| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/TS 19392-6:2023 |
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge |
This document describes a method to measure ice adhesion from artificial ice on test substrates by using a centrifuge. Basic ice types are defined and test parameters for the ice removal are described to achieve reproducibility of test results for ice adhesion measurements for rotor blade coatings. This document does not intend to provide fixed test parameter to account for the diversity of relevant icing scenarios in this field of application.
|
Published |
2023-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 19396-1:2017 |
Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane |
ISO 19396-1:2017 specifies a method for laboratory measurement of the pH value of polymer dispersions and coating materials using pH electrodes with a glass membrane. ISO 19396‑2 specifies a method for measuring the pH value using pH electrodes with ion-sensitive field-effect transistor (ISFET) technology.
|
Published |
2017-08 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 19396-2:2017 |
Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology |
ISO 19396-2:2017 specifies a method for measuring the pH value of dispersions and coating materials using pH electrodes with ion-sensitive field-effect transistor (ISFET) technology. ISO 19396‑1 specifies a method for measuring the pH value using pH electrodes with a glass membrane.
|
Published |
2017-08 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TS 19397:2015 |
Determination of the film thickness of coatings using an ultrasonic gage |
ISO/TS 19397:2015 describes a method for determining the film thickness of coatings on metallic and non-metallic substrates using an ultrasonic gauge.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 19399:2016 |
Paints and varnishes — Wedge-cut method for determination of film thickness (scribe and drill method) |
ISO 19399:2016 specifies a destructive method for determination of the dry film thickness, in which damage to the coat caused in a definite manner is evaluated microscopically. The method is suitable for almost all coat-substrate combinations and also allows determination of the single film thicknesses of coating systems.
The method cannot be applied or can only be applied with restrictions in case of
- too soft and/or elastic coatings (no recognizable scribe or drill hole can be observed),
- hard (cannot be scribed/drilled) or too soft and/or elastic substrates,
- too low visual contrast between the coating and substrate, and
- film thicknesses that are larger than the depth of field of the measuring microscope.
|
Published |
2016-05 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TR 19402:2018 |
Paints and varnishes — Adhesion of coatings |
This document summarises the common methods for evaluating the adhesive strength of coatings on a substrate, which can be another coating beneath or the substrate itself. The test methods and evaluation methods are described in Clauses 4, 5, and 6. In the case of standardized test methods the respective standard is referenced in regard to procedure and evaluation. Annex A compares the methods in the synoptic Tables A.1, A.2, and A.3.
Often the adhesive strength cannot be sufficiently evaluated by means of a single method.
The purely physical methods for measuring the adhesive strength are such in which mechanical quantities (e.g. force or torsion moment) are measured directly.
All other methods are based on the evaluation of behaviour under mechanic stress according to practical conditions. For these methods the viscoelastic properties have a wide influence on the evaluation of the adhesive strength, so that it can only be tested comparatively within one method.
Each method has its specific application. An unsuitable method can lead to false information. All of the test methods for the evaluation of the adhesive strength require a certain routine of the test person, especially in regard to identifying the separation line. For most of the test methods the test results, among other things, depend on the film thickness of the coating to be tested. In addition, for several methods differences between tests on a test sheet and in practice can occur, due to different roughness of the substrate.
Effects of delamination caused by weathering or corrosion influences are not subject of this document.
In case cohesion failures predominantly occur during an adhesive strength test, this is no measure for the adhesive strength. However, information can be given on the protective effect of the coating against corrosion.
|
Published |
2018-08 |
Edition : 1 |
Number of pages : 78 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 19403-1:2017 |
Paints and varnishes — Wettability — Part 1: Terminology and general principles |
The ISO 19403 series specifies optical test methods
- for the measurement of the contact angle,
- for the determination of the free surface energy of a solid surface, including the polar and dispersive fractions,
- for the determination of the surface tension of liquids, including the polar and dispersive fractions, and
- for the checking of the measurement arrangement with reference materials.
It can be applied for the characterization of substrates, coatings and coating materials.
The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-1:2017 specifies terms and definitions and defines the general principles.
[1] This term is defined in DIN 1342-1.
|
Withdrawn |
2017-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 19403-1:2022 |
Paints and varnishes — Wettability — Part 1: Vocabulary and general principles |
This document specifies general terms and definitions for wettability. Some general principles are described in Annex A. This document is intended to be used in conjunction with ISO 4618.
|
Published |
2022-06 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 20266:2018 |
Paints and varnishes — Determination of image clarity (degree of sharpness of reflected or transmitted image) |
This document specifies an instrumental method for determining the image clarity on paint films (coatings) by measuring reflection from the specimen surface or transmission through the specimen.
The method can be applied only to a flat surface.
|
Published |
2018-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 20340:2009 |
Paints and varnishes — Performance requirements for protective paint systems for offshore and related structures |
ISO 20340:2009 deals with performance requirements for protective paint systems for offshore and related structures (i.e. those exposed to the offshore environment, as well as those immersed in sea or brackish water). It can also be used for other structures, provided that the paints or protective paint systems selected comply with ISO 20340.
ISO 20340 includes:
the test methods to be used to determine the composition of the separate components of the protective paint system;
the laboratory performance test methods for the assessment of the likely durability of the protective paint system;
the criteria to be used to evaluate the results of performance tests.
|
Withdrawn |
2009-04 |
Edition : 2 |
Number of pages : 23 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 20566:2005 |
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory car-wash |
ISO 20566:2005 describes a test procedure for assessing the scratch resistance of organic paint coatings, in particular paint coatings used in the automotive industry (i.e. for assessing their car-wash resistance). Machine-based washing is simulated in the laboratory environment using a rotating brush and synthetic dirt. The test conditions have been designed to be as close as possible to the real conditions in a car-wash.
|
Withdrawn |
2005-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
43.020
Road vehicles in general
;
87.040
Paints and varnishes
|
| ISO 20566:2013 |
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
|
Withdrawn |
2013-02 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
43.020
Road vehicles in general
;
87.040
Paints and varnishes
|
| ISO 20566:2020 |
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
This document specifies a test procedure for assessing the scratch resistance of organic paint coatings, in particular paint coatings used in the automotive industry (i.e. for assessing their car-wash resistance). Machine-based washing is simulated in the laboratory environment using a rotating brush and synthetic dirt. The test conditions have been designed to be as close as possible to the real conditions in a car-wash. If the test parameters are suitably chosen, the method can also be used for testing protective plastics films and plastics components.
|
Published |
2020-05 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
43.020
Road vehicles in general
;
87.040
Paints and varnishes
|
| ISO 20567-1:2005 |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing |
ISO 20567-1:2005 specifies three methods for the evaluation of the resistance of automobile finishes and other coatings to chilled-iron grit projected onto the surface under test to simulate the impact of small stones.
|
Withdrawn |
2005-02 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 20567-1:2017 |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing |
ISO 20567-1:2017 specifies three methods for the evaluation of the resistance of automobile finishes and other coatings to chilled-iron grit projected onto the surface under test to simulate the impact of small stones.
|
Published |
2017-01 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 20567-2:2005 |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body |
ISO 20567-2:2005 specifies a method for the evaluation of the resistance of automobile finishes and other coatings to the impact of a wedge-shaped body projected onto the surface under test to simulate the impact of stones.
|
Withdrawn |
2005-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 20567-2:2017 |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body |
ISO 20567-2:2017 specifies a method for the evaluation of the resistance of automobile finishes and other coatings to the impact of a wedge-shaped body projected onto the surface under test to simulate the impact of stones.
|
Published |
2017-01 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/PRF 20567-2 |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body |
ISO 20567-2:2017 specifies a method for the evaluation of the resistance of automobile finishes and other coatings to the impact of a wedge-shaped body projected onto the surface under test to simulate the impact of stones.
|
Under development |
2023-06 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 20567-3:2012 |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body |
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 20567-4:2023 |
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 4: Mobile multi-impact testing on a small testing area |
This document specifies a mobile method for evaluating the resistance of automotive finishes to chilled-iron grit projected onto the surface under test to simulate the effect of stone chipping.
Results from the test specified in this document are not comparable with results specified in ISO 20567-1.
|
Published |
2023-03 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/CD TR 20659-1 |
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
87.040
Paints and varnishes
|
| ISO/CD TR 20659-2 |
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy). |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
87.040
Paints and varnishes
|
| ISO 21227-1:2003 |
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance |
ISO 21227-1:2003 gives definitions for and provides guidance in the use of optical imaging systems for the quantitative characterization of defects on coated surfaces that occur after exposure in various test methods, e.g. stone chipping, weathering or cross-cut testing. One aim of ISO 21227 is to use optical imaging to reproduce the results of already existing methods for visual assessment. Additionally, optical imaging provides further information which can be used for a more detailed evaluation of coating defects.
This part of ISO 21227 contains a general introduction in optical-imaging methods and definitions. The performance of individual test methods and requirements for precision are described in other parts of the standard.
|
Published |
2003-08 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 21227-2:2006 |
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 2: Evaluation procedure for multi-impact stone-chipping test |
ISO 21227-2:2006 describes a procedure for evaluating multi-stone impact damage by means of optical imaging. A suitable method for simulating the damaging process is specified in ISO 20567-1.
|
Published |
2006-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 21227-3:2007 |
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 3: Evaluation of delamination and corrosion around a scribe |
ISO 21227-3:2007 specifies a method for evaluating delamination and corrosion around a scribe by means of digital optical imaging. The damaged surface can be produced in accordance with ISO 9227, ISO 11997-1 or ISO 11997-2.
|
Published |
2007-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 21227-4:2008 |
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 4: Evaluation of filiform corrosion |
ISO 21227-4:2008 describes a method for evaluating filiform corrosion by means of digital optical imaging. Only the evalution procedure is described. The filiform corrosion itself is produced in accordance with other standards.
|
Published |
2008-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 21545:2018 |
Paints and varnishes — Determination of settling |
This document specifies a method for determining the settling of coating materials. It is used to determine short-time settling, e.g. during transport or in an electro-deposition bath.
|
Published |
2018-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 21546:2019 |
Paints and varnishes — Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) |
This document specifies a method for determining the resistance of a coating to rubbing by means of a loaded abrasive material which is linearly moved over the surface to be tested.
The method can also be applied to different material surfaces, such as plastics and metals.
|
Published |
2019-02 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/CD 22932-9 |
Mining — Vocabulary — Part 9: Drainage |
This document specifies the commonly used terms in mine Extraction.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO/TR 21555:2019 |
Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings |
This document provides an overview for selecting the most suitable test method regarding the evaluation of the hardness and the wear resistance of coatings.
Annex A gives a summarized list of test methods for the evaluation of the hardness and of the wear resistance of coatings for different stresses.
Methods for testing cross-linking (wear test in connection with solvents) and abrasion tests with multiple impacts are not covered by this document.
|
Published |
2019-08 |
Edition : 1 |
Number of pages : 71 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22516:2019 |
Paints and varnishes — Practical determination of non-volatile and volatile matter content during application |
This document specifies a test method for the determination of non-volatile matter of coatings directly after application or after intermediate or final drying. In practice, the determination of volatile matter is applied particularly in regard to water-thinnable coatings which are re-coated with an additional coating material.
Furthermore, the method can be used to compare the efficiency of different application and drying methods.
The content of non-volatile or volatile matter of a product after application is no absolute variable but depends on the application and drying conditions applied during the test. Consequently, applying this method gives only relative values and not the real values for the content of non-volatile matter, due to solvent retention, thermal decomposition and evaporation of low-molecular contents.
|
Published |
2019-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22518:2019 |
Paints and varnishes — Determination of solvents in water-thinnable coating materials — Gas-chromatographic method |
This document specifies a method for the gas-chromatographic determination of the solvents in water-thinnable paints and varnishes, binder solutions, emulsions and dispersions.
With the precision stated in Clause 13, single components above 0,02 % (mass fraction) can be determined quantitatively.
The method defined in this document is not applicable for the determination of Volatile Organic Compounds (VOC) and Semi-Volatile Organic Compounds (SVOC) content.
NOTE For the determination of VOC and SVOC, see ISO 11890‑2[2].
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-1:2019 |
Paints and varnishes — Electro-deposition coatings — Part 1: Vocabulary |
This document defines terms for electro-deposition coatings.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
;
01.040.87
Paint and colour industries (Vocabularies)
|
| ISO 22553-2:2019 |
Paints and varnishes — Electro-deposition coatings — Part 2: Throwing power |
This document specifies two methods for the determination of the throwing power of electro-deposition coating materials.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-3:2019 |
Paints and varnishes — Electro-deposition coatings — Part 3: Compatibility of electro-deposition coating materials with a reference oil |
The document specifies a method for the determination of the compatibility of electro-deposition coating materials with a reference oil.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-4:2019 |
Paints and varnishes — Electro-deposition coatings — Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials |
This document specifies three different methods of electro-deposition coating material contamination with liquid, paste-like and solid foreign materials.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-5:2019 |
Paints and varnishes — Electro-deposition coatings — Part 5: Determination of sieve residue |
This document specifies a method for the determination of soiling material, e.g. from previous processes, non-dispersed paint particles and other foreign material in the electro-deposition coating material.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
In practice, increased sieve residue can have different causes, such as metal particles, which are introduced together with the object to be coated, or clots.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-16:2022 |
Paints and varnishes — Electro-deposition coatings — Part 16: Pigment-binder ratio |
This document specifies a test method for determining the pigment-binder ratio.
It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2022-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-6:2019 |
Paints and varnishes — Electro-deposition coatings — Part 6: Entry marks |
This document specifies a method for identifying entry marks, which can occur during electro-deposition coating. Entry marks can often occur in the form of streaks when the workpiece, either set as cathode or anode, is immersed in the electro-deposition tank under applied electric potential (relation of voltage and current). These marks occur parallel to the bath surface on the objects to be coated.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-7:2020 |
Paints and varnishes — Electro-deposition coatings — Part 7: Electrical wet-film resistance |
1 Scope This document specifies a method for determining the wet-film resistivity of an electro-deposition coating (e‑coat) for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2020-05 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-8:2020 |
Paints and varnishes — Electro-deposition coatings — Part 8: Electric charge density |
This document specifies a method for determining the electric charge density of an electro-deposition coating (e‑coat) for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-9:2020 |
Paints and varnishes — Electro-deposition coatings — Part 9: Stoving loss |
This document specifies a method for determining the volatile-matter content of electro-deposition coatings (e-coats) during stoving (stoving loss) used for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2020-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-10:2022 |
Paints and varnishes — Electro-deposition coatings — Part 10: Edge protection |
This document specifies a test method for the evaluation of protection against corrosion of edges and stamping burrs by electro-deposition coatings.
It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2022-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-11:2020 |
Paints and varnishes — Electro-deposition coatings — Part 11: Bath stability |
This document specifies a method for assessing the bath stability of electro-deposition coatings used for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2020-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-12:2020 |
Paints and varnishes — Electro-deposition coatings — Part 12: Sedimentation on horizontal areas |
This document specifies a method for assessing the sedimentation of electro-deposition coating materials on horizontal surfaces used for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2020-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-13:2021 |
Paints and varnishes — Electro-deposition coatings — Part 13: Determination of re-solving behaviour |
This document specifies a method for determining the re-solving effect of electro-deposition coatings.
It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-14:2021 |
Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour |
This document specifies a method for determining the deposition behaviour of an electro-deposition coating (e-coat) on various substrates and with various pre-treatments.
It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22553-15:2022 |
Paints and varnishes — Electro-deposition coatings — Part 15: Permeate residues |
This document specifies a test method for estimating the influence of jetting liquids from the rinsing process after electro-deposition coating (permeate residues) on a coating.
It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
|
Published |
2022-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 351:1975 |
Coal and coke — Determination of total sulphur — High temperature combustion method |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 22557:2019 |
Paints and varnishes — Scratch test using a spring-loaded pen |
This document specifies a method for determining the resistance of a coating to scratches introduced by a usually hand-held loaded stylus.
The test can be carried out using a point stylus (method A) or using a disc stylus (method B).
Both methods are generally applicable and can be used in the field as well as on curved surfaces. Method A can also be applied on small test specimens (minimum dimensions 30 mm × 50 mm).
The test can be carried out as a "pass/fail" test (test requirement I) or as a classification test (test requirement II).
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22969:2019 |
Paints and varnishes — Determination of solar reflectance |
This document specifies a method to determine the solar reflectance of coating systems using a spectrophotometer with a wide spectral range (300 nm to 2 500 nm) and global solar radiation.
This document is applicable to coating systems.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22970:2019 |
Paints and varnishes — Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage |
This document specifies three methods for testing the peel adhesion, peel strength and tensile lap-shear strength in order to evaluate the adhesive bond as well as the type, location and structure of failures of elastic adhesives on coatings. These methods are used, for example, for testing the assembly with respect to the bond of panes or built-on parts, such as plastic covers, spoilers, instrument panel covers, headlights, with coatings for automobile construction. The two methods of climatic exposure of specimens described herein are the condensation test and cataplasm storage.
This document does not specify requirements for adhesives and coatings.
NOTE The peel strength test (method B) for rigid car body construction adhesives is described in ISO 8510‑2. The tensile lap-shear strength test (method C) for rigid car body construction adhesives is described in EN 1465. Testing of rigid car body construction adhesives is generally conducted on small joint thicknesses, i.e. <1 mm.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 22987:2020 |
Ships and marine technology — Laboratory test method for skin friction of antifouling paints by rotating drum |
This document provides a laboratory test method to determine the skin-friction of antifouling paints coated on drums.
The results of the laboratory-tested friction of painted drums over a certain period of time can be used for screening of antifouling paints and characterizing changes in friction for different antifouling paints, amongst other applications and other purposes depending on the user's need.
This document is applicable to both biocidal-based and biocide-free antifouling paints.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
;
47.020.10
Hulls and their structure elements
|
| ISO 23168:2019 |
Paints and varnishes — Determination of water content — Gas-chromatographic method |
This document specifies a method for the determination of the water content of water-borne coating materials and their raw materials by using a gas chromatograph. The preferred working range of this test method is from a water mass fraction of 15 % to a water mass fraction of 90 % but the method can be applied outside of this range.
|
Published |
2019-04 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 23169:2020 |
Paints and varnishes — On-site test methods on quality assessment for interior wall coatings |
This document specifies two on-site test methods (on-site cleanability [stain removal] and on-site wet-scrub resistance) for the evaluation of the quality assessment for interior wall coatings.
These test methods are applicable to white coatings and light-coloured coatings of tristimulus value Y10 greater than 25 measured on a test specimen consisting of a coating applied to a black substrate.
The cleanability test can differentiate the coating quality between 18 % of the pigment volume concentration (PVC) and the critical pigment volume concentration (CPVC). The on-site wet-scrub resistance test method can differentiate the coating quality when the PVC is nearly equal to the CPVC or above.
|
Published |
2020-01 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 23321:2019 |
Solvents for paints and varnishes — Demineralized water for industrial applications — Specification and test methods |
This document specifies the properties and requirements for demineralized water used as solvent for paints and varnishes industrial applications, e.g. production of electro-deposition coating materials, water-based coating materials, water-based resins and plastics dispersions.
This document is not applicable to water for analytical use.
NOTE See ISO 3696.
|
Published |
2019-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 23322:2021 |
Paints and varnishes — Determination of solvents in coating materials containing organic solvents only — Gas-chromatographic method |
This document specifies a method for the gas-chromatographic determination of the qualitative and quantitative composition of solvents contained in a product. The method is applicable to coating materials containing solely organic solvents (generally called conventional coating materials) and binder solutions and non-aqueous dispersions containing solely organic solvents.
The method defined in this document is not applicable for determination of volatile organic compounds (VOC) and semi-volatile organic compounds (SVOC) content.
NOTE For determination of VOC and SVOC, see ISO 11890-2.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 23497:2019 |
Determination of pH value — Technical buffer solutions for the calibration of technical measuring installations |
This document specifies requirements for technical buffer solutions. These buffer solutions are preferably used for the calibration and adjustment of technical pH measuring equipment as well as pH measuring installations in laboratories. Measuring methods are given to determine pH values and buffer capacities of such buffer solutions based on pH reference buffer solutions in accordance with ISO 23496.
NOTE Annex A gives examples of technical buffer solutions.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 23811:2009 |
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
ISO 23811:2009 specifies a simple practical method for calculating the non-volatile matter by volume, NVV, of a coating material from the non-volatile-matter content, NV, the density of the coating material and the density of the solvents. Using the non-volatile matter by volume results and the density obtained in accordance with ISO 23811:2009, it is possible to calculate the theoretical spreading rate of a coating material.
ISO 23811:2009 is not applicable to coating materials which exceed the critical pigment volume concentration (CPVC).
|
Withdrawn |
2009-02 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO/TR 24430:2003 |
Paints and varnishes — Guidelines for the determination of the precision of a test method by interlaboratory trials |
The purpose of ISO/TR 24430:2003 is:
to give recommendations on how to introduce precision statements into an International Standard which specifies a test method for paints, varnishes, related materials and coatings derived from them;to outline the general principles to be applied when assessing precision in order to establish the procedures which will enable a quantitative estimate to be made;to outline the general principles under which interlaboratory trials should be conducted.
It may be applied to paints, varnishes and related products, to their raw materials in solid, liquid or powder form and to coatings derived from them.
It is concerned only with test methods which operate on a continuous scale to yield a single numerical figure as the test result. However, this single figure may be the outcome of a calculation from a set of measurements. The distribution of test results is required to be unimodal and is assumed to be normal. With non-Gaussian distributions other evaluation procedures will be necessary. It does not cover methods which yield discrete values such as go no-go tests or where a ranking scheme is in operation.
|
Withdrawn |
2003-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 28199-1:2009 |
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels |
ISO 28199-1:2009 defines terms relating to the evaluation of coating materials in research, development and production with regard to their suitability and safety for industrial processes and error analysis.
ISO 28199-1:2009 specifies methods for the preparation of test panels and the subsequent measurement of film thickness, colour and surface texture.
|
Withdrawn |
2009-09 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 28199-1:2009/Cor 1:2009 |
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels — Technical Corrigendum 1 |
|
Withdrawn |
2009-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 28199-1:2021 |
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 1: Vocabulary and preparation of test panels |
This document defines terms relating to the evaluation of coating materials in research, development and production with regard to their suitability and safety for industrial processes and error analysis.
This document also specifies methods for the preparation of test panels and the subsequent measurement of film thickness, colour, surface texture and other measurable surface properties.
|
Published |
2021-03 |
Edition : 2 |
Number of pages : 22 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 28199-2:2009 |
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling |
ISO 28199-2:2009 specifies methods for the determination of colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling of coating materials applied to a test panel under defined conditions.
|
Withdrawn |
2009-09 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 28199-2:2021 |
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling |
This document specifies methods for the determination of colour stability/colour evaluation, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling of coating materials applied to a test panel under defined conditions, using spray application process.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 28199-3:2009 |
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power |
ISO 28199-3:2009 specifies visual methods for the assessment of tendency toward sagging, formation of bubbles, pinholing and hiding power of coating materials applied to a test panel under defined conditions.
|
Withdrawn |
2009-09 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 28199-3:2021 |
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power |
This document specifies visual methods for the assessment of tendency to sagging, formation of bubbles, pinholing and hiding power of coating materials applied to a test panel under defined conditions, using spray application process. Assessment using measuring techniques is also described for all evaluations.
|
Published |
2021-06 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
87.040
Paints and varnishes
|
| ISO 2834-1:2006 |
Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks |
ISO 2834-1:2006 specifies a laboratory method for the preparation of printed samples made with paste inks (such as inks used for lithographic and letterpress printing). Such printed samples are intended to be used for reflection-based measurements, such as colorimetry and reflection density as well as for testing light fastness, and the resistance of printing inks to mechanical and chemical attack regarding either printing ink and/or substrate.
|
Withdrawn |
2006-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2834-1:2020 |
Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks |
This document specifies a test procedure for the preparation of test prints on paper, board, metals, foils and other suitable substrates using paste inks, such as for offset and letterpress printing, using electrically driven IGT-type and prüfbau-type printability testers.
This document describes the procedure for reference optical density and reference ink film thickness.
This document describes the method as used on the current models of testers. Most of the described procedures are also applicable in analogy to the older models but can require additional steps to be executed or recalculation of the settings to make them conform to this document
|
Published |
2020-11 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2834-2:2007 |
Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks |
ISO 2834-2:2007 specifies a test method for preparation of test prints produced with liquid water-based or solvent-based printing inks as used in flexography and gravure printing. These test prints are intended primarily for optical tests, such as colorimetry, transparency and reflection density as described in ISO 2846-3 and ISO 2846-5. They can also be used for testing gloss, light fastness and the chemical, physical and mechanical resistance to mechanical and chemical attack regarding either printing ink and/or substrate. Flexographic inks with higher viscosity, such as those cured by radiation are also covered. ISO 2834-2:2007 is not applicable to inks for ink jet printing.
|
Withdrawn |
2007-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2834-2:2015 |
Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks |
ISO 2834-2:2015 specifies a test method for preparation of test prints produced with liquid water-based or solvent-based printing inks as used in flexography and gravure printing. These test prints are intended primarily for optical tests, such as gloss, colorimetry, transparency and reflection density. They can also be used for testing light fastness and the chemical, physical and mechanical resistance to mechanical and chemical attack regarding either printing ink and/or substrate. Flexographic inks with higher viscosity, such as those cured by radiation, are also covered. This part of ISO 2834 is not applicable to inks for ink jet printing.
|
Withdrawn |
2015-05 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2834-2:2022 |
Graphic technology — Laboratory preparation of test prints — Part 2: Liquid printing inks |
This document specifies a test method for preparation of test prints produced with liquid printing inks, either water-based, solvent-based or radiation cured printing inks as used in flexography and gravure printing. Such test prints are intended to be used for reflection-based measurements, such as colorimetry and optical density as well as for testing light fastness, and the resistance of printing inks to mechanical and chemical attack regarding either printing ink and/or substrate. This document is not applicable to inks for ink jet printing.
|
Published |
2022-12 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2834-3:2008 |
Graphic technology — Laboratory preparation of test prints — Part 3: Screen printing inks |
ISO 2834-3:2008 specifies a test method for preparation of test prints produced with screen printing inks. These test prints are intended primarily for optical tests, such as colorimetry, transparency and reflection density as described in ISO 2846-4. They can also be used for testing gloss, light fastness and the chemical, physical and mechanical resistance to mechanical and chemical attack regarding either printing ink or substrate, or both.
|
Published |
2008-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2834:1981 |
Printing inks — Preparation of standardized prints for determination of resistance to physical and chemical agents |
|
Withdrawn |
1981-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2835:1974 |
Prints and printing inks — Assessment of light fastness |
Is in technical conformity with CEI specification 02-59 of the European Comittee of the Paint and Printing Ink Manufacturers' Associations, and is in agreement with the ISO Recommendations and International Standards on light fastness tests for textiles. Applies to print substrates such as paper, board, metal and plastics, and to all printing processes such as letterpress, litho and gravure. Standard prints shall be prepared according to ISO 2834.
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2836:1974 |
Prints and printing inks — Assessment of resistance to water |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2836:1999 |
Graphic technology — Prints and printing inks — Assessment of resistance to various agents |
|
Withdrawn |
1999-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2836:2004 |
Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents |
ISO 2836:2004 specifies methods of assessing the resistance of printed materials to liquid and solid agents, solvents, varnishes, and acids. It applies to printing on all substrates by all of the traditional printing processes and digital imaging processes, such as ink-jet, electrophotography, etc., using marking materials appropriate to the printing process used.
|
Withdrawn |
2004-03 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2836:2021 |
Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents |
This document specifies methods of assessing the resistance of printed materials to liquid and solid agents, solvents, varnishes and acids.
It applies to printing on all substrates by any of the traditional printing process (offset, screen, gravure, flexo) as well as the newer digital processes (inkjet, electrophotography).
Aspects of food safety and consumer protection for food contact materials are not covered.
|
Published |
2021-05 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2837:1974 |
Prints and printing inks — Assessment of resistance to solvents |
|
Withdrawn |
1974-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2837:1996 |
Graphic technology — Prints and printing inks — Assessment of resistance to solvents |
Describes a method of assessing the resistance of prints and printing inks to solvents. Applies to all printing substrates such as paper, board, metals and plastics and to all printing processes.
|
Withdrawn |
1996-08 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2838:1974 |
Prints and printing inks — Assessment of resistance to alkalis |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2839:1974 |
Prints and printing inks — Assessment of resistance to soaps |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2840:1974 |
Prints and printing inks — Determination of the resistance of prints to detergents |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2841:1974 |
Prints and printing inks — Determination of the resistance of prints to cheese |
|
Withdrawn |
1974-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2842:1974 |
Prints and printing inks — Determination of the resistance of prints to edible oils and fats |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2843:1974 |
Prints and printing inks — Determination of the resistance of prints to impregnation by wax or paraffin wax |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2844:1974 |
Prints and printing inks — Determination of the resistance of prints to spices |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2845:1975 |
Set of printing inks for letterpress printing — Colorimetric characteristics |
|
Withdrawn |
1975-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846-1:1997 |
Graphic technology — Colour and transparency of ink sets for four-colour-printing — Part 1: Sheet-fed and heat-set web offset lithographic printing |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846-1:2006 |
Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing |
ISO 2846-1:2006 specifies the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined. Characteristics are specified for inks used for sheet-fed, heat-set web and radiation-curing processes.
|
Withdrawn |
2006-11 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846-1:2017 |
Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing |
ISO 2846-1:2017 specifies the colour and transparency characteristics that are to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined. Characteristics are specified for inks used for sheet-fed, heat-set web and radiation-curing processes.
ISO 2846-1:2017 does not apply to fluorescent inks and it does not specify pigments (or spectral characteristics ? except informatively) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in this document.
|
Published |
2017-08 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846-2:2000 |
Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 2: Coldset offset lithographic printing |
|
Withdrawn |
2000-04 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846-2:2007 |
Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 2: Coldset offset lithographic printing |
ISO 2846-2:2007 specifies the colour and transparency to be produced by inks intended for four-colour coldset web offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure conformance.
ISO 2846-2:2007 is not applicable to fluorescent inks and does not specify pigments (or spectral reflectance) so as not to preclude the use of suitable future pigment combinations and still claim compliance with its colorimetric requirements.
|
Published |
2007-12 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846-3:2002 |
Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 3: Publication gravure printing |
ISO 2846-3:2002 specifies the colour and transparency to be produced by a process colour ink set including extender intended for four-colour publication gravure printing when printed under specified gravure printing conditions. It also specifies the test method to ensure conformance.
ISO 2846-3:2002 does not specify pigments (or spectral reflectance) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in ISO 2846-3:2002.
NOTE ISO 2846-3:2002 may also apply to certain non-publication gravure applications.
|
Withdrawn |
2002-10 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846-4:2000 |
Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 4: Screen printing |
|
Withdrawn |
2000-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846-5:2005 |
Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 5: Flexographic printing |
ISO 2846-5:2005 specifies the colour and transparency to be produced by each ink in a process colour ink set (including extender) intended for four-colour flexographic printing, when printed under specified flexographic printing conditions. It also describes the conformance test method.
ISO 2846-5:2005 does not specify pigments (or spectral reflectance), in order not to preclude developments that may enable different pigment combinations to be used advantageously, while still achieving the colorimetric requirements specified in this part of ISO 2846.
|
Withdrawn |
2005-03 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 2846:1975 |
Set of printing inks for offset printing — Colorimetric characteristics |
|
Withdrawn |
1975-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 11628:1995 |
Graphic technology — Prints and printing inks — Determination of resistance of prints to acids |
Specifies a method for assessing the resistance of prints to acids. Applicable to all printing processes and all printing substrates such as paper, board, plastics and metals.
|
Withdrawn |
1995-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 12040:1997 |
Graphic technology — Prints and printing inks — Assessment of light fastness using filtered xenon arc light |
|
Published |
1997-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
87.080
Inks. Printing inks
|