| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 11378-2:2001 |
Textile floor coverings — Laboratory soiling tests — Part 2: Drum test |
|
Published |
2001-05 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11378-2:2001/Amd 1:2017 |
Textile floor coverings — Laboratory soiling tests — Part 2: Drum test — Amendment 1 |
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11379:1997 |
Textile floor coverings — Laboratory cleaning procedure using spray extraction |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11379:2009 |
Textile floor coverings — Laboratory cleaning procedure using spray extraction |
ISO 11379:2009 describes a laboratory-scale textile-floor-covering cleaning procedure using a spray-extraction technique. ISO 11379:2009 is applicable to all kinds of textile floor coverings, both machine-made and hand-made.
|
Published |
2009-02 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11638:2012 |
Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification |
ISO 11638:2012 specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile. Such products can contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 11638:2012 includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
ISO 11638:2012 also specifies requirements for marking.
|
Withdrawn |
2012-08 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11638:2020 |
Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification |
This document specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile and plank. Such products can contain a transparent, non PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
It also specifies requirements for marking.
|
Published |
2020-03 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11856:2014 |
Textile floor coverings — Test methods for the determination of fibre bind using a Modified Martindale Machine |
The method in ISO 11856:2014 uses a modified Martindale fabric abrasion machine to assess fibre loss in pile carpets by weighing the amount of fibre removed at specified intervals. It is applicable to all types of cut pile, wool-rich textile floor coverings.
|
Withdrawn |
2014-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO/PAS 11856:2003 |
Textile floor coverings — Test methods for the determination of fibre bind |
ISO PAS 11856 describes the following six methods for determining fibre bind of textile floor coverings. Each test method states the type(s) of textile floor coverings for which the test is applicable.
Lisson Tretrad test:Method A for mass loss for synthetic cut pile carpets;Method B for appearance change of synthetic loop pile carpets.Modified Martindale machine test for mass loss/appearance change.Hexapod tumbler test for mass loss.Japanese fibre bind test.Usometer test for fuzzing and pilling of loop pile carpets.Fiberlock tester test for fuzzing and pilling of loop pile carpets.
|
Withdrawn |
2003-01 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11857:1999 |
Textile floor coverings — Determination of resistance to delamination |
This International Standard describes a method for the determination of the force required to separate the plies of
textile floor coverings. It is applicable to all types of textile floor coverings with a secondary or foam backing.
The results obtained by this method are useful as a control of production but cannot be considered to be a reliable
indication of in-use performance.
|
Published |
1999-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11858:1999 |
Textile floor coverings — Determination of friability of attached foams |
1.1 This International Standard specifies a procedure for assessing the friability of foam backings attached to
textile floor coverings.
1.2 This International Standard is not suitable for evaluating the propensity of a foam backing to break down after
installation, since such break-down is invariably due to a combination of flexing fatigue and oxidation, factors which
are not covered in this International Standard.
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11859:1999 |
Textile floor coverings — Pure wool, hand-knotted pile carpets — Specification |
This International Standard specifies requirements for hand-knotted carpets produced from pure wool, of
dimensions agreed between the purchaser and the supplier.
|
Published |
1999-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11860:1999 |
Textile floor coverings — Jute carpet backing fabric — Specification |
This International Standard specifies requirements for primary and secondary jute carpet backing fabrics.
|
Published |
1999-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11861:1999 |
Textile floor coverings — Coir mats — Types and specification |
This International Standard specifies the requirements for mats produced from coir fibre, with or without pile.
|
Published |
1999-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12951:1999 |
Textile floor coverings — Determination of mass loss using the Lisson test |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12951:2015 |
Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine |
ISO 12951:2015 specifies four methods of test of textile floor coverings (with or without an underlay, see Clause 9) using the Lisson Tretrad machine.
- test A: determination of mass loss of textile floor coverings, also used to assess fibre bind of synthetic pile carpets;
- test B: determination of stair nosing appearance change of textile floor coverings;
- test C: determination of fibre bind on synthetic loop pile carpets;
- test D: determination of fibre bind (hairiness) on needled floor coverings and floor coverings without pile.
|
Withdrawn |
2015-09 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12951:2020 |
Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine |
This document specifies four methods of test for textile floor coverings (with or without an underlay, see Clause 9) using the Lisson Tretrad machine.
— test A: determination of mass loss of textile floor coverings, also used to assess fibre bind of synthetic pile carpets;
— test B: determination of stair nosing appearance change of textile floor coverings;
— test C: determination of fibre bind on synthetic loop pile carpets;
— test D: determination of fibre bind (hairiness) on needled floor coverings and floor coverings without pile.
|
Published |
2020-05 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
97.150
Floor coverings
|
| ISO 13746:2000 |
Textile floor coverings — Guidelines for installation and use on stairs |
|
Withdrawn |
2000-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 13746:2019 |
Textile floor coverings — Guidelines for installation and use on stairs |
This document provides recommendations for the installation and use of textile floor coverings on stairs for both residential/domestic and contract/commercial purposes. It covers all products composed of textile material with a pile or non-pile use surface including the use of such products in tile form.
This document is applicable only to carpets that are intended to be installed without the use of protective stair nosings. For carpets that are intended to be installed using protective stair nosings, the overall use class determines the stair suitability.
NOTE 1 The use of stair nosings/edgings in public areas is often the subject of local bye-laws and legislations.
NOTE 2 In many split-level dwellings, a room can have one or two steps between different levels. This situation differs from a stairway in several important respects:
— the steps are usually wider and therefore traffic intensity in any one place is usually lower;
— the carpet can be bent over steps in either the machine direction or the across-machine direction. On a stairway, it is normal practice to lay the carpet with the pile lying down the stairs.
|
Published |
2019-06 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 13747:1999 |
Textile floor coverings — Determination of size, squareness and straightness of edge of tiles |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 13750:2000 |
Textile floor coverings — Determination of resistance to staining by acid food colours |
This International Standard specifies the procedure for assessing textile floor coverings for resistance to staining by
acid food colours. The apparent intensity of the stain will vary with the colour of the floor covering.
|
Published |
2000-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO/CD 14486 |
Laminate floor coverings — Specification |
This International Standard specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking and packaging.
Laminate floor coverings are generally designed for floating installations for interior use and are considered for domestic and commercial levels of use, including domestic kitchens. This document does not specify requirements relating to the use in areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas. In general laminate floor coverings can only be used in those areas when authorized by the manufacturer and under conditions described in the manufacturer's installation guidelines.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.150
Floor coverings
|
| ISO 14486:2012 |
Laminate floor coverings — Specification |
ISO 14486:2012 specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.
|
Published |
2012-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 16581:2014 |
Resilient and laminate floor coverings — Determination of the effect of simulated movement of a furniture leg |
ISO 16581:2014 specifies a method for determining the resistance of an installed resilient or laminate floor covering to the mechanical stress resulting from the simulated movement of a furniture leg.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 16905:2015 |
Resilient floor coverings — Specification for rubber floor covering — Tile/Plank |
ISO 16908:2015 specifies the characteristics of rubber floor tile/planks.
ISO 16908:2015 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service.
ISO 16908:2015 specifies rubber floor tile/planks for applications involving the use of normal footwear and does not cover applications where special footwear, such as spiked shoes, may be involved.
|
Published |
2015-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 16906:2015 |
Resilient floor coverings — Determination of seam strength |
ISO 16906:2015 specifies a method for determining the strength of the seams of resilient floor coverings when welded in accordance with the manufacturer's instructions.
|
Published |
2015-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 17504:1999 |
Textile floor coverings — Determination of wool fibre integrity using an abrasion machine |
This International Standard specifies a method for the determination of fibre damage in the pile of textile floor
coverings having a pile material of at least 80 % wool.
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 17984:2014 |
Machine-made textile floor coverings — Determination of dimensional changes after exposure to heat and/or water |
ISO 17984:2014 specifies procedures for the determination of both planar and out-of-plane dimensional changes that take place when machine-made textile floor coverings are subjected to heat, water, or varied heat and water conditions.
The following methods are applicable to all machine-made textile floor coverings including those produced in tile form: Method 1, Determination of dimensional changes after exposure to heat; Method 2, Determination of dimensional changes after immersion in water; Method 3, Determination of dimensional changes due to the effects of varied heat and water conditions; and Method 4, Dimensional changes out of the plane.
|
Withdrawn |
2014-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO/PAS 17984:2001 |
Machine-made textile floor coverings — Determination of dimensional changes after exposure to heat and/or water |
|
Withdrawn |
2001-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 18167:2020 |
Textile floor coverings — Installation practices — General |
This document sets out the requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor surfaces together with the procedures that are to be adopted where textile floor coverings are laid over various types of subfloors and underlays and where subfloor heating units are installed.
NOTE This document addresses needle insertion tufted, woven, fusion bonded, fibre bonded, knitted, non-woven, felted, and flocked textile floor coverings.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 41 |
Technical Committee |
97.150
Floor coverings
|
| ISO/PAS 18167:2014 |
Textile floor coverings — Installation practices — General |
ISO/PAS 18167:2014 sets out the requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor surfaces together with the procedures that are to be adopted where textile floor coverings are laid over various types of subfloors and underlays and where subfloor heating units are installed.
NOTE This International Standard addresses needle insertion tufted, woven, fusion bonded, fibre bonded, knitted, non-woven, felted, and flocked textile floor coverings.
The objective of this International Standard is to provide the contractors, manufacturers, suppliers, and purchasers of textile floor coverings and others, for example, technical educators, with procedures to enable the provision of correctly installed textile floor coverings.
|
Withdrawn |
2014-12 |
Edition : 1 |
Number of pages : 42 |
Technical Committee |
97.150
Floor coverings
|
| ISO 18168:2015 |
Textile floor coverings — Colour fastness to shampooing |
ISO 18168:2015 describes a method for determining the colour fastness of textile floor coverings and yarns, loose fibres and tufts extracted from textile floor coverings, to the action of a reference shampoo solution.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 19322:2018 |
Resilient floor coverings — Specification for floor coverings based on thermoplastic polymers |
ISO 19322:2018 specifies the characteristics for resilient floor coverings based upon thermoplastic polymers, supplied either in roll, plank or tile form.
To encourage the consumer to make an informed choice, this document includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.
This specification does not apply to floor coverings specified in ISO 10581, ISO 10582, ISO 10595, ISO 11638, ISO 10575, ISO 10577, ISO 24011 and ISO 26986.
|
Published |
2018-03 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.150
Floor coverings
|
| ISO 20251:2016 |
Textile floor coverings — Water impermeability test |
ISO 20251:2016 specifies a laboratory test method for determining the water impermeability of textile floor coverings.
This method cannot be used to characterize a wall-to-wall installation of textile floor covering tiles.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 20326:2016 |
Resilient floor coverings — Specification for floor panels/assembly for loose laying |
ISO 20326:2016 specifies requirements and test methods for floor panels/assembly for domestic and commercial levels of use, which have surface layers consisting of resilient floor covering.
ISO 20326:2016 is not applicable to heterogeneous polyvinyl chloride floor panels/assembly for floating installation covered by ISO 10582 or to floor panels/assembly that are subject to frequent wetting, such as bathrooms, laundry rooms and saunas.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.150
Floor coverings
|
| ISO 20326:2016/Amd 1:2020 |
Resilient floor coverings — Specification for floor panels/assembly for loose laying — Amendment 1: Requirements depending on the substrate |
|
Published |
2020-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 21629-1:2021 |
Bamboo floorings — Part 1: Indoor use |
This document specifies the technical requirements and test methods for indoor bamboo flooring for internal use.
This document also specifies handling, storage, packaging and marking requirements.
It is applicable to unfinished and finished indoor bamboo flooring. This includes laminated bamboo flooring, bamboo scrimber flooring, bamboo - wood composite flooring, and flattened bamboo flooring.
|
Published |
2021-06 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.150
Floor coverings
|
| ISO 21629-2:2022 |
Bamboo floorings — Part 2: Outdoor use |
This document specifies the technical requirements, test methods and requirements for the handling, storage, packaging and marking of outdoor bamboo flooring.
It is applicable to outdoor bamboo flooring including bamboo laminated flooring and bamboo scrimber flooring
|
Published |
2022-08 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TS 21868:2021 |
Textile floor coverings — State of the art and guidance on maintenance and cleaning |
This document specifies guidelines for the development of specific textile floor covering maintenance and cleaning standards, procedures and criteria to reflect locally specific conditions. This document specifies the factors which are likely to impact the final results of textile floor covering cleaning, defining maintenance and cleaning terms to highlight differences. It establishes low-cost, non-residue and environmentally-friendly guidance for textile floor covering maintenance and cleaning under the premise of maximizing the use value of textile floor covering.
|
Withdrawn |
2021-06 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TS 21868:2023 |
Textile floor coverings — State of the art on maintenance and cleaning |
This document gives guidelines for the development of specific textile floor covering maintenance and cleaning standards, procedures and criteria to reflect local specific conditions. This document specifies the factors which will impact the final results of textile floor covering cleaning, defining maintenance and cleaning terms to highlight differences. It establishes textile floor covering maintenance and cleaning as achieving a low-cost, non-residue and environmentally friendly cleaning under the premise of maximizing the use value of textile floor covering.
|
Published |
2023-02 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23996:2007 |
Resilient floor coverings — Determination of density |
ISO 23996:2007 describes two methods for determining the density of homogeneous resilient floor coverings and solid layers of other resilient floor coverings.
|
Published |
2007-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23997:2007 |
Resilient floor coverings — Determination of mass per unit area |
ISO 23997:2007 describes a method for determining the mass per unit area of a resilient floor covering.
|
Published |
2007-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23999:2008 |
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat |
ISO 23999:2008 specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets and tiles, in linear dimensions after exposure to heat.
|
Withdrawn |
2008-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23999:2018 |
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat |
This document specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets, tile or planks after exposure to heat.
|
Withdrawn |
2018-07 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23999:2021 |
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat |
This document specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets, tiles or planks after exposure to heat.
|
Published |
2021-11 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24011:2009 |
Resilient floor coverings — Specification for plain and decorative linoleum |
ISO 24011:2009 specifies the characteristics of plain and decorative linoleum, supplied as either tiles or rolls.
To encourage the consumer to make an informed choice, ISO 24011:2009 includes a classification system based on the intensity of use, which shows where resilient floor coverings provide satisfactory service.
The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on poly(vinyl chloride) or rubber. Such materials are not included in ISO 24011:2009.
|
Published |
2009-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24334:2006 |
Laminate floor coverings — Determination of locking strength for mechanically assembled panels |
ISO 24334:2006 specifies a method for the determination of the locking strength of joints between laminate floor covering panels, which are assembled with both vertical and horizontal mechanical locking systems.
|
Withdrawn |
2006-08 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24334:2014 |
Laminate floor coverings — Determination of locking strength for mechanically assembled panels |
ISO 24334:2014 specifies a method for the determination of the locking strength of joints between laminate floor covering panels which are assembled with both vertical and horizontal mechanical locking systems.
|
Withdrawn |
2014-12 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24334:2019 |
Laminate floor coverings — Determination of locking strength for mechanically assembled panels |
This document specifies a method for determination of the locking strength of joints between laminate floor covering panels which are assembled with both vertical and horizontal mechanical locking systems.
NOTE This method is also applicable to other mechanically assembled panels, e.g. modular multilayer floorings.
|
Published |
2019-07 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24335:2006 |
Laminate floor coverings — Determination of impact resistance |
ISO 24335:2006 specifies how to determine the impact resistance of laminate floor covering elements. The test described measures the ability of the surface layer to withstand impact from both small and large objects dropped on the floor covering. The testing is destructive by means of the impact on the surface layer from one small and one larger steel ball simulating different scenarios. The force of the small steel ball and the drop height of the larger steel ball are used to define the ability for a laminate floor covering element to withstand impact.
|
Withdrawn |
2006-03 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24335:2022 |
Laminate floor coverings — Determination of impact resistance |
This document specifies how to determine the impact resistance of laminate floor covering elements. The test described measures the ability of the surface layer to withstand impact from both small and large objects dropped on the floor covering. The testing is destructive by means of the impact on the surface layer from one small and one larger steel ball simulating different scenarios. The falling height of both the small and the large steel ball is used to define the ability for a laminate floor covering element to withstand impacts. Both tests are generally carried out on parts of the laminate floor panels with suitable sizes.
The precision of the large-diameter ball method is not known. When interlaboratory data become available, a precision statement will be added in subsequent revisions. The precision regarding the small diameter method is stated in Clause 8.
|
Published |
2022-08 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24336:2005 |
Laminate floor coverings — Determination of thickness swelling after partial immersion in water |
ISO 24336:2005 specifies a test method for the determination of thickness swelling of laminate floor-covering elements after partial immersion in water. The testing is destructive and is mainly intended to evaluate the behaviour of the laminate floor-covering element in contact with water. Possible pre-attached soft backing material, sub-layers or any other material integrated at the underside of the floor-covering element are not included in the test and should therefore be removed before testing.
|
Published |
2005-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24337:2006 |
Laminate floor coverings — Determination of geometrical characteristics |
ISO 24337:2006 gives test methods to determine the dimensional variance between elements of laminate floor coverings in a manufactured free-standing shape (unrestricted) in respect to thickness, length, width, squareness, straightness, width flatness, length flatness, openings between assembled elements and height differences between assembled elements.
|
Withdrawn |
2006-08 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
79.080
Semi-manufactures of timber
;
97.150
Floor coverings
|
| ISO 24337:2019 |
Laminate floor coverings — Determination of geometrical characteristics |
This document gives test methods to determine the dimensional variance between elements of laminate floor coverings in a manufactured free-standing shape (unrestricted) in respect of thickness, length, width, squareness, straightness, width flatness, length flatness, openings between assembled elements and height differences between assembled elements.
NOTE These test methods are also applicable to other mechanically assembled panels, e.g. modular multilayer floorings.
|
Published |
2019-11 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
79.080
Semi-manufactures of timber
;
97.150
Floor coverings
|
| ISO 24338:2006 |
Laminate floor coverings — Determination of abrasion resistance |
ISO 24338:2006 specifies a method for measuring abrasion of laminate floor covering elements. The test described measures the ability of the surface layer to resist abrasive wear-through. Abrasion is achieved by rotating a test specimen in contact with a pair of loaded cylindrical wheels covered with specified abrasive paper. The number of revolutions of the test specimen required to cause a defined degree of abrasion is measured.
|
Withdrawn |
2006-04 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24338:2014 |
Laminate floor coverings — Determination of abrasion resistance |
ISO 24338:2014 specifies two methods (A and B) for measuring abrasion of laminate floor covering elements. The tests described measure the ability of the surface layer to resist abrasive wear-through.
Abrasion, according to method A, is achieved by rotating a test specimen in contact with a pair of loaded cylindrical wheels covered with specified abrasive paper. The resistance to wear, according to method B, is evaluated by abrading the face of test pieces with a specified abrasive applied by means of two loaded wheels. The number of revolutions of the test specimen required to cause a defined degree of abrasion is measured by both methods.
NOTE The precision of the methods is not known. When inter-laboratory data become available, a precision statement will be added.
|
Withdrawn |
2014-12 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24338:2022 |
Laminate floor coverings — Determination of abrasion resistance |
This document specifies two methods (A and B) for measuring abrasion of laminate floor covering elements. The tests described measure the ability of the surface layer to resist abrasive wear-through.
Abrasion according to method A is achieved by rotating a test specimen in contact with a pair of loaded cylindrical wheels covered with specified abrasive paper. The resistance to wear according to method B is evaluated by abrading the face of test pieces with a specified abrasive applied by means of two loaded wheels. The number of revolutions of the test specimen required to cause a defined degree of abrasion is measured by both methods.
NOTE The precision of the methods is not known. When inter-laboratory data become available, a precision statement will be added.
|
Published |
2022-03 |
Edition : 3 |
Number of pages : 19 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24339:2006 |
Laminate and textile floor coverings — Determination of dimensional variations after exposure to humid and dry climate conditions |
ISO 24339:2006 specifies a process to determine the capability of laminate and textile floor coverings to withstand exposure to moderate humid and dry climate conditions. The subclauses pertaining to flatness, openings between elements and height differences between elements only apply to laminated floor coverings.
|
Published |
2006-05 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24340:2006 |
Resilient floor coverings — Determination of thickness of layers |
ISO 24340:2006 describes a method for determining the thickness of different layers of resilient floor coverings.
|
Published |
2006-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24341:2006 |
Resilient and textile floor coverings — Determination of length, width and straightness of sheet |
ISO 24341:2005 specifies methods for determining the length, width and straightness of resilient or textile floor coverings in sheet form.
|
Published |
2006-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24342:2006 |
Resilient floor-covering tiles — Determination of side length, edge straightness and squareness |
ISO 24342:2006 describes methods for determining side lengths, straightness of edges and squareness of resilient floor tiles.
The side lengths, straightness and squareness of resilient floor tile are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This may cause the installed tiles to line up unevenly, producing unsightly seams and corners that do not match.
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24342:2007 |
Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles |
ISO 24342:2007 describes methods for determining side lengths, straightness of edges and squareness of resilient or textile floor tiles.
The side lengths, straightness and squareness of resilient or textile floor tiles are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This may cause the installed tiles to line up unevenly, producing unsightly seams and corners that do not match.
|
Withdrawn |
2007-09 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24342:2007/Amd 1:2012 |
Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles — Amendment 1 |
|
Withdrawn |
2012-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10734:2016 |
Footwear — Test method for slide fasteners — Strength of slide fastener pullers |
ISO 10734:2016 specifies a test method intended to assess the strength of slide fastener pullers for footwear. The method is applicable to all types of footwear slide fastener.
|
Published |
2016-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 24342:2018 |
Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles |
This document describes methods for determining side lengths, straightness of edges and squareness of resilient or textile floor tiles and planks.
The side lengths, straightness and squareness of resilient or textile floor tiles and planks are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This can cause the installed tiles/planks to line up unevenly, producing unsightly seams and corners that do not match.
|
Published |
2018-11 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO/DIS 24342 |
Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles and planks |
adapt the test methods to planks
|
Under development |
|
Edition : 4 |
Number of pages : 12 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-1:2007 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 1: Residual indentation |
ISO 24343-1:2007 describes a method for determining the residual indentation produced in a resilient or laminate floor covering after the application and removal of a constant load.
|
Published |
2007-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-2:2011 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term residual indentation of resilient floor covering |
ISO 24343-2:2011 describes a method for determining the short-term indentation and residual indentation produced in a resilient floor covering after the application and removal of a constant load.
|
Withdrawn |
2011-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-2:2018 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term indentation and residual indentation of resilient floor covering |
This document describes a method for determining the short-term indentation and residual indentation produced in a resilient floor covering after the application and removal of a constant load.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-3:2011 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles |
ISO 24343-3:2011 describes a method for determining the short-term indentation resistance of resilient semi-flexible/vinyl composition tile (VCT) floor covering after the application of constant load.
|
Withdrawn |
2011-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-3:2018 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles |
This document describes a method for determining the short-term indentation resistance of resilient semi-flexible/vinyl composition tile (VCT) floor covering after the application of constant load.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24344:2008 |
Resilient floor coverings — Determination of flexibility and deflection |
ISO 24344:2008 specifies methods for determining the flexibility and deflection of resilient floor coverings.
|
Published |
2008-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24345:2006 |
Resilient floor coverings — Determination of peel resistance |
ISO 24345:2006 describes a method for determining the resistance against separation of two layers of a resilient floor covering by peeling.
|
Published |
2006-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24346:2006 |
Resilient floor coverings — Determination of overall thickness |
ISO 24346:2006 specifies a method for determining the overall thickness of resilient floor coverings.
|
Published |
2006-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 25620:2008 |
Laminate floor coverings — Determination of long-side friction for mechanically assembled panels |
ISO 25620:2008 specifies a method for the determination of the long-side friction of joints between laminate floor panels which are held together on the floor by mechanical locking systems.
|
Published |
2008-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 26985:2008 |
Resilient floor coverings — Identification of linoleum and determination of cement content and ash residue |
ISO 26985:2008 specifies methods for identifying linoleum and determining the cement content and ash residue of linoleum floor coverings.
|
Published |
2008-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 26986:2010 |
Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification |
ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.
|
Published |
2010-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 26986:2010/Amd 1:2022 |
Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification — Amendment 1 |
|
Published |
2022-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 26987:2008 |
Resilient floor coverings — Determination of staining and resistance to chemicals |
ISO 26987:2008 specifies a procedure for the determination of the reaction of resilient floor covering to chemical substances.
|
Published |
2008-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12952-1:1998 |
Textiles — Burning behaviour of bedding items — Part 1: General test methods for the ignitability by a smouldering cigarette |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-1:2010 |
Textiles — Assessment of the ignitability of bedding items — Part 1: Ignition source: smouldering cigarette |
ISO 12952-1:2010 specifies test methods for assessing the ignitability of all bedding items, when subjected to a smouldering cigarette.
ISO 12952-1:2010 applies to bedding items, which can normally be placed on a mattress, for example:
mattress covers;
underlays;
incontinence sheets and pads;
sheets;
blankets;
electric blankets;
quilts (duvets) and covers;
pillows (whatever the filling) and bolsters;
pillowcases.
ISO 12952-1:2010 does not apply to mattresses, bed bases and mattress pads.
|
Published |
2010-10 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-2:1998 |
Textiles — Burning behaviour of bedding items — Part 2: Specific test methods for the ignitability by a smouldering cigarette |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-2:2010 |
Textiles — Assessment of the ignitability of bedding items — Part 2: Ignition source: match-flame equivalent |
ISO 12952-2:2010 specifies tests for assessing the ignitability of all bedding items when subjected to a match-flame equivalent.
ISO 12952-2:2010 applies to bedding items, which can normally be placed on a mattress, for example:
mattress covers;
underlays;
incontinence sheets and pads;
sheets;
blankets;
electric blankets;
quilts (duvets) and covers;
pillows (whatever the filling) and bolsters;
pillowcases.
ISO 12952-2:2010 does not apply to mattresses, bed bases and mattress pads.
|
Published |
2010-10 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-3:1998 |
Textiles — Burning behaviour of bedding items — Part 3: General test methods fot the ignitability by a small open flame |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-4:1998 |
Textiles — Burning behaviour of bedding items — Part 4: Specific test methods for the ignitability by a small open flame |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 3799:1976 |
Textile machinery and accessories — Hydraulic lubricating fittings for textile machinery |
|
Withdrawn |
1976-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
59.120
Textile machinery
|
| ISO 2816:1973 |
Fundamental characteristics of a system of shoe sizing to be known as Mondopoint |
|
Withdrawn |
1973-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
61.060
Footwear
|
| ISO 3355:1975 |
Shoe sizes — System of length grading (for use in the Mondopoint system) |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
61.060
Footwear
|
| ISO/TR 3836:1978 |
Shoe sizes — System of width grading (for use in the Mondopoint system) |
|
Withdrawn |
1978-02 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
61.060
Footwear
|
| ISO 3910:1983 |
Rubber boots, unlined moulded |
Lays down the requirements for general purpose products, manufactured in one piece. Two figures show the details of the boot and the test piece, respectively. 4 tables give the minimum thicknesses, tensile strength and elongation at break before and after ageing and the flexing test limits. The method of testing resistance to flexing is described in an annex. - Replaces the first edition (ISO 3910-1976).
|
Withdrawn |
1983-05 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 5403-1:2011 | IULTCS/IUP 10-1 |
Leather — Determination of water resistance of flexible leather — Part 1: Repeated linear compression (penetrometer) |
ISO 5403-1:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated linear compression. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear applications.
|
Published |
2011-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
61.060
Footwear
;
59.140.30
Leather and furs
|
| ISO 5403-2:2011 | IULTCS/IUP 10-2 |
Leather — Determination of water resistance of flexible leather — Part 2: Repeated angular compression (Maeser) |
ISO 5403-2:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated angular compression. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear applications. It uses a Maeser-type machine and includes an option for electronic detection.
|
Published |
2011-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
;
59.140.30
Leather and furs
|
| ISO 5403:2002 | IULTCS/IUP 10 |
Leather — Physical and mechanical tests — Determination of water resistance of flexible leather |
ISO 5403:2002 specifies a method for determining the dynamic water resistance of leather. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear uppers.
|
Withdrawn |
2002-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
61.060
Footwear
;
59.140.30
Leather and furs
|
| ISO 6907:1984 |
Rubber footwear — Vulcanized resin rubber and vulcanized hard rubber soling materials — Specification |
|
Withdrawn |
1984-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 6907:1994 |
Rubber footwear — Vulcanized resin rubber and vulcanized high-hardness rubber soling materials — Specification |
Cancels and replaces the first edition (1984). Lays down requirements for two grades of resin rubber and high-hardness rubber soling materials, for soling without a heavy pattern, for use on footwear: grade 1 - men's, boys' and girls' footwear; grade 2 - women's footwear, footwear for light use, such as indoor footwear, including slippers.
|
Withdrawn |
1994-11 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 9407:1991 |
Shoe sizes — Mondopoint system of sizing and marking |
Specifies the method of size marking for shoes and applies to all types of shoe, without restriction. This first edition cancels and replaces ISO 2816, ISO 3355, and ISO 3844.
|
Withdrawn |
1991-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
61.060
Footwear
|
| ISO 9407:2019 |
Footwear sizing — Mondopoint system of sizing and marking |
This document specifies a method of designation and marking of footwear size called Mondopoint, based on defined measurements of the foot that the footwear is intended to fit.
This document is applicable to all types of footwear.
|
Published |
2019-06 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 9986:1990 |
Composition cork for shoe outsoles |
Specifies requirements for test methods for composition cork for the manufacture of outsoles of shoes and boots.
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
61.060
Footwear
;
79.100
Cork and cork products
|
| ISO 9986:2014 |
Composition cork for shoe outsoles |
ISO 9986:2014 specifies requirements for test methods as regards composition cork for the manufacture of outsoles of shoes and boots.
|
Withdrawn |
2014-09 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
;
79.100
Cork and cork products
|
| ISO 10335:1990 |
Rubber and plastics footwear — Nomenclature |
Gives 51 definitions of terms used in the rubber and plastics footwear industry, in English, French, and Russian. Order is alphabetic in English, no index in other languages.
|
Withdrawn |
1990-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
;
01.040.61
Clothing industry (Vocabularies)
|
| ISO 10717:2010 |
Footwear — Test method for slide fasteners — Burst strength |
ISO 10717:2010 specifies a test method intended to assess the burst strength of a closed slide fastener for footwear. The method is applicable to all types of slide fastener.
|
Published |
2010-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|