.
ISO 10943:2011 is not applicable to table-mounted instruments such as Gullstrand ophthalmoscopes and their derivatives, nor to ophthalmoscopes primarily intended for image capture and/or processing such as those based on scanning laser techniques.
|
Withdrawn |
2011-08 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10943:2023 |
Ophthalmic instruments — Indirect ophthalmoscopes |
This document, together with ISO 15004-1 and ISO 15004-2, specifies minimum requirements and test methods for hand-held, spectacle-type, and head-worn indirect ophthalmoscopes for observing indirect images of the eye fundus.
This document takes precedence over ISO 15004-1 and ISO 15004-2, if differences exist.
This document is not applicable to condensing lenses used for indirect ophthalmoscopy or to accessories.
This document is not applicable to table-mounted instruments such as Gullstrand ophthalmoscopes and their derivatives, nor to ophthalmoscopes primarily intended for image capture and/or processing such as those based on scanning laser techniques.
|
Published |
2023-01 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10944:1998 |
Ophthalmic instruments — Synoptophores |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 10944:2009 |
Ophthalmic instruments — Synoptophores |
ISO 10944:2009, together with ISO 15004-1, specifies minimum requirements and test methods for synoptophores (also called major amblyoscopes or synoptometers) used to test, measure, train and develop the patient's binocular vision and to measure horizontal, vertical and cyclo deviation in different positions of gaze.
ISO 10944:2009 takes precedence over ISO 15004-1, if differences exist.
|
Published |
2009-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11380:1994 |
Optics and optical instruments — Ophthalmic optics — Formers |
Specifies the characteristics of formers which are used in edging machines to edge lenses designed for insertion into spectacle frames. Not applicable to separate formers required for supplementary treatment of lenses, for example facetting.
|
Published |
1994-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11381:1994 |
Optics and optical instruments — Ophthalmic optics — Screw threads |
Specifies requirements for ISO metric screw threads for use with spectacle frames. Provision is made for screw threads of the following nominal sizes: S0,8 × 0,2, M1,0 × 0,25, M1,2 × 0,25, M1,4 × 0,3, M1,6 × 0,35 and M2,0 × 0,4, and for related taps and gauges (in accordance with ISO 529 and ISO 1502).
|
Withdrawn |
1994-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11381:2016 |
Ophthalmic optics — Spectacle frames — Screw threads |
ISO 11381:2016 specifies requirements for ISO metric screw threads for use with spectacle frames. Provision is made for screw threads of the following nominal sizes: S0,8 × 0,2; M1,0 × 0,25; M1,2 × 0,25; M1,4 × 0,3; M1,6 × 0,35 and M2,0 × 0,4 and for related taps and gauges.
|
Published |
2016-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11539:1999 |
Ophthalmic optics — Contact lenses — Classification of contact lenses and contact lens materials |
|
Withdrawn |
1999-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11715-1:1998 |
Ophthalmic optics — Format of digital data files for data transfer for profiling of spectacle lenses — Part 1: Two-dimensional tracers |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11978:2000 |
Ophthalmic optics — Contact lenses and contact lens care products — Information supplied by the manufacturer |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11978:2014 |
Ophthalmic optics — Contact lenses and contact lens care products — Labelling |
ISO 11978:2014 specifies the information to be provided by the manufacturer of contact lenses and contact lens care products to ensure the correct and safe use of these devices and their accessories by both types of users of contact lenses: the eye care professional and the contact lens wearer.
|
Withdrawn |
2014-10 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11978:2017 |
Ophthalmic optics — Contact lenses and contact lens care products — Labelling |
ISO 11978:2017 specifies the information to be provided by the manufacturer of contact lenses and contact lens care products to ensure the correct and safe use of these devices and their accessories by both types of user of contact lenses: the eye care professional and the contact lens wearer.
ISO 11978:2017 does not specify the format in which such information shall be provided.
|
Published |
2017-08 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-1:2006 |
Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary |
ISO 11979-1:2006 defines terms applicable to intraocular lenses and to the methods used to evaluate them.
|
Withdrawn |
2006-07 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO 11979-1:2012 |
Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary |
|
Withdrawn |
2012-09 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO 11979-1:2018 |
Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary |
This document defines terms applicable to intraocular lenses, and to the methods used to evaluate them.
NOTE Terms are listed in the alphabetical order of the English terms in the English version of this document.
|
Published |
2018-11 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO/WD 11979-1 |
Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary |
|
Under development |
|
Edition : 5 |
|
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.040.70
Ophthalmic equipment
|
| ISO 11979-2:1999 |
Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-2:1999/Cor 1:2003 |
Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods — Technical Corrigendum 1 |
|
Withdrawn |
2003-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-2:2014 |
Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods |
ISO 11979-2:2014 specifies requirements and test methods for certain optical properties of intraocular lenses (IOLs) with any of spherical, aspheric, monofocal, toric, multifocal, and/or accommodative optics. The generic descriptor ?IOL' used throughout ISO 11979-2:2014 also includes phakic intraocular lenses (PIOL).
|
Published |
2014-08 |
Edition : 2 |
Number of pages : 22 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO/CD 11979-2 |
Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods |
|
Deleted |
|
Edition : 3 |
|
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO/CD 11979-2 |
Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods |
ISO 11979-2:2014 specifies requirements and test methods for certain optical properties of intraocular lenses (IOLs) with any of spherical, aspheric, monofocal, toric, multifocal, and/or accommodative optics. The generic descriptor ?IOL' used throughout ISO 11979-2:2014 also includes phakic intraocular lenses (PIOL).
|
Under development |
|
Edition : 3 |
|
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-3:1999 |
Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-3:2006 |
Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods |
ISO 11979-3:2006 specifies requirements and test methods for certain mechanical properties of intraocular lenses (IOLs).
It is applicable to all types of IOLs intended for implantation in the anterior segment of the human eye, excluding corneal implants, provided that the test method is appropriate to the particular IOL design.
|
Withdrawn |
2006-05 |
Edition : 2 |
Number of pages : 30 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-3:2012 |
Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods |
|
Published |
2012-12 |
Edition : 3 |
Number of pages : 31 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-4:2000 |
Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information |
|
Withdrawn |
2000-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-4:2008 |
Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information |
ISO 11979-4:2008 specifies the labelling requirements for intraocular lenses (IOLs) and the information to be provided within or on the packaging.
|
Published |
2008-12 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-4:2008/Amd 1:2012 |
Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information — Amendment 1 |
|
Published |
2012-10 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-5:2006 |
Ophthalmic implants — Intraocular lenses — Part 5: Biocompatibility |
ISO 11979-5:2006 specifies particular requirements for the biocompatibility evaluation of materials for intraocular lenses (IOLs) including the processing conditions to produce them. These requirements include evaluation of physicochemical properties that are relevant to biocompatibility. It also gives guidance on conducting an ocular implantation test.
|
Withdrawn |
2006-06 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-5:2020 |
Ophthalmic implants — Intraocular lenses — Part 5: Biocompatibility |
This document specifies particular requirements for the biocompatibility evaluation of materials for intraocular lenses (IOLs) including the processing conditions to produce them. These requirements include evaluation of physicochemical properties that are relevant to biocompatibility. It also gives guidance on conducting an ocular implantation test.
|
Published |
2020-09 |
Edition : 3 |
Number of pages : 27 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-6:2002 |
Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability |
This part of ISO 11979 describes tests by which the shelf-life of sterile intraocular lenses (IOLs) in their final packaging can be determined. These tests include procedures to establish the stability of IOLs in distribution and storage.
|
Withdrawn |
2002-06 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-6:2007 |
Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability |
ISO 11979-6:2007 specifies tests by which the shelf-life of sterile intraocular lenses (IOLs) in their final packaging can be determined. These tests include procedures to establish the stability of IOLs in distribution and storage.
|
Withdrawn |
2007-07 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-6:2014 |
Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability testing |
ISO 11979-6:2014 specifies tests by which the shelf-life of sterile intraocular lenses (IOLs) in their final packaging can be determined. These tests include procedures to establish the stability of IOLs in distribution and storage.
|
Published |
2014-10 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-7:2001 |
Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations |
|
Withdrawn |
2001-04 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-7:2006 |
Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations |
ISO 11979-7:2006 specifies particular requirements for clinical investigations for posterior and anterior chamber monofocal intraocular lenses (IOLs) for the correction of aphakia.
|
Withdrawn |
2006-05 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-7:2006/Amd 1:2012 |
Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations — Amendment 1 |
|
Withdrawn |
2012-01 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
11.040.70
Ophthalmic equipment
|
| ISO 11979-7:2014 |
Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations |
ISO 11979-7:2014 specifies particular requirements for clinical investigations for posterior and anterior chamber intraocular lenses (IOLs).
|
Withdrawn |
2014-09 |
Edition : 3 |
Number of pages : 41 |
Technical Committee |
11.040.70
Ophthalmic equipment
|