| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/TR 16178:2012 |
Footwear — Critical substances potentially present in footwear and footwear components |
This Technical Report establishes a list of critical chemical substances potentially present in footwear and footwear components.
This Technical Report describes the critical chemical substances, their potential risks, the materials in which they can be found and the test method(s) which can be used to quantify them. It does not include requirements; it is the responsibility of the user of this Technical Report to fix his/her level of acceptance, for instance using a defined concentration or detection limit or quantification limit.
NOTE The proposed test methods indicate the state of the art. Some substances do not include a test method, as no test method is available at the time of publication of this Technical Report. If possible, it is intended to include a test method in a revision of this Technical Report.
This Technical Report applies to any kind of footwear and footwear components.
|
Withdrawn |
2012-07 |
Edition : 2 |
Number of pages : 41 |
Technical Committee |
61.060
Footwear
|
| ISO/TR 16178:2021 |
Footwear — Critical substances potentially present in footwear and footwear components — Lists of critical chemical substances |
This document defines lists of critical chemical substances potentially present in footwear and footwear components.
This document describes the critical chemical substances, their potential risks of nocuousness, in which materials they could be found, and which test method(s) can be used to quantify them.
The test methods listed indicate the state of the art. For some substances, a test method is not available.
This document is applicable to any kind of footwear and footwear components.
|
Published |
2021-09 |
Edition : 3 |
Number of pages : 49 |
Technical Committee |
61.060
Footwear
|
| ISO/TS 16179:2012 |
Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials |
ISO/TS 16179:2012 specifies a test method for determining the presence of organotin compounds. This test method is applicable to all types of footwear materials.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
61.060
Footwear
|
| ISO 16181-1:2021 |
Footwear — Critical substances potentially present in footwear and footwear components — Part 1: Determination of phthalate with solvent extraction |
This document specifies a test method to determine the qualitative and quantitative presence of phthalate compounds (see Annex A) in footwear and footwear components.
NOTE 1 A list of relevant materials potentially containing phthalates can be found in ISO/TR 16178:2012, Annex A or in CEN/TR 16417.
NOTE 2 This test method can also be used to determine phthalates other than those listed in Annex A, subject to validation.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
61.060
Footwear
|
| ISO 16181-2:2021 |
Footwear — Critical substances potentially present in footwear and footwear components — Part 2: Determination of phthalate without solvent extraction |
This document specifies a method for the determination of the content of specific phthalates (see Annex A) by pyrolyzer/thermal desorption gas chromatography-mass spectrometry (Py/TD-GC-MS). This document is applicable to all types of footwear materials except textiles.
NOTE See also CEN/TR 16417 for a list of the specific phthalates to which this document applies.
|
Published |
2021-06 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
61.060
Footwear
|
| ISO/TS 16181:2011 |
Footwear — Critical substances potentially present in footwear and footwear components — Determination of phthalates in footwear materials |
ISO/TS 16181:2011 specifies a test method to determine the presence of phthalate compounds. This test method is applicable to all types of footwear materials.
|
Withdrawn |
2011-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
61.060
Footwear
|
| ISO 16186:2021 |
Footwear — Critical substances potentially present in footwear and footwear components — Determination of dimethyl fumarate (DMFU) |
This document specifies a method for the determination of the content of dimethyl fumarate (DMFU) by gas chromatograph with single quadrupole mass spectrometer (GC-MS) or tandem quadrupole mass spectrometer (GC-MS/MS).
This document is applicable to all types of footwear and footwear components except metal parts.
|
Published |
2021-05 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
61.060
Footwear
|
| ISO/TS 16186:2012 |
Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials |
ISO/TS 16186:2012 gives a test method for determining the amounts of dimethyl fumarate (DMFU) in footwear materials, dessicant sachets and other commodities. The test method is not applicable to metal parts.
|
Withdrawn |
2012-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
61.060
Footwear
|
| ISO 16187:2013 |
Footwear and footwear components — Test method to assess antibacterial activity |
ISO 16187:2013 specifies quantitative test methods to evaluate the antibacterial activity of footwear and components.
It is applicable to all types of footwear and components employing non-diffusing antibacterial treatments.
|
Published |
2013-08 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
61.060
Footwear
|
| ISO/TS 16189:2013 |
Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine dimethylformamide in footwear materials |
ISO/TS 16189:2013 specifies a method to determine the amounts of dimethylformamide (DMFo) in footwear and footwear components containing polyurethane (PU) coated material.
|
Withdrawn |
2013-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 16189:2021 |
Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine dimethylformamide in footwear materials |
This document specifies a method to determine the amounts of dimethylformamide (DMF) in footwear and footwear components containing polyurethane (PU) coated material.
NOTE 1 In the footwear industry, when PU is injected (reaction moulded), this process does not require the use of DMF. For PU coated material, the use of DMF is possible.
NOTE 2 Several abbreviations can be used for dimethylformamide DMF, DMFa, DMFo. This document uses DMF.
ISO/TR 16178:2021, Table 1 defines which materials are concerned by this determination.
|
Published |
2021-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 16190:2021 |
Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials |
This document specifies a method to determine the amounts of polycyclic aromatic hydrocarbons (PAHs) in footwear and footwear components.
NOTE A list of relevant materials can be found in ISO/TR 16178:2021, Table 1[3].
|
Published |
2021-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
61.060
Footwear
|
| ISO/TS 16190:2013 |
Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials |
ISO/TS 16190:2013 specifies a method to determine the amounts of polycyclic aromatic hydrocarbons (PAH) in footwear and footwear components.
|
Withdrawn |
2013-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 17693:2004 |
Footwear — Test methods for uppers — Resistance to damage on lasting |
ISO 17693:2004 specifies a test method to determine the lastability of uppers or complete upper assemblies, irrespective of the material used, in order to assess suitability for end use.
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 17694:2003 |
Footwear — Test methods for uppers and lining — Flex resistance |
ISO 17694:2003 specifies a test method for determining the flex resistance of uppers and linings irrespective of the material, in order to assess the suitability for the end use.
|
Withdrawn |
2003-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 17694:2016 |
Footwear — Test methods for uppers and lining — Flex resistance |
ISO 17694:2016 specifies a test method for determining the flex resistance of uppers and linings irrespective of the material in order to assess the suitability for the end use.
|
Published |
2016-05 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 17696:2004 |
Footwear — Test methods for uppers, linings and insocks — Tear strength |
ISO 17696:2004 specifies a test method for assessing the tear strength of uppers, linings and insocks or complete upper assemblies, irrespective of material, in order to assess suitability for end use.
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 17697:2003 |
Footwear — Test methods for uppers, lining and insocks — Seam strength |
ISO 17697:2003 specifies two test methods for determining the seam strength of uppers, lining or insocks, irrespective of the material, in order to assess the suitability for the end use.
These methods are:
Method A: Needle perforations - for determining the force required to pull a row of needles through an upper material, in a direction perpendicular to the row.
Method B: Stitched seams - for determining the breaking strength of stitched seams in shoe upper and lining materials. This method is applicable to seams cut from shoes or made up to simulate footwear constructions.
|
Withdrawn |
2003-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
61.060
Footwear
|
| ISO 17697:2016 |
Footwear — Test methods for uppers, lining and insocks — Seam strength |
ISO 17697:2016 specifies two test methods for determining the seam strength of uppers, lining or insocks, irrespective of the material, in order to assess the suitability for the end use.
These methods are as follows.
- Method A: Needle perforations. For determining the force required to pull a row of needles through an upper material, in a direction perpendicular to the row.
- Method B: Stitched seams. For determining the breaking strength of stitched seams in shoe upper and lining materials. This method is applicable to seams cut from shoes or made up to simulate footwear constructions.
|
Published |
2016-05 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
61.060
Footwear
|
| ISO 17698:2003 |
Footwear — Test methods for uppers — Delamination resistance |
ISO 17698:2003 specifies a test method for determining the delamination resistance of uppers irrespective of the material, in order to assess the suitability for the end use.
|
Withdrawn |
2003-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
61.060
Footwear
|
| ISO 17698:2016 |
Footwear — Test methods for uppers — Delamination resistance |
ISO 17698:2016 specifies a test method for determining the delamination resistance of uppers made from coated material, in order to assess the suitability for the end use.
|
Published |
2016-05 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
61.060
Footwear
|
| ISO 17699:2003 |
Footwear — Test methods for uppers and lining — Water vapour permeability and absorption |
ISO 17699:2003 specifies two test methods for assessing, respectively, the water vapour permeability and the water vapour absorption of uppers or complete upper assembly irrespective of the material, in order to assess the suitability for the end use.
|
Published |
2003-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
61.060
Footwear
|
| ISO 17700:2004 |
Footwear — Test methods for uppers, linings and insocks — Colour fastness to rubbing |
ISO 17700:2004 specifies two test methods for assessing the degree of damage (marring) and transfer of a material's surface colour during mild dry or wet abrasion. The methods are applicable to all footwear uppers, linings and insocks irrespective of the material, in order to assess suitability for end use.
ISO 17700:2004 also specifies a method for determining the likelihood of colour bleeding from materials and components such as sewing threads and shoe laces due to the action of water and artificial perspiration solutions, in order to assess suitability for end use.
|
Withdrawn |
2004-10 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
61.060
Footwear
|
| ISO 17700:2019 |
Footwear — Test methods for upper components and insocks — Colour fastness to rubbing and bleeding |
This document specifies three test methods (method A, method B and method C) for assessing the degree of transfer of a material's surface colour during dry or wet rubbing and a method (method D) for determining the likelihood of colour bleeding.
The methods are applicable to all footwear uppers, linings and insocks, irrespective of the material. Method D is also applicable to sewing threads and shoelaces.
The methods are:
— method A: to-and-fro square rubbing finger fastness testing machine;
— method B: rotative rub fastness testing machine;
— method C: to-and-fro circular rubbing finger fastness testing machine;
— method D: colour fastness to bleeding.
|
Published |
2019-07 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
61.060
Footwear
|
| ISO 17701:2003 |
Footwear — Test methods for uppers, lining and insocks — Colour migration |
ISO 17701:2003 specifies a test method for determining the propensity of a material to cause discolouration of another material when stored in close contact. This method is applicable to all materials which are used in intimate contact, and to adhesives which are used to bond them.
|
Withdrawn |
2003-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 17701:2016 |
Footwear — Test methods for uppers, lining and insocks — Colour migration |
ISO 17701:2016 discolouration of another material when stored in close contact. This method is applicable to all materials which are used in intimate contact to adhesives which are used to bond them.
|
Published |
2016-05 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 17702:2003 |
Footwear — Test methods for uppers — Water resistance |
ISO 17702:2003 specifies a test method for determining the resistance of footwear upper material to water penetration on flexing, in order to assess the suitability for the end use.
|
Published |
2003-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
61.060
Footwear
|
| ISO 17703:2003 |
Footwear — Test methods for uppers — High temperature behaviour |
ISO 17703:2003 specifies a test method for determining the effect of heat on the tensile strength of uppers or complete upper assemblies irrespective of the material, in order to assess the suitability for the end use.
|
Published |
2003-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 17704:2004 |
Footwear — Test methods for uppers, linings and insocks — Abrasion resistance |
ISO 17704:2004 specifies a test method for determining the resistance of uppers, linings and insocks, irrespective of the material, to wet and dry abrasion, in order to assess the suitability for the end use.
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
61.060
Footwear
|
| ISO 17705:2003 |
Footwear — Test methods for uppers, lining and insocks — Thermal insulation |
ISO 17705:2003 specifies a test method for determining the thermal conductivity of uppers, lining and insocks irrespective of the material, in order to assess the suitability for the end use.
|
Published |
2003-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 17706:2003 |
Footwear — Test methods for uppers — Tensile strength and elongation |
ISO 17706:2003 specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material, in order to asses the suitability for the end use.
|
Published |
2003-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 17707:2005 |
Footwear — Test methods for outsoles — Flex resistance |
ISO 17707:2005 specifies a method for determining the flex resistance of outsoles. This method is intended to assess the effect of sole materials and surface patterns on cut growth. This method is applied to outsoles that have a maximum longitudinal rigidity of 30 N.
|
Published |
2005-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
61.060
Footwear
|
| ISO 17708:2003 |
Footwear — Test methods for whole shoe — Upper sole adhesion |
ISO 17708:2003 describes a test method for the determination of the resistance to separation of the upper from the outsole or the resistance to separation of adjacent layers of the outsole or resistance to tear failure of the upper or the sole. It also defines conditions of ageing that can be used for production control.
It applies to all types of footwear (produced by cementing, vulcanization, injection moulding, etc.) for which evaluation of adhesion of the sole to the upper is needed and where the upper is continuously assembled (closed shoes).
|
Withdrawn |
2003-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
61.060
Footwear
|
| ISO 17708:2018 |
Footwear — Test methods for whole shoe — Upper sole adhesion |
This document describes a test method for determining the resistance to separation of the upper from the outsole, for separating adjacent layers of the outsole or for causing tear failure of the upper or the sole. It also defines conditions of ageing that can be used for production control.
This document is applicable to all types of footwear (cementing, vulcanisation, injection moulding, etc.) where the evaluation of sole adhesion on the upper is needed and where the upper is continuously assembled (closed shoe).
NOTE 1 In all cases the objective is to test the bond strength nearest to the edge of the assembly.
NOTE 2 The test need not be carried out when the bond has been made by grindery (using, for example, nails or screws) or stitching
|
Published |
2018-06 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
61.060
Footwear
|
| ISO 17709:2004 |
Footwear — Sampling location, preparation and duration of conditioning of samples and test pieces |
ISO 17709:2004 specifies the sampling location, preparation and duration of conditioning of samples and test pieces for footwear components and footwear, to carry out the test methods needed to determine the suitable properties for the end use.
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
61.060
Footwear
|
| ISO 18403:2016 |
Footwear — Test methods for slide fasteners — Resistance to damage during closure under a lateral force |
ISO 18403:2016 specifies a test method intended to determine the maximum lateral force applied to a slide fastener for footwear under which it will close without failure. The method is applicable to all types of slide fastener.
|
Published |
2016-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 18454:2001 |
Footwear — Standard atmospheres for conditioning and testing of footwear and components for footwear |
|
Withdrawn |
2001-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
61.060
Footwear
|
| ISO 20866:2001 |
Footwear — Test methods for insoles — Delamination resistance |
ISO 20866 specifies a test method for the determination of the delamination resistance of insoles, irrespective of the material.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 18454:2018 |
Footwear — Standard atmospheres for conditioning and testing of footwear and components for footwear |
ISO 18454:2018 specifies the general conditioning and testing atmospheres for the evaluation of footwear and footwear component properties.
ISO 18454:2018 defines two standard atmospheres for conditioning and testing of footwear and footwear components.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
61.060
Footwear
|
| ISO 18895:2006 |
Footwear — Test methods for shanks — Fatigue resistance |
ISO 18895:2006 specifies a test method for assessing the fatigue resistance of steel shanks of at least 100 mm in length used for the reinforcement of the waist region of women's shoes and of some men's and children's shoes.
|
Published |
2006-04 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 18896:2006 |
Footwear — Test methods for shanks — Longitudinal stiffness |
ISO 18896:2006 specifies a method for assessing the stiffness in the longitudinal direction of steel shanks used for the reinforcement of the waist region of women's shoes and of some men's and children's shoes.
|
Withdrawn |
2006-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 18896:2018 |
Footwear — Test methods for shanks — Longitudinal stiffness |
ISO 18896:2018 specifies a method for assessing the stiffness in the longitudinal direction of steel shanks used for the reinforcement of the waist region of women's shoes and of some men's and children's shoes.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
61.060
Footwear
|
| ISO/FDIS 19407 |
Footwear — Sizing — Conversion of sizing systems |
ISO/TS 19407:2015 comprises three shoe size conversion tables covering the major shoe sizing systems (Mondopoint, European and United Kingdom, as well as China, Japan and United States). The tables are based on measurement of foot length, this being the logical starting point for any shoe size marking system. The tables contain the following information:
Table 1 ? Adults' technical shoe size conversion;
Table 2 ? Adults' recommended shoe size marking (simplified);
Table 3 ? Children's size conversion.
|
Under development |
|
Edition : 1 |
Number of pages : 8 |
Technical Committee |
61.060
Footwear
|
| ISO/TS 19407:2015 |
Footwear — Sizing — Conversion of sizing systems |
ISO/TS 19407:2015 comprises three shoe size conversion tables covering the major shoe sizing systems (Mondopoint, European and United Kingdom, as well as China, Japan and United States). The tables are based on measurement of foot length, this being the logical starting point for any shoe size marking system. The tables contain the following information:
Table 1 ? Adults' technical shoe size conversion;
Table 2 ? Adults' recommended shoe size marking (simplified);
Table 3 ? Children's size conversion.
|
Published |
2015-02 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
61.060
Footwear
|
| ISO 19408:2023 |
Footwear — Sizing — Vocabulary |
ISO/TS 19408:2015 defines terms commonly used for measuring feet and lasts and for determining the size of footwear.
This vocabulary complements ISO 19952, Footwear ? Vocabulary.
The term "shoe" means all types of footwear.
|
Published |
2023-04 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
61.060
Footwear
;
01.040.61
Clothing industry (Vocabularies)
|
| ISO/TS 19408:2015 |
Footwear — Sizing — Vocabulary and terminology |
ISO/TS 19408:2015 defines terms commonly used for measuring feet and lasts and for determining the size of footwear.
This vocabulary complements ISO 19952, Footwear ? Vocabulary.
The term "shoe" means all types of footwear.
|
Withdrawn |
2015-02 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
61.060
Footwear
;
01.040.61
Clothing industry (Vocabularies)
|
| ISO 19409:2022 |
Footwear — Sizing — Measurement of last dimensions |
This document specifies methods to measure the basic last dimensions. Last dimensions can be measured physically using a real last or virtually on a digital 3D model using suitable software to make equivalent measurements.
These test methods are applicable to all types of lasts.
NOTE The specified last dimensions do not necessarily correspond with anatomical foot positions and foot dimensions.
|
Published |
2022-11 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
61.060
Footwear
|
| ISO 19410-1:2022 |
Footwear sizing — In-shoe measurement — Part 1: Shoe length |
This document specifies a method for measuring the effective shoe length to accommodate the foot.
This document is not applicable to heel and toe open shoes (example: sandals).
|
Published |
2022-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 19574:2022 |
Footwear and footwear components — Qualitative test method to assess antifungal activity (growth test) |
This document specifies a test method (growth test) for the qualitative evaluation of the antifungal activity of footwear and footwear components exposed to the action of filamentous micro-fungi.
This document is only applicable to footwear and components that claim to have antifungal (antimycotic) or antimicrobial treatment effects.
|
Published |
2022-01 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
61.060
Footwear
|
| ISO 19577:2019 |
Footwear — Critical substances potentially present in footwear and footwear components — Determination of Nitrosamines |
This document specifies a method for the determination of the content of 12 kinds of Nitrosamines (see Annex A) in footwear and footwear components by using solvent extraction and Gas chromatography with mass selective detector (GC-MS).
This document is applicable to rubber in footwear materials.
NOTE ISO/TR 16178 defines which materials are concerned by this
|
Published |
2019-11 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
61.060
Footwear
|
| ISO 19952:2005 |
Footwear — Vocabulary |
ISO 19952:2005 defines terms used in the footwear industry, in English, French, Spanish and Italian. The terms and their definitions are listed alphabetically in English.
In the annexes, all the terms are listed alphabetically in English, French, Spanish and Italian, so that the user of this International Standard can easily find the corresponding definition and the equivalent terms in the different languages.
ISO 19952:2005 is intended to facilitate communication in the footwear sector.
|
Published |
2005-06 |
Edition : 1 |
Number of pages : 84 |
Technical Committee |
61.060
Footwear
;
01.040.61
Clothing industry (Vocabularies)
|
| ISO/CD 19952 |
Footwear — Vocabulary |
This document defines terms used in the footwear industry. This document is intended to facilitate communication in the footwear sector.
|
Under development |
|
Edition : 2 |
|
Technical Committee |
61.060
Footwear
;
01.040.61
Clothing industry (Vocabularies)
|
| ISO 19953:2004 |
Footwear — Test methods for heels — Resistance to lateral impact |
ISO 19953:2004 specifies a test method for determining the impact strength of the heels of ladies' shoes.
The result provides an assessment of the liability to failure under the occasional heavy blows received during wear.
While the test method is applicable to all types of high heels, of whatever construction, it is particularly useful for injection-moulded plastic heels which incorporate a steel dowel re-inforcement, giving information on the suitability of the dowel's hardness or softness. Heels which by virtue of their shape have a high lateral impact resistance do not normally required to be tested in this way.
|
Published |
2004-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 19954:2003 |
Footwear — Test methods for whole shoe — Washability in a domestic washing machine |
ISO 19954:2003 specifies a test method for the evaluation of the behaviour of footwear when subjected to domestic washing. The evaluation is based upon the modification of some characteristics measured before and after washing.
ISO 19954:2003 specifies a method of domestic washing adapted to all types of footwear.
|
Published |
2003-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
61.060
Footwear
|
| ISO 19956:2004 |
Footwear — Test methods for heels — Fatigue resistance |
ISO 19956:2004 specifies a test method for determining the ability of heels of ladies' shoes to withstand the repeated small impacts imposed by normal walking. Although intended primarily for plastic heels, the procedure is also usable for testing steel heel dowels on their own.
While the test method is applicable to all types of high heels of any construction, it is particularly useful for injection-moulded plastic heels that incorporate a steel dowel reinforcement.
|
Published |
2004-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 19957:2004 |
Footwear — Test methods for heels — Heel pin holding strength |
ISO 19957:2004 specifies a test method for measuring the force required to pull a single heel pin out of a heel. This test method can be used to measure the heel pin holding strength of heel materials by using a standard heel pin and a method of insertion, or it can be used to assess the heel nailing in commercial production.
This test method is applicable to testing plastic heels and wooden heels for women's footwear. Heels composed of layers of fibreboard or leather and low plastic heels for men's footwear cannot be tested by this method.
|
Withdrawn |
2004-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 19957:2004/Cor 1:2005 |
Footwear — Test methods for heels — Heel pin holding strength — Technical Corrigendum 1 |
|
Withdrawn |
2005-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
61.060
Footwear
|
| ISO 19957:2021 |
Footwear — Test methods for heels — Heel pin holding strength |
This document specifies a test method for measuring the force required to pull a single heel pin out of a heel. This test method is used both to measure the heel pin holding strength of heel materials by using a standard heel pin and a method of insertion, and to assess the heel nailing of commercial production.
This test method is applicable to testing plastics and wooden heels for women’s footwear. Heels composed of layers of fibreboard or leather and low plastics heels for men’s footwear cannot be tested by this method.
|
Published |
2021-09 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
61.060
Footwear
|
| ISO 20866:2018 |
Footwear — Test methods for insoles — Delamination resistance |
ISO 20866:2018 specifies a test method for the determination of the delamination resistance of insoles, irrespective of the material.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 19958:2004 |
Footwear — Test methods for heels and top pieces — Top piece retention strength |
ISO 19958:2003 specifies a test method for measuring the force required to detach the top piece from the underside of the shoe heel. The test is applicable to heels with the top piece already attached which have been removed from complete shoes, to heels alone with the top piece attached and, in some instances, to heels with separate push-in top pieces. All heels, except reinforced slender heels with top pieces attached by steel spigots and built stacked heels, can be tested by this method.
|
Published |
2004-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 20150:2019 |
Footwear and footwear components — Quantitative challenge test method to assess antifungal activity |
This document specifies quantitative challenge test methods for evaluating the antifungal activity of footwear and footwear components.
This document is applicable only to footwear and components that claim to have antifungal (antimycotic) properties or antimicrobial properties.
Two methods can be applied. The choice of method depends on the material properties and test microorganisms. Dynamic challenge test method can be applied to all types of materials. For single absorbent materials, static challenge test method is recommended. Brief descriptions of each method are given in 11.2 and 11.3.
|
Published |
2019-01 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
61.060
Footwear
|
| ISO 20535:2019 |
Footwear — Test method for insoles and insocks — Dimensional change after cycle of wetting and drying |
This document specifies a method for determining the dimensional change of footwear insoles and insocks after cycle wetting and drying regardless of the material.
|
Published |
2019-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 20536:2017 |
Footwear — Critical substances potentially present in footwear and footwear components — Determination of phenol in footwear materials |
ISO 20536:2017 specifies a method to determine the amount of phenol in footwear and footwear components. It is applicable to all parts of footwear except for metal parts.
NOTE ISO/TR 16178:2012, Table 1 defines which materials are included in this determination.
|
Published |
2017-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
61.060
Footwear
|
| ISO/TR 20572:2007 |
Footwear — Performance requirements for components for footwear — Accessories |
ISO/TR 20572:2007 establishes the performance requirements for accessories (laces and eyelets, metal components and touch and close fasteners) for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This Technical Report applies to accessories (laces and eyelets, metal components and touch and close fasteners) for various kinds of footwear.
ISO/TR 20572:2007 is intended to be used as a reference between the manufacturer and the supplier.
|
Published |
2007-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
61.060
Footwear
|
| ISO/CD TR 20572 |
Footwear — Performance requirements for components for footwear — Accessories |
|
Deleted |
|
Edition : 2 |
|
Technical Committee |
61.060
Footwear
|
| ISO/TR 20573:2006 |
Footwear — Performance requirements for components for footwear — Heels and top pieces |
ISO/TR 20573:2006 establishes the performance requirements for heel and top piece components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose.
It also establishes the test methods used to evaluate the compliance with the requirements.
ISO/TR 20573:2006 applies to heel and top piece for all kind of footwear.
ISO/TR 20573:2006 is intended to be used as a reference between the manufacturer and the supplier. It is not intended for third party certification of finished footwear intended for the consumer.
|
Published |
2006-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
61.060
Footwear
|
| ISO 20863:2004 |
Footwear — Test methods for stiffeners and toepuffs — Bondability |
ISO 20863:2004 specifies a method for the determination of the bondability of heat activated and solvent activated stiffeners and toepuffs to upper and lining materials.
|
Withdrawn |
2004-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 20863:2018 |
Footwear — Test methods for stiffeners and toepuffs — Bondability |
ISO 20863:2018 specifies a method for the determination of the bondability of heat activated and solvent activated stiffeners and toepuffs to upper and lining materials.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 20864:2004 |
Footwear — Test methods for stiffeners and toepuffs — Mechanical characteristics |
ISO 20864:2004 specifies three methods for determining the shape retention properties and compression strength of a domed test specimen. These methods are the following and they are applicable to footwear toepuff and stiffener:
method 1: applicable to heat activated materials
method 2: applicable to solvent activated materials
method 3: applicable to non-thermoplastic fibreboard
|
Published |
2004-12 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
61.060
Footwear
|
| ISO 8782-4:1998 |
Safety, protective and occupational footwear for professional use — Part 4: Specification for occupational footwear |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.340.50
Leg and foot protection
|
| ISO 20867:2001 |
Footwear — Test methods for insoles — Heel pin holding strength |
ISO 20867 specifies a method of determining the ability of an insole component to hold a heel pin and to prevent its head from being pulled through the insole component.
The method is applicable to insoles used in the seat of footwear with inside attached heels, and also to seat components where outside heel attachments are used and the heel pin is clenched.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 20867:2018 |
Footwear — Test methods for insoles — Heel pin holding strength |
ISO 20867:2018 specifies a method to determine the ability of an insole component to hold a heel pin and to prevent its head from being pulled through the insole component.
The method is applicable to insoles used in the seat of footwear with inside attached heels, and also to seat components where outside heel attachments are used and the heel pin is clenched.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 20868:2001 |
Footwear — Test methods for insoles — Abrasion resistance |
ISO 20868 specifies a test method for the determination of the abrasion resistance of insoles, irrespective of the material.
|
Published |
2001-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 20869:2001 |
Footwear — Test methods for outsoles, insoles, lining and insocks — Water soluble content |
ISO 20869 specifies a method for the determination of the water soluble contents for outsoles, insoles, lining and insocks.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 20869:2010 |
Footwear — Test method for outsoles, insoles, linings and insocks — Water soluble content |
ISO 20869:2010 specifies a method for the determination of the water soluble contents for outsoles, insoles, lining and insocks.
|
Published |
2010-05 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
61.060
Footwear
|
| ISO 20870:2001 |
Footwear — Ageing conditioning |
ISO 20870 specifies laboratory procedures which are intended to imitate the effects of naturally-occurring reactions. The physical properties of interest are measured before and after the application of the specified treatments.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 20870:2017 |
Footwear — Ageing conditioning |
ISO 20870:2017 specifies laboratory procedures which are intended to imitate the effects of naturally occurring reactions. The physical properties of interest are measured before and after the application of the specified treatments. The effect of the ageing procedures on any of the physical properties of the material can be examined.
|
Published |
2017-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
61.060
Footwear
|
| ISO 20871:2001 |
Footwear — Test methods for outsoles — Abrasion resistance |
ISO 20871 specifies a method for the determination of the abrasion resistance for outsoles, irrespective of the material.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
61.060
Footwear
|
| ISO 20871:2018 |
Footwear — Test methods for outsoles — Abrasion resistance |
ISO 20871:2018 specifies a method for the determination of the abrasion resistance for outsoles, irrespective of the material.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
61.060
Footwear
|
| ISO 20872:2001 |
Footwear — Test methods for outsoles — Tear strength |
ISO 20872 specifies a method for the determination of the tear strength of outsoles, irrespective of the material, using trouser test pieces.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
61.060
Footwear
|
| ISO 20872:2018 |
Footwear — Test methods for outsoles — Tear strength |
ISO 20872:2018 specifies a method for the determination of the tear strength of outsoles, irrespective of the material, using trouser test pieces.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 20873:2001 |
Footwear — Test methods for outsoles — Dimensional stability |
ISO 20873 specifies a method for the determination of the linear shrinkage after heating of test specimens prepared from outsoles.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 20873:2018 |
Footwear — Test methods for outsoles — Dimensional stability |
ISO 20873:2018 specifies a method for determining the linear shrinkage after heating of test specimens prepared from outsoles.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 8782-5:2000 |
Safety, protective and occupational footwear for professional use — Part 5: Additional requirements and test methods |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.340.50
Leg and foot protection
|
| ISO 20874:2001 |
Footwear — Test methods for outsoles — Needle tear strength |
ISO 20874 specifies a method for the determination of the needle tear strength for outsoles, irrespective of the material.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 20874:2018 |
Footwear — Test methods for outsoles — Needle tear strength |
ISO 20874:2018 specifies a method for the determination of the needle tear strength for outsoles, irrespective of the material.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 20875:2001 |
Footwear — Test methods for outsoles — Determination of split tear strength and delamination resistance |
ISO 20875 specifies a method for the determination of the split tear strength and delamination resistance for outsoles.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
61.060
Footwear
|
| ISO 20875:2018 |
Footwear — Test methods for outsoles — Determination of split tear strength and delamination resistance |
ISO 20875:2018 specifies a method for the determination of the split tear strength and delamination resistance for outsoles.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 20876:2001 |
Footwear — Test methods for insoles — Resistance to stitch tear |
ISO 20876 describes a method of evaluating the ability of an insole, irrespective of the material, to hold stitches or to take clenched metal fastenings. The method has become accepted as a general quality criterion for insole materials even where attachment is by means of adhesives.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 20876:2018 |
Footwear — Test methods for insoles — Resistance to stitch tear |
ISO 20876:2018 describes a method for evaluating the ability of an insole, irrespective of the material, to hold stitches, or to take clenched metal fastenings. The method has become accepted as a general quality criterion for insole materials even where attachment is by means of adhesives.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
61.060
Footwear
|
| ISO 20877:2001 |
Footwear — Test methods for whole shoe — Thermal insulation |
ISO 20877 describes a method of measuring footwear insulation against cold.
It applies to all types of closed footwear.
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
|
| ISO 20877:2011 |
Footwear — Test methods for whole shoe — Thermal insulation |
ISO 20877:2011 specifies a method for measuring insulation of footwear against heat or cold, in order to provide information for assessing footwear comfort.
ISO 20877:2011 is applicable to all types of closed footwear or boots, except footwear used as personal protective equipment.
|
Published |
2011-09 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
61.060
Footwear
|
| ISO/TR 20879:2007 |
Footwear — Performance requirements for components for footwear — Uppers |
ISO/TR 20879:2007 establishes the performance requirements for uppers component for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This Technical Report applies to uppers for various kinds of footwear.
ISO/TR 20879:2007 is intended to be used as a reference between the footwear manufacturer and the supplier. It is not intended for third party certification of finished shoes destined for the consumer.
|
Published |
2007-02 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
61.060
Footwear
|
| ISO/CD TR 20879 |
Footwear — Performance requirements for components for footwear — Uppers |
|
Deleted |
|
Edition : 2 |
|
Technical Committee |
61.060
Footwear
|
| ISO/TR 20880:2007 |
Footwear — Performance requirements for components for footwear — Outsoles |
ISO/TR 20880:2007 establishes the performance requirements for outsoles components for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This Technical Report applies to outsoles for various kinds of footwear.
ISO/TR 20880:2007 is intended to be used as a reference between the footwear manufacturer and the supplier. It is not intended for third party certification of finished shoes destined for the consumer.
|
Published |
2007-02 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
61.060
Footwear
|
| ISO/CD TR 20880 |
Footwear — Performance requirements for components for footwear — Outsoles |
|
Deleted |
|
Edition : 2 |
|
Technical Committee |
61.060
Footwear
|
| ISO 8782-6:2000 |
Safety, protective and occupational footwear for professional use — Part 6: Additional specifications for safety footwear |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.340.50
Leg and foot protection
|
| ISO/TR 20881:2007 |
Footwear — Performance requirements for components for footwear — Insoles |
ISO/TR 20881:2007 establishes the performance requirements for insoles components for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This Technical Report applies to insoles for various kinds of footwear.
ISO/TR 20881:2007 is intended to be used as a reference between the manufacturer and the supplier. It is not intended for third party certification.
|
Published |
2007-02 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
61.060
Footwear
|
| ISO/CD TR 20881 |
Footwear — Performance requirements for components for footwear — Insoles |
|
Deleted |
|
Edition : 2 |
|
Technical Committee |
61.060
Footwear
|
| ISO/TR 20882:2007 |
Footwear — Performance requirements for components for footwear — Lining and insocks |
ISO/TR 20882:2007 establishes the performance requirements for lining and insock components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This Technical Report applies to lining and insocks for various kinds of footwear.
ISO/TR 20882:2007 is intended to be used as a reference between the manufacturer and the supplier. It is not intended for third party certification.
|
Published |
2007-02 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
61.060
Footwear
|