| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 13849-1 |
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
|
Under development |
2023-04 |
Edition : 4 |
|
Technical Committee |
13.110
Safety of machinery
|
| ISO 13849-2:2003 |
Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
ISO 13849-2:2003 specifies the procedures and conditions to be followed for the validation by analysis and testing of:
the safety functions provided andthe category achieved
for the safety-related parts of the control system in compliance with EN 954-1 (ISO 13849-1), using the design rationale provided by the designer.
This International Standard does not give complete validation requirements for programmable electronic systems and therefore can require the use of other standards.
|
Withdrawn |
2003-08 |
Edition : 1 |
Number of pages : 50 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13849-2:2012 |
Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
ISO 13849-2:2012 specifies the procedures and conditions to be followed for the validation by analysis and testing of the specified safety functions, the category achieved, and the performance level achieved by the safety-related parts of a control system (SRP/CS) designed in accordance with ISO 13849-1.
|
Published |
2012-10 |
Edition : 2 |
Number of pages : 79 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/TR 13849-100:2000 |
Safety of machinery — Safety-related parts of control systems — Part 100: Guidelines for the use and application of ISO 13849-1 |
|
Withdrawn |
2000-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 783:1989 |
Metallic materials — Tensile testing at elevated temperature |
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
77.040.10
Mechanical testing of metals
|
| ISO 13850:2006 |
Safety of machinery — Emergency stop — Principles for design |
ISO 13850:2006 specifies functional requirements and design principles for the emergency stop function on machinery, independent of the type of energy used to control the function. It is applicable to all machinery except for machines in which the provision of emergency stop would not lessen the risk, and hand-held portable machines and hand-guided machines. It does not deal with functions such as reversal or limitation of motion, deflection, shielding, braking or disconnecting, which can be part of the emergency stop function.
|
Withdrawn |
2006-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13850:2015 |
Safety of machinery — Emergency stop function — Principles for design |
ISO 13850:2015 Standard specifies functional requirements and design principles for the emergency stop function on machinery, independent of the type of energy used.
It does not deal with functions such as reversal or limitation of motion, deflection of emissions (e.g. radiation, fluids), shielding, braking or disconnecting, which can be part of the emergency stop function.
The requirements for this International Standard apply to all machines, with exception to:
- machines where an emergency stop would not reduce the risk;
- hand-held or hand-operated machines.
NOTE The requirements for the realization of the emergency stop function based on electrical/electronic technology are described in IEC 60204‑1.
|
Published |
2015-11 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13851:2002 |
Safety of machinery — Two-hand control devices — Functional aspects and design principles |
This International Standard specifies the safety requirements of a two-hand control device and the dependency of the output signal from the input signals.
It describes the main characteristics of two-hand control devices for the achievement of safety and sets out combinations of functional characteristics for three types. It does not apply to devices intended to be used as enabling devices, as hold-to-run devices or as special control devices.
This International Standard does not specify with which machines two-hand control devices shall be used. It also does not specify which types of two-hand-control device shall be used. Moreover, it does not specify the distance between the two-hand control device and the danger zone.
This International Standard provides requirements and guidance on the design and selection (based on a risk assessment) of two-hand control devices including their assessment, the prevention of defeat and the avoidance of faults. It also provides requirements and guidance for two-hand control devices containing a programmable electronic system.
This International Standard applies to all two-hand control devices, independent of the energy used, including:
two-hand control devices which are or are not integral parts of a machine; two-hand control devices which consist of one or more than one separate element.
|
Withdrawn |
2002-03 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13851:2019 |
Safety of machinery — Two-hand control devices — Principles for design and selection |
This document specifies the safety requirements of a two-hand control device (THCD) and the dependency of the output signal from the actuation by hand of the control actuating devices.
This document describes the main characteristics of THCDs for the achievement of safety and sets out combinations of functional characteristics for three types. It does not apply to devices intended to be used as enabling devices, as hold-to-run devices or as special control devices.
This document does not specify with which machines THCDs shall be used. It also does not specify which types of two-hand-control device shall be used for a specific application. Moreover, while guidance is given, it does not specify the required distance between the THCD and the danger zone (see 8.8).
This document provides requirements for design and guidance on the selection (based on a risk assessment) of THCDs including the prevention of defeat, the avoidance of faults and verification of compliance.
NOTE 1 A THCD only offers protection for the person using it.
NOTE 2 For specific machines, the suitability of a two-hand control as a suitable protective device can be defined in a type-C standard. If such a standard does not exist or is not appropriate, the risk assessment and determination of suitable protective measures is the responsibility of the manufacturer of the machine.
This document applies to all THCDs, independent of the energy used, including:
— THCDs which are fully assembled for installation;
— THCDs which are assembled by the machine manufacturer or integrator.
This document is not applicable to THCDs manufactured before the date of its publication.
|
Published |
2019-03 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13852:1996 |
Safety of machinery — Safety distances to prevent danger zones being reached by the upper limbs |
Gives values for safety distances to prevent danger zones being reached by the upper limbs of persons of 3 years of age and above without additional aid. The distances apply when adequate safety can be achieved by distances alone.
|
Withdrawn |
1996-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13853:1998 |
Safety of machinery — Safety distances to prevent danger zones being reached by the lower limbs |
|
Withdrawn |
1998-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13854:1996 |
Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
Purpose is to enable the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. Specifies minimum gaps relative to parts of the human body. Applicable when adequate safety can be achieved by this method.
|
Withdrawn |
1996-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13854:2017 |
Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
ISO 13854:2017 enables the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. It specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method.
ISO 13854:2017 is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in.
NOTE For impact, shearing, drawing-in hazards, additional or other measures are to be taken.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13855:2002 |
Safety of machinery — Positioning of protective equipment with respect to the approach speeds of parts of the human body |
This International Standard provides parameters based on values for hand/arm and approach speeds and the methodology to determine the minimum distances from sensing or actuating devices of protective equipment to a danger zone.
These specific devices are:
trip devices as defined in EN 292-1:1991, 3.23.5 (specifically electro-sensitive protective equipment, pressure sensitive mats), including those used additionally to initiate operation;two-hand control devices as defined in EN 292-1:1991, 3.23.4 and covered by ISO 13851.
NOTE For the purposes of this International Standard, hold-to-run controls, which are designed to be actuated with one hand, are not considered to be protective equipment.
This International Standard does not apply to protective equipment which is intended to be moved, without tools, nearer to the danger zone than the calculated distance, e.g. pendant two-hand control devices.
The minimum distances derived from this standard do not apply to protective equipment used to detect the presence of persons within an area already protected by a guard or electro-sensitive protective equipment.
|
Withdrawn |
2002-02 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13855:2010 |
Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body |
ISO 13855:2010 establishes the positioning of safeguards with respect to the approach speeds of parts of the human body.
It specifies parameters based on values for approach speeds of parts of the human body and provides a methodology to determine the minimum distances to a hazard zone from the detection zone or from actuating devices of safeguards.
The values for approach speeds (walking speed and upper limb movement) in ISO 13855:2010 are time tested and proven in practical experience. ISO 13855:2010 gives guidance for typical approaches. Other types of approach, for example running, jumping or falling, are not considered in ISO 13855:2010.
Safeguards considered in ISO 13855:2010 include:
- electro-sensitive protective equipment, including light curtains and light grids (AOPDs), and laser scanners (AOPDDRs) and two-dimensional vision systems;
- pressure-sensitive protective equipment, especially pressure-sensitive mats;
- two-hand control devices;
- interlocking guards without guard locking.
|
Published |
2010-05 |
Edition : 2 |
Number of pages : 40 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/FDIS 13855 |
Safety of machinery — Positioning of safeguards with respect to the approach of the human body |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
13.110
Safety of machinery
|
| ISO 13856-1:2001 |
Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
|
Withdrawn |
2001-08 |
Edition : 1 |
Number of pages : 42 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13856-1:2013 |
Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
ISO 13856-1:2013 establishes general principles and specifies requirements for the design and testing of pressure-sensitive mats and pressure-sensitive floors normally actuated by the feet for use as devices for protecting persons from hazardous machinery. The minimum safety requirements for the performance, marking and documentation are given.
ISO 13856-1:2013 is applicable to pressure-sensitive mats and pressure-sensitive floors, regardless of the type of energy used (e.g. electrical, hydraulic, pneumatic or mechanical), designed to detect
— persons weighing more than 35 kg, and
— persons (e.g. children) weighing more than 20 kg.
It is not applicable to the detection of persons weighing less than 20 kg.
It does not specify the following because they are application-specific:
a) dimensions or configuration of the effective sensing area of pressure-sensitive mat(s) or pressure-sensitive floor(s) in relation to any particular application;
b) when pressure-sensitive mats or floors are appropriate in a particular situation;
c) performance levels (PLs) for safety-related parts of control systems (SRP/CSs) other than providing a minimum level.
ISO 13856-1:2013 gives guidance to assist the user (i.e. machinery manufacturer and/or user of the machinery) in providing an adequate arrangement.
|
Published |
2013-04 |
Edition : 2 |
Number of pages : 49 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13856-2:2005 |
Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars |
ISO 13856-2:2005 specifies the general principles and requirements for the design and testing of pressure-sensitive edges and pressure-sensitive bars for use as safety devices and not as actuating devices for normal operation. It is applicable to pressure-sensitive edges and pressure-sensitive bars, with or without an external reset facility, used to detect persons or parts of persons who may be exposed to danger such as hazardous moving parts. Its purpose relates primarily to safety and reliability rather than suitability.
It is restricted to the functioning of pressure-sensitive edges and pressure-sensitive bars and does not specify the requirements for their application, but does contain requirements for the information for use to be provided by the manufacturer. It does not specify the dimensions of the pressure-sensitive edges or bars in relation to a particular application. It is not applicable to stopping devices according to IEC 60204-1 used only for normal operational, including emergency stopping, of machinery. Additional requirements could be necessary where pressure-sensitive edges and pressure-sensitive bars are used in locations accessible to elderly or disabled people or children.
|
Withdrawn |
2005-02 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/FDIS 19085-4 |
Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 13856-2:2013 |
Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
ISO 13856-2:2012 establishes general principles and specifies requirements for the design and testing of pressure-sensitive edges and pressure-sensitive bars used as safeguards and not as actuating devices for normal operation.
ISO 13856-2:2012 is applicable to pressure-sensitive edges and pressure-sensitive bars, with or without an external reset facility, used to detect persons or body parts that can be exposed to hazards such as those caused by the moving parts of machines.
It is not applicable to determining the suitability of a pressure-sensitive edge or pressure-sensitive bar for a particular safeguarding application, selection of an appropriate performance level for safety-related parts of control systems (SRP/CSs) other than to give minimum values,dimensioning or configuring of the effective sensing area of pressure-sensitive edges or pressure-sensitive bars in relation to any particular application or to stopping devices according to IEC 60204-1 used only for normal operation, including emergency stopping of machinery.
|
Published |
2013-04 |
Edition : 2 |
Number of pages : 55 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13856-3:2006 |
Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
ISO 13856-3:2006 gives basic requirements for those pressure-sensitive protective devices, with or without an external reset facility, that are not specified in either ISO 13856-1 or ISO 13856-2, the majority of which are produced for specific applications and are not available as off-the-shelf items. It also gives specific requirements for pressure-sensitive bumpers, pressure-sensitive plates and pressure-sensitive wires (trip wires).
|
Withdrawn |
2006-10 |
Edition : 1 |
Number of pages : 56 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13856-3:2013 |
Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
ISO 13856-3:2013 establishes general principles and specifies requirements for the design and testing of those pressure-sensitive protective devices, with or without an external reset facility, that are not specified in either ISO 13856‑1 or ISO 13856‑2, and the majority of which are produced for specific applications and are not available as "off-the-shelf" items.
ISO 13856-3:2013 also gives specific requirements for the following pressure-sensitive protective devices: pressure-sensitive bumpers; pressure-sensitive plates; pressure-sensitive wires (trip wires).
It deals with the design of a pressure-sensitive device with regard to safety and reliability rather than its suitability for particular applications.
It is not applicable to specifying the dimensions of pressure-sensitive protective devices in relation to any particular application, or stopping devices according to IEC 60204‑1 used for the normal operation, including emergency stopping of machinery.
While requirements are given for the immunity of the device to electromagnetic disturbances, these are not intended to cover all aspects of electromagnetic compatibility (EMC).
|
Published |
2013-07 |
Edition : 2 |
Number of pages : 56 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13857:2008 |
Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs |
ISO 13857:2007 establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also gives information about distances to impede free access by the lower limbs. It covers people of 14 years and older (the 5th percentile stature of 14 year olds is approximately 1 400 mm). In addition, for upper limbs only, it provides information for children older than 3 years (5th percentile stature of 3 year olds is approximately 900 mm) where reaching through openings needs to be addressed.
|
Withdrawn |
2008-03 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 13857:2019 |
Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs |
This document establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also gives information about distances to impede free access by the lower limbs (see Annex B).
This document covers people of 14 years and older (the 5th percentile stature of 14-year-olds is approximately 1 400 mm). In addition, for upper limbs only, it provides information for children older than 3 years (5th percentile stature of 3-year-olds is approximately 900 mm) where reaching through openings needs to be addressed.
NOTE 1 It is not practical to specify safety distances for all persons. Therefore, the values presented are intended to cover the 95th percentile of the population.
Data for preventing lower limb access for children is not considered.
The distances apply when sufficient risk reduction can be achieved by distance alone. Because safety distances depend on size, some people of extreme dimensions will still be able to reach hazard zones even when the requirements of this document are met.
Compliance with the requirements in this document will prevent access to the hazard zone. Nevertheless the user of this document is advised that it does not provide the required risk reduction for every hazard (e.g. hazards related to machine emissions such as ionizing radiation, heat sources, noise, dust).
The clauses covering lower limbs apply on their own only when access by the upper limbs to the same hazard zone is not foreseeable according to the risk assessment.
The safety distances are intended to protect those persons trying to reach hazard zones under the conditions specified (see 4.1.1).
NOTE 2 This document is not intended to provide measures against reaching a hazard zone by climbing over (see ISO 14120:2015, 5.18).
|
Published |
2019-10 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14118:2000 |
Safety of machinery — Prevention of unexpected start-up |
|
Withdrawn |
2000-09 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 8253-1:1989 |
Acoustics — Audiometric test methods — Part 1: Basic pure tone air and bone conduction threshold audiometry |
Specifies procedures and requirements. For screening purposes only air conduction pure tone audiometric test procedures are described. Procedures and requirements for speech audiometry, electrophysiological audiometry, and where loudspeakers are used as a sound source are not specified.
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 14118:2017 |
Safety of machinery — Prevention of unexpected start-up |
ISO 14118:2017 specifies requirements for designed-in means aimed at preventing unexpected machine start-up (see 3.2) to allow safe human interventions in danger zones (see Annex A).
ISO 14118:2017 applies to unexpected start-up from all types of energy source, i.e.:
- power supply, e.g. electrical, hydraulic, pneumatic;
- stored energy due to, e.g. gravity, compressed springs;
- external influences, e.g. from wind.
ISO 14118:2017 does not specify performance levels or safety integrity levels for safety-related parts of control systems. While available means to prevent unexpected start-up are identified, this document does not specify the means for the prevention of unexpected machine start-up for specific machines.
NOTE A type-C standard can define the required means for the prevention of harm arising from unexpected start-up. Otherwise, the requirements for a specific machine need to be determined by risk assessment outside the scope of this document.
|
Published |
2017-12 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14119:1998 |
Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 42 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14119:1998/Amd 1:2007 |
Safety of machinery — Interlocking devices associated with guards — Principles for design and selection — Amendment 1: Design to minimize defeat possibilities |
|
Withdrawn |
2007-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14119:2013 |
Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
ISO 14119:2013 specifies principles for the design and selection ? independent of the nature of the energy source ? of interlocking devices associated with guards.It covers the parts of guards which actuate interlocking devices. It does not necessarily provide all the specific requirements for trapped key systems.
ISO 14119:2013 provides measures to minimize defeat of interlocking devices in a reasonably foreseeable manner.
|
Published |
2013-10 |
Edition : 2 |
Number of pages : 68 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/FDIS 14119 |
Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
13.110
Safety of machinery
|
| ISO 14120:2002 |
Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards |
|
Withdrawn |
2002-02 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14120:2015 |
Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards |
ISO 14120:2015 specifies general requirements for the design, construction, and selection of guards provided to protect persons from mechanical hazards.
ISO 14120:2015 indicates other hazards that can influence the design and construction of guards.
ISO 14120:2015 applies to guards for machinery which will be manufactured after it is published.
The requirements are applicable if fixed and movable guards are used. This International Standard does not cover interlocking devices. These are covered in ISO 14119.
ISO 14120:2015 does not provide requirements for special systems relating specifically to mobility such as ROPS (rollover protective structures), FOPS (falling-object protective structures), and TOPS (tip over protective structures) or to the ability of machinery to lift loads.
|
Published |
2015-11 |
Edition : 2 |
Number of pages : 35 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14121-1:2007 |
Safety of machinery — Risk assessment — Part 1: Principles |
ISO 14121-1:2007 establishes general principles intended to be used to meet the risk reduction objectives established in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledge and experience of the design, use, incidents, accidents and harm related to machinery in order to assess the risks posed during the relevant phases of the life cycle of a machine.
ISO 14121-1:2007 provides guidance on the information that will be required to enable risk assessment to be carried out. Procedures are described for identifying hazards and estimating and evaluating risk. It also gives guidance on the making of decisions relating to the safety of machinery and on the type of documentation required to verify the risk assessment carried out.
It is not applicable to risks posed to domestic animals, property or the environment.
|
Withdrawn |
2007-09 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/TR 14121-2:2007 |
Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
ISO/TR 14121-2:2007 gives practical guidance on the conducting of risk assessments for machinery in accordance with ISO 14121-1 and describes various methods and tools for each step in the process.
It also provides practical guidance on risk reduction (in accordance with ISO 12100) for machinery, giving additional guidance on the selection of appropriate protective measures for achieving safety.
The intended users of ISO/TR 14121-2:2007 are those involved in the integration of safety into the design, installation or modification of machinery (e.g. designers, technicians, safety specialists).
|
Withdrawn |
2007-12 |
Edition : 1 |
Number of pages : 71 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 15568:1998 |
Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
17.240
Radiation measurements
|
| ISO/TR 14121-2:2012 |
Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
ISO/TR 14121-2:2012 gives practical guidance on conducting risk assessment for machinery in accordance with ISO 12100 and describes various methods and tools for each step in the process. It gives examples of different measures that can be used to reduce risk and is intended to be used for risk assessment on a wide variety of machinery in terms of complexity and potential for harm. Its intended users are those involved in the design, installation or modification of machinery (for example, designers, technicians or safety specialists).
|
Published |
2012-06 |
Edition : 2 |
Number of pages : 38 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14121:1999 |
Safety of machinery — Principles of risk assessment |
|
Withdrawn |
1999-02 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-1:2001 |
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels |
|
Withdrawn |
2001-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-1:2001/Amd 1:2010 |
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels — Amendment 1 |
|
Withdrawn |
2010-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-1:2016 |
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
ISO 14122-1:2016 gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor.
It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access.
NOTE 1 "Fixed" means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
ISO 14122-1:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways, ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.
NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are outside the scope of the standard.
It is intended that this part of ISO 14122 be used with a relevant access-specific part of ISO 14122.
The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.
ISO 14122-1:2016 is not applicable to machinery manufactured before the date of its publication.
For the significant hazards covered by this part of ISO 14122, see Clause 4.
|
Published |
2016-06 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-2:2001 |
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
|
Withdrawn |
2001-05 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-2:2001/Amd 1:2010 |
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways — Amendment 1 |
|
Withdrawn |
2010-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-2:2016 |
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
ISO 14122-2:2016 gives requirements for non-powered working platforms and walkways which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, sliding) and movable parts of those fixed means of access.
NOTE 1 "Fixed" means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
ISO 14122-2:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.
NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are outside the scope of the standard.
It is intended that this part of ISO 14122 be used with ISO 14122‑1 to give the requirements for walking platforms and walkways.
The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.
ISO 14122-2:2016 is not applicable to machinery manufactured before the date of its publication.
|
Published |
2016-06 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-3:2001 |
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
|
Withdrawn |
2001-05 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-3:2001/Amd 1:2010 |
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails — Amendment 1 |
|
Withdrawn |
2010-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 2041:2009 |
Mechanical vibration, shock and condition monitoring — Vocabulary |
ISO 2041:2009 defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring.
|
Withdrawn |
2009-08 |
Edition : 3 |
Number of pages : 46 |
Technical Committee |
17.160
Vibrations, shock and vibration measurements
;
01.040.17
Metrology and measurement. Physical phenomena (Vocabularies)
|
| ISO 14122-3:2016 |
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
ISO 14122-3:2016 gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access.
NOTE 1 "Fixed" means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
ISO 14122-3:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. stairs, stepladders, guard-rails) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.
NOTE 2 Where no local regulation or standards exists, this part of ISO 14122 may be used also for means of access which are outside the scope of the standard.
It is intended that this part of ISO 14122 be used with ISO 14122‑1 to give the requirements for steps, stepladders and guard-rails.
The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.
ISO 14122-3:2016 is not applicable to machinery manufactured before the date of its publication.
|
Published |
2016-06 |
Edition : 2 |
Number of pages : 22 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-4:2004 |
Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
ISO 14122-4:2004 applies to all machinery (stationary and mobile) where fixed means of access are necessary.
The purpose of the standard is to define the general requirements for safe access to machines mentioned in ISO 12100-2. ISO 14122-1 gives advice about the correct choice of access means when the necessary access to the machine is not possible directly from the ground level or from a floor.
The standard applies to fixed ladders which are a part of a machine.
It may also be applied to ladders fixed to that part of the building where the machine is installed, providing the main function of that part of the building is to provide a means of access to the machine.
It also applies to ladders which are not permanently fixed to the machine and which may be removed, moved to the side or pivoted (swivel-mounted) for some operations of the machine (e.g. changing tools in a large press).
|
Withdrawn |
2004-12 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-4:2004/Amd 1:2010 |
Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders — Amendment 1 |
|
Withdrawn |
2010-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14122-4:2016 |
Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
ISO 14122-4:2016 gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems.
NOTE 1 "Fixed" means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
ISO 14122-4:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. fixed ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.
NOTE 2 Where no local regulation or standards exists, this part of ISO 14122 may be used also for means of access which are outside the scope of the standard.
It is intended that this part of ISO 14122 be used with ISO 14122‑1 to give the requirements for fixed ladder systems.
The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.
ISO 14122-4:2016 is not applicable to machinery manufactured before the date of its publication.
|
Published |
2016-06 |
Edition : 2 |
Number of pages : 47 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14123-1:1998 |
Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14123-1:2015 |
Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers |
ISO 14123-1:2015 establishes principles for the control of risks to health resulting from hazardous substances emitted by machinery.
ISO 14123-1:2015 is not applicable to substances that are a hazard to health solely because of their explosive, flammable or radioactive properties or their behaviour at extremes of temperature or pressure.
|
Published |
2015-10 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14123-2:1998 |
Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14123-2:2015 |
Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures |
ISO 14123-2:2015 establishes a methodology that leads to the selection of critical factors relating to emissions of hazardous substances for the purpose of specifying suitable verification procedures.
ISO 14123-2:2015 is intended to be used in conjunction with ISO 14123‑1 and relates specifically to ISO 14123‑1:2015, Clause 8.
|
Published |
2015-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14159:2002 |
Safety of machinery — Hygiene requirements for the design of machinery |
This International Standard specifies hygiene requirements of machines and provides information for the intended use to be provided by the manufacturer. It applies to all types of machines and associated equipment used in applications where hygiene risks to the consumer of the product can occur.
This International Standard does not cover requirements relative to the uncontrolled egress of microbiological agents from the machine.
|
Published |
2002-04 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 14738:2002 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
This International Standard establishes principles for deriving dimensions from anthropometric measurements and applying them to the design of workstations at non-mobile machinery. It is based on current ergonomic knowledge and anthropometric measurements.
This International Standard specifies the body's space requirements for equipment during normal operation in sitting and standing positions. This International Standard does not specifically include space demands for maintenance, repairing and cleaning work.
This International Standard does not give recommendations specifically for visual display terminal workstations at machinery. For this purpose ISO 9241-5 can be used in conjunction with this International Standard.
Situations where people are to be prevented from reaching a hazard are dealt with in ISO 13852.
|
Published |
2002-09 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 14738:2002/Cor 1:2003 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 1 |
|
Published |
2003-12 |
Edition : 1 |
|
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 14738:2002/Cor 2:2005 |
Safety of machinery — Anthropometric requirements for the design of workstations at machinery — Technical Corrigendum 2 |
|
Published |
2005-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO/FDIS 14738 |
Safety of machinery — Anthropometric requirements for the design of workstations for industries and services |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15534-1:2000 |
Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
|
Published |
2000-02 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15534-2:2000 |
Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
This part of ISO 15534 specifies the dimensions of openings for access into machinery as defined in
ISO/TR 12100-1. It provides the dimensions to which the values given in ISO 15534-3 are applicable. Values for
additional space requirements are given in annex A. This part of ISO 15534 has been prepared primarily for nonmobile
machinery; there may be additional specific requirements for mobile machinery.
Dimensions for access openings are based on the values for the 95th percentile, whereas reach distances are
based on the values for the 5th percentile, in each case the least favourable body dimension of the expected user
population being used as a basis. The same considerations apply to the location of access openings.
The anthropometric data given in ISO 15534-3 originate from static measurements of nude persons and do not
take into account body movements, clothing, equipment, machinery-operating conditions or environmental
conditions.
This part of ISO 15534 shows how to combine the anthropometric data with suitable allowances to take these
factors into account.
Situations where people are to be prevented from reaching a hazard are dealt with in ISO 13852.
|
Published |
2000-02 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15534-3:2000 |
Ergonomic design for the safety of machinery — Part 3: Anthropometric data |
This part of ISO 15534 specifies current requirements for human body measurements (anthropometric data) that are
required by ISO 15534-1 and ISO 15534-2 for the calculation of access-opening dimensions as applied to machinery.
The anthropometric data originate from static measurements of nude persons and do not take into account body
movements, clothing, equipment, machinery-operating conditions or environmental conditions.
The data are based on information from anthropometric surveys representative of population groups within Europe
comprising at least three million people. Both men and women are taken into account.
Measurements are given, as required by ISO 15534-1 and ISO 15534-2, for the 5th, 95th and 99th percentiles of the
relevant population group within Europe.
|
Published |
2000-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 7962:1987 |
Mechanical vibration and shock — Mechanical transmissibility of the human body in the z direction |
Standardization is restricted to z-axis vibration for the standing and sitting postures. Currently there is only sufficient information for the head in the frequency range from 0,5 to 31,5 Hz for whole-body vibration entering the torso through the seat or feet.
|
Withdrawn |
1987-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 15537:2004 |
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs |
ISO 15537:2004 establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test.
ISO 15537:2004 is applicable to the testing of anthropometric aspects of industrial products and designs having direct contact with the human body or dependent on human body measurements, e.g. machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces, architectural details or transportation equipment.
ISO 15537:2004 is also applicable to the testing of such safety aspects of products that are dependent on human body measurements. It does not deal with other aspects of the task or other requirements, such as perception of information (except geometrical arrangement of the viewing targets) and the use of controls (except their geometrical placement).
|
Withdrawn |
2004-11 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 15537:2022 |
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs |
This document establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test.
This document is applicable to the testing of anthropometric aspects of industrial products and designs having direct contact with the human body or dependent on human body measurements, such as machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces, architectural details or transportation equipment.
This document is also applicable to the testing of such safety aspects of products that are dependent on human body measurements. It does not deal with other aspects of the task or other requirements, such as perception of information (except geometrical arrangement of the viewing targets) and the use of controls (except their geometrical placement).
Although this document deals with selecting test persons from an anthropometric perspective, similar general principles can be applied for other test variables, e.g. biomechanical aspects.
|
Published |
2022-05 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO 16090-1:2022 |
Machine tools safety — Machining centres, milling machines, transfer machines — Part 1: Safety requirements |
This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of:
— milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2);
— machining centres; and
— transfer machines (see 3.1.3)
designed for continuous production use, which are intended to cut cold metal and other non-combustible cold materials, except wood or materials with physical characteristics similar to those of wood as defined in ISO 19085‑1 and glass, stone and engineered/agglomerated materials as defined in EN 14618.
This document covers the following machines (referred to as "machines" in this document):
a) manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2);
b) manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4);
c) numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5 to C.7);
d) transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8 to C.13).
e) machines fitted with the following devices/facilities, whose hazards have been dealt with:
— tool magazine(s);
— tool changer(s);
— workpiece handling mechanism(s);
— powered workpiece clamping mechanism(s);
— swarf/chip conveyor(s);
— power-operated door(s);
— moveable operator cabin(s);
— additional equipment for turning;
— additional equipment for grinding.
This document deals with all significant hazards, hazardous situations and events relevant to this type of machinery which can occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.
|
Published |
2022-11 |
Edition : 2 |
Number of pages : 155 |
Technical Committee |
13.110
Safety of machinery
;
25.080.01
Machine tools in general
|
| ISO/TR 18569:2004 |
Safety of machinery — Guidelines for the understanding and use of safety of machinery standards |
ISO/TR 18569:2004 provides assistance to the designer or manufacturer of machinery and related equipment on the contents and how to apply the relevant Type A and Type B safety of machinery standards.
It provides an overview which gives a general outline of the basic steps which can assist the manufacturer to declare conformity with the EU Machinery Directive and related standards or apply supporting standards in the case when specific Type C standards do not exist. It provides an outline of the various standards associated with machinery safety.
|
Withdrawn |
2004-05 |
Edition : 1 |
Number of pages : 78 |
Technical Committee |
01.120
Standardization. General rules
;
13.110
Safety of machinery
|
| ISO 19085-1:2017 |
Woodworking machines — Safety — Part 1: Common requirements |
ISO 19085-1:2017 gives the safety requirements and measures to reduce risks related to woodworking machines arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping and which are common to machines used in the woodworking industry. It is applicable to woodworking, stationary and displaceable machines when they are used as intended and under the conditions foreseen by the manufacturer.
NOTE 1 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
ISO 19085-1:2017 is intended to be used in conjunction with the other parts of ISO 19085, applicable to specific machine types.
ISO 19085-1:2017 is not applicable to machines intended for use in potential explosive atmospheres or to machines manufactured prior to the date of its publication.
NOTE 2 Machines for capturing and extracting dust are covered by EN 12779 and EN 16770.
|
Withdrawn |
2017-07 |
Edition : 1 |
Number of pages : 47 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/CD TR 37137-2 |
Biological evaluation of absorbable medical devices — Part 2: Standard guide for absorbable metals |
|
Deleted |
|
Edition : 1 |
|
Technical Committee |
11.040.40
Implants for surgery, prosthetics and orthotics
|
| ISO 19085-1:2021 |
Woodworking machines — Safety — Part 1: Common requirements |
This document gives the safety requirements and measures to reduce risks arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping, related to woodworking machines capable of continuous production use, hereinafter referred as "machines". These safety requirements and measures are those common to most of the machines, when they are used as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too.
The machines are designed to process solid wood and material with similar physical characteristics to wood, with hand feed or integrated feed.
This document is intended to be used in conjunction with the other parts of the ISO 19085 series, applicable to specific machine types. The extent to which all significant hazards of a specific machine type are covered is indicated in the specific part of the ISO 19085 series relevant to that machine type. The hazards covered, at least partly, by the requirements of this document, are listed in Annex A.
It is not applicable to machines intended for use in potential explosive atmospheres or to machines manufactured prior to the date of its publication.
|
Published |
2021-03 |
Edition : 2 |
Number of pages : 47 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-2:2017 |
Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines |
ISO 19085-2:2017 gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the work-piece support, which are manually and/or powered loaded and manually unloaded, hereinafter referred to as "machines".
ISO 19085-2:2017 deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
NOTE For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
ISO 19085-2:2017 is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
- side pressure device;
- device for powered unloading;
- unit for scoring;
- unit for post-formed/soft-formed edge pre-cutting;
- panel turning device;
- front side turn table;
- pushing out device;
- pneumatic clamping of the saw blade;
- powered panel loading device;
- device for grooving by milling tool;
- one or more additional cutting lines inside the machine for longitudinal and/or head cut (before the transversal cutting line);
- work-piece vacuum clamping as part of a front side turn table or of a panel loading device.
The machines are designed for cutting panels consisting of
a) solid wood,
b) material with similar physical characteristics to wood (see ISO 19085‑1:2017, 3.2),
c) gypsum boards, gypsum bounded fibreboards,
d) composite boards made from the materials listed above, and
e) composite materials with core consisting of e.g. polyurethane or mineral material laminated with light alloy.
ISO 19085-2:2017 does not deal with hazards related to
- specific features that differ from the dashed list above,
- the machining of panels with milling tools for grooving,
- powered unloading of panels,
- rear half of split pressure beam on the front cutting line,
- the combination of a single machine being used with any other machine (as part of a line).
ISO 19085-2:2017 is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
|
Withdrawn |
2017-07 |
Edition : 1 |
Number of pages : 35 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-2:2021 |
Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines |
This document gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the workpiece support, which are manually and/or powered loaded and manually unloaded, capable of continuous production use, as defined in 3.1 and hereinafter referred to as “machines”.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
— side pressure device;
— device for powered unloading;
— unit for scoring;
— unit for post-formed/soft-formed edge pre-cutting;
— panel turning device;
— front side turn table;
— pushing out device;
— pneumatic clamping of the saw blade;
— powered panel loading device;
— device for grooving by milling tool;
— one or more additional cutting lines inside the machine for longitudinal and/or head cut (before the transversal cutting line);
— workpiece vacuum clamping as part of a front side turn table or of a panel loading device;
— panel pusher;
— independent panel pushers;
— additional panel pushers mounted on the panel pusher carriage;
— additional panel pusher with integrated label printer device;
— lifting platform;
— device for automatic loading of thin panels;
— device for base board unloading by gravity;
— device for base board powered unloading;
— device for panel unloading in limited space condition;
— loading or pre-loading roller conveyors;
— pressure beam with additional flaps to increase dust extraction efficiency;
— saw blade cooling system by air or water-air or oil-air;
— vibrating conveyor with/without trimming unit for offcuts management;
— predisposition for top loading/unloading by an external system directly on the machine table and/or on the machine preloading roller conveyor and/or on the machine lifting table.
NOTE base board is a support panel underlying the panel stack, to protect the panels from damages during transportation.
The machines are designed for cutting panels consisting of:
a) solid wood;
b) material with similar physical characteristics to wood (see ISO19085‑1:2021, 2);
c) gypsum boards, gypsum bounded fibreboards;
d) composite materials, with core consisting of e.g. polyurethane or mineral material, laminated with light alloy;
e) cardboard;
f) foam board;
g) matrix engineered mineral boards, silicate boards;
h) polymer‐matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials;
i) aluminium light alloy plates with a maximum thickness of 10 mm;
j) composite boards made from the materials listed above.
This document does not deal with hazards related to:
— specific features different from those listed above;
— the machining of panels with milling tools for grooving;
— powered unloading of panels;
— rear half of split pressure beam on the front cutting line;
— the combination of a single machine being used with any other machine (as part of a line).
It is not applicable to:
— machines intended for use in potentially explosive atmospheres;
— machines manufactured prior to the date of its publication.
|
Published |
2021-10 |
Edition : 2 |
Number of pages : 43 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-3:2017 |
Woodworking machines — Safety requirements — Part 3: Numerically controlled (NC) boring and routing machines |
ISO 19085-3:2017 gives the safety requirements and measures for numerically controlled (NC) boring machines, NC routing machines and NC combined boring/routing machines (as defined in 3.1), hereinafter referred to as "machines".
ISO 19085-3:2017 deals with all significant hazards, hazardous situations and events, listed in Clause 4, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
|
Withdrawn |
2017-10 |
Edition : 1 |
Number of pages : 64 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-3:2021 |
Woodworking machines — Safety — Part 3: Numerically controlled (NC/CNC) boring and routing machines |
This document gives the safety requirements and measures for numerically controlled (NC/CNC) boring machines, NC/CNC routing machines and NC/CNC boring and routing machines (as defined in 3.2, 3.3 and 3.4), capable of continuous production use, hereinafter referred to as "machines".
This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
— additional working units for sawing, sanding, assembling or dowel inserting;
— fixed or movable workpiece support;
— mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
— automatic tool change devices.
It is also applicable to machines fitted with edge-banding equipment, even if the relevant specific hazards have not been dealt with.
NOTE For the risk assessment needed for the edge-banding equipment, ISO 19085-17 can be useful.
Machines covered in this document are designed for workpieces consisting of:
— solid wood;
— material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2);
— gypsum boards, gypsum bounded fibreboards, cardboard;
— matrix engineered mineral boards, silicate boards;
— composite materials with core consisting of polyurethane or mineral material laminated with light alloy;
— polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials;
— aluminium light alloy profiles;
— aluminium light alloy plates with a maximum thickness of 10 mm;
— composite boards made from the materials listed above.
This document does not deal with specific hazards related to:
— use of grinding wheels;
— ejection through openings guarded by curtains on machines where the height of the opening in the enclosure above the workpiece support exceeds 700 mm;
— ejection due to failure of milling tools with a cutting circle diameter equal to or greater than 16 mm and sawing tools not conforming to EN 847‑1:2017 and EN 847‑2:2017;
— the combination of a single machine being used with other machines (as a part of a line);
— integrated workpiece loading/unloading systems (e.g. robots).
This document is not applicable to:
— single spindle hand fed or integrated fed routing machines;
— machines intended for use in potentially explosive atmosphere;
— machines manufactured prior to its publication.
|
Published |
2021-11 |
Edition : 2 |
Number of pages : 83 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-4:2018 |
Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines |
ISO 19085-4:2018 gives the safety requirements and measures for manually loaded and unloaded stationary vertical panel sawing machines, hereinafter referred to as "machines".
NOTE 1 In manual loading, the operator puts the work-piece directly onto the work-piece support, with no intermediate loading device to receive and transfer the work-piece from the operator to the cutting position. In manual unloading, the operator removes the work-piece directly from the work-piece support, with no intermediate unloading device to transfer the work-piece from the cutting position to the operator.
ISO 19085-4:2018 deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
ISO 19085-4:2018 is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
- an integrated feed device;
- a device for scoring;
- an angle cutting device;
- a middle support device;
- programmable end stops for parallel vertical cuts;
- a device for grooving with a width of at most 20 mm in one pass by using a milling tool; and
- a panel pusher.
The machines are designed for cutting panels consisting of:
a) solid wood;
b) material with similar physical characteristics to wood (see ISO 19085‑1:2017, 3.2);
c) composite materials with core consisting, for example, of polyurethane or mineral material laminated with light alloy;
d) polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials; and
e) gypsum boards, gypsum bounded fibreboards.
ISO 19085-4:2018 does not apply to machines
- with pressure beam and saw unit mounted behind the work-piece support;
- where the guide rails on which the saw unit moves vertically are fixed on the machine frame and the horizontal cut can only be made by manually feeding the panel;
- designed to cut in vertical direction only;
- which are displaceable;
- automatically performing two or more cutting cycles in sequence;
- intended for use in potentially explosive atmosphere; and
- manufactured before the date of its publication.
|
Published |
2018-02 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-5:2017 |
Woodworking machines — Safety — Part 5: Dimension saws |
ISO 19085-5:2017 gives the safety requirements and measures for stationary and displaceable dimension saws, hereinafter referred to as "machines", designed to cut wood and material with similar physical characteristics to wood.
NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5.
ISO 19085-5:2017 deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100.
ISO 19085-5:2017 is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
- device for the main saw blade and scoring saw blade to be raised and lowered;
- device to tilt the main saw blade and scoring saw blade for angled cutting;
- device for scoring;
- device for grooving with milling tool with a width not exceeding 20 mm;
- demountable power feed unit;
- post-formed edge pre-cutting unit;
- power-operated sliding table;
- workpiece clamping.
NOTE 3 Dimension saws are used for ripping, cross cutting, dimensioning and grooving.
ISO 19085-5:2017 is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
|
Published |
2017-07 |
Edition : 1 |
Number of pages : 50 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/FDIS 19085-5 |
Woodworking machines — Safety — Part 5: Dimension saws |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-6:2017 |
Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines ("toupies") |
ISO 19085-6:2017 gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as "machines", designed to cut wood and materials with similar physical characteristics to wood.
NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5.
It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
|
Published |
2017-11 |
Edition : 1 |
Number of pages : 53 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/FDIS 19085-6 |
Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (toupie) |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-7:2019 |
Woodworking machines — Safety — Part 7: Surface planing, thickness planing, combined surface/thickness planing machines |
This document gives the safety requirements and measures for stationary and displaceable
— surface planing machines, also called jointers,
— thickness planing machines, also called planers or single surface planers,
— combined surface/thickness planing machines
with fixed cutterblock position, with an integrated feed in thicknessing mode, with or without demountable power feed device in planing mode and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The machines are designed to cut solid wood and material with similar physical characteristics to wood.
NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5.
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to these machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100.
It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.
This document does not apply to:
a) machines with more than one cutterblock;
b) machines with mortising unit driven by a separate motor;
c) machines where the cutterblock is adjustable for depth of cut setting in thicknessing mode;
d) machines where the conversion from planing to thicknessing mode or vice versa is achieved by mounting or demounting parts/units;
e) machines where surfacing and thicknessing can be performed on the same section of the cutterblock at the same time;
f) machines intended for use in potentially explosive atmosphere;
g) machines manufactured before the date of its publication as an international standard;
h) displaceable machines with a maximum planing width of ≤330 mm.
NOTE 3 Transportable motor-operated electric tools are dealt with in IEC 62841‑1:2014 and IEC 61029‑2‑3:1993.
|
Published |
2019-06 |
Edition : 1 |
Number of pages : 43 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/DIS 19085-7 |
Woodworking machines — Safety — Part 7: Surface planing, thickness planing, combined surface/thickness planing machines |
This document specifies the safety requirements and measures for
— surface planing machines, also called jointers,
— thickness planing machines, also called planers or single surface planers,
— combined surface/thickness planing machines
with fixed cutter block position, with an integrated feed in thickness planing mode, with or without demountable power feed device in planing mode, with manual loading and/or unloading of the workpiece and capable of continuous production use, hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.
This document does not apply to:
a) machines with more than one cutter block;
b) machines with a mortising unit driven by a separate motor;
c) machines where the cutter block is adjustable for depth of cut setting in thickness planing mode;
d) machines where the conversion from planing to thickness planing mode or vice versa is achieved by mounting or demounting parts/units;
e) machines where surface planing and thickness planing can be performed on the same section of the cutter block at the same time;
f) machines intended for use in potentially explosive atmosphere;
g) machines manufactured prior to the date of its publication as an international standard.
|
Under development |
|
Edition : 2 |
Number of pages : 48 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 15569:1998 |
Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
17.240
Radiation measurements
|
| ISO 19085-8:2017 |
Woodworking machines — Safety — Part 8: Belt sanding and calibrating machines for straight workpieces |
ISO 19085-8:2017 gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the work piece level, with manual or automatic loading and/or unloading, hereinafter referred to as "machines".
ISO 19085-8:2017 deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
NOTE 1 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
ISO 19085-8:2017 is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
- transversal sanding unit;
- cleaning brushing unit;
- satining roller unit;
- disk brushing unit;
- texturing brushing roller unit;
- texturing brushing belt unit;
- cutterblock unit;
- texturing band saw unit;
- spiked roller unit;
- antistatic bars;
- conveyor directly controlled by the machine;
- additional work piece vacuum clamping device.
The machines are designed to calibrate and/or sand work pieces, in shape of panels or beams, consisting of:
a) solid wood;
b) material with similar physical characteristics to wood (see ISO 19085-1:2017, 3.2);
c) gypsum boards, gypsum bounded fibreboards;
d) composite materials with core consisting of e.g. polyurethane or mineral material;
e) composite boards made from the materials listed above;
f) all materials listed above, also already lacquered.
ISO 19085-8:2017 does not deal with hazards related to:
- specific devices other than those listed above;
- access through in-feed and out-feed openings of machines with a work piece height capacity greater than 550 mm;
- systems for automatic loading and/or unloading of the work piece to/from a single machine;
NOTE 2 Loading the machine manually includes manually placing the work piece onto a conveyor directly controlled by the machine. Unloading the machine manually includes manually removing the work piece from a conveyor directly controlled by the machine.
- interfacing of the machine with any other machine.
ISO 19085-8:2017 is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to the date of its publication.
|
Published |
2017-11 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/FDIS 19085-8 |
Woodworking machines — Safety — Part 8: Wide belt sanding machines and surface treating machines |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-9:2019 |
Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table) |
This document gives the safety requirements and measures for stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), also known as "table saws" (in the USA), hereinafter referred to as "machines", designed to cut wood and material with similar physical characteristics to wood.
NOTE 1 For the definition of stationary and displaceable machine, see ISO 19085‑1:2017, 3.4 and 3.5.
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to these machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices, or working unit, whose hazards have been dealt with:
— device for the main saw blade and scoring saw blade to be raised and lowered through the table;
— device to tilt the main saw blade and scoring saw blade for angled cutting;
— device for scoring;
— device for grooving with milling tool with a width not exceeding 20 mm in one pass;
— demountable power feed unit;
— additional manually operated sliding table;
— powered work-piece clamping device.
NOTE 3 Circular saw benches are used for ripping, cross cutting, dimensioning and grooving.
This document does not apply to:
a) transportable/displaceable machines intended for outdoor use on building sites;
NOTE 4 Building site saws (contractor saws) are covered by the requirements of ISO 19085‑10:2018.
b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting;
c) machines intended for use in a potentially explosive atmosphere;
d) machines manufactured before the date of its publication as an International Standard;
e) transportable machines with a maximum saw blade diameter of ≤315 mm.
NOTE 5 Transportable motor-operated electric tools are dealt with in IEC 62841‑1:2014 and IEC 62841‑3‑1:2014.
|
Published |
2019-04 |
Edition : 1 |
Number of pages : 48 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/DIS 19085-9 |
Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table) |
This document specifies the safety requirements and measures for circular saw benches with or without sliding table and/or demountable power feed unit and capable of continuous production use, also known as “table saws” (in the USA), hereinafter referred to also as “machines”.
The machines are designed to cut wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
It is also applicable to machines fitted with one or more of the following devices, or working unit, whose hazards have been dealt with:
— device for the main saw blade and scoring saw blade to be raised and lowered through the table;
— device to tilt the main saw blade and scoring saw blade for angled cutting;
— device for scoring;
— device for grooving with milling tool with a width not exceeding 20 mm in one pass;
— demountable power feed unit;
— additional manually operated sliding table;
— powered workpiece clamping device.
This document does not apply to:
a) machines intended for outdoor use on building sites;
NOTE 1 Building site saws (contractor saws) are covered by the requirements of ISO 19085 10:2018.
b) handheld woodworking machines including any adaptation permitting their use in a different mode, i.e., bench mounting;
c) machines intended for use in a potentially explosive atmosphere;
d) machines manufactured prior to the date of its publication as an International Standard.
|
Under development |
|
Edition : 2 |
Number of pages : 51 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-10:2018 |
Woodworking machines — Safety — Part 10: Building site saws (contractor saws) |
ISO 19085-10:2018 gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as "machines".
NOTE 1 For the definition of displaceable machine, see ISO 19085‑1:2017, 3.5.
ISO 19085-10:2018 deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
The machine can also be fitted with a device for the saw blade to be manually raised and lowered through the table, whose hazards have been dealt with.
This document does not apply to the following:
a) machines with a maximum saw blade diameter smaller than 350 mm or greater than 500 mm;
b) hand-held woodworking machines, including any adaptation permitting their use in a different mode, i.e. bench mounting;
c) machines with a device to tilt the saw blade for angle cutting, machines with more than one saw blade rotational speed and machines equipped with a sliding table;
NOTE 3 Hand-held motor-operated electric tools are covered by IEC 62841‑1 together with IEC 62841‑2‑5.
NOTE 4 Machines with the device to tilt the saw blade for angle cutting, machines with more than one saw blade rotational speed and machines equipped with a sliding table are considered as table saws, covered by ISO 19085‑9.
ISO 19085-10:2018 is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
|
Published |
2018-03 |
Edition : 1 |
Number of pages : 35 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-11:2020 |
Woodworking machines — Safety — Part 11: Combined machines |
This document gives the safety requirements and measures for stationary and displaceable combined woodworking machines, having at least two separately usable working units and with manual loading and unloading of the workpiece, hereinafter referred to as "machines". The integrated working units can be of these types only:
— a sawing unit;
— a moulding unit;
— a planing unit.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5.
This document deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
This document does apply to machines also equipped with the devices/additional working units listed in the Scopes of ISO 19085‑5:2017, ISO 19085‑6:2017, ISO 19085-7:2019 and ISO 19085-9:2019.
This document does not apply to:
a) machines incorporating only a planing unit and a mortising device;
NOTE 3 Such machines are dealt with in ISO 19085-7:2019.
b) combined machines incorporating a band saw unit;
c) machines with a mortising unit with a separate drive other than the planing unit drive;
d) machines intended for use in potentially explosive atmosphere;
e) machines manufactured before the date of its publication as an International Standard.
|
Published |
2020-03 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/DIS 19085-11 |
Woodworking machines — Safety — Part 11: Combined machines |
This document specifies the safety requirements and measures for combined woodworking machines (defined in 3.1), capable of continuous production use, with manual loading and unloading of the workpiece and hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document does apply to machines also equipped with the devices/additional working units listed in the Scopes of ISO 19085 5:202x, ISO 19085 6:202x, ISO 19085-7:202x and ISO 19085-9:202x.
This document does not apply to:
a) machines incorporating only a planing unit and a mortising device;
NOTE Such machines are dealt with in ISO 19085-7:202x.
b) combined machines incorporating a band saw unit;
c) machines with a mortising unit with a separate drive other than the planing unit drive;
d) machines intended for use in potentially explosive atmosphere;
e) machines manufactured before the date of its publication as an International Standard.
|
Under development |
|
Edition : 2 |
Number of pages : 29 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-12:2021 |
Woodworking machines — Safety — Part 12: Tenoning/profiling machines |
This document gives the safety requirements and measures for stationary, manually loaded and unloaded:
— single end tenoning machines with manual feed sliding table;
— single end tenoning machines with mechanical feed sliding table;
— single end tenoning and/or profiling machines with mechanical feed;
— double end tenoning and/or profiling machines with mechanical feed, also designed to be automatically loaded/unloaded;
— angular systems for tenoning and profiling with mechanical feed;
with maximum work-piece height capacity of 200 mm for single end machines and 500 mm for double end machines, hereinafter referred to as "machines".
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
The machines are designed to process in one pass one end or two sides, either opposite or perpendicular to each other, of work-pieces made of:
1) solid wood;
2) materials with similar physical characteristics to wood (see ISO 19085-1:2017, 3.2);
3) fibre-cement, rock/glass wool, gypsum, plasterboard, only with machines with mechanical feed.
It is also applicable to machines fitted with one or more of the following additional working units, whose hazards have been dealt with:
— sanding units;
— fixed or movable work-piece support;
— automatic tool changing;
— automatic work-piece returner;
— glass bead saw unit;
— hinge recessing unit;
— post forming edge pre-cutting;
— boring unit;
— dynamic processing unit;
— sawing unit installed out of the integral enclosure, between machine halves in double end machines;
— foiling unit;
— coating unit;
— grooving unit with milling tool installed out of the integral enclosure, between machine halves;
— brushing unit;
— gluing unit;
— sealing unit;
— dowels inserting unit;
— tongues inserting unit;
— inkjet marking unit;
— laser marking unit;
— labelling unit;
— work-piece back-up device (anti-chipping / anti-splintering device);
— quick tool changing system.
This document does not deal with any hazards related to:
a) systems for automatic loading and unloading of the work-piece to a single machine other than automatic work-piece returner;
b) single machine being used in combination with any other machine (as part of a line);
c) use of tools, other than saw blades or milling tools for grooving, installed between machine halves and out of the integral enclosure in double end machines;
d) use of tools protruding out of the integral enclosure;
e) chemical characteristics of fibre-cement, rock/glass wool, gypsum, plasterboard and their dust.
It is not applicable to machines intended for use in potentially explosive atmosphere nor to machines manufactured prior to its publication.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 53 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/DIS 19085-12 |
Woodworking machines — Safety — Part 12: Tenoning/profiling machines |
This document specifies the safety requirements and measures for manually loaded and unloaded
— single end tenoning machines with manual feed sliding table (defined in 3.1),
— single end tenoning machines with mechanical feed sliding table (defined in 3.2),
— single end tenoning and/or profiling machines with mechanical feed (defined in 3.3),
— double end tenoning and/or profiling machines with mechanical feed (defined in 3.4), also designed to be automatically loaded/unloaded,
— angular systems for tenoning and profiling with mechanical feed (defined in 3.5),
with maximum workpiece height capacity of 200 mm for single end machines and 500 mm for double end machines, capable of continuous production use, altogether referred to as “machines”.
It deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
The machines are designed to process in one pass one end or two sides, either opposite or perpendicular to each other, of workpieces made of:
1) solid wood;
2) materials with similar physical characteristics to wood (see ISO 19085 1:2021, 3.2);
3) fibre-cement, rock/glass wool, gypsum, plasterboard, only with machines with mechanical feed.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
— sanding units;
— fixed or movable workpiece support;
— automatic tool changing;
— automatic workpiece returner;
— glass bead saw unit;
— hinge recessing unit;
— post forming edge pre-cutting;
— boring unit;
— dynamic processing unit;
— sawing unit installed out of the integral enclosure, between machine halves in double end machines;
— foiling unit;
— coating unit;
— grooving unit with milling tool installed out of the integral enclosure, between machine halves;
— brushing unit;
— gluing unit;
— sealing unit;
— dowels inserting unit;
— tongues inserting unit;
— inkjet marking unit;
— laser marking unit;
— labelling unit;
— workpiece back-up device (anti-chipping / anti-splintering device);
— quick tool changing system.
This document does not deal with any hazards related to:
a) systems for automatic loading and unloading of the workpiece to a single machine other than automatic workpiece returner;
b) single machine being used in combination with any other machine (as part of a line);
c) use of tools, other than saw blades or milling tools for grooving, installed between machine halves and out of the integral enclosure in double end machines;
d) use of tools protruding out of the integral enclosure;
e) chemical characteristics of fibre-cement, rock/glass wool, gypsum, plasterboard and their dust.
It is not applicable to machines intended for use in potentially explosive atmosphere nor to machines manufactured prior to its publication.
|
Under development |
|
Edition : 2 |
Number of pages : 56 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-13:2020 |
Woodworking machines — Safety — Part 13: Multi-blade rip sawing machines with manual loading and/or unloading |
This document gives the safety requirements and measures for stationary multi-blade rip sawing machines manually loaded and/or unloaded, hereinafter referred to as "machines", designed to cut solid wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
This document does not deal with specific hazards related to the combination of single machines with any other machine as part of a line.
It is not applicable to machines:
— with all saw blades spindles mounted below the workpiece support/level only;
— intended for use in potentially explosive atmosphere;
— manufactured prior to its publication.
|
Published |
2020-05 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/DIS 19085-13 |
Woodworking machines — Safety — Part 13: Multi-blade rip sawing machines with manual loading and/or unloading |
This document specifies the safety requirements and measures for multi-blade rip sawing machines with manual loading and/or unloading (defined in 3.1) capable of continuous production use, hereinafter referred to also as “machines”, designed to cut solid wood and materials with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account.
This document does not deal with specific hazards related to the combination of single machines with any other machine as part of a line.
It is not applicable to machines:
— with all saw blades spindles mounted below the workpiece support/level only;
— intended for use in potentially explosive atmosphere;
— manufactured prior to its publication.
|
Under development |
|
Edition : 2 |
Number of pages : 44 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 15570:1998 |
Practice for use of cellulose acetate dosimetry system |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
17.240
Radiation measurements
|
| ISO 19085-14:2021 |
Woodworking machines — Safety — Part 14: Four-sided moulding machines |
This document gives the safety requirements and measures for four-sided moulding machines, capable of continuous production use, with a maximum working width of 350 mm and a maximum speed of the integrated workpiece feed of 200 m/min, hereinafter referred to as “machines”, designed to cut solid wood and materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2).
It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
It is also applicable to machines fitted with one or more of the following devices / additional working units, whose hazards have been dealt with:
— universal spindle;
— glass bead saw unit;
— fixed or movable workpiece support;
— quick tool changing system;
— laser marking unit;
— automatic workpiece returner;
— in-feed hopper;
— loading magazine;
— unloading table.
This document does not deal with any hazards related to:
a) in-feed devices other than in-feed hopper and loading magazine;
NOTE 1 For mechanical in-feed devices which also prevent access to the in-feed opening, see 6.6.4.
b) out-feed devices other than unloading table, except for hazards related to ejection from the machine due to climb cutting;
c) out-feed of workpieces on machines with feed speed higher than 60 m/min;
NOTE 2 Machines with feed speed higher than 60 m/min are usually combined with mechanical unloading and workpiece transfer systems.
d) machines being used in combination with any other machine (as part of a line).
It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to its publication.
|
Published |
2021-10 |
Edition : 1 |
Number of pages : 45 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19085-15:2021 |
Woodworking machines — Safety — Part 15: Presses |
This document gives the safety requirements and measures for stationary manually loaded and unloaded:
— cold presses;
— hot presses;
— bending presses;
— edge/face gluing presses;
— membrane presses;
— embossing presses;
where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as "machines".
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a) device for hot gluing;
b) device for high-frequency gluing;
c) device for high-frequency shaping;
d) automatic work-piece loading and unloading system;
e) intermediate additional platens;
f) work-piece extractor;
g) work-piece clamping pressure beam;
h) split moveable platens.
The machines are designed to process work-pieces consisting of:
1) solid wood;
2) materials with similar characteristics to wood (see ISO 19085‑1:2017, 3.2);
3) honeycomb board.
This document does not deal with any hazards related to:
— specific devices that differ from the list above;
— hot fluid heating systems internal to the machine other than electrical;
— any hot fluid heating systems external to the machine;
— operation of taking intermediate platens out and in again;
— the combination of a single machine being used with any other machine (as part of a line).
It is not applicable to:
— frame presses;
— membrane presses where the pressing force is applied by vacuum only;
— presses for producing chipboard, fibreboard, OSB;
— machines intended for use in potentially explosive atmosphere;
— machines manufactured before the date of its publication as an international standard.
|
Published |
2021-10 |
Edition : 1 |
Number of pages : 42 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO/DIS 19085-15 |
Woodworking machines — Safety — Part 15: Presses |
This document gives the safety requirements and measures for stationary:
— cold presses;
— hot presses;
— bending presses;
— edge/face gluing presses;
— membrane presses;
— embossing presses;
where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, capable of continuous production use, hereinafter referred to as "machines".
It deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a) device for hot gluing;
b) device for high-frequency gluing;
c) device for high-frequency shaping;
d) automatic workpiece loading and unloading system;
e) intermediate additional platens;
f) workpiece extractor;
g) workpiece clamping pressure beam;
h) split moveable platens.
The machines are designed to process workpieces consisting of:
1) solid wood;
2) materials with similar characteristics to wood (see ISO 19085 1:2021, 3.2);
3) honeycomb board.
This document does not deal with any hazards related to:
— specific devices that differ from the list above;
— hot fluid heating systems internal to the machine other than electrical;
— any hot fluid heating systems external to the machine;
— operation of taking intermediate platens out and in again;
— the combination of a single machine being used with any other machine (as part of a line).
It is not applicable to:
— frame presses;
— membrane presses where the pressing force is applied by vacuum only;
— presses for producing chipboard, fibreboard, OSB;
— machines intended for use in potentially explosive atmosphere;
— machines manufactured before the date of its publication as an international standard.
|
Under development |
|
Edition : 2 |
Number of pages : 40 |
Technical Committee |
13.110
Safety of machinery
;
79.120.10
Woodworking machines
|
| ISO 19296:2018 |
Mining — Mobile machines working underground — Machine safety |
This document specifies the safety requirements for self-propelled mobile machines used in underground mining, as defined in 3.1.
This document deals with hazards, hazardous situations and hazardous events (see Annex B) relevant to these machines when they are used as intended or under conditions of misuse reasonably foreseeable by the manufacturer.
For utility/service/support machines, this document only includes provisions to address the risks associated with the mobility (movement of the whole machine from one location to another). Risks for the additional functions (e.g. scaling, concrete spraying, bolting, charging, drilling, attachments) are not covered in this document.
This document specifies the appropriate technical measures for eliminating or sufficiently reducing risks arising from hazards, hazardous situations or hazardous events during commissioning, operation and maintenance.
This document does not address:
— the additional risks for machines operating in potentially explosive atmospheres;
— air quality and engine emissions.
This document is not applicable to:
— machines constrained to operate by rails;
— continuous miners, roadheaders, drill rigs, conveyors, long wall production equipment, tunnel boring machines (TBM), and mobile crushers.
|
Published |
2018-11 |
Edition : 1 |
Number of pages : 43 |
Technical Committee |
13.110
Safety of machinery
;
53.100
Earth-moving machinery
;
73.100.99
Other mining equipment
|