| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 1530:1973 |
Fishing nets — Description and designation of knotted netting |
Describes the principal characteristics of cited product and comprises the items of information to be furnished when ordering the netting. It is intended to facilitate the exchange of information between purchasers and suppliers of this product. - Replaces ISO Recommendation R 1530-1970.
|
Withdrawn |
1973-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1530:2003 |
Fishing nets — Description and designation of knotted netting |
ISO 1530:2003 specifies the principal characteristics of knotted netting for fishing nets, and specifies the items of information to be furnished when ordering the netting. It is intended to facilitate the exchange of information between purchasers and suppliers of knotted netting for fishing nets.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1531:1973 |
Fishing nets — Hanging of netting — Basic terms and definitions |
Describes and defines the principal terms "mounting", "hanging", "length of rope", "length of netting" and "hanging ratio E" and gives an example. - Replaces ISO Recommendation R 1531-1970.
|
Published |
1973-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
65.150
Fishing and fish breeding
;
01.040.65
Agriculture (Vocabularies)
|
| ISO 1532:1973 |
Fishing nets — Cutting knotted netting to shape ("tapering") |
Depending on the desired final shape of netting, tapering cuts must be made in suitable ways. The various cutting rates are obtained by combining different lengths of cuts. Examples of tapering are given in the annex. - Replaces ISO Recommendation R 1532-1970.
|
Published |
1973-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1805:1973 |
Fishing nets — Determination of breaking load and knot breaking load of netting yarns |
The tests may be carried out in both the dry and wet states but tests in wet state on the knotted yarn are considered to be particularly appropriate in indicating the behaviour of the yarn in use. A length of yarn is extended in the dry or wet state until it reaches the load at rupture. The test is performed using a suitable apparatus that records or indicates the applied load. - Replaces ISO Recommendation R 1805-1970.
|
Withdrawn |
1973-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1805:2006 |
Fishing nets — Determination of breaking force and knot breaking force of netting yarns |
ISO 1805:2006 specifies a method of testing the breaking force and knot breaking force of netting yarns for fishing nets.
Tests may be carried out in both the dry and wet states, but tests in the wet state on the knotted yarn are considered to be particularly appropriate in indicating the behaviour of the yarn in use.
|
Published |
2006-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1806:1973 |
Fishing nets — Determination of mesh breaking load of netting |
The tests may be carried out in both the dry and wet states but tests in wet state are considered to be particularly appropriate in indicating the behaviour of the netting in use. A mesh is extended in the dry or wet state until one of the knots or joints reaches the load at rupture. The test is performed using a suitable apparatus that records or indicates the applied load. - Replaces ISO Recommendation R 1806-1970.
|
Withdrawn |
1973-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 1806:2002 |
Fishing nets — Determination of mesh breaking force of netting |
ISO 1806:2002 specifies a method of determining the mesh-breaking force of netting for fishing.
Tests may be carried out in both the dry and wet states, but tests in the wet state are considered to be particularly appropriate in indicating the behaviour of the netting in use.
|
Published |
2002-12 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 2075:1972 |
Cutting netting to shape — Determination of the cutting rate |
Depending on the desired final shape of netting, tapering cuts must be made in suitable ways. The various cutting rates are obtained by combining different lengths of cuts. Examples of tapering are included in an annex. The main cutting rates complemented by illustrations are described.
|
Withdrawn |
1972-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 3090:1974 |
Ropes and cordage — Netting yarns — Determination of change in length after immersion in water |
Immersion in water, at a given temperature, of a length of netting yarn on which two marks have been made at a prescribed distance apart. Measurement of the change in length between the two marks. Apparatus for determining the change in length is described by means of a figure.
|
Withdrawn |
1974-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.150
Fishing and fish breeding
;
59.080.50
Ropes
|
| ISO 3660:1976 |
Fishing nets — Mounting and joining of netting — Terms and illustrations |
The common methods of mounting and joining of netting for fishing are listed and brief descriptions of the methods together with corresponding diagrams are given. Each method is identified by a number.
|
Published |
1976-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
65.150
Fishing and fish breeding
;
01.040.65
Agriculture (Vocabularies)
|
| ISO 3790:1976 |
Fishing nets — Determination of elongation of netting yarns |
Tests may be carried out in both the dry and wet states but tests in the wet state are considered to be particularly appropriate in indicating the behaviour of the yarn in use. Any of the following types of tensile testing machines may be used: constant rate of elongations machine; constant rate of traverse machine. Preference should be given to constant rate of elongation machines.
|
Published |
1976-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 5020:2022 |
Waste reduction and treatment on fishing vessels |
This document specifies a system for waste reduction and treatment on fishing vessels. It includes principles, management plans, methods and requirements.
This document is applicable to both marine and inland fisheries.
|
Published |
2022-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 4874:2000 |
Tobacco — Sampling of batches of raw material — General principles |
|
Withdrawn |
2000-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 12878:2012 |
Environmental monitoring of the impacts from marine finfish farms on soft bottom |
This International Standard establishes an approach for sampling and empirical measurement of soft-bottom
impacts from marine finfish net pen farms, and gives examples of detailed procedures for how environmental
impacts from finfish net pen farm sites can be monitored in the field, including guidelines for quality assurance
of sampling protocols and safety. The emphasis of the environmental impact in this International Standard is
on eutrophication effects on the seabed.
This International Standard identifies ecological objectives, the indicators used, and the methodology and
design, and encompasses guidelines for quality assurance of sampling protocols and operational safety.
|
Published |
2012-07 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 16663-1:2003 |
Fishing nets — Method of test for the determination of mesh size — Part 1: Opening of mesh |
ISO 16663-1:2003 specifies a method for the determination of size of opening of the mesh of fishing nets using a flat wedge gauge. It is applicable to active fishing gears.
|
Withdrawn |
2003-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 16663-1:2009 |
Fishing nets — Method of test for the determination of mesh size — Part 1: Opening of mesh |
ISO 16663-1:2009 specifies a method for the determination of the size of the mesh opening of fishing nets, using an objective mesh gauge. It is applicable to active and passive fishing gear.
|
Published |
2009-03 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 16663-2:2003 |
Fishing nets — Method of test for the determination of mesh size — Part 2: Length of mesh |
ISO 16663-2:2003 specifies a method for the determination of mesh length of fishing nets using a ruler. It is applicable to passive fishing gears.
|
Published |
2003-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO 16663-2:2003/Cor 1:2005 |
Fishing nets — Method of test for the determination of mesh size — Part 2: Length of mesh — Technical Corrigendum 1 |
|
Published |
2005-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
65.150
Fishing and fish breeding
|
| ISO/FDIS 4789 |
Guidelines for wastewater treatment and reuse in thermal power plants |
|
Under development |
|
Edition : 1 |
Number of pages : 29 |
Technical Committee |
13.030.20
Liquid wastes. Sludge
;
13.030.50
Recycling
;
13.060.25
Water for industrial use
|
| ISO 5667-7:1993 |
Water quality — Sampling — Part 7: Guidance on sampling of water and steam in boiler plants |
Recommends procedures and equipment for sampling water and steam in boiler plants including examples of sampling apparatus, to provide samples for physical and chemical analysis that are representative of the main body of water or steam from which they are taken. The procedures for sampling apply to raw water, make-up water, boiler feed water, condensate, boiler water, cooling water. Does not apply to the sampling of water and steam in nuclear power plants.
|
Published |
1993-11 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.060.25
Water for industrial use
;
13.060.45
Examination of water in general
|
| ISO 22449-1:2020 |
Use of reclaimed water in industrial cooling systems — Part 1: Technical guidelines |
This document defines terms related to industrial cooling water systems and specifies technical guidelines for the use of reclaimed water for make-up water purposes water in industrial cooling systems. It provides a basic framework for consideration in the design and operation of industrial cooling systems using reclaimed water. The aim of the document is to promote and to help the implementation of the use of reclaimed water in industrial cooling systems.
It provides:
— Terms and definitions;
— Technical guidelines for the use of reclaimed water in industrial cooling systems.
This document is applicable to cooling systems that are considered to work as auxiliary systems for the normal operation of an industrial process. However, the operation of a cooling system in relation to process safety is not covered in this document. In addition, some environmental concerns also need to be taken into consideration, for example the drift control or the use of some persistent biocides. This document can be used to encourage consistency within any organization engaged in the use of reclaimed water.
|
Published |
2020-01 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.060.25
Water for industrial use
|
| ISO 16741:2015 |
Traceability of crustacean products — Specifications on the information to be recorded in farmed crustacean distribution chains |
ISO 16741:2015 specifies the information to be recorded in farmed crustacean supply chains in order to establish the traceability of products originating from farm raised crustaceans. It specifies how farmed crustacean products traded are to be identified and the information to be generated and held on those products by each of the food businesses that physically trade them through the distribution chains. It is specific to the distribution for human consumption of crustacean and their products, from farm through to retailers or caterers.
The types of business identified in ISO 16741:2015 for farmed crustacean distribution chains are the following:
a) farming
1) broodstock collection
2) hatcheries and nurseries
3) crustacean farm
4) harvesting;
b) processors;
c) traders and wholesalers;
d) retailers and caterers;
e) logistics including materials brought from other domains;
f) feed production.
|
Published |
2015-09 |
Edition : 1 |
Number of pages : 33 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 22449-2:2020 |
Use of reclaimed water in industrial cooling systems — Part 2: Guidelines for cost analysis |
This document provides guidelines for cost analysis of the use of reclaimed water in industrial cooling systems.
This document is intended for new-built industrial cooling systems using reclaimed water as make-up water, in which the reclaimed water originates from industrial wastewater and is generated through wastewater treatment systems for reuse. The source of industrial wastewater is from all the production plants inside the enterprise.
In this document, the levelized cost of cooling water (LCOCW) is used to compare and determine which industrial cooling system is more expensive per-kilowatt-hour heat removed.
Use of reclaimed water will have a direct impact on the operating cost of cooling systems and the environment. External benefits, including positive externalities and negative externalities, are provided in Annex A, which considers environmental, social and financial elements.
This document is intended for all types of stakeholders involved in reclaimed water use in new-built industrial cooling systems.
This document aims to ensure consistency within any organization engaged in reclaimed water reuse.
This document provides a broad framework within which costs for new-built industrial cooling systems using reclaimed water can be assessed. The currency used is local currency (LCY).
|
Published |
2020-05 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.060.25
Water for industrial use
|
| ISO 22524:2020 |
Pilot plan for industrial wastewater treatment facilities in the objective of water reuse |
This document provides the fundamental principles and guidelines for industrial wastewater treatment technology pilot studies.
It does not address laboratory research and development, study or testing of a given technology. It does not cover reuse applications or operations, such as irrigation.
This document applies to a wide range of industrial water treatment systems for the purposes of reuse.
|
Published |
2020-05 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
13.060.25
Water for industrial use
|
| ISO 12875:2011 |
Traceability of finfish products — Specification on the information to be recorded in captured finfish distribution chains |
ISO 12875:2011 specifies the information to be recorded in marine-captured finfish supply chains in order to establish the traceability of products originating from captured finfish. It specifies how traded fishery products are to be identified, and the information to be generated and held on those products by each of the food businesses that physically trade them through the distribution chains. It is specific to the distribution for human consumption of marine-captured finfish and their products, from catch through to retailers or caterers.
|
Published |
2011-09 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 12877:2011 |
Traceability of finfish products — Specification on the information to be recorded in farmed finfish distribution chains |
ISO 12877:2011 specifies the information to be recorded in farmed finfish supply chains in order to establish the traceability of products originating from farmed finfish. It specifies how traded fishery products are to be identified, and the information to be generated and held on those products by each of the food businesses that physically trade them through the distribution chains. It is specific to the distribution for human consumption of farmed finfish and their products, from finfish meal, breeding and finfish farming through to retailers or caterers.
|
Published |
2011-08 |
Edition : 1 |
Number of pages : 41 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 16488:2015 |
Marine finfish farms — Open net cage — Design and operation |
ISO 16488:2015 presents a general method to be followed for the systematic analysis, design, and evaluation of net cage marine finfish farms. One common style of a net cage finfish farm is shown in Figure 1. A mooring system holds together a series of net cages which contain finfish. Water from the outside environment freely passes through the nets, providing the necessary environment for farming finfish. The methodology presented in this International Standard allows for determination of the adequacy of a given finfish farm's floating structure, nets, and mooring equipment for a given environment. The standard addresses specification of a design basis through evaluation of environmental conditions and acceptable risk, and specifies acceptable techniques for the design and analysis of finfish farms. This International Standard also provides guidelines for development of a handbook which documents procedures for correct maintenance and operation of the finfish farm.
The application of the standard is intended to reduce the risk of escape from marine finfish farms. This International Standard is designed to be used by the operator of a net cage marine finfish farm. It is intended that through application of this International Standard that increased human safety and system integrity levels can be achieved.
|
Published |
2015-07 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 16541:2015 |
Methods for sea lice surveillance on marine finfish farms |
ISO 16541:2015 specifies both a method for sea lice counts on marine finfish farms and a method for sea lice surveillance that can be carried out in any farming area to provide consistent estimates of sea lice infestation.
It specifies the best practices associated with monitoring sea lice levels on marine finfish farms for various purposes including the assessment of abundance, prevalence, and treatment efficacy. This will include identifying minimum requirements for specific monitoring program elements (e.g. number of fish and cages to be sampled, frequency of sampling, the level of detail recorded, etc.). It will apply to all marine finfish farms which experience infestation with any of the range of "sea lice" (copepodid) parasites.
|
Published |
2015-07 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 2817:1974 |
Tobacco and tobacco products — Determination of silica content |
|
Withdrawn |
1974-03 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO/DIS 17174 |
Molecular biomarker analysis — DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments |
This document describes a procedure for the identification of single fish and fish fillets to the
level of genus or species.
The identification of fish species is carried out by PCR amplification of either a segment of the
mitochondrial cytochrome b gene (cytb) [1] or the cytochrome c oxidase I gene (cox1, syn COI)
[2], [3] or both, followed by sequencing of the PCR products and subsequent sequence
comparison with entries in databases [4], [5]. The methodology allows the identification of a large
number of commercially important fish species.
The decision whether the cytb or cox1 gene segment or both are used for fish identification
depends on the declared fish species, the applicability of the PCR method for the fish species
and the availability of comparative sequences in the public databases.
This method has been successfully validated on raw fish fillets, however, laboratory experience
is available that it can also be applied to processed, e.g. cold smoked, hot smoked, salted,
frozen, cooked, fried, deep fried
samples.
This document is usually unsuitable for the analysis of highly processed foods, e.g. tins of fish,
with highly degraded DNA where the fragment lengths are not sufficient for amplification of the
targets. Furthermore, it is not applicable for complex fish products containing mixtures of two or
more fish species.
|
Under development |
|
Edition : 1 |
Number of pages : 19 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 18537:2015 |
Traceability of crustacean products — Specifications on the information to be recorded in captured crustacean distribution chains |
ISO 18537:2015 specifies the information to be recorded in wild-caught crustacean supply chains in order to establish the traceability of products originating from wild-caught crustacean. It specifies how crustacean products traded are to be identified and the information to be generated and held on those products by each of the food businesses that physically trade them through the distribution chains. It is specific to the distribution for human consumption of crustacean and their products, from wild-caught through to retailers or caterers.
The types of businesses identified in this International Standard for wild-caught crustacean distribution chains are:
- capture operators;
- landing businesses and first sale;
- processors;
- transporters and store operators;
- traders and wholesalers;
- retailers and caterers;
- logistics including materials brought from other domains.
Any given crustacean distribution chain may be made up of some or all of the above components but not necessarily in the sequence listed.
|
Published |
2015-10 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 18538:2015 |
Traceability of molluscan products — Specifications on the information to be recorded in farmed molluscan distribution chains |
ISO 18538:2015 specifies the information to be recorded in farmed molluscs supply chains (excluding cephalopods) in order to establish the traceability of products originating from farm-raised molluscs. It specifies how molluscan products traded are to be identified and the information to be generated and held on those products by each of the food businesses that physically trade them through the distribution chains. It is specific to the distribution for human consumption of molluscs and their products from farm through to retailers or caterers.
|
Published |
2015-08 |
Edition : 1 |
Number of pages : 38 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 18539:2015 |
Traceability of molluscan products — Specifications on the information to be recorded in captured molluscan distribution chains |
ISO 18539:2015 specifies the information to be recorded in wild-caught molluscs supply chains in order to establish the traceability of products originating from wild-caught molluscs. It specifies how molluscan products traded are to be identified and the information to be generated and held on those products by each of the food businesses that physically trade them through the distribution chains. It is specific to the distribution for human consumption of molluscs and their products, from wild caught through to retailers or caterers.
The types of businesses identified in ISO 18539:2015 for wild-caught molluscan distribution chains are the following:
? capture;
? landing business and first sale;
? depuration and shucking, etc.;
? processors;
? transporters and store operators;
? traders and wholesalers;
? retailers and caterers;
? logistics including materials brought from other domains.
Any given molluscan distribution chain can be made up of some or all of the above components but not necessarily in the sequence listed.
|
Published |
2015-09 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 22948:2020 |
Carbon footprint for seafood — Product category rules (CFP–PCR) for finfish |
This document specifies requirements for calculating the carbon footprint specific to finfish product category rules (CFP?PCR). This methodology builds on the requirements of International Standards for life cycle assessment (LCA) and products' carbon footprints.
This document is applicable to the calculation and communication of finfish products' carbon footprints from fishing and/or cultivation of feed ingredients to the consumption of finfish products. It is applicable to the carbon footprints of products from both fisheries and aquaculture value chains.
This document used alone does not apply to specifying a product's overall environmental or sustainability characteristics.
|
Published |
2020-12 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 23855:2021 |
Frozen surimi — Specification |
This document specifies the requirements for frozen surimi and the test methods for its quality control. It also specifies the requirements of packaging, marking, storage and transportation.
This document is applicable to tropical and cold-water surimi.
|
Published |
2021-09 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
67.120.30
Fish and fishery products
|
| ISO 2881:1992 |
Tobacco and tobacco products — Determination of alkaloid content — Spectrometric method |
Specifies a reference method for the determination of alkaloids, expressed as nicotine. The method is applicable to unmanufactured tobacco, manufactured tobacco and tobacco products. It is based on submission of the sample to steam distillation, spectrometric measurement of the absorption of the distillate and calculation of the percentage content of nicotine.
|
Published |
1992-09 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 2965:1979 |
Material used as cigarette papers — Determination of air permeability |
|
Withdrawn |
1979-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 2965:1997 |
Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone — Determination of air permeability |
|
Withdrawn |
1997-12 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 2965:2009 |
Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Determination of air permeability |
ISO 2965:2009 specifies a method for the determination of air permeability (AP).
It is applicable to materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone or discrete permeable zones where the measured permeability is in excess of 10 cm3 . (min-1 . cm-2) at 1 kPa. In addition, it is applicable to banded cigarette papers, with bands no narrower than 4 mm.
|
Withdrawn |
2009-05 |
Edition : 3 |
Number of pages : 27 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 2965:2019 |
Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Determination of air permeability |
This document specifies a method for the determination of air permeability (AP).
It is applicable to materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone or discrete permeable zones where the measured permeability is in excess of 10 cm3·(min−1·cm−2) at 1 kPa. In addition, it is applicable to banded cigarette papers, with bands of a width of at least 4 mm.
NOTE For an estimate of the air permeability of materials outside the scope of this document, see Note 3 in 5.1.2 and 7.6.1.4.
|
Published |
2019-08 |
Edition : 4 |
Number of pages : 27 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 2971:1976 |
Tobacco and tobacco products — Cigarettes and filters — Determination of nominal diameter |
|
Withdrawn |
1976-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 2971:1987 |
Cigarettes and filters — Determination of nominal diameter — Pneumatic method |
|
Withdrawn |
1987-08 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 2971:1998 |
Cigarettes and filter rods — Determination of nominal diameter — Method using a laser beam measuring apparatus |
|
Withdrawn |
1998-07 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 2971:2013 |
Cigarettes and filter rods — Determination of nominal diameter — Method using a non-contact optical measuring apparatus |
ISO 2971:2013 specifies a non contact, optical method of gauging for determination of the mean, minimum and maximum diameters and the ovality (or roundness) of rod-shaped objects with a nominally circular or oval cross section that is convex curvilinear. The method is applicable, in particular, to cigarettes and filter rods.
|
Published |
2013-04 |
Edition : 4 |
Number of pages : 18 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3308:1977 |
Tobacco and tobacco products — Routine analytical cigarette-smoking machine — Definitions, standard conditions and auxiliary equipment |
|
Withdrawn |
1977-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3308:1986 |
Cigarettes — Routine analytical cigarette-smoking machine — Definitions and standard conditions |
|
Withdrawn |
1986-12 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3308:1991 |
Routine analytical cigarette-smoking machine — Definitions and standard conditions |
|
Withdrawn |
1991-10 |
Edition : 3 |
Number of pages : 19 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3308:2000 |
Routine analytical cigarette-smoking machine — Definitions and standard conditions |
|
Withdrawn |
2000-04 |
Edition : 4 |
Number of pages : 23 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3308:2012 |
Routine analytical cigarette-smoking machine — Definitions and standard conditions |
ISO 3308:2012:
defines smoking parameters and specifies the standard conditions to be provided for the routine analytical machine smoking of cigarettes;
specifies the requirements for a routine analytical smoking machine complying with the standard conditions.
Annex A specifies the ambient air velocities surrounding cigarettes in a routine analytical smoking machine, the mechanical design of the enclosures immediately surrounding them, and the methods of air velocity measurement including the location where air velocity is measured.
Annex B describes, as an example, the special characteristics of a typical smoking machine incorporating a piston type of puffing mechanism.
Annex C includes a diagram of a puff profile and illustrates definitions and standard conditions.
|
Published |
2012-10 |
Edition : 5 |
Number of pages : 25 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3400:1976 |
Tobacco and tobacco products — Determination of alkaloids in cigarette smoke condensates — Spectrophotometric method |
|
Withdrawn |
1976-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3400:1989 |
Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method |
|
Withdrawn |
1989-06 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3400:1997 |
Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method |
|
Published |
1997-04 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3400:1997/Amd 1:2009 |
Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method — Amendment 1 |
|
Published |
2009-10 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3401:1977 |
Tobacco and tobacco products — Determination of alkaloid retention by filters of cigarettes |
|
Withdrawn |
1977-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3401:1991 |
Cigarettes — Determination of alkaloid retention by the filters — Spectrometric method |
Specifies a direct and a indirect method. Describes the principle, the reagents, the apparatus, the sampling, the test procedures, the expression of results, and the contents of the test report. This second edition cancels and replaces the first edition (1977).
|
Published |
1991-12 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3402:1978 |
Tobacco and tobacco products — Atmospheres for conditioning and testing |
|
Withdrawn |
1978-09 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3402:1991 |
Tobacco and tobacco products — Atmosphere for conditioning and testing |
|
Withdrawn |
1991-07 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3402:1999 |
Tobacco and tobacco products — Atmosphere for conditioning and testing |
|
Withdrawn |
1999-12 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3402:2023 |
Tobacco and tobacco products — Atmosphere for conditioning and testing |
This document specifies the atmosphere for the conditioning and testing of samples of tobacco and tobacco products.
It is primarily applicable to cigarettes; however, if not specified differently in other ISO standards, it can also be applied to tobacco, other tobacco products, and materials used in the manufacture of tobacco products for which prior conditioning is necessary. Standards for the conditioning and testing of other forms of tobacco, tobacco products, and materials can refer to all or part of this document.
|
Published |
2023-01 |
Edition : 5 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3406:1975 |
Tobacco and tobacco products — Expression of analytical test results |
|
Withdrawn |
1975-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3550-1:1997 |
Cigarettes — Determination of loss of tobacco from the ends — Part 1: Method using a rotating cylindrical cage |
|
Published |
1997-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3550-2:1997 |
Cigarettes — Determination of loss of tobacco from the ends — Part 2: Method using a rotating cubic box (sismelatophore) |
|
Published |
1997-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO/TS 3550-3:2015 |
Cigarettes — Determination of loss of tobacco from the ends — Part 3: Method using a vibro-bench |
ISO/TS 3550-3:2015 specifies a method for the determination of loss of tobacco from cigarette ends using a vibro-bench.
This method applies to the determination of loss of tobacco from cigarette ends in manufacturing site, throughout the distribution network and also while in the smoker's pocket.
NOTE Two other methods for the determination of loss of tobacco from the ends, using a rotating cylindrical cage and a cubic rotating box (sismelatophore), are described in ISO 3550‑1 and ISO 3550‑2, respectively.
|
Published |
2015-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3550:1975 |
Tobacco and tobacco products — Cigarettes — Determination of loss of tobacco from the ends |
|
Withdrawn |
1975-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3550:1985 |
Cigarettes — Determination of loss of tobacco from the ends |
|
Withdrawn |
1985-05 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 3612:1977 |
Tobacco and tobacco products — Cigarettes — Determination of rate of free combustion |
|
Withdrawn |
1977-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4387:1987 |
Cigarettes — Determination of total and dry particulate matter using a routine analytical cigarette-smoking machine — Glass fibre filter smoke trap method |
|
Withdrawn |
1987-04 |
Edition : 1 |
|
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4387:1991 |
Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine |
|
Withdrawn |
1991-10 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4387:2000 |
Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine |
|
Withdrawn |
2000-04 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4387:2000/Amd 1:2008 |
Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine — Amendment 1 |
|
Withdrawn |
2008-09 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4387:2000/Amd 2:2017 |
Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine — Amendment 2 |
|
Withdrawn |
2017-11 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4387:2019 |
Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine |
This document specifies methods for the determination of total particulate matter and for the subsequent determination of nicotine-free dry particulate matter present in the smoke from cigarettes generated and collected using a routine analytical smoking machine.
|
Published |
2019-09 |
Edition : 4 |
Number of pages : 19 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4388:1977 |
Tobacco and tobacco products — Determination of retention of coloured part of smoke condensate by cigarette filters — Direct spectrophotometric method |
|
Withdrawn |
1977-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4388:1991 |
Cigarettes — Determination of the smoke condensate retention index of a filter — Direct spectrometric method |
Specifies an empirical, quick and practical method which relates only to smoke condensate. The results should not be interpreted with respect to any particular constituent of the smoke condensate.
|
Published |
1991-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4389:1981 |
Tobacco and tobacco products — Determination of organochlorine pesticide residues (Reference method) |
|
Withdrawn |
1981-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4389:1997 |
Tobacco — Determination of organochlorine pesticide residues — Gas chromatographic method |
|
Withdrawn |
1997-12 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4389:1997/Cor 1:1998 |
Tobacco — Determination of organochlorine pesticide residues — Gas chromatographic method — Technical Corrigendum 1 |
|
Withdrawn |
1998-09 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4874:2020 |
Tobacco — Sampling of batches of raw material — General principles |
This document specifies the general principles to be applied when sampling batches of raw tobacco in order to assess either
— the mean value of one or more of its characteristics, or
— the heterogeneity of one or more of its characteristics.
Manufactured tobacco products, including products intended for sale or distribution, are specifically not included in the scope of this document.
This document is applicable to the sampling of batches of raw tobacco of the following types:
a) leaf tobacco:
flue cured;
air cured;
sun cured;
fire cured;
b) pretreated raw tobacco:
which has undergone fermentation (in packages not intended for retail or wholesale sales or distribution, in bulk, in chambers);
which has been partially or completely stemmed;
which is in the form of stems;
which is in the form of waste and remnants;
which has been reconstituted in the form of strips.
|
Published |
2020-01 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 4876:1980 |
Tobacco and tobacco products — Determination of maleic hydrazide residues |
This method is also applicable to the residues from maleic hydrazide sucker control agents used on tobacco crops. Annex A describes optional extra procedure such as acid pre-digestion and carbon clean-up, and Annex B includes some notes on the distillation procedure.
|
Published |
1980-04 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO/DIS 5501-1 |
Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 1: Electrically Heated Tobacco Products (eHTPs) |
|
Under development |
|
Edition : 1 |
Number of pages : 9 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO/DIS 5501-2 |
Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 2: Aerosol Heated Tobacco Products (aHTPs) |
|
Under development |
|
Edition : 1 |
Number of pages : 9 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO/DIS 5501-3 |
Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 3: Carbon Heated Tobacco Products (cHTPs) |
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO/TR 5729:2021 |
Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes |
This document recollects and evaluates physical parameters of filter paper substrates for the determination of ignition propensity of cigarettes according to ISO 12863.
|
Published |
2021-08 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/DIS 6080 |
Tobacco heating systems — Terms and definitions |
This document defines the heated tobacco products (HTP) category; defines the HTP sub-categories and the attributes of each; defines standardized terminology and definitions for the HTP. This document does not include the sub-categories of waterpipes or loose-leaf tobacco HTP; does not specify the means for aerosol trapping, subsequent sample preparation or analyses of components in the trapped aerosol.
|
Under development |
|
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
;
01.040.65
Agriculture (Vocabularies)
|
| ISO 6466:1983 |
Tobacco and tobacco products — Determination of dithiocarbamate pesticides residues — Molecular absorption spectrometric method |
Covers residues from pesticides of the dithiocarbamate type commonly used on tobacco crops. Describes reagents and apparatus for the spectrometric measurement and gives information on the expression of results and the data to be included in the test report. The distallation apparatus to be used in the test is shown as an annex.
|
Published |
1983-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6488-1:1997 |
Tobacco — Determination of water content — Part 1: Karl Fischer method |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6488:1981 |
Tobacco — Determination of water content (Reference method) |
|
Withdrawn |
1981-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6488:2004 |
Tobacco and tobacco products — Determination of water content — Karl Fischer method |
ISO 6488:2004 specifies a method for the determination of water content by the Karl Fischer method. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable for water contents ranging from a mass fraction of at least 2 % to 55 %.
|
Withdrawn |
2004-02 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6488:2004/Cor 1:2008 |
Tobacco and tobacco products — Determination of water content — Karl Fischer method — Technical Corrigendum 1 |
|
Withdrawn |
2008-06 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6488:2021 |
Tobacco and tobacco products — Determination of water content — Karl Fischer method |
This document specifies a method for the determination of water content by the Karl Fischer method. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable for water contents ranging from a mass fraction of at least 2 % to 55 %.
|
Published |
2021-06 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6565:1983 |
Tobacco and tobacco products — Draw resistance of cigarettes and filter rods — Definitions, standard conditions and general aspects |
|
Withdrawn |
1983-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6565:1999 |
Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement |
|
Withdrawn |
1999-09 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6565:2002 |
Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement |
This International Standard describes a method for the measurement of the draw resistance of cigarettes and pressure drop of filter rods, and specifies the standard conditions applicable to such measurements.
It is applicable to cigarettes, filter rods and, by extension, to cylindrical tobacco products similar to cigarettes.
|
Withdrawn |
2002-04 |
Edition : 3 |
Number of pages : 16 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6565:2011 |
Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement |
ISO 6565:2011 describes a method for the measurement of the draw resistance of cigarettes and pressure drop of filter rods, and specifies the standard conditions applicable to such measurements.
ISO 6565:2011 is applicable to cigarettes, filter rods and, by extension, to cylindrical tobacco products similar to cigarettes.
|
Withdrawn |
2011-10 |
Edition : 4 |
Number of pages : 21 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 6565:2015 |
Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement |
ISO 6565:2015 describes a method for the measurement of the draw resistance of cigarettes and pressure drop of filter rods, and specifies the standard conditions applicable to such measurements.
It is applicable to cigarettes, filter rods, and, by extension, to cylindrical tobacco products similar to cigarettes.
|
Published |
2015-12 |
Edition : 5 |
Number of pages : 20 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 7210:1983 |
Smoking machines for tobacco and tobacco products — Non-routine test methods |
|
Withdrawn |
1983-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 7210:1997 |
Routine analytical cigarette-smoking machine — Additional test methods |
Contains additional test methods for routine analytical cigarette-smoking machines. Intended to check the conformity of these machines with ISO 3308. Replaces the first edition.
|
Withdrawn |
1997-01 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 7210:2013 |
Routine analytical cigarette-smoking machine — Additional test methods for machine verification |
ISO 7210:2013 specifies additional test methods for routine analytical cigarette-smoking machines intended to check the conformity of these machines with Clause 4 of ISO 3308.
|
Withdrawn |
2013-01 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|
| ISO 7210:2018 |
Routine analytical cigarette-smoking machine — Additional test methods for machine verification |
This document specifies additional test methods for routine analytical cigarette-smoking machines intended to check the conformity of these machines with ISO 3308 and ISO 20778.
It only establishes additional test methods for smoking machines and does not deal with actual smoking, which is described in other International Standards.
It is composed of four sections relating to
— the determination of pressure drop (Clause 4);
— the determination of significant puff profile parameters (Clause 5);
— the verification of restricted smoking (Clause 6);
— the description of the soap film bubble flowmeter for the determination of the puff volume (Clause 7).
NOTE There are more possibilities for determining the aforementioned parameters. Systems giving the same results and accuracies can be used. The certificate of conformity with this standard can be obtained from the machine manufacturer.
|
Published |
2018-10 |
Edition : 4 |
Number of pages : 9 |
Technical Committee |
65.160
Tobacco, tobacco products and related equipment
|