| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/DIS 12808 |
Hardware for furniture — Strength and durability of extension elements and their components |
This document specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachement, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model.
Ageing and influences of heat and humidity are not included.
|
Under development |
|
Edition : 1 |
Number of pages : 17 |
Technical Committee |
97.140
Furniture
|
| ISO 16131:2012 |
Leather — Upholstery leather characteristics — Selection of leather for furniture |
ISO 16131:2012 specifies sampling and test methods, and gives recommended values for, upholstery leather for furniture.
|
Published |
2012-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.140
Furniture
;
59.140.99
Other standards related to leather technology
|
| ISO/DIS 16502-1 |
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 1: Ignition source: smouldering cigarette |
This International Standard specifies a test method to assess the ignitability of mattresses, upholstered bed bases or mattress pads when subjected to a smouldering cigarette as an ignition source.
Air mattresses and water beds are excluded from this standard.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.140
Furniture
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/DIS 16502-2 |
Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 2: Ignition source: match flame equivalent |
This International Standard specifies a test method to assess the ignitability of mattresses, upholstered bed bases, when subjected to a gas flame as an ignition source.
Air mattresses and water beds are excluded from this standard.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.140
Furniture
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/FDIS 19682 |
Furniture — Tables — Test methods for the determination of stability, strength and durability |
|
Under development |
|
Edition : 1 |
Number of pages : 45 |
Technical Committee |
97.140
Furniture
|
| ISO 19833:2018 |
Furniture — Beds — Test methods for the determination of stability, strength and durability |
ISO 19833:2018 specifies test methods for determining the stability, strength and durability of all types of fully assembled beds including bed frames and bed bases.
ISO 19833:2018 applies to adult beds for domestic and non-domestic use. It does not apply to waterbeds, airbeds, foldaway beds, bunk beds and beds for people with special needs, nor to beds for healthcare and medical purposes.
Test methods for the assessment of ageing, degradation, fire resistance and electrical functions are not included in this document.
Other methods for the strength and durability of storage components, seating surfaces and other features associated with beds are covered by other standards.
Where a bed incorporates additional functions such as storage, electrical adjustability or conversion from a sofa to a bed, additional tests are applicable.
ISO 19833:2018 does not specify requirements for the choice of loads, cycles or forces. These can be specified in a requirements document. If this is not available, suggested loads and cycles can be found in Annex A (informative).
The tests are not intended to assess the durability of upholstery, e.g. filling materials and covers.
|
Published |
2018-03 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
97.140
Furniture
|
| ISO 21015:2007 |
Office furniture — Office work chairs — Test methods for the determination of stability, strength and durability |
ISO 21015:2007 specifies test methods for determining the stability, strength and durability of office work chairs. Guidance is given on the choice of forces, cycles, etc., for these tests.
The tests are designed to be applied to an article of furniture that is fully assembled and ready for use.
The dimensions in the tests are applicable to office work chairs intended for adult persons.
The tests consist of the application, to various parts of the item, of forces simulating normal functional use, as well as misuse that can reasonably be expected to occur.
The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The test results are valid only for the article tested. When the test results are intended to be applied to other similar articles, it is important that the test specimen be representative of the production model.
Tests carried out according to ISO 21015:2007 are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. The tests have been developed for units/components that have not been in use. However, when properly justified, they can be used for fault investigation.
Data are given for the design of seat loading pads and for the design of stability loading pad.
ISO 21015:2007 does not give any product requirements. These can be specified in a requirements document. If this is not available, possible forces and cycles are suggested. These forces and cycles can be used for adults regardless of their weight and number of working hours.
ISO 21015:2007 does not specify type approval tests for chair components.
Assessment of ageing and degradation is not included. The tests are not intended to assess the durability of upholstery, i.e. filling materials and covers.
|
Published |
2007-06 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
97.140
Furniture
|
| ISO/TR 10361:1990 |
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers |
|
Withdrawn |
1990-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 21016:2007 |
Office furniture — Tables and desks — Test methods for the determination of stability, strength and durability |
ISO 21016:2007 specifies test methods for the determination of the stability, the strength and the durability of all types of office tables designed for use in the seated and/or standing position, e.g. work tables, height-adjustable tables, meeting tables and desks. It applies to tables that are fully assembled and ready for use.
ISO 21016:2007 does not contain test methods for storage elements, which can be found in ISO 7170.
The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur.
With the exception of the deflection of table tops, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The test results are valid only for the unit/component tested. These results can be used to represent the performance of production models provided that the tested model is representative of the production model.
Tests carried out according to ISO 21016:2007 are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. It is necessary to understand that such tests do not ensure that structural failure will not eventually occur as a result of habitual misuse or after an excessively long period of service. The tests have been developed for units/components that have not been in use. However, when properly justified, they can be used for fault investigation.
ISO 21016:2007 specifies test methods only.
ISO 21016:2007 does not specify requirements. These should be specified in a requirements document. If this is not available, suggested forces and cycles are included in ISO 21016:2007.
ISO 21016:2007 does not include an assessment of ageing or degradation.
|
Published |
2007-07 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.140
Furniture
|
| ISO 22878:2004 |
Castors and wheels — Test methods and apparatus |
ISO 22878:2004 specifies the test methods and apparatus to be used to check the performance of castors and wheels.
|
Published |
2004-04 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
53.060
Industrial trucks
;
97.140
Furniture
|
| ISO 22879:2004 |
Castors and wheels — Requirements for castors for furniture |
ISO 22878:2004 specifies the technical requirements, the appropriate dimensions and the requirements for testing for castors for furniture.
It is applicable to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialized applications.
|
Withdrawn |
2004-04 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 22879:2016 |
Castors and wheels — Requirements for castors for furniture |
ISO 22879:2016 specifies the technical requirements, the appropriate dimensions and the requirements for the testing of castors for furniture.
It is applicable to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialized applications.
NOTE Castors for swivel chairs are specified in ISO 22880.
|
Published |
2016-12 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 22880:2004 |
Castors and wheels — Requirements for castors for swivel chairs |
ISO 22880:2004 specifies the technical requirements, the appropriate dimensions and the requirements for testing of castors, with or without braking devices, that will normally be used on swivel chairs.
|
Withdrawn |
2004-04 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 22880:2016 |
Castors and wheels — Requirements for castors for swivel chairs |
ISO 22880:2016 specifies the technical requirements, the appropriate dimensions and the requirements for the testing of castors, with or without braking devices, which will normally be used on swivel chairs.
|
Published |
2016-12 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
97.140
Furniture
|
| ISO 23767:2021 |
Children’s furniture — Mattresses for cots and cribs — Safety requirements and test methods |
This document specifies safety requirements and test methods for mattresses, including mattress bases and mattress toppers, used in children's cots, cribs and suspended baby beds, for domestic and non-domestic use.
This document does not apply to mattresses for carry cots and pram bodies, inflatable mattresses, water mattresses and mattresses used for medical purposes.
|
Published |
2021-07 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
97.140
Furniture
|
| ISO 23769:2021 |
Furniture — Mattresses — Test methods for the determination of functional characteristics |
This document specifies test methods for the determination of the durability, height loss and hardness of mattresses with a height ≥100 mm (and mattress pads when they form a unit with the mattress).
This document applies to adult mattresses for domestic and non-domestic use. It does not apply to water mattresses, air mattresses or standalone mattress pads.
Test methods for the assessment of aging, degradation, fire resistance and electrical functions are not included.
|
Published |
2021-11 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
97.140
Furniture
|
| ISO 24496:2017 |
Office furniture — Office chairs — Methods for the determination of dimensions |
ISO 24496:2017 specifies methods for the determination of the dimensions of office chairs.
ISO 24496:2017 does not contain dimensional specifications or requirements.
|
Withdrawn |
2017-02 |
Edition : 1 |
Number of pages : 65 |
Technical Committee |
97.140
Furniture
|
| ISO/TR 24496:2012 |
Office furniture — Office work chairs — Methods for the determination of dimensions |
|
Withdrawn |
2012-11 |
Edition : 1 |
Number of pages : 69 |
Technical Committee |
97.140
Furniture
|
| ISO 10361:2012 |
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
|
Withdrawn |
2012-03 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24496:2021 |
Office furniture — Office chairs — Methods for the determination of dimensions |
This document specifies methods for the determination of the dimensions of office chairs.
This document does not contain dimensional specifications or requirements.
|
Published |
2021-02 |
Edition : 2 |
Number of pages : 62 |
Technical Committee |
97.140
Furniture
|
| ISO 1763:1973 |
Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area |
|
Withdrawn |
1973-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1763:1986 |
Carpets — Determination of number of tufts and/or loops per unit length and per unit area |
Applicable to carpets the pile of which consists of uniformly spaced tufts and/or loops. Tufts and loops are defined, and the procedure of determination is specified. - Replaces the first edition (ISO 1763-1973) to which has been added the clause "Conditioning of test specimen", and clause 8 of which has been technically revised.
|
Withdrawn |
1986-11 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1763:2020 |
Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area |
This document specifies a method for the determination of the number of tufts and/or loops per unit length and per unit area of a textile floor covering. It is applicable to textile floor coverings with the pile of which consists of tufts and/or loops.
|
Published |
2020-07 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1764:1975 |
Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings |
|
Withdrawn |
1975-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1765:1975 |
Textile floor coverings — Determination of thickness of machine made textile floor coverings |
|
Withdrawn |
1975-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1765:1986 |
Machine-made textile floor coverings — Determination of thickness |
The method is applicable to all machine-made textile floor coverings. It forms an integral part of other methods of test for textile floor coverings, and the result of this test by itself cannot be used as an indication of the quality of the product. - Replaces the first edition /ISO 1765-1975) clauses 5 and 8 and sub-clauses 7.2 and 9.4 of which have been technically revised.
|
Published |
1986-11 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1766:1973 |
Textile floor coverings — Determination of thickness of pile above the backing |
|
Withdrawn |
1973-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1766:1986 |
Textile floor coverings — Determination of thickness of pile above the substrate |
|
Withdrawn |
1986-11 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1766:1999 |
Textile floor coverings — Determination of thickness of pile above the substrate |
This International Standard specifies a method for the determination of the thickness of pile above the substrate of a
textile floor covering. It is applicable to all textile floor coverings with pile capable of being shorn from the substrate,
but not to textile floor coverings of varying pile thickness or density, unless the areas can be measured separately.
The method is used in conjunction with ISO 8543, clause 8.
NOTE Difficulties have been experienced when using this method for bonded-pile textile floor coverings, textile floor
coverings with needled-pile and flocked-pile textile floor coverings, because of the problems of determining a suitable end point
when shearing these products. The results obtained from such products should therefore be treated with caution.
|
Published |
1999-10 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1957:1973 |
Machine-made textile floor coverings — Sampling and cutting specimens for physical tests of machine made textile floor coverings |
|
Withdrawn |
1973-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1957:1986 |
Machine-made textile floor coverings — Sampling and cutting specimens for physical tests |
|
Withdrawn |
1986-06 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 1957:2000 |
Machine-made textile floor coverings — Selection and cutting of specimens for physical tests |
This International Standard specifies a procedure to be followed when specimens are cut from samples if such specimens
are to be used for physical tests.
The reference method for selection of the sample from the bulk material is given in informative annex A.
Unless selected in accordance with annex A it is accepted that the sample taken may not necessarily be completely
representative of the bulk. It is recommended that the method of sampling be previously agreed by the parties interested
in the results of the test.
The procedure is applicable to machine-made textile floor coverings with or without pile.
|
Published |
2000-07 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2094:1999 |
Textile floor coverings — Determination of thickness loss under dynamic loading |
This International Standard specifies a method for the determination of the thickness loss of textile floor coverings under dynamic loading. It is applicable to all types of textile floor coverings with a surface that is level in height and construction. It does not apply to other textile floor coverings unless the areas of different thickness or construction can be tested separately.
|
Published |
1999-03 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2095:1977 |
Textile floor coverings — Determination of mass of effective pile per unit area that can be shorn away from the substrate |
|
Withdrawn |
1977-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2424:1977 |
Textile floor coverings — Classification and terminology |
|
Withdrawn |
1977-09 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2424:1992 |
Textile floor coverings — Vocabulary |
Gives terms and definitions in English and French as well as indexes in English and French.
|
Withdrawn |
1992-02 |
Edition : 3 |
Number of pages : 25 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2424:2007 |
Textile floor coverings — Vocabulary |
ISO 2424:2007 gives definitions of terms relating to textile floor coverings, and defines categories of these products.
|
Published |
2007-02 |
Edition : 4 |
Number of pages : 54 |
Technical Committee |
97.150
Floor coverings
|
| ISO/CD 2424 |
Textile floor coverings — Vocabulary |
ISO 2424:2007 gives definitions of terms relating to textile floor coverings, and defines categories of these products.
|
Under development |
|
Edition : 5 |
|
Technical Committee |
97.150
Floor coverings
|
| ISO 2549:1972 |
Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground |
Applicable to all hand-knotted carpets with pile capable of being shorn from the woven ground. Not applicable to carpets of different tuft leg lengths, unless the areas can be measured separately. Is applicable to carpets in which the knots are tied by finger or by hook.
|
Published |
1972-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2549:1972/Cor 1:1990 |
Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground — Technical Corrigendum 1 |
Relates to sub-clause 5.3 of the 1972 edition, in the third line of which a correction is made. In addition, the footnote is deleted.
|
Published |
1990-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2550:1972 |
Textile floor coverings — Hand-made carpets — Determination of types of knots |
Describes different types of knots used in manufacturing hand-made carpets. A visual method for identification of types of knots is given. Applicable to most carpets in which knots are tied by finger or by hook. Exyamples of types of knots are shown in figures.
|
Published |
1972-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2551:1981 |
Machine-made textile floor coverings — Determination of dimensional changes due to the effects of varied water and heat conditions |
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 2551:2020 |
Textile floor coverings and textile floor coverings in tile form — Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
This document specifies a procedure for the determination of the dimensional changes and distortion out of plane likely to take place when textile floor coverings and tiles are subjected to varied water and heat conditions.
The method is applicable to all textile floor coverings and textile floor coverings in tile form.
|
Published |
2020-05 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 3018:1974 |
Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions |
The method is applicable to textile floor coverings rectangular in dimensions, both hand-made and machine-made, having a length to width ratio of less than 5. Not applicable to material to be laid edge to edge as tiles. Definitions of the main terms are given.
|
Published |
1974-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 3415:1975 |
Textile floor coverings — Determination of thickness after brief, moderate static loading |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 20253:2016 |
Textile floor coverings — Blade test — Flocked textile floor covering |
ISO 20253:2016 specifies a laboratory test method to determine the abrasion resistance and fibre bind of flocked textile floor coverings.
|
Withdrawn |
2016-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 3415:1986 |
Textile floor coverings — Determination of thickness loss after brief, moderate static loading |
Intended to simulate the effect of the pressure exerted by a chair leg for a short period. Applicable to all textile floor coverings of uniform thickness and construction. Not applicable to other textile floor coverings unless the areas of different thickness or construction can be separately tested. The determination of thickness loss after prolonged, heavy static loading see ISO 3416. - Replaces the first edition (SIO 3415-1975), the clauses 4 and 7 of which have been technically revised.
|
Published |
1986-10 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 3416:1975 |
Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 3416:1986 |
Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading |
Intended to simulate the effect of the pressure exerted by a chair leg for a short period. Applicable to all textile floor coverings of uniform thickness and construction. Not applicable to other textile floor coverings unless the areas of different thickness or construction can be separately tested. The determination of thickness loss after prolonged, heavy static loading see ISO 3416. - Replaces the first edition (ISO 3415-1975), the clauses 4 and 7 of which have been technically revised.
|
Published |
1986-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4760:2022 |
Laminate flooring — Topical moisture resistance — Assembled joint |
This document specifies a test method to evaluate moisture resistance to surface water exposure of a joined, floating, laminate flooring assembly/element. This document also establishes criteria for rating and assessing performance.
|
Published |
2022-05 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4918:2009 |
Resilient, textile and laminate floor coverings — Castor chair test |
ISO 4918:2008 specifies methods for assessment of the wear behaviour of textile floor coverings, assessment of the change in colour (glossing) of needled floor coverings without a pile, assessment of the general structural integrity of textile floor coverings, and determination of susceptibility to surface crazing, construction integrity and joint stability for resilient or laminate floor covering, including joints.
The methods involve subjecting the test piece to the movement of a castor chair.
|
Withdrawn |
2009-09 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TR 4918:1990 |
Textile floor coverings — Determination of wear — Castor chair test |
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4918:2016 |
Resilient, textile and laminate floor coverings — Castor chair test |
ISO 4918:2016 specifies methods for determining the change of appearance and stability of a textile floor covering or any damage caused by detachment of layers, opening of joints, or crazing of a resilient or laminate floor covering under the movement of a castor chair.
|
Published |
2016-03 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4918:2016/Amd 1:2018 |
Resilient, textile and laminate floor coverings — Castor chair test — Amendment 1: Surface hardness |
|
Published |
2018-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4919:1978 |
Textile floor coverings — Determination of tuft withdrawal force |
Applicable to all carpets and textile floor coverings with a cut or loop pile yarn structure. One end of a tuft is gripped or a loop is hooked, and the maximum force registered during the removal process is recorded. One possible form of flat horizontal mounting is illustrated in an added figure.
|
Withdrawn |
1978-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4919:2012 |
Carpets — Determination of tuft withdrawal force |
ISO 4919:2012 specifies a method for determination of tuft withdrawal force and is applicable to all carpets with a cut or loop pile yarn structure.
|
Published |
2012-08 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 5086:1977 |
Textile floor coverings — Hand-knotted carpets — Sampling and selection of areas of test |
The method specifies the sampling (with figure) and defines the areas for the physical testing and chemical analysis of hand-knotted carpets. It is applicable to most carpets in which the knots are tied by finger or by hook. Each carpet should be tested separately.
|
Published |
1977-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 9239-1:1997/Cor 1:1997 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 1 |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/TR 6131:1986 |
Textile floor coverings — Tetrapod Walker apparatus — Constructional details and instructions for use |
Applicable to all textile floor coverings with a thickness not greater than 20 mm. The tetrapod comprises a metal casting with four legs each of which has a polyurethane foot at the end. The top of each foot is hemispherical. The measurements of the hardness of the tetrapod food top is described in Annex A. The multi-drum system, as illustrated in Annex B, may be used, provided that it meets all the requirements of this Technical Report.
|
Withdrawn |
1986-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6347:1989 |
Textile floor coverings — Consumer information |
Applicable to textile floor coverings of all types. Specifies the technical matters forming the basis for the provision of information, at the point of sale, for the guidance of the consumer prior to and after the purchase of a textile floor covering. This information shall be provided with the textile floor coverings at all stages from manufacturer to consumer.
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6347:2004 |
Textile floor coverings — Consumer information |
ISO 6347:2004 specifies the technical subjects that form the basis for the provision of information, at the point of sale, for the guidance of the consumer prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.
|
Withdrawn |
2004-09 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6347:2017 |
Textile floor coverings — Consumer information |
ISO 6347:2017 specifies the technical subjects that form the basis for the provision of information, at the point of sale, for consumer guidance prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.
|
Published |
2017-02 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
97.020
Home economics in general
;
97.150
Floor coverings
|
| ISO 6356:2000 |
Textile floor coverings — Assessment of static electrical propensity — Walking test |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TR 6356:1982 |
Textile floor coverings — Assessment of static electrical propensity — "Walking" test |
|
Withdrawn |
1982-10 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6356:2012 |
Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
ISO 6356:2012 specifies a method of evaluating the electrostatic propensity of textile and laminate floor coverings under controlled conditions. Since the potential generated varies with humidity, shoe materials, walk surface and individuals' mannerisms, the values generated by this test will not necessarily duplicate actual field experience, but will provide a relative comparison of the performance of different surfaces.
For classification purposes and in cases of dispute, the measurement procedure specified in ISO 6356:2012 can be used under controlled conditions specified in the relevant classification standard or agreed between disputing parties. There may be occasions where measurements are required under non-controlled conditions, e.g. in situ measurements on installed floor coverings. The principle of measurement using the equipment specified in ISO 6356:2012 can be used to make measurements, either with the standard footwear specified or with specific footwear relevant to the end use.
|
Published |
2012-07 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6925:1982 |
Textile floor coverings — Burning behaviour — Tablet test at ambient temperature |
The method established applies to all types of textile floor coverings independent of their construction or their fibre composition. The method may also be applicable to unfinished material. In this case, the result does not indicate the behaviour of the material in the condition in which is used.
|
Published |
1982-03 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 8543:1986 |
Textile floor coverings — Methods for determination of mass |
|
Withdrawn |
1986-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 8543:1998 |
Textile floor coverings — Methods for determination of mass |
|
Withdrawn |
1998-05 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 8543:2020 |
Textile floor coverings — Methods for determination of mass |
This document specifies methods for the determination of the total mass per unit area, total pile mass per unit area, and mass of pile per unit area above the substrate, and for the calculation of measured surface pile density and measured pile fibre volume ratio of textile floor coverings.
|
Published |
2020-06 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 9239-1:1997 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source |
|
Withdrawn |
1997-05 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9239-1:1997/Cor 2:1998 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 2 |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9239-1:2002 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source |
|
Withdrawn |
2002-01 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9239-1:2010 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source |
ISO 9239-1:2010 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.
This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
ISO 9239-1:2010 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
|
Published |
2010-06 |
Edition : 3 |
Number of pages : 25 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/CD 9239-1 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source |
This part of ISO 9239 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Annex A gives details of assessing the smoke development, when required.
This method is applicable to all types of flooring, e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Information on the precision of the test method is given in Annex B.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9239-2:2002 |
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2 |
ISO 9239-2 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover).
This method is applicable to all types of flooring such as textile carpets, cork, wood, rubber and plastic coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay, or other changes of the flooring may affect test results.
This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
|
Published |
2002-12 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9405:2001 |
Textile floor coverings — Assessment of changes in appearance |
|
Withdrawn |
2001-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TR 9405:1990 |
Textile floor coverings — Assessment of changes in appearance |
|
Withdrawn |
1990-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 9405:2015 |
Textile floor coverings — Assessment of changes in appearance |
ISO 9405:2015 describes the procedures for assessing the overall change in appearance of textile floor coverings caused by Vettermann drum and hexapod tumbler testers according to ISO 10361 and ISO 4918.
|
Published |
2015-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10361:2000 |
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers |
|
Withdrawn |
2000-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 3844:1977 |
Shoe sizes — Method of marking |
|
Withdrawn |
1977-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
61.060
Footwear
|
| ISO 10361:2015 |
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
ISO 10361:2015 describes procedures that use the mechanical action of a Vettermann drum or a hexapod tumbler tester to produce changes in appearance (surface structure and colour) to all types of textile floor coverings. It does not include pilling or colour changes due to other actions.
Changes produced by these drum testers are assessed in accordance with the applicable assessment standard.
|
Published |
2015-02 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10575:2012 |
Resilient floor coverings — Specification for rubber sheet floor coverings with backing |
ISO 10575:2012 specifies the characteristics of rubber sheet floor coverings with backing.
ISO 10575:2012 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10577:2012 |
Resilient floor coverings — Specification for rubber sheet floor coverings without backing |
ISO 10577:2012 specifies the characteristics of rubber sheet floor coverings without backing.
ISO 10577:2012 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10580:2010 |
Resilient, textile and laminate floor coverings — Test method for volatile organic compound (VOC) emissions |
ISO 10580:2010 specifies a general laboratory test method for determination of the area-specific emission rate of volatile organic compounds (VOC) and/or the vapour-phase VOC concentration under defined climate conditions.
ISO 10580:2010 describes emission test chambers used for the determination of the emission of volatile organic compounds from resilient, textile and laminate floor coverings.
|
Published |
2010-05 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10581:2011 |
Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications |
ISO 10581:2011 specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10581:2011 includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. ISO 10581:2011 also specifies requirements for marking.
|
Withdrawn |
2011-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10581:2019 |
Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications |
This document specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products can contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, this document also includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking.
|
Published |
2019-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10582:2010 |
Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor coverings — Specification |
ISO 10582:2010 specifies the characteristics of non-cushioned, heterogeneous floor coverings, based on poly(vinyl chloride) (PVC), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10582:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking.
|
Withdrawn |
2010-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10582:2017 |
Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor covering — Specifications |
ISO 10582:2017 specifies the characteristics of non-cushioned, heterogeneous floor coverings, consisting of poly(vinyl chloride) (PVC), supplied in either tile or plank or roll form. Products can contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10595:2010 |
Resilient floor coverings — Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles — Specification |
ISO 10595:2010 specifies the characteristics of semi-flexible/vinyl composition floor tiles based on poly(vinyl chloride) (PVC) binder and supplied in tile form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10595:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking
|
Published |
2010-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10833:1992 |
Textile floor coverings — Determination of mechanical damage at a cut edge — Modified Vettermann drum tester method |
The principle of the method is randomly rolling a metal ball with six rubber studs inside a rotating drum which is lined with the specimens. The specimens have an inclined longitudinal cut down the centre. After fatiguing, the mechanical damage of the cut edges is assessed.
|
Withdrawn |
1992-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10833:2001 |
Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test |
|
Withdrawn |
2001-07 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10833:2017 |
Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test |
ISO 10833:2017 specifies a method to determine the susceptibility of textile floor coverings to mechanical damage at cut edges.
It is applicable to all textile floor coverings both as sheet materials and as tiles.
|
Published |
2017-05 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10834:1992 |
Textile floor coverings — Non-destructive measurement of pile thickness above the backing — WRONZ gauge method |
The method is based on determination by measuring the distance between the planes of the pile surface located under a standard pressure and the plane of the backing surface located under a standard loading. This method and that of ISO 1766 may not give identical results. In case of dispute or where maximum accuracy is required, thickness shall be determined by the method of ISO 1766.
|
Published |
1992-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10874:2009 |
Resilient, textile and laminate floor coverings — Classification |
ISO 10874:2009 establishes a classification system for resilient, textile and laminate floor coverings. The classification is based on practical requirements for areas of use and intensity of use and is linked to the requirements specified in the relevant International Standard for each type of floor covering.
ISO 10874:2009 is also intended to provide guidance for manufacturers, specifiers and consumers, to enable them to choose the appropriate class of floor covering for any given area of use or specific room.
|
Published |
2009-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10874:2009/Amd 1:2020 |
Resilient, textile and laminate floor coverings — Classification — Amendment 1: Elimination of class 22+ |
|
Published |
2020-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10965:1998 |
Textile floor coverings — Determination of electrical resistance |
|
Withdrawn |
1998-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10965:1998/Cor 1:1999 |
Textile floor coverings — Determination of electrical resistance — Technical Corrigendum 1 |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10965:2011 |
Textile floor coverings — Determination of electrical resistance |
ISO 10965:2011 describes a laboratory method for the determination of the electrical resistance of textile floor coverings. The method includes both horizontal and vertical measurements.
|
Published |
2011-07 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11377:1997 |
Textile floor coverings — Floor soiling — Test site set-up and soiling evaluation |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11378-1:2000 |
Textile floor coverings — Laboratory soiling tests — Part 1: Kappasoil test |
This part of ISO 11378 specifies a method for assessing the propensity of textile floor coverings to soiling using an
artificial soil composition.
The scope of this test method can be extended to assess the efficiency of cleaning chemicals, and cleaning
equipment (see annex A).
|
Published |
2000-04 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.150
Floor coverings
|