| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/TR 8354:1987 |
Rubber hoses and hose assemblies for underground mining — Textile-reinforced air and water type |
Specifies the requirements for one type of textile reinforced hose for use with air and water having a design working pressure from 0.7 to 1.4 MPa, dependent upon the bore size. The hose is designed for use in underground mining applications, where there is a specific requirements for the hose to have antistatic and flame-resistant properties. 3 tables with values of dimensions and physical properties.
|
Withdrawn |
1987-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
;
83.140.40
Hoses
|
| ISO 8866:1991 |
Rotary core diamond drilling equipment — System C |
|
Published |
1991-05 |
Edition : 1 |
Number of pages : 46 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 8866:1991/Cor 1:1991 |
Rotary core diamond drilling equipment — System C — Technical Corrigendum 1 |
Figure 13: change the value for the dimension D for type M(DM)59C from 49 to 44,3. Figure 30: change the value for the dimension Dx for type DP76C from 75 to 76.
|
Published |
1991-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 8866:1991/Cor 2:1992 |
Rotary core diamond drilling equipment — System C — Technical Corrigendum 2 |
Changes in Figure 20 (page 21) "Type DM" to "Type DT".
|
Published |
1992-01 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 10097-1:1999 |
Wireline diamond core drilling equipment — System A — Part 1: Metric units |
This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability
of the following wireline drilling equipment for drilling holes 48 mm to 96 mm in diameter, yielding cores of 27 mm to
63 mm in diameter.
The equipment is illustrated in Figure 1 and comprises the following:
a) core bit;
b) reaming shell;
c) core lifter;
d) core lifter case;
e) outer tube;
f) inner tube;
g) drill rod (smooth pipe only).
|
Published |
1999-10 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 10097-2:1999 |
Wireline diamond core drilling equipment — System A — Part 2: Inch units |
This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability
of the following wireline drilling equipment for drilling holes of diameter 1,890 in to 3,790 in, yielding cores of
diameter 1,063 in to 2,500 in.
The equipment is illustrated in Figure 1 and comprises the following:
a) core bit;
b) reaming shell;
c) core lifter;
d) core lifter case;
e) outer tube;
f) inner tube;
g) drill rod (smooth pipe only).
|
Published |
1999-10 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 10098:1992 |
Wireline diamond core drilling equipment — System CSSK |
Specifies the material for and dimensions of equipment for drilling in solid or weakly fissured medium hard or hard formations to depths of 1200 m to 1500 m. Applies to equipment with outer bit diameters of 46 mm, 59 mm, 76 mm and 93 mm with corresponding core diameters from 24 mm to 59 mm.
|
Published |
1992-10 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 10207:1991 |
Rock drilling equipment — Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm |
Specifies the basic dimensions of rope threaded drill steel equipment for percussive drilling of 8 nominal sizes. This equipment comprises mainly hexagonal shank rods, extension rods, coupling sleeves and drill bits.
|
Published |
1991-02 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 10207:1991/Cor 1:1991 |
Rock drilling equipment — Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm — Technical Corrigendum 1 |
|
Published |
1991-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 10208:1991 |
Rock drilling equipment — Left-hand rope threads |
Defines dimensions and tolerances of left-hand rope threads to be used on rope threaded drill steel equipment for percussive drilling. Five sets of values are given.
|
Published |
1991-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 18758-1:2018 |
Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 1: Vocabulary |
This document defines terms relating to rock drill rigs and rock reinforcement rigs, including their intended use, working methods, types, and main components.
It also provides (see Annex A) several classifications of rock drill rigs, based on intended use, mobility and type of operation.
The primary use of this document is in instruction handbooks for rock drill rigs and in marketing material. Safety related terminology is used in ISO 18758‑2.
This document is not applicable to drill rigs for soil and rock mixture.
NOTE Documents covering vocabulary of related subjects are found in the bibliography.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
53.100
Earth-moving machinery
;
01.040.53
Materials handling equipment (Vocabularies)
;
01.040.73
Mining and minerals (Vocabularies)
;
73.100.30
Equipment for drilling and mine excavation
|
| ISO 18758-2:2018 |
Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
This document specifies the safety requirements for rock drill rigs and rock reinforcement rigs designed for the following underground or surface operations:
a) blast hole drilling;
b) rock reinforcement;
c) drilling for secondary breaking;
d) dimensional stone drilling;
e) mineral prospecting, e.g. utilizing core drilling or reverse circulation;
f) water and methane drainage drilling;
g) raise boring.
NOTE Rigs can be designed for more than one of the operations above. See ISO 18758-1 for vocabulary.
This document is also applicable to earth-moving machinery as defined in ISO 6165, modified to become a rock drill rig or rock reinforcement rig.
This document is not applicable to the following machines: drill rigs for soil and rock mixture; (geothermal drill rigs, water well drill rigs, water jet drill rigs, micro pile drill rigs; surface horizontal directional drill rigs (HDD) as defined in ISO 21467), kelly drill rigs (and casing drivers); cable tool drill rigs; pre-armouring machines; sonic drill rigs; shaft sinking drill rigs; crane attached drill rigs; drill rigs on derricks; scaling machines.
This document deals with the significant hazards, hazardous situations or hazardous events, as listed in Annex E, relevant to rock drill rigs and rock reinforcement rigs (see ISO 18758‑1), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
This document is not applicable to rigs manufactured before the date of its publication.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 57 |
Technical Committee |
53.100
Earth-moving machinery
;
73.100.30
Equipment for drilling and mine excavation
|
| ISO 19224:2017 |
Continuous surface miners (CSM) — Safety requirements |
ISO 19224:2017 deals with safety requirements for continuous surface miners (CSM). It specifies common requirements for the design and construction of CSM to protect workers from accidents and health hazards that can occur during operation, loading, transport and maintenance.
ISO 19224:2017 deals with known significant hazards, hazardous situations or hazardous events relevant to CSM, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
ISO 19224:2017 also specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards as identified in Annex A.
ISO 19224:2017 is not applicable to CSM manufactured before the date of its publication.
|
Published |
2017-09 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 19225:2017 |
Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems |
ISO 19225:2017 specifies safety requirements to minimize the hazards listed in Clause 4 that can occur during the assembly, use, maintenance, repair, decommissioning, disassembly and disposal of shearer loaders and plough systems when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, in underground mining.
ISO 19225:2017 does not cover any hazards resulting from explosive atmospheres. Requirements for explosive atmospheres can be found in ISO/IEC 80079‑38.
ISO 19225:2017 is not applicable to machines that are manufactured before the date of its publication.
|
Published |
2017-05 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 19225:2017/Amd 1:2019 |
Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems — Amendment 1 |
|
Published |
2019-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
73.100.30
Equipment for drilling and mine excavation
|
| ISO 2289:1972 |
Rotary drilling equipment — Kellys |
|
Withdrawn |
1972-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 2644:1975 |
Materials and equipment for petroleum and natural gas industries — Steel drill pipe for oil or natural gas wells |
|
Withdrawn |
1975-06 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 2645:1975 |
Materials and equipment for petroleum and natural gas industries — Casing and tubing for oil or natural gas wells |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 43 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 3395:1975 |
Rotary drilling equipment — Roller bits and blade drag bits |
|
Withdrawn |
1975-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 3396:1975 |
Rotary drilling equipment — Diamond drilling bits and diamond core bits |
|
Withdrawn |
1975-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 3421:2022 |
Petroleum and natural gas industries — Drilling and production equipment — Offshore conductor design, setting depth and installation |
This document specifies the requirements and recommendations for the design, setting depth and installation of conductors for the offshore petroleum and natural gas industries. This document specifically addresses:
— design of the conductor, i.e. determination of the diameter, wall thickness, and steel grade;
— determination of the setting depth for three installation methods, namely, driving, drilling and cementing, and jetting;
— requirements for the three installation methods, including applicability, procedures, and documentation and quality control.
This document is applicable to:
— platform conductors: installed through a guide hole in the platform drill floor and then through guides attached to the jacket at intervals through the water column to support the conductor, withstand actions, and prevent excessive displacements;
— jack-up supported conductors: a temporary conductor used only during drilling operations, which is installed by a jack-up drilling rig. In some cases, the conductor is tensioned by tensioners attached to the drilling rig;
— free-standing conductors: a self-supporting conductor in cantilever mode installed in shallow water, typically water depths of about 10 m to 20 m. It provides sole support for the well and sometimes supports a small access deck and boat landing;
— subsea wellhead conductors: a fully submerged conductor extending only a few metres above the sea floor to which a BOP and drilling riser are attached. The drilling riser is connected to a floating drilling rig. The BOP, riser and rig are subject to wave and current actions while the riser can also be subject to VIV.
This document is not applicable to the design of drilling risers.
|
Published |
2022-06 |
Edition : 1 |
Number of pages : 36 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 3962:1977 |
Materials and equipment for petroleum and natural gas industries — Tool joints for steel drill pipe for oil or natural gas wells |
|
Withdrawn |
1977-10 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 3977-5:2001 |
Gas turbines — Procurement — Part 5: Applications for petroleum and natural gas industries |
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
27.040
Gas and steam turbines. Steam engines
;
75.180.10
Exploratory, drilling and extraction equipment
;
75.180.20
Processing equipment
|
| ISO 4041:1978 |
Rotary drilling equipment — Rotary hoses |
|
Withdrawn |
1978-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 5225:1983 |
Rotary drilling equipment — List of equivalent terms |
|
Withdrawn |
1983-07 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 5226:1985 |
Materials and equipment for petroleum and natural gas industries — Aluminium alloy drill pipe for oil or natural gas wells |
|
Withdrawn |
1985-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.150.10
Aluminium products
|
| ISO 5229:1982 |
Rotary drilling equipment — Rotary tables |
|
Withdrawn |
1982-11 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO/CD 6398-1 |
Petroleum and natural gas industries — Submersible linear motor systems for artificial lift — Part 1: Submersible linear motors |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 6807:1984 |
Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification |
Requirements for textile- and steel-reinforced hoses are specified for use with water- and/or oil-based muds with a minimum aniline point of 66 °C pumped at high pressure in large volumes. The hoses are suitable for use at temperatures up to 80 °C and are reistant to ageing, to tropical conditions and to ambient temperatures down to -30 °C. 3 tables and 1 figure give detailed requirements.
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
83.140.40
Hoses
|
| ISO 6807:2003 |
Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification |
ISO 6807:2003 specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C.
This International Standard applies to hoses which are suitable for use at ambient temperatures between -20 °C and +52 °C, unless changed by a supplementary requirement on request of the purchaser, and are resistant to ageing and tropical conditions.
This International Standard does not apply to hoses which are intended for use with gases.
|
Published |
2003-12 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
83.140.40
Hoses
|
| ISO 10400:1993 |
Petroleum and natural gas industries — Formulae and calculation for casing, tubing, drill pipe and line pipe properties |
Establishes the formulae. Requirements are specified in the fifth edition of API BULLETIN 5C3 (Bul 5C3), Juli 1989, which is adopted as ISO 10400. For the purposes of international standardization, modifications have been made that are outlined.
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO/TR 10400:2007 |
Petroleum and natural gas industries — Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
ISO/TR 10400:2007 illustrates the equations and templates necessary to calculate the various pipe properties given in International Standards, including pipe performance properties, such as axial strength, internal pressure resistance and collapse resistance, minimum physical properties, product assembly force (torque), product test pressures, critical product dimensions related to testing criteria, critical dimensions of testing equipment, and critical dimensions of test samples.
For equations related to performance properties, extensive background information is also provided regarding their development and use.
Equations presented in ISO/TR 10400:2007 are intended for use with pipe manufactured in accordance with ISO 11960 or API 5CT, ISO 11961 or API 5D, and ISO 3183 or API 5L, as applicable. These equations and templates may be extended to other pipe with due caution. Pipe cold-worked during production is included in the scope of this Technical Report (e.g. cold rotary straightened pipe). Pipe modified by cold working after production, such as expandable tubulars and coiled tubing, is beyond the scope of this Technical Report.
Application of performance property equations in ISO/TR 10400:2007 to line pipe and other pipe is restricted to their use as casing/tubing in a well or laboratory test, and requires due caution to match the heat-treat process, straightening process, yield strength, etc., with the closest appropriate casing/tubing product. Similar caution should be exercised when using the performance equations for drill pipe.
ISO/TR 10400:2007 and the equations contained herein relate the input pipe manufacturing parameters in ISO 11960 or API 5CT, ISO 11961 or API 5, and ISO 3183 or API 5L to expected pipe performance. The design equations in ISO/TR 10400:2007 are not to be understood as a manufacturing warrantee. Manufacturers are typically licensed to produce tubular products in accordance with manufacturing specifications which control the dimensions and physical properties of their product. Design equations, on the other hand, are a reference point for users to characterize tubular performance and begin their own well design or research of pipe input properties.
ISO/TR 10400:2007 is not a design code. It only provides equations and templates for calculating the properties of tubulars intended for use in downhole applications. ISO/TR 10400:2007 does not provide any guidance about loads that may be encountered by tubulars or about safety margins needed for acceptable design. Users are responsible for defining appropriate design loads and selecting adequate safety factors to develop safe and efficient designs. The design loads and safety factors will likely be selected based on historical practice, local regulatory requirements, and specific well conditions.
All equations and listed values for performance properties in ISO/TR 10400:2007 assume a benign environment and material properties conforming to ISO 11960 or API 5CT, ISO 11961 or API 5D, and ISO 3183 or API 5L. Other environments may require additional analyses, such as that outlined in Annex D.
Pipe performance properties under dynamic loads and pipe connection sealing resistance are excluded from the scope of ISO/TR 10400:2007.
|
Withdrawn |
2007-12 |
Edition : 1 |
Number of pages : 229 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO/TR 10400:2018 |
Petroleum and natural gas industries — Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
This document illustrates the formulae and templates necessary to calculate the various pipe properties given in International Standards, including
— pipe performance properties, such as axial strength, internal pressure resistance and collapse resistance,
— minimum physical properties,
— product assembly force (torque),
— product test pressures,
— critical product dimensions related to testing criteria,
— critical dimensions of testing equipment, and
— critical dimensions of test samples.
For formulae related to performance properties, extensive background information is also provided regarding their development and use.
Formulae presented here are intended for use with pipe manufactured in accordance with ISO 11960 or API 5CT, ISO 11961 or API 5D, and ISO 3183 or API 5L, as applicable. These formulae and templates can be extended to other pipe with due caution. Pipe cold-worked during production is included in the scope of this document (e.g. cold rotary straightened pipe). Pipe modified by cold working after production, such as expandable tubulars and coiled tubing, is beyond the scope of this document.
Application of performance property formulae in this document to line pipe and other pipe is restricted to their use as casing/tubing in a well or laboratory test, and requires due caution to match the heat-treat process, straightening process, yield strength, etc., with the closest appropriate casing/tubing product. Similar caution is exercised when using the performance formulae for drill pipe.
This document and the formulae contained herein relate the input pipe manufacturing parameters in ISO 11960 or API 5CT, ISO 11961 or API 5D, and ISO 3183 or API 5L to expected pipe performance. The design formulae in this document are not to be understood as a manufacturing warranty. Manufacturers are typically licensed to produce tubular products in accordance with manufacturing specifications which control the dimensions and physical properties of their product. Design formulae, on the other hand, are a reference point for users to characterize tubular performance and begin their own well design or research of pipe input properties.
This document is not a design code. It only provides formulae and templates for calculating the properties of tubulars intended for use in downhole applications. This document does not provide any guidance about loads that can be encountered by tubulars or about safety margins needed for acceptable design. Users are responsible for defining appropriate design loads and selecting adequate safety factors to develop safe and efficient designs. The design loads and safety factors will likely be selected based on historical practice, local regulatory requirements, and specific well conditions.
All formulae and listed values for performance properties in this document assume a benign environment and material properties conforming to ISO 11960 or API 5CT, ISO 11961 or API 5D and ISO 3183 or API 5L. Other environments can require additional analyses, such as that outlined in Annex D.
Pipe performance properties under dynamic loads and pipe connection sealing resistance are excluded from the scope of this document.
Throughout this document tensile stresses are positive.
|
Published |
2018-08 |
Edition : 2 |
Number of pages : 229 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10405:1993 |
Petroleum and natural gas industries — Care and use of casing and tubing |
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 50 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10405:2000 |
Petroleum and natural gas industries — Care and use of casing and tubing |
|
Published |
2000-03 |
Edition : 2 |
Number of pages : 39 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10407-2:2008 |
Petroleum and natural gas industries — Rotary drilling equipment — Part 2: Inspection and classification of used drill stem elements |
ISO 10407-2:2008 specifies the required inspection for each level of inspection and procedures for the inspection and testing of used drill-stem elements. For the purpose of ISO 10407-2:2008, drill stem elements include drill pipe body, tool joints, rotary-shouldered connections, drill collar, HWDP and the ends of drill-stem elements that make up with them. ISO 10407-2:2008 has been prepared to address the practices and technology commonly used in inspection.
The practices established within ISO 10407-2:2008 are intended as inspection and/or testing guidance and are not intended to be interpreted to prohibit the agency or owner from using personal judgement, supplementing the inspection with other techniques, extending existing techniques or re‑inspecting certain lengths.
ISO 10407-2:2008 specifies the qualification of inspection personnel, a description of inspection methods and apparatus calibration and standardization procedures for various inspection methods. The evaluation of imperfections and the marking of inspected drill stem elements is included.
ISO 10407-2:2008 provides the original equipment manufacturers' requirements regarding the minimum information needed for the inspection of their specialized tools.
|
Published |
2008-10 |
Edition : 1 |
Number of pages : 213 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10407-2:2008/Cor 1:2009 |
Petroleum and natural gas industries — Rotary drilling equipment — Part 2: Inspection and classification of used drill stem elements — Technical Corrigendum 1 |
|
Published |
2009-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10407:1993 |
Petroleum and natural gas industries — Drilling and production equipment — Drill stem design and operating limits |
Lays down the properties and establishes principles for the design and use. Requirements are specified in the fourteenth edition of API Recommended Practice 7G (RP 7G), August 1990, which is adopted as ISO 10407. For the purposes of international standardization, modifications have been made that are outlined.
|
Published |
1993-12 |
Edition : 1 |
Number of pages : 92 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10409:1993 |
Petroleum and natural gas industries — Application of cement lining to steel tubular goods, handling, installation and joining |
Lays down the minimum requirements. Requirements are specified in the second edition of API Recommended Practice 10E (RP 10E), July 1987, which is adopted as ISO 10409. For the purposes of international standardization, modifications have been made that are outlined.
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10261:2002/Amd 1:2015 |
Earth-moving machinery — Product identification numbering system — Amendment 1 |
|
Withdrawn |
2015-11 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 10414-1:2008 |
Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids |
ISO 10414-1:2008 provides standard procedures for determining the following characteristics of water-based drilling fluids: drilling fluid density (mud weight), viscosity and gel strength, filtration, water, oil and solids contents, sand content, methylene blue capacity, pH, alkalinity and lime content, chloride content and total hardness as calcium.
ISO 10414-1:2008 provides additional test methods which may be used for chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium; determination of shear strength; determination of resistivity; removal of air drill-pipe corrosion; monitoring sampling, inspection and rejection rig-site sampling; calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances; permeability-plugging testing at high temperature and high pressure for two types of equipment; and an example of a report form for water-based drilling fluid.
|
Published |
2008-03 |
Edition : 2 |
Number of pages : 91 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10414-2:2002 |
Petroleum and natural gas industries — Field testing of drilling fluids — Part 2: Oil-based fluids |
ISO 10414-2:2002 provides standard procedures for determining the following characteristics of oil-based drilling fluids:
drilling fluid density (mud weight);viscosity and gel strength;filtration;oil, water and solids contents;alkalinity, chloride content and calcium content;electrical stability;lime and calcium contents, calcium chloride and sodium chloride contents;low-gravity solids and weighting material contents.
Additional test methods are given that may optionally be used for the determination of
shear strength,oil and water contents from cuttings,drilling fluid activity,aniline point,cuttings activity,active sulfides.
Procedures are also provided that may optionally be used for
sampling, inspection and rejection,rig-site sampling,calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances.
Examples of calculations are given for lime, salinity and solids content.
|
Withdrawn |
2002-07 |
Edition : 1 |
Number of pages : 72 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10414-2:2011 |
Petroleum and natural gas industries — Field testing of drilling fluids — Part 2: Oil-based fluids |
ISO 10414-2:2011 provides standard procedures for determining the following characteristics of oil-based drilling fluids:
drilling fluid density (mud weight);
viscosity and gel strength;
filtration;
oil, water and solids concentrations;
alkalinity, chloride concentration and calcium concentration;
electrical stability;
lime and calcium concentrations, calcium chloride and sodium chloride concentrations;
low-gravity solids and weighting material concentrations.
The annexes provide additional test methods or examples that can optionally be used for the determination of:
shear strength
oil and water concentrations from cuttings;
drilling fluid activity;
aniline point;
lime, salinity and solids concentration;
sampling, inspection and rejection;
rig-site sampling;
cuttings activity;
active sulphides;
calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances;
permeability plugging apparatus with set-screw secured end cap;
permeability plugging apparatus with threaded end cap;
elastomer compatibility;
sand content of oil-based fluid;
identification and monitoring of weight-material sag;
oil-based drilling fluid test report form.
|
Published |
2011-06 |
Edition : 2 |
Number of pages : 157 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10416:2002 |
Petroleum and natural gas industries — Drilling fluids — Laboratory testing |
ISO 10416:2002 provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up fluid.
It is not intended as a detailed manual on drilling fluid control procedures. Recommendations regarding agitation and testing temperature are presented because the agitation history and temperature have a profound effect on drilling fluid properties.
|
Withdrawn |
2002-12 |
Edition : 1 |
Number of pages : 105 |
Technical Committee |
75.100
Lubricants, industrial oils and related products
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10416:2008 |
Petroleum and natural gas industries — Drilling fluids — Laboratory testing |
ISO 10416:2008 provides procedures for the laboratory testing of both drilling-fluid materials and drilling-fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or “make-up” fluid.
ISO 10416:2008 is not applicable as a detailed manual on drilling fluid control procedures. Recommendations regarding agitation and testing temperature are presented because the agitation history and temperature have a profound effect on drilling fluid properties.
|
Published |
2008-06 |
Edition : 2 |
Number of pages : 109 |
Technical Committee |
75.100
Lubricants, industrial oils and related products
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10417:1993 |
Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and repair |
Lays down the recommended practice. Requirements are specified in the third edition of API Recommended Practice 14B (RP 14B), January 1990, which is adopted as ISO 10417. For the purposes of international standardization, modifications have been made that are outlined.
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10417:2004 |
Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and redress |
ISO 10417:2004 establishes requirements and provides guidelines for configuration, installation, test, operation and documentation of subsurface safety valve (SSSV) systems. In addition, ISO 10417:2004 establishes requirements and provides guidelines for selection, handling, redress and documentation of SSSV downhole production equipment.
ISO 10417:2004 is not applicable to repair activities. ISO 10432 provides requirements for SSSV equipment repair.
|
Published |
2004-07 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10418:1993 |
Petroleum and natural gas industries — Offshore production platforms — Analysis, design, installation and testing of basic surface safety systems |
Lays down the recommended practice. Requirements are specified in the fourth edition of API Recommended Practice 14C (RP 14C), September 1986, which is adopted as ISO 10418. For the purposes of international standardization, modifications have been made that are outlined.
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 91 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10418:2003 |
Petroleum and natural gas industries — Offshore production installations — Analysis, design, installation and testing of basic surface process safety systems |
ISO 10418:2003 provides objectives, functional requirements and guidelines for techniques for the analysis, design and testing of surface process safety systems for offshore installations for the recovery of hydrocarbon resources. The basic concepts associated with the analysis and design of a process safety system for an offshore oil and gas production facility are described, together with examples of the application to typical (simple) process components. These examples are contained in the annexes of ISO 10418:2003.
ISO 10418:2003 is applicable to fixed offshore structures, floating production, storage and off-take systems for the petroleum and natural gas industries.
ISO 10418:2003 is not applicable to mobile offshore units and subsea installations, although many of the principles contained in it may be used as guidance.
|
Withdrawn |
2003-10 |
Edition : 2 |
Number of pages : 107 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10418:2003/Cor 1:2008 |
Petroleum and natural gas industries — Offshore production installations — Analysis, design, installation and testing of basic surface process safety systems — Technical Corrigendum 1 |
|
Withdrawn |
2008-03 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10418:2019 |
Petroleum and natural gas industries — Offshore production installations — Process safety systems |
This document provides objectives, functional requirements and guidelines for techniques for the analysis and design of surface process safety systems for offshore installations used for the recovery of hydrocarbon resources.
It also provides recommendations and requirements on support systems which complement the process safety systems in reducing risk.
NOTE These are not intended to be exhaustive.
The scope of this document is limited to specifying the methods by which the asset is protected against loss of containment of hydrocarbon or other hazardous materials.
This document is applicable to
a) fixed offshore structures, and
b) floating offshore production installations
for the petroleum and natural gas industries.
This document is not applicable to mobile offshore units and subsea installations.
NOTE Nevertheless, many of the principles contained in this document can be used as guidance.
|
Published |
2019-05 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10419:1993 |
Petroleum and natural gas industries — Drilling and production equipment — Installation, maintenance and repair of surface safety valves and underwater safety valves offshore |
Provides guidance for inspecting, installing, operating, maintaining and repairing surface safety valves and underwater safety valves. Requirements are specified in API Recommended Practice 14H (RP 14H), third edition, August 1, 1991 which is adopted as ISO 10419. For the purposes of international standardization, modifications shall apply to specific clauses and paragraphs of API RP 14H. These modifications are outlined.
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10422:1993 |
Petroleum and natural gas industries — Threading, gauging, and thread inspection of casing, tubing and line pipe threads — Specification |
Specifies dimensional requirements on thread and thread gauges, and covers the instruments and methods for the inspection of threads for line pipe, casing and tubing. Requirements are specified in API Specification STD 5B (STD 5B), thirteenth edition, May 31, 1988 which is adopted as ISO 10422. For the purposes of international standardization, modifications shall apply to specific clauses and paragraphs of API STD 5B. These modifications are outlined.
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 126 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10423:1994 |
Petroleum and natural gas industries — Drilling and production equipment — Specification for valves, wellhead and Christmas tree equipment |
Provides for the availability of safe, dimensionally and functionally interchangeable wellhead and christmas tree equipment by laying down the requirements for performance, design, materials, testing, inspections, welding, marking, handling, storing and shipping.
|
Withdrawn |
1994-07 |
Edition : 1 |
Number of pages : 227 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10423:2003 |
Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas tree equipment |
ISO 10423:2003 specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and christmas tree equipment for use in the petroleum and natural gas industries.
ISO 10423:2003 does not apply to field use, field testing or field repair of wellhead and christmas tree equipment.
ISO 10423:2003 is applicable to wellhead equipment (casing head housings, casing head spools, tubing head spools, cross-over spools, multi-stage head housings and spools), connectors and fittings (cross-over connectors, tubing head adapters, top connectors, tees and crosses, fluid-sampling devices, adapter and spacer spools), casing and tubing hangers (mandrel hangers, slip hangers), valves and chokes (single valves, multiple valves, actuated valves, valves prepared for actuators, check valves, chokes, surface and underwater safety valves and actuators, back-pressure valves), loose connectors [flanged, threaded, other end connectors (oec), and welded] (weld neck connectors, blind connectors, threaded connectors, adapter and spacer connectors, bullplugs, valve-removal plugs), other equipment (actuators, hubs, pressure boundary penetrations, ring gaskets, running and testing tools, wear bushings).
ISO 10423:2003 defines service conditions, in terms of pressure, temperature and material class for the well-bore constituents, and operating conditions.
ISO 10423:2003 establishes requirements for five product specification levels (PSL). These five PSL designations define different levels of technical quality requirements. It also provides guidelines (not requirements) for selecting an acceptable PSL.
|
Withdrawn |
2003-12 |
Edition : 3 |
Number of pages : 403 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10423:2009 |
Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas tree equipment |
ISO 10423:2009 specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and christmas tree equipment for use in the petroleum and natural gas industries.
ISO 10423:2009 does not apply to field use, field testing or field repair of wellhead and christmas tree equipment.
ISO 10423:2009 is applicable to specific types of wellhead equipment, connectors and fittings; casing and tubing hangers; valves and chokes; loose connectors [flanged, threaded, other end connectors (OEC), and welded]; and other equipment, such as actuators, clamp hubs, pressure boundary penetrations, ring gaskets, running and testing tools and wear bushings.
The nomenclature is defined and most physical dimensions are given in USC as well as metric units.
ISO 10423:2009 defines service conditions, in terms of pressure, temperature and material class for the well-bore constituents, and operating conditions.
ISO 10423:2009 establishes requirements for five product specification levels, PSL 1, 2, 3, 3G and 4. These five PSL designations define different levels of technical quality requirements. Guidelines (not requirements) are provided for selecting an acceptable PSL.
|
Withdrawn |
2009-12 |
Edition : 4 |
Number of pages : 430 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10423:2022 |
Petroleum and natural gas industries — Drilling and production equipment — Wellhead and tree equipment |
This document specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, and purchasing of wellhead and tree equipment for use in the petroleum and natural gas industries.
This document does not apply to field use or field testing.
This document does not apply to repair of wellhead and tree equipment except for weld repair in conjunction with manufacturing.
This document does not apply to tools used for installation and service (e.g. running tools, test tools, wash tools, wear bushings, and lubricators).
This document supplements API Spec 6A, 21st edition (2018), the requirements of which are applicable with the exceptions specified in this document.
|
Published |
2022-03 |
Edition : 5 |
Number of pages : 4 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10424-1:2004 |
Petroleum and natural gas industries — Rotary drilling equipment — Part 1: Rotary drill stem elements |
ISO 10424-1:2004 specifies requirements for the following drill stem elements: upper and lower kelly valves; square and hexagonal kellys; drill stem subs; standard steel and non-magnetic drill collars; drilling and coring bits.
ISO 10424-1:2004 is not applicable to drill pipe and tool joints, rotary shouldered connection designs, thread gauging practice, or grand master, reference master and working gauges.
|
Published |
2004-09 |
Edition : 1 |
Number of pages : 66 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10424-2:2007 |
Petroleum and natural gas industries — Rotary drilling equipment — Part 2: Threading and gauging of rotary shouldered thread connections |
ISO 10424-2:2007 specifies requirements on rotary shouldered connections for use in petroleum and natural gas industries, including dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as instruments and methods for inspection of thread connections. These connections are intended primarily for use in drill-string components.
Other supplementary specifications can be agreed between interested parties for special tolerance requirements, qualification, testing, inspection and finishing.
ISO 10424-2:2007 is applicable to the following preferred rotary shouldered connection designs: number (NC) style; regular (REG) style; full hole (FH) style. These are traceable to an internationally supported system of gauges and calibration.
|
Published |
2007-11 |
Edition : 1 |
Number of pages : 99 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10425:2003 |
Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance |
ISO 10425:2003 specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2 160 for the petroleum and natural gas industries.
|
Published |
2003-08 |
Edition : 1 |
Number of pages : 56 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.65
Steel wire, wire ropes and link chains
|
| ISO/DIS 10425 |
Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance |
ISO 10425:2003 specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2 160 for the petroleum and natural gas industries.
|
Under development |
|
Edition : 2 |
Number of pages : 79 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.65
Steel wire, wire ropes and link chains
|
| ISO 10427-1:2001 |
Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers |
This part of ISO 10427 provides minimum performance requirements, test procedures and marking requirements
for casing bow-spring centralizers for the petroleum and natural gas industries. The procedures provide verification
testing for the manufacturer's design, materials and process specifications, and periodic testing to confirm the
consistency of product performance.
This part of ISO 10427 is not applicable to rigid or positive centralizers.
|
Published |
2001-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10427-2:2004 |
Petroleum and natural gas industries — Equipment for well cementing — Part 2: Centralizer placement and stop-collar testing |
ISO 10427-2:2004 provides calculations for determining centralizer spacing, based on centralizer performance and desired standoff, in deviated and dogleg holes in wells for the petroleum and natural gas industries. It also provides a procedure for testing stop collars and reporting test results.
|
Published |
2004-05 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10427-3:2003 |
Petroleum and natural gas industries — Equipment for well cementing — Part 3: Performance testing of cementing float equipment |
ISO 10427-3:2003 describes testing practices to evaluate the performance of cementing float equipment for the petroleum and natural gas industries.
ISO 10427-3:2003 is applicable to float equipment that will be in contact with water-based fluids used for drilling and cementing wells. It is not applicable to float equipment performance in non-water-based fluids.
|
Published |
2003-04 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10427:1993 |
Petroleum and natural gas industries — Bow-spring casing centralizers — Specification |
Specifies testing procedures to verify the manufacturer's design, the materials and process for the construction. Requirements are specified in the fourth edition of API Specification 10D (Spec 10D), Januar 1991, which is adopted as ISO 10427. For the purposes of international standardization, modifications have been made that are outlined.
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10428:1993 |
Petroleum and natural gas industries — Sucker rods (pony rods, polished rods, couplings and sub-couplings) — Specification |
Specifies the requirements for the dimensional characteristics, chemical and mechanical properties and gauging practice. Requirements are specified in the twenty-forth edition of API Specification 11B (Spec 11B), October 1990, which is adopted as ISO 10428. For the purposes of international standardization, modifications have been made that are outlined.
|
Published |
1993-12 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10431:1993 |
Petroleum and natural gas industries — Pumping units — Specification |
Lays down the specification covering the design and rating. Specifies the requirements for the dimensional characteristics, chemical and mechanical properties and gauging practice. Requirements are specified in the sixteenth edition of API Specification 11E (Spec 11E), October 1989, which is adopted as ISO 10431. For the purposes of international standardization, modifications have been made that are outlined.
|
Published |
1993-12 |
Edition : 1 |
Number of pages : 53 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10432:1993 |
Petroleum and natural gas industries — Subsurface safety valve equipment — Specification |
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 55 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10432:1999 |
Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment |
La présente Norme internationale a été élaborée à fin de définir les exigences minimales acceptables pour les équipements de vannes de sécurité de fond (SSSV). Elle concerne les vannes de sécurité de fond, les systèmes les performances ou l'interchangeabilité des équipements des vannes de sécurité de fond. Les systèmes de verrouillage, les mandrins d'ancrage et les vannes de sécurité de fond fabriqués par différents établissements industriels ou constructeurs peuvent être fournis séparément. NOTE: Restrictions : La vanne de sécurité de fond est un équipement de sécurité d'urgence et n'est pas prévue ou conçue pour réaliser des opérations courantes d'exploitation telles que le dusage de la production ou de l'injection, les arrêts programmés de production ou comme clapet anti-retour.
|
Withdrawn |
1999-11 |
Edition : 2 |
Number of pages : 73 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10432:2004 |
Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment |
ISO 10432:2004 provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit.
Redress activities are beyond the scope of ISO 10432:2004.
|
Published |
2004-12 |
Edition : 3 |
Number of pages : 77 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10433:1994 |
Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
Requirements are specified in API Specification 14D (API Spec 14D), ninth edition, June 1 1994, which is adopted as ISO 10433. For the purposes of international standardization, however, modifications shall apply to specific clauses and paragraphs of publication API Spec 14D. These modifications are outlined.
|
Withdrawn |
1994-03 |
Edition : 1 |
Number of pages : 66 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10855-1:2018 |
Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers |
This document specifies requirements for the design, manufacture and marking of offshore containers with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships.
This document specifies only transport-related requirements.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10855-2:2018 |
Offshore containers and associated lifting sets — Part 2: Design, manufacture and marking of lifting sets |
This document specifies requirements for lifting sets for use with containers in offshore service, including technical requirements, marking and statements of conformity for single and multi-leg slings, including chain slings and wire rope slings.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 10855-3:2018 |
Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing |
This document specifies requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with ISO 10855‑1, with maximum a gross mass not exceeding 25 000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included.
Recommended knowledge and experience of staff responsible for inspection of offshore containers is given in Annex B.
Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers is given in Annex C.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 11960:1996 |
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells |
Specifies the technical delivery conditions for steel pipes (casing, tubing for wells), connectors, couplings and thread protectors. Theading requirements are not considered. Dimensional requirements on threads are given in ISO 10422. Replaces ISO 2645:1975.
|
Withdrawn |
1996-06 |
Edition : 1 |
Number of pages : 87 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11960:2001 |
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells |
La présente Norme Internationale est applicable aux assemblages suivants conformément à l'ISO 10422 ou à l'API Spec 5B : - tube de cuvelage à filetage rond court (STC) - tube de cuvelage à filetage rond long (LC) - tube de cuvelage à filetage Buttress (BC) - tubes de cuvelage extreme-line (XC) ; - tube de production sans refoulement (NU) - tube de production à refoulement extérieur (EU) - tube de production à joint intégral (W). Pour ces assemblages, la présente Norme Internationale spécifie les conditions techniques de livraison des manchons et des protecteurs de filetage. Pour les tubes couverts par la présente Norme internationale, les éléments suivants sont définis : dimensions, masses, épaisseurs, grades et types de finition d'extrémité applicables. La présente Norme Internationale peut être aussi appliquée à des produits tubulaires avec des assemblages non définis dans des normes ISO/API. Les quatre groupes de produits, auxquels la présente Norme internationale est applicable, comprennent les nuances suivantes : - Groupe 1 Tous les tubes de cuvelage et de production de nuances H, J, K et N - Groupe 2 Tous les tubes de cuvelage et de production de nuances C, L, M et T - Groupe 3 Tous les tubes de cuvelage et de production de nuance P - Groupe 4 Tous les tubes de cuvelage de nuance Q. Les dimensions de tubes de cuvelage supérieures à Label 1:4-1/2 mais inférieures à Label 1:10-3/4 peuvent être spécifiées par l'acheteur en tant que «service comme tubes de production» ; voir les Tableaux CA, C.24, C.30 et C.31 ou les Tableaux E.1, E.24, E.30 et E.31.
|
Withdrawn |
2001-10 |
Edition : 2 |
Number of pages : 235 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11960:2001/Cor 1:2002 |
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells — Technical Corrigendum 1 |
|
Withdrawn |
2002-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 7221:1984 |
Shipbuilding and marine structures — Shipborne barges, series 1, on barge carriers — Principal technical requirements |
Specifies the requirements for their loading, unloading and transport on board barge carriers.
|
Published |
1984-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 11960:2004 |
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells |
ISO 11960:2004 specifies the technical delivery conditions for steel pipes (casing, tubing, plain end casing liners and pup joints), coupling stock and accessories and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2004. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40 and L-80 9Cr, are contained in Annex H.
ISO 11960:2004 is applicable to the following connections in accordance with API Spec 5B:
-- short round thread casing (STC);
-- long round thread casing (LC);
-- buttress thread casing (BC);
-- extreme-line casing (XC);
-- non-upset tubing (NU);
-- external upset tubing (EU);
-- integral joint tubing (IJ).
For such connections, ISO 11960:2004 specifies the technical delivery conditions for couplings and thread protection. Supplementary requirements that may optionally be agreed for enhanced leak resistance connections are given in Annex A.11 (SR22).
ISO 11960:2004 can also be applied to tubulars with connections not covered by ISO/API standards.
For pipes covered by ISO 11960:2004, the sizes, masses and wall thicknesses as well as grades and applicable end finishes are given.
By agreement between the purchaser and manufacturer, ISO 11960:2004 can also be applied to other plain end pipe sizes and wall thicknesses.
The four groups of products to which ISO 11960:2004 is applicable include the following grades of pipe:
-- Group 1: All casing and tubing in Grades H, J, K and N;
-- Group 2: All casing and tubing in Grades C, L, M and T;
-- Group 3: All casing and tubing in Grade P;
-- Group 4: All casing in Grade Q.
Casing sizes larger than Label 1: 4-1/2 but smaller than Label 1: 10-3/4 may be specified by the purchaser to be used in tubing service.
Supplementary requirements that may optionally be agreed between purchaser and manufacturer for non-destructive examination, coupling blanks, upset casing, electric-welded casing, impact testing, seal ring couplings and certificates are given in Annex A.
ISO 11960:2004 is not applicable to threading requirements.
|
Withdrawn |
2004-12 |
Edition : 3 |
Number of pages : 291 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11960:2004/Cor 1:2006 |
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells — Technical Corrigendum 1 |
|
Withdrawn |
2006-05 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11960:2011 |
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells |
ISO 11960:2010 specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three product specification levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2010. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all grades except H-40, L-80 9Cr and C110, are contained in Annex H.
For pipes covered by ISO 11960:2010, the sizes, masses and wall thicknesses as well as grades and applicable end-finishes are listed.
By agreement between the purchaser and manufacturer, ISO 11960:2010 can also be applied to other plain-end pipe sizes and wall thicknesses.
ISO 11960:2010 is applicable to the following connections in accordance with API Spec 5B: short round thread casing (SC), long round thread casing (LC), buttress thread casing (BC), non-upset tubing (NU), external upset tubing (EU) and integral tubing connections (IJ).
For such connections, ISO 11960:2010 specifies the technical delivery conditions for couplings and thread protection. Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given.
ISO 11960:2010 can also be applied to tubulars with connections not covered by ISO/API standards.
The four groups of products to which ISO 11960:2010 is applicable include the following grades of pipe: group 1, including all casing and tubing in grades H, J, K, N and R; group 2, including all casing and tubing in grades C, L, M and T; group 3, including all casing and tubing in grade P; and group 4, including all casing in grade Q.
Casing sizes larger than label 1: 4-1/2 but smaller than label 1: 10-3/4 can be specified by the purchaser for use in tubing service.
Supplementary requirements that can optionally be agreed between purchaser and manufacturer for non-destructive examination, fully machined coupling blanks, upset casing, electric-welded casing, tubing and pup joints, impact testing, seal ring couplings, test certificates, tensile testing and sulfide stress cracking testing are given.
ISO 11960:2010 is not applicable to threading requirements. Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as instruments and methods for inspection of threads are given in API Spec 5B.
|
Withdrawn |
2011-06 |
Edition : 4 |
Number of pages : 269 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11960:2014 |
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells |
ISO 11960:2014 specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2014. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H.
By agreement between the purchaser and manufacturer, ISO 11960:2014 can also be applied to other plain-end pipe sizes and wall thicknesses.
ISO 11960:2014 is applicable to the following connections in accordance with API Spec 5B:
short round thread casing (SC);
long round thread casing (LC);
buttress thread casing (BC);
non-upset tubing (NU);
external upset tubing (EU);
integral tubing (IJ).
ISO 11960:2014 can also be applied to tubulars with connections not covered by ISO/API standards.
The four groups of products to which ISO 11960:2014 is applicable include the following grades of pipe:
Group 1: All casing and tubing in Grades H, J, K, N and R;
Group 2: All casing and tubing in Grades C, L, M and T;
Group 3: All casing and tubing in Grade P;
Group 4: All casing in Grade Q.
Casing sizes larger than Label 1: 4-1/2 but smaller than Label 1: 10-3/4 can be specified by the purchaser to be used in tubing service.
|
Withdrawn |
2014-01 |
Edition : 5 |
Number of pages : 264 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11960:2020 |
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells |
This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material.
By agreement between the purchaser and manufacturer, this document can also be applied to other plain-end pipe sizes and wall thicknesses.
This document is applicable to the following connections:
— short round thread casing (SC);
— long round thread casing (LC);
— buttress thread casing (BC);
— non-upset tubing (NU);
— external upset tubing (EU);
— integral-joint tubing (IJ).
NOTE 1 For further information, see API Spec 5B.
For such connections, this document specifies the technical delivery conditions for couplings and thread protection.
NOTE 2 Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given in A.9 SR22.
This document can also be applied to tubulars with connections not covered by ISO or API standards.
This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80, C90, R95, T95, P110, C110 and Q125.
This document is not applicable to threading requirements.
NOTE 3 Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.
|
Published |
2020-03 |
Edition : 6 |
Number of pages : 267 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11961:1996 |
Petroleum and natural gas industries — Steel pipes for use as drill pipe — Specification |
Specifies the technical delivery conditions for steel drill pipes. Describes the group 1, all grade E pipes, and group 3, all drill pipes in high strength grades X95, G105 and S135.
|
Withdrawn |
1996-10 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11961:2008 |
Petroleum and natural gas industries — Steel drill pipe |
ISO 11961:2008 specifies the technical delivery conditions for steel drill pipes with upset pipe body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this ISO 11961:2008 but those that define different levels of standard technical requirements for PSL-2 and PSL-3 are also given.
ISO 11961:2008 covers grade E drill pipe and the high-strength grades X, G and S.
A typical drill pipe configuration is given, showing main elements and lengths. The main dimensions and masses of the grades of drill pipe are given in both SI units and in USC units.
ISO 11961:2008 can also be used for drill pipe with tool joints not specified by ISO or API standards.
By agreement between purchaser and manufacturer, ISO 11961:2008 can also be applied to other drill-pipe body and/or tool-joint dimensions. ISO 11961:2008 lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination.
ISO 11961:2008 does not consider performance properties.
|
Withdrawn |
2008-11 |
Edition : 2 |
Number of pages : 112 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11961:2008/Cor 1:2009 |
Petroleum and natural gas industries — Steel drill pipe — Technical Corrigendum 1 |
|
Withdrawn |
2009-03 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11961:2018 |
Petroleum and natural gas industries — Steel drill pipe |
This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this document. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following grades of drill-pipe:
— grade E drill-pipe;
— high-strength grades of drill-pipe, grades X, G and S;
— enhanced H2S resistance drill pipe, grades D and F.
A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in USC units (see Table C.1).
This document can also be used for drill-pipe with tool joints not specified by ISO or API standards.
By agreement between purchaser and manufacturer, this document can also be applied to other drill-pipe body and/or tool-joint dimensions. This document lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination (see Annex E).
This document does not consider performance properties, nor performance degradation of the product when in service.
NOTE 1 In this document, drill-pipe is designated by label 1, label 2, grade of material (E, X, G, S, D and F), upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in ordering.
NOTE 2 Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading of drill-pipe tool joints.
NOTE 3 Reference can be made to API RP 7G for the performance properties of the drill-pipe.
|
Published |
2018-10 |
Edition : 3 |
Number of pages : 108 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 11961:2018/Amd 1:2020 |
Petroleum and natural gas industries — Steel drill pipe — Amendment 1 |
|
Published |
2020-03 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO/FDIS 12736-1 |
Petroleum and natural gas industries — Wet thermal insulation systems for pipelines and subsea equipment — Part 1: Validation of materials and insulation systems |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
25.220.20
Surface treatment
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO/FDIS 12736-2 |
Petroleum and natural gas industries — Wet thermal insulation systems for pipelines and subsea equipment — Part 2: Qualification processes for production and application procedures |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
25.220.20
Surface treatment
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO/FDIS 12736-3 |
Petroleum and natural gas industries — Wet thermal insulation systems for pipelines and subsea equipment — Part 3: Interfaces between systems, field joint system, field repairs and prefabricated insulation |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
25.220.20
Surface treatment
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 13680:2000/Cor 1:2002 |
Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions — Technical Corrigendum 1 |
|
Withdrawn |
2002-01 |
Edition : 1 |
|
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.140.75
Steel pipes and tubes for specific use
|
| ISO 12736:2014 |
Petroleum and natural gas industries — Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
ISO 12736:2014 defines the minimum requirements for qualification, application, testing, handling, storage and transportation of new and existing wet thermal insulation systems for pipelines, flowlines, equipment and subsea structures in the petroleum and natural gas industries. The purpose of these systems is to provide external corrosion protection and thermal insulation.
ISO 12736:2014 is applicable to wet thermal insulation systems submerged in seawater.
ISO 12736:2014 is not applicable to thermal insulation in the annulus of a steel pipe-in-pipe system.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 74 |
Technical Committee |
25.220.20
Surface treatment
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO/PAS 12835:2013 |
Qualification of casing connections for thermal wells |
ISO/PAS 12835:2013 is intended for assessment of casing connections for those field applications in which the design of the casing-connection system is strain-based, and in which primary axial loading is on the casing-connection system driven by constrained thermal expansion, and in which that primary loading exceeds the casing-connection system's yield envelope. Consequently, ISO/PAS 12835:2013 should be considered as a protocol that is complementary to ISO 13679, which applies to classic elastic-design applications.
ISO/PAS 12835:2013 describes the structure of the Thermal Well Casing Connection Evaluation Protocol (TWCCEP) and provides guidelines for its use by new or repeat TWCCEP users, whose familiarity with the TWCCEP provisions might vary. Clause 6 describes fundamental assumptions adopted in the TWCCEP.
|
Withdrawn |
2013-12 |
Edition : 1 |
Number of pages : 142 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO/TS 12835:2022 |
Qualification of casing connections for thermal wells |
This document provides procedures for assessment of casing connections for those field applications in which the operating temperatures cyclically vary between minimum values appreciably below 180 °C and maximum values that range from 180 °C to 350 °C or above, and in which the primary axial loading on the casing-connection system is strain-based and driven by constrained thermal expansion and leads to a stress state that exceeds the casing-connection system's yield envelope.
NOTE This document can be considered complementary to ISO 13679 (and its core content per API Specification 5C5), which applies to classic elastic-design applications.
This document contains an evaluation procedure for a candidate connection comprising of uniquely defined pin, box and interfacial components. The evaluation procedure includes:
— Material property tests to assess relevant properties of the candidate connection pin and box components;
— Analytical tasks to determine configuration of connection samples for physical tests, which are chosen based on worst-case combinations of the connection geometry and material properties;
— Full-scale testing tasks to measure the candidate connection galling resistance, structural integrity and sealability under loading representative of connection assembly and thermal well service.
This document does not address impacts of external pressure, incomplete lateral pipe support, rotational fatigue, formation-induced shear, or environmentally-induced corrosion or cracking.
Clause 6 describes fundamental assumptions adopted in this document.
|
Published |
2022-03 |
Edition : 1 |
Number of pages : 163 |
Technical Committee |
75.200
Petroleum products and natural gas handling equipment
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 13085:2014 |
Petroleum and natural gas industries — Aluminium alloy pipe for use as tubing for wells |
ISO 13085:2014 specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy pipes for use as tubing for wells in petroleum and natural gas industries.
|
Published |
2014-03 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
;
77.150.10
Aluminium products
|
| ISO 13354:2014 |
Petroleum and natural gas industries — Drilling and production equipment — Shallow gas diverter equipment |
ISO 13354:2014 specifies requirements for the selection of the diverter equipment for rigs used to drill shallow-gas-bearing formations. It covers both onshore and offshore drilling operations, and considers also the auxiliary equipment associated with floating rigs.
The specified requirements concern the following diverter equipment:
annular sealing devices;
vent outlets;
diverter valves;
diverter piping.
ISO 13554:2014 highlights the concerns associated with the selection of a marine floating drilling support. It covers safety issues concerning key rig equipment, and important steps of action required prior to starting the drilling operations.
It provides only general guidelines regarding the response to be given to a shallow-gas flow.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 41 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 13500:1998 |
Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 66 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 13500:2006 |
Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests |
ISO 13500:2006 covers physical properties and test procedures for materials manufactured for use in oil-and gas-well drilling fluids. The materials covered are barite, haematite, bentonite, nontreated bentonite, OCMA grade bentonite, attapulgite, sepiolite, technical grade low-viscosity carboxymethylcellulose (CMC-LVT), technical grade high-viscosity carboxymethylcellulose (CMC-HVT), and starch. ISO 13500:2006 is intended for the use of manufacturers of named products.
|
Withdrawn |
2006-02 |
Edition : 2 |
Number of pages : 74 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 13500:2008 |
Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests |
ISO 13500:2008 covers physical properties and test procedures for materials manufactured for use in oil- and gas-well drilling fluids. The materials covered are barite, haematite, bentonite, nontreated bentonite, OCMA-grade bentonite, attapulgite, sepiolite, technical-grade low-viscosity carboxymethylcellulose (CMC‑LVT), technical-grade high-viscosity carboxymethylcellulose (CMC-HVT), starch, low-viscosity polyanionic cellulose (PAC-LV), high-viscosity polyanionic cellulose (PAC-HV) and drilling-grade Xanthomonas campestris (Xanthan gum).
ISO 13500:2008 is intended for the use of manufacturers of named products.
|
Published |
2008-11 |
Edition : 3 |
Number of pages : 93 |
Technical Committee |
75.180.10
Exploratory, drilling and extraction equipment
|