| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4628-8:2012 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
ISO 4628-8:2012 specifies a method for assessing delamination and corrosion around a scribe or other artificial defect on a coated panel or other coated test specimen, caused by a corrosive environment.
ISO 4628-8:2012 does not cover evaluation of pitting corrosion or pit depth.
|
Published |
2012-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-10:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
ISO 4628-10:2003 describes a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of the filaments.
Pictorial examples are provided in an annex to illustrate different ratings for the length of the longest filament L and the most frequent filament length M.
|
Withdrawn |
2003-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-10:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
ISO 4628-10:2016 specifies a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of filaments.
Pictorial examples provided in Annex A of this part of ISO 4628 illustrate different ratings for the length of the longest filament L and the most frequent length M of the filaments. A comparison of the test panels with the 12 pictures in Annex A does not supersede the obligatory numerical assessment (method 1 or 2).
ISO 4628-1 defines a system used for designating the quantity and size of defects and the intensity of uniform changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2016-01 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/DIS 4628-10 |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
ISO 4628-10:2016 specifies a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of filaments.
Pictorial examples provided in Annex A of this part of ISO 4628 illustrate different ratings for the length of the longest filament L and the most frequent length M of the filaments. A comparison of the test panels with the 12 pictures in Annex A does not supersede the obligatory numerical assessment (method 1 or 2).
ISO 4628-1 defines a system used for designating the quantity and size of defects and the intensity of uniform changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Under development |
|
Edition : 3 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TR 5601:2023 |
Paints and varnishes — Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content — Best practices for the selection of test methods |
This document aims to enable users to identify an appropriate method for the determination of volatile organic compounds (VOC) content and/or the semi-volatile organic compounds (SVOC) content of coating materials and their raw materials. This document provides a step-by-step procedure for identifying appropriate tests. This document is intended to be used in conjunction with ISO 11890-1, ISO 11890-2 and ISO 17895, to help users select an appropriate analytical method for their analytical problem.
|
Published |
2023-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TR 5602:2021 |
Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials |
This document describes the main sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials. The sources of error listed here include all process steps from the set-up of the sample with the measuring cell right through to evaluation.
NOTE The sources of error discussed here do not represent a complete list.
|
Published |
2021-11 |
Edition : 1 |
Number of pages : 52 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-1:1998 |
Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-1:2017 |
Paints and varnishes — Determination of resistance to humidity — Part 1: Condensation (single-sided exposure) |
ISO 6270-1:2017 specifies a method for determining the resistance of paint films, paint systems and related products to conditions of condensation in accordance with the requirements of coating or product specifications.
The method is applicable to coatings, both on porous substrates such as wood, plaster and plasterboard and on non-porous substrates such as metal. It provides an indication of the performance likely to be obtained under severe conditions of exposure where continuous condensation occurs on the surface.
The procedure can reveal failures of the coating (including blistering, staining, softening, wrinkling and embrittlement) and deterioration of the substrate.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered by this document.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-2:2005 |
Paints and varnishes — Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres |
ISO 6270-2:2005 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible.
It does not cover the shape and preparation of the test specimens, the duration of the test or the assessment of the test results.
|
Withdrawn |
2005-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-2:2017 |
Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir) |
ISO 6270-2:2017 specifies the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered in this document.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270-3:2018 |
Paints and varnishes — Determination of resistance to humidity — Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir) |
ISO 6270-3:2018 specifies the general conditions and procedures to be observed when testing coated test specimens in constant condensation water atmospheres in order to ensure that the results of tests carried out in different laboratories are reproducible.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered in this document.
|
Published |
2018-01 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6270:1980 |
Paints and varnishes — Determination of resistance to humidity (continuous condensation) |
|
Withdrawn |
1980-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272-1:2002 |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
ISO 6272-1:2002 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions.
The method described can be applied
either as a pass/fail test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification;or as a classification test, to determine the minimum mass and/or drop height for which the coating cracks or peels from its substrate by gradually increasing the drop height and/or the mass.
|
Withdrawn |
2002-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272-1:2011 |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
ISO 6272-1:2011 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions.
NOTE The terms "impact" and "impact resistance" are used in the title and text of ISO 6272-1, but an important characteristic of the apparatus used is that it should produce rapid deformation rather than a true impact.
The method described can be applied
either as a pass/fail test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification;
or as a classification test, to determine, by gradually increasing the drop height and/or the mass, the minimum mass and/or drop height for which the coating cracks or peels from its substrate.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272-2:2002 |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
ISO 6272-2:2002 describes a method for rapidly deforming, by impact with a spherical indenter of diameter 12,7 mm or 15,9 mm, a coating film and its substrate and evaluating the effect of such deformation.
|
Withdrawn |
2002-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272-2:2011 |
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
ISO 6272-2:2011 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, dropped under standard conditions, acting on a small-area spherical indenter.
NOTE The terms "impact" and "impact resistance" are used in the title and text of ISO 6272-2, but an important characteristic of the apparatus used is that it should produce rapid deformation rather than a true impact.
Because of the poor reproducibility of this test method, the method should be restricted to testing in only one laboratory when the results are expressed as numerical values. Interlaboratory agreement is improved when ranking is used in place of numerical values.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6272:1993 |
Paints and varnishes — Falling-weight test |
Specifies a test method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, dropped under standard conditions.
|
Withdrawn |
1993-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TR 6272:1979 |
Paints and varnishes — Falling weight test |
|
Withdrawn |
1979-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6441-1:1999 |
Paints and varnishes — Determination of micro-indentation hardness — Part 1: Knoop hardness by measurement of indentation length |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6441-2:1999 |
Paints and varnishes — Determination of micro-indentation hardness — Part 2: Knoop hardness by measurement of indentation depth under load |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6441:1984 |
Paints and varnishes — Indentation test (spherical or pyramidal) |
The test method is applicable on a single or multi-coat system. The result is expressed as the depth of indentation produced when an indentor of specified or between the interested parties agreed size and shape is applied to the coating under defined conditions. The method is applicable if the identation does not exceed approximately 10 % of the total coating thickness. The indentation apparatus shall be constructed so that the contact load and the test load can successively be applied to an indentor.
|
Withdrawn |
1984-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6503:1984 |
Paints and varnishes — Determination of total lead — Flame atomic absorption spectrometric method |
The method is principle to coating materials having lead contents in the range of about 0,01 % (m/m) to 2 % (m/m), may also be applicable to products with a total lead content of more than 2 % (m/m) when the requirements of precision does not exceed the specified values. two methods are given. The principle of the dry ashing method consists in evaporation of a test portion to dryness and ashing at 475 C and extraction of any lead in the residue with hydrochloric acid; that of the wet oxidation method consists in wet oxidation of a test portion with a mixture of sulfuric acid and hydrogen peroxide or with sulfuric acid and nitric acid and extraction of any lead in the residue with EDTA and ammonia solution.
|
Published |
1984-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-1:1983 |
Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints |
Specifies a method to be used for determining the spreading rate necessary to give a contrast ratio of 98 % of coating materials. The method is restricted to paint films having the tri-stimulus value of Y 70; it is not applicable to fluorescent or metallic paint materials. The principle of the method is based on the Kubelka and Munk equations relating the scattering and absorption coefficients of pigmented films to their colour and opacity. For the determination of hiding power, both the reflectance of a film of thickness, t, on a black background and the reflectivity are required.
|
Withdrawn |
1983-05 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-1:2019 |
Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints |
This document specifies a method for determining the hiding power (spreading rate necessary to give a hiding power of 98 %) of white or light-coloured paints. It is applicable to paint films having the tri-stimulus value of Y ≥ 70 and hiding power > 80 %. It is not applicable to fluorescent or metallic paints.
|
Published |
2019-05 |
Edition : 2 |
Number of pages : 36 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-3:1998 |
Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 23496:2019 |
Determination of pH value — Reference buffer solutions for the calibration of pH measuring equipment |
This document specifies reference buffer solutions for the calibration of pH measuring equipment.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-3:2006 |
Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
ISO 6504-3:2006 describes methods for determining the opacity (by contrast ratio measurement) given by paint films of white or light colours of tristimulus value Y greater than 25, applied at a spreading rate of 20 m2/l to a black and white chart or to colourless transparent polyester foil. In the latter case, the tristimulus value Y is measured subsequently over black and white glass panels.
|
Withdrawn |
2006-02 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6504-3:2019 |
Paints and varnishes — Determination of hiding power — Part 3: Determination of hiding power of paints for masonry, concrete and interior use |
This document specifies methods for determining the hiding power given by paint coats of white or light colours of tristimulus values Y and Y10 greater than 25, applied to a black and white chart, or to a colourless transparent foil. In the latter case the tristimulus values Y and Y10 are measured over black and white panels. Subsequently, the hiding power is calculated from these tristimulus values.
This document also specifies a simple method for calculating the spreading rate for paints with a volatile matter content with low evaporation speed, e.g. coatings for interior walls and ceilings as specified in EN 13300.
|
Published |
2019-11 |
Edition : 3 |
Number of pages : 22 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6713:1980 |
Paints and varnishes — Preparation of acid extracts from liquid paints |
|
Withdrawn |
1980-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6713:1984 |
Paints and varnishes — Preparation of acid extracts from paints in liquid or powder form |
The principle of the method consists in the dilution of a sample with a suitable solvent, separation of the pigment by centrifugation. Three methods, dependent on the binder of the product being examined, are described. Extraction of the separated pigment with hydrochloric acid at a ratio of mass:volume of 1:15, except for the determination of "soluble" lead; in that case, extraction is carried out at a ratio of 1:1000. Evaporation to dryness of the liquid portion obtained by centrifuging, analysis by dry ashing and extraction of the ash with nitric acid. For coating materials in powder form, extraction is carried out without prior separation of the binder.
|
Published |
1984-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6714:1990 |
Paints and varnishes — Preparation of acid extracts from dried paint films |
|
Withdrawn |
1990-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6860:1984 |
Paints and varnishes — Bend test (conical mandrel) |
Is one of four documents which specify empirical test procedures for assessing the resistance of coating films to cracking and/or detachment from the substrate under different conditions of deformation. Describes a test procedure for coating on a metallic substrate when subjected to bending under standard conditions. For a multi-coat system, each coat may be tested separately or the complete system may be tested. The mandrel shall be in the form of a truncated cone. It is mounted horizontally on a base plate. An operating lever with draw bar is provided for bending the test panel. The test panels shall be of burnished steel, burnished tinplate or soft aluminium.
|
Withdrawn |
1984-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 6860:2006 |
Paints and varnishes — Bend test (conical mandrel) |
ISO 6860:2006 describes an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal substrate when subjected to bending around a conical mandrel under standard conditions.
For a multi-coat system, each coat may be tested separately or the complete system may be tested.
|
Published |
2006-03 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/DIS 6923 |
Determination of monomeric diisocyanate content in coating materials and similar products using HPLC-UV |
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7252:1984 |
Paints and varnishes — Determination of total mercury — Flameless atomic absorption spectrometric method |
The reference method described is applicable to products having total mercury contents in the range of about 0.01 % (m/m) to 0.5 % (m/m). May also be extended to products with a total content of more than 0.5 % (m/m). The principle of the method consists in the combustion of the test portion with oxygen in an enclosed system. Reduction of the mercury(II) compounds contained in the resulting solution to elementary mercury. Entrainment of the metal in a gas stream at ambient temperature and determination as the monoatomic vapour by cold vapour atomic absorption spectrometry at a wavelength in the region of 253.7 nm.
|
Published |
1984-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7253:1984 |
Paints and varnishes — Determination of resistance to neutral salt spray |
|
Withdrawn |
1984-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 2834:1999 |
Graphic technology — Test print preparation for offset and letterpress inks |
|
Withdrawn |
1999-10 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 7724-1:1984 |
Paints and varnishes — Colorimetry — Part 1: Principles |
Describes the colorimetric terms and fundamental requirements necessary for determining the colour co-ordinates of paint films. From among the various colour co-ordinates recommended by the CIE, the colour co-ordinates in the CIE 1964 supplementary standard colorimetric system and the colour co-ordinates in the colour space specified in CIE 1976 for measurements on paint films are in accordance with this standard.
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7724-2:1984 |
Paints and varnishes — Colorimetry — Part 2: Colour measurement |
Describes the method for determining the colour co-ordinates of paint films. The method is only application to paint films that appear to be uniformly of one colour (monochromatic), when examined with normal vision. Paint films that do not completely hide a non-transparent substrate may be measured by using this procedure. All the other paint films are outside the scope. The principle consists in measurement of the spectral photometric characteristics (spectral reflectances or spectral reflectance factors) with a spectrophotometer or measurement of the tristimulus values with a tristimulus colorimeter. Calculation of the chromaticity co-ordinates by a table.
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7724-3:1984 |
Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences |
Describes a method for the quantitative colorimetric evaluation of small differences between paint films. The CIE 1976 colour difference formula recommended in 1976 by the CIE has proved to be of practical value and is specified for this application. the principle is based on the calculation of differences in colour, lightness, chroma and hue between the paint films of a test specimen and a reference specimen in the CIE 1976 colour space. If the two methods specified are carried out, comparable results are obtained for high gloss paint films.
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783-1:1996 |
Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films |
|
Withdrawn |
1996-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783-1:1996/Cor 1:1998 |
Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films — Technical Corrigendum 1 |
|
Withdrawn |
1998-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783-2:1999 |
Paints and varnishes — Coating materials and coating systems for exterior masonry and concrete — Part 2: Determination and classification of water-vapour transmission rate (permeability) |
|
Withdrawn |
1999-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783:2011 |
Paints and varnishes — Determination of water-vapour transmission properties — Cup method |
|
Withdrawn |
2011-11 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7783:2018 |
Paints and varnishes — Determination of water-vapour transmission properties — Cup method |
This document specifies a method for determining the water-vapour transmission properties of coatings of paints, varnishes and related products.
It supplements ISO 12572. As far as possible, the procedure, the definitions and the calculations have been taken over from ISO 12572. ISO 12572 can be consulted, if necessary, to obtain a better understanding of the procedure specified in this document.
Water-vapour transmission rates of more than 680 g/(m2⋅d) (i.e. water-vapour diffusion-equivalent air layer thicknesses, sd, of less than 0,03 m) are not accurately quantified by the test method described in this document.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-1:1997 |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Rotating abrasive-paper-covered wheel method |
Deals with the sampling and testing of paints, varnishes and related products. Gives a method for the determination of the resistance to abrasion of a dried coating, using abrasive paper attached to a wheel and abrading rotation.
|
Withdrawn |
1997-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-1:2016 |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen |
ISO 7784-1:2016 specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive-paper covered wheels affect the coating of the rotating test specimens.
|
Withdrawn |
2016-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-1:2023 |
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen |
This document specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive-paper covered wheels affect the coating of the rotating test specimen.
|
Published |
2023-02 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-2:1997 |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Rotating abrasive rubber wheel method |
Deals with the sampling and testing of paints, varnishes and related products. Gives a method for the determination of the resistance to abrasion of a dried coating, using an abrasive rubber wheel and abrading by rotation.
|
Withdrawn |
1997-02 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-2:2016 |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
ISO 7784-2:2016 specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive rubber wheels affect the coating of the rotating test specimen.
|
Withdrawn |
2016-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-2:2023 |
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
This document specifies a method for determining the resistance to abrasion of coatings, for which two loaded, freely rotatable but eccentrically arranged abrasive rubber wheels affect the coating of the rotating test specimen.
|
Published |
2023-02 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-3:2000 |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Reciprocating test panel method |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-3:2016 |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen |
ISO 7784-3:2016 specifies a method for determining the resistance to abrasion of coatings, for which a loaded, rigid abrasive-paper covered wheel affects the coating of the linearly reciprocating test specimen.
|
Withdrawn |
2016-03 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7784-3:2022 |
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen |
This document specifies a method for determining the resistance to abrasion of coatings, for which a loaded, rigid abrasive-paper covered wheel affects the coating of the linearly reciprocating test specimen.
|
Published |
2022-09 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7877:1984 |
Paints and varnishes — Coating of test panels at a specified spreading rate — Brush application |
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-1:1992 |
Coating powders — Part 1: Determination of particle size distribution by sieving |
The method discriminates between particles in the size range from 32 µm to 300 µm using circular test sieves with a sieving area having a diameter of 200 mm. It can also be used as an abbreviated procedure, i.e. for determination of the residue on one single sieve only.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-1:2019 |
Coating powders — Part 1: Determination of particle size distribution by sieving |
This document specifies a method for the determination of the particle size distribution of coating powders by sieve analysis. Particle size distributions with a maximum of less than 100 µm is determined by laser diffraction, ISO 8130‑13. This method is used especially for determining the oversize material or for the presence of contamination and can be used as a quality control procedure ("go"/"no go" test) by checking the amount retained on a single sieve.
The following particle sizes are typical for coating powders, however the particle size can deviate depending on the application:
— thin-film technology: 1 µm to 63 µm;
— electrostatic coating: 10 µm to 200 µm;
— fluidizing-bed method: 100 µm and above.
NOTE Sieves with a mesh size smaller than 32 µm are not practical and are likely to become blind during use.
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-2:1992 |
Coating powders — Part 2: Determination of density by gas comparison pyknometer (referee method) |
The method can be used for all types of coating powder, is simple to carry out, but requires more expensive instrumentation than is often used for density determinations. It is based on the determination of the volume of a weighed test portion by measuring the volume of the gas displaced. This is achieved by equalizing the pressure difference which arises due to the displacement of the gas.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-2:2021 |
Coating powders — Part 2: Determination of density by gas comparison pycnometer (referee method) |
This document specifies a method for the determination of density for all types of coating powders using a gas comparison pycnometer.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-3:1992 |
Coating powders — Part 3: Determination of density by liquid displacement pyknometer |
The method is based on a determination of the mass and the volume of a test portion. The pyknometer (in accordance with ISO 787-10) has to use a liquid that completely wets the product under test without swelling or dissolving it.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-3:2021 |
Coating powders — Part 3: Determination of density by liquid displacement pycnometer |
This document specifies a liquid displacement pycnometer method for the determination of the density of coating powders. The method is based on a determination of the mass and the volume of a test portion.
Coating powders with density <1 g/cm3, can be measured in accordance with ISO 1183-1 and the appropriate method, by agreement.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-4:1992 |
Coating powders — Part 4: Calculation of lower explosion limit |
The lower explosion limit is the minimum concentration of the coating powder in air which will form an explosive mixture. The method is based on the knowledge of the gross calorific value of the product, as determined by the method described in ISO 1928, or on the gross calorific values of the constituents of the product. With powders that are not flammable the method may nevertheless give a value for the lower explosion limit in air.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-4:1992/Cor 1:1993 |
Coating powders — Part 4: Calculation of lower explosion limit — Technical Corrigendum 1 |
In clause 6, replaces in the definition of the symbol B "1,24 × 10^4 J/m^3" by "1,24 × 10^6 J/m^3".
|
Published |
1993-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-4:2021 |
Coating powders — Part 4: Calculation of lower explosion limit |
This document specifies a method for the calculation of the lower explosion limit of a coating powder, i.e. the minimum concentration of the coating powder in air which will form an explosive mixture. It is based on the measurement of the gross calorific value of the product, as determined by the method described in ISO 1928.
|
Published |
2021-12 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-5:1992 |
Coating powders — Part 5: Determination of flow properties of a powder/air mixture |
The method specified reflects commercial practice in powder spraying. Its principle is placing, under draught-free conditions, a specified quantity of coating powder in a vessel and fluidizing it with clean dry air under standard conditions of atmospheric temperature and pressure. The height of the powder during and after fluidization is measured and the rate at which the fluidized powder flows through a specified orifice is then determined. The measurements are used to calculate the fluidization factor and the powder flow rate (flow factor) which together define the transport and spraying characteristics of the powder.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-5:2021 |
Coating powders — Part 5: Determination of flow properties of a powder/air mixture |
This document specifies a method for estimating the flow properties of a mixture of coating powder and air.
The results obtained are influenced by the composition of the coating powder, its density, particle size distribution and particle shape, together with the tendency of the particles to agglomerate and to accept a charge.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-6:1992 |
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature |
The method is based on heating a test portion of a specified volume to a specified temperature, normally 180 °C, in a depression in an electrically heated steel block and determination of the time at which threads can no longer be pulled from the molten product.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-6:1992/Amd 1:1998 |
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature — Amendment 1 |
|
Withdrawn |
1998-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-6:2021 |
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature |
This document specifies a method for determining the time for a thermosetting coating powder to gel at a specified temperature. A method is described for checking batch to batch variation and for the quality control of a given coating powder.
The method is not applicable to coating powders with ultra-short gel times (less than 15 s).
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-7:1992 |
Coating powders — Part 7: Determination of loss of mass on stoving |
The method described is a simple, practical test which provides sufficiently accurate results with coating powders that lose up to about 2 % (m/m). Any water present in the product under test is included in the test result. For any particular application, the test method needs to be completed by supplementary information.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-7:2019 |
Coating powders — Part 7: Determination of loss of mass on stoving |
This document specifies a method for the determination of loss of mass on stoving of coating powders that are to be applied by electrostatic spraying or flock spraying or fluidized bed.
The method described in this document is a simple, practical test which provides sufficiently accurate results for coating powders that lose approximately 2 % (by mass) on stoving (heating). Above 2 %, accuracy decreases with an increasing loss in mass.
This method determines the amount of all volatile matter, including water.
Thermogravimetric testing as described in the ISO 11358 series can be used as a comparative method.
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-8:1994 |
Coating powders — Part 8: Assessment of the storage stability of thermosetting powders |
Deals with the estimation of the storage stability of thermosetting coating powders. Specifies the procedures for determining the changes both in the physical state of a thermosetting coating powder and in the chemical reactivity of the powder, together with its capacity to form a satisfactory final coating. The results of the procedures specified give an indication of the ability of the coating powder to withstand the effects of storage prior to application.
|
Withdrawn |
1994-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-8:2021 |
Coating powders — Part 8: Assessment of the storage stability of thermosetting powders |
This document establishes a method for the estimation of the storage stability of thermosetting coating powders. It provides the procedures for determining the changes both in the physical state of a thermosetting coating powder and in its chemical reactivity, together with its capacity to form a satisfactory final coating.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-9:1992 |
Coating powders — Part 9: Sampling |
Describes methods for the sampling from consignments and for the subdivision of the sample into quantities suitable for undertaking appropriate test methods specified in the other parts of ISO 8130.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-10:1998 |
Coating powders — Part 10: Determination of deposition efficiency |
|
Withdrawn |
1998-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-10:2021 |
Coating powders — Part 10: Determination of deposition efficiency |
This document specifies a method for determining the mass fraction in per cent (%) of a sprayed coating powder which is deposited on a test item under known spray gun and environmental conditions.
The method is applicable to powders applied by corona or tribo charging and can be used to compare the deposition efficiency of different powders with the same or different gun with the same powder.
This method is only used for comparison when powders or guns are evaluated consecutively, as the influence of the environment and the equipment can vary significantly with time and location.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-11:1997 |
Coating powders — Part 11: Inclined-plane flow test |
|
Withdrawn |
1997-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-11:2019 |
Coating powders — Part 11: Inclined-plane flow test |
This document specifies a comparative method for determining the flow characteristic of a fused thermosetting coating powder down a plane inclined at a set angle to the horizontal.
The aim of the test method described in this document gives an indication of the degree of melt flow that can occur during the curing of the coating powder. This characteristic contributes to the surface appearance and to the degree of coverage over sharp edges.
The test is a comparative method for checking for batch to batch variation in the behaviour of a given coating powder. Correlation between the results from coating powders of differing composition is not to be expected.
This method is not suitable for coating powders which have gel times of less than 1 min at the test temperature when characterised according to ISO 8130‑6. This method is also not suitable for textured powders.
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-12:1998 |
Coating powders — Part 12: Determination of compatibility |
|
Withdrawn |
1998-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9038:2013 |
Determination of sustained combustibility of liquids |
ISO 9038:2013 specifies a pass/fail procedure, at temperatures up to 100 °C, to determine whether or not a liquid product, that would be classified as "flammable" by virtue of its flash point, has the ability to sustain combustion at the temperature or temperatures specified in the appropriate regulations.
The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, which have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards.
|
Withdrawn |
2013-07 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
75.080
Petroleum products in general
;
87.040
Paints and varnishes
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 8130-12:2019 |
Coating powders — Part 12: Determination of compatibility |
This document specifies a visual method to determine the deterioration of surface quality of the final coating when mixing two different coating powders. The surface quality will depend on the following characteristics of the coating powders:
a) the chemical reactivity;
b) the chemical composition;
c) the melt properties.
The onset of the incompatibility in appearance, its nature and its extent will depend greatly on the ratio in which the powders are mixed. The nature of the incompatibility in surface appearance can manifest itself in various ways, described in Clause 8.
This test is useful in predicting the possibility of incompatibility arising from mixing different powders both during the manufacturing process and during the application of the coating powder.
This document concerns only changes in visual aspects of the coating. The mixture series can also be used for testing properties such as mechanical properties, chemical properties, corrosive properties and resistance against UV radiation. Further properties can be agreed between interested parties.
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-13:2001 |
Coating powders — Part 13: Particle size analysis by laser diffraction |
|
Withdrawn |
2001-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-13:2019 |
Coating powders — Part 13: Particle size analysis by laser diffraction |
This document specifies a method for the determination of the equivalent-sphere particle size distribution of coating powders by laser diffraction, for particles of the size range from 1 µm to 300 µm.
NOTE There is a possibility that particle sizes >300 µm need the use of a different optical model.
This document is specific for the measurement of coating powders and also draws attention to ISO 13320, which provides guidance on instrument qualification and particle size distribution.
Laser diffraction is not suitable for determining oversize material, which can be verified by sieve analysis as described in ISO 8130‑1 or by dynamic image analysis as described in ISO 13322‑2.
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-14:2004 |
Coating powders — Part 14: Terminology |
ISO 8130-14:2004 defines special terms used in the field of coating powders.
|
Withdrawn |
2004-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-14:2019 |
Coating powders — Part 14: Vocabulary |
This document defines special terms used in the field of coating powders.
Other terms and definitions related to paints and varnishes are given in ISO 4618.
|
Published |
2019-04 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 8130-15:2023 |
Coating powders — Part 15: Rheology |
This document specifies methods for the determination of the rheological behaviour of a coating powder both in particulate and molten form.
|
Published |
2023-01 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 8130-16:2022 |
Coating powders — Part 16: Determination of density by liquid displacement in a measuring cylinder |
This document specifies a method for determining the density of coating powders by liquid displacement in a measuring cylinder. The method is based on a determination of the mass and the volume of a test portion. It can be used for all types of coating powders.
NOTE If the powder does not swell in contact with the displacement liquid used and if the displacement liquid replaces the air between the powder particles, it can then be used and compared with the method described in ISO 8130-3.
|
Published |
2022-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9038:2002 |
Test for sustained combustibility of liquids |
Many national and international regulations classify liquids as presenting a flammable hazard on the basis of their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot "sustain combustion" at some specified temperature or temperatures. This International Standard specifies a pass/fail procedure to determine whether or not a liquid product, that would be classified as "flammable" by virtue of its flash point, has the ability to sustain combustion at the temperature or temperatures specified in the appropriate regulations.
The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, which have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards.
|
Withdrawn |
2002-10 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/TR 9038:1991 |
Paints and varnishes — Determination of the ability of liquid paints to sustain combustion |
Describes a pass/fail procedure for use with paint and related products to determine whether or not a product has the ability to sustain combustion under specified conditions.
|
Withdrawn |
1991-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9038:2021 |
Determination of sustained combustibility of liquids |
This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as “flammable” by virtue of its flash point, sustains combustion at the temperature(s) specified e.g. in regulations.
NOTE Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot “sustain combustion” at some specified temperature(s).
The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, that have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards.
This test method is applicable, in addition to test methods for flash point, for assessing the fire hazard of a product.
|
Published |
2021-04 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
75.080
Petroleum products in general
;
87.040
Paints and varnishes
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9117-1:2009 |
Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time |
ISO 9117-1:2009 specifies a test method for determining under standard conditions whether a single coat or a multi-coat system of paint, varnish or related material has reached the through-dry state after a specified drying period.
The test procedure may also be used to determine the time taken to achieve that state.
|
Published |
2009-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9117-2:2010 |
Paints and varnishes — Drying tests — Part 2: Pressure test for stackability |
ISO 9117-2:2010 specifies a test method for determining, under standard conditions, whether a single‑coat film or a multi-coat system of paints or related materials, after a specified drying period, is sufficiently dry to resist damage when two painted surfaces or one painted surface and another surface are placed in contact under pressure.
The method is intended to simulate the conditions when painted articles are stacked upon each other.
|
Published |
2010-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9117-3:2010 |
Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini |
ISO 9117-3:2010 specifies a test method for determining the surface-drying characteristics of a coating of a paint or varnish which dries by the action of air or by chemical reaction of its components.
The method is not intended to apply to stoving products.
The method described may be carried out: as a "go/no go" test, by determining the surface-drying state after a specified time, to assess compliance with a particular requirement; by determining the surface-drying state at suitable intervals until the surface-drying time is obtained.
|
Published |
2010-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9117-4:2012 |
Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder |
ISO 9117-4:2012 specifies a test for determining the times taken to reach various stages of drying of organic coatings, using a mechanical straight-line or circular drying-time recorder. The use of a mechanical recorder is valuable in comparing the drying behaviour of coatings of the same generic type, when one coating might form a gel at a faster rate than another or might resist scratching better than another. The test is intended to simulate the conditions which exist when painted articles are stacked upon each other.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9117-5:2012 |
Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test |
ISO 9117-5:2012 specifies a method for determining whether coatings, including those produced using multi-coat systems, have reached various stages of drying. Furthermore, it allows the drying speed to be assessed.
In the case of plastic coatings, it is only possible to determine to a limited extent whether the later stages of drying have been reached, as the elasto-plastic behaviour of these coatings cannot be evaluated on the basis of a temporary visible change in the coating surface.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9117-6:2012 |
Paints and varnishes — Drying tests — Part 6: Print-free test |
ISO 9117-6:2012 specifies a method for assessing, by means of a simple empirical test, the resistance of a coat of paint, varnish or related product to imprinting by a nylon gauze under a specified force applied for a specified time.
The method may be carried out
either as a "pass/fail" test by determining whether the print-free state has been reached after a specified period of drying or, in the case of stoving coatings, after stoving and ageing under specified conditions,
or by repeating the print-free test at suitable intervals until the print-free time is obtained.
|
Published |
2012-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9117:1990 |
Paints and varnishes — Determination of through-dry state and through-dry time — Method of test |
|
Withdrawn |
1990-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 2834:1999/Cor 1:2003 |
Graphic technology — Test print preparation for offset and letterpress inks — Technical Corrigendum 1 |
|
Withdrawn |
2003-07 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO/CD 9124 |
Paints and varnishes — Thermal performance of paint films — Determination of solar irradiation penetration ratio with heat flow meter |
This document specifies the heat flow measurement method of the solar irradiation penetration ratio of paint films used for roofs and outer walls of a building, structures, equipment, and facilities that are situated outdoors and exposed to solar irradiation.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
87.040
Paints and varnishes
|
| ISO 9514:1992 |
Paints and varnishes — Determination of the pot-life of liquid systems — Preparation and conditioning of samples and guidelines for testing |
Specifies a method, carried out under standard conditions, for preparing and storing a sample so that its pot-life may be assessed by measuring a particular property. The method is based on conditioning the components separately, then mixing and allowing the blend to stand for specified periods of time under nearly adiabatic conditions.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|