| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 28219:2009 |
Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols |
ISO 28219:2009
defines minimum requirements for identifying items;
provides guidelines for item marking with machine-readable symbols;
covers both labels and direct marking of items;
includes testing procedures for label adhesive characteristics and mark durability;
provides guidance for the formatting on the label of data presented in linear bar code, two-dimensional symbol or human readable form;
is intended for applications which include, but are not limited to, support of systems that automate the control of items during the processes of:
production;
inventory;
distribution;
field service;
point of sale;
repair, and
is intended to include, but it is not limited to, multiple industries including:
automotive;
aerospace;
chemical;
consumer items;
electronics;
health care;
marine;
rail;
telecommunications.
The location and application method of the marking are not defined (these will be reviewed and agreed upon by suppliers and manufacturers and their trading partners before implementing ISO 28219:2009 ).
ISO 28219:2009 does not supersede or replace any applicable safety or regulatory marking or labeling requirements. ISO 28219:2009 is meant to satisfy the minimum item marking requirements of numerous applications and industry groups and as such its applicability is to a wide range of industries, each of which may have specific implementation guidelines for it. ISO 28219:2009 is to be applied in addition to any other mandated labeling direct-marking requirements.
The labeling and direct marking requirement of ISO 28219:2009 and other standards can be combined labeling into one label or marking area or appear as separate labels or marking areas.
ISO 28219:2009 uses the terms “part marking” and “item marking” interchangeably. Unless otherwise stated, this document will use the term “item marking” to describe both the labeling and direct part marking (DPM) of an item, where DPM includes, but is not limited to, altering (e.g. dot peen, laser etch, chemical etch) as well as additive type processes (e.g. ink jet, vacuum deposition).
The purpose of ISO 28219:2009 is to establish the machine-readable (linear, two dimensional, and composite symbols) and human readable content for direct marking and labeling of items, parts, and components.
ISO 28219:2009 provides a means for items, parts and components to be marked, and read in either fixtured or handheld scanning environments at any manufacturer's facility and then read by customers purchasing items for subsequent manufacturing operations or for final end use. Intended applications include, but are not limited to supply chain applications, e.g. inventory, distribution, manufacturing, quality control, acquisition, transportation, supply, repair, and disposal.
|
Withdrawn |
2009-01 |
Edition : 1 |
Number of pages : 49 |
Technical Committee |
55.020
Packaging and distribution of goods in general
;
35.040.50
Automatic identification and data capture techniques
|
| ISO 28219:2017 |
Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols |
ISO 28219:2017
- defines minimum requirements for identifying items,
- provides guidelines for item marking with machine-readable symbols,
- covers both labels and direct marking of items,
- includes testing procedures for label adhesive characteristics and mark durability,
- provides guidance for the formatting on the label of data presented in linear bar code, two-dimensional symbol or human-readable form,
- is intended for applications which include, but are not limited to, support of systems that automate the control of items during the processes of:
- production,
- inventory,
- distribution,
- field service,
- point of sale,
- point of care,
- repair, and
- is intended to include, but it is not limited to, multiple industries including:
- automotive,
- aerospace,
- chemical,
- consumer items,
- electronics,
- health care,
- marine,
- rail,
- telecommunications.
The location and application method of the marking are not defined (these will be reviewed and agreed upon by suppliers and manufacturers and their trading partners before implementing ISO 28219:2017).
ISO 28219:2017 does not supersede or replace any applicable safety or regulatory marking or labelling requirements. ISO 28219:2017 is meant to satisfy the minimum item marking requirements of numerous applications and industry groups and as such its applicability is to a wide range of industries, each of which may have specific implementation guidelines for it. ISO 28219:2017 is to be applied in addition to any other mandated labelling direct-marking requirements.
The labelling and direct marking requirement of ISO 28219:2017 and other standards can be combined into one label or marking area or appear as separate labels or marking areas.
ISO 28219:2017 uses the terms "part marking" and "item marking" interchangeably. Unless otherwise stated, ISO 28219:2017 will use the term "item marking" to describe both the labelling and direct part marking (DPM) of an item, where DPM includes, but is not limited to, altering (e.g. dot peen, laser etch, chemical etch), as well as additive type processes (e.g. ink jet, vacuum deposition).
The purpose of ISO 28219:2017 is to establish the machine-readable (linear, two-dimensional, and composite symbols) and human-readable content for direct marking and labelling of items, parts, and components.
ISO 28219:2017 provides a means for items, parts and components to be marked, and read in either fixtured or hand-held scanning environments at any manufacturer's facility and then read by customers purchasing items for subsequent manufacturing operations or for final end use. Intended applications include, but are not limited to, supply chain applications, e.g. inventory, distribution, manufacturing, quality control, acquisition, transportation, supply, repair, and disposal.
The figures are illustrative and not necessarily to scale or to the quality requirements specified in ISO 28219:2017.
|
Published |
2017-09 |
Edition : 2 |
Number of pages : 55 |
Technical Committee |
55.020
Packaging and distribution of goods in general
;
35.040.50
Automatic identification and data capture techniques
|
| ISO 28862:2018 |
Packaging — Child-resistant packaging — Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products |
This document specifies performance requirements and methods of test for non-reclosable packaging that has been designated child-resistant and which is intended to contain non-pharmaceutical products. This document is intended for type approval only (see 2.5) and is not intended for quality assurance purposes.
This document applies to non-reclosable packages of the single-use type consisting of one or more individual units.
Non-reclosable packages for pharmaceutical products are excluded from the scope of this document. These are the subject of a separate standard, ISO 14375, Child-resistant non-reclosable packaging for pharmaceutical products — Requirements and testing.
|
Published |
2018-07 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
55.020
Packaging and distribution of goods in general
|
| ISO/CD 31512 |
Cold chain logistics services in B to B sector — Requirements for low temperature storage services and low temperature transport services |
Low temperature storage services and low temperature transport services for food.
Cosmetics, cigarettes, pharmaceutical and medical products, over-the-counter drugs and commercially available medicine are excluded.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
55.020
Packaging and distribution of goods in general
;
03.100.10
Purchasing. Procurement. Logistics
|
| ISO/CD 7683 |
Design guidelines and test methods for removable shrink labels applied to plastic bottles |
This international standard specifies design guidelines and testing methods for packaging suppliers to help consumers easily separate shrink labels from plastic bottles and effectively recycle plastic bottles during waste collection.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
55.040
Packaging materials and accessories
|
| ISO 24259:2022 |
Steel strapping for packaging |
This document specifies the classification, dimensions, shape, technical requirements, inspection rules and testing methods as well as marking, ordering information and logistics of the steel strapping for packaging.
This document is applicable to steel strapping for packaging in the field of metallic material, glass, light industrial products and logistics, etc.
|
Published |
2022-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
55.040
Packaging materials and accessories
|
| ISO 4578:1979 |
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method |
|
Withdrawn |
1979-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 4578:1990 |
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method |
|
Withdrawn |
1990-03 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 4578:1997 |
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
This International Standard specifies a floating-roller method for the determination of the peel resistance of high-strength adhesive bonds between a rigid adherend and a flexible adherend when tested under specified conditions of preparation and testing.
Note - There are indications that the floating roller may produce more constant numerical data than other peel methods. However, it should not be expected that the flexible adherend will conform to the surface of the roller.
|
Published |
1997-07 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 4587:1979 |
Adhesives — Determination of tensile lap-shear strength of high strength adhesive bonds |
|
Withdrawn |
1979-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 4587:1995 |
Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
Specifies a method for determining the tensile lap-shear strength of rigid-to-rigid bonded assemblies when tested using a standard specimen and under specified conditions. Cancels and replaces the first edition.
|
Withdrawn |
1995-08 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 4587:2003 |
Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
ISO 4587:2003 specifies a method for determining the tensile lap-shear strength of rigid-to-rigid bonded assemblies using a standard specimen under specified conditions of preparation and testing. This test procedure does not provide design information.
|
Published |
2003-03 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 4588:1989 |
Adhesives — Preparation of metal surfaces for adhesive bonding |
|
Withdrawn |
1989-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 4588:1995 |
Adhesives — Guidelines for the surface preparation of metals |
Describes the usual procedures for the laboratory preparation of metal surfaces for adhesive bonding and testing of the bond. Prebonding surface treatments are given for aluminium and aluminium alloys, chromium, copper and nickel and their alloys, magnesium and magnesium alloys, mild and stainless steel, tin, zinc and zinc alloys.
|
Withdrawn |
1995-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 5684:2023 |
Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products |
This document specifies a reference method for the determination of volatile organic compound (VOC) emissions into indoor air from floor covering adhesives and products used for flooring installation. This method is applicable to determine volatile organic compounds, semi-volatile organic compounds, and volatile aldehydes. It is based on the use of a test chamber and subsequent analysis of an air sample for organic compounds by GC-MS respectively HPLC.
The main purpose of the test procedure is to obtain relevant performance data for the classification of flooring adhesives and products used for the installation of floor coverings with respect to low VOC emissions during the use phase of the flooring.
NOTE 1: This document describes the overall procedure and makes use of existing standards mainly by normative reference, complemented when necessary with additional or modified normative requirements.
NOTE 2: No conclusions about occupational health and safety can be drawn from the testing and/or the classification of products according to this standard.
|
Published |
2023-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 6076 |
Adhesives — Installation of floor coverings, wood flooring, levelling compounds and tiles — Specification of trowel notch sizes |
|
Under development |
2023-04 |
Edition : 1 |
|
Technical Committee |
83.180
Adhesives
|
| ISO 6237:1987 |
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading |
The method is intended for testing adhesives used in bonding wood to wood. Standard specimens are prepared from timber plies. The test specimens shall be of a two-ply or three-ply construction with notches as shown in a picture. The shear area is 20 mm x 25 mm. The adhesive shall be applied in accordance with the procedure recommended by the manufacturer of the adhesive. The mean tensile shear strength and the standard deviation of test results shall be reported.
|
Withdrawn |
1987-03 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 6237:2003 |
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading |
ISO 6237:2003 specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in tension and under specified conditions of preparation, conditioning and testing. This method is intended for testing only those adhesives used in bonding wood to wood in either parallel-laminated or cross-laminated construction. It is not intended for use in testing manufactured products.
|
Withdrawn |
2003-10 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.180
Adhesives
|
| ISO 6237:2017 |
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading |
ISO 6237:2017 specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in tension and under specified conditions of preparation, conditioning and testing. This method is intended for testing only those adhesives used in bonding wood to wood in either parallel-laminated or cross-laminated construction.
This method is not intended for use in testing manufactured products.
|
Published |
2017-11 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 6238:1987 |
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compression loading |
|
Withdrawn |
1987-03 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 6238:2001 |
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading |
|
Withdrawn |
2001-02 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.180
Adhesives
|
| ISO 6238:2018 |
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading |
This document specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in compression and under specified conditions of preparation, conditioning and testing. This method is intended for testing only those adhesives used in bonding wood to wood.
This method is not intended for use in testing manufactured products.
|
Published |
2018-08 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 6354:1982 |
Adhesives — Vocabulary |
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
;
01.040.83
Rubber and plastics industries (Vocabularies)
|
| ISO 6922:1987 |
Adhesives — Determination of tensile strength of butt joints |
Specifies a method for determining the bond strength of a butt joint when subjected to tensile force. The method is applicable to all types of adhesives. -A joint formed from two bar or rod adherends bonded by faces normal to their length is stressed to rupture by a tensile force. The test result is expressed as the arithmetic mean of the breaking force of five valid tests.
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 7387-1:1983 |
Adhesives with solvents for assembly of PVC-U pipe elements — Characterization — Part 1: Basic test methods |
Specification of three basic test methods, which are essential in deciding the uniformity of an adhesive: Viscosity (dynamic and Brookfield viscosity), conventional dry matter content and ash content.
|
Published |
1983-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO/FDIS 7972 |
Adhesives — Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding |
This standard specifies a method for the rapid infusion of water to an adhesive layer using a specimen with one side open, the secondary bonding the specimens with the adhesive layer that is still moistened, and a shear strength test of the secondary bonded specimen. This test procedure does not provide design information.
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 8510-1:1990 |
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 1: 90 degree peel |
Particularly suitable for use with less flexible adherends for which a 180 ° peel test is not suitable because the adherends crack, break or delaminate. A bonded assembly of two adherends is prepared using the adhesive under test. The adherends are then pulled apart at a steady rate, starting at the open end of the bond, in such a way that separation occurs progressively along the length of the bonded adherends. The force is applied approximately normal to the plane of the bond, through the separated part of the flexible adherend. A figure shows a schematic diagram.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|
| ISO 8510-2:1990 |
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180 degree peel |
Suitable for use with less flexible adherends. The principle consists in preparing a bonded assembly of two adherends, using the adhesive under test. The adherends are then pulled apart at a steady rate, starting at the open end of the bond, in such a way that separation occurs progressively along the length of the bonded adherends. The force is applied substantially parallel to the plane of the bond, through the separated part of the flexible adherend. A figure shows a schematic diagram.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|
| ISO 8510-2:2006 |
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180° peel |
ISO 8510-2:2006 specifies a 180° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends where one adherend is flexible and the other is rigid.
|
Published |
2006-12 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 9142:1990 |
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
Describes conditions under which adhesive joints may be exposed to various climatic or chemical influences for the purpose of assessing the effects of such influences on certain properties. They are not necessarily applicable to the determination of the service life of a bonded assembly. The principle consists in defining the ageing conditions that relate most closely to the application for the adhesive by reference to the preferred conditions set out in annex A to annex F. These conditions are single-variable, multi-variable, cyclic, change of heat, cold (thermal shock), humidity, dryness, immersion in water or salt solutions, exposure to chemical attack and combinations of these.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
83.180
Adhesives
|
| ISO 9142:1990/Cor 1:1995 |
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints — Technical Corrigendum 1 |
Corrects the content of some subclauses.
|
Withdrawn |
1995-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.180
Adhesives
|
| ISO 9142:2003 |
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
ISO 9142:2003 describes laboratory ageing conditions under which adhesive joints may be exposed to various environmental influences -- climatic or chemical -- for the purpose of assessing the effects of such influences on certain properties.
The ageing conditions are applicable to bonded assemblies and may be used to constitute a set of tests for the evaluation of an adhesive.
The results obtained using the procedures described in this International Standard are not necessarily applicable to the determination of the service life of a bonded assembly because there is no direct relation between the test results and the behaviour of a bonded assembly over a period of time under service conditions. However, for certain specific applications, experience with the procedures may enable a correlation to be established.
|
Published |
2003-12 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
83.180
Adhesives
|
| ISO 9311-1:2005 |
Adhesives for thermoplastic piping systems — Part 1: Determination of film properties |
ISO 9311-1:2005 specifies three test procedures suitable for the determination of the spreadability and film properties of solvent-containing adhesives for thermoplastic piping systems. These methods do not produce directly comparable results. One method is applicable to non-thixotropic adhesives and the other two methods are applicable to thixotropic adhesives.
|
Published |
2005-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
;
23.040.01
Pipeline components and pipelines in general
|
| ISO 9311-2:2002 |
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength |
|
Withdrawn |
2002-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
;
23.040.01
Pipeline components and pipelines in general
|
| ISO 9311-2:2011 |
Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength |
ISO 9311-2:2011 specifies a method for the determination of the shear strength of joints made with adhesives for thermoplastic piping systems.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
;
23.040.01
Pipeline components and pipelines in general
|
| ISO 9311-3:2005 |
Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure |
ISO 9311-3:2005 specifies a method for the assessment of the internal pressure resistance of assemblies made with adhesives for thermoplastic piping systems.
|
Published |
2005-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
;
23.040.01
Pipeline components and pipelines in general
|
| ISO 9653:1991 |
Adhesives — Test method for shear impact strength of adhesive bonds |
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|
| ISO 9653:1998 |
Adhesives — Test method for shear impact strength of adhesive bonds |
|
Published |
1998-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 9664:1993 |
Adhesives — Test methods for fatigue properties of structural adhesives in tensile shear |
The principle of the method specified is cyclically stressing the specimen in a way that may be regarded as the superposition of an alternating stress on a static stress which is the mean stress. The number of cycles at failure of the specimen for a given mean stress and stress amplitude is determined. These values are used to establish SN curves which then permit the estimation of the confidence zone concerning the fatigue resistance of a joint. The fatigue properties are a function of the specimen geometry. The results do not correspond to intrinsic properties of the adhesive and cannot be used for design purposes.
|
Published |
1993-05 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 9665:1993 |
Adhesives — Animal glues — Methods for sampling and testing |
|
Withdrawn |
1993-03 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
83.180
Adhesives
|
| ISO 9665:1998 |
Adhesives — Animal glues — Methods of sampling and testing |
|
Published |
1998-09 |
Edition : 2 |
Number of pages : 23 |
Technical Committee |
83.180
Adhesives
|
| ISO 10123:1990 |
Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens |
Also applicable to liquid adhesives used for locking and sealing threaded fasteners and to other adhesives. The test is for ranking and quality control of adhesives; the result does not reflect the performance of the materials in service. Determination of the force required to shear the adhesive joint formed between a metal pin and a metal collar. The static shear strength is calculated from this force.
|
Withdrawn |
1990-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 10123:2013 |
Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens |
ISO 10123:2013 specifies a method for the determination of the shear strength of anaerobic-curing liquid adhesives used for retaining cylindrical assemblies, pin-and-collar type, or for locking and sealing threaded fasteners. This test method can also be used for other adhesives.
|
Published |
2013-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 10354:1992 |
Adhesives — Characterization of durability of structural-adhesive-bonded assemblies — Wedge rupture test |
Simulates in a qualitative manner the forces and effects on an adhesive-bonded joint at a metal-adhesive/primer interface. It can also be used as a method of checking the surface preparation of substrates. The test is applicable at the present time to the bonding of aluminium and titanium alloys, but may be used for other metals and plastics, provided consideration is given to the thickness and rigidity of the adherends.
|
Published |
1992-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 10363:1992 |
Hot-melt adhesives — Determination of thermal stability |
The method is based on placing a stainless steel or glass vessel in an oil bath or oven, adding a sufficient quantity of the adhesive to the vessel, melting the sample, measuring the viscosity at the operating temperature and the softening point, repeating these operations at regular time intervals of between 4 h and 6 h, until the time for stopping the test according to pre-determined criteria is reached, and observing and recording, at the time that each measurement is taken, the following phenomena: skin formation, fumes, phase separation, gelation, change in colour.
|
Published |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 10364:1993 |
Adhesives — Determination of working life (pot life) of multi-component adhesives |
Is intended to determine whether the working life conforms to the minimum specified working life required of an adhesive by viscosity tests or by bond strength tests or by both. The working life is determined by measuring the viscosity and/or bond strength at specified intervals. The time at which the bond strength drops to a specified level and/or a specified change in viscosity is obtained is considered the working life of the adhesive.
|
Withdrawn |
1993-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 10364:2007 |
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives |
ISO 10364:2007 specifies methods for determining the pot life of multi-component adhesives in order to be able to determine whether the pot life conforms to the minimum specified working life required of an adhesive.
The test methods described are suitable for assessing all multi-component adhesives, and especially epoxy-based and polyurethane-based adhesives, but they are not suitable for some acrylic-based adhesives.
The methods can also be used for assessing non-structural adhesives.
|
Withdrawn |
2007-09 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 13007-1:2004 |
Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives |
ISO 13007-1:2004 applies to ceramic tile adhesives for internal and external tile installations on walls and floors.
ISO 13007-1:2004 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives.
ISO 13007-1:2004 specifies the values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives].
ISO 13007-1:2004 does not contain criteria or recommendations for the design and installation of ceramic tiles.
|
Withdrawn |
2004-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO 10364:2015 |
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives |
ISO 10364:2015 specifies methods for determining the pot life of multi-part adhesives in order to be able to determine whether the pot life conforms to the minimum specified working life required of an adhesive.
For the purposes of simplification, the term "pot life" is deemed to have the same meaning as "working life" and will be used to represent both throughout this International Standard. Methods described to measure the property provide different answers. So the results shall be specified with respect to the method used.
The test methods described are suitable for assessing all multi?part adhesives, and especially epoxy based and polyurethane based adhesives, but they are not suitable for some acrylic-based adhesives.
NOTE 1 Some of the methods described in this International Standard can also be suitable for determination of working life of one-part adhesives that react to humidity (e.g. PUR prepolymers).
NOTE 2 This International Standard can also be used for assessing non-structural adhesives.
|
Published |
2015-09 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO/DIS 10364 |
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives |
|
Under development |
|
Edition : 4 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 10365:1992 |
Adhesives — Designation of main failure patterns |
Specifies the designations and illustrates, through diagrams, their respective appearances. It applies to all mechanical tests performed on a bonded assembly, regardless of the nature of the adherends and adhesive which make up the assembly.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 10365:2022 |
Adhesives — Designation of main failure patterns |
This document specifies the designations for the main types of failure pattern of bonded assemblies and illustrates, through diagrams, their respective appearances.
This document applies to all mechanical tests performed on a bonded assembly, regardless of the nature of the adherends and adhesive which make up the assembly.
|
Published |
2022-01 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 10964:1993 |
Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners |
The test method described is used to make comparative assessments of the securing or locking effect of anaerobic adhesives. It may be used for other types of adhesives. Its principle is determining the torque required to unscrew a bonded nut and bolt assembly, including the initial torque required to break the bond, and the torque measured after turning the nut 180°.
|
Published |
1993-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 11003-1:1993 |
Adhesives — Determination of shear behaviour of structural bonds — Part 1: Torsion test method using butt-bonded hollow cylinders |
The principle of the method specified is determining the deformation of the adhesive in the annular bond between two butt-jointed hollow cylinders as a function of the applied torque up to failure of the joint. The circular symmetry of the specimen entails a state of simple shear with uniform strain in the bond line. Shear stress values versus shear strain of the adhesive (including shear modulus) are useful for advanced design work, e.g. in finite element analysis methods.
|
Withdrawn |
1993-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 11003-1:2001 |
Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders |
|
Withdrawn |
2001-12 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.180
Adhesives
|
| ISO 11003-1:2019 |
Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders |
This document specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, such as in finite element analysis methods.
|
Published |
2019-04 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
83.180
Adhesives
|
| ISO 11003-2:1993 |
Adhesives — Determination of shear behaviour of structural bonds — Part 2: Thick-adherend tensile-test method |
The test is performed on specimens consisting of thick, rigid adherends, with a short length of overlap, in order to obtain the most uniform distribution of shear stresses possible and to minimize undesired stresses. The method may be used to determine the shear properties of an adhesive (stress and strain), the shear modulus of the adhesive, all other adhesive properties that can be derived from the stress/strain curve (secant moduli, shear stress at a given strain limit, etc.), the effect of temperature, environment, testing speed, etc. on these shear properties.
|
Withdrawn |
1993-09 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
83.180
Adhesives
|
| ISO 11003-2:2001 |
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends |
|
Withdrawn |
2001-12 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
83.180
Adhesives
|
| ISO 4332:1977 |
Photography — Processed photographic film for archival records — Silver-gelatin type on poly(ethylene terephthalate) base — Specifications |
|
Withdrawn |
1977-01 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 11003-2:2019 |
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends |
This document specifies a test method for determining the shear behaviour of an adhesive in a single lap joint bonded assembly when subjected to a tensile force.
The test is performed on specimens consisting of thick, rigid adherends, with a short length of overlap, in order to obtain the most uniform distribution of shear stresses possible and to minimize other stress states which initiate failure.
This test method may be used to determine:
— the shear-stress against shear-strain curve to failure of the adhesive;
— the shear modulus of the adhesive;
— other adhesive properties that can be derived from the stress/strain curve such as secant shear modulus and maximum shear stress;
— the effect of temperature, environment, test speed, etc., on these properties.
This document does not apply in case of adhesion failure.
|
Published |
2019-06 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
83.180
Adhesives
|
| ISO 11339:1993 |
Adhesives — 180 degree peel test for flexible-to-flexible bonded assemblies (T-peel test) |
Specifies a test for the determination of the peel strength of an adhesive by measuring the peeling force of a T-shaped bonded assembly of two flexible adherends. The angle between the bond line und the direction of the applied force is not fixed. Adherends are separated at an approximately steady rate from an open edge of a prepared bond, so that separation occurs progressively along the bond line. The method was originally developed for use with metal adherends, but other flexible adherends may also be used.
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 11339:2003 |
Adhesives — T-peel test for flexible-to-flexible bonded assemblies |
ISO 11339:2003 specifies a T-peel test for the determination of the peel strength of an adhesive by measuring the peeling force of a T-shaped bonded assembly of two flexible adherends. This test procedure does not provide design information.
NOTE This method was originally developed for use with metal adherends, but other flexible adherends may also be used.
|
Withdrawn |
2003-03 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|
| ISO 11339:2010 |
Adhesives — T-peel test for flexible-to-flexible bonded assemblies |
ISO 11339:2010 specifies a T‑peel test for the determination of the peel strength of an adhesive by measuring the peeling force of a T‑shaped bonded assembly of two flexible adherends. This test procedure does not provide design information.
This method was originally developed for use with metal adherends, but other, flexible, adherends may also be used.
|
Withdrawn |
2010-02 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 11339:2022 |
Adhesives — T-peel test for flexible-to-flexible bonded assemblies |
This document specifies a T‑peel test for the determination of the peel resistance of an adhesive by measuring the peeling force of a T‑shaped bonded assembly of two flexible adherends. This test procedure does not provide design information.
NOTE This method was originally developed for use with metal adherends but other, flexible, adherends can also be used.
|
Published |
2022-02 |
Edition : 4 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 11343:1993 |
Adhesives — Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions — Wedge impact method |
The method consists of the determination of the average cleavage resistance, expressed as force or energy, of the adhesive bond between two metallic adherends. The cleavage corresponds to the separation of the adherends by a wedge, moving at high speed, whose displacement is initiated by an impact. The method allows a choice of sheet metal substrate corresponding to those materials frequently used in industry, e.g. for automotive applications.
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 11343:2003 |
Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions — Wedge impact method |
ISO 11343:2003 specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading of high-strength adhesive bonds between two metallic adherends, when tested under specified conditions of preparation and testing. This test procedure does not provide design information.
The method allows a choice of sheet metal substrate corresponding to those materials frequently used in industry, e.g. for automotive applications.
|
Withdrawn |
2003-04 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 11343:2019 |
Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions — Wedge impact method |
This document specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading of high-strength adhesive bonds between two adherends, when tested under specified conditions of preparation and testing. This test procedure does not provide design information.
The method allows a choice of sheet metal or fibre reinforced plastic substrates corresponding to those materials frequently used in industry, such as for automotive applications.
|
Published |
2019-06 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
83.180
Adhesives
|
| ISO 13007-1:2004/Cor 1:2006 |
Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives — Technical Corrigendum 1 |
|
Withdrawn |
2006-01 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO 13007-1:2010 |
Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives |
ISO 13007-1:2010 defines terms concerning the products, working methods and application properties for ceramic tile adhesives. It specifies values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives].
ISO 13007-1:2010 is applicable to ceramic tile adhesives for internal and external tile installations on walls and floors.
|
Withdrawn |
2010-09 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO 13007-1:2014 |
Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives |
ISO 13007-1:2014 applies to ceramic tile adhesives for internal and external tile installations on walls and floors.
ISO 13007-1:2014 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives
ISO 13007-1:2014 specifies the values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives].
|
Published |
2014-05 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO 13007-2:2005 |
Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives |
ISO 13007-2:2005 specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described: determination of open time; determination of slip; determination of shear adhesion strength; determination of tensile adhesion strength; determination of transverse deformation; and determination of chemical resistance.
|
Withdrawn |
2005-09 |
Edition : 1 |
Number of pages : 39 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO 13007-2:2005/Cor 1:2007 |
Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives — Technical Corrigendum 1 |
|
Withdrawn |
2007-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO 13007-2:2010 |
Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives |
ISO 13007-2:2010 describes methods for determining characteristics for adhesives used in the installation of ceramic tiles. The test methods described are determination of open time, determination of slip, determination of shear adhesion strength, determination of tensile adhesion strength, determination of transverse deformation and determination of chemical resistance.
|
Withdrawn |
2010-09 |
Edition : 2 |
Number of pages : 35 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO 13007-2:2013 |
Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives |
ISO 13007:2013 describes the methods for determining the characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described: determination of open time; determination of slip; determination of shear adhesion strength; determination of tensile adhesion strength; determination of transverse deformation.
|
Published |
2013-11 |
Edition : 3 |
Number of pages : 26 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO 13445:1995 |
Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method |
Describes a method for the determination of the shear strength of adhesive bonds between materials with elastic moduli higher than the elastic modulus of the adhesive. Allows an estimation of the shear strength of an adhesive on machinable and non-machinable materials.
|
Withdrawn |
1995-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 13445:2003 |
Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method |
ISO 13445:2003 specifies a method for the determination of the shear strength of adhesives used to bond materials with elastic moduli higher than the elastic modulus of the adhesive. The method provides an estimate of the shear strength of an adhesive on various machinable and non-machinable substrate materials.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|
| ISO 13895:1996 |
Adhesives — Guidelines for the surface preparation of plastics |
Describes mechanical, chemical and electrical methods of surface preparation for plastics adherends to be used prior to adhesive bonding.
|
Withdrawn |
1996-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.180
Adhesives
|
| ISO 14448:2016 |
Low modulus adhesives for exterior tile finishing |
ISO 14448:2016 specifies a quality standard and test methods for a low modulus adhesive composed of chemical reaction resins and used for the installation of tiles to exterior walls.
|
Published |
2016-10 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
83.180
Adhesives
;
91.100.23
Ceramic tiles
|
| ISO/R 72:1958 |
Withdrawal of ISO/R 72-1958 |
|
Withdrawn |
1958-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
37.060.20
Motion picture films. Cartridges
|
| ISO 14615:1997 |
Adhesives — Durability of structural adhesive joints — Exposure to humidity and temperature under load |
This standard specifies the requirements and test methods for solid flat extruded sheets of impact-modified polystyrene (PS-I1) without fillers and reinforcing materials. This standard applies only to thickness 0,25 mm to 20,0 mm in accordance with clause 3. This standard also applies to PS-I sheet in roll form.
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 14676:1997 |
Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method |
This International Standard is applicable to the evaluation of the quality of a surface treatment of aluminium or its alloys for high-strength adhesive bonding.
|
Published |
1997-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 14678:2005 |
Adhesives — Determination of resistance to flow (sagging) |
ISO 14678:2005 describes seven methods for the assessment of the flow characteristics of adhesives after application at room temperature and during cure, by the measurement of sagging. These methods may be used both for specifying an adhesive and for quality control purposes.
|
Published |
2005-08 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
83.180
Adhesives
|
| ISO 14679:1997 |
Adhesives — Measurement of adhesion characteristics by a three-point bending method |
This International Standard specifies a test method to determine the ability of a cured adhesive (if necessary with a primer) to adhere to a substrate with a certain surface finish, or which has been subjected to a specific surface preparation, using the "three-point bending method".
This standard is only applicable to quality assurance and only to substrates which are rigid or resistant enough to bending, such as steel or aluminium alloys. For other substrates, the thickness is adjusted to the modulus of elasticity or a suitable stiffener is used.
The adhesive is allowed to cure without the application of pressure in order to obtain the thickness needed to provide sufficient rigidity, otherwise a bonded reinforcing piece of the same material and the same thickness as the substrate is substituted for the block of adhesive.
This test method is not suitable for film adhesives.
|
Published |
1997-09 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
83.180
Adhesives
|
| ISO 15107:1998 |
Adhesives — Determination of cleavage strength of bonded joints |
This International Standard describes a method for the determination of the cleavage strength of adhesive joints. The method can only be used for comparing adhesives, and the results cannot be used for design purposes.
|
Published |
1998-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|
| ISO 15108:1998 |
Adhesives — Determination of strength of bonded joints using a bending-shear method |
This International Standard describes a procedure for the determination of the strength of adhesive joints, using a bending-shear method. The method can only be used for comparing adhesives, and the results cannot be used for design purposes.
|
Published |
1998-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 15109:1998 |
Adhesives — Determination of the time to rupture of bonded joints under static load |
This International Standard describes a procedure for the determination of the time to failure of a bonded joint, using a specimen which is statically loaded under specified conditions. This method can only be used for comparing adhesives, and the results cannot be used for design purposes
|
Published |
1998-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 15166-1:1998 |
Adhesives — Methods of preparing bulk specimens — Part 1: Two-part systems |
This part of ISO 15166 describes methods for the preparation of bulk specimens of adhesives. The procedures described are suitable for two-part adhesives such as epoxies, polyurethanes, acrylics, etc. The methods are not suitable for the preparation of bulk specimens of adhesives which require the evaporation of solvents or the liberation of gas for curing. They are also not suitable for pseudo-one-part adhesives that require an initiator to be applied to one of the surfaces to be bonded. In addition, the methods are not suitable for adhesives whose working life is very short, so that there is insufficient time to mix the components, dispense the adhesive and close the mould.
|
Published |
1998-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|
| ISO 15166-2:2000 |
Adhesives — Methods of preparing bulk specimens — Part 2: Elevated-temperature-curing one-part systems |
This part of ISO 15166 describes methods for the preparation of bulk specimens of adhesives.
The procedures described are suitable for elevated-temperature, one-part adhesives such as epoxies. They are not
suitable for adhesives where the cure requires the evaporation of solvents or liberation of gas.
|
Published |
2000-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.180
Adhesives
|
| ISO 15509:2001 |
Adhesives — Determination of the bond strength of engineering-plastic joints |
|
Withdrawn |
2001-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 4332:1986 |
Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on poly(ethylene terephthalate) base — Specifications |
|
Withdrawn |
1986-10 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
37.040.20
Photographic paper, films and plates. Cartridges
|
| ISO 15509:2019 |
Adhesives — Determination of the bond strength of engineering-plastic joints |
This document describes a test method for measuring the shear and/or tensile strength of an adhesively bonded plastic/plastic specimen of a specific design. This method allows the determination of a combined shear and tensile behaviour of the bond. These shear and tensile values are useful for design purposes.
|
Published |
2019-05 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 15605:2000 |
Adhesives — Sampling |
This International Standard specifies methods for sampling adhesives and related products, in order to obtain uniform
samples of convenient size which are adequately representative of the product being sampled. The sample or
samples so obtained are suitable for examination and preparation prior to testing.
The methods are applicable to products which require the addition and mixing in of catalysts or hardeners prior to
their application, by sampling each component separately. The methods are not applicable, however, to sampling
from a stream of adhesive (in this case the samples can be prepared in accordance with ISO 8213).
This International Standard does not apply to animal glues.
|
Published |
2000-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.180
Adhesives
|
| ISO 15908:2002 |
Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives |
|
Published |
2002-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.180
Adhesives
|
| ISO 16525-1:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods |
ISO 16525-1:2014 specifies general test methods for isotropic electrically conductive adhesives used in wiring, die attach of semiconductors, and surface assembly of printed circuit boards.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.180
Adhesives
|
| ISO 16525-2:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 2: Determination of electrical characteristics for use in electronic assemblies |
ISO 16525-2:2014 specifies test methods for isotropic electrically conductive adhesives used in wiring, die attach, and surface assembly of printed circuit boards of electronic devices. The test methods focus on volume and interfacial contact resistivity.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
83.180
Adhesives
|
| ISO 16525-3:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 3: Determination of heat-transfer properties |
ISO 16525-3:2014 specifies test methods for heat-transfer properties such as effective thermal conductivity and thermal resistance by a steady-state comparative longitudinal heat-flow method (SCHF method) using cartridge-type specimen for isotropic electrically conductive adhesives used in wiring, die attach, and surface assembly.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
83.180
Adhesives
|
| ISO 16525-4:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies |
ISO 16525-4:2014 specifies test methods using miniature specimens to determine shear strength and electrical resistance of a bonded joint that consists of electrically isotropic conductive adhesives and rigid adherends in specified conditions.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
83.180
Adhesives
|
| ISO 16525-5:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 5: Determination of shear fatigue |
ISO 16525-5:2014 specifies test methods using miniature specimens to measure shear fatigue of a glued joint that consists of isotropic electrically conductive adhesives and rigid adherends in specified conditions.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
83.180
Adhesives
|
| ISO 16525-6:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 6: Determination of pendulum-type shear impact |
ISO 16525-6:2014 specifies the pendulum-type test methods for impact strength of isotropic electrically conductive adhesives used in mounting components products on substrates.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
83.180
Adhesives
|
| ISO 16525-7:2014 |
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 7: Environmental test methods |
ISO 16525-7:2014 specifies the environmental test methods (cold, dry heat, damp heat and change of temperature) for isotropic electrically conductive adhesives used in the surface assembly of printed circuit boards of electronic devices.
|
Published |
2014-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.180
Adhesives
|