| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 3232:1974 |
Paints and varnishes — Determination of quantity of material in a container |
|
Withdrawn |
1974-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3233-1:2013 |
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
ISO 3233-1:2013 describes a procedure for determining the non-volatile matter by volume, NVV, of coating materials and related products by measuring the density of a dried coating for any specified temperature range and period of drying or curing. This method determines the non-volatile matter immediately after application.
Using the non-volatile matter by volume results obtained in accordance with this part of ISO 3233, it is possible to calculate the spreading rate of coating materials.
The method specified in this part of ISO 3233 is the preferred method for air-drying materials. Its use for other materials still has to be tested.
ISO 3233-1:2013 is not applicable to coating materials in which the critical pigment volume concentration is exceeded.
|
Withdrawn |
2013-01 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3233-1:2019 |
Paints and varnishes — Determination of percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes' principle |
This document specifies a method for determining the non-volatile matter by volume (NVV) of coating materials and related products by measuring the density of a dried coating for any specified temperature range and period of drying or curing. This method determines the non-volatile matter immediately after application.
Using the non-volatile matter by volume results obtained in accordance with this document, it is possible to calculate the spreading rate of coating materials.
The method specified in this document is the preferred method for air-drying materials. Its use for other materials has not yet been tested.
Annex B gives an overview of the existing methods for determination of non-volatile-matter content and volume of non-volatile matter.
This document is not applicable to coating materials in which the critical pigment volume concentration is exceeded.
|
Published |
2019-11 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3233-2:2014 |
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle |
ISO 3233-2:2014 specifies a method for determining the non-volatile matter by volume (NVv) of coating materials by determining the practical dry-film density. This method determines the volume percentage of non-volatile matter in paints, varnishes and related products by measuring the density of a dry coating for any specified temperature range and period of drying or curing.
Using the non-volatile matter by volume results obtained in accordance with ISO 3233-2:2014, it is possible to calculate the practical spreading rate of coating materials.
This method specifies an additional shape of plate to those described in ISO 3233‑1 and is suitable for all products which can be applied by dipping.
|
Withdrawn |
2014-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3233-2:2019 |
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes' principle |
This document specifies a method for determining the non-volatile matter by volume (NVV) of coating materials by determining the practical dry-film density. This method determines the volume percentage of non-volatile matter in paints, varnishes and related products by measuring the density of a dry coating for any specified temperature range and period of drying or curing. The non-volatile matter content is determined in accordance with ISO 3251.
Using the non-volatile matter by volume results obtained in accordance with this document, it is possible to calculate the practical spreading rate of coating materials.
This method specifies an additional shape of plate to those described in ISO 3233‑1 and is suitable for all products which can be applied by dipping.
This document is not applicable to coating materials which exceed the Critical Pigment Volume Concentration (CPVC).
Annex A gives an overview of the existing methods for the determination of non-volatile matter content and of non-volatile matter volume.
|
Published |
2019-08 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4618-3:1999 |
Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface preparation and methods of application |
|
Withdrawn |
1999-06 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
;
25.220.10
Surface preparation
|
| ISO 3233-3:2015 |
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
ISO 3233-3:2015 a simple practical method for calculating the non-volatile matter by volume, NVV, of a coating material from the non-volatile-matter content, NV, the density of the coating material, and the density of the solvents. Using the non-volatile matter by volume results and the density obtained in accordance with this part of ISO 3233, it is possible to calculate the theoretical spreading rate of a coating material.
ISO 3233-3:2015 is not applicable to coating materials which exceed the critical pigment volume concentration (CPVC).
|
Published |
2015-05 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3233:1984 |
Paints and varnishes — Determination of volume of dry coating (non-volatile matter) obtained from a given volume of liquid coating |
|
Withdrawn |
1984-01 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3233:1998 |
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
|
Withdrawn |
1998-08 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3233:1998/Cor 1:1999 |
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating — Technical Corrigendum 1 |
|
Withdrawn |
1999-08 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3248:1975 |
Paints and varnishes — Determination of the effect of heat |
|
Withdrawn |
1975-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3248:1998 |
Paints and varnishes — Determination of the effect of heat |
|
Withdrawn |
1998-03 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3248:2016 |
Paints and varnishes — Determination of the effect of heat |
ISO 3248:2016 specifies a method for determining the resistance of single coatings or multi-coat systems of paints, varnishes or related products to changes in gloss and/or colour, blistering, cracking and/or detachment from the substrate under conditions of a specified temperature.
This procedure is applicable to products intended for use on domestic radiators or other articles likely to be subjected to similar temperatures.
|
Published |
2016-08 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3251:1993 |
Paints and varnishes — Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes |
Specifies a test method for determining the non-volatile matter content by mass of paints and varnishes, as well as resins and resin solutions that are intended for use as binders for paints and varnishes. Annex A gives required supplementary information, annex B describes the test conditions.
|
Withdrawn |
1993-09 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
;
87.060.20
Binders
|
| ISO 3251:2003 |
Paints, varnishes and plastics — Determination of non-volatile-matter content |
ISO 3251:2003 specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions, etc.).
The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (e.g. thickeners and film-forming agents). For the method to be usable for unplasticized polymer dispersions and rubber latices, the non-volatile residue (which consists essentially of the polymeric material and of small quantities of auxiliaries such as emulsifiers, protective colloids, stabilizers, solvents added as film-forming agents and -- especially for rubber latex concentrate -- preserving agents) has to be chemically stable under the test conditions. For plasticized samples, the residue, by definition, normally includes the plasticizer.
NOTE 1 The non-volatile-matter content of a product is not an absolute quantity but depends upon the temperature and period of heating used for the determination. Consequently, when using this method, only relative and not true values of the non-volatile-matter content are obtained owing to solvent retention, thermal decomposition and evaporation of low-molecular-mass constituents. The method is therefore primarily intended for testing different batches of the same type of product.
NOTE 2 This method is suitable for synthetic rubber latices provided heating for a specific period of time is considered appropriate.
NOTE 3 In-house methods for determining non-volatile matter often include drying with infrared or microwave radiation. Standardization of such methods is not possible, since they are not generally applicable. Some polymer compositions tend to decompose during such treatment and therefore give incorrect results.
|
Withdrawn |
2003-02 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
;
83.080.01
Plastics in general
;
87.060.20
Binders
|
| ISO 3679:1983 |
Paints, varnishes, petroleum and related products — Determination of flashpoint — Rapid equilibrium method |
Specifies a method of test for products when their flashpoint is below 110 °C. The test portion is heated in the specified apparatus for liquids whose expected flashpoint is between ambient temperature and 110 °C, but is cooled to at least 3 °C below expected flshpoint for liquids whose expected flashpoint is below ambient temperature. The ignition triaal is carried out after the test portion has been maintained under equilibrium conditions for 60 s at a temperature approximately 3 °C below the expected flashpoint. The trial is repeated at other temperatures. The temperatur at which the flash occurs is recorded as the flashpoint.
|
Withdrawn |
1983-12 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
75.080
Petroleum products in general
;
87.040
Paints and varnishes
|
| ISO 3251:2008 |
Paints, varnishes and plastics — Determination of non-volatile-matter content |
ISO 3251:2008 specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions, etc.).
The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (e.g. thickeners and film-forming agents). For the method to be usable for unplasticized polymer dispersions and rubber latices, the non-volatile residue (which consists essentially of the polymeric material and of small quantities of auxiliaries such as emulsifiers, protective colloids, stabilizers, solvents added as film-forming agents and — especially for rubber latex concentrate — preserving agents) has to be chemically stable under the test conditions. For plasticized samples, the residue, by definition, normally includes the plasticizer.
|
Withdrawn |
2008-02 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
;
83.080.01
Plastics in general
;
87.060.20
Binders
|
| ISO 3251:2019 |
Paints, varnishes and plastics — Determination of non-volatile-matter content |
This document specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions etc.).
The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (e.g. thickeners, film-forming agents).
NOTE 1 The non-volatile-matter content of a product is not an absolute quantity but depends upon the temperature and period of heating used for the determination. Consequently, when using this method, only relative and not true values for non-volatile-matter content are obtained owing to solvent retention, thermal decomposition and evaporation of low molecular mass constituents. The method is therefore primarily intended for testing different batches of the same type of product.
NOTE 2 This method is suitable for synthetic rubber lattices, provided heating for a specific period of time is considered appropriate (ISO 124 specifies heating until the loss in mass of a 2 g test portion following successive periods of heating is less than 0,5 mg).
NOTE 3 In-house methods for determining non-volatile matter often include drying with infrared or microwave radiation. Standardization of such methods is not possible, since they are not generally applicable. Several polymer compositions tend to decompose during such treatment and therefore give incorrect results.
|
Published |
2019-05 |
Edition : 5 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
;
83.080.01
Plastics in general
;
87.060.20
Binders
|
| ISO 3270:1980 |
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
|
Withdrawn |
1980-06 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
;
87.060.01
Paint ingredients in general
|
| ISO 3270:1984 |
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
Specifies conditions of temperature and relative humidity for general use. The test is applicable to coating materials in liquid or powder form, to wet or dry films, and their raw materials. The conditioning atmosphere and the test atmosphere are defined. This third edition cancels and replaces the second edition ISO 3270-1980.
|
Published |
1984-03 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
;
87.060.01
Paint ingredients in general
|
| ISO 3668:1976 |
Paints and varnishes — Visual comparison of the colour of paints |
|
Withdrawn |
1976-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3668:1998 |
Paints and varnishes — Visual comparison of the colour of paints |
|
Withdrawn |
1998-08 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3668:2017 |
Paints and varnishes — Visual comparison of colour of paints |
ISO 3668:2017 specifies a method for the visual comparison of the colour of films of paints or related products against a standard (either a reference standard or a freshly prepared standard) using artificial light sources in a standard booth.
It is not applicable to coatings containing special-effect pigments, e.g. metallic, without previous agreement on all details of illuminating and viewing conditions
|
Published |
2017-05 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3678:1976 |
Paints and varnishes — Print-free test |
Assessing by means of a simple method, the resistance of a coating film to imprinting by a nylon gauze under a specified force applied for a specified time. The method may be carried out either as test by determining whether the print-free state has been reached after a specified period of drying or, in the case od stoving coatings, after stoving and ageing under specified conditions, or by repeating the print-free test at suitable intervals.
|
Withdrawn |
1976-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3679:2004 |
Determination of flash point — Rapid equilibrium closed cup method |
ISO 3679:2004 specifies a method for the determination of the closed cup flash point of paints (including water-borne paints), varnishes, paint binders, adhesives, solvents, petroleum, and related products having closed cup flash points within the range of - 30 degrees Celsius to 300 degrees Celsius. When used in conjunction with the flash detector (A.1.6), ISO 3679:2004 is also suitable for the determination of the flash point of fatty acid methyl esters (FAME).
|
Withdrawn |
2004-04 |
Edition : 3 |
Number of pages : 18 |
Technical Committee |
75.080
Petroleum products in general
;
87.040
Paints and varnishes
|
| ISO 3679:2015 |
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
ISO 3679:2015 specifies procedures for flash point tests, within the temperature range of -30 °C to 300 °C, for paints, including water-borne paints, varnishes, binders for paints and varnishes, adhesives, solvents, petroleum, and related products. The procedures are used to determine whether a product will or will not flash at a specified temperature (flash no-flash Procedure A) or the flash point of a sample (Procedure B). When used in conjunction with a flash detector, ISO 3679:2015 is also suitable to determine the flash point of fatty acid methyl esters (FAME).
|
Withdrawn |
2015-03 |
Edition : 4 |
Number of pages : 22 |
Technical Committee |
75.080
Petroleum products in general
;
87.040
Paints and varnishes
|
| ISO 3679:2022 |
Determination of flash point – Method for flash no-flash and flash point by small scale closed cup tester |
This document describes three procedures (A, B and C) covering determinations of flash no-flash and flash point.
Rapid equilibrium procedures A and B are applicable to flash no-flash and flash point tests of paints, including water-borne paints, varnishes, binders for paints and varnishes, adhesives, solvents, petroleum products including aviation turbine, diesel and kerosene fuels, fatty acid methyl esters and related products over the temperature range –30 °C to 300 °C. The rapid equilibrium procedures are used to determine whether a product will or will not flash at a specified temperature (flash no-flash procedure A) or the flash point of a sample (procedure B). When used in conjunction with the flash detector (A.1.6), this document is also suitable to determine the flash point of fatty acid methyl esters (FAME). The validity of the precision is given in Table 2.
Non-equilibrium procedure C is applicable to petroleum products including aviation turbine, diesel and kerosine fuels, and related petroleum products, over the temperature range –20 °C to 300 °C. The non-equilibrium procedure is automated to determine the flash point. Precision has been determined over the range 40 °C to 135 °C.
For specifications and regulations, procedures A or B are routinely used (see 10.1.1).
|
Published |
2022-11 |
Edition : 5 |
Number of pages : 27 |
Technical Committee |
75.080
Petroleum products in general
;
87.040
Paints and varnishes
|
| ISO 3680:1983 |
Paints, varnishes, petroleum and related products — Flash/no flash test — Rapid equilibrium method |
The principle consists in heating the test portion in the specified apparatus. The ignition trial is carried out after the test portion has been maintained under equilibrium conditions for 60 s at the selected equilibrium temperature. This procedure ensures that air/vapour space above the test portion has attained the saturation concentration of flammable vapour before the ignition trial is performed. This method of test does not determine the flashpoint of the product under test, but merely its behaviour at the selected equilibrium temperature as may be required to comply with or regulations.
|
Withdrawn |
1983-06 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
75.080
Petroleum products in general
;
87.040
Paints and varnishes
|
| ISO 3680:2004 |
Determination of flash/no flash — Rapid equilibrium closed cup method |
ISO 3680:2004 specifies a method for the determination of the ability of paints (including water-borne paints), varnishes, paint binders, adhesives, solvents and petroleum and related products, when maintained at a selected test temperature within the range of - 30 degrees Celsius and 300 degrees Celsius, and under the conditions of test, to yield sufficient flammable vapour at this temperature to cause ignition on the application of a test flame in a standard manner. When used in conjunction with the flash detector (A.1.6), ISO 3680:2004 is also suitable to carry out a flash/no flash test on fatty acid methyl esters (FAME).
|
Withdrawn |
2004-04 |
Edition : 4 |
Number of pages : 18 |
Technical Committee |
75.080
Petroleum products in general
;
87.040
Paints and varnishes
|
| ISO 3856-1:1983 |
Paints and varnishes — Determination of "soluble" metal content — Part 1: Determination of lead content — Flame atomic absorption spectroscopic method and dithizone spectrometric method |
|
Withdrawn |
1983-06 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-1:1984 |
Paints and varnishes — Determination of "soluble" metal content — Part 1: Determination of lead content — Flame atomic absorption spectrometric method and dithizone spectrophotometric method |
The principle of the AAS method consists in aspiration of the test solution into an acetylen/air flame. Measurement of the absorption of the selected spectral line, emitted by a lead hollow-cathode or lead discharge lamp, in the region of 283,3 nm. The principle of the dithizone method consists in extraction of the lead from the test solution with an solution of dithizone in 1,1,1-trichloroethane. Spectrophotometric measurement of the red colour of the lead dithizonate at a wavelength of about 520 nm.
|
Published |
1984-12 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-2:1980 |
Paints and varnishes — Determination of "soluble" metal content — Part 2: Determination of antimony content — Flame atomic absorption spectroscopic method and Rhodamine B spectrophotometric method |
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4618-2:1984 |
Paints and varnishes — Vocabulary — Part 2: Terminology relating to initial defects and to undesirable changes in films during ageing |
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 3856-2:1984 |
Paints and varnishes — Determination of "soluble" metal content — Part 2: Determination of antimony content — Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method |
The methods are applicable to coating materials having "soluble" antimony contents in the range of about 0,05 % (m/m) to 5 % (m/m). The AAS method should be used as the referee method in cases of dispute. The principle of the flame atomic absorption spectrometric method consists in aspiration of the test solution into acetylen/air flame. measurement of the absorption of the selected line, amitted by an antimony hollow-cathode or antimony discharge lampe. The principle of the Rhodamine B spectrophotometric method consists in extraction of the antimony after oxidation from strong hydrochloric acid solution with di-isopropyl ether. Formation of a red complex with Rhodamine B solution, and spectrophotometric measurement of the colour at a wavelength of about 553 nm.
|
Published |
1984-10 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-3:1980 |
Paints and varnishes — Determination of "soluble" metal content — Part 3: Determination of barium content — Flame atomic emission spectroscopic method |
|
Withdrawn |
1980-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-3:1984 |
Paints and varnishes — Determination of "soluble" metal content — Part 3: Determination of barium content — Flame atomic emission spectrometric method |
The principle consists in the aspiration of the test solution into a dinitrogen monoxide/acetylene flame. Measurement of the radiation emitted by barium at a wavelength of 553,5 nm. The ionization of barium atoms in the flame is suppressed by addition of potassium chloride. The method is applicable to coating materials having "soluble" barium contents in the range of about 0,05 % (m/m) to 5 % (m/m). This method is the referee method in cases of dispute. This second edition cancels and replaces ISO 3856/3-1980, of which it constitutes a thorough revision.
|
Published |
1984-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-4:1980 |
Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectroscopic method and polarographic method |
|
Withdrawn |
1980-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-4:1984 |
Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method |
The principle of the AAS method consists in inspiration of the test solution into an acetylen/air flame. Measurement of the absorption of the selected spectral line emitted by a cadmium hollow-cathode or cadmium discharge lamp, in the region of 228,8 nm. The principle of the polarographic method consists in electrolysis of the test solution in a polarographic cell measurement of the corresponding heigth of the potential step. The method are applicable to coating materials having "soluble" cadmium contents in the range of about 0,05 % (m/m) to 5 % (m/m). The AAS method should be used as the referee method in cases of dispute. This second edition cancels and replaces ISO 3856/4-1980.
|
Published |
1984-10 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-5:1980 |
Paints and varnishes — Determination of "soluble" metal content — Part 5: Determination of hexavalent chromium content of the pigment and extender portion of the paint — Diphenylcarbazide spectrophotometric method |
|
Withdrawn |
1980-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-5:1984 |
Paints and varnishes — Determination of "soluble" metal content — Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form — Diphenylcarbazide spectrophotometric method |
The principle consists in formation of a coloured complex from hexavalent chromium and diphenylcarbazide solution. After addition of orthophosphoric acid and sulfuric acid, spectralphotometric easurement of the colour at a wavelength in the region of 540 nm. The method is applicable to coating materials having hexavalent chromium contents in the range of about 0,05 % (m/m) to 5 % (m/m). This method id the referee method in cases of dispute. This second edition cancels and replaces the ISO 3856/5-1980, of which it constitutes a through revision.
|
Published |
1984-10 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-6:1980 |
Paints and varnishes — Determination of "soluble" metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectroscopic method |
|
Withdrawn |
1980-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3856-6:1984 |
Paints and varnishes — Determination of "soluble" metal content — Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method |
|
Published |
1984-10 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4618-2:1999 |
Paints and varnishes — Terms and definitions for coating materials — Part 2: Special terms relating to paint characteristics and properties |
|
Withdrawn |
1999-06 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 3856-7:1984 |
Paints and varnishes — Determination of "soluble" metal content — Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints — Flameless atomic absorption spectrometric method |
The principle consists in oxidation of the of hte mercury compounds contained in the test solution obtained from the pigment portion of the paint or combustion with oxygen in an enclosed system of the evaporation residue of the test solution obtained from the liquid portion of water-dilutable paints. Reduction of the mercury(II) compounds to elementary mercury. Determination of the mercury, as the monoatomic vapour, by cold vapour (flameless) atomic absorption spectrometry at a wavelength in the region of 253,7 nm. The method is applicable to coating materials having "soluble" mercury contents in the range of about 0,005 % (m/m) to 0,05 % (m/m).
|
Published |
1984-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3905:1980 |
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) |
|
Withdrawn |
1980-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3905:1980/Amd 1:1981 |
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) — Amendment 1 |
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3906:1980 |
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) |
|
Withdrawn |
1980-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 3906:1980/Amd 1:1981 |
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) — Amendment 1 |
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4617-1:1978 |
Paints and varnishes — List of equivalent terms — Part 1: General terms |
|
Withdrawn |
1978-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4617-2:1982 |
Paints and varnishes — List of equivalent terms |
|
Withdrawn |
1982-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4617-3:1986 |
Paints and varnishes — List of equivalent terms |
|
Withdrawn |
1986-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4617-4:1986 |
Paints and varnishes — List of equivalent terms |
|
Withdrawn |
1986-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4617:2000 |
Paints and varnishes — List of equivalent terms |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 41 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4618-1:1978 |
Paints and varnishes — Vocabulary — Part 1: General terms |
|
Withdrawn |
1978-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4618-1:1978/Add 1:1982 |
Paints and varnishes — Vocabulary — Part 1: General terms — Addendum 1 |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4618-1:1984 |
Paints and varnishes — Vocabulary — Part 1: General terms |
|
Withdrawn |
1984-11 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4618-1:1998 |
Paints and varnishes — Terms and definitions for coating materials — Part 1: General terms |
|
Withdrawn |
1998-12 |
Edition : 3 |
Number of pages : 18 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4618:2006 |
Paints and varnishes — Terms and definitions |
ISO 4618:2006 is a trilingual vocabulary which defines English, French and German terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes).
Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders.
|
Withdrawn |
2006-10 |
Edition : 1 |
Number of pages : 65 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4618:2014 |
Paints and varnishes — Terms and definitions |
ISO 4618:2014 defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes). Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders.
Terms and definitions from ISO 4618:2014 can be viewed free of charge on the ISO online browsing platform (OBP): https://www.iso.org/obp/ui/
|
Withdrawn |
2014-10 |
Edition : 2 |
Number of pages : 125 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4618:2023 |
Paints and varnishes — Vocabulary |
This document defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes).
Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, including corrosion protection (see the ISO 12944 series), coating powders (see ISO 8130-14), electro-deposition coatings (see ISO 22553-1) and rheology (see ISO 3219-1).
Terms on nanotechnologies are harmonized with the ISO 80004 series.
Terms on pigments and extenders are harmonized with ISO 18451-1.
|
Published |
2023-02 |
Edition : 3 |
Number of pages : 39 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 4622:1980 |
Paints and varnishes — Pressure test for stackability |
|
Withdrawn |
1980-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4622:1992 |
Paints and varnishes — Pressure test for stackability |
Specifies a test method for determining, under standard conditions, whether a single-coat film or a multi-coat system of paints after a specified drying period is sufficiently dry to resist damage when two painted surfaces or one painted surface and another surface are placed in contact under pressure. For any particular application, it needs to be completed by supplementary information.
|
Withdrawn |
1992-12 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-1:2000 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates |
|
Withdrawn |
2000-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-1:2018 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates |
This document describes a test procedure for assessing the protective action of coatings of paints or varnishes on steel against filiform corrosion arising from a scribed mark cut through the coating.
It is only suitable for assessing the performance of the coating/substrate combination tested. It is not suitable for predicting the performance of the coating on different substrates.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-2:2003 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates |
ISO 4623-2:2003 describes a test procedure for assessing the protective action of coatings of paints or varnishes on aluminium against filiform corrosion arising from a scribe mark cut through the coating.
It is only suitable for assessing the performance of the coating/substrate combination tested. It is not suitable for predicting the performance of the coating on different substrates.
|
Withdrawn |
2003-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-2:2003/Cor 1:2005 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates — Technical Corrigendum 1 |
|
Withdrawn |
2005-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623-2:2016 |
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates |
ISO 4623-2:2016 describes a test procedure for assessing the protective action of coatings of paints or varnishes on aluminium against filiform corrosion arising from a scribe mark cut through the coating.
It is only suitable for assessing the performance of the coating/substrate combination tested. It is not suitable for predicting the performance of the coating on different substrates.
|
Published |
2016-08 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4623:1984 |
Paints and varnishes — Filiform corrosion test on steel |
|
Withdrawn |
1984-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4624:1978 |
Paints and varnishes — Pull-off test for adhesion |
Specifies a method for assessing the adhesion of a single coating or a multi-coat system of a coating material by measuring the minimum tensile stress necessary to detach or to rupture the coating in a direction perpendicular to the substrate. The test may be applied using a wide range of substrates. Different procedures are specified according to whether the substrate is deformable, for example sheet metal or plastics, or rigid, for example thick concrete. The result is the minimum tensile stress necessary to breack the weakest interface (adhesive failure) or the weakest component (cohesive failure).
|
Withdrawn |
1978-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4624:2002 |
Paints and varnishes — Pull-off test for adhesion |
This International Standard describes methods for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.
The test may be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, for example thin metal, plastics and wood, or rigid, for example thick concrete and metal plates. For special purposes, the coating may be applied directly to the face of a test dolly.
|
Withdrawn |
2002-02 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4624:2016 |
Paints and varnishes — Pull-off test for adhesion |
ISO 4624:2016 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.
The test may be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, for example thin metal, plastics and wood, or rigid, for example thick concrete and metal plates. To avoid distortion of the substrate during the tensile test, it is common to use a sandwich construction. For example, for special purposes, the coating may be applied directly to the face of a test dolly.
|
Published |
2016-03 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/FDIS 4624 |
Paints and varnishes — Pull-off test for adhesion |
ISO 4624:2016 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.
The test may be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, for example thin metal, plastics and wood, or rigid, for example thick concrete and metal plates. To avoid distortion of the substrate during the tensile test, it is common to use a sandwich construction. For example, for special purposes, the coating may be applied directly to the face of a test dolly.
|
Under development |
|
Edition : 4 |
Number of pages : 12 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4627:1981 |
Paints and varnishes — Evaluation of the compatibility of a product with a surface to be painted — Methods of test |
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-1:1978 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of quantity and size of common types of defect — Part 1: General principles and pictorial scales for blistering and rusting |
|
Withdrawn |
1978-07 |
Edition : 1 |
|
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-1:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 1: General principles and rating schemes |
Establishes a general system for designating the intensity, quantity and size of common types of defects and outlines the basic principles of the system in respect of designation of the intensity, quantity and size of defects. A uniform convention has been adopted for designating the intensity and quantity of defects: "o" denoting no defects, and "5" denoting defects so severe that further discrimination has no practical meaning. The schemes given in this document are intended to provide a system for describing, in a standard manner, test areas.
|
Withdrawn |
1982-05 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-1:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system |
ISO 4628-1:2003 defines a system for designating the quantity and size of defects and the intensity of changes in the appearance of coatings and outlines the general principles of the system used throughout ISO 4628. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
The other parts of ISO 4628 provide pictorial standards or other means of evaluating particular types of defect. As far as possible, already existing evaluation schemes have been used as the basis.
This part of ISO 4628 can also be used for assessing defects not covered by the other parts of ISO 4628.
|
Withdrawn |
2003-09 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-1:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system |
ISO 4628-1:2016 defines a system for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system used throughout ISO 4628. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes, for example yellowing.
The other parts of ISO 4628 provide pictorial standards or other means for evaluating particular types of defect. As far as possible, already existing evaluation schemes have been used as the basis.
ISO 4628-1:2016 is also used for assessing defects not covered by the other parts of ISO 4628.
|
Published |
2016-01 |
Edition : 4 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-2:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 2: Designation of degree of blistering |
This document provides pictorial standards for designating the degree of blistering. The principle of the method consists in rating the density and size of the blisters by means of the pictorial standards. The photographic reference standards have been adopted from ASTM D 714-56. Replaces and cancels section two of ISO 4628/1-1978.
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-2:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering |
ISO 4628-2:2003 describes a method for assessing the degree of blistering of coatings by comparison with pictorial standards.
NOTE The pictorial standards have been adopted from ASTM D 714, Standard Test Method for Evaluating Degree of Blistering of Paints. The correlation between the ISO and ASTM rating systems is shown in an annex.
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-2:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering |
ISO 4628-2:2016 specifies a method for assessing the degree of blistering of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 illustrate blisters in the sizes 2, 3, 4, and 5, and each size in the quantities (densities) 2, 3, 4, and 5.
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2016-01 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-3:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 3: Designation of degree of rusting |
This document provides pictorial standards for designating the degree of rusting. The standards given are basically indended for rating on coated steel. They may used for designating the degree of corrosion of non-ferrous metals if the form of breakdown is comparable with that on the standards. Cancels and replaces section three of ISO 4628/1-1978.
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-3:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
ISO 4628-3:2003 describes a method for assessing the degree of rusting of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.
NOTE 1 The pictorial standards have been selected from the European rust scale published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the European rust scale is given in an annex.
NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610, Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces, is also given in an annex.
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-5:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
ISO 4628-5:2016 specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards.
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Withdrawn |
2016-01 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7253:1996 |
Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
Describes a method for determining the resistance of coatings to neutral salt spray in accordance with the requirements of product specifications.
|
Withdrawn |
1996-12 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-3:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.
NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1.
NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610 is given in Annex B, Table B.2.
NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 8501‑1 (rust grades A, B, C, and D).
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2016-01 |
Edition : 3 |
Number of pages : 15 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/CD 4628-3 |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.
NOTE 1 The pictorial standards have been selected from the "European rust scale" published by the European Confederation of Paint, Printing Ink and Artists' Colours Manufacturers' Associations (CEPE), Brussels. The correlation between the ISO scale and the "European rust scale" is given in Annex B, Table B.1.
NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610 is given in Annex B, Table B.2.
NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 8501‑1 (rust grades A, B, C, and D).
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-4:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 4: Designation of degree of cracking |
Provides pictorial standards for designating. The quantity of cracking is rated by reference to table 2 of ISO 4628/1 and using as examples figures 1 or 2, depending on the type of cracking. The average size of the cracks is designated according to the classification.
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-4:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking |
ISO 4628-4:2003 describes a method for assessing the degree of cracking of coatings by comparison with pictorial standards, using the designation system defined in ISO 4628-1.
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-4:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking |
ISO 4628-4:2016 specifies a method for assessing the degree of cracking of coatings by comparison with pictorial standards.
ISO 4628‑1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2016-01 |
Edition : 3 |
Number of pages : 15 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-5:1982 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 5: Designation of degree of flaking |
Provides pictorial standards for rating of flaking. The quantity of damage is rated on the basis of the relative area flaked, by reference to table 1 and using the figures 1 and 2 as examples.
|
Withdrawn |
1982-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-5:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
ISO 4628-5:2003 describes a method for assessing the degree of flaking of coatings by comparison with pictorial standards, using the designation system defined in ISO 4628-1.
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 7254:1984 |
Paints and varnishes — Assessment of natural spreading rate — Brush application |
|
Withdrawn |
1984-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-5:2022 |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
This document specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards.
ISO 4628-1 specifies the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings. It also outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
|
Published |
2022-11 |
Edition : 4 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-6:1990 |
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 6: Rating of degree of chalking by tape method |
ISO 4628 is a series of standards dealing with the sampling and testing of paints, varnishes and related products. This part provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-6:2007 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
ISO 4628-6:2007 provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt, particularly when chalking is slight.
|
Withdrawn |
2007-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-6:2011 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
ISO 4628-6:2011 provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated.
|
Published |
2011-09 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/DIS 4628-6 |
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
ISO 4628-6:2011 provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated.
|
Under development |
|
Edition : 4 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-7:2003 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method |
ISO 4628-7:2003 describes a method suitable, in particular, for rating the degree of chalking on white or coloured exterior coatings and coating systems on rough surfaces (i.e. those having a roughness greater than segment 4 of reference comparator G as described in ISO 8503-1).
The test method specified may also be used for the assessment of the degree of chalking of coatings and coating systems on smooth surfaces, but the method specified in ISO 4628-6 is preferable for this purpose.
The test method is applicable to coatings and coating systems on mineral substrates, e.g. fibre cement, brick, concrete and renderings, independent of the structure of the surface. The method can be used quite effectively by experienced operators and is recommended for laboratory use as well as for on-site evaluation.
|
Withdrawn |
2003-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-7:2016 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method |
ISO 4628-7:2016 specifies a method suitable, in particular, for rating the degree of chalking on white or coloured exterior coatings and coating systems on rough surfaces (i.e. those having a roughness greater than segment 4 of the reference comparator G as described in ISO 8503‑1).
The test method specified can also be used for the assessment of the degree of chalking of coatings and coating systems on smooth surfaces, but the method specified in ISO 4628‑6:2011 is preferable for this purpose.
The test method is applicable to coatings and coating systems on mineral substrates, e.g. fibre cement, brick, concrete, and renderings, independent of the structure of the surface. The method can be used quite effectively by experienced operators and is recommended for laboratory use as well as for on-site evaluation.
NOTE 1 When a reference to this test method is included in specifications, the test conditions (i.e. weathering method and substrate) have to be agreed between the interested parties.
NOTE 2 The method described in this part of ISO 4628 is a relative ranking method and is therefore not suitable for use in agreements between parties. See, however, the Note to Table 1.
NOTE 3 Refer to ISO 4628‑1 for the designation system for quantity and size of defects and the intensity of changes in appearance of coatings, as well as general principles of the system.
|
Published |
2016-01 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 4628-8:2005 |
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe |
ISO 4628-8:2005 specifies a method for assessing delamination and corrosion, caused by a corrosive environment, around a scribe in a coating on a test panel or other test specimen.
|
Withdrawn |
2005-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|