| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 3876:1977 |
Shipbuilding — Inland vessels — Hand-holes |
|
Withdrawn |
1977-01 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 3876:1986 |
Shipbuilding — Inland vessels — Hand-holes |
Specifies the dimensions and design of watertight and oiltight hand-holes for inland vessels.
|
Published |
1986-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 3913:1977 |
Shipbuilding — Welded steel bollards |
Lays down the material and principal dimensions for a range of nominal sizes 100 to 800 and states the maximum loading for which the bollards are intended. Construction and details of welding are not specified, but each manufacturer shall ensure that the bollards are capable of withstanding the test requirements specified.
|
Withdrawn |
1977-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 3913:1977/Add 1:1980 |
Shipbuilding — Welded steel bollards — Addendum 1: Double bollards for inland navigation |
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 3926:1980 |
Shipbuilding — Inland navigation — Couplings for oil and fuel reception — Mating dimensions |
Specifies three sizes of couplings with the following nominal sizes of pipes for vessels of various tonnage and types: DN 50; DN 80; DN 150 (for fuel only). Does not apply to the corresponding devices of cargo systems of vessels intended for the transportation of petroleum products.
|
Published |
1980-08 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 3935:1977 |
Shipbuilding — Inland navigation — Fire-fighting water system — Pressures |
Pressures are intended for standardization and selection of equipment, machinery and pipeline components for water systems for firefighting, viz. pumps, fittings, etc.
|
Withdrawn |
1977-01 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 3948:1977 |
Shipbuilding — Inland vessels — Compressed-air systems — Pressure ranges |
Is intended for selection of equipment, machinery and pipeline elements of systems providing operation of the following equipment: blast signals, pneumatic tanks, windshield wipers, towing winch brakes, coupling locks, pneumatic dampers on exhaust-heat boilers, pneumatic control of main engines, ozonizer units, air supply for domestic requirements, blowing Kingston valve boxes, casting off towing hooks, releasing anchors, etc.
|
Published |
1977-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 3969:1979 |
Shipbuilding — Inland vessels — Operational documentation |
Establishes the purpose of ship operational documents, their classification and titles. Includes, in addition, the basic provisions for the maintenance and presentation of operational documents, and for the process of their correction and replacement for ships undergoing modification and repairs.
|
Published |
1979-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4050-2:1980 |
Shipbuilding — Inland vessels — Anchors — Part 2: Matrosov anchors |
|
Withdrawn |
1980-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4050:1977 |
Shipbuilding — Inland vessels — "Rhine" and Hall's stockless anchors |
Specifies the main characteristics (main dimensions and technical characteristics) of "Rhine"- and Hall's stockless anchors.
|
Published |
1977-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4051:1977 |
Shipbuilding — Inland vessels — Steering gear — Values of torques |
Specifies the values for steering gears controlling one or more rudders (rotating propelling nozzles).
|
Published |
1977-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4085:1979 |
Shipbuilding — Inland navigation — Swing derricks |
Specifies types, design, main dimensions and technical requirements for swing derricks used in inland vessels of all types and purposes.
|
Withdrawn |
1979-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4089:1979 |
Shipbuilding — Inland navigation — Sealing rubber for covers of cargo hatches |
Specifies the type, principal dimensions and technical requirements. Does not apply to special rubber packings intended to create heat-insulating labyrinths.
|
Published |
1979-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4127-1:1979 |
Shipbuilding — Inland navigation — Fairleads — Part 1: Two-lip fairleads |
Specifies the design, sizes, basic parameters and technical requirements.
|
Published |
1979-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4127-2:1980 |
Shipbuilding — Inland vessels — Fairleads — Part 2: Roller fairleads |
Specifies the types, kinds, basic parameters and technical requirements.
|
Published |
1980-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4143:1981 |
Shipbuilding — Inland vessels — Open rowing lifeboats |
Specifies the types, main characteristics, design requirements and equipment for open rowing lifeboats carried in vessels which are not covered by the International Convention for the Safety of Life at Sea (1974), owing to their operational conditions.
|
Published |
1981-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4146:1980 |
Shipbuilding — Inland vessels — Manholes |
|
Withdrawn |
1980-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 4175:1979 |
Shipbuilding — Shipborne barges, series 1 — Main dimensions |
Specifies the main dimensions and the dimensions of the principal constructional elements.
|
Published |
1979-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO/TR 5987:1984 |
Inland navigation — Water fire-fighting system — Couplings of fire hoses — General technical requirements |
Specifies the types and general technical requirements for coupling head for hose couplings designed for firefighting and used for deck washing on vessels operating in inland waterways.
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 6047:1979 |
Shipbuilding — Inland vessels — Wooden hatch covers |
|
Withdrawn |
1979-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 6205:1988 |
Inland navigation vessels — Customs sealing systems — Basic technical requirements |
The systems are used for sealing off the load compartments on inland navigation vessels. Does not determine the design, but examples of it are given in 6 figures. It also does not contain data to be entered in the customs certificates. Defines custom sealing system, seal and binding elements as parts of these systems.
|
Withdrawn |
1988-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 6216:1980 |
Shipbuilding — Inland navigation — Pilot craft — Classification and basic requirements |
Is applicable to self-propelled water craft employed in the pilot servicing of merchant ships in closed waters, estuaries and open-sea road-steads. The water craft employed mainly in pilotage of merchant ships by leading may be relieved of adhering to these requirements completely or partially.
|
Published |
1980-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 6217:1982 |
Shipbuilding — Inland navigation — Pilot craft — Identification painting and inscriptions |
Helps to permit identification of pilot crafts in heavy weather, in order to improve the efficiency of pilot service and the safety of navigation. Is applicable to pilot craft used in closed waters, estuaries and open road-steads to bring and take off pilot to merchant ships. The applicability of the requirements to pilot craft navigating under a navy flag is determined by the competent authorities of the relevant country.
|
Published |
1982-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.070
Colour coding
;
47.060
Inland navigation vessels
|
| ISO 6218:1981 |
Shipbuilding — Inland navigation — Coupling winches for push tows — Main dimensions |
Specifies the dimensions and requirements necessary to allow the interchangeability. Does not specify the types of vessels on which the coupling winches may be installed; the decision being left to the shipowner.
|
Withdrawn |
1981-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 6218:2005 |
Inland navigation vessels — Manually operated coupling devices for push tows — Safety requirements and main dimensions |
ISO 6218:2005 specifies dimensions and safety requirements for manually operated coupling devices (securing devices) used for assembling inland navigation vessels as a push tow or vessels coupled alongside by means of wire rope connections. It also gives rules for designation and testing.
|
Withdrawn |
2005-04 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 6218:2015 |
Inland navigation vessels — Manually- and power-operated coupling devices for pushing units and coupled vessels — Safety requirements and main dimensions |
ISO 6218:2015 specifies dimensions and safety requirements for manually operated and power-driven coupling devices used for assembling inland navigation vessels as a push tow or vessels coupled alongside by means of wire rope connections. The coupling device secures the stable positioning of the coupled vessels.
Requirements for the safety to protect operators from accidents during the creation, operation, and separation of the wire rope connections of push tows and vessels coupled alongside are contained in this International Standard.
It also gives rules for designation and testing.
|
Withdrawn |
2015-09 |
Edition : 3 |
Number of pages : 16 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 6218:2019 |
Inland navigation vessels — Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels — Safety requirements and main dimensions |
This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels.
Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified in this document.
It also gives rules for designation and testing.
|
Published |
2019-08 |
Edition : 4 |
Number of pages : 15 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 6219:1983 |
Shipbuilding — Inland vessels — Windlasses and anchor capstans |
Specifies the requirements for the design, construction, safety, performance and acceptance testing of windlasses and capstans having electric, hydraulic, steam or external drive.
|
Withdrawn |
1983-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 7236:2014 |
Ships and marine technology — Inland navigation vessels — Mounting attachments for demountable signal masts for push-tows |
ISO 7236:2014 applies to mounting attachments for demountable masts with an integral mast lower part for the placing of lights on push barges. It specifies construction, dimensions, manufacture, arrangement, and means of attachment.
|
Published |
2014-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 7496-2:2022 |
Ships and marine technology — Vocabulary on inland navigation vessels — Part 2: Ship’s shaftings |
This document specifies terms and definitions relating to inland navigation vessels shaftings, with the aim of providing clear definitions which can be understood by all specialists.
This document is applicable only to equipment which is used for the vessels being used for the inland navigation.
The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise.
A combination of terms is allowed in application.
|
Published |
2022-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.060
Inland navigation vessels
;
01.040.47
Shipbuilding and marine structures (Vocabularies)
|
| ISO 7545:1983 |
Shipbuilding and marine structures — Inland navigation — Single-lock automatic couplings for push tows |
Specifies types and main dimensions of the couplings intended for a bow-to-stern connection of vessels in push tows, navigating in waters with a wave height of not more than 2 m. Lays down also basic technical requirements for the couplings. Does not cover side couplings.
|
Withdrawn |
1983-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 7606:1988 |
Shipbuilding — Inland navigation vessels — Draught scales |
Specifies types, dimensions, locations, indication method and colour requirements for the draught scales. Type 1 determines the draught by signs and digits, type 2 only by digits. The lower edge of the keel shall be taken as the measurement base.
|
Withdrawn |
1988-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 7607:1984 |
Shipbuilding — Inland navigation — Multi-bucket dredgers — Scale of bucket capacities |
Gives a series of bucket capacities as a basis for standardization of inland dredger details. This series applies to multi-bucket dredgers used for dredging rivers, canals, lakes, water storage basins, water areas of ports and terminals.
|
Published |
1984-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 7608:1985 |
Shipbuilding — Inland navigation — Couplings for disposal of oily mixture and sewage water |
Specifies types, design and basic dimensions as well as technical requirements. Has been prepared in accordance with the environmental protection aspects of the Final Act of the Conference on Security and Cooperation in Europe (Helsinki, 1975) and is also in conformity with the "International convention for the prevention of pollution from ships", 1973 (MARPOL, 1973).
|
Published |
1985-06 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 8303:1985 |
Shipbuilding — Shipborne barges, series 3 — Main operational and technical requirements |
Specifies the main operational and technical requirements for shipborne barges, when used as a means of transport for cargo transportation both on board a barge-carrier and on inland waterways.
|
Published |
1985-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 8304:1984 |
Shipbuilding — Shipborne barges, series 3 — Ventilation system — Principal mating dimensions |
The ventilation system of shipborne barges has to be jointed to the ventilation system of the appropriate barge-carrier by means of flexible hoses when cargoes requiring ventilation are transported.
|
Published |
1984-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 8384:1991 |
Shipbuilding and marine structures — Dredgers — Vocabulary |
|
Withdrawn |
1991-05 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
47.060
Inland navigation vessels
;
01.040.47
Shipbuilding and marine structures (Vocabularies)
|
| ISO 8384:2000 |
Ships and marine technology — Dredgers — Vocabulary |
|
Withdrawn |
2000-07 |
Edition : 2 |
Number of pages : 43 |
Technical Committee |
47.060
Inland navigation vessels
;
01.040.47
Shipbuilding and marine structures (Vocabularies)
|
| ISO/TR 4558:1985 |
Small craft — Rigging screws for stainless steel wire rope — Principal dimensions for forks, connection pins and eye-holes |
Defines the main dimensions of the concerning parts of rigging screws for stainless steel wire rope, to ensure the compatibility, assembly and interchangeability of the various parts of standing rigging and attachments of yachts.
|
Withdrawn |
1985-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.080
Small craft
|
| ISO 8384:2018 |
Ships and marine technology — Dredgers — Vocabulary |
This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists.
This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil and rocks.
The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise.
A combination of terms is allowed in application.
|
Withdrawn |
2018-08 |
Edition : 3 |
Number of pages : 22 |
Technical Committee |
47.060
Inland navigation vessels
;
01.040.47
Shipbuilding and marine structures (Vocabularies)
|
| ISO 8384:2019 |
Ships and marine technology — Dredgers — Vocabulary |
This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists.
This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil.
The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise.
A combination of terms is allowed in application.
|
Published |
2019-08 |
Edition : 4 |
Number of pages : 22 |
Technical Committee |
47.060
Inland navigation vessels
;
01.040.47
Shipbuilding and marine structures (Vocabularies)
|
| ISO 8385:1990 |
Shipbuilding and marine structures — Dredgers — Classification |
|
Withdrawn |
1990-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 8385:1999 |
Ships and marine technology — Dredgers — Classification |
|
Withdrawn |
1999-05 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 8385:2018 |
Ships and marine technology — Dredgers — Classification |
ISO 8385:2018 provides a single classification for all types of dredgers designed for loosening, raising, transporting and disposing of dredged material.
|
Published |
2018-04 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 9382:1990 |
Shipborne barges, all series — Classification and main requirements |
|
Published |
1990-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 9437:1986 |
Shipbuilding — Inland vessels — Matrosov anchors |
Specifies the technical characteristics and dimensions which are given in figures 1 and 2 and tables 1 and 2. Depending on the method of manufacture, these anchors fall into two types: Type A - cast steel and type B - welded.
|
Published |
1986-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 18421:2013 |
Ships and marine technology — Inland navigation vessels — Lifebuoy housings |
ISO 18421:2013 stipulates the construction and dimensions of housing for lifebuoys.
The housing serves to encase a lifebuoy to protect it against deterioration from the elements and against vandalism.
|
Withdrawn |
2013-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 18421:2016 |
Ships and marine technology — Inland navigation vessels — Lifebuoy housings |
ISO 18421:2016 specifies the construction and dimensions of housing for lifebuoys.
The housing serves to encase a lifebuoy to protect it against deterioration from the elements and against vandalism.
|
Published |
2016-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO 18422:2014 |
Ships and marine technology — Inland navigation vessels — Plate with instructions for rescue, resuscitation and first aid for drowning persons |
ISO 18422:2014 specifies a plate with instructions for rescue, resuscitation and first aid of drowning persons. This plate is intended for use
- on inland navigation vessels;
- at suitable places on the shore of inland waterways, e.g. harbours, berths, locks, sluices, etc.;
- at other suitable places.
|
Published |
2014-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
47.060
Inland navigation vessels
|
| ISO/R 338:1963 |
Lifeboats for less than one hundred people |
|
Withdrawn |
1963-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
47.080
Small craft
|
| ISO 4001:1977 |
Shipbuilding — Inland navigation — Raft-type life-saving apparatus |
Specifies the purpose, materials and main technical requirements for rigid (non-inflatable) raft-type life-saving apparatus, which may be supplied to inland ships.
|
Published |
1977-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.080
Small craft
|
| ISO 7374:1987 |
Photography — 110-size cartridges — Dimensions and format of film and backing paper |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 4565:1986 |
Small craft — Anchor chains |
Specifies the dimensions, characteristics and tolerances as well as galvanizing of anchor chains intended for use with small craft windlasses. Applies to anchor chains of nominal diameter between 6 and 12 mm.
|
Withdrawn |
1986-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
|
| ISO 4566:1985 |
Shipbuilding — Inboard-engined pleasure craft — Propeller shaft ends and bosses |
|
Withdrawn |
1985-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
47.080
Small craft
|
| ISO 4566:1992 |
Small craft with inboard engine — Propeller shaft ends and bosses with 1:10 taper |
Specifies the dimensions and tolerances for interchangeability in the shaft diameter range of 20 mm to 160 mm with a taper of 1 : 10.
|
Published |
1992-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
|
| ISO 4567:1978 |
Shipbuilding — Yachts — Waste water fittings |
Specifies the main characteristics for waste water pump-out fittings on board yachts.
|
Withdrawn |
1978-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.080
Small craft
;
13.030.40
Installations and equipment for waste disposal and treatment
|
| ISO/DIS 6017 |
Small craft — Automatic watertight ventilation shutdown system |
|
Under development |
|
Edition : 1 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
|
| ISO/TR 6065:1991 |
Shipbuilding and marine structures — Inflatable liferafts — Materials |
Specifies the fabrics and test procedures of fabrics for liferafts. Table 1 gives performance criteria. Annex A (tests for coated materials) is for information only.
|
Withdrawn |
1991-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
47.080
Small craft
|
| ISO 6185-1:2001 |
Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW |
|
Published |
2001-11 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
47.080
Small craft
|
| ISO 6185-2:2001 |
Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive |
|
Published |
2001-11 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
47.080
Small craft
|
| ISO 6185-3:2001 |
Inflatable boats — Part 3: Boats with a maximum motor power rating of 15 kW and greater |
|
Withdrawn |
2001-11 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
47.080
Small craft
|
| ISO 6185-3:2014 |
Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
ISO 6185-3:2014 specifies the minimum safety characteristics required for the design, materials to use, manufacture and testing of inflatable boats and rigid inflatable boats with a hull length in accordance with ISO 8666 less than 8 m with a motor power rating of 15 kW and greater.
ISO 6185:2014 is applicable to the following types of boats intended for use within the operating temperatures of -20 °C to +60 °C:
Type VII: Powered Boats (with power ≥ 15 kW) fitted with a buoyancy tube attached to the port and starboard sides, suitable for navigation in conditions of Design Categories C and D and capable of installing motor power rating of 15 kW and greater.
Type VIII: Powered Boats (with power > 75 kW) fitted with a buoyancy tube attached to the port and starboard sides, suitable for navigation in conditions of Design Category B capable of installing motor power rating of 75 kW and greater.
ISO 6185:2014 excludes single-chambered boats and boats made from unsupported materials, and is not applicable to aquatic toys and inflatable liferafts.
|
Published |
2014-08 |
Edition : 2 |
Number of pages : 30 |
Technical Committee |
47.080
Small craft
|
| ISO/DIS 6185-3 |
Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
|
Under development |
|
Edition : 3 |
Number of pages : 28 |
Technical Committee |
47.080
Small craft
|
| ISO 6185-4:2011 |
Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
ISO 6185-4:2011 specifies the minimum safety characteristics required for the design, materials, manufacture and testing of rigid inflatable boats (RIBs) with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater.
It is applicable to Types IX and X of RIBs intended for use within the operating temperatures of -20 °C to +60 °C.
Type IX: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in inshore and sheltered waters, up to and including wind force 6 Beaufort and significant wave heights up to 2 m (design categories C and D), with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater.
Type X: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in waters, up to wind force 8 Beaufort and significant wave heights up to 4 m (design category B), with a hull length of between 8 m and 24 m and with a motor power rating of 75 kW and greater.
It excludes
single-chamber boats,
boats of less than 1 800 N buoyancy, and
boats made from unsupported materials of more than 12 kN inflated buoyancy and powered by motors of power exceeding 4,5 kW.
It is not applicable to aquatic toys, nor to inflatable liferafts which are specified in ISO 9650.
|
Published |
2011-07 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
47.080
Small craft
|
| ISO 6185:1982 |
Shipbuilding and marine structures — Inflatable boats — Boats made of reinforced elastomers or plastomers |
Specifies the minimum safety characteristics required for the design, materials to use, manufacture and testing of inflatable boats. Is applicable to inflatable boats made of reinforced plastomers and elastomers capable of carrying at least one person weighing 75 kg without dimensional limitation. Is not applicable to inflatable life rafts.
|
Withdrawn |
1982-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
|
| ISO 7840:1985 |
Small craft — Fire resistant fuel hoses |
|
Withdrawn |
1985-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
47.080
Small craft
|
| ISO 7840:1994 |
Small craft — Fire-resistant fuel hoses |
Cancels and replaces the first edition (1985). Specifies general requirements and physical tests for fire-resistant hoses for conveying petrol and diesel oil at low pressure, designed for a working pressure not exceeding 0,34 MPa for hoses with nominal bore up to and including 10 mm, and 0,25 MPa for hoses with a larger bore. Applies to hoses for small craft of up to 24 m length of hull with permanently installed inboard engines.
|
Withdrawn |
1994-12 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
|
| ISO 7840:2004 |
Small craft — Fire-resistant fuel hoses |
ISO 7840:2004 specifies general requirements and physical tests for fire-resistant hoses for conveying petrol and diesel oil, designed for a working pressure not exceeding 0,34 MPa for hoses with nominal bore up to and including 10 mm and 0,25 MPa for hoses with larger bore in craft of hull length up to 24 m.
ISO 7840:2004 applies to hoses for small craft with permanently installed fuel systems. It does not apply to hoses entirely within the splash well at the stern of the craft connected directly to an outboard engine.
|
Withdrawn |
2004-02 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
|
| ISO 7840:2013 |
Small craft — Fire-resistant fuel hoses |
ISO 7840:2013 specifies general requirements and physical tests for fire-resistant hoses for conveying petrol or petrol blended with ethanol and diesel fuel or diesel fuel blended with FAME, designed for a working pressure not exceeding 0,34 MPa for hoses with nominal bore up to and including 10 mm and 0,25 MPa for hoses up to 63 mm inner diameter in craft of hull length up to 24 m.
It applies to hoses for small craft with permanently installed fuel systems. It does not apply to hoses entirely within the splash well at the stern of the craft connected directly to an outboard engine.
Specifications for non-fire-resistant fuel hoses are given in ISO 8469. Specifications for permanently installed fuel systems are given in ISO 10088.
|
Withdrawn |
2013-07 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
47.080
Small craft
|
| ISO 7840:2021 |
Small craft — Fire-resistant fuel hoses |
This document specifies general requirements and physical tests for fire-resistant hoses for conveying petrol or petrol blended with ethanol, and diesel fuel or diesel fuel blended with FAME, designed for a working pressure not exceeding 0,34 MPa for hoses with inner diameter up to and including 10 mm, and 0,25 MPa for hoses up to 63 mm inner diameter in small craft.
It applies to hoses for small craft with permanently installed fuel systems. It does not apply to hoses entirely within the splash well at the stern of the craft connected directly to an outboard engine.
Specifications for non-fire-resistant fuel hoses are given in ISO 8469:2021. Specifications for permanently installed fuel systems are given in ISO 10088:2013.
|
Published |
2021-02 |
Edition : 5 |
Number of pages : 10 |
Technical Committee |
47.080
Small craft
|
| ISO 8099-1:2018 |
Small craft — Waste systems — Part 1: Waste water retention |
ISO 8099-1:2018 specifies requirements for the design, construction and installation of systems for temporary retention of sewage for subsequent disposal. It applies to small craft with a length of hull (LH) of up to 24 m.
ISO 8099-1:2018 does not address waste water treatment systems.
|
Published |
2018-02 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
47.080
Small craft
|
| ISO 8099-2:2020 |
Small craft — Waste systems — Part 2: Sewage treatment systems |
This document specifies requirements for the design, construction and installation of sewage treatment systems on small craft.
It does not address waste retention systems, nor accidental discharge prevention of pollutants (e.g. oil, fuel) overboard.
It does not address the technical discharge limits of a sewage treatment unit, subject to certain international as well as national regulations.
|
Published |
2020-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
|
| ISO 8099:1985 |
Small craft — Toilet retention and recirculating systems for the treatment of toilet waste |
|
Withdrawn |
1985-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
;
13.030.40
Installations and equipment for waste disposal and treatment
|
| ISO 8099:2000 |
Small craft — Toilet waste retention systems |
|
Withdrawn |
2000-12 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
47.080
Small craft
|
| ISO 10134:2003 |
Small craft — Electrical devices — Lightning-protection systems |
ISO 10134:2003 establishes guidelines for the design, construction and installation of lightning-protection systems fitted on small craft of hull length up to 24 m.
|
Withdrawn |
2003-08 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
|
| ISO 8469:1994 |
Small craft — Non-fire-resistant fuel hoses |
Specifies general requirements and physical tests for non-fire-resistant hoses for conveying petrol and diesel oil at low pressure, designed for a working pressure not exceeding 0,34 MPa for hoses with nominal bore up to and including 10 mm, and 0,25 MPa for hoses with a larger bore. Applies to hoses for small craft of up to 24 m length of hull with permanently installed inboard engines.
|
Withdrawn |
1994-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.080
Small craft
|
| ISO 8469:2006 |
Small craft — Non-fire-resistant fuel hoses |
ISO 8469:2006 specifies general requirements and physical tests for non-fire-resistant hoses for conveying petrol end diesel oil designed for a working pressure not exceeding 0,34 MPa for hoses with inner diameter up to and including 10 mm and 0,25 MPa for hoses up to 63 mm inner diameter in craft of hull length up to 24 m.
ISO 8469:2006 applies to hoses for small craft with permanently installed fuel systems.
Specifications for fire-resistant hoses are laid down in ISO 7840.
|
Withdrawn |
2006-07 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
|
| ISO 8469:2013 |
Small craft — Non-fire-resistant fuel hoses |
ISO 8469:2013 specifies general requirements and physical tests for non-fire-resistant hoses for conveying petrol or petrol blended with ethanol and diesel fuel or diesel fuel blended with FAME, designed for a working pressure not exceeding 0,34 MPa for hoses with inner diameter up to and including 10 mm and 0,25 MPa for hoses up to 63 mm inner diameter in craft of hull length up to 24 m.
It applies to hoses for small craft with permanently installed fuel systems.
Specifications for fire-resistant hoses are given in ISO 7840. Specifications for permanently installed fuel systems are given in ISO 10088.
|
Withdrawn |
2013-07 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
|
| ISO 8469:2021 |
Small craft — Non-fire-resistant fuel hoses |
This document specifies general requirements and physical tests for non-fire-resistant hoses for conveying petrol or petrol blended with ethanol, and diesel fuel or diesel fuel blended with FAME, designed for a working pressure not exceeding 0,34 MPa for hoses with inner diameter up to and including 10 mm, and 0,25 MPa for hoses up to 63 mm inner diameter in small craft. .
It applies to hoses for small craft with permanently installed fuel systems.
Specifications for fire-resistant hoses are given in ISO 7840:2021. Specifications for permanently installed fuel systems are given in ISO 10088:2013.
|
Published |
2021-02 |
Edition : 4 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
|
| ISO/DIS 8665-2 |
Small craft — Power measurements and declarations — Part 2: Electric marine propulsion |
Develop a Part 2 of 8665 to address electric propulsion devices for small craft.
|
Under development |
|
Edition : 1 |
Number of pages : 6 |
Technical Committee |
47.080
Small craft
|
| ISO 8665:1988 |
Small craft — Marine propulsion engines and systems — Power measurements and declarations |
|
Withdrawn |
1988-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
|
| ISO 8665:1994 |
Small craft — Marine propulsion engines and systems — Power measurements and declarations |
Specifies the test requirements in addition to those given in ISO 3046-1 for determining the power, at a single point or as a power curve, of marine propulsion engines or systems for recreational craft and other small craft using similar propulsion equipment of up to 24 m hull length. Also provides the means for documenting and checking the declared (rated) power published by the manufacturer.
|
Withdrawn |
1994-07 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
47.080
Small craft
|
| ISO 8665:2006 |
Small craft — Marine propulsion reciprocating internal combustion engines — Power measurements and declarations |
ISO 8665:2006 specifies the requirements additional to ISO 15550 for determining the power of reciprocating internal combustion (RIC) engines when presented for documenting and checking of the declared (rated) power published by the manufacturer.
ISO 8665:2006 applies to engines used for propulsion of recreational craft and other small craft of up to 24 m hull length.
ISO 8665:2006 is to be used in conjunction with ISO 15550.
|
Published |
2006-06 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
47.080
Small craft
|
| ISO 8666:2002 |
Small craft — Principal data |
ISO 8666:2002 establishes uniformity of definitions of main dimensions and related data, and of mass specifications and loading conditions. It applies to small craft having a length of the hull of up to 24 m.
|
Withdrawn |
2002-11 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
47.080
Small craft
|
| ISO 8666:2016 |
Small craft — Principal data |
ISO 8666:2016 establishes definitions of main dimensions and related data and of mass specifications and loading conditions. It applies to small craft having a length of the hull (LH) of up to 24 m.
|
Withdrawn |
2016-07 |
Edition : 2 |
Number of pages : 23 |
Technical Committee |
47.080
Small craft
|
| ISO 8666:2020 |
Small craft — Principal data |
This document establishes definitions of main dimensions and related data and of mass specifications and loading conditions. It applies to small craft having a length of the hull (LH) of up to 24 m.
|
Published |
2020-11 |
Edition : 3 |
Number of pages : 23 |
Technical Committee |
47.080
Small craft
|
| ISO 8845:1994 |
Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper |
Specifies the dimensions for interchangeability of propeller bosses and propeller shaft ends in the shaft diameter range of 20 mm to 160 mm with a taper of 1:16, intended for installation in inboard-engined recreational and commercial small craft.
|
Published |
1994-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
47.080
Small craft
|
| ISO 8845:1994/Cor 1:1995 |
Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper — Technical Corrigendum 1 |
Corrigendum relates to the extension of the length of the threaded end of propeller shafts (table 1).
|
Published |
1995-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.080
Small craft
|
| ISO 8846:1990 |
Small craft — Electrical devices — Protection against ignition of surrounding flammable gases |
Describes test methods and requirements for the design of electrical devices to be used on small craft so that they may be operated in an explosive atmosphere without igniting surrounding flammable gases.
|
Published |
1990-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
|
| ISO 8847:1987 |
Small craft — Steering gear — Wire rope and pulley systems |
Specifies the minimum level of requirements for construction, operation and installation of wire rope and pulley steering systems on sailing craft, with or without an auxiliary engine. Sets requirements for the design and construction of all components of a steering system from the wheel to, and including, the steering arm.
|
Withdrawn |
1987-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
|
| ISO 8847:2004 |
Small craft — Steering gear — Cable and pulley systems |
ISO 8847:2004 specifies the minimum level of requirements for operation, construction and installation of cable and pulley steering systems on sailing craft of hull length up to 24 m , with or without an auxiliary engine.
ISO 8847:2004 sets requirements for the design and construction of all components of a steering system from the wheel to, and including, the steering arm. It applies only to cable and pulley steering systems, whether for pedestal or bulkhead types.
The design and specifications for the rudder shaft and rudder blade are within the province of the naval architect and are assumed to be appropriate to the size and speed of the boat.
|
Withdrawn |
2004-05 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
|
| ISO 8847:2021 |
Small craft — Steering gear — Cable over pulley systems |
This document specifies the requirements for the design, installation and testing of cable over pulley steering systems on small craft with or without a propulsion engine(s), and on small craft with outboard engine(s) up to and including 37 kW total power.
It specifies the requirements for the design and testing of all components of a cable over pulley steering system, from the steering mechanism to the mechanical interface with the rudder shaft or the outboard engine. It applies to cable over pulley steering systems, whether for pedestal or bulkhead types.
This document does not address emergency means of steering the craft.
|
Published |
2021-06 |
Edition : 3 |
Number of pages : 23 |
Technical Committee |
47.080
Small craft
|
| ISO 8848:1990 |
Small craft — Remote steering systems |
Lays down requirements and test methods for remote push-pull cable steering systems and their major component items, used for small craft with single and twin installations of outboard motors of over 15 kW power, and all inboard motors, inboard motor-outdrives, and waterjet drives.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
|
| ISO 8848:2020 |
Small craft — Remote mechanical steering systems |
This document specifies design, construction, installation and test requirements for remote mechanical cable steering systems and the output ram interface point to rudders, jet drives, outboard and sterndrive engines for small craft.
It is applicable to three distinct classes of steering systems for use on various types of craft:
— standard duty steering systems, for small craft with single and twin installations of outboard engines with a total over 15 kW power, and with rudders, sterndrives, and water-jet drives;
— light duty steering systems, for small craft with a single outboard engine of 15 kW to 40 kW power;
— mini-jet steering systems, excluding personal watercraft.
NOTE Standard and light duty steering systems are mechanically interchangeable. A standard duty steering system can be used on a craft designed for a light duty system. However, a light duty steering system cannot be used on a craft that requires a standard duty steering system. Mini-jet steering systems are mechanically differentiated from the previously mentioned systems and can only be used on mini-jet craft as defined in this document.
This document does not address emergency means for steering the craft.
|
Withdrawn |
2020-12 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
47.080
Small craft
|
| ISO 9094:2015 |
Small craft — Fire protection |
ISO 9094:2015 defines a practical degree of fire prevention and protection intended to provide enough time for occupants to escape a fire on board small craft.
It applies to all small craft of up to 24 m length of hull (LH) except for personal watercraft.
ISO 9094:2015 excludes:
the design and installation of those permanently installed galley stoves and heating appliances (including components used to distribute the heat) using fuels that are liquid at atmospheric pressure on small craft, which are covered by ISO 14895;
carbon monoxide detecting systems, which are covered by ISO 12133.
|
Withdrawn |
2015-11 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
47.080
Small craft
|
| ISO 8848:2022 |
Small craft — Remote mechanical steering systems |
This document specifies design, construction, installation and test requirements for remote mechanical cable steering systems and the output ram interface point to rudders, jet drives, outboard and sterndrive engines for small craft.
It is applicable to three distinct classes of steering systems for use on various types of craft:
— standard duty steering systems, for small craft with single and twin installations of outboard engines with a total over 15 kW power, and with rudders, sterndrives and water-jet drives;
— light duty steering systems, for small craft with a single outboard engine of 15 kW to 40 kW power;
— mini-jet steering systems, excluding personal watercraft.
NOTE Standard and light duty steering systems are mechanically interchangeable. A standard duty steering system can be used on a craft designed for a light duty system. However, a light duty steering system cannot be used on a craft that requires a standard duty steering system. Mini-jet steering systems are mechanically differentiated from the previously mentioned systems and can only be used on mini-jet craft as defined in this document.
This document does not address emergency means for steering the craft.
|
Published |
2022-04 |
Edition : 3 |
Number of pages : 20 |
Technical Committee |
47.080
Small craft
|
| ISO 8849:1990 |
Small craft — Electrically operated bilge-pumps |
Specifies requirements for electrically operated pumps intended for use in removing bilge-water from small craft. Applies to electrically operated bilge-pumps rated for less than 50 V d.c.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.080
Small craft
|
| ISO 8849:2003 |
Small craft — Electrically operated direct-current bilge pumps |
ISO 8849:2003 specifies requirements for electrically operated direct-current bilge pumps intended for use in removing bilge water from small craft with a hull length up to 24 m. It applies to electrically operated bilge pumps rated for less than 50 V direct current (d.c.). It does not cover pumps intended for damage control.
|
Withdrawn |
2003-10 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
|
| ISO 8849:2020 |
Small craft — Electrically operated bilge pumps |
This document specifies requirements for electrically operated bilge pumps intended for use in removing bilge water. It applies to:
— direct current (DC) bilge pumps which operate at a nominal voltage not exceeding 50 V; and
— single phase alternating current (AC) bilge pumps which operate at a nominal voltage not exceeding 250 V.
It does not cover pumps intended for damage control.
|
Published |
2020-12 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
47.080
Small craft
|
| ISO 9093-1:1994 |
Small craft — Seacocks and through-hull fittings — Part 1: Metallic |
Specifies requirements for metallic through-hull fittings, seacocks and hose fittings that specifically form part of water intake and discharge lines, and for wet exhaust outlets used in small craft of up to 24 m length of hull. Applies to seacocks and through-hull fittings with cylindrical pipe threads in accordance with ISO 228-1, and with joints for conical pipe threads in accordance with ISO 7-1 with nominal diameters of 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3 or 4 in.
|
Withdrawn |
1994-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.080
Small craft
|