| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 13342:1995 |
Small craft — Static thrust measurement for outboard motors |
Describes a method for measuring and declaring the forward and reverse thrust of outboard motors in a stationary situation to determine if start-in-gear protection is required.
|
Published |
1995-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.080
Small craft
|
| ISO 13363:2004 |
Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification |
ISO 13363:2004 specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water). The standard does not apply to outboard-motor/personal water craft.
The three types are:
type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement;
type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with an helical wire embedded in it;
type 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage.
The two classes are:
class A intended for diesel engines;
class B intended for petrol engines, and for diesel engines with a very high exhaust temperature.
|
Withdrawn |
2004-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
;
83.140.40
Hoses
|
| ISO 13363:2004/Cor 1:2008 |
Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification — Technical Corrigendum 1 |
ISO 13363:2004 specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water). The standard does not apply to outboard-motor/personal water craft.
The three types are:
type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement;
type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with an helical wire embedded in it;
type 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage.
The two classes are:
class A intended for diesel engines;
class B intended for petrol engines, and for diesel engines with a very high exhaust temperature.
|
Withdrawn |
2008-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.080
Small craft
;
83.140.40
Hoses
|
| ISO 13363:2016 |
Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification |
ISO 13363:2016 specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water). It does not apply to outboard motor/personal water craft.
The three types are the following:
- type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement;
- type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with a helical wire embedded in it;
- type 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage.
The two classes are the following:
- class A: intended for diesel engines;
- class B: intended for petrol engines and for diesel engines with a very high exhaust temperature.
|
Published |
2016-01 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
;
83.140.40
Hoses
|
| ISO 13590:1997 |
Small craft — Personal watercraft — Construction and system installation requirements |
|
Withdrawn |
1997-09 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
47.080
Small craft
|
| ISO 13590:2003 |
Small craft — Personal watercraft — Construction and system installation requirements |
ISO 13590:2003 applies to personal watercraft, for the construction and installation of builder's plate, permanently installed petrol fuel systems, electrical systems, steering systems, ventilation, hull structure and floatation, and requirements for stability, freeboard and owner's manual.
|
Withdrawn |
2003-12 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
47.080
Small craft
|
| ISO 14227:2001 |
Small craft — Magnetic compasses |
This International Standard specifies the general requirements for the construction as well as the performance of
type tests of magnetic compasses on board small craft of hull length up to 24 m. It refers to liquid magnetic
compasses, which can be inspected (e.g. not sealed), either equipped with a direct reading system, or of the
reflecting/projecting type.
This International Standard also covers magnetic compasses (3.1) not supported on gimbals. The requirements
relating to gimbals do not refer to such magnetic compasses.
This International Standard does not cover
dry card compasses, or
types of compasses designed on principles different from those stated above or not complying with the
description given in this clause (e.g. transmitting compasses).
|
Published |
2001-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
|
| ISO 14509-1:2008 |
Small craft — Airborne sound emitted by powered recreational craft — Part 1: Pass-by measurement procedures |
ISO 14509-1:2008 specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of up to 24 m length of hull, including inboards, stern drives, personal watercraft (PWC) and outboard motors.
It also specifies standard craft based type tests for stern drives with integral exhaust systems and for outboard motors. It also specifies the procedure to be followed if, in addition to the maximum sound pressure level, the determination of the sound exposure level is desired.
The accuracy grade of the acoustical test procedures specified in ISO 14509-1:2008 is engineering grade (grade 2).
|
Published |
2008-10 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
47.080
Small craft
;
17.140.30
Noise emitted by means of transport
|
| ISO 14509-2:2006 |
Small craft — Airborne sound emitted by powered recreational craft — Part 2: Sound assessment using reference craft |
ISO 14509-2:2006 specifies the procedures to assess the maximum sound emission of powered mono-hull recreational craft of up to 24 m length according to one of the two alternative methods defined in Annex A and Annex B.
ISO 14509-2:2006 is not applicable for the type testing of outboard motors and of stern drives with integral exhaust systems.
|
Withdrawn |
2006-11 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
47.080
Small craft
;
17.140.30
Noise emitted by means of transport
|
| ISO 14509-3:2009 |
Small craft — Airborne sound emitted by powered recreational craft — Part 3: Sound assessment using calculation and measurement procedures |
ISO 14509-3:2009 specifies the procedures for assessing sound emission of powered monohull recreational craft of length up to 24 m with a Froude number greater than 1,1. It is not applicable for personal watercraft (PWC).
ISO 14509-3:2009 specifies the determination of the A-weighted sound pressure level by combining a calculation method and a measurement method.
|
Published |
2009-08 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
47.080
Small craft
;
17.140.30
Noise emitted by means of transport
|
| ISO 14509:2000 |
Small craft - Measurement of airborne sound emitted by powered recreational craft |
|
Withdrawn |
2000-11 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
47.080
Small craft
;
17.140.30
Noise emitted by means of transport
|
| ISO 14509:2000/Amd 1:2004 |
Small craft - Measurement of airborne sound emitted by powered recreational craft — Amendment 1 |
ISO 14509:2000, Amendment 1:2004 specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of up to 24 m length of hull including inboards, stern drives, personal watercraft (PWC) and outboard motors. It also specifies type tests for stern drives with integral exhaust systems and for outboard motors, based on standard craft.
|
Withdrawn |
2004-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
;
17.140.30
Noise emitted by means of transport
|
| ISO 14895:2000 |
Small craft — Liquid-fuelled galley stoves |
|
Withdrawn |
2000-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
47.080
Small craft
|
| ISO 14895:2016 |
Small craft — Liquid-fuelled galley stoves and heating appliances |
ISO 14895:2016 specifies the design, construction and installation of permanently installed galley stoves and heating appliances using fuels which are liquid at atmospheric pressure on small craft up to 24 m length of hull (LH according to ISO 8666). It includes open flame galley stoves, ceramic hobs, blown air heaters and water heating appliances.
Cooking and heating appliances solely designed or intended as portable self-contained camping stoves or heaters are not covered. Other permanently installed cooking and heating appliances (such as solid-fuelled and liquid-fuelled natural draft stoves) are outside the scope of this International Standard and therefore covered by ISO 9094.
|
Published |
2016-06 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
47.080
Small craft
|
| ISO 14945:2004 |
Small craft — Builder's plate |
ISO 14945:2004 establishes requirements for the uniform display of information to be exhibited on the builder's plate of small craft with a hull length LH of up to 24 m, measured according to ISO 8666. Excluded are inflatable boats covered by ISO 6185 and personal watercraft covered by ISO 13590.
|
Withdrawn |
2004-04 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
47.080
Small craft
|
| ISO 14946:2021 |
Small craft — Maximum load capacity |
This document specifies the items included in the maximum load of small craft, without exceeding the limits set by other ISO standards for stability, freeboard, and flotation. It further sets requirements for seating and occupancy areas of crew members.
Personal watercraft are excluded from the Scope of this document.
|
Published |
2021-04 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
47.080
Small craft
|
| ISO 15083:2003 |
Small craft - Bilge-pumping systems |
ISO 15083:2003 specifies requirements for pumping or alternative means designed to remove normal accumulations of bilge water for small craft with a hull length up to 24 m according to ISO 8666.
ISO 15083:2003 does not set requirements for bilge pumps or bilge-pumping systems designed for damage control.
|
Withdrawn |
2003-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
|
| ISO 15083:2020 |
Small craft — Bilge-pumping systems |
This document specifies requirements for pumping or alternative means designed to remove normal accumulations of bilge water for small craft with a length of hull, LH, as defined in ISO 8666:2016, of up to 24 m.
This document does not set requirements for bilge pumps or bilge-pumping systems designed for damage control.
|
Published |
2020-04 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
|
| ISO 15083:2020/Amd 1:2022 |
Small craft — Bilge-pumping systems — Amendment 1 |
|
Published |
2022-09 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
|
| ISO 15084:2003 |
Small craft — Anchoring, mooring and towing — Strong points |
ISO 15084:2003 specifies requirements for strong points for attaching chains, cables and lines for anchoring, mooring and towing small craft. It does not specify the requirement for the strong point from which the craft can tow other vessels. This standard is applicable to small craft with a hull length up to 24 m.
ISO 15084:2003 does not define anchor weights or the length of chains and lines.
|
Published |
2003-02 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
|
| ISO 15085:2003 |
Small craft — Man-overboard prevention and recovery |
ISO 15085:2003 specifies the design as well as the construction and strength requirements for safety devices and arrangements intended to minimize the risk of falling overboard, and requirements to facilitate reboarding.
It describes means which can be used individually or combined to achieve these objectives, and applies to small craft of up to 24 m length of hull.
ISO 15085:2003 is not applicable to the following boat types:
aquatic toys;canoes, kayaks, or other boats with a beam less than 1,1 m;personal watercraft, covered by ISO 13590;inflatable boats with a hull length of less than 8 m, covered by ISO 6185.
|
Published |
2003-04 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
47.080
Small craft
|
| ISO 15085:2003/Amd 1:2009 |
Small craft — Man-overboard prevention and recovery — Amendment 1 |
|
Withdrawn |
2009-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.080
Small craft
|
| ISO 15085:2003/Amd 2:2017 |
Small craft — Man-overboard prevention and recovery — Amendment 2 |
|
Published |
2017-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.080
Small craft
|
| ISO/DIS 15085 |
Small craft — Man-overboard prevention and recovery |
|
Under development |
|
Edition : 2 |
Number of pages : 32 |
Technical Committee |
47.080
Small craft
|
| ISO 15372:2000 |
Ships and marine technology — Inflatable rescue boats — Coated fabrics for inflatable chambers |
This International Standard specifies the minimum requirements for coated fabrics, and test procedures for those
fabrics, for use in the construction of inflatable chambers of rescue boats complying with the 1974 Safety of Life at
Sea Convention (SOLAS), as amended; Chapter I, paragraph 1.2, and Chapter V of the International Life-Saving
Appliance Code [IMO Resolution MSC.48 (66)]; and the IMO Assembly resolution A.689(17), as amended. These
coated fabrics consist of a base textile with a synthetic elastomeric or plastomeric compound applied to one or both
faces.
Requirements for fabrics for inflatable boats other than SOLAS rescue boats are contained in ISO 6185:1982,
Shipbuilding and marine structures — Inflatable boats — Boats made of reinforced elastomers or plastomers.
|
Published |
2000-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
47.080
Small craft
|
| ISO 15372:2000/Amd 1:2021 |
Ships and marine technology — Inflatable rescue boats — Coated fabrics for inflatable chambers — Amendment 1: Oil-resistance test |
|
Published |
2021-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.080
Small craft
|
| ISO 15584:2001 |
Small craft — Inboard petrol engines — Engine-mounted fuel and electrical components |
|
Published |
2001-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
47.080
Small craft
|
| ISO 15652:2003 |
Small craft — Remote steering systems for inboard mini jet boats |
ISO 15652:2003 specifies the minimum level of requirements for construction, operation and installation of remote steering systems for all small inboard jet boats weighing less than 1 000 kg, excluding water scooters.
|
Withdrawn |
2003-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
|
| ISO 15734:2001 |
Ships and marine technology — Hydrostatic release units |
This International Standard specifies performance and testing requirements for hydrostatic release units used in
conjunction with float-free lifesaving appliances including inflatable liferafts and Emergency Position Indicating Radio
Beacons (EPIRB 's). Hydrostatic release units which comply with this International Standard and which have been
formally approved by the cognizant Maritime Safety Administration may be considered to comply with the 1974
Safety Of Life At Sea Convention (SOLAS 74) and the IMO Life-Saving Appliances Code, as amended.
|
Published |
2001-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO 15736:2006 |
Ships and marine technology — Pyrotechnic life-saving appliances — Testing, inspection and marking of production units |
ISO 15736:2006 specifies production tests and inspections, conformity assessment procedures, and marking requirements for life-saving appliances that utilize pyrotechnic devices in functioning. Specifically, it applies to products which have been evaluated and tested in accordance with the IMO Recommendation on testing of life-saving appliances, and type approved by maritime administrations to the requirements of the IMO Life-Saving Appliance (LSA) Code for use on ships subject to the requirements of the 1974 Safety of Life at Sea Convention (as amended). The basic principles may be considered suitable for pyrotechnic life-saving appliances manufactured to other than the IMO requirements, however ISO 15736:2006 applies directly only to products for which it contains specific requirements.
|
Published |
2006-01 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
47.080
Small craft
|
| ISO 16147:2002 |
Small craft — Inboard diesel engines — Engine-mounted fuel and electrical components |
ISO 16147:2002 establishes requirements for the design and installation of engine-mounted fuel and electrical components on diesel inboard-mounted engines for minimizing fuel leakage and the risk of and/or the spread of fire on small craft of hull length up to 24 m.
|
Withdrawn |
2002-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
47.080
Small craft
|
| ISO 16147:2002/Amd 1:2013 |
Small craft — Inboard diesel engines — Engine-mounted fuel and electrical components — Amendment 1 |
|
Withdrawn |
2013-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
47.080
Small craft
|
| ISO 16147:2018 |
Small craft — Inboard diesel engines — Engine-mounted fuel, oil and electrical components |
This document establishes requirements for the design and installation of engine-mounted fuel, oil and electrical components on diesel inboard-mounted engines for minimizing fuel leakage, risk of electric shock and the risk of and/or the spread of fire on small craft of hull length up to 24 m.
|
Withdrawn |
2018-05 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
47.080
Small craft
|
| ISO 16147:2020 |
Small craft — Inboard diesel engines — Engine-mounted fuel, oil and electrical components |
This document establishes requirements for the design and installation of engine-mounted fuel, oil and electrical components on diesel inboard-mounted engines for minimizing fuel leakage, risk of electric shock and the risk of and/or the spread of fire on small craft of hull length up to 24 m in accordance with ISO 8666.
|
Published |
2020-12 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
47.080
Small craft
|
| ISO 16180:2013 |
Small craft — Navigation lights — Installation, placement and visibility |
ISO 16180:2013 specifies requirements and gives guidelines for the placement, installation and visibility of navigation lights as described in COLREG for recreational craft of less than 24 m in length of hull, as described in ISO 8666. Annex A of ISO 16180:2013 lists additional information to be included in the owner's manual.
|
Published |
2013-03 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
|
| ISO 16315:2016 |
Small craft — Electric propulsion system |
ISO 16315:2016 addresses the design and installation of alternating current (AC) and direct current (DC) electrical systems used for the purpose of electrical propulsion and/or electrical hybrid (system with both a rechargeable battery and a fuelled power source) propulsion.
ISO 16315:2016 applies to electrical propulsion systems operated in the following ranges either individually or in combination: direct current of less than 1 500 V DC; single-phase alternating current up to AC 1 000 V; three-phase alternating current up to AC 1 000 V.
ISO 16315:2016 applies to electrical propulsion systems installed in small craft up to 24 m length of the hull (LH according to ISO 8666).
|
Published |
2016-03 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
47.080
Small craft
|
| ISO/CD 16315 |
Small craft — Electric propulsion system |
ISO 16315:2016 addresses the design and installation of alternating current (AC) and direct current (DC) electrical systems used for the purpose of electrical propulsion and/or electrical hybrid (system with both a rechargeable battery and a fuelled power source) propulsion.
ISO 16315:2016 applies to electrical propulsion systems operated in the following ranges either individually or in combination: direct current of less than 1 500 V DC; single-phase alternating current up to AC 1 000 V; three-phase alternating current up to AC 1 000 V.
ISO 16315:2016 applies to electrical propulsion systems installed in small craft up to 24 m length of the hull (LH according to ISO 8666).
|
Under development |
|
Edition : 2 |
|
Technical Committee |
47.080
Small craft
|
| ISO 17339:2002 |
Ships and marine technology — Sea anchors for survival craft and rescue boats |
ISO 17339:2002 specifies requirements for the design, performance and prototype testing of sea anchors fitted to survival craft (lifeboats and liferafts) and rescue boats in accordance with the IMO International Life-Saving Appliance Code.
|
Withdrawn |
2002-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
47.080
Small craft
|
| ISO 17339:2018 |
Ships and marine technology — Life saving and fire protection — Sea anchors for survival craft and rescue boats |
This document specifies requirements for the design, performance and prototype testing of sea anchors fitted to survival craft (lifeboats and liferafts) and rescue boats in accordance with the IMO International Life-Saving Appliance Code.
|
Published |
2018-07 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
47.080
Small craft
|
| ISO 18079-1:2018 |
Ships and marine technology — Servicing of inflatable life-saving appliances — Part 1: General |
This document, in conjunction with ISO 18079‑2, ISO 18079‑3, ISO 18079‑4 and ISO 18079‑5, states general provisions for servicing stations for inflatable life-saving appliances including, but not limited to, those subject to SOLAS III/20.8.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
;
13.340.70
Lifejackets, buoyancy aids and flotation devices
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO 18079-2:2018 |
Ships and marine technology — Servicing of inflatable life-saving appliances — Part 2: Inflatable life rafts |
This document, in conjunction with ISO 18079‑1, provides provisions for servicing stations servicing inflatable life rafts referred to in SOLAS III/20.8. This document is applicable to non-SOLAS inflatable life rafts, as appropriate.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
47.080
Small craft
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO 18079-4:2018 |
Ships and marine technology — Servicing of inflatable life-saving appliances — Part 4: Marine evacuation systems |
This document, in conjunction with ISO 18079‑1, provides provisions for servicing stations for marine evacuation systems referred to in SOLAS III (20.8). This document is applicable to non-SOLAS marine evacuation systems, as appropriate.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
47.080
Small craft
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO 18079-5:2018 |
Ships and marine technology — Servicing of inflatable life-saving appliances — Part 5: Inflated rescue boats |
This document, in conjunction with ISO 18079‑1, provides provisions for servicing stations servicing inflated rescue boats referred to in SOLAS III/20.8. This document is applicable to non-SOLAS inflated rescue boats, as appropriate.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO 18813:2006 |
Ships and marine technology — Survival equipment for survival craft and rescue boats |
ISO 18813:2006 specifies design, performance, and use of various items of survival equipment carried in survival craft and rescue boats complying with the International Convention for the Safety of Life at Sea (SOLAS), 1974 (as amended), and the International Maritime Organization Life-Saving Appliance Code (LSA Code). For many items, it also includes guidelines for maintenance and periodic inspections by Administrations or ships' crews.
|
Withdrawn |
2006-04 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
47.080
Small craft
|
| ISO 18813:2022 |
Ships and marine technology — Survival equipment for survival craft and rescue boats |
This document specifies design, performance, and use of various items of survival equipment carried in survival craft and rescue boats complying with the International Convention for the Safety of Life at Sea (SOLAS), 1974 (as amended) and the International Maritime Organization Life-Saving Appliance Code (LSA Code). For many items, it also includes requirements for maintenance and periodic inspections by Administrations in Annex A and guidelines for maintenance and periodic inspections by Administrations or ships’ crews in Annex B. However, compliance of a product with this document does not relieve the manufacturer of a survival craft or rescue boat of the responsibility to evaluate the suitability of the product in their particular application.
|
Published |
2022-09 |
Edition : 2 |
Number of pages : 25 |
Technical Committee |
47.080
Small craft
|
| ISO 18854:2015 |
Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions |
ISO 18854:2015 specifies the measurement and evaluation methods for gaseous and particulate exhaust emissions from reciprocating internal combustion (RIC) engines under steady-state conditions on a test bed, necessary for determining one weighted value for each exhaust gas pollutant. Various combinations of engine load and speed reflect different engine applications.
It is applicable to RIC marine engines intended to be installed in small craft up to 24 m length of hull.
|
Published |
2015-04 |
Edition : 1 |
Number of pages : 86 |
Technical Committee |
47.080
Small craft
;
13.040.50
Transport exhaust emissions
;
47.020.20
Marine engines and propulsion systems
|
| ISO 19009:2015 |
Small craft — Electric navigation lights — Performance of LED lights |
ISO 19009:2015 applies to requirements and testing for navigation lights with permanently fixed light emitting diode (LED) assemblies for small craft up to 24 m length of the hull.
|
Published |
2015-09 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
47.080
Small craft
|
| ISO 21487:2006 |
Small craft — Permanently installed petrol and diesel fuel tanks |
ISO 21487:2006 establishes requirements for design and test of petrol and diesel fuel tanks for internal combustion engines that are intended to be permanently installed in small craft of up to 24 m length of hull.
For installation requirements, ISO 10088 applies.
|
Withdrawn |
2006-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
|
| ISO 21487:2006/Cor 1:2008 |
Small craft — Permanently installed petrol and diesel fuel tanks — Technical Corrigendum 1 |
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.080
Small craft
|
| ISO 21487:2012 |
Small craft — Permanently installed petrol and diesel fuel tanks |
ISO 21487:2012 establishes requirements for design and test of petrol and diesel fuel tanks for internal combustion engines that are intended to be permanently installed in small craft of up to 24 m length of hull.
For installation requirements, ISO 10088 applies.
|
Withdrawn |
2012-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
47.080
Small craft
|
| ISO 21487:2012/Amd 1:2014 |
Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 1 |
|
Withdrawn |
2014-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
47.080
Small craft
|
| ISO 21487:2012/Amd 2:2015 |
Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 2 |
|
Withdrawn |
2015-11 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
47.080
Small craft
|
| ISO 21487:2022 |
Small craft — Permanently installed petrol and diesel fuel tanks |
This document specifies requirements for the design, installation and testing of petrol and diesel fuel tanks for internal combustion engines, that are intended to be permanently installed in small craft.
|
Published |
2022-11 |
Edition : 3 |
Number of pages : 16 |
Technical Committee |
47.080
Small craft
|
| ISO 23411:2020 |
Small craft — Steering wheels |
This document specifies design and testing requirements for steering wheels for small craft.
|
Published |
2020-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
47.080
Small craft
|
| ISO/CD 23625 |
Small craft — Lithium-ion batteries |
This document provides requirements and recommendations for the selection and installation of lithium-ion batteries for boats. It applies to lithium-ion batteries and to battery systems with a capacity greater than 600 Wh, installed on small craft for providing power for general electrical loads and/or to electric propulsion systems. It is primarily intended for manufacturers and battery installers.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
47.080
Small craft
|
| ISO/TS 23625:2021 |
Small craft — Lithium-ion batteries |
This document provides requirements and recommendations for the selection and installation of lithium-ion batteries for boats. It applies to lithium-ion batteries and to battery systems with a capacity greater than 600 Wh, installed on small craft for providing power for general electrical loads and/or to electric propulsion systems. It is primarily intended for manufacturers and battery installers.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
|
| ISO 25197:2012 |
Small craft — Electrical/electronic control systems for steering, shift and throttle |
ISO 25197:2012 establishes the requirements for design, construction and testing of electrical/electronic steering, shift and throttle and dynamic position control systems, or combinations thereof, on small craft of up to 24 m length of hull.
|
Withdrawn |
2012-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
47.080
Small craft
|
| ISO 25197:2012/Amd 1:2014 |
Small craft — Electrical/electronic control systems for steering, shift and throttle — Amendment 1 |
|
Withdrawn |
2014-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
47.080
Small craft
|
| ISO 25197:2020 |
Small craft — Electrical/electronic control systems for steering, shift and throttle |
This document establishes the requirements for the design, construction and testing of electrical/electronic steering, shift and throttle systems and dynamic positioning control systems, or combinations thereof, on small craft of up to 24 m length of hull.
This document does not apply to electric trolling motors and autopilot systems on sailing craft.
|
Published |
2020-04 |
Edition : 2 |
Number of pages : 22 |
Technical Committee |
47.080
Small craft
|
| ISO 25197:2020/Amd 1:2022 |
Small craft — Electrical/electronic control systems for steering, shift and throttle — Amendment 1 |
|
Published |
2022-10 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
47.080
Small craft
|
| ISO 12402-1:2005 |
Personal flotation devices — Part 1: Lifejackets for seagoing ships — Safety requirements |
ISO 12402-1:2005 specifies the safety requirements for lifejackets intended for use on seagoing ships with regard to the technical provisions of the International Convention for the Safety of Life at Sea.
|
Withdrawn |
2005-09 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-2:2006 |
Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements |
ISO 12402-2:2006 specifies the safety requirements for lifejackets, performance level 275. It applies to lifejackets for adults and children for offshore use under extreme conditions.
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-2:2006/Amd 1:2010 |
Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements — Amendment 1 |
|
Withdrawn |
2010-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-2:2020 |
Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements |
This document specifies the safety requirements for lifejackets, performance level 275. It is applicable to lifejackets for adults, children or infants, for offshore use under severe conditions, or when protective clothing is being used or additional loads are being carried.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-3:2006 |
Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements |
ISO 12402-3:2006 specifies the safety requirements for lifejackets, performance level 150. It applies to lifejackets used by adults or children.
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-3:2006/Amd 1:2010 |
Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements — Amendment 1 |
|
Withdrawn |
2010-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-3:2020 |
Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements |
This document specifies the safety requirements for lifejackets, performance level 150. It is applicable to lifejackets used by adults, children and infants, for general, offshore or rough water use, or when the users are fully clothed.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-4:2006 |
Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements |
ISO 12402-4:2006 specifies the safety requirements for lifejackets, performance level 100. It applies to lifejackets used by adults or children.
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-4:2006/Amd 1:2010 |
Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements — Amendment 1 |
|
Withdrawn |
2010-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-4:2020 |
Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements |
This document specifies the safety requirements for lifejackets, performance level 100. It is applicable to lifejackets used by adults, children and infants, for use in sheltered or calm water, or when the users are fully clothed.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-5:2006 |
Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements |
ISO 12402-5:2006 specifies the safety requirements for buoyancy aids with a buoyancy of not less than 50 N used in sheltered waters with help and rescue close at hand under such circumstances where more bulky or buoyant devices can impair the user's activity. It applies to buoyancy aids used by adults or children. ISO 12402-5:2006 is not applicable to one-piece suits.
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-5:2006/Amd 1:2010 |
Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements — Amendment 1 |
|
Withdrawn |
2010-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-5:2006/Cor 1:2006 |
Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements — Technical Corrigendum 1 |
|
Withdrawn |
2006-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-5:2020 |
Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements |
This document specifies the safety requirements for buoyancy aids, performance level 50. It is applicable to buoyancy aids for adults and children with a body mass greater than 25 kg only, used in sheltered waters.
Buoyancy aids require active participation by the user where help and rescue are close at hand.
One-piece and two-piece inherently buoyant floatation suit PFDs are deemed to qualify as special application devices according to ISO 12402-6:2020.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-6:2006 |
Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods |
ISO 12402-6:2006 specifies the safety requirements and additional test methods for special purpose lifejackets and buoyancy aids (referred to as special purpose devices within ISO 12402-6:2006) in combination with the requirements specified in ISO 12402-2 to ISO 12402-5. It applies to special purpose devices for adults generally and for chidren younger than six years partially.
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-6:2006/Amd 1:2010 |
Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods — Amendment 1 |
|
Withdrawn |
2010-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-6:2020 |
Personal flotation devices — Part 6: Special application lifejackets and buoyancy aids — Safety requirements and additional test methods |
This document specifies the safety requirements and additional test methods for special application lifejackets and buoyancy aids (hereafter named PFD) for adults, children or infants. It is intended to be used in conjunction with ISO 12402‑2:2020, ISO 12402‑3:2020, ISO 12402‑4:2020 and ISO 12402‑5:2020, as applicable.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-7:2006 |
Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods |
ISO 12402-7:2006 specifies the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods.
|
Withdrawn |
2006-11 |
Edition : 1 |
Number of pages : 79 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-7:2006/Amd 1:2011 |
Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods — Amendment 1 |
|
Withdrawn |
2011-04 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-7:2020 |
Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods |
This document specifies the minimum requirements for the construction and performance of materials and components of personal flotation devices, as well as the relevant test methods.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 77 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-8:2006 |
Personal flotation devices — Part 8: Accessories — Safety requirements and test methods |
ISO 12402-8:2006 specifies the safety requirements and test methods for accessories used for personal flotation devices (PFDs), with regard to the technical provisions of the International Convention for the Safety of Life at Sea (SOLAS).
|
Withdrawn |
2006-02 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-8:2006/Amd 1:2011 |
Personal flotation devices — Part 8: Accessories — Safety requirements and test methods — Amendment 1 |
|
Withdrawn |
2011-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-8:2020 |
Personal flotation devices — Part 8: Accessories — Safety requirements and test methods |
This document specifies the safety requirements and test methods for accessories used for personal flotation devices (PFDs).
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-9:2006 |
Personal flotation devices — Part 9: Test methods |
ISO 12402-9:2006 specifies the test methods for personal flotation devices.
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 68 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-9:2006/Amd 1:2011 |
Personal flotation devices — Part 9: Test methods — Amendment 1 |
|
Withdrawn |
2011-04 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-9:2020 |
Personal flotation devices — Part 9: Evaluation |
This document specifies the processes for evaluation of personal flotation devices for fulfilment of the requirements in ISO 12402‑2:2020 to ISO 12402‑6:2020, with which this document is intended to be used.
The classification of PFDs used in the ISO 12402 series:2020 is given in Annex A for information.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 83 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-10:2006 |
Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices |
ISO 12402-10:2006 gives guidance for the selection and application of personal flotation devices complying with the other relevant parts of ISO 12402 and immersion suits according to ISO 15027-1 to ISO 15027-3.
|
Withdrawn |
2006-02 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 12402-10:2020 |
Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices |
This document provides requirements and recommendations for the selection and application of both personal flotation devices (PFD) complying with the relevant Parts of the ISO 12402 series:2020, and immersion suits according to ISO 15027 (all parts):2012.
It is intended to assist manufacturers, suppliers, users and regulators in the appropriate selection and application of those garments for the circumstances in which they will be used.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO 18079-1:2018 |
Ships and marine technology — Servicing of inflatable life-saving appliances — Part 1: General |
This document, in conjunction with ISO 18079‑2, ISO 18079‑3, ISO 18079‑4 and ISO 18079‑5, states general provisions for servicing stations for inflatable life-saving appliances including, but not limited to, those subject to SOLAS III/20.8.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
47.080
Small craft
;
13.340.70
Lifejackets, buoyancy aids and flotation devices
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO 18079-3:2018 |
Ships and marine technology — Servicing of inflatable life-saving appliances — Part 3: Inflatable lifejackets |
This document, in conjunction with ISO 18079‑1, provides provisions for servicing stations conducting servicing of inflatable lifejackets, including, but not limited to, those subject to SOLAS III/20.8.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.340.70
Lifejackets, buoyancy aids and flotation devices
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO 19912:2019 |
Ships and marine technology — Servicing of immersion suits, anti-exposure suits and constant wear suits |
This document, in conjunction with ISO 18079-1, specifies provisions for servicing stations conducting servicing of immersion suits, anti-exposure suits and constant wear suits, including, but not limited to, those subject to IMO regulations, recommendations and guidelines.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.10
Protective clothing
;
13.340.70
Lifejackets, buoyancy aids and flotation devices
|
| ISO/R 103:1959 |
Withdrawal of ISO/R 103-1959 |
|
Withdrawn |
1959-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
49.020
Aircraft and space vehicles in general
|
| ISO/R 130:1959 |
Withdrawal of ISO/R 130-1959 |
|
Withdrawn |
1959-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
49.020
Aircraft and space vehicles in general
|
| ISO/R 224:1961 |
Standard form of declaration of performance of aircraft electrical equipment |
|
Withdrawn |
1961-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
49.020
Aircraft and space vehicles in general
|
| ISO/TR 224:1998 |
Aircraft — Declaration of design and performance for aircraft equipment — Standard form |
|
Withdrawn |
1998-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
49.020
Aircraft and space vehicles in general
|
| ISO/R 267:1962 |
Withdrawal of ISO/R 267-1962 |
|
Withdrawn |
1962-08 |
Edition : 1 |
|
Technical Committee |
49.020
Aircraft and space vehicles in general
|
| ISO/R 414:1965 |
Withdrawal of ISO/R 414-1965 |
|
Withdrawn |
1965-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
49.020
Aircraft and space vehicles in general
|
| ISO/R 440:1969 |
Withdrawal of ISO/R 440-1969 |
|
Withdrawn |
1969-04 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
49.020
Aircraft and space vehicles in general
|
| ISO/R 470:1966 |
Withdrawal of ISO/R 470-1966 |
|
Withdrawn |
1966-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
49.020
Aircraft and space vehicles in general
|
| ISO 1151-1:1988 |
Flight dynamics — Concepts, quantities and symbols — Part 1: Aircraft motion relative to the air |
Gives basic definitions and deals with motion relative to the atmosphere, assumed to be at rest or in translational motion at constant velocity relative to the Earth. The aircraft is assumed to be rigid. However, most of the definitions can be applied to the case of a flexible aircraft. Describes axis systems, angles, velocities and angular velocities, aircraft inertia, forces, moments, coefficients and load factors, thrust, resultant moment of propulsive force, coefficients thereof, control forces and moments, motivators and their forces and moments.
|
Published |
1988-04 |
Edition : 4 |
Number of pages : 29 |
Technical Committee |
01.060
Quantities and units
;
49.020
Aircraft and space vehicles in general
|