| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 16525-8:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 8: Electrochemical-migration test methods |
ISO 16525-8:2014 specifies test methods for confirming the occurrence of electrochemical migration in electrically isotropic conductive adhesives at high-temperature and humidity. The electrical resistance is also determined.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
83.180
Adhesives
|
| ISO 16525-9:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 9: Determination of high-speed signal-transmission characteristics |
ISO 16525-9:2014 specifies test methods to investigate the high-speed signal-transmission characteristics in the bonded portions of an isotropic electrically conductive adhesive, which joins the terminals of a surface mounted device (SMD) and the land grid patterns of a printed circuit board. It also investigates the characteristics of wiring with an isotropic electrically conductive adhesive, which can be applied on to the printed circuit board.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 45 |
Technical Committee |
83.180
Adhesives
|
| ISO 17087:2006 |
Specifications for adhesives used for finger joints in non-structural lumber products |
ISO 17087:2006 specifies performance levels for adhesives to be used in finger joints in nonstructural bonded lumber products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts, and bonded lumber panels. Adhesives that meet the requirements of the various performance classes are considered capable of providing an adequate bond for use under the conditions described for the class. This specification is intended to be used to evaluate adhesives as well as the adhesive bonds in the finger joints.
|
Published |
2006-11 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
83.180
Adhesives
|
| ISO 17178:2013 |
Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements |
ISO 17178:2013 specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength, tensile strength to be achieved with these adhesives.
ISO 17178:2013 does not refer to the selection and installation of parquet floorings.
|
Published |
2013-04 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 17194:2007 |
Structural adhesives — A standard database of properties |
ISO 17194:2007 specifies a set of basic properties commonly required for the selection and use of structural adhesives in different applications. ISO standard test methods and test conditions are also recommended for the measurement of these data to facilitate traceability of recorded values.
|
Withdrawn |
2007-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 17194:2022 |
Structural adhesives — Standard database of properties |
This document specifies a set of basic properties commonly required for the selection and use of structural adhesives in different applications. ISO standard test methods and test conditions are also reviewed for the measurement of these data to facilitate traceability of recorded values (see Introduction).
|
Published |
2022-02 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 17212:2004 |
Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding |
ISO 17212:2004 provides and describes the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation or the process of construction. It is applicable to metal and plastic surfaces that are commonly encountered.
|
Withdrawn |
2004-05 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
83.180
Adhesives
|
| ISO 17212:2012 |
Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding |
ISO 17212:2012 provides and describes the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation or the process of construction. It is applicable to metal and plastic surfaces that are commonly encountered.
|
Published |
2012-02 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
83.180
Adhesives
|
| ISO 19095-1:2015 |
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 1: Guidelines for the approach |
ISO 19095:2015 specifies the evaluation methods for the adhesion interface performance in plastic-metal assemblies.
|
Published |
2015-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 19095-2:2015 |
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 2: Test specimens |
ISO 19095-2:2015 specifies the test specimens for the evaluation of the adhesion interface performance in plastic-metal assemblies.
|
Published |
2015-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 19095-3:2015 |
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods |
ISO 19095-3:2015 specifies the test methods for the adhesion interface performance in plastic-metal assemblies.
|
Published |
2015-08 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
83.180
Adhesives
|
| ISO 19095-4:2015 |
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 4: Environmental conditions for durability |
ISO 19095-4:2015 specifies the environmental conditions to evaluate the durability for the adhesion interface performance in plastic-metal assemblies.
|
Published |
2015-08 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
83.180
Adhesives
|
| ISO 19095-5:2023 |
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 5: Fracture energy |
This document specifies a method of testing the adhesion in plastic-metal joints produced by several techniques: adhesive bonding, direct joining of thermoplastics by injection or compression moulding, or other methods. More specifically this testing method provides a measure of the joint resistance to fracture in the region between plastic and metal adherends.
This method can only be used for comparing adhesives, surface treatments, bonding conditions and effects of environmental conditions. The results cannot be used for engineering design purposes.
|
Published |
2023-02 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
83.180
Adhesives
|
| ISO 19095-6:2021 |
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 6: Accelerated degradation test |
This document specifies the environmental conditions to evaluate the accelerated degradation for the adhesion interface performance in plastic-metal assemblies.
|
Published |
2021-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 19209:2017 |
Adhesives — Classification of thermoplastic wood adhesives for non-structural applications |
ISO 19209:2017 classifies thermoplastic resin-based wood adhesives for non-structural applications into durability classes D1 to D4 based on the dry and wet strengths of bond lines measured under specified conditions after various conditioning treatments.
For special applications, further tests that do not fall within the scope of ISO 19209:2017 can be applicable.
The adhesives specified in ISO 19209:2017 are suitable for the bonding of furniture and interior structures, panelling, doors, windows, stairs, etc. made of wood or derived timber products.
ISO 19209:2017 does not specify the temperature resistance of bond lines.
|
Published |
2017-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 19210:2017 |
Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints |
ISO 19210:2017 specifies tests for adhesives for wood and derived timber products for the assessment of their resistance to hot and cold water. It can be used for the assessment of the strength of bonds with a thin bond line. It does not apply to adhesives for structural use or to the manufacture of particleboards, fibreboards and plywood. It does not replace tests on finished products.
|
Published |
2017-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 19212:2006 |
Adhesives — Determination of temperature dependence of shear strength |
ISO 19212:2006 specifies methods for determining the temperature dependence of the shear strength of the adhesive or adhesive bond in adhesively bonded products.
|
Published |
2006-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 21194:2019 |
Elastic adhesives — Testing of adhesively bonded joints — Bead peel test |
This document specifies a method for evaluating the adhesion of elastic adhesives and sealants [with a minimum elongation at break of 100 % and a modulus of elasticity of maximum 10 MPa[1]] on various substrates. In this way, the effect of various coatings or the surface pre-treatments of the substrate materials on the adhesion can be compared. It can also be used to evaluate the influence of pre-treatment, substrate and adhesive on the long-term durability of adhesively bonded joints and seals. This test can also be used for process monitoring and quality assurance accompanying production.
[1] The elongation and modulus of elasticity are measured according to ISO 527-2.
|
Published |
2019-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 21368:2005 |
Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures |
ISO 21368:2005 provides guidelines describing adhesive bonding quality requirements suitable for use by manufacturers utilizing adhesive bonding as a means of fabrication. In particular, the guidelines define various approaches to meeting quality requirements for fabrication and reporting procedures, both in workshops and on site. These guidelines aim to convey the importance of maintaining quality standards in fabrication and reporting procedures, keeping records and thus enabling documentation to provide the basis for risk evaluation of adhesively bonded structures in service and in use.
|
Withdrawn |
2005-10 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
83.180
Adhesives
|
| ISO 21368:2022 |
Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures |
This document provides guidelines describing the adhesive bonding quality requirements suitable for use by adhesive user-companies utilizing adhesive bonding as a means of fabrication. In particular, the guidelines define various approaches to meeting quality requirements for fabrication and reporting procedures, both in workshops and on site. These guidelines aim to convey the importance of maintaining quality standards in fabrication and reporting procedures, keeping records and thus enabling documentation to provide the basis for risk evaluation of adhesively bonded structures in service and in use.
These guidelines have been prepared such that:
a) they are independent of the type of adhesively bonded structure;
b) they are independent of adhesive user-companies’ and suppliers’ product recommendations;
c) they define the quality requirements for adhesive bonding in terms of fabrication and reporting procedures, both in workshops and on site;
d) they can be used as the basis for risk evaluation of adhesively bonded structures in service and in use;
e) they can be used as a basis for assessing a fabricator's capability to produce adhesively bonded structures fulfilling specified quality requirements when they are detailed in one or more of the following:
— a contract between the parties involved;
— an application standard;
— a regulatory statement.
The guidelines contained within this document can be adopted in full or selectively chosen by the adhesive user to suit the structure concerned. The guidelines provide a flexible framework for the control of adhesive bonding activities in the following cases.
Case 1
The provision of specific requirements for adhesive bonding in contracts that require the adhesive user to have a quality system other than ISO 9001.
Case 2
The provision of specific requirements for adhesive bonding as guidance to an adhesive user developing a quality system.
Case 3
The provision of specific requirements for references in application standards that uses adhesive bonding as part of its requirements or in a contract between relevant parties.
Case 4
The provision of a framework for fabrication and reporting procedures to a quality standard, suitable in particular as a basis for the risk evaluation of adhesively bonded structures.
|
Published |
2022-03 |
Edition : 2 |
Number of pages : 100 |
Technical Committee |
83.180
Adhesives
|
| ISO 21760-1:2019 |
Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 1: Adhesive film preparation methods |
This document specifies six methods for determining the water vapour transmission rate of adhesive films coated on a plastic substrate.
The adhesive is used in organic electronic devices such as organic light-emitting diodes.
The methods provide rapid measurement over a wide range of water vapour transmission rates.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 21760-2:2019 |
Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 2: Edge seal methods |
This document specifies four methods for determining the water vapour transmission rate through the cross-section of an adhesive for edge seal in organic electronic devices, such as organic light emitting diodes and organic photovoltaic cells.
The methods provide rapid measurement over a wide range of water vapour transmission rates.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 22631:2019 |
Adhesives — Test methods for adhesives for floor and wall coverings — Peel test |
This document specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under peel forces. The term "wall covering" does not include any type of wallpaper.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
83.180
Adhesives
|
| ISO 22632:2019 |
Adhesives — Test methods for adhesives for floor and wall coverings — Shear test |
This document specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under shear forces. The term "wall covering" does not include any type of wallpaper.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 22633:2019 |
Adhesives — Test methods for adhesives for floor coverings and wall coverings — Determination of the dimensional changes of a linoleum floor covering in contact with an adhesive |
This document specifies a test method to measure the dimensional changes of a linoleum floorcovering while being adhered to a glass substrate. This method is to be used in conjunction with other test methods and not used solely to determine the suitability of a particular adhesive/linoleum combination.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 22635:2019 |
Adhesives — Test methods for adhesives for plastic or rubber floor coverings or wall coverings — Determination of dimensional changes after accelerated ageing |
This document specifies a test method that measures the dimensional changes of a plastic or rubber floor or wall covering bonded to a given substrate after accelerated ageing. The term "wall covering" does not include any type of wallpaper.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 22636:2020 |
Adhesives — Adhesives for floor coverings — Requirements for mechanical and electrical performance |
This document specifies characteristics for adhesives for floor coverings, which comprise:
— resilient floor coverings (such as those manufactured from plastics, linoleum or rubber);
— textile floor coverings.
Adhesives for floor coverings are intended for use within a building according to the manufacturer's specification.
This document specifies requirements for establishing performance characteristics of adhesives for floor coverings with regard to their determination, evaluation and expression.
This document comprises all kinds of adhesives for floor coverings irrespective of the chemical composition and the mechanism of setting. Products according to this document can be put on the market as liquids, pastes and film adhesives for floor coverings. The products can be one-component or multi-component.
This document also defines a special kind of adhesives for floor coverings, which facilitate the easy removal of the floor covering after the utilization and where the need for a permanent bond is not always required. These types of floor covering adhesives are referred to as low peel strength, release bond adhesives.
This document does not:
— cover adhesives for bonding parquet to the subfloor, adhesives for bonding laminate floor coverings and adhesives for ceramic tiles;
— make provisions for testing the bond strength of low peel strength, release bond adhesives for floor coverings;
— take account of all influences which may occur in practice.
|
Published |
2020-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 22637:2019 |
Adhesives — Test of adhesive for floor covering — Determination of the electrical resistance of adhesive films and composites |
This document specifies a test method to measure the electrical resistance as a material physical parameter of an adhesive film and composites of floor covering material and adhesive film. The electrical resistance is reciprocal to the electrical conductivity. This laboratory method does not take account of all influences which can occur in practice.
This method applies to the determination of the electrical resistance of adhesive films on glass and of composites of floor coverings, adhesively bonded to a fibre cement substrate R4 and R5 (see Clause 3).
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 29864:2007 |
Self adhesive tapes — Measurement of breaking strength and elongation at break |
ISO 29864:2007 specifies methods to measure the breaking strength and elongation at break of a self-adhesive tape when it is subjected to a tensile force sufficient to cause it to break.
|
Withdrawn |
2007-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|
| ISO 24564:2022 |
Space systems — Adhesives — General requirements |
This document specifies general requirements for adhesive selection with the adhesive bonding process and quality assurance used in space systems.
This document can be applied to different types of adhesive materials in space systems, such as launch vehicles, satellites, spacecraft and space station for the following applications: bonding, components embedding (only for space application), sealing, fixing and repairing.
|
Published |
2022-11 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
49.140
Space systems and operations
;
83.180
Adhesives
|
| ISO 25179:2010 |
Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives |
ISO 25179:2010 specifies a test method for the determination of the solubility of a water-soluble pressure-sensitive adhesive in water or the solubility of an alkali-soluble pressure-sensitive adhesive in alkali by measuring the loss in mass of the adhesive when immersed in water or alkali. The solubility of the adhesive is one of the key factors in assessing the possibility of recycling products to which labels are fixed using a pressure-sensitive adhesive.
|
Withdrawn |
2010-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
83.180
Adhesives
|
| ISO 25179:2018 |
Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives |
This document specifies a test method for the determination of the solubility of a water-soluble pressure-sensitive adhesive in water or the solubility of an alkali-soluble pressure-sensitive adhesive in alkali by measuring the loss in mass of the adhesive when immersed in water or alkali. The solubility of the adhesive is one of the key factors in assessing the possibility of recycling products to which labels are fixed using a pressure-sensitive adhesive.
|
Published |
2018-07 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 25217:2009 |
Adhesives — Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens |
ISO 25217:2009 specifies a method, based upon linear elastic fracture mechanics (LEFM), for the determination of the fracture resistance of structural adhesive joints under an applied mode I opening load, using double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens.
|
Published |
2009-05 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
83.180
Adhesives
|
| ISO 26842-1:2009 |
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments |
ISO 26842-1:2009 gives guidelines for the selection, by means of delamination-resistance tests, of adhesives for use in wood products placed in non-severe environments, indoors or during transport, in which the products are not exposed to extreme changes in temperature and humidity.
A series of exposure cycles at various temperatures and humidities is provided to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary requirements for resistance to delamination.
ISO 26842-1:2009 is intended to help the user not only to select a suitable adhesive but also to evaluate adhesives and adhesively bonded wood products.
It is not intended for use in the qualification of structural components.
|
Withdrawn |
2009-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 26842-1:2013 |
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments |
ISO 26842-1:2013 gives guidelines to select, by means of delamination-resistance tests, adhesive/wood combinations in non-severe environments in which the products are not exposed to extreme changes in temperature and humidity. A series of exposure cycles at various temperature and humidity values is provided to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary requirements for resistance to delamination.
|
Withdrawn |
2013-06 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 26842-1:2020 |
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments |
This document gives guidelines to select, by means of delamination-resistance tests, adhesive/wood combinations for use in wood products placed in non-severe environments, in which the products are not exposed to extreme changes in temperature and humidity.
This document provides a series of exposure cycles at various temperature and humidity values to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary requirements for resistance to delamination.
This document is intended to help the user not only to select a suitable adhesive, but also to evaluate adhesives and adhesively bonded wood products.
NOTE When actual wood products are tested using this method, the test results might not be comparable because the test laboratory do not normally have had adequate control over the way the product was assembled.
This document is not intended for use in the qualification of structural components.
|
Published |
2020-05 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO/R 169:1960 |
Sizes of photocopies (on paper) readable without optical devices |
|
Withdrawn |
1960-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.080
Document imaging applications
;
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO/R 73:1958 |
Withdrawal of ISO/R 73-1958 |
|
Withdrawn |
1958-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.060.20
Motion picture films. Cartridges
|
| ISO 26842-2:2009 |
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments |
ISO 26842-2:2009 gives guidelines for the selection, by means of delamination-resistance tests, of adhesives for use in wood products placed in severe environments, indoors or during transport, in which the products are exposed to extreme changes of temperature and humidity.
A series of exposure cycles at various temperatures and humidities is provided to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary requirements for resistance to delamination.
ISO 26842-2:2009 is intended to help the user not only to select a suitable adhesive but also to evaluate adhesives and adhesively bonded wood products.
It is not intended for use in the qualification of structural components.
|
Withdrawn |
2009-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 26842-2:2013 |
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments |
ISO 26842-2:2013 gives guidelines to select, by means of delamination-resistance tests, adhesive/wood combinations for use in wood products placed in severe environments, in which the products are exposed to extreme change of temperature and humidity. A series of exposure cycles at various temperature and humidity values is provided to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary requirements for resistance to delamination.
|
Withdrawn |
2013-06 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 26842-2:2020 |
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments |
This document gives guidelines to select, by means of delamination-resistance tests, adhesive/wood combinations for use in wood products placed in severe environments, in which the products are exposed to extreme change of temperature and humidity. A series of exposure cycles at various temperature and humidity values is provided to verify that the adhesive selected, or a product bonded with the adhesive, meets the necessary requirements for resistance to delamination.
This document is intended to help the user not only to select a suitable adhesive, but also to evaluate adhesives and adhesively bonded wood products.
NOTE When actual wood products are tested using this method, the test results might not be comparable because the test laboratory do not normally have had adequate control over the way the product was assembled.
This document is not intended for use in the qualification of structural components.
|
Published |
2020-05 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 29862:2007 |
Self adhesive tapes — Determination of peel adhesion properties |
ISO 29862:2007 specifies a series of methods for the determination of the peel adhesion properties of self-adhesive tapes.
|
Withdrawn |
2007-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
83.180
Adhesives
|
| ISO 29862:2018 |
Self adhesive tapes — Determination of peel adhesion properties |
This document specifies a series of methods for the determination of peel adhesion properties of self adhesives tapes.
This document contains:
— Method 1: Self adhesive tapes ? Measurement of peel adhesion from stainless steel at an angle of 180°;
— Method 2: Self adhesive tapes ? Measurement of peel adhesion from its own backing at an angle of 180°;
— Method 3: Self adhesive tapes ? Measurement of peel adhesion of double sided and transfer tapes at an angle 180°;
— Method 4: Self adhesive tapes ? Measurement of adhesion of the liner to an adhesive tape at an angle of 180°.
Annexes A and B specify further variations in the testing protocol according to specific conditions.
|
Published |
2018-05 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
83.180
Adhesives
|
| ISO 29863:2007 |
Self adhesive tapes — Measurement of static shear adhesion |
ISO 29863:2007 specifies a series of methods for the determination of the ability of a pressure-sensitive tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate.
|
Withdrawn |
2007-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
83.180
Adhesives
|
| ISO 29863:2018 |
Self adhesive tapes — Measurement of static shear adhesion |
This document specifies a series of methods for the determination of the ability of a pressure sensitive tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate.
This document contains:
— method A: Self adhesive tapes ? Measurement of shear adhesion to a vertical standard steel panel;
— method B: Self adhesive tapes ? Measurement of shear adhesion to a vertical panel covered with NIST SRM 1810A[1] standard fibreboard;
— method C: Self adhesive tapes ? Measurement of shear adhesion to a vertical panel covered with a fibreboard agreed upon by the buyer and seller;
— method D: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal standard steel panel;
— method E: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal panel covered with NIST SRM 1810A1) standard fibreboard;
— method F: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal panel covered with a fibreboard agreed upon by the buyer and seller;
— method G: Self adhesive tapes ? Measurement of shear adhesion to a vertical standard steel panel at elevated temperature after a 10 min dwell time.
[1] NIST SRM 1810A is National Institute of Standards and Technology ? Standard Reference Material 1810A and is available from the Institute at Gaithersburg, Maryland MD 20899, USA.
|
Published |
2018-05 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
83.180
Adhesives
|
| ISO 29864:2018 |
Self adhesive tapes — Measurement of breaking strength and elongation at break |
This document specifies methods to measure the breaking strength and elongation at break of a self adhesive tape when it is subjected to a tensile force sufficient to cause it to break.
These test methods describe a procedure for testing 12 mm or 24 mm wide samples cut from supplied rolls of self adhesive tapes. Alternatively rolls of self adhesive tape up to 50 mm wide can be directly tested in their original width. In these circumstances the practical breaking strength and elongation will be typical of the manufacturer's cut edges. When newly cut sample pieces are tested, because of the better cutting of the edges, the results can be higher than would be found on commercial tape.
|
Published |
2018-05 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO/DIS 34256 |
Adhesives for non-structural wood applications — Test method and requirements for resistance to static load |
|
Under development |
|
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO/DIS 34257 |
Adhesives — Wood adhesives — Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
|
Under development |
|
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 5-1:1984 |
Photography — Density measurements — Part 1: Terms, symbols and notations |
Specifies definitions, symbols, notations and a coordinate system for applications in photography and radiometry to describe the geometric factors affecting optical transmission and reflection measures. Provides a system for describing methods of measuring or specifying the transmission and reflection properties of photographic materials.
|
Withdrawn |
1984-03 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 5-2:1985 |
Photography — Density measurements — Part 2: Geometric conditions for transmission density |
|
Withdrawn |
1985-06 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 5-2:1991 |
Photography — Density measurements — Part 2: Geometric conditions for transmission density |
|
Withdrawn |
1991-12 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 5-2:2001 |
Photography — Density measurements — Part 2: Geometric conditions for transmission density |
|
Withdrawn |
2001-06 |
Edition : 4 |
Number of pages : 13 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 5-3:1984 |
Photography — Density measurements — Part 3: Spectral conditions |
|
Withdrawn |
1984-08 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 5-3:1995 |
Photography — Density measurements — Part 3: Spectral conditions |
Specifies spectral conditions for the measurement of several types of densities used in photographic image reproduction. Has been expanded to include additional spectral types. Replaces the first edition which has been technically revised.
|
Withdrawn |
1995-11 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 5-4:1983 |
Photography — Density measurements — Part 4: Geometric conditions for reflection density |
|
Withdrawn |
1983-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 5-4:1995 |
Photography — Density measurements — Part 4: Geometric conditions for reflection density |
Cancels and replaces the first edition (1983). Specifies the geometric conditions for measuring the reflection density of photographic and graphic art materials. Specifies illumination at all azimuth angles. Does not cover those situations where light has been deliberately polarized. Also applicable to the measurement of these characteristics for other materials.
|
Withdrawn |
1995-05 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 5:1974 |
Photography — Determination of diffuse transmission density |
|
Withdrawn |
1974-10 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 6:1974 |
Photography — Determination of ISO speed of monochrome (black-and-white), continuous-tone photographic negative materials for still photography |
|
Withdrawn |
1974-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 6:1993 |
Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed |
Specified is a sensitometric method for determining and expressing the speed of photographic negative materials.
|
Published |
1993-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 417:1977 |
Photography — Determination of thiosulphate and other residual chemicals in processed photographic films, plates and papers — Methylene blue photometric method and silver sulphide densitometric method |
|
Withdrawn |
1977-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
;
37.040.30
Photographic chemicals
|
| ISO 417:1993 |
Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide |
|
Withdrawn |
1993-04 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
;
37.040.30
Photographic chemicals
|
| ISO/R 421:1965 |
Withdrawal of ISO/R 421-1965 |
|
Withdrawn |
1965-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 425:1973 |
Photography — Sensitized materials — Quantity packaging |
|
Withdrawn |
1973-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 543:1990 |
Photography — Photographic films — Specifications for safety film |
|
Withdrawn |
1990-11 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 686:1985 |
Photography — 35 mm filmstrips — Specifications for double-frame and single-frame formats |
Establishes a parity of aspect ratios between the double-frame and single-frame formats from the same artwork or master material. To facilitate the production of filmstrips from a series of slides, the dimensions of the double-frame format have been selected as the mask aperture size of the nominal 24 mm by 36 mm picture area.
|
Withdrawn |
1985-01 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO/R 686:1968 |
35 mm filmstrips — Dimensions and formats |
|
Withdrawn |
1968-03 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 732:1982 |
Photography — Dimensions for 127, 120 and 620 roll film, backing paper and film spools |
|
Withdrawn |
1982-12 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 732:1991 |
Photography — Film dimensions — 120 and 220 sizes |
|
Withdrawn |
1991-07 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 732:2000 |
Photography — 120-size and 220-size films — Dimensions |
This International Standard provides specifications for
_ dimensions of 120-size and 220-size films and of the spools common to both,
_ dimensions of the backing paper for 120-size film and the leader and trailer paper for 220-size film, as well as
the placement of the paster tape used for attaching these papers to the films,
_ minimum length of film required in front of the leading edge of the first image and behind the trailing edge of
the last image, and
_ markings on the backing paper and the trailer-paper for identification of the intended photofinishing process.
|
Published |
2000-11 |
Edition : 4 |
Number of pages : 12 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 897:1973 |
Photography — Edge-marked roll film — Identification of the emulsion side |
|
Withdrawn |
1973-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 897:1988 |
Photography — Roll films, 126, 110 and 135 size films — Identification of the image-bearing side |
|
Withdrawn |
1988-09 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 897:2000 |
Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side |
This International Standard specifies different means of identification of the image-bearing side of roll films and
126, 110 and 135-size films that carry edge markings.
This International Standard is not applicable to cinematographic films.
|
Published |
2000-10 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1007:1979 |
Photography — 135-size film and magazine — Specification |
|
Withdrawn |
1979-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1007:1995 |
Photography — 135-size film and magazine — Specifications |
|
Withdrawn |
1995-10 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1007:2000 |
Photography — 135-size film and magazine — Specifications |
This International Standard specifies the following:
_ dimensions of film lengths;
_ latent-image frame numbering;
_ latent-image digital bar-codes to identify the film DX number;
_ dimensions of daylight-loading film magazines for use with 135-size cameras;
_ a magazine bar-code that identifies the film's DX number as well as the number of exposures;
_ camera auto-sensing areas, which provide an electrically readable encodement of film speed, number of
exposures, and recommended exposure latitude for use with appropriately designed cameras;
_ an information panel on which the film identification, speed and number of exposures are visible through a
window in the back of appropriately designed cameras;
_ film pull-out force specification;
_ film-spool attachment strength specification.
This International Standard is not intended to apply to "bulk" 35-mm film used for reloading into 135-size
magazines, nor to the reloadable magazines themselves. Also, this standard does not apply to 135-size film and
magazines that are used in single-use camera applications.
|
Published |
2000-06 |
Edition : 3 |
Number of pages : 38 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1008:1973 |
Photography — Black-and-white paper for general use — Sizes of sheet material |
|
Withdrawn |
1973-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1008:1992 |
Photography — Paper dimensions — Pictorial sheets |
Specifies the nominal sizes and aim dimensions, with their cutting tolerances, of papers in sheets. Includes a method for checking the squareness of the sheets and straightness of their edges.
|
Published |
1992-01 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1009:1992 |
Photography — Paper dimensions — Rolls for printers |
|
Withdrawn |
1992-01 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
;
37.100.20
Materials for graphic technology
|
| ISO 1009:2000 |
Photography — Paper dimensions — Rolls for printers |
This International Standard specifies the aim and tolerance values for the nominal widths of rolls of black-and-white
and colour photographic papers for use in contact and projection printers.
It also specifies splice parameters, core dimensions, requirements for winding, and package marking.
|
Published |
2000-12 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
;
37.100.20
Materials for graphic technology
|
| ISO 1010:1973 |
Photography — Colour paper for general use — Sizes of sheet material |
|
Withdrawn |
1973-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1011:1973 |
Photography — Colour paper for roll paper printers — Sizes of rolls |
|
Withdrawn |
1973-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1012:1973 |
Photography — Colour film for general use — Sizes of sheet material |
|
Withdrawn |
1973-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1012:1991 |
Photography — Film dimensions — Pictorial sheets |
|
Withdrawn |
1991-05 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1012:1998 |
Photography — Films in sheets and rolls for general use — Dimensions |
This International Standard specifies the nominal sizes and aim dimensions, with their cutting tolerances, of photographic films in rolls and sheets for use in general photographic applications. It also specifies perforating dimensions and selected core dimensions and includes a section on package marking. NOTE Films used for specific photographic applications, such as radiography, graphic arts, micrography, aerial photography, documentary reproduction and on recording instruments, are specified in other International Standards.
|
Published |
1998-11 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1048:1973 |
Photography — Exposed colour roll film — Identification |
|
Withdrawn |
1973-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 1048:1991 |
Photography — Exposed roll films — Identification |
|
Withdrawn |
1991-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 2240:1982 |
Photography — Colour reversal camera films — Determination of ISO speed |
|
Withdrawn |
1982-07 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 2240:1994 |
Photography — Colour reversal camera films — Determination of ISO speed |
Cancels and replaces the first edition (1982). Gives the method for determining the ISO speed of colour reversal camera films producing continuous-tone pictorial images that are intended to be viewed on transparency illuminators or by projection as slides. Also applies to 8 mm and 16 mm motion-picture films used in non-professional applications. Does not apply to professional motion-picture films regardless of their applications.
|
Withdrawn |
1994-08 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 2240:2003 |
Photography — Colour reversal camera films — Determination of ISO speed |
ISO 2240:2003 specifies the method for determining the ISO speed of colour reversal camera films producing continuous-tone pictorial images that are intended to be viewed on transparency illuminators or by projection as slides. It also applies to 8 mm and 16 mm motion-picture films used in non-professional applications.
ISO 2240:2003 is not applicable to professional motion-picture films regardless of their applications.
|
Published |
2003-10 |
Edition : 4 |
Number of pages : 8 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 2803:1974 |
Photography — Silver-gelatin type microfilms — Processing and storage for archival purposes |
|
Withdrawn |
1974-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3029:1983 |
Photography — 126-size cartridges — Dimensions of cartridge, film and backing paper |
|
Withdrawn |
1983-08 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3029:1995 |
Photography — 126-size cartridges — Dimensions of cartridge, film and backing paper |
|
Withdrawn |
1995-01 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3029:1995/Cor 1:1998 |
Photography — 126-size cartridges — Dimensions of cartridge, film and backing paper — Technical Corrigendum 1 |
|
Withdrawn |
1998-09 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3664:1975 |
Photography — Illumination conditions for viewing colour transparencies and their reproductions |
|
Withdrawn |
1975-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3665:1976 |
Photography — Intra-oral dental radiographic film — Specification |
|
Withdrawn |
1976-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.040.50
Radiographic equipment
;
11.060.20
Dental equipment
;
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3772:1976 |
Photography — Films (in rolls) for phototypesetting and photolettering devices — Dimensions |
|
Withdrawn |
1976-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3772:1991 |
Photography — Film dimensions — Rolls for photocomposition |
|
Withdrawn |
1991-06 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
;
37.100.20
Materials for graphic technology
|
| ISO 3772:2000 |
Photography — Rolls of sensitized material for the pre-press industry — Dimensions and related requirements |
This International Standard specifies the dimensions of sensitized materials, cores and disposable cassettes, and
describes package marking for sensitized materials, including those for electronic scanners or image-setting
devices and those materials supplied in disposable cassettes.
It is applicable to photographic sensitized materials in rolls for use in the pre-press industry.
|
Published |
2000-10 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3897:1976 |
Photography — Silver image photographic plates for record purposes — Storage conditions |
|
Withdrawn |
1976-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 3897:1986 |
Photography — Processed photographic plates — Storage practices |
|
Withdrawn |
1986-09 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|