| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 12632:2015 |
Graphic technology — Ink, paper and labels — Requirements on hot alkali penetration and resistance |
ISO 12632:2015 specifies test methods for
- penetrability and removal times of labels that have been wet glued on bottles intended to be refilled and reused, and
- resistance of printed labels against hot alkaline solution.
Test results always deal with systems comprising of substrates, ink films and varnish films if present. This International Standard is valid for label substrates and printed labels. Label substrates include metalized papers. The test procedures are also valid for the evaluation of inks and papers to be used in printing labels.
ISO 12632:2015 does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 12634:1996 |
Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter |
Specifies the procedure for determining the tack value of paste inks and vehicles which have low volatility and are unreactiv under normal conditions during the time span required for testing. Contains a description of the rotary tackmeters most commonly used.
|
Withdrawn |
1996-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 12634:2017 |
Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter |
ISO 12634 specifies the test procedure for determining the tack value of neat paste inks and vehicles which have low volatility and are unreactive under normal room conditions during the timespan required for testing.
ISO 12634 contains a basic description of Inkometer® and Inkomat® (Geometry A) and TackOscope® and TackTester® (Geometry B).
|
Published |
2017-09 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 12644:1996 |
Graphic technology — Determination of rheological properties of paste inks and vehicles by the falling rod viscometer |
Contains the procedure for determining the viscosity of paste inks and vehicles which are unreactive under normal room conditions. Applicable to inks in the apparent viscosity range of 2 Pas to 200 Pas.
|
Published |
1996-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO/TS 19857:2021 |
Paper, board and printing inks – Printability – Laboratory test method for offset ink setting |
This document describes a laboratory test method, using an IGT1-type or a prüfbau2-type printability tester, for the preparation of specimens to evaluate the absorption rate of an ink on a substrate in offset lithography by setting-off the printed surface to an unprinted surface.
This method describes testing with an amount of ink simulating either single colour or multi-colour printing. The print and the set-off print (counter print) are made with interval times, between print and set-off, common for the target process.
This method evaluates a particular ink and substrate combination.
1These materials are available from IGT Testing Systems, www.igt.nl. This information is given for the convenience of the users of this document and does not constitute an endorsement by ISO of the products. Equivalent products may be used if they can be shown to lead to the same results.
2These materials are available from prüfbau, Dr.-Ing. H. Dürner GmbH, www.pruefbau.de. This information is given for the convenience of the users of this document and does not constitute an endorsement by ISO of the products. Equivalent products may be used if they can be shown to lead to the same results.
|
Published |
2021-06 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
85.060
Paper and board
;
87.080
Inks. Printing inks
;
37.100.20
Materials for graphic technology
|
| ISO 22934:2021 |
Graphic technology — Communication of offset ink properties |
This document specifies offset ink related properties which are intended to be communicated between ink supplier and the printer, and which are essential for the optimized print production planning and the intended use of the final product.
NOTE The final product is not necessarily the finished print product.
Aspects related to food safety and other safety requirements like children's toys safety are not part of the scope of this document.
|
Published |
2021-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 23498:2020 |
Graphic technology — Visual opacity of printed white ink |
This document specifies a method of measuring the visual opacity of printed specimens of white ink. It is applicable to printing opaque white ink on transparent and white or coloured opaque substrates.
|
Withdrawn |
2020-09 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 23498:2022 |
Graphic technology — Visual opacity of printed white ink |
This document specifies a method of measuring the visual opacity of printed specimens of white ink. It is applicable to printing opaque white ink on transparent and white or coloured opaque substrates.
|
Published |
2022-12 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
87.080
Inks. Printing inks
|
| ISO 16467:2003 |
Packaging — Transport packages for dangerous goods — Test methods for IBCs |
ISO 16467:2003 specifies the design type test requirements for Intermediate Bulk Containers (IBCs) intended for use in the transport of dangerous goods.
|
Withdrawn |
2003-10 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 13274:2013 |
Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs |
ISO 13274:2013 specifies the requirements and test methods for compatibility testing of plastics packagings/Intermediate Bulk Containers (IBCs) and composite packagings/IBCs with plastics inners containing liquids. The testing involves storage with the liquid to be transported. For polyethylene-based packaging, testing with a standard liquid as defined in The European Agreement concerning the International Carriage of Dangerous Goods by Road may be undertaken. Annex B describes small-scale laboratory tests that may be used to determine the assimilation of those products to be carried with the standard liquids.
Where there is any contradiction between ISO 13274:2013 and any applicable regulation, the regulation always takes precendence.
|
Published |
2013-08 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 13274:2013/Cor 1:2014 |
Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs — Technical Corrigendum 1 |
|
Published |
2014-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 16101:2004 |
Packaging — Transport packaging for dangerous goods — Plastics compatibility testing |
ISO 16101:2004 specifies the requirements and test methods for compatibility testing of polyethylene based plastics packagings and composite packagings with plastic inners containing liquids. The testing involves storage with the packaged substance, or with a standard liquid as defined in Annex A. Annex B describes small scale laboratory tests which may be used to determine the assimilation of those products to be carried with the standard liquids.
|
Withdrawn |
2004-09 |
Edition : 1 |
Number of pages : 67 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 16103:2005 |
Packaging — Transport packaging for dangerous goods — Recycled plastics material |
ISO 16103:2005 specifies the requirements and test methods for the production of recycled plastics materials to be used for packagings for the transport of dangerous goods. This includes guidance on the quality assurance programme.
|
Published |
2005-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 16104:2003 |
Packaging — Transport packaging for dangerous goods — Test methods |
ISO 16104:2003 specifies the design type test requirements for packagings intended for use in the transport of dangerous goods.
|
Withdrawn |
2003-05 |
Edition : 1 |
Number of pages : 47 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 16106:2006 |
Packaging — Transport packages for dangerous goods — Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings — Guidelines for the application of ISO 9001 |
ISO 16106:2006 gives guidance on quality management provisions applicable to the manufacture, measuring and monitoring of design type approved dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings.
ISO 16106:2006 can only be used in combination with ISO 9001:2000; it is not a stand-alone document.
It does not apply to design type testing, for which reference is made to 6.1.5, 6.5.4 and 6.6.5 of the United Nations Recommendations on the Transport of Dangerous Goods. Model Regulations, fourteenth revised edition.
|
Withdrawn |
2006-03 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 16106:2020 |
Transport packages for dangerous goods — Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings — Guidelines for the application of ISO 9001 |
This document gives guidance on the application of a quality management system in the manufacture, measuring and monitoring of design type approved dangerous goods packaging, intermediate bulk containers (IBCs) and large packaging.
This document does not include guidance specific to other management systems, such as those for environmental management, occupational health and safety management, or financial management.
It is applicable to an organization that:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements; and
b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the guidance in this document is generic and intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
NOTE In this document, the terms "product" or "service" only apply to products and services intended for, or required by, a customer.
It does not apply to design type testing, for which reference is made to 6.1.5, 6.3.5, 6.5.6 and 6.6.5 of the UN Model Regulations[27].
|
Published |
2020-02 |
Edition : 2 |
Number of pages : 55 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 16495:2013 |
Packaging — Transport packaging for dangerous goods — Test methods |
ISO 16495:2013 specifies the information needed for the design type testing of packaging, Intermediate Bulk Containers ( IBCs) and large packaging intended for use in the transport of dangerous goods.
|
Withdrawn |
2013-08 |
Edition : 1 |
Number of pages : 52 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 16495:2022 |
Packaging — Transport packaging for dangerous goods — Test methods |
This document specifies the information needed for the design type testing of packaging, intermediate bulk containers (IBCs) and large packaging intended for use in the transport of dangerous goods.
NOTE 1 This document can be used in conjunction with one or more of the international regulations set out in the Bibliography.
NOTE 2 The term “packaging” includes packaging for Class 6.2 infectious substances according to the United Nations.
|
Published |
2022-05 |
Edition : 2 |
Number of pages : 44 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 16883:2007 |
Packaging — Transport packages for dangerous goods — Test methods for large packagings |
ISO 16883:2007 specifies the design type test requirements for large packagings intended for use in the transport of dangerous goods.
|
Withdrawn |
2007-06 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 23667:2007 |
Packaging — Transport packaging for dangerous goods — Rigid plastics and plastics composite IBCs — Compatibility testing |
ISO 23667:2006 specifies the requirements and test methods for compatibility testing of polyethylene-based plastics Intermediate Bulk Containers (IBCs) and composite IBCs with plastics inners containing liquids. The testing involves storage with the packaged substance, or with a standard liquid as defined in Annex A. Annex B describes small scale laboratory tests, which may be used to determine the assimilation of those products to be carried with the standard liquids.
|
Withdrawn |
2007-07 |
Edition : 1 |
Number of pages : 82 |
Technical Committee |
13.300
Protection against dangerous goods
;
55.020
Packaging and distribution of goods in general
|
| ISO 4657:2022 |
Assessment specification of coalbed methane resources |
This document specifies the objectives, tasks, work processes, classification, report preparation and acceptance of coalbed methane (CBM) resource evaluation.
|
Published |
2022-01 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO/TR 13352:1997 |
Guidelines for interpretation of ISO 9000 series for application within the iron ore industry |
|
Withdrawn |
1997-06 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
73.020
Mining and quarrying
;
03.120.10
Quality management and quality assurance
|
| ISO 18871:2015 |
Method of determining coalbed methane content |
ISO 18871:2015 provides methodology for measuring coalbed methane content of coal core samples obtained by coring or sidewall coring during well drilling. It shall be also applied to drill cuttings samples, if the equipment for the determination of the coalbed methane content according to a respective national standard is not available. The selection of the most appropriate method shall consider the purpose of the test and the possibilities of sampling.
ISO 18871:2015 is applicable for the direct method of measuring coalbed methane content. It includes sample preparation, experimental procedures and calculation methods. Indirect methods of measuring gas content of coal (not included in this standard) are generally based on either the gas sorption characteristics of coal under defined/specified pressure and temperature conditions.
ISO 18871:2015 includes three types of direct measuring methods: conventional desorption (slow desorption) of core samples, fast desorption of core samples, fast desorption of cuttings or lump samples. The difference among them lies in the time allowed for gas to desorb before final crushing and in sample size and shape.
ISO 18871:2015 is applicable for the determination of the methane content of coal during coal and coalbed methane exploration for the determination of free gas content of low rank coals is included.
|
Published |
2015-09 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 18875:2015 |
Coalbed methane exploration and development — Terms and definitions |
ISO 18875:2015 provides terminology on geology and exploration, engineering construction, field development and production in coalbed methane industry. This International Standard does not contain surface gathering.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO/FDIS 22932-4 |
Mining — Vocabulary — Part 4: Prospecting and exploration |
|
Under development |
|
Edition : 1 |
Number of pages : 46 |
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO 19426-1:2018 |
Structures for mine shafts — Part 1: Vocabulary |
This document specifies the terms and definitions related to the structures for mine shafts, used throughout ISO 19426.
Terms used in mining can vary from conventional engineering usage, and they vary quite considerably between different countries. For this reason, alternative terms are provided in many of the entries. The preferred terms, given in bold type, are those used throughout ISO 19426.
It is assumed that users of this document are familiar with mining, so common terms with normal dictionary usage are not defined. Also, no definitions are provided for terms that can be widely used in mining but are not explicitly used in ISO 19426.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO 19426-2:2018 |
Structures for mine shafts — Part 2: Headframe structures |
This document specifies the design loads and the design procedures for the structural design of headframe structures of mine shafts and their components for permanent and sinking operations. The headframe includes all structures and their foundations, that are required at the head of all vertical and decline mine shafts for the purposes of supporting and installing winding and sinking ropes, conveyance guides, rope guides and rubbing ropes, equipment for loading and unloading conveyances, safety devices, as well as ancillary sinking and maintenance equipment. The headframe also includes the bank and sub-bank levels.
This document does not cover matters of operational safety or layout of the headframe.
This document adopts a limit states design philosophy.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 19426-3:2018 |
Structures for mine shafts — Part 3: Sinking stages |
This document specifies the design loads and the design procedures for the structural design of stages and components of stages.
The loads specified in this document are not applicable for the design of stage ropes or sheaves. Rope sizes are determined in accordance with other standards.
This document does not cover matters of operational safety, or layout of the sinking stage.
This document adopts a limit states design philosophy.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 19426-4:2018 |
Structures for mine shafts — Part 4: Conveyances |
This document specifies the loads, the load combinations and the design procedures for the design of the steel and aluminium alloy structural members of conveyances used for the transport of personnel, materials, equipment and rock in vertical and decline shafts. The conveyances covered by this document include personnel or material cages (or both), skips, kibbles, equipping skeleton cages, inspection cages, bridles, crossheads and counterweights.
This document is not intended to be used for the design of ropes, sheaves or attachments. Rope sizes are determined in accordance with other standards.
This document does not cover chairlifts.
This document does not cover matters of operational safety or layout of conveyances.
This document adopts a limit states design philosophy.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 19426-5:2018 |
Structures for mine shafts — Part 5: Shaft system structures |
This document specifies the loads, the load combinations and the design procedures for the design of shaft system structures in both vertical and decline shafts. The shaft system structures covered by this document include buntons, guides and rails, station structures, rock loading structures, brattice walls, conveyance and vehicle arresting structures and dropsets, services supports, rope guide anchor supports and box fronts.
Rock support is excluded from the scope of this document.
This document does not cover matters of operational safety, or layout of the shaft system structures
This document adopts a limit states design philosophy.
|
Published |
2018-05 |
Edition : 1 |
Number of pages : 38 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 19426-7:2021 |
Structures for mine shafts — Part 7: Rope guides |
This document specifies the design loads and the design procedures for the design of rope guides and rubbing ropes used for guiding conveyances and preventing collisions in vertical mine shafts for permanent operations. It covers personnel and material hoisting, as well as rock hoisting installations. There are no fundamental limitations placed on the size of conveyances, the hoisting speeds, shaft layout configurations, or the shaft depth.
This document can be applicable to shaft sinking operations when kibbles run on the stage ropes.
There are many reasons, based on technical, timing, and cost factors, why rope guides are selected or not for a particular application, following careful assessment at feasibility stage of any project where rope guides are considered. This document provides some comments regarding the advantages and disadvantages of using rope guides compared to rigid guides, and specific design aspects for consideration when using rope guides. However, it is primarily intended to provide the technical information required to ensure good engineering of shafts where rope guided hoisting is the chosen solution.
This document does not cover matters of operational safety.
|
Published |
2021-05 |
Edition : 1 |
Number of pages : 53 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO/FDIS 22932-5 |
Mining — Vocabulary — Part 5: Drilling and blasting |
|
Under development |
|
Edition : 1 |
Number of pages : 51 |
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO 11722:2013 |
Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen |
ISO 11722:2013 specifies a method for determining the moisture in the general analysis test sample of hard coal by drying in nitrogen.
|
Published |
2013-07 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
73.040
Coals
|
| ISO 19434:2017 |
Mining — Classification of mine accidents |
ISO 19434:2017 establishes a classification of mine accidents by their origin or causes, by the type of accident, and by their results or consequences. The latter includes only the accidents resulting into consequences on people, not equipment or machinery.
Different categories of causes, types and consequences of mine accidents are briefly defined, and a 3-digit code is assigned to each category. These can be combined to ultimately allocate a unique 15-digit code to each type of mine accident. This code can then be used in statistical analysis. Similarly, an allocated code clearly shows to which categories of causes, type of accident and resulting consequences the mine accident belongs to.
ISO 19434:2017 is applicable to all surface and underground mines.
NOTE: Accidents can be classified in terms of other items than those given in ISO 19434:2017, especially in researches and in other classification schemes. These can be, e.g. classifications based on the level of financial damages; gender, age, professional skills, terms of service and academic degree of the personnel; days of week, month, year, hour of accident; area of site, etc. While these classifications can be useful to enable certain decisions to be taken by the health and safety executives, they are not considered in ISO 19434:2017.
|
Published |
2017-10 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 19434:2017/Amd 1:2019 |
Mining — Classification of mine accidents — Amendment 1 |
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 20305:2020 |
Mine closure and reclamation — Vocabulary |
This document establishes a vocabulary for mine closure and reclamation management.
|
Published |
2020-09 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO 21795-1:2021 |
Mine closure and reclamation planning — Part 1: Requirements |
This document specifies a framework and the processes involved in mine closure and reclamation planning for new and operating mines. Requirements and recommendations are provided on:
— mine closure and reclamation plan objectives and commitments;
— technical procedures and techniques;
— mitigation of socio-economic impacts;
— financial assurance and associated planning;
— mine closure and reclamation planning for unplanned closure;
— post-closure management plan; and
— mine closure and reclamation plan documentation.
The following aspects of mine closure and reclamation are not addressed in this document:
— infrastructure such as rail lines, ports, off-site ore loaders, power stations, etc. that are associated with the mine operation, but which are not located at the mine site;
— detailed survey, testing or monitoring methods, detailed engineering procedures, detailed product requirements, or detailed construction and operational procedures; occupational health and safety management related to closure and reclamation, construction and exploration activities;
— relinquishment of a closed and reclaimed mine site, or portions thereof, to a party (governmental or private entity) not related to the mine operator;
— specific requirements for dealing with the radiological aspects of mine closure and reclamation, such as those that occur at uranium mining and processing facilities and other mines at which naturally occurring radioactive materials are present; however, the other aspects associated with closure and reclamation of these mines are included in this document; and
— closure and reclamation of abandoned mines.
|
Published |
2021-10 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 21795-2:2021 |
Mine closure and reclamation planning — Part 2: Guidance |
This document provides guidance related to the necessary mine closure and reclamation planning activities for new and operating mines. Recommendations are provided on:
— closure and reclamation of a mine site;
— land reclamation and water management;
— stakeholder engagement;
— decision and analysis tools.
The following aspects of closure and reclamation are not addressed in this document:
— infrastructure such as rail lines, ports, off-site ore loaders, power stations, etc. that are associated with the mine operation, but which are not located at the mine site;
— detailed survey, testing or monitoring methods, detailed engineering procedures, detailed product requirements, or detailed construction and operational procedures; occupational health and safety management related to closure and reclamation, construction and exploration activities;
— relinquishment of a closed and reclaimed mine site, or portions thereof, to a party (governmental or private entity) not related to the mine operator;
— specific requirements for dealing with the radiological aspects of mine closure and reclamation, such as those that occur at uranium mining and processing facilities and other mines at which naturally occurring radioactive materials are present; however, the other aspects associated with closure and reclamation of these mines are included in this document; and
— closure and reclamation of abandoned mines.
|
Published |
2021-10 |
Edition : 1 |
Number of pages : 71 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 22932-1:2020 |
Mining — Vocabulary — Part 1: Planning and surveying |
This document specifies the commonly used terms in mine planning and surveying. Only those terms that have a specific meaning in this field are included.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 61 |
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO 22932-2:2020 |
Mining — Vocabulary — Part 2: Geology |
This document specifies the geologic terms commonly used in mining. Only those terms that have a specific meaning in this field are included.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 45 |
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO/FDIS 22932-3 |
Mining – Vocabulary — Part 3: Rock mechanics |
|
Under development |
|
Edition : 1 |
Number of pages : 41 |
Technical Committee |
73.020
Mining and quarrying
;
01.040.73
Mining and minerals (Vocabularies)
|
| ISO 23664:2021 |
Traceability of rare earths in the supply chain from mine to separated products |
This document specifies requirements for, and gives guidance on, the design and use of a traceability system in a rare earth supply chain. It specifies the information to be recorded by supply chain businesses for rare earth materials or products passing through the supply chain from mine to separated products.
|
Published |
2021-10 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO/CD 23725 |
FMS interface to autonomous haulage |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
73.020
Mining and quarrying
;
35.240.99
IT applications in other fields
|
| ISO 23872:2021 |
Mining structures — Underground structures |
This document specifies the design loads and the design procedures for the design of structures used in underground mines. It covers all steel and concrete structures used in underground mines, irrespective of the depth of the mine or the product being mined.
This document adopts a limit states design philosophy.
Typical underground structures covered by this document include, but are not limited to:
— box front structures at the bottom of rock passes;
— conveyor gantry and transfer structures;
— chairlift support structures;
— crusher support structures;
— fan support structures;
— fixed or retractable arresting structures for ramps (see ISO 19426-5);
— foundations for pumps, fans, winches and underground winders;
— high-pressure bulkheads;
— monorails;
— overhead crane gantries for workshops, pump stations and sub shaft winder chambers;
— settler structures;
— silo bulkhead structures;
— silo structures;
— structures supporting loose rock;
— tip structures, including dump structures;
— underground head frames;
— ventilation control doors and other ventilation structures;
— walls and floors for safety bays, refuge stations and sub-stations;
— water control doors;
— water retaining structures.
This document does not cover matters of operational safety or layout of the underground structures.
|
Published |
2021-12 |
Edition : 1 |
Number of pages : 43 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO 23875:2021 |
Mining — Air quality control systems for operator enclosures — Performance requirements and test methods |
This document specifies performance and design requirements for air quality control systems for operator enclosures and their monitoring devices. The design specifications are universal in their application and do not contemplate specific mining environments. They are intended to meet identified parameters of both pressurization and respirable particulate and carbon dioxide concentrations. This document also specifies test methods to assess such parameters and provides operational and maintenance instructions. Recommendations are made for operational integration of the air quality control system.
Gases and vapours that can be a hazard in the work environment outside of the operator enclosure are excluded from this document.
|
Published |
2021-02 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
73.020
Mining and quarrying
;
13.040.30
Workplace atmospheres
|
| ISO 23875:2021/Amd 1:2022 |
Mining — Air quality control systems for operator enclosures — Performance requirements and test methods — Amendment 1 |
|
Published |
2022-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
73.020
Mining and quarrying
;
13.040.30
Workplace atmospheres
|
| ISO/DIS 24419-1 |
Mine closure and reclamation – Managing mining legacies — Part 1: Requirements and recommendations |
|
Under development |
|
Edition : 1 |
Number of pages : 22 |
Technical Committee |
73.020
Mining and quarrying
|
| ISO/CD TR 24419-2.2 |
Mine closure and reclamation – Managing mining legacies — Part 2: Case studies and bibliography |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
73.020
Mining and quarrying
|
| ISO 157:1975 |
Hard coal — Determination of forms of sulphur |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
73.040
Coals
|
| ISO 157:1996 |
Coal — Determination of forms of sulfur |
Specifies methods of determining the sulfate and pyrite sulfur contents of coals, including brown coals and methods of calculating the amount of organic sulfur present. Replaces the first edition.
|
Published |
1996-06 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
73.040
Coals
|
| ISO 157:1996/Cor 1:1999 |
Coal — Determination of forms of sulfur — Technical Corrigendum 1 |
|
Published |
1999-09 |
Edition : 2 |
|
Technical Committee |
73.040
Coals
|
| ISO/R 158:1960 |
Withdrawal of ISO/R 158-1960 |
|
Withdrawn |
1960-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO/R 159:1960 |
Withdrawal of ISO/R 159-1960 |
|
Withdrawn |
1960-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 331:1983 |
Coal — Determination of moisture in the analysis sample — Direct gravimetric method |
The sample of coal is heated at 105 to 110 °C in a stream of oxygen-free, dry nitrogen and the moisture driven off is collected in an absorption tube containing a desiccant. The increase in mass of the absorption tube (after deducting the result of a separate blank determination) is due to moisture in the sample of coal.
|
Withdrawn |
1983-09 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
73.040
Coals
|
| ISO 332:1981 |
Coal — Determination of nitrogen — Macro Kjeldahl method |
|
Withdrawn |
1981-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
73.040
Coals
|
| ISO 333:1983 |
Coal — Determination of nitrogen — Semi-micro Kjeldahl method |
|
Withdrawn |
1983-09 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
73.040
Coals
|
| ISO 333:1996 |
Coal — Determination of nitrogen — Semi-micro Kjeldahl method |
Specifies a method of determining the nitrogen content of hard coal, brown coal and lignite by the semi-micro Kjeldahl method. Replaces the third edition.
|
Withdrawn |
1996-03 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
|
| ISO 333:1996/Cor 1:1996 |
Coal — Determination of nitrogen — Semi-micro Kjeldahl method — Technical Corrigendum 1 |
|
Withdrawn |
1996-08 |
Edition : 4 |
Number of pages : 1 |
Technical Committee |
73.040
Coals
|
| ISO 334:1975 |
Coal and coke — Determination of total sulphur — Eschka method |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 334:1992 |
Solid mineral fuels — Determination of total sulfur — Eschka method |
The reference method specified is based on igniting a test portion (of hard coal, brown coal, lignite, or coke) in intimate contact with Eschka mixture in an oxidizing atmosphere, removal of combustible matter and conversion of the sulfur to sulfate, extraction of sulfate with hydrochloric acid solution and gravimetric determination by precipitation with barium chloride.
|
Withdrawn |
1992-12 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 334:2013 |
Solid mineral fuels — Determination of total sulfur — Eschka method |
ISO 334:2013 specifies a reference method for determining the total sulfur content of hard coal, brown coals and lignites, and coke by the Eschka method.
|
Withdrawn |
2013-10 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 334:2020 |
Coal and coke — Determination of total sulfur — Eschka method |
This document specifies a reference method for determining the total sulfur content of hard coal, brown coals and lignites, and coke by the Eschka method.
|
Published |
2020-08 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 335:1974 |
Hard coal — Determination of caking power — Roga test |
The caking power of a coal is defined by the mechanical strength of the crucible coke obtained by carbonization under standard conditions of an intimate mixture of 1 g of coal and 5 g of standard anthrazite. The crucible coke obtained is then submitted to a drum test in a strictly prescribed manner and the Roga Index is calculated from the results.
|
Withdrawn |
1974-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
73.040
Coals
|
| ISO 348:1981 |
Hard coal — Determination of moisture in the analysis sample — Direct volumetric method |
|
Withdrawn |
1981-10 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
73.040
Coals
|
| ISO 349:1975 |
Hard coal — Audibert-Arnu dilatometer test |
Specifies a method for determining the swelling properties of hard coal when heated under standard conditions in a dilatometer. In performing the method a pencil made of powdered coal formed under pressure is inserted into a precisely calibrated narrow tube and topped by a calibrated steel rod which slides in the bore of the tube. The whole is heated at a constant and definite rate. By making regular readings of the displacement of the rod as a function of the temperature and expressing the displacements observed as percentages of the original length of the penicl a curve is plotted.
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
73.040
Coals
|
| ISO 349:2020 |
Hard coal — Audibert-Arnu dilatometer test |
This document specifies a method for determining the swelling properties of hard coal when heated under standard conditions in a dilatometer.
|
Published |
2020-01 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
73.040
Coals
|
| ISO/R 350:1963 |
Withdrawal of ISO/R 350-1963 |
|
Withdrawn |
1963-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 351:1996 |
Solid mineral fuels — Determination of total sulfur — High temperature combustion method |
Gives a method of the determination of the total sulfur content of hard coal, brown coal, lignite and coke by a high temperature combustion method. Replaces the second edition.
|
Withdrawn |
1996-02 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 351:1996/Cor 1:1996 |
Solid mineral fuels — Determination of total sulfur — High temperature combustion method — Technical Corrigendum 1 |
|
Withdrawn |
1996-07 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 501:1981 |
Coal — Determination of the crucible swelling number |
The sample is heated in a covered crucible under standard conditions to a final temperature of 820 +- 5 °C. The coke button obtained is classified by comparison with the outlines of a set of standard profiles. The number of the profile most closely corresponding to the coke button obtained is the crucible swelling number. Gas or electrical heating may be used. When using an electrically heated apparatus, the results obtained should be the same (within 1/2 unit) as those obtained by the gas heating method.
|
Withdrawn |
1981-11 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
73.040
Coals
|
| ISO 501:2003 |
Hard coal — Determination of the crucible swelling number |
ISO 501:2003 specifies a method of determining the swelling properties of hard coal when heated in a covered crucible.
|
Withdrawn |
2003-11 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
|
| ISO 501:2012 |
Hard coal — Determination of the crucible swelling number |
ISO 501:2012 specifies a method for determining the swelling properties of hard coal when heated in a covered crucible.
The "crucible swelling number" (CSN) is also known as the "free swelling index" (FSI).
|
Published |
2012-09 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
|
| ISO 502:1982 |
Coal — Determination of caking power — Gray-King coke test |
The sample is heated under standard conditions to a final temperature of 600 C. The coke residue obtained is classified by reference to a series of standard residues. If the coke residue produced is so swollen that it fills the crosssection of the retort tube, the determination is repeated with the coal admixed with a suitable quantity of electrode carbon or equivalent material.
|
Withdrawn |
1982-02 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
73.040
Coals
|
| ISO 502:2015 |
Coal — Determination of caking power — Gray-King coke test |
ISO 502:2015 specifies a method of assessing the caking power of coal under standard conditions.
|
Published |
2015-06 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
73.040
Coals
|
| ISO 540:2008 |
Hard coal and coke — Determination of ash fusibility |
ISO 540:2008 specifies a method of determining the characteristic fusion temperatures of ash from coal and coke.
|
Published |
2008-06 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 562:1981 |
Hard coal and coke — Determination of volatile matter content |
|
Withdrawn |
1981-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 562:1998 |
Hard coal and coke — Determination of volatile matter |
|
Withdrawn |
1998-01 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 562:2010 |
Hard coal and coke — Determination of volatile matter |
ISO 562:2010 specifies a method of determining the volatile matter of hard coal and of coke. It is not applicable to brown coals and lignites.
|
Published |
2010-06 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO/R 586:1967 |
Withdrawal of ISO/R 586-1967 |
|
Withdrawn |
1967-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 589:1981 |
Hard coal — Determination of total moisture |
For all hard coals two methods are specified: A) The sample is heated in a flask under reflux conditions with boiling toluene. The moisture from the coal is entrained by the toluene vapour and carried to a condenser fitted with a graduated receiver. The water then separates in the receiver, to from the lower layer, whilst the excess toluene is returned to the destillation flask by means of an overflow. The moisture in the coal is calculated from the volume of water collected. B) The sample is dried in an oven at a temperature of 105 to 110 °C in a current of nitrogen and the moisture calculated from the loss in mass.
|
Withdrawn |
1981-10 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
73.040
Coals
|
| ISO 589:2003 |
Hard coal — Determination of total moisture |
ISO 589:2003 describes two methods for the determination of the total moisture content of hard coals. Depending on the coal rank, there may be systematic differences between the results obtained by applying different methods on subsamples of the same sample. Methods using a nitrogen atmosphere are suitable for all hard coals; methods with drying in air are only suitable for hard coals not susceptible to oxidation.
|
Withdrawn |
2003-11 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
|
| ISO 589:2008 |
Hard coal — Determination of total moisture |
ISO 589:2008 describes two methods for determination of the total moisture content of hard coals, a two-stage method and a single-stage method. For either method there is a choice between drying in air and drying in a nitrogen atmosphere. Depending on the coal rank, there may be systematic differences between the results obtained by drying in the different atmospheres on subsamples of a sample. Drying in a nitrogen atmosphere is suitable for all hard coals, while drying in air is only suitable for hard coals not susceptible to oxidation.
|
Published |
2008-11 |
Edition : 4 |
Number of pages : 9 |
Technical Committee |
73.040
Coals
|
| ISO 602:1983 |
Coal — Determination of mineral matter |
A sample of the coal is partially demineralized by treatment with hydrochloric and hydrofluoric acids under such conditions that coal substance remains unaffected. The loss in mass of the coal due the acid treatment is recorded and the undissolved part of the mineral matter is determined by ashing the partiallay demineralized coal. The iron copntent of the ash is determined so that the pyrites present in the extracted coal can be calculated. In addition the amount of hydrochloric acid absorbed by the coal substance is determined.
|
Withdrawn |
1983-02 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
73.040
Coals
|
| ISO 602:2015 |
Coal — Determination of mineral matter |
ISO 602:2015 specifies a method of determining the amount of mineral matter in all types of coal, including brown coals and lignites.
|
Published |
2015-04 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
|
| ISO 609:1975 |
Coal and coke — Determination of carbon and hydrogen — High temperature combustion method |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 609:1996 |
Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method |
Specifies a method of the determination of the total carbon and the total hydrogen of hard coal, brown coal, lignite and coke by a high temperature combustion method.
|
Published |
1996-02 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 609:1996/Cor 1:1996 |
Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method — Technical Corrigendum 1 |
|
Published |
1996-07 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 625:1975 |
Coal and coke — Determination of carbon and hydrogen — Liebig method |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 625:1996 |
Solid mineral fuels — Determination of carbon and hydrogen — Liebig method |
Specifies a method of the determination of the total carbon and the total hydrogen of hard coal, brown coal, lignite and coke by the Liebig method.
|
Published |
1996-02 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 625:1996/Cor 1:1996 |
Solid mineral fuels — Determination of carbon and hydrogen — Liebig method — Technical Corrigendum 1 |
|
Published |
1996-07 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 647:1974 |
Brown coals and lignites — Determination of the yields of tar, water, gas and coke residue by low temperature distillation |
The sample is heated in an aluminium retort to a temperatur of 520 °C. The products of decomposition pass into a water-cooled receiver; the tar and water are condensed while gaseous products pass to atmosphere. The coke residue and the receiver and its contents are weighed. The mass of tar is obtained by difference to the mass of water determined by entrainment with toluene or xylene. A separate determination of moisture in the coal, also by entrainment with tulene or xylen, is amde so that the decomposition water can be calculated. The peecentage of gas is obtained by subtracting from 100 the sum of the percentages of coke residue, of tar and decomposition water.
|
Withdrawn |
1974-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
73.040
Coals
|
| ISO 562:1981 |
Hard coal and coke — Determination of volatile matter content |
|
Withdrawn |
1981-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
73.040
Coals
;
75.160.10
Solid fuels
|
| ISO 647:2017 |
Brown coals and lignites — Determination of the yields of tar, water, gas and coke residue by low temperature distillation |
ISO 647:2017 specifies a method for the determination of the yields of tar, water, gas and coke residue obtained from brown coal and lignite by distillation to a final temperature of 520 °C.
|
Published |
2017-07 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
73.040
Coals
|
| ISO 923:1975 |
Coal cleaning tests — Expression and presentation of results |
|
Withdrawn |
1975-12 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
73.040
Coals
|
| ISO 975:1975 |
Brown coals and lignites — Determination of yield of benzene-soluble extract |
|
Withdrawn |
1975-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
73.040
Coals
|
| ISO 975:1985 |
Brown coals and lignites — Determination of yield of toluene-soluble extract |
|
Withdrawn |
1985-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
73.040
Coals
|
| ISO 975:2000 |
Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method |
|
Withdrawn |
2000-10 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
73.040
Coals
|
| ISO 975:2013 |
Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method |
ISO 975:2013 specifies a semi-automatic method for determination of the yield of benzene-soluble extract in brown coals and lignites.
|
Withdrawn |
2013-05 |
Edition : 4 |
Number of pages : 4 |
Technical Committee |
73.040
Coals
|
| ISO 975:2021 |
Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method |
This document specifies a semi-automatic method for determination of the yield of benzene-soluble extract in brown coals and lignites.
|
Published |
2021-12 |
Edition : 5 |
Number of pages : 4 |
Technical Committee |
73.040
Coals
|
| ISO 1015:1975 |
Brown coals and lignites — Determination of moisture content — Direct volumetric method |
|
Withdrawn |
1975-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
73.040
Coals
|