| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 3463:1984 |
Agricultural and forestry wheeled tractors — Protective structures — Dynamic test method and acceptance conditions |
|
Withdrawn |
1984-05 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 3463:1989 |
Wheeled tractors for agriculture and forestry — Protective structures — Dynamic test method and acceptance conditions |
This third edition cancels and replaces the second edition (1984). Specifies a test method and the acceptance conditions for protective structures of tractors. Applies to tractors having at least two axles foe pneumatic-tyred, with or without track attachments, and with a basic mass of 800 to 6000 kg. The minimum track width of rear wheels should generally be greater than 1150 mm.
|
Withdrawn |
1989-10 |
Edition : 3 |
Number of pages : 18 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 3463:1989/Amd 1:1998 |
Wheeled tractors for agriculture and forestry — Protective structures — Dynamic test method and acceptance conditions — Amendment 1 |
|
Withdrawn |
1998-12 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 3463:2006 |
Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Dynamic test method and acceptance conditions |
ISO 3463:2006 specifies a dynamic test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled tractors for agriculture and forestry.
It is applicable to tractors having at least two axles for wheels mounted with pneumatic tyres, or having tracks instead of wheels, with an unballasted tractor mass of not less than 600 kg, but generally less than 6 000 kg, and with a minimum track width of the rear wheels greater than 1 150 mm.
|
Published |
2006-11 |
Edition : 4 |
Number of pages : 30 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 3767-2:1982 |
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery |
|
Withdrawn |
1982-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3767-2:1982/Add 1:1985 |
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery — Addendum 1 |
|
Withdrawn |
1985-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3776-1:2006 |
Tractors and machinery for agriculture — Seat belts — Part 1: Anchorage location requirements |
ISO 3776-1:2006 specifies the location, relative position and threaded hole dimensions of the anchorages for pelvic restraint (seat) belt assemblies intended to be used by the operators of agricultural tractors and self-propelled machinery.
|
Published |
2006-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3776-2:2007 |
Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements |
ISO 3776-2:2007 specifies the strength requirements of the anchorages for pelvic restraint (seat) belts intended to be used by the operators of agricultural tractors and self-propelled machinery.
|
Withdrawn |
2007-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3776-2:2013 |
Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements |
ISO 3776-2:2013 specifies the strength requirements of the anchorages for pelvic restraint (seat) belts intended to be used by the operators of agricultural tractors and self-propelled machinery.
|
Published |
2013-02 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3776-3:2009 |
Tractors and machinery for agriculture — Seat belts — Part 3: Requirements for assemblies |
ISO 3776-3:2009 specifies the requirements for pelvic restraint (seat) belt assemblies intended to be used by the operators of agricultural tractors and self-propelled machinery.
|
Published |
2009-06 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3776:1976 |
Agricultural tractors — Anchorages for seat belts |
|
Withdrawn |
1976-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 4330:1994 |
Photography — Determination of the curl of photographic film and paper |
|
Withdrawn |
1994-12 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3776:1989 |
Tractors for agriculture — Seat belt anchorages |
This second edition cancels and replaces the first editon (1976). Specifies the requirements for the location of the anchorages for pelvic restraint belts for operators of tractors fitted with a protective structure, the force that the anchorages shall be capable of withstanding and the tests to which they be subjected. Figures 1 and 2 illustrate details.
|
Withdrawn |
1989-09 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO/TR 3778:1978 |
Agricultural tractors — Maximum actuating forces required to operate controls |
|
Withdrawn |
1978-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO/TR 3778:1987 |
Agricultural tractors — Maximum actuating forces required to operate controls |
This second edition cancels and replaces the first edition (1978). Recommends the maximum actuating forces; the forces specified do not relate to machine performance. Tabulates the devices to be operated, the types of control, the actuating forces required (ranging from 70 to 600 N). Applies to tractors equipped with normal controls.
|
Withdrawn |
1987-04 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3965:1977 |
Agricultural wheeled tractors — Determination of maximum travel speed |
|
Withdrawn |
1977-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3965:1990 |
Agricultural wheeled tractors — Maximum speeds — Method of determination |
This second edition cancels and replaces the first edition (1977). Specifies a method for catculating the maximum design speed and a method for measuring the maximum travel speed of tractors. The normative annex A contains a specimen test report.
|
Published |
1990-02 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 4252:1983 |
Agricultural tractors — Access, exit and the operator's workplace — Dimensions |
|
Withdrawn |
1983-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 4252:1992 |
Agricultural tractors — Operator's workplace, access and exit — Dimensions |
Specifies design dimensions concerning minimum dimensions of access doorways; number, location and minimum dimensions of emergency exits; minimum internal clearance dimensions. Applies to tractors for agriculture having a minimum track width exceeding 1150 mm.
|
Withdrawn |
1992-12 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 4252:2007 |
Agricultural tractors — Operator's workplace, access and exit — Dimensions |
ISO 4252:2007 specifies the design dimensions of agricultural tractors having a minimum track width exceeding 1 150 mm in respect of the minimum dimensions of their access doorways, the number, location and minimum dimensions of their emergency exits, and their minimum internal clearance dimensions.
|
Published |
2007-11 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 4253:1977 |
Agricultural tractors — Operator's seating accommodation — Dimensions |
|
Withdrawn |
1977-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 4253:1993 |
Agricultural tractors — Operator's seating accommodation — Dimensions |
Lays down dimensions for the operator's seat and the location of specific controls relative to the seat index point within the seating accommodation on agricultural tractors with a track width greater than 1150 mm. The controls included are the steering-wheel, clutch pedal, brake pedal(s), and throttle pedal. Standardized dimensions and locations will assist the future design of operator's seating accommodation on agricultural tractors.
|
Published |
1993-09 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 4254-3:1992 |
Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 3: Tractors |
Provides guidelines regarding the prevention of accidents arising from the use of tractors and indicates appropriate parameters to be met when designing tractors.
|
Withdrawn |
1992-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5007:1990 |
Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration |
This first edition cancels and replaces the first edition of the Technical Report ISO/TR 5007:1980. Specifies a method for measuring and evaluating the effectiveness of the seat in reducing the vertical whole-body vibration transmitted to the operator of an tractor. Applies to seats fitted to tractors within specified classes, each class being defined as a group of tractors having similar vibration characteristics (table 2).
|
Withdrawn |
1990-02 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO/TR 5007:1980 |
Agricultural wheeled tractors — Operator seat — Measurement of transmitted vibration |
|
Withdrawn |
1980-11 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5007:2003 |
Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration |
ISO 5007:2003 specifies, in accordance with ISO 10326-1, a laboratory method for measuring and evaluating the effectiveness of the suspension of operator seats on agricultural wheeled tractors. It also specifies acceptance criteria based on the test results, while defining the input spectral classes relating to three classes of agricultural tractor with rubber tyres, unsprung rear axles and no low-frequency cab isolation -- those of up to 3 600 kg (class 1), those of from 3 600 kg to 6 500 kg (class 2), and those of over 6 500 kg (class 3) -- each of which defines a group of machines having similar vibration characteristics.
The method tests the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator at frequencies of from 1 Hz to 20 Hz. It is not applicable to vibration reaching the operator other than through the seat (e.g. that sensed by the operator's feet on the platform or control pedals or hands on the steering wheel).
|
Published |
2003-03 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5670:1984 |
Agricultural trailers — Single-acting telescopic tipping cylinders — 25 MPa (250 bar) series — Types 1, 2 and 3 — Interchangeability dimensions |
Lays down dimensional characteristics and specifies the test pressure of the types of hydraulic tipping cylinders currentlyused on agricultural tippers, in order to provide a reasonable limited range from which manufactures may choose a suitable cylinder to meet current and projected requirements. Figures 1 to 3 illustrate details of the various types.
|
Published |
1984-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5675:1981 |
Agricultural tractors and machinery — Hydraulic couplers for general purposes — Specifications |
|
Withdrawn |
1981-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5675:2008 |
Agricultural tractors and machinery — General purpose quick-action hydraulic couplers |
ISO 5675:2008 specifies the essential interface dimensions, as defined in ISO 7241-1, and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural machinery. It is applicable to couplers used in hydraulic lines other than those used for braking circuits (see ISO 5676).
|
Withdrawn |
2008-08 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5675:2021 |
Agricultural tractors and machinery — General purpose quick-action hydraulic couplers |
This document specifies the essential interface dimensions and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural machinery. It is applicable to couplers used in hydraulic lines other than those used for braking circuits.
NOTE All hydraulic couplers are intended to be connected and disconnected frequently to allow the transfer of machinery from one tractor to another without the use of tools or special devices.
|
Published |
2021-06 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5692-1:2004 |
Agricultural vehicles — Mechanical connections on towed vehicles — Part 1: Dimensions for hitch rings of 50/30 mm cross section |
ISO 5692-1:2004 specifies the requirements for the attachment of agricultural non-balanced trailers and implements by means of hitch-rings to the rear of the towing vehicle equipped with either a hook as specified in ISO 6489-1, or a piton-type coupling as specified in ISO 6489-4. Its purpose is to ensure the interchangeability of mechanical connections on agricultural towed vehicles.
|
Published |
2004-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5692-2:2002 |
Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket |
This part of ISO 5692 specifies the requirements for vehicle coupling rings with a ring inside diameter of for
coupling with the drawbar coupling specified in ISO 6489-2, and for ensuring vehicle coupling with the necessary
horizontal and vertical rotation angle.
This part of ISO 5692 is applicable to couplings where the vertical static load is not more than and the
dynamic horizontal load is not more than the value of .
NOTE For value , see ISO 6489-2.
|
Published |
2002-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5692-2:2002/Cor 1:2004 |
Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket — Technical Corrigendum 1 |
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO/DIS 21809-2 |
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings |
|
Deleted |
|
Edition : 3 |
Number of pages : 54 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
|
| ISO 5692-3:2011 |
Agricultural vehicles — Mechanical connections on towed vehicles — Part 3: Swivel hitch rings |
ISO 5692-3:2011 specifies the requirements for hitch rings used for the attachment of agricultural trailers and implements to the rear of self-propelled agricultural vehicles equipped with a non-swivel clevis coupling as specified in ISO 6489-5.
|
Published |
2011-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5692:1979 |
Agricultural vehicles — Mechanical connections on towed vehicles — Hitch-rings — Specifications |
Specifies the requirements for the attachment of towed vehicles by means of ring type hitches. Applies to trailers and to implements attached to the rear of the towing vehicle. Includes operating conditions and interchangeability dimensions. Two figures show details.
|
Withdrawn |
1979-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5696:1984 |
Trailed agricultural vehicles — Brakes and braking devices — Laboratory test method |
Specifies a method of bench brakes their control devices in order to dertermine their suitability for use on trailed vehicles. Applies to assisted mechanical braking devices, using either compressed air or hydraulic fluid under pressure, for mounting on trailed vehicles. Annex A contains an example of a test report on axle brakes; annex B contains an example of a test report on an axle brake control device; annex C shows the processing of the results.
|
Published |
1984-10 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5700:1984 |
Agricultural and forestry wheeled tractors — Protective structures — Static test method and acceptance conditions |
|
Withdrawn |
1984-07 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 5700:1989 |
Wheeled tractors for agriculture and forestry — Protective structures — Static test method and acceptance conditions |
This third edition cancels and replaces the second edition (1984) . Specifies a static loading test method and applies to tractors having at least two axles for pneumatic-tyred wheels, with or without track attachments, and with a tractor mass not less than 800 kg and not more than 15 000 kg. Annex A contains requirements for providing resistance to brittle fracture of protective structure at reduced operating temperature; annex B includes the test report and annex C the data sheet for protective structure.
|
Withdrawn |
1989-12 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 5700:1989/Amd 1:1998 |
Wheeled tractors for agriculture and forestry — Protective structures — Static test method and acceptance conditions — Amendment 1 |
|
Withdrawn |
1998-12 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5700:2006 |
Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Static test method and acceptance conditions |
ISO 5700:2006 specifies a static test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled tractors for agriculture and forestry.
It is applicable to tractors having at least two axles for wheels mounted with pneumatic tyres, or having tracks instead of wheels, with an unballasted tractor mass of not less than 800 kg and a minimum track width of the rear wheels greater than 1 150 mm.
|
Withdrawn |
2006-11 |
Edition : 4 |
Number of pages : 27 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 5700:2013 |
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions |
ISO 5700:2013 specifies a static test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled or tracked tractors for agriculture and forestry.
It is applicable to tractors having at least two axles for wheels mounted with pneumatic tyres, or having tracks instead of wheels, with an unballasted tractor mass of not less than 600 kg and a minimum track width of the rear wheels greater than 1 150 mm. It is not applicable to tractors having a mass ratio (maximum permissible mass / reference mass) greater than 1,75.
|
Published |
2013-05 |
Edition : 5 |
Number of pages : 39 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 5721-1:2013 |
Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator's field of vision — Part 1: Field of vision to the front |
ISO 5721-1:2013 specifies the requirements, test procedures and acceptance criteria for the field of vision to the front of the operator of agricultural tractors.
|
Published |
2013-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3183-3:1999/Cor 1:2000 |
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C — Technical Corrigendum 1 |
|
Withdrawn |
2000-03 |
Edition : 1 |
|
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 5721-2:2014 |
Agricultural tractors— Requirements, test procedures and acceptance criteria for the operator's field of vision — Part 2: Field of vision to the side and to the rear |
ISO 5721-2:2014 specifies the requirements, test procedures, and acceptance criteria for the field of
vision to the side and the rear of the operator of agricultural tractors.
|
Published |
2014-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5721:1981 |
Agricultural tractors — Operator's field of vision |
|
Withdrawn |
1981-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5721:1989 |
Tractors for agriculture — Operator's field of vision |
This second edition cancels and replaces the first edition (1981). Specifies practical and mathematical methods of determining the masking effects of obstruction on the angles of vision forward, to the rear and upwards of seated operators of tractors. It does not take account of detachable implements and mounted elements, for example front loaders, pallets, ect.
|
Withdrawn |
1989-10 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6094:1981 |
Agricultural and forestry tractors — Accidental overturning report form |
|
Withdrawn |
1981-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
;
65.060.80
Forestry equipment
|
| ISO 6489-1:1980 |
Agricultural vehicles — Mechanical connections on towing vehicles — Part 1: Hook type — Dimensions |
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-1:1991 |
Agricultural vehicles — Mechanical connections on towing vehicles — Part 1: Hook type |
|
Withdrawn |
1991-09 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-1:2001 |
Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 1: Dimensions of hitch-hooks |
This part of ISO 6489 specifies the dimensional requirements for hitch-hooks used in the attachment to agricultural
towing vehicles of towed, non-balanced trailers and implements equipped with a ring specified in ISO 20019. Its
purpose is to ensure the interchangeability of the mechanical connections on agricultural towing vehicles.
This part of ISO 6489-1 is applicable only in those cases where the vertical static load does not exceed 30 kN.
|
Published |
2001-01 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-2:1980 |
Agricultural vehicles — Mechanical connections on towing vehicles — Part 2: Clevis type — Dimensions |
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-2:2002 |
Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 2: Specifications for clevis coupling 40 |
This part of ISO 6489 gives specifications for the clevis couplings used in the attachment to agricultural towing vehicles of towed, non-balanced trailers and implements equipped with a coupling ring 40 specified in ISO 5692-2 and ISO 8755.
The mounting of one of the three trailer coupling shapes, A, B or C, on an agricultural vehicle or trailer is at the manufacturer's or user's discretion. The full interchangeability of the three shapes is provided for.
|
Published |
2002-07 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-3:1992 |
Agricultural vehicles — Mechanical connections on towing vehicles — Part 3: Tractor drawbar |
Specifies the dimensional requirements, location and vertical static loads. Annex A gives drawbar locations for special applications.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-3:2004 |
Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 3: Tractor drawbar |
ISO 6489-3:2004 specifies the dimensional requirements and location for category 0, 1, 2, 3, 4 and 5 drawbars mounted on the rear of agricultural tractors.
|
Withdrawn |
2004-06 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-3:2021 |
Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 3: Tractor drawbar |
This document specifies the dimensional requirements and location for category 0, 1, 2, 3, 4 and 5 drawbars mounted on the rear of agricultural tractors.
|
Published |
2021-02 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 3183:1980 |
Oil and natural gas industries — Steel line pipe |
|
Withdrawn |
1980-09 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 6489-4:2004 |
Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 4: Dimensions of piton-type coupling |
ISO 6489-4:2004 specifies the dimensional requirements for the piton-type coupling devices used in the attachment to agricultural towing vehicles of towed, non-balanced trailers and implements equipped with a coupling ring specified in ISO 5692-1. Its purpose is to ensure the interchangeability of the mechanical connections on agricultural towing vehicles. It is applicable only in those cases where the vertical static load does not exceed 30 kN.
|
Published |
2004-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.060.01
Agricultural machines and equipment in general
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-5:2011 |
Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 5: Specifications for non-swivel clevis couplings |
ISO 6489-5:2011 specifies the requirements for non-swivel clevis couplings used for the attachment of agricultural trailers and implements equipped with a swivel hitch ring as specified in ISO 5692-3 to the rear of self-propelled agricultural vehicles.
|
Withdrawn |
2011-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 6489-5:2019 |
Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 5: Specifications for non-swivel clevis couplings |
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 7071:1981 |
Agricultural tractors — Mounting for front ballast weights |
|
Withdrawn |
1981-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 7072:1982 |
Agricultural wheeled tractors — Three-point-linkage — Linch pins — Dimensions |
|
Withdrawn |
1982-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 7424:1982 |
Agricultural equipment — Matching of wheeled tractors and rear mounted implements — Code numbering system |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8002:1986 |
Mechanical vibrations — Land vehicles — Method for reporting measured data |
Specifies a uniform method. Applies to data to be used for certain types of structural testing and data on vibration measured at the vehicle-occupant interface. Applies to original reports of measured data and to reports or other publications which assess, summarize, compare or compile measured data from original reports.
|
Published |
1986-04 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
17.160
Vibrations, shock and vibration measurements
;
43.020
Road vehicles in general
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8759-1:1985 |
Agricultural wheeled tractors — Front-mounted linkage and power take-off — Part 1: Power take-off |
|
Withdrawn |
1985-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8759-1:1998 |
Agricultural wheeled tractors — Front-mounted equipment — Part 1: Power take-off and three- point linkage |
|
Withdrawn |
1998-03 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8759-1:2018 |
Agricultural tractors — Front-mounted equipment — Part 1: Power take-off: Safety requirements and clearance zone around PTO |
This document specifies safety requirements for, and clearance zones around, front-mounted power take-offs (PTO) on agricultural tractors.
NOTE 1 Further specifications for front-mounted power take-offs are given in ISO 8759-3.
It is not applicable to tractors which are designed to run in two directions, where either end can be considered to be the front or the rear.
NOTE 2 In this case, ISO 500 (all parts) apply.
|
Published |
2018-11 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8759-2:1985 |
Agricultural wheeled tractors — Front-mounted linkage and power take-off — Part 2: Front linkage |
|
Withdrawn |
1985-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8759-2:1998 |
Agricultural wheeled tractors — Front-mounted equipment — Part 2: Stationary equipment connection |
This part of ISO 8759 specifies dimensions and requirements of the stationary equipment connection for agricultural wheeled tractors which are equipped with front-mounted power take-off but do not have front three-point linkage.
It is applicable to the tractor categories defined in ISO 730-1.
NOTE — ISO 8759-1 specifies requirements for the power take-off and the front three-point linkage.
|
Published |
1998-03 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8759-3:2018 |
Agricultural tractors — Front-mounted equipment — Part 3: Power take-off: General specifications and location |
This document gives general specification and location requirements for front-mounted power take-offs (PTO) on agricultural tractors.
NOTE 1 Further specifications for front-mounted power take-offs are given in ISO 8759-1.
It is not applicable to tractors which are designed to run in two directions, where either end can be considered to be the front or the rear.
NOTE 2 In this case, ISO 500 (all parts) apply.
|
Published |
2018-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8759-4:2018 |
Agricultural tractors — Front-mounted equipment — Part 4: Three-point linkage |
This document specifies dimensions and requirements for three-point linkage in association with a power lift for the attachment of implements or equipment to the front of agricultural tractors.
It is not applicable to tractors which are designed to run in two directions, where either end can be considered to be the front or the rear.
NOTE In this case, ISO 730 applies.
|
Published |
2018-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 8935:1990 |
Tractors for agriculture and forestry — Mountings and apertures for external equipment controls |
Specifies requirements to allow mounting of additional controls and instrumentation used for remote operation of supplementary machinery and equipment on tractors, and provision of an electrical power-point adjacent to the mounting; it also lays down requirements for an apeture through which the control cable or hose enters the tractor cab. Some figures illustrate the meaning of the description.
|
Published |
1990-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 10326-1:1992 |
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements |
Specifies the test method, the instrumentation requirements, the measuring assessment method and the way to report the test result.
|
Withdrawn |
1992-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
43.020
Road vehicles in general
;
53.100
Earth-moving machinery
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 10326-1:1992/Amd 1:2007 |
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements — Amendment 1 |
|
Withdrawn |
2007-09 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
43.020
Road vehicles in general
;
53.100
Earth-moving machinery
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 10326-1:1992/Amd 2:2011 |
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements — Amendment 2 |
|
Withdrawn |
2011-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
43.020
Road vehicles in general
;
53.100
Earth-moving machinery
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 10326-1:2016 |
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements |
ISO 10326-1:2016 specifies basic requirements for the laboratory testing of vibration transmission through a vehicle seat to the occupant. These methods for measurement and analysis make it possible to compare test results from different laboratories for equivalent seats.
It specifies the test method, the instrumentation requirements, the measuring assessment method and the way to report the test result.
ISO 10326-1:2016 applies to specific laboratory seat tests which evaluate vibration transmission to the occupants of any type of seat used in vehicles and mobile off-road machinery.
Application standards for specific vehicles refer to this document when defining the test input vibration that is typical for the vibration characteristics of the type or class of vehicle or machinery in which the seat is to be fitted.
NOTE Examples of application standards are given in the bibliography.
|
Published |
2016-10 |
Edition : 2 |
Number of pages : 22 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
43.020
Road vehicles in general
;
53.100
Earth-moving machinery
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 10998:1995 |
Agricultural wheeled tractors — Steering requirements |
Specifies performance requirements for normal and emergency steering modes for agricultural wheeled tractors having at least two axles fitted with pneumatic tyres. Does not apply to track-type or skid-steered agricultural tractors.
|
Withdrawn |
1995-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO/AWI 3095 |
Acoustics — Railway applications — Measurement of noise emitted by railbound vehicles |
|
Under development |
|
Edition : 4 |
|
Technical Committee |
45.020
Railway engineering in general
;
17.140.30
Noise emitted by means of transport
|
| ISO 10998:2008 |
Agricultural tractors — Requirements for steering |
ISO 10998:2008 specifies performance and safety requirements for both normal and emergency steering modes of agricultural tractors. It is applicable to those tractors having a maximum design speed, measured in accordance with ISO 3965, not exceeding (60 ± 3) km/h.
It is not applicable to track-laying tractors equipped with steel tracks having a maximum design speed, measured in accordance with ISO 3965, not exceeding (15 ± 3) km/h.
|
Published |
2008-06 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 10998:2008/Amd 1:2014 |
Agricultural tractors — Requirements for steering — Amendment 1 |
|
Published |
2014-02 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 11471:1995 |
Agricultural tractors and machinery — Coding of remote hydraulic power services and controls |
Specifies the coding to be used to identify the couplings and controls for the remote hydraulic power services of agricultural tractors, machinery and implements.
|
Published |
1995-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO/CD 11471 |
Agricultural tractors and machinery — Coding of remote hydraulic power services and controls |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 12003-1:2002 |
Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 1: Front-mounted roll-over protective structures |
ISO 12003-1 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) front-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable front, two-post ROPS, includes any associated rear fixtures, and is applicable to such tractors, so equipped, having the following characteristics: a ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential); a fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle; a mass greater than 600 kg but less than 3 000 kg unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
|
Withdrawn |
2002-11 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 12003-1:2008 |
Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 1: Front-mounted ROPS |
ISO 12003-1:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) front-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, front, two-post ROPS, including any associated rear fixtures, and is applicable to tractors so equipped having the following characteristics.
A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential).
A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres.
A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
|
Withdrawn |
2008-08 |
Edition : 2 |
Number of pages : 44 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 12003-1:2021 |
Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 1: Front-mounted ROPS |
This document specifies procedures for both the static and dynamic strength testing of roll-over protective structures (ROPS) front-mounted on narrow tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, front, two-post ROPS, including any associated rear fixtures, and is applicable to tractors so equipped having the following characteristics:
— a ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential);
— a fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm;
NOTE It is understood that the axle mounted with the wider tyres is set at a track width of not more than 1 150 mm. Tyre track width is adjustable so that the outer edges of the narrower tyres do not extend beyond the outer edges of the tyres of the other axle. Where the two axles are fitted with rims and tyres of the same size, the fixed or adjustable track width of the two axles is less than 1 150 mm.
— a mass greater than 400 kg but less than 3 500 kg, unballasted, including the ROPS and tyres of the largest size recommended by the manufacturer;
— fitted with roll-over protective structures of the dual-pillar type mounted only in front of the seat index point (SIP) and characterised by a reduced clearance zone attributable to the tractor silhouette.
This document also specifies optional testing procedures for both seat anchorage points and folding efforts of front-mounted ROPS designed to fold.
|
Published |
2021-06 |
Edition : 3 |
Number of pages : 61 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 12003-2:2002 |
Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 2: Rear-mounted roll-over protective structures |
ISO 12003-2 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agriculture and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post rollbar, frame and cab ROPS, and is applicable to such tractors, so equipped, having the following characteristics: a ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential); a fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle; a mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
|
Withdrawn |
2002-11 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 12003-2:2008 |
Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 2: Rear-mounted ROPS |
ISO 12003-2:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll bar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics.
A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential).
A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle.
A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
|
Withdrawn |
2008-08 |
Edition : 2 |
Number of pages : 38 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 12003-2:2021 |
Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 2: Rear-mounted ROPS |
This document specifies procedures for both the static and dynamic strength testing of roll-over protective structures (ROPS) rear-mounted on narrow tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll bar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics:
a ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential);
a fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm and with the overall width of the other axle being less than that of the first axle, including where the two axles are fitted with rims and tyres of the same size;
a fixed driving position and a mass greater than 400 kg, unballasted, including the ROPS and tyres of the largest size recommended by the manufacturer;
a reversible driving position (reversible seat and steering wheel), with a mass greater than 400 kg, unballasted, including the ROPS and tyres of the largest size recommended by the manufacturer and maximum unballasted mass less than 3 500 kg and maximum permissible mass less than 5 250 kg;
a mass ratio less than 1,75;
a ROPS of the rollbar, frame or cab type, mounted partly or entirely behind the seat index point and having a zone of clearance whose upper limit is (810 + av) mm above the seat index point in order to provide a sufficiently large area or unobstructed space for the protection of the driver.
This document also specifies optional testing procedures for both seat anchorage points and folding efforts of rear-mounted ROPS designed to fold.
|
Published |
2021-06 |
Edition : 3 |
Number of pages : 58 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 12368:2001 |
Agricultural vehicles — Mechanical hook-type connections on towing vehicles — Test methods and requirements |
This International Standard specifies a dynamic test method for mechanical hook-type connections and hook
coupling devices, as well as a static test of their keeper plates. It is applicable to hooks meeting the requirements of
ISO 6489-1 used on towing vehicles with an unladen mass of up to 10 t. Towing vehicles with a greater unladen
mass are nevertheless treated as 10 t towing vehicles, especially with regard to their reference mass.
|
Published |
2001-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 16154:2005 |
Tractors and machinery for agriculture and forestry — Installation of lighting, light signalling and marking devices for travel on public roadways |
ISO 16154:2005 specifies the characteristics and installation of lighting and marking devices on agricultural and forestry tractors, self-propelled agricultural machines, agricultural trailers and trailed machines when operated on public roads. It is not applicable to purpose-built forestry machines as defined in ISO 6814 or to motor vehicles such as automobiles, buses, trucks and their trailers.
|
Published |
2005-04 |
Edition : 1 |
Number of pages : 41 |
Technical Committee |
43.040.30
Indicating and control devices
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 17567:2005 |
Agricultural and forestry tractors and implements — Hydraulic power beyond |
ISO 17567:2005 specifies the hydraulic power beyond of tractors used in agricultural and forestry, and the number, type, capacity and identification of the associated connections between these tractors and their implements.
|
Withdrawn |
2005-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 17567:2020 |
Agricultural and forestry tractors and implements — Hydraulic power beyond |
This document defines hydraulic power beyond. It specifies the number, type, capacity, and identification of the connections between agricultural and forestry tractors and implements.
|
Published |
2020-08 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 17612:2004 |
Tractors and machinery for agriculture and forestry — Auxiliary-power-transmission connector for the operator station |
ISO 17612:2004 specifies the essential interface dimensions of a connector and its plug for the transmission of 12 V electrical power within the enclosed operator station of agricultural tractors and machinery. The device is intended to be used as a non-environmentally sealed, convenient source for power auxiliary devices, providing a means for the operator to obtain electrical power without altering the tractor/machine electrical wiring harness. The maximum current capacity of the specified device is 30 A: it is not applicable to any other voltage system (6 V or 24 V).
|
Published |
2004-02 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 17900:2002 |
Agricultural trailers — Balanced and semi-mounted trailers — Determination of payload, vertical static load and axle load |
This International Standard specifies a method for determining the payloads, vertical static drawbar loads and axle
loads of agricultural semi-mounted and balanced trailers by means of weighing the empty trailer and then calculating
the requirements.
|
Published |
2002-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 20019:2001 |
Agricultural vehicles — Mechanical connections on towed vehicles — Dimensions for hitch rings |
This International Standard specifies dimensional requirements for the attachment of agricultural, non-balanced
trailers and implements by means of hitch rings to the rear of towing vehicles equipped with a hook specified in ISO
6489-1. Its purpose is to ensure the interchangeability of the mechanical connections on agricultural towed
vehicles.
This International Standard is applicable to rings whose coupling point is below the centre-line of the rear axle and
the power take-off (PTO) of the tractor.
NOTE Other International Standards are to be developed for rings above the PTO coupling.
|
Published |
2001-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 20019:2001/Cor 1:2004 |
Agricultural vehicles — Mechanical connections on towed vehicles — Dimensions for hitch rings — Technical Corrigendum 1 |
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 20112-1:2018 |
Tractors and machinery for agriculture and forestry — Camera interface between tractor and implement — Part 1: Analogue camera interface |
This document defines the physical link between analogue cameras mounted on implements and operator terminals or monitors installed in tractor cabins. The interface supports up to two analogue video streams and provides electrical power to the cameras. It is designed to be installed inside the cab of agricultural equipment.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
35.240.99
IT applications in other fields
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 20383:2017 |
Tractors and machinery for agriculture and forestry — Speed Identification Sign (SIS) |
ISO 20383:2017 specifies the dimensions, characteristics, and positioning of Speed Identification Signs (SIS). These signs indicate the maximum equipment ground speed, based on the ground speed design capability, for an agricultural vehicle.
A rear-facing SIS is visible to other operators on public roads approaching the equipment from behind. A forward-facing SIS, mounted on the front of towed equipment, alerts operators of the towing vehicle of the maximum specified ground speed capabilities at which the equipment combination can be operated.
ISO 20383:2017 is applicable to self-propelled, semi-integral and towed equipment moving on public roads.
|
Published |
2017-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 21244:2008 |
Agricultural equipment — Mechanical connections between towed and towing vehicles — Implement hitch rings and attachment to tractor drawbars |
ISO 21244:2008 specifies dimensional requirements for the hitch rings of agricultural trailers and trailed implements designed to be attached to agricultural tractor drawbars according to ISO 6489-3.
|
Published |
2008-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 22471:2020 |
Permissible mechanical connection combinations between towed and towing agricultural vehicles |
This document provides a list of the recommended mechanical connection combination standards for towing and towed agricultural vehicles.
|
Published |
2020-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.060.10
Agricultural tractors and trailed vehicles
|