| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4210:1996 |
Cycles — Safety requirements for bicycles |
Specifies safety and performance requirements for the design, assembly and testing of bicycles. Contains guidelines for instructions on the use and care of bicycles. Does not apply to special types of bicycles such as tandems, toy bicycles etc..
|
Withdrawn |
1996-11 |
Edition : 4 |
Number of pages : 44 |
Technical Committee |
43.150
Cycles
|
| ISO 5775-2:1989 |
Bicycle tyres and rims — Part 2: Rims |
|
Withdrawn |
1989-06 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
43.150
Cycles
|
| ISO 5775-2:1996 |
Bicycle tyres and rims — Part 2: Rims |
Specifies rim dimensions for bicycle tyres; gives only those rim contour dimensions necessary for tyre mounting and to fit the tyre on the rim.
|
Withdrawn |
1996-11 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
43.150
Cycles
|
| ISO 5775-2:1996/Amd 1:2001 |
Bicycle tyres and rims — Part 2: Rims — Amendment 1 |
|
Withdrawn |
2001-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
|
| ISO 5775-2:2015 |
Bicycle tyres and rims — Part 2: Rims |
ISO 5775-2:2015 specifies rim dimensions for bicycle tyres: it gives only those rim contour dimensions necessary for tyre mounting and to fit the tyre on the rim.
ISO 5775‑1 covers designations and dimensions for tyres.
ISO 5775‑2 covers straight side (SS) rims, hooked bead type (HB) rims and crotchet type (C) rims.
|
Withdrawn |
2015-12 |
Edition : 3 |
Number of pages : 16 |
Technical Committee |
43.150
Cycles
|
| ISO 5775-2:2021 |
Bicycle tyres and rims — Part 2: Rims |
|
Published |
2021-03 |
Edition : 4 |
Number of pages : 17 |
Technical Committee |
43.150
Cycles
|
| ISO 6692:1981 |
Cycles — Marking of cycle components |
Specifies the marking system recommended to the manufacturer so as to reduce risks of incompatibility between components of bicycles produced according to new ISO Standards and traditional components. This problem of selection of the appropriate component will make itself felt above all at the level of the repair of bicycles and the distribution of spare parts; it will be necessary for this distinguishing mark to be universal, standardized and practical.
|
Published |
1981-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
|
| ISO 6693:1981 |
Cycles — Cotter pin and assembly of the axle/cotter pin/crank |
Specifies the dimensions and tolerances of the cotter pin and the assembly of the axle/cotter pin/crank. Applies to the fastening of the pedal on the pedal axle.
|
Withdrawn |
1981-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
43.150
Cycles
|
| ISO 6695:1991 |
Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions |
Gives the dimensions for the assembly of cranks on bottom bracket pedal axles with square end fittings. Dimensions for the assembly of cranks on bottom bracket pedal axles with square end fittings shall be as given in the figure and the table.
|
Withdrawn |
1991-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
|
| ISO 6695:2015 |
Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions |
ISO 6695:2015 specifies the dimensions for the assembly of cranks on bottom bracket spindles with square end fittings.
|
Published |
2015-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
|
| ISO 6696:1989 |
Cycles — Screw threads used in bottom bracket assemblies |
Specifies the thread profile and limits and tolerances for the screw threads used to assemble bottom bracket cups to bottom brackets on bicycles. It is based on the use of the ISO basic thread profile, satisfactory interchangeability with the corresponding B.S.C. thread, the use of screw thread tolerance grades and tolerance positions and the use of gauges made to ISO 1502.
|
Published |
1989-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
43.150
Cycles
|
| ISO 6697:1994 |
Cycles — Hubs and freewheels — Assembly dimensions |
Gives the main dimensions for hubs and freewheels, including single-speed coaster brake hubs and multispeed gear hubs, to ensure assembly and interchangeability.
|
Published |
1994-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
43.150
Cycles
|
| ISO 6698:1981 |
Cycles — Screw threads used to assemble freewheels on bicycle hubs |
|
Withdrawn |
1981-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
43.150
Cycles
|
| ISO 6698:1989 |
Cycles — Screw threads used to assemble freewheels on bicycle hubs |
Specifies the thread profile and limits and tolerances for the screw threads used to assemble freewheels on bicycle hubs. Based on the use of the ISO basic thread profile, satisfactory interchangeability with the corresponding B.S.C. thread, the use of screw thread tolerance grades and tolerance positions and the use of gauges made to ISO 1502.
|
Published |
1989-12 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
43.150
Cycles
|
| ISO 6699:1990 |
Cycles — Stem and handlebar bend — Assembly dimensions |
Gives the dimensions and tolerances to ensure secure assembly between the stem and the handlebar bend. Applies to bicycles intended for use on public roads, and on which the saddle can be adjusted to provide a saddle height of 635 mm or more. Does not apply to specialized types of bicycle such as trademen's delivery bicycles, tandems, toy bicycles and bicycles designed and equipped for use in sanctioned competitive events.
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
|
| ISO 6699:2016 |
Cycles — Handlebar centre and stem dimensions |
ISO 6699:2016 specifies the dimensions and tolerances to ensure secure assembly between the stem and the handlebar centre of a bicycle.
It is applicable for bicycles intended for use on public roads, and on which the saddle can be adjusted to provide a saddle height of 635 mm or more.
It is not applicable for specialized types of bicycle, such as tradesmen's delivery bicycles, tandems, toy bicycles and bicycles designed and equipped for use in sanctioned competitive events.
|
Published |
2016-08 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
|
| ISO 6701:1991 |
Cycles — External dimensions of spoke nipples |
Applies to round or flat head spoke nipples. Specifies external dimensions and their tolerances and the designation. Values are given for four wire diameters.
|
Published |
1991-01 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
|
| ISO 6742-1:1985 |
Cycles — Lighting and reflective devices — Photometric and physical requirements — Part 1: Lighting equipment |
|
Withdrawn |
1985-02 |
Edition : 1 |
|
Technical Committee |
43.150
Cycles
|
| ISO 6742-1:1987 |
Cycles — Lighting and retro-reflective devices — Photometric and physical requirements — Part 1: Lighting equipment |
This second edition cancels and replaces the first edition (ISO 6742-1 : 1985), incorporating draft Amendment ISO 6742-1/DAM 1 : 1985. Constitutes a revision of some clauses. Includes a new definition 4.12 and some new methodes, and marking requirements. Applies to lighting equipment for use on cycles intended to be used on public roads.
|
Withdrawn |
1987-09 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
43.150
Cycles
|
| ISO 8562:1990 |
Cycles — Stem wedge angle |
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
43.150
Cycles
|
| ISO 6742-1:2015 |
Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices |
ISO 6742-1:2015 is applicable to lighting devices used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.
ISO 6742-1:2015 specifies the functions, safety requirements, photometric performance and test methods of lighting and signalling devices that can be used on cycles.
|
Published |
2015-05 |
Edition : 3 |
Number of pages : 18 |
Technical Committee |
43.150
Cycles
|
| ISO/FDIS 6742-1 |
Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices |
|
Under development |
|
Edition : 4 |
|
Technical Committee |
43.150
Cycles
|
| ISO 6742-2:1984 |
Cycles — Lighting and retro-reflective devices — Photometric and physical requirements — Part 2: Retro-reflective devices |
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
43.150
Cycles
|
| ISO 6742-2:1985 |
Cycles — Lighting and retro-reflective devices — Photometric and physical requirements — Part 2: Retro-reflective devices |
This part of ISO 6742 specifies general requirements for retro-reflective devices for fitting to cycles intended to be used on public roads. Such retro-reflective devices are effective in conditions of poor visibility and at night in helping to make all road users aware of the presence of a cyclist.
|
Withdrawn |
1985-07 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
43.150
Cycles
|
| ISO 6742-2:2015 |
Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices |
ISO 6742-2:2015 is applicable to retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.
ISO 6742-2:2015 specifies photometric and physical requirements of retro-reflective devices.
|
Published |
2015-05 |
Edition : 3 |
Number of pages : 18 |
Technical Committee |
43.150
Cycles
|
| ISO 6742-2:2015/Amd 1:2018 |
Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices — Amendment 1 |
|
Published |
2018-04 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
43.150
Cycles
|
| ISO/FDIS 6742-2 |
Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices |
|
Under development |
|
Edition : 4 |
|
Technical Committee |
43.150
Cycles
|
| ISO 6742-3:2015 |
Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of lighting and retro-reflective devices |
ISO 6742-3:2015 is applicable to lighting and retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.
ISO 6742-3:2015 specifies the safety requirements and test methods of lighting and retro-reflective devices for fastening devices, control, (guidelines for maintenance), instructions for mounting and use.
|
Published |
2015-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
43.150
Cycles
|
| ISO/FDIS 6742-3 |
Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of lighting and retro-reflective devices |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
43.150
Cycles
|
| ISO 6742-4:2015 |
Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the cycle's movement |
ISO 6742-4:2015 is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.
ISO 6742-4:2015 specifies requirements and test methods for the performance of lighting systems powered by the cycle's movement. It applies to light devices complying with ISO 6742‑1. Lighting systems include lighting devices and power supplied by cycle's movement such as generator.
|
Published |
2015-05 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
43.150
Cycles
|
| ISO/FDIS 6742-4 |
Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the cycle's movement |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
43.150
Cycles
|
| ISO 6742-5:2015 |
Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the cycle's movement |
ISO 6742-5:2015 is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.
ISO 6742-5:2015 specifies requirements and test methods for the performance of lighting systems not powered by the cycle's movement. It applies to light devices complying with ISO 6742‑1. Lighting systems include lighting devices and power not supplied by cycle's movement such as battery.
|
Published |
2015-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
43.150
Cycles
|
| ISO/FDIS 6742-5 |
Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the cycle's movement |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
43.150
Cycles
|
| ISO 10191:1995/Amd 1:1998 |
Passenger car tyres — Verifying tyre capabilities — Laboratory test methods — Amendment 1 |
|
Withdrawn |
1998-09 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 7636:1984 |
Bells for bicycles and mopeds — Technical specifications |
Lays down the technical specifications, such as the sound pressure level and the durability, and specifies the corresponding test methods for bells which may be fitted to bicycles (category I) and certain categories of mopeds (category II). Describes the measuring apparatus, the test conditions, and the test procedure.
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
43.140
Motorcycles and mopeds
;
43.150
Cycles
|
| ISO 8090:1990 |
Cycles — Terminology |
Defines the terminology of bicycles in English and French. It also specifies the symbols to designate bicycle main dimensions.
|
Withdrawn |
1990-02 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
43.150
Cycles
;
01.040.43
Road vehicle engineering (Vocabularies)
|
| ISO 8090:2019 |
Cycles — Terminology |
This document defines a description of common terms and symbols used in the field of bicycles and two wheeled Electric Power Assisted Cycles (EPACs). The terms are classified under a nomenclature of different parts of bicycles and two wheeled EPACs, and presented in several languages.
|
Published |
2019-09 |
Edition : 2 |
Number of pages : 159 |
Technical Committee |
43.150
Cycles
;
01.040.43
Road vehicle engineering (Vocabularies)
|
| ISO 8098:1989 |
Cycles — Safety requirements for bicycles for young children |
Specifies for bicycles for young children safety and performance requirements concerning design, assembly and testing of bicycles and bicycles components. Gives guides for their use and maintenance. Applies to bicycles having a saddle height between 435 mm and 635 mm maximum, and a transmitted drive to the rear wheel. Applies to the specified bicycles whether having supporting wheels or not.
|
Withdrawn |
1989-09 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8098:1989/Amd 1:1992 |
Cycles — Safety requirements for bicycles for young children — Amendment 1 |
Replaces subclause 2.2.1.1, amends subclause 2.3.1, and adds new subclauses 2.6.4 (Wheel retention) and 2.6.5 (Quick-release axle mechanisms).
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8098:2002 |
Cycles — Safety requirements for bicycles for young children |
This International Standard specifies safety and performance requirements and test methods for the design, assembly and testing of bicycles for young children of from about four to eight years of age and these bicycles' sub-assemblies. It also provides guidelines for instructions on the use and care of the bicycles.
This International Standard is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm propelled by a transmitted drive to the rear wheel.
It is not applicable to special bicycles intended for stunting (e.g. BMX bicycles).
|
Withdrawn |
2002-08 |
Edition : 2 |
Number of pages : 27 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8098:2014 |
Cycles — Safety requirements for bicycles for young children |
ISO 8098:2014 specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. It also provides guidelines for instructions on the use and care of the bicycles.
ISO 8098:2014 is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm, propelled by a transmitted drive to the rear wheel.
ISO 8098:2014 is not applicable to special bicycles intended for performing stunts (e.g. BMX bicycles).
|
Withdrawn |
2014-06 |
Edition : 3 |
Number of pages : 43 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8098:2023 |
Cycles — Safety requirements for bicycles for young children |
This document specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. It also provides guidelines for instructions on the use and care of the bicycles.
This document is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm, propelled by a transmitted drive to the rear wheel.
It is not applicable to special bicycles intended for performing stunts (e.g. BMX bicycles).
NOTE For bicycles with a maximum saddle height of 435 mm or less, see national regulations for ride-on toys, and with a maximum saddle height of 635 mm or more, see ISO 4210-1 to ISO 4210-9.
|
Published |
2023-01 |
Edition : 4 |
Number of pages : 43 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8488:1986 |
Cycles — Screw threads used to assemble head fittings on bicycle forks |
Specifies details of the screw threads used to assemble heads, i.d. fittings, on bicycle fork steering columns. The basic thread profile is that of ISO 68; the tolerance grades and tolerance positions are in accordance with ISO 965-1; the gauging system is that specified in ISO 1502. These threads are interchangeable with the corresponding B.S.C. thread.
|
Published |
1986-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
43.150
Cycles
|
| ISO 8562:2022 |
Cycles — Stem wedge angle |
This document specifies the stem wedge angle intended to ensure a secure assembly between the handlebar stem and the fork stem.
NOTE The wedge angle has the same function as the angle of the expander cone.
|
Published |
2022-02 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
43.150
Cycles
|
| ISO 9633:1992 |
Cycle chains — Characteristics and test methods |
Specifies the dimensions and mechanical properties (minimum tensile strength, twist, lateral deviation, stiff link and side bow). Also describes test methods for determining these mechanical properties. The dimensions of chain wheels are specified in ISO 606. Annex A gives examples of calculation of the twist value.
|
Withdrawn |
1992-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
43.150
Cycles
|
| ISO 9633:2001 |
Cycle chains — Characteristics and test methods |
This International Standard specifies the dimensions and mechanical properties of cycle chains, as well as test
methods for determining these mechanical properties (i.e. twist, lateral deviation, stiff link and side bow).
NOTE The dimensions of sprockets for cycle chains are specified in ISO 606.
|
Published |
2001-07 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
43.150
Cycles
|
| ISO 10230:1990 |
Cycles — Splined hub and sprocket — Mating dimensions |
Specifies mating dimensions and tolerances for the sprocket and splines of the hub of an internally geared hub or a backpedal brake hub on a cycle. The dimensions and tolerances for the fitting shall be as given in figure 1.
|
Published |
1990-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
|
| ISO 11243:1994 |
Cycles — Luggage carriers for bicycles — Concepts, classification and testing |
Specifies dimensions and performance requirements for luggage carriers intended for mounting above the rear wheels of bicycles.
|
Withdrawn |
1994-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
43.150
Cycles
|
| ISO 11243:2016 |
Cycles — Luggage carriers for bicycles — Requirements and test methods |
ISO 11243:2016 specifies safety and performance requirements for the design and testing of luggage carriers intended for mounting (with or without tool) above and adjacent to the wheels of cycles and lays down guide lines for instructions on the use and care of such luggage carriers.
It does not apply to removable luggage (for example, handlebar bags or baskets that are not permanently attached).
Toy carrier intended to be mounted on bicycles for young children in the scope of ISO 8098 are not covered by ISO 11243:2016.
|
Published |
2016-06 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
43.150
Cycles
|
| ISO/FDIS 11243 |
Cycles — Luggage carriers for bicycles — Requirements and test methods |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
43.150
Cycles
|
| ISO 14878:2015 |
Cycles — Audible warning devices — Technical specification and test methods |
ISO 14878:2015 lays down the technical specifications, such as the sound pressure level and the durability, and specifies the corresponding test method for audible warning devices (AWD) which may be fitted to cycles.
ISO 14878:2015 applies to all types of audible warning devices (AWD) for use on bicycles.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
43.150
Cycles
|
| ISO 4000-1:1985 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
|
Withdrawn |
1985-05 |
Edition : 3 |
|
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:1989 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
|
Withdrawn |
1989-08 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:1994 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
|
Withdrawn |
1994-05 |
Edition : 5 |
Number of pages : 21 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:1995 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
Gives the designation, dimensions and load ratings of the metric series of tyres for passenger cars. Replaces the fifth edition, which has been technically revised.
|
Withdrawn |
1995-12 |
Edition : 6 |
Number of pages : 23 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:2001 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
|
Withdrawn |
2001-12 |
Edition : 7 |
Number of pages : 34 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:2001/Amd 1:2004 |
Passenger car tyres and rims — Part 1: Tyres (metric series) — Amendment 1 |
|
Withdrawn |
2004-05 |
Edition : 7 |
Number of pages : 6 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4306-2:1983 |
Lifting appliances — Vocabulary — Part 2: Parameters |
|
Withdrawn |
1983-09 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4000-1:2007 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
ISO 4000-1:2007 specifies the designation, dimensions and load ratings of metric-series tyres primarily intended for passenger cars.
|
Withdrawn |
2007-06 |
Edition : 8 |
Number of pages : 37 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:2010 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
ISO 4000-1:2010 specifies the designation, dimensions and load ratings of metric-series tyres primarily intended for passenger cars.
|
Withdrawn |
2010-04 |
Edition : 9 |
Number of pages : 50 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:2013 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
ISO 4000-1:2013 specifies the designation, dimensions and load ratings of metric-series tyres primarily intended for passenger cars.
|
Withdrawn |
2013-02 |
Edition : 10 |
Number of pages : 55 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:2015 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
ISO 4000-1:2015 specifies the designation, dimensions, and load ratings of metric-series tyres primarily intended for passenger cars.
|
Withdrawn |
2015-09 |
Edition : 11 |
Number of pages : 53 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4000-1:2021 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
This document specifies the designation, dimensions, and load ratings of metric-series tyres primarily intended for passenger cars.
|
Published |
2021-08 |
Edition : 12 |
Number of pages : 52 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO/DIS 4000-1 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
This document specifies the designation, dimensions, and load ratings of metric-series tyres primarily intended for passenger cars.
|
Under development |
|
Edition : 13 |
Number of pages : 58 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4209-1:1986 |
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
|
Withdrawn |
1986-05 |
Edition : 3 |
|
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4209-1:1988 |
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
|
Withdrawn |
1988-12 |
Edition : 4 |
Number of pages : 11 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4209-1:1993 |
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
This part specifies the designation, dimensions, and load ratings of tyres primarily intended for trucks and buses. It applies to bias-belted, diagonal and radial tyres mounted on 5° tapered rims and on 15° tapered (drop-centre) rims. It is also applicable to different concepts and types of tyres and rims; in these cases, however, appropriate rim/section ratios, coefficients, and construction codes have been added to tables 2 and 3.
|
Withdrawn |
1993-11 |
Edition : 5 |
Number of pages : 11 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4209-1:2001 |
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
|
Published |
2001-09 |
Edition : 6 |
Number of pages : 19 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4249-1:1978 |
Motorcycle tyres and rims (Existing series) — Part 1: Tyres |
|
Withdrawn |
1978-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4249-1:1978/Amd 1:1982 |
Motorcycle tyres and rims (Existing series) — Part 1: Tyres — Amendment 1 |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4249-1:1985 |
Motorcycle tyres and rims (Code-designated series) — Part 1: Tyres |
This second edition cancels and replaces the first edition (1978). This part sets out the designation in use and the dimensions for an inch code designated series of tyres. It applies to tyres used in highway service with a maximum speed of 150 km/h and fitted on rims with a nominal diameter corresponding to the codes from 14 up to and including 21.
|
Published |
1985-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4249-2:1983 |
Motorcycles tyres and rims (code designated series) — Part 2: Tyre load ratings |
|
Withdrawn |
1983-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4249-2:1983/Amd 1:1984 |
Motorcycles tyres and rims (code designated series) — Part 2: Tyre load ratings — Amendment 1 |
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4306-2:1985 |
Lifting appliances — Vocabulary — Part 2: Mobile cranes |
|
Withdrawn |
1985-05 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.020.20
Cranes
|
| ISO 4249-2:1990 |
Motorcycle tyres and rims (Code-designated series) — Part 2: Tyre load ratings |
Tabulates the correlation between load index and tyre load-carrying capacity (table 1), between speed symbol and speed category (table 2), the maximum tyre load capacities (table 3), and the variation of maximum load capacities of tyres according to maximum speed of motorcycle (table 4). This second edition cancels and replaces the first edition (1983).
|
Published |
1990-02 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4249-3:1986/Amd 1:1982 |
Motorcycle tyres and rims (Code-designated series) — Part 3: Rims — Amendment 1 |
|
Withdrawn |
1982-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO/CD 5273 |
Passenger car tyres — Preparation method for an artificially worn state for wet grip testing |
This document specifies the preparation of artificially worn tyres by tread rubber removal (cutter, buffing, grinding, etc.) for subsequent wet grip performance test.
This document applies to new passenger car tyres.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-1:1983 |
Motorcycle tyres and rims (metric series) — Part 1: Tyres — All series |
|
Withdrawn |
1983-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-1:1988 |
Motorcycle tyres and rims (metric series) — Part 1: Tyres, all series |
|
Withdrawn |
1988-11 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-1:1994 |
Motorcycle tyres and rims (metric series) — Part 1: Design guides |
Specifies design guides, designation, dimensions and load-carrying capacity of the metric series of motorcycle tyres. Applies to motorcycle tyres with reduced height/width ratio (100 and lower), that can be fitted on cylindrical bead seat rims or 5° tapered bead seat rims. Is also applicable to different concepts of tyres and rims. In this case, however, appropriate coefficients will be established. ISO 4249 deals with the requirements for motorcycle tyres and rims (code-designated series) for rim diameters code 13 and above, ISO 6054 with those for rim diameters code 12 and below.
|
Withdrawn |
1994-12 |
Edition : 4 |
Number of pages : 9 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-1:1994/Amd 1:1999 |
Motorcycle tyres and rims (metric series) — Part 1: Design guides — Amendment 1 |
|
Withdrawn |
1999-04 |
Edition : 4 |
Number of pages : 3 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-1:2001 |
Motorcycle tyres and rims (metric series) — Part 1: Design guides |
|
Withdrawn |
2001-12 |
Edition : 5 |
Number of pages : 14 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-1:2004 |
Motorcycle tyres and rims (metric series) — Part 1: Design guides |
ISO 5751-1:2004 gives guidelines for the design of, and specifies the designation and calculation of the dimensions for, metric-series motorcycle tyres. It is applicable to motorcycle tyres with a reduced height/width ratio (100 and lower) that can be fitted on cylindrical bead-seat or 5° tapered bead-seat rims. It is also applicable to other concepts of tyre and rim, provided the appropriate rim/section ratios and coefficients have been established for them.
|
Withdrawn |
2004-11 |
Edition : 6 |
Number of pages : 14 |
Technical Committee |
43.140
Motorcycles and mopeds
;
83.160.10
Road vehicle tyres
|
| ISO 5751-1:2004/Cor 1:2006 |
Motorcycle tyres and rims (metric series) — Part 1: Design guides — Technical Corrigendum 1 |
|
Withdrawn |
2006-07 |
Edition : 6 |
Number of pages : 1 |
Technical Committee |
43.140
Motorcycles and mopeds
;
83.160.10
Road vehicle tyres
|
| ISO 5751-1:2010 |
Motorcycle tyres and rims (metric series) — Part 1: Design guides |
ISO 5751-1:2010 gives guidelines for the design of, and specifies the designation and calculation of the dimensions for metric series motorcycle tyres. It is applicable to motorcycle tyres with a reduced height/width ratio (100 and lower) that can be fitted on cylindrical bead-seat or 5° tapered bead-seat rims. It is also applicable to other concepts of tyre and rim, provided the appropriate rim/section ratios and coefficients are established for them.
|
Published |
2010-11 |
Edition : 7 |
Number of pages : 14 |
Technical Committee |
43.140
Motorcycles and mopeds
;
83.160.10
Road vehicle tyres
|
| ISO 5751-2:1983 |
Motorcycle tyres and rims (metric series) — Part 2: Tyre series 80, 90 and 100 |
|
Withdrawn |
1983-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-2:1988 |
Motorcycle tyres and rims (metric series) — Part 2: Tyre series 100, 90, 80, 70 and 60 |
|
Withdrawn |
1988-11 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 4309:1981 |
Wire rope for lifting appliances — Code of practice for examination and discard |
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
53.020.20
Cranes
|
| ISO 5751-2:1994 |
Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities |
Specifies the designation, dimensions and load-carrying capacity of metric series 100, 90, 80, 70, 60, 55 and 50 motorcycle tyres to be mounted on the metric series of rims. Applies to motorcycle tyres with reduced height/width ratio (low profile). ISO 4249 deals with the requirements for motorcycle tyres and rims (code-designated series) for rim diameters code 13 and above, ISO 6054 with those for rim diameters code 12 and below.
|
Withdrawn |
1994-12 |
Edition : 3 |
Number of pages : 23 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-2:1994/Amd 1:1997 |
Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities — Amendment 1 |
|
Withdrawn |
1997-12 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-2:2002 |
Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities |
This part of ISO 5751 specifies the tyre size designation, dimensions and load-carrying capacities of metric-series motorcycle tyres.
It is applicable to metric-series motorcycle tyres with a height-to-width width ratio of 100 % and below.
NOTE See ISO 4249 for the requirements on motorcycle tyres and rims (code-designated series) for rim diameters code 13 and above; see ISO 6054 for the requirements on motorcycle tyres and rims (code-designated series) for rim diameters code 12 and below.
|
Withdrawn |
2002-03 |
Edition : 4 |
Number of pages : 25 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-2:2004 |
Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities |
ISO 5751-2:2004 specifies the tyre size designation, dimensions and load-carrying capacities of metric-series motorcycle tyres. It is applicable to such tyres with a height-to-width ratio of 100 % and below.
|
Withdrawn |
2004-11 |
Edition : 5 |
Number of pages : 30 |
Technical Committee |
43.140
Motorcycles and mopeds
;
83.160.10
Road vehicle tyres
|
| ISO 5751-2:2010 |
Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities |
ISO 5751-2:2010 specifies the tyre size designation, dimensions and load-carrying capacities of metric series motorcycle tyres. It is applicable to such tyres with a height-to-width ratio of 100 % and below.
|
Published |
2010-11 |
Edition : 6 |
Number of pages : 34 |
Technical Committee |
43.140
Motorcycles and mopeds
;
83.160.10
Road vehicle tyres
|
| ISO 5751-3:1994 |
Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours |
|
Withdrawn |
1994-12 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5751-3:2004 |
Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours |
ISO 5751-3:2004 specifies the approved rim contours for the rims on which metric-series motorcycle tyres are mounted.
|
Withdrawn |
2004-11 |
Edition : 5 |
Number of pages : 5 |
Technical Committee |
43.140
Motorcycles and mopeds
;
83.160.10
Road vehicle tyres
|
| ISO 5751-3:2010 |
Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours |
ISO 5751-3:2010 specifies the approved rim contours for motorcycle rims on which metric series motorcycle tyres are mounted.
|
Published |
2010-11 |
Edition : 6 |
Number of pages : 5 |
Technical Committee |
43.140
Motorcycles and mopeds
;
83.160.10
Road vehicle tyres
|
| ISO 5775-1:1980 |
Bicycle tyres and rims — Part 1: Tyre designations and dimensions |
|
Withdrawn |
1980-10 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5775-1:1980/Add 1:1982 |
Bicycle tyres and rims — Part 1: Tyre designations and dimensions — Addendum 1 |
|
Withdrawn |
1982-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5775-1:1988 |
Bicycle tyres and rims — Part 1: Tyre designations and dimensions |
|
Withdrawn |
1988-11 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 5775-1:1994 |
Bicycle tyres and rims — Part 1: Tyre designations and dimensions |
|
Withdrawn |
1994-10 |
Edition : 4 |
Number of pages : 11 |
Technical Committee |
83.160.10
Road vehicle tyres
|