| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 6842:1983 |
Surface active agents — Polyethoxylated alcohol and alkylphenol sulfates — Determination of total active matter content |
|
Withdrawn |
1983-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 6842:1989 |
Surface active agents — Sulfated ethoxylated alcohols and alkylphenols — Determination of total active matter content |
A test portion is boiled under reflux with ethanol in the presence of sodium sulphate. The solution is filtrated, the filtrate evaporated, and the residue weighed. Any sodium chloride present is determined by dissolution of the residue in aqueous acetone and titration with a standard volumetric silver nitrate solution. The mass of the residue is corrected for the sodium chloride content.
|
Published |
1989-10 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 6843:1988 |
Surface active agents — Sulfated ethoxylated alcohols and alkylphenols — Estimation of the mean relative molecular mass |
By successive extraction, separation, evaporation, redissolution, and filtration through an ion-exchange resin the contents of sodium chloride, anionic-active matter, polyglycol, and polyglycol sulfate are determined. From the content of anionic surface active agent (alkylether sulfate) and the anionic surface active matter content determined by two-phase titration, the mean relative molecular mass is estimated.
|
Published |
1988-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 6844:1983 |
Surface active agents — Determination of mineral sulfate content — Titrimetric method |
A buffered acetonic solution of a test portion is titrated with a standard volumetric lead(II) nitrate solution in the presence of dithizone as indicator. The method is applicable to anionic surface active agents, containing sodium, ammonium and alkanolamine sulphates. It is not applicable to products containing other compounds such as phosphates or large amounts of chloride nor is it applicable in the presence of large amounts of salts of weak acids (for example, soaps or monoesters of sulphosuccinic acid).
|
Published |
1983-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 10131-1:1997 |
Foldaway beds — Safety requirements and tests — Part 1: Safety requirements |
|
Published |
1997-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.140
Furniture
|
| ISO 6845:1989 |
Surface active agents — Technical alkane sulfonates — Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content |
A test portion is dissolved in ethanol and the solution is acidified. The alkane monosulfonic acids are separated from the alkane disulfonates and sulfate ions by extraction with light petroleum. The light petroleum phase is evaporated and the residue is solved in ethanol. Traces of alkali are removed by means of a cation-exchange column. The eluate is neutralized with carbonate-free sodium hydroxide solution. The sodium alkane monosulfonates so formed are dried and weighed. The mean relative molecular mass of the alkanemonosulfonates and the alkanemonosulfonate content are calculated.
|
Published |
1989-07 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 6889:1982 |
Surface active agents — Determination of interfacial tension by drawing up liquid films |
|
Withdrawn |
1982-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 6889:1986 |
Surface active agents — Determination of interfacial tension by drawing up liquid films |
The determination is carried out in the following way: Measurement of the maximum force which can be exerted before the film breaks, the force being exerted vertically on a stirrup or ring, in contact with he interfacial liquid film between two immiscible liquid phases placed in a measuring cup, in order to draw up the interfacial film. The force must pass through a maximum, otherwise the measurement is not valid.
|
Published |
1986-03 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 7535:1984 |
Surface active agents — Detergents for domestic machine dishwashing — Guide for comparative testing of performance |
Covers the following principal considerations for assessing products for machine dishwashing: a) the performance characteristics; b) the soiled articles required for assessing these characteristics; c) the washing processes. In dealing with the load of soiled articles and washing process, a number of primary and secondary variables is listed.
|
Published |
1984-05 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 8022:1984 |
Surface active agents — Determination of wetting power by immersion |
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 8022:1990 |
Surface active agents — Determination of wetting power by immersion |
A cotton disc of known nature and characteristics, held in a grip, is immersed in a solution of surface active agent of known concentration. After displacement of air an penetration of the solution into the cloth, the cotton disc starts to sink. The wetting time is determined by measurement the interval between the moment of immersion of the cotton disc and the moment when it begins to sink. The wetting time is determined of two standard solutions and for each of five different concentrations and then of the surface active agent solution under test for five different concentrations. The three curves "wetting time / concentration" are plotted and compared.
|
Published |
1990-07 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 8212:1986 |
Soaps and detergents — Techniques of sampling during manufacture |
A certain number of increments is taken from the batch to be sampled. The increments are mixed to form a representative sample (bulk sample). From the representative sample a final sample is prepared by means of replicate reductions.
|
Published |
1986-06 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 8214:1985 |
Surface active agents — Washing powders — Determination of inorganic sulfates — Gravimetric method |
From a test portion all ethanol-soluble matter is removed by extraction with ethanol. In the presence of silicates the solution of the residue is treated with hydrochloric acid and evaporated to dryness. The residue is dissolved in water and the operations are repeated twice. The last solution is filtered and in the filtrate or in the silicatefree solution of the first step the sulfates are precipitated with barium chloride. The precipitate is filtered, washed, heated at 900 degree Celsius and weighed.
|
Published |
1985-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 8215:1985 |
Surface active agents — Washing powders — Determination of total silica content — Gravimetric method |
From a test portion all ethanol-soluble matter is removed by extraction with ethanol. The solution of the ethanol-insoluble residue is treated with hydrochloric acid and evaporated to dryness. The residue is dissolved in water and the operations are repeated twice. From the solution obtained after this operations the precipitate is filtered, washed, heated to 900 °C and weighed.
|
Published |
1985-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 8799:1988 |
Surface active agents — Sulfated ethoxylated alcohols and alkylphenols — Determination of content of unsulfated matter |
From a methanolic solution of the test portion, the unsulfated matter is separated on an ion-exchange column (filled with a mixture of cation-exchange resins and anion-exchange resins). The unsulfated matter is recovered from the eluate by evaporation and weighing of the residue.
|
Withdrawn |
1988-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 16560:2015 |
Surface active agents — Determination of polyethylene glycol content in nonionic ethoxylated surfactants — HPLC method |
ISO 16560:2015 specifies a method for the determination of the polyethylene glycol (PEG) content in aromatic and aliphatic non-ionic surface active agents of the type R-(O-C2H4) n OH; where n is the mean ethylene oxide (EO) value. It is applicable to all ethoxylated products soluble in methanol or methanol/water mixture. This method applies to PEG concentrations as mass fraction greater than or equal to 0,1 %. This International Standard is not applicable to PEG whose molar mass is lower than 400 g/mol. Monomeric ethylene glycol, diethylene glycol, triethylene glycol, and glycerol are not detected.
|
Published |
2015-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 17280:2015 |
Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography |
ISO 17280:2015 provides a method for the determination of 1,4-dioxane residues in surfactants which are synthesized from epoxyethane, such as alkyl ether sulfates and alcohol ethoxylates.
The method is applicable for samples containing 1,4-dioxane more than 5 mg/kg. For samples containing 1,4-dioxane more than 100 mg/kg, the sample solutions should be diluted to appropriate concentration.
|
Published |
2015-05 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 17293-1:2014 |
Surface active agents — Determination of chloroacetic acid (chloroacetate) in surfactants — Part 1: HPLC method |
ISO 17283-1:2014 specifies a method for the determination of monochloroacetic acid (monochloroacetate) and dichloroacetic acid (dichloroacetate) in surfactants by HPLC method.
The method applies for anionic surfactants such as alkyl (phenyl) ethoxylated carboxylate (AEC) or amphoteric surfactants such as alkyl imidazoline carboxylate, alkyl dimethyl betaine, and fatty acetyl propyl dimethyl betaine.
The limit of detection (LOD) is ≤0,3 µg/ml for monochloroacetic acid and ≤0,2 µg/ml for dichloroacetic acid; the limit of quantification (LOQ) is ≤1,0 µg/ml for monochloroacetic acid and ≤0,75 µg/ml for dichloroacetic acid (using a standard solution).
The LOD, at 5 g of sample weight, is ≤6 mg/kg for monochloroacetic acid and ≤4 mg/kg for dichloroacetic acid; and the LOQ is ≤20 mg/kg for monochloroacetic acid and ≤15 mg/kg for dichloroacetic acid.
|
Published |
2014-04 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 17293-2:2014 |
Surface active agents — Determination of chloroacetic acid (chloroacetate) in surfactants — Part 2: Ionic chromatographic method |
ISO 17293-2:2014 specifies a method for the determination of monochloroacetic acid (monochloroacetate) and dichloroacetic acid (dichloroacetate) in surfactants by ion chromatographic method.
The method applies for anionic surfactants such as alkyl (phenyl) ethoxylated carboxylate (AEC) or amphoteric surfactants such as alkyl imidazoline carboxylate, alkyl dimethyl betaine, and fatty acetyl propyl dimethyl betaine.
The limit of detection (LOD) is ≤0,01 µg/ml for monochloroacetic acid and ≤0,05 µg/ml for dichloroacetic acid; and the limit of quantification (LOQ) is ≤0,1 µg/ml for each standard (using a standard solution).
The LOD, at 1 g of sample weight, is ≤1 mg/kg for monochloroacetic acid and ≤5 mg/kg for dichloroacetic acid; and the LOQ is ≤10 mg/kg for each acid.
|
Published |
2014-04 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 19619:2018 |
Surface active agents — Determination of free propylene oxide content in propylene oxide adduct surfactants — GC method |
ISO 19619:2018 specifies an analytical procedure for the determination of free propylene oxide in surfactants which are synthesized from propylene oxide copolymers.
The method is appropriate for the qualitative and quantitative determination of propylene oxide groups in propylene oxide adducts, polyethers and polyglycol esters by headspace gas chromatography (HS-GC) with a flame ionization detector (FID) based on external procedure. Gas chromatography-mass spectrometry (GC-MS) is used for the confirmatory purposes.
|
Published |
2018-01 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 21264:2019 |
Surface active agents — Detergents — Determination of alkylphenol ethoxylates |
This document provides a method for the determination of alkylphenol ethoxylates (APEOs) in surfactants using high performance liquid chromatography (HPLC) and detected with diode array detector (DAD) or fluorescence detector (FLD).
This method is appropriate for the detection and quantification of APEOs in surfactants.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 21703:2019 |
Surface active agents — Microbiology — Microbiological test methods for liquid hand dishwashing |
This document provides microbiological test methods for enumeration and detection of aerobic mesophilic bacteria, detection of Escherichia coli and Pseudomonas aeruginosa in liquid hand dishwashing.
|
Published |
2019-01 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
07.100.99
Other standards related to microbiology
;
71.100.40
Surface active agents
|
| ISO 23324:2020 |
Surface active agents — Fabric conditioners — Determination of antistatic performance |
This document specifies a method for the determination of static electricity elimination (antistatic) performance.
This document is applicable to fabric conditioners and antistatic agents.
NOTE The differences between this document and some International Standards related to static electricity on textiles are listed in Annex B.
|
Published |
2020-11 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
71.100.40
Surface active agents
|
| ISO 858:1973 |
Fishing nets — Designation of netting yarns in the Tex System |
As a general rule, netting yarns designated by their linear density or their resultant linear density are usually grey yarns without any preparation. Specifies general usage and complete designation and, for particular cases, brief designation. Three examples for designation are covered. - Replaces ISO Recommendation R 858-1968.
|
Published |
1973-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1107:1974 |
Fishing nets — Netting — Basic terms and definitions |
Provides examples (with figure) for the determination of length of mesh side, length of mesh, opening of mesh, direction in knotted netting, direction in knotless netting, and size of netting. - Replaces ISO Recommendation R 1107-1969.
|
Withdrawn |
1974-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.150
Fishing and fish breeding
;
01.040.65
Agriculture (Vocabularies)
|
| ISO 1107:2003 |
Fishing nets — Netting — Basic terms and definitions |
ISO 1107:2003 gives the principal terms relating to netting for fishing nets, together with their definitions or, in some cases, the method of expressing dimensions.
|
Withdrawn |
2003-06 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
65.150
Fishing and fish breeding
;
01.040.65
Agriculture (Vocabularies)
|
| ISO 1107:2017 |
Fishing nets — Netting — Basic terms and definitions |
ISO 1107:2017 gives the principal terms relating to netting for fishing nets, together with their definitions or, in some cases, the method of expressing dimensions.
|
Published |
2017-08 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
65.150
Fishing and fish breeding
;
01.040.65
Agriculture (Vocabularies)
|
| ISO 1530:1973 |
Fishing nets — Description and designation of knotted netting |
Describes the principal characteristics of cited product and comprises the items of information to be furnished when ordering the netting. It is intended to facilitate the exchange of information between purchasers and suppliers of this product. - Replaces ISO Recommendation R 1530-1970.
|
Withdrawn |
1973-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1530:2003 |
Fishing nets — Description and designation of knotted netting |
ISO 1530:2003 specifies the principal characteristics of knotted netting for fishing nets, and specifies the items of information to be furnished when ordering the netting. It is intended to facilitate the exchange of information between purchasers and suppliers of knotted netting for fishing nets.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1531:1973 |
Fishing nets — Hanging of netting — Basic terms and definitions |
Describes and defines the principal terms "mounting", "hanging", "length of rope", "length of netting" and "hanging ratio E" and gives an example. - Replaces ISO Recommendation R 1531-1970.
|
Published |
1973-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
65.150
Fishing and fish breeding
;
01.040.65
Agriculture (Vocabularies)
|
| ISO 1532:1973 |
Fishing nets — Cutting knotted netting to shape ("tapering") |
Depending on the desired final shape of netting, tapering cuts must be made in suitable ways. The various cutting rates are obtained by combining different lengths of cuts. Examples of tapering are given in the annex. - Replaces ISO Recommendation R 1532-1970.
|
Published |
1973-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1805:1973 |
Fishing nets — Determination of breaking load and knot breaking load of netting yarns |
The tests may be carried out in both the dry and wet states but tests in wet state on the knotted yarn are considered to be particularly appropriate in indicating the behaviour of the yarn in use. A length of yarn is extended in the dry or wet state until it reaches the load at rupture. The test is performed using a suitable apparatus that records or indicates the applied load. - Replaces ISO Recommendation R 1805-1970.
|
Withdrawn |
1973-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1805:2006 |
Fishing nets — Determination of breaking force and knot breaking force of netting yarns |
ISO 1805:2006 specifies a method of testing the breaking force and knot breaking force of netting yarns for fishing nets.
Tests may be carried out in both the dry and wet states, but tests in the wet state on the knotted yarn are considered to be particularly appropriate in indicating the behaviour of the yarn in use.
|
Published |
2006-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1806:1973 |
Fishing nets — Determination of mesh breaking load of netting |
The tests may be carried out in both the dry and wet states but tests in wet state are considered to be particularly appropriate in indicating the behaviour of the netting in use. A mesh is extended in the dry or wet state until one of the knots or joints reaches the load at rupture. The test is performed using a suitable apparatus that records or indicates the applied load. - Replaces ISO Recommendation R 1806-1970.
|
Withdrawn |
1973-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 2075:1972 |
Cutting netting to shape — Determination of the cutting rate |
Depending on the desired final shape of netting, tapering cuts must be made in suitable ways. The various cutting rates are obtained by combining different lengths of cuts. Examples of tapering are included in an annex. The main cutting rates complemented by illustrations are described.
|
Withdrawn |
1972-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 3090:1974 |
Ropes and cordage — Netting yarns — Determination of change in length after immersion in water |
Immersion in water, at a given temperature, of a length of netting yarn on which two marks have been made at a prescribed distance apart. Measurement of the change in length between the two marks. Apparatus for determining the change in length is described by means of a figure.
|
Withdrawn |
1974-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.150
Fishing and fish breeding
;
59.080.50
Ropes
|
| ISO 3660:1976 |
Fishing nets — Mounting and joining of netting — Terms and illustrations |
The common methods of mounting and joining of netting for fishing are listed and brief descriptions of the methods together with corresponding diagrams are given. Each method is identified by a number.
|
Published |
1976-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
65.150
Fishing and fish breeding
;
01.040.65
Agriculture (Vocabularies)
|
| ISO 3790:1976 |
Fishing nets — Determination of elongation of netting yarns |
Tests may be carried out in both the dry and wet states but tests in the wet state are considered to be particularly appropriate in indicating the behaviour of the yarn in use. Any of the following types of tensile testing machines may be used: constant rate of elongations machine; constant rate of traverse machine. Preference should be given to constant rate of elongation machines.
|
Published |
1976-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 5020:2022 |
Waste reduction and treatment on fishing vessels |
This document specifies a system for waste reduction and treatment on fishing vessels. It includes principles, management plans, methods and requirements.
This document is applicable to both marine and inland fisheries.
|
Published |
2022-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 12878:2012 |
Environmental monitoring of the impacts from marine finfish farms on soft bottom |
This International Standard establishes an approach for sampling and empirical measurement of soft-bottom
impacts from marine finfish net pen farms, and gives examples of detailed procedures for how environmental
impacts from finfish net pen farm sites can be monitored in the field, including guidelines for quality assurance
of sampling protocols and safety. The emphasis of the environmental impact in this International Standard is
on eutrophication effects on the seabed.
This International Standard identifies ecological objectives, the indicators used, and the methodology and
design, and encompasses guidelines for quality assurance of sampling protocols and operational safety.
|
Published |
2012-07 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 16663-1:2003 |
Fishing nets — Method of test for the determination of mesh size — Part 1: Opening of mesh |
ISO 16663-1:2003 specifies a method for the determination of size of opening of the mesh of fishing nets using a flat wedge gauge. It is applicable to active fishing gears.
|
Withdrawn |
2003-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 16663-1:2009 |
Fishing nets — Method of test for the determination of mesh size — Part 1: Opening of mesh |
ISO 16663-1:2009 specifies a method for the determination of the size of the mesh opening of fishing nets, using an objective mesh gauge. It is applicable to active and passive fishing gear.
|
Published |
2009-03 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 16663-2:2003 |
Fishing nets — Method of test for the determination of mesh size — Part 2: Length of mesh |
ISO 16663-2:2003 specifies a method for the determination of mesh length of fishing nets using a ruler. It is applicable to passive fishing gears.
|
Published |
2003-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 16663-2:2003/Cor 1:2005 |
Fishing nets — Method of test for the determination of mesh size — Part 2: Length of mesh — Technical Corrigendum 1 |
|
Published |
2005-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 7170:1993 |
Furniture — Storage units — Determination of strength and durability |
Describes test methods for determining the strength and durability (mainly regarding fatigue and wear) of storage units that are fully assembled and ready for use, including their movable and non-movable parts. Assessment of ageing and degradation is not included. The tests consist of the application of loads, forces and velocities simulating normal functional use as well as misuse to be expected and are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. Does not specify requirements to be met.
|
Withdrawn |
1993-10 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.140
Furniture
|
| ISO 4211-2:1993 |
Furniture — Tests for surfaces — Part 2: Assessment of resistance to wet heat |
The principle of the method specified is to place a standard aluminium alloy block at a specified test temperature on a damp cloth in contact with the surface of the test panel (or on finished furniture), removing the block and damp cloth after a specified period of time, wiping the test area dry and leaving the test panel undisturbed for at least 16 h, then examining it under specified lighting conditions for signs of damage (discoloration, change in lustre, blistering or other defects). Applies to the hard surfaces of all finished furniture, regardless of material, except for finishes on leather and coated fabrics.
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.140
Furniture
|
| ISO 4211-2:2013 |
Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat |
ISO 4211-2:2013 specifies a method for the assessment of the resistance to wet heat of all rigid furniture surfaces regardless of materials.
It does not apply to leather and textile surfaces.
|
Published |
2013-05 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
97.140
Furniture
|
| ISO 4211-3:1993 |
Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat |
The principle of the method specified is to place a standard aluminium alloy block at a specified test temperature on the surface of the test panel (or on finished furniture), removing the block after a specified period of time, wiping the test area dry and leaving the test panel undisturbed for at least 16 h, then examining it under specified lighting conditions for signs of damage (discoloration, change in lustre, blistering or other defects). Applies to the hard surfaces of all finished furniture, regardless of material, except for finishes on leather and coated fabrics.
|
Withdrawn |
1993-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.140
Furniture
|
| ISO 4211-3:2013 |
Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat |
ISO 4211-3:2013 specifies a method for the assessment of the resistance to dry heat of all rigid furniture surfaces regardless of materials.
It does not apply to leather and textile surfaces.
|
Published |
2013-05 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
97.140
Furniture
|
| ISO 4211-4:1988 |
Furniture — Tests for surfaces — Part 4: Assessment of resistance to impact |
The specified method is suitable for use either as a means of comparing different finishing systems or as a quality control test to ensure that a specified performance level is achieved or maintained. The tests are carried out on panels of the same materials and finished in the identical manner as the finished furniture of a size sufficient to meet the requirements of the test. The degree of damage to the test area is assessed by reference to a descriptive numerical rating code.
|
Published |
1988-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.140
Furniture
|
| ISO 4211-5:2021 |
Furniture — Tests for surface finishes — Part 5: Assessment of resistance to abrasion |
This document specifies a method for the assessment of the abrasion resistance of surfaces with foils, laminates, melamine faced boards, pigmented and transparent lacquers.
The test is intended to be carried out on an unused part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
|
Published |
2021-10 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 4211:1979 |
Furniture — Assessment of surface resistance to cold liquids |
The specified method applies to surfaces of finished furniture or test panels of the same material and finished in the identical manner as the finished furniture with a size sufficient to meet the requirements of the test. The type and number of test liquids and the test periods can be selected from the tables in clause 5 and in the annex. The test results are assessed in terms of a descriptive numerical rating code.
|
Published |
1979-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.140
Furniture
|
| ISO 4769:2022 |
Hardware for furniture — Strength and durability of hinges and their components — Hinges pivoting on a vertical axis |
This document specifies test methods and test parameters for the strength and durability of all types of hinges pivoting on a vertical axis and their components for all fields of application.
With the exception of corrosion, ageing and the influence of heat and humidity are not included.
|
Published |
2022-11 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.140
Furniture
|
| ISO 5970:1979 |
Furniture — Chairs and tables for educational institutions — Functional sizes |
The specified dimensions are confined to those which derive from anthropometric data; compliance with them ensures that the furniture permits good seating postures. The seven sizes for seating and related tables based on a reference stature are given in tables 1 and 2, and the references to the dimensions are shown in figures 1 and 2. This standard does not include special requirements applicable to "special schools" and adjustable furniture.
|
Withdrawn |
1979-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.140
Furniture
|
| ISO/FDIS 6128 |
Laminated products made of bamboo strips for indoor furniture purposes — Requirements and test methods |
|
Under development |
|
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.140
Furniture
|
| ISO 7170:2005 |
Furniture — Storage units — Determination of strength and durability |
ISO 7170:2005 specifies test methods for determining the strength and durability of storage units that are fully assembled and ready for use, including their movable and non-movable parts. The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.
The test results are only valid for the unit/component tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. Tests carried out according to ISO 7170:2005 are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. The tests have been developed for units/components that have not been in use. However, when properly justified, they may be used for fault investigation.
Assessment of ageing and degradation is not included.
|
Withdrawn |
2005-12 |
Edition : 2 |
Number of pages : 32 |
Technical Committee |
97.140
Furniture
|
| ISO 7170:2021 |
Furniture — Storage units — Test methods for the determination of strength, durability and stability |
This document specifies test methods for determining the strength, durability and stability of storage units, when fully assembled prior to use, including their movable and non-movable parts.
Acceptance criteria for the strength, durability and stability of the storage furniture is not specified by the test methods. Instead, suggested loads, cycles and forces are provided in Annex B, depending on the applicability of the furniture.
|
Published |
2021-09 |
Edition : 3 |
Number of pages : 59 |
Technical Committee |
97.140
Furniture
|
| ISO 7171:1988 |
Furniture — Storage units — Determination of stability |
The specified methods are applicable to free-standig storage furniture including cupboards, cabinets and bookshelves that are fully assembled and ready for use. Wall-mounted or otherwise built-in units are not covered. The test results are only valid for the article tested. When they are intended to be applied to other similar articles, the test specimen should be representative of the production model. Otherwise the test should be carried out as far as possible as described and the deviations from the test procedure reported.
|
Withdrawn |
1988-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.140
Furniture
|
| ISO 7171:2019 |
Furniture — Storage units — Test methods for the determination of stability |
This document specifies test methods for determining the stability of free-standing storage units that are fully assembled and ready for use.
The test results are only valid for the unit/component tested. These results can be used to represent the performance of production models provided that the tested model is representative of the production model.
This document specifies test methods only. It does not specify requirements for specific forces that the storage unit must withstand without overturning. It is intended that these be specified in a requirements document.
|
Withdrawn |
2019-02 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
97.140
Furniture
|
| ISO 7172:1988 |
Furniture — Tables — Determination of stability |
|
Published |
1988-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.140
Furniture
|
| ISO 7173:1989 |
Furniture — Chairs and stools — Determination of strength and durability |
Test methods are described for all types of chairs, easy chairs and stools except reclining or tilted chairs in the reclined or tilted position and chairs for specific fields of use. Assessment of ageing and degradation and tests for stuffing materials, upholstery fabrics or foam cushions are not included. The tests are designed to be applied to articles that are fully assembled and ready for use. Forces and dimensions therein are applicable to chairs and stools intended for adult persons.
|
Published |
1989-07 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
97.140
Furniture
|
| ISO/FDIS 7173 |
Furniture — Chairs and stools — Determination of strength and durability |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
97.140
Furniture
;
97.140
Furniture
|
| ISO 7174-1:1988 |
Furniture — Chairs — Determination of stability — Part 1: Upright chairs and stools |
The calculative and experimental methods are not applicable to settees and other multiple seating, nor to swivelling or rocking chairs. They include chairs with tilting, reclining and adjustable back-angle mechanisms only when used as upright chairs. Part 2 of ISO 7174 deals with the stability of such chairs when fully reclined. The annex does form part of ISO 7174-1. The chart gives suggested minimum overturning forces applicable to all types of adult chairs according to their loaded seat heights.
|
Published |
1988-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.140
Furniture
|
| ISO 7174-2:1992 |
Furniture — Chairs — Determination of stability — Part 2: Chairs with tilting or reclining mechanisms when fully reclined, and rocking chairs |
Describes methods for determining the rearward stability of the chairs. Forward and sideward stability is determined by methods described in ISO 7174-1. The test results are only valid for the article tested.
|
Published |
1992-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.140
Furniture
|
| ISO 7175-1:1997 |
Children's cots and folding cots for domestic use — Part 1: Safety requirements |
|
Withdrawn |
1997-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.140
Furniture
|
| ISO 7175-1:2019 |
Furniture — Children's cots and folding cots for domestic use — Part 1: Safety requirements |
This document specifies requirements for children's cots and folding cots for domestic use with an internal length of between 900 mm and 1 400 mm.
This document applies to cots that are fully assembled and ready for use.
NOTE It is possible that additional requirements be applied for cots that can be converted into other items (e.g. changing units, playpens).
This document does not apply to carry cots, cribs and cradles for which separate International Standards exist.
|
Published |
2019-01 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.140
Furniture
|
| ISO 7175-2:1988 |
Furniture — Children's cots — Safety requirements and testing — Part 2: Test methods |
|
Withdrawn |
1988-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.140
Furniture
;
97.190
Equipment for children
|
| ISO 7175-2:1997 |
Children's cots and folding cots for domestic use — Part 2: Test methods |
|
Withdrawn |
1997-08 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
97.140
Furniture
|
| ISO 7175-2:2019 |
Furniture — Children's cots and folding cots for domestic use — Part 2: Test methods |
This document specifies test methods to assess the safety of children's cots and folding cots for domestic use with an internal length of between 900 mm and 1 400 mm.
|
Published |
2019-01 |
Edition : 3 |
Number of pages : 28 |
Technical Committee |
97.140
Furniture
|
| ISO 7617-1:1988 |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics |
|
Withdrawn |
1988-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.140
Rubber and plastics products
;
97.140
Furniture
|
| ISO 7617-1:1994 |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics |
Cancels and replaces the first edition (1988). Specifies requirements for coated fabrics for upholstered furniture, manufactured by applying to one side of a single jersey weft-knitted base cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride.
|
Withdrawn |
1994-10 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
97.140
Furniture
;
59.080.40
Coated fabrics
|
| ISO 7617-1:2001 |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics |
This part of ISO 7617 specifies technical requirements for coated fabrics for upholstered furniture for interior use,
obtained by applying to one side of a weft-knitted base cloth a substantially continuous coating of a suitably
plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings
are known as poly(vinyl chloride) (PVC) coatings. The present specification covers fabrics coated with solid PVC
and also covers two grades with coatings consisting of a layer of expanded PVC.
|
Published |
2001-12 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
97.140
Furniture
;
59.080.40
Coated fabrics
|
| ISO/DIS 7617-1 |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics |
This part of ISO 7617 specifies technical requirements for coated fabrics for upholstered furniture for interior use,
obtained by applying to one side of a weft-knitted base cloth a substantially continuous coating of a suitably
plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings
are known as poly(vinyl chloride) (PVC) coatings. The present specification covers fabrics coated with solid PVC
and also covers two grades with coatings consisting of a layer of expanded PVC.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
83.140
Rubber and plastics products
;
97.140
Furniture
;
59.080.40
Coated fabrics
|
| ISO 7617-2:1988 |
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics |
|
Withdrawn |
1988-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.140
Rubber and plastics products
;
97.140
Furniture
|
| ISO 7617-2:1994 |
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics |
Cancels and replaces the first edition (1988). Specifies requirements for coated fabrics for upholstered furniture, manufactured by applying to one side of a woven cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride.
|
Withdrawn |
1994-10 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.140
Furniture
;
59.080.40
Coated fabrics
|
| ISO 8555-4:1987 |
Hardware for furniture — Terms for furniture fittings — Part 4: Holding devices, flap stays, lid stays |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 7617-2:2003 |
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics |
ISO 7617-2:2003 specifies requirements for coated fabrics for upholstered furniture, manufactured by applying to one side of a woven cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. Such coatings are known as poly(vinyl chloride) (PVC) coatings. The present specification covers two grades (A and B) of PVC-coated woven fabric.
|
Published |
2003-08 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
97.140
Furniture
;
59.080.40
Coated fabrics
|
| ISO 7617-3:1988 |
Plastics-coated fabrics for upholstery — Part 3: Specification for polyurethane-coated woven fabrics |
Specifies requirements for polyurethane-coated fabrics for upholstered furniture, where a substantially continuous coating is applied to one side of the fabric. Two annexes for the selection of the specimen and for the determination of the resistance to print wear. Part 1 of this standard: PVC-coated knitted fabrics; part 2: PVC-coated woven fabrics.
|
Published |
1988-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.140
Furniture
;
59.080.40
Coated fabrics
|
| ISO 8191-1:1987 |
Furniture — Assessment of the ignitability of upholstered furniture — Part 1: Ignition source: smouldering cigarette |
Belongs to a series of standards concerned with the major subjekt; further parts will extend the range by using larger flames. The measurements are intended for a combination of materials used in upholstered seating and not for a particular finished item of furniture incorporating these material. They only give an indication of, but cannot guarantee, the ignition behaviour of the finished item of furniture.
|
Published |
1987-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.140
Furniture
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 8191-2:1988 |
Furniture — Assessment of ignitability of upholstered furniture — Part 2: Ignition source: match-flame equivalent |
Belongs to a series of standards concerned with the major subject. The three annexes do not form integral parts of ISO 8191-2. The test methods are intended for a combination of materials used such as covers and fillings in uphlostered seating, and not for a particular finished item of furniture incorporating these materials. They only give an indication of, but cannot guarantee, the ignition behaviour of the finished item of furniture.
|
Published |
1988-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.140
Furniture
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 8554-1:1987 |
Hardware for furniture — Terms for furniture locks — Part 1: Latch lock, dead lock, rod- operating lock, central locking system, cylinder lock, combination lock |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8554-2:1987 |
Hardware for furniture — Terms for furniture locks — Part 2: Surface-mounted lock, inset-type lock, mortise lock |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8554-3:1987 |
Hardware for furniture — Terms for furniture locks — Part 3: Left hand lock, right hand lock, down lock, up lock |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8554-4:1987 |
Hardware for furniture — Terms for furniture locks — Part 4: Key, rotary lock-handle, cylinder |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8555-1:1987 |
Hardware for furniture — Terms for furniture fittings — Part 1: Assembly fittings |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8555-2:1987 |
Hardware for furniture — Terms for furniture fittings — Part 2: Hinges and flap hinges |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8555-3:1987 |
Hardware for furniture — Terms for furniture fittings — Part 3: Drawer slides and sliding door gears |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8555-5:1987 |
Hardware for furniture — Terms for furniture fittings — Part 5: Height adjusters, furniture legs, underframes |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8555-6:1987 |
Hardware for furniture — Terms for furniture fittings — Part 6: Shelf supports, hanging rails, cabinet suspension brackets |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8555-7:1987 |
Hardware for furniture — Terms for furniture fittings — Part 7: Handles, knobs, escutcheons, escutcheon insets |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8555-8:1987 |
Hardware for furniture — Terms for furniture fittings — Part 8: Castors and glides |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.140
Furniture
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 9098-1:1994 |
Bunk beds for domestic use — Safety requirements and tests — Part 1: Safety requirements |
Lays down requirements relating to the safety of bunk beds for domestic use. Intended to minimize the risk of accidents happening to children. Only the sleeping function is considered. Also applies to single beds for use at a height of the bed base of 800 mm or more above floor level, irrespective of the use to which the space below is put.
|
Published |
1994-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.140
Furniture
|
| ISO 9098-1 |
Bunk beds and high beds — Safety requirements and tests — Part 1: Safety requirements |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
97.140
Furniture
|
| ISO 9098-2:1994 |
Bunk beds for domestic use — Safety requirements and tests — Part 2: Test methods |
Specifies test methods to assess the safety of bunk beds for domestic use. Also applies to single beds for use at a height of the bed base of 800 mm or more above floor level, irrespective of the use to which the space below is put. The tests consist of the application, to various parts of the bunk bed, of loads or forces simulating normal functional use, as well as misuse that can reasonably be expected to occur. The test results are only valid for the article testet.
|
Published |
1994-11 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.140
Furniture
|
| ISO 9098-2 |
Bunk beds and high beds — Safety requirements and tests — Part 2: Test methods |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
97.140
Furniture
|
| ISO 9221-1:1992 |
Furniture — Children's high chairs — Part 1: Safety requirements |
Specifies requirements relating to the safety of children's high chairs for domestic use, with the aim of minimizing accidents to children resulting from normal usage and reasonably foreseeable misuse.
|
Withdrawn |
1992-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.140
Furniture
|
| ISO 9221-1:2015 |
Furniture — Children's high chairs — Part 1: Safety requirements |
ISO 9221-1:2015 specifies safety requirements for children's high chairs intended for children from 6 months to 36 months of age.
If the product can be converted into a product for which an ISO safety standard exists, it is intended that the product also fulfil the requirements of that International Standard.
|
Published |
2015-11 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.140
Furniture
|
| ISO 9221-2:1992 |
Furniture — Children's high chairs — Part 2: Test methods |
Specifies test methods that assess the safety requirements given in ISO 9221-1 of children's high chairs and multi-purpose chairs for domestic use. The tests consist of the application, to various parts of the item, of forces simulating normal functional use, as well as misuse, that can reasonably be expected to occur. The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
|
Withdrawn |
1992-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.140
Furniture
|
| ISO 9221-2:2015 |
Furniture — Children's high chairs — Part 2: Test methods |
ISO 9221-2:2015 specifies test methods for the assessment of the requirements of children's high chairs.
|
Published |
2015-11 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
97.140
Furniture
|
| ISO/CD 9221 |
Furniture — Children's high chairs — Safety requirements and test methods |
This document specifies safety requirements for children's high chairs intended for children from 6 months to 36 months of age.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.140
Furniture
|