| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 15571:1998 |
Practice for dosimetry in a gamma irradiation facility for radiation processing |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
17.240
Radiation measurements
|
| ISO 19353:2005 |
Safety of machinery — Fire prevention and protection |
ISO 19353:2005 specifies methods for identifying fire hazards resulting from machinery and performing a corresponding risk assessment. It gives the basic concepts and methodology of technical fire-prevention and -protection measures to be taken during the machinery's design and construction. Its purpose is the attainment of the required safety level according to the intended use of the machinery by application of technical measures for machinery -- such measures being mainly integrated in the machinery and preferably implemented by the use of safety components. It does not cover machinery designed to contain controlled combustion processes (e.g. internal combustion engines, furnaces), unless those processes could constitute the ignition source of a fire in other parts of the machinery or outside the machine.
|
Withdrawn |
2005-02 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 19353:2015 |
Safety of machinery — Fire prevention and fire protection |
ISO 19353:2015 specifies methods for identifying fire hazards resulting from machinery and for performing a risk assessment.
It gives the basic concepts and methodology of protective measures for fire prevention and protection to be taken during the design and construction of machinery. The measures consider the intended use and reasonably foreseeable misuse of the machine.
It provides guidelines for consideration in reducing the risk of machinery fires to acceptable levels through machine design, risk assessment and operator instructions.
This International Standard is not applicable to
- mobile machinery,
- machinery designed to contain controlled combustion processes (e.g. internal combustion engines, furnaces), unless these processes can constitute the ignition source of a fire in other parts of the machinery or outside of this,
- machinery used in potentially explosive atmospheres and explosion prevention and protection, and
- fire detection and suppression systems that are integrated in building fire safety systems.
It is also not applicable to machinery or machinery components manufactured before the date of its publication.
|
Withdrawn |
2015-12 |
Edition : 2 |
Number of pages : 35 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 19353:2019 |
Safety of machinery — Fire prevention and fire protection |
This document specifies methods for identifying fire hazards resulting from machinery and for performing a risk assessment.
It gives the basic concepts and methodology of protective measures for fire prevention and protection to be taken during the design and construction of machinery. The measures consider the intended use and reasonably foreseeable misuse of the machine.
It provides guidelines for consideration in reducing the risk of machinery fires to acceptable levels through machine design, risk assessment and operator instructions.
This document is not applicable to:
— mobile machinery;
— machinery designed to contain controlled combustion processes (e.g. internal combustion engines, furnaces), unless these processes can constitute the ignition source of a fire in other parts of the machinery or outside of this;
— machinery used in potentially explosive atmospheres and explosion prevention and protection; and
— fire detection and suppression systems that are integrated in building fire safety systems.
It is also not applicable to machinery or machinery components manufactured before the date of its publication.
|
Published |
2019-01 |
Edition : 3 |
Number of pages : 49 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/TS 19837:2018 |
Safety of machinery — Trapped key interlocking devices — Principles for design and selection |
ISO/TS 19837:2018 specifies principles for the design, selection and application of trapped key interlocking devices and systems for machinery applications, independent of the type of energy used to control them or that they control.
The requirements of this document apply to the safety related aspects of trapped key interlocking devices and systems. ISO 14119 always applies unless an exception is given in this document.
ISO/TS 19837:2018 is intended to be used in conjunction with ISO 14119.
ISO/TS 19837:2018 does not provide testing requirements.
NOTE Documents addressing testing requirements can be found in the Bibliography.
|
Published |
2018-03 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 20321:2020 |
Petroleum, petrochemical and natural gas industries — Safety of machineries — Powered elevators |
This document specifies general safety requirements for the design, testing and production of powered elevators. The requirements are applicable for onshore and offshore applications of such elevators in the petroleum and petrochemical industries.
This document does not cover any other type of elevator. It is not applicable to the following types of products:
— remote control devices;
— lifting nubbins;
— lifting plugs;
— lifting subs;
— internal gripping devices;
— equipment for lifting tubular from and onto a vessel;
— elevator links or bails.
This list is not exhaustive.
This document is not applicable to powered elevators manufactured before the date of this publication.
NOTE Annex A provides the relation between the clauses of the European Directive on machinery (Directive 2006/42/EC) and this document, for potential significant hazards and the safety requirements dealing with them for powered elevators.
|
Published |
2020-03 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
13.110
Safety of machinery
;
75.180.10
Exploratory, drilling and extraction equipment
|
| ISO 29042-5:2010 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet |
ISO 29042-5:2010 specifies a test bench method for the measurement of the separation efficiency by mass of an air cleaning system with an unducted outlet, operating under defined conditions. The method is applicable to those systems that clean the air of aerosols (smoke, dust, fume, mist), vapour or gas.
|
Published |
2010-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 20607:2019 |
Safety of machinery — Instruction handbook — General drafting principles |
This document specifies requirements for the machine manufacturer for preparation of the safety-relevant parts of an instruction handbook for machinery.
This document:
— provides further specifications to the general requirements on information for use given in ISO 12100:2010, 6.4.5; and
— deals with the safety-related content, the corresponding structure and presentation of the instruction handbook, taking into account all phases of the life cycle of the machine.
NOTE 1 The strategy for risk reduction at the machine is given in ISO 12100:2010, Clause 6, and includes inherently safe design measures, safeguarding and complementary risk reduction measures as well as information for use.
NOTE 2 Annex A contains a correspondence table between ISO 12100:2010, 6.4, and this document.
NOTE 3 Information for conception and preparation of instructions in general is available in IEC/IEEE 82079-1.
This document establishes the principles which are indispensable to provide information on residual risks.
This document does not address requirements for declaration of noise and vibration emissions.
This document is not applicable to machinery manufactured before the date of its publication.
|
Published |
2019-06 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/CD TR 21260 |
Safety of machinery — Mechanical safety data for physical contacts between moving machinery or moving parts of machinery and persons |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.110
Safety of machinery
|
| ISO 21469:2006 |
Safety of machinery — Lubricants with incidental product contact — Hygiene requirements |
ISO 21469:2006 specifies hygiene requirements for the formulation, manufacture, use and handling of lubricants which, during manufacture and processing, can come into incidental contact (e.g. through heat transfer, load transmission, lubrication or the corrosion protection of machinery) with products and packaging used in the food, food-processing, cosmetics, pharmaceutical, tobacco or animal-feeding-stuffs industries. It is not applicable to substances used as product additives or to those in direct product contact, but confines itself to hygiene without addressing occupational health and safety matters.
|
Published |
2006-02 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.110
Safety of machinery
;
67.020
Processes in the food industry
|
| ISO/TR 22053:2021 |
Safety of machinery — Safeguarding supportive system |
This document provides guidance for the design and integration of a safeguarding supportive system (SSS) which is intended to include a mode selection as part of an SRP/CS or to add a layer of personnel authentication and authorization to an IMS designed according to ISO 11161.
This document is meant to be used in conjunction with ISO 11161.
This document is applicable to the SSS but does not address personnel qualification and competency.
|
Published |
2021-02 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/TR 22100-1:2015 |
Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to type-B and type-C standards |
ISO/TR 22100-1:2015 provides assistance to the designer/manufacturer of machinery and related components as to how the system of existing type-A, type-B and type-C machinery safety standards should be applied in order to design a machine to achieve a level of tolerable risk by adequate risk reduction.
It explains the general principles of ISO 12100 and how this type-A standard should be used for practical cases in conjunction with type-B and type-C machinery safety standards.
ISO/TR 22100-1:2015 provides assistance to standards writing committees on how ISO 12100 and type-B and type-C standards relate and explains their function in the risk assessment and risk reduction process according to ISO 12100.
It includes an overview of existing categories of type-B standards to assist standards readers and writers to navigate the many standards.
|
Withdrawn |
2015-05 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/TR 22100-1:2021 |
Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to type-B and type-C standards |
This document provides assistance to the designer/manufacturer of machinery and related components as to how the system of existing type-A, type-B and type-C machinery safety standards should be applied in order to design a machine to achieve a level of tolerable risk by adequate risk reduction.
This document explains the general principles of ISO 12100 and how this type-A standard is used for practical cases in conjunction with type-B and type-C machinery safety standards.
This document provides assistance to standards-writing committees on how ISO 12100 and type-B and type-C standards relate and explains their function in the risk assessment and risk reduction process according to ISO 12100.
This document includes an overview of existing categories of type-B standards to assist standards readers and writers to navigate the many standards.
|
Published |
2021-01 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/TR 22100-2:2013 |
Safety of machinery — Relationship with ISO 12100 — Part 2: How ISO 12100 relates to ISO 13849-1 |
ISO/TR 22100-2:2013 describes the general relationship between ISO 12100 and ISO 13849‑1 used to reduce the risk of harm. It focuses on the use of safety-related parts of control systems in relation to risk assessment and the risk reduction process.
|
Published |
2013-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 8662-2:1992/Amd 1:1999 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 2: Chipping hammers and riveting hammers — Amendment 1 |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO/TR 22100-3:2016 |
Safety of machinery — Relationship with ISO 12100 — Part 3: Implementation of ergonomic principles in safety standards |
ISO/TR 22100-3:2016 describes the main ergonomic risk factors influencing the safety of machinery and gives a framework for incorporating them into the design of machines by the integration of important ergonomic principles relating to:
- avoiding stressful postures and movements during use of the machine;
- designing machines, and more especially hand-held and mobile machines, which can be operated easily;
- avoiding as far as possible noise, vibration, thermal effects;
NOTE 1: The health effects of noise, vibration and adverse thermal conditions are well-known and are not addressed here. However environmental factors can interact with machine design and risks arising from such influences are addressed in this document.
? avoiding linking the operator's working rhythm to an automatic succession of cycles;
? providing local lighting on or in the machine;
NOTE 2: Lighting of the machine or of the surrounding workplace by the machine can have a significant impact on the safety of machine operation and this risk is addressed by this document.
- selecting, locating and identifying manual controls (actuators) so that they are clearly visible and identifiable and appropriately marked where necessary;
- selecting, designing and locating indicators, dials and visual display units.
The approach is based on ISO 12100 with its iterative process to identify significant hazards and reduce risks.
Relevant steps of this iterative process have been adapted to include ergonomic principles, and practical guidance is given to apply standards dealing with ergonomics which are relevant for machinery design.
ISO/TR 22100-3:2016 is intended for use by standards writers and designers of machinery. It can be used when no relevant C-type standards are available.
|
Published |
2016-10 |
Edition : 1 |
Number of pages : 39 |
Technical Committee |
01.120
Standardization. General rules
;
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO/TR 22100-4:2018 |
Safety of machinery — Relationship with ISO 12100 — Part 4: Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects |
This document gives machine manufacturers guidance on potential security aspects in relation to safety of machinery when putting a machine into service or placing on the market for the first time. It provides essential information to identify and address IT-security threats which can influence safety of machinery.
This document gives guidance but does not provide detailed specifications on how to address IT-security aspects which can influence safety of machinery.
This document does not address the bypass or defeat of risk reduction measures through physical manipulation.
|
Published |
2018-12 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/TR 22100-5:2021 |
Safety of machinery — Relationship with ISO 12100 — Part 5: Implications of artificial intelligence machine learning |
This document addresses how artificial intelligence machine learning can impact the safety of machinery and machinery systems.
This document describes how hazards being associated with artificial intelligence (AI) applications machine learning in machinery or machinery systems, and designed to act within specific limits, can be considered in the risk assessment process.
This document is not applicable to machinery or machinery systems with AI applications machine learning designed to act beyond specified limits that can result in unpredictable effects.
This document does not address safety systems with AI, for example, safety-related sensors and other safety-related parts of control systems.
|
Published |
2021-01 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 23062:2022 |
Foundry machinery — Safety requirements for molding and coremaking machinery and associated equipment |
This document deals with foreseeable significant hazards, hazardous situations and events relevant to molding and coremaking machinery and associated equipment when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 5). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during the life-cycle phases in accordance with ISO 12100:2010, 5.4, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.
This document applies to the following equipment:
a) machinery constructed to condition and/or reclaim foundry sands for mold and coremaking (including related moldable granular materials);
b) molding machinery;
c) coremaking machinery;
d) knock-out equipment;
e) other directly associated equipment.
This document does not apply to:
— ladles and pouring equipment;
NOTE This equipment is covered within the European Union (EU) by EN 1247:2010.
— wax and lost foam pattern production and wax removal equipment;
— additive manufacturing equipment;
— dust and/or gaseous emissions reduction equipment;
— crane installations;
— winches;
— continuous conveyors or handling systems which can be an integral part of the equipment covered by this document;
— sand and casting separation systems.
This document does not explicitly deal with electrical hazards. These hazards are covered by IEC 60204-1: 2016
|
Published |
2022-07 |
Edition : 1 |
Number of pages : 43 |
Technical Committee |
13.110
Safety of machinery
;
77.180
Equipment for the metallurgical industry
;
25.120.30
Moulding equipment
|
| ISO/FDIS 23063 |
Foundry machinery — Safety requirements for high pressure die casting machines |
|
Under development |
|
Edition : 1 |
Number of pages : 45 |
Technical Committee |
13.110
Safety of machinery
;
77.180
Equipment for the metallurgical industry
|
| ISO 29042-6:2010 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet |
ISO 29042-6:2010 specifies a test bench method for the measurement of the separation efficiency by mass of an air cleaning system with a ducted outlet, operating under defined conditions. The method is applicable to those systems that clean the air of aerosols (smoke, dust, fume, mist), vapour or gas.
|
Published |
2010-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 29042-7:2010 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 7: Test bench method for the measurement of the pollutant concentration parameter |
ISO 29042-7:2010 specifies a test bench method for the measurement of the pollutant concentration parameter of a given airborne hazardous substance from a machine, using a test bench under specified operating conditions. The method is applicable only to the determination of emitted gases, vapours and respirable particles.
|
Published |
2010-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 23314-2:2021 |
Ships and marine technology — Ballast water management systems (BWMS) — Part 2: Risk assessment and risk reduction of BWMS using electrolytic methods |
This document provides requirements and recommendations for designers of BWMS using electrolytic methods to document the risk assessment and risk reduction process over the lifecycle of the equipment, and to support its approval for use on ships by administrations and classification societies. Specifically, this document provides basic terminology, principles and a methodology to identify and subsequently minimize the risk of hazards in the design of BWMS using electrolytic methods. It specifies the procedures for risk assessment and risk reduction following the guidance in ISO 12100. Risks considered include: human health and safety; marine environment related to conditions on board; and ship installation, operation, maintenance and structural integrity.
This document does not address the methodology for the risk assessment of corrosion effects, toxicity and ecotoxicity of active substances, relevant chemicals and/or other chemicals generated or used by BWMS using electrolytic methods, which is evaluated by the IMO GESAMP-Ballast Water Working Group as prescribed in the document IMO GESAMP, Methodology for the Evaluation of Ballast Water Management Systems using Active Substances[26].
This document does not address risks associated with the end of life disposition of the BWMS.
|
Published |
2021-11 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
13.110
Safety of machinery
;
47.020.99
Other standards related to shipbuilding and marine structures
|
| ISO/DTR 23474 |
Safety of machinery — Ergonomic principles for the design of sorting cabins intended for the manual sorting of dry household and similar waste originating from selective collection |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.110
Safety of machinery
;
13.180
Ergonomics
|
| ISO/FDIS 23779 |
Shot blasting machinery — safety and environmental requirements |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.110
Safety of machinery
;
77.180
Equipment for the metallurgical industry
|
| ISO/TR 23849:2010 |
Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
ISO/TR 23849:2010 is intended to explain the application of IEC 62061 and ISO 13849-1 in the design of safety-related control systems for machinery.
|
Withdrawn |
2010-05 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/TR 24119:2015 |
Safety of machinery — Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts |
ISO/TR 24119:2015 illustrates and explains principles of fault masking in applications where multiple interlocking devices with potential free contacts (B1 to Bn) are connected in series to one logic unit (K) which does the diagnostics (see Figures 1 to 7). It further provides a guide how to estimate the probability of fault masking and the maximum DC for the involved interlocking devices. This Technical Report only covers interlocking devices in which both channels are physical serial connections.
|
Published |
2015-11 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 29042-1:2008 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods |
ISO 29042-1:2008 specifies parameters which can be used for the assessment of the emission of pollutants from machines or the performance of the pollutant control systems integrated in machines. It gives guidance on the selection of appropriate test methods according to their various fields of application and types of machine including the effects of measures to reduce exposures to pollutants.
|
Published |
2008-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 29042-2:2009 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
ISO 29042-2:2009 specifies a method using tracer gas techniques to enable measurement of the emission rates of gaseous substances from a single machine whose operation can be controlled.
|
Published |
2009-02 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 29042-3:2009 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
ISO 29042-3:2009 specifies a test bench method for the measurement of the emission rate of a given airborne hazardous substance from a machine using a test bench under specified machine operating conditions.
|
Published |
2009-02 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 29042-4:2009 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system |
ISO 29042-4:2009 specifies a method based on a tracer technique for measuring the capture efficiency of an exhaust system installed on a machine. It is applicable to all types of test environment — test bench, room or field (see ISO 29042-1) — but is only applicable if the tracer shows aerodynamic behaviour comparable to that of the real pollutant.
|
Published |
2009-02 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 29042-8:2011 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Room method for the measurement of the pollutant concentration parameter |
ISO 29042-8:2011 specifies a room method for the measurement of the pollutant concentration parameter of a given airborne hazardous substance from machines, located in a test room and operating the machines under defined conditions. This method is applicable only to machines with a local exhaust ventilation with an air flow rate ≥500 m3/h and machines without recirculated air.
Measurement of the pollutant concentration parameter of a machine can serve for the: a) evaluation of the performance of a machine; b) evaluation of the improvement of the machine; c) comparison of machines within different groups of machines with the same intended use (such groups being defined by the function and materials processed); d) ranking of machines from the same group according to their pollutant concentration parameters; e) determination of the state of the art of a machine with respect to its pollutant concentration parameter.
|
Published |
2011-01 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.110
Safety of machinery
|
| ISO 29042-9:2011 |
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Decontamination index |
ISO 29042-9:2011 specifies a method for the measurement of the decontamination index of pollutant control systems, e. g. capture devices including local exhaust ventilation, water spray systems and, when appropriate, separation equipment installed on a machine. This method uses the real pollutant (see ISO 29042-1:2008, 4.2) and can be operated in room or field environments.
Measurement of the decontamination index of a pollutant control system can serve for the: a) evaluation of the performance of a pollutant control system of a machine; b) evaluation of the improvement of a pollutant control system; c) comparison of pollutant control systems for machines of similar design; d) ranking of pollutant control systems according to their decontamination efficiency; e) determination of the air flow rate in the case of an exhaust system to achieve a given level; f) determination of the state of the art of pollutant control systems for machines with respect to the decontamination efficiency.
|
Published |
2011-01 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.110
Safety of machinery
|
| ISO/ASTM DIS 52938-1 |
Additive manufacturing of metals — Environment, health and safety — Part 1: Safety requirements for PBF-LB machines |
|
Under development |
|
Edition : 1 |
Number of pages : 33 |
Technical Committee |
13.100
Occupational safety. Industrial hygiene
;
13.110
Safety of machinery
;
25.030
Additive manufacturing
|
| ISO 10377:2013 |
Consumer product safety — Guidelines for suppliers |
ISO 10377:2013 provides practical guidance to suppliers on assessing and managing the safety of consumer products, including effective documentation of risk assessment and risk management to meet applicable requirements.
ISO 10377:2013 describes how to:
identify, assess, reduce or eliminate hazards;
manage risks by reducing them to tolerable levels;
provide consumers with hazard warnings or instructions essential to the safe use or disposal of consumer products.
ISO 10377:2013 is intended to apply to consumer products, but might also be applicable to decisions concerning safety in other product sectors.
|
Published |
2013-04 |
Edition : 1 |
Number of pages : 46 |
Technical Committee |
13.120
Domestic safety
;
97.020
Home economics in general
;
03.080.30
Services for consumers
|
| ISO 10393:2013 |
Consumer product recall — Guidelines for suppliers |
ISO 10393:2013 provides practical guidance to suppliers on consumer product recalls and other corrective actions after the product has left the manufacturing facility. Other corrective actions include, but are not limited to, refunds, retrofit, repair, replacement, disposal and public notification.
ISO 10393:2013 is intended to apply to consumer products, but might also be applicable to other sectors.
|
Published |
2013-04 |
Edition : 1 |
Number of pages : 39 |
Technical Committee |
13.120
Domestic safety
;
03.080.30
Services for consumers
|
| ISO/IEC Guide 50:1987 |
Child safety and standards — General guidelines |
This Guide establishes basic safety principles for technical bodies preparing national and international standards for products which are intended specifically for use by children; these principles should also apply to products with which children are likely to come into contact. The following aspects are considered: ergonomic considerations, toxicity, flammability and thermal injuries, ingestion and inhalation of foreign bodies, mechanical hazards and construction features, electrical safety, radiation, marking and labelling, packaging, marketing. Annex A includes a list of possible preventive measures for specific types of product-related accidents.
|
Withdrawn |
1987-04 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.120
Standardization. General rules
;
97.190
Equipment for children
|
| ISO 11540:1993 |
Caps for writing and marking instruments intended for use by children up to 14 years of age — Safety requirements |
Specifies safety requirements for cap size, ventilated caps (vent area, air flow) and marking. Annex A describes the test for air flow. Caps which do not comply should have the instrument or its packaging labelled with a warning as to the dangers of asphyxiation from pen caps.
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO/IEC Guide 50:2002 |
Safety aspects — Guidelines for child safety |
This Guide provides a framework for addressing potential sources of unintentional physical harm (hazards) to children from products, processes or services that they use or with which they may come into contact, even if they are not specifically intended for children. The framework aims at minimizing risk of injury to children.
It is primarily intended for those involved in the preparation and revision of standards. However, it has important information that can be useful to, amongst others, designers, architects, manufacturers, service providers, communicators and policy makers.
For children with special needs, additional requirements may be appropriate. This Guide does not claim to address those additional requirements in full. ISO/IEC Guide 71 addresses the neds of persons with disabilities.
A product may include goods, structures, buildings, installations or a combination of these.
No specific guidance is given in this Guide for the prevention or reduction of psychological or moral harm or of intentional injuries.
|
Withdrawn |
2002-05 |
Edition : 2 |
Number of pages : 29 |
Technical Committee |
01.120
Standardization. General rules
;
97.190
Equipment for children
|
| ISO/IEC Guide 50:2014 |
Safety aspects — Guidelines for child safety in standards and other specifications |
ISO/IEC Guide 50:2014 provides guidance to experts who develop and revise standards, specifications and similar publications. It aims to address potential sources of bodily harm to children from products that they use, or with which they are likely to come into contact, even if not specifically intended for children.
ISO/IEC Guide 50:2014 does not provide guidance on the prevention of intentional harm (e.g. child abuse) or non-physical forms of harm, such as psychological harm (e.g. intimidation).
ISO/IEC Guide 50:2014 does not address the economic consequences of the above.
|
Published |
2014-12 |
Edition : 3 |
Number of pages : 36 |
Technical Committee |
01.120
Standardization. General rules
;
97.190
Equipment for children
|
| ISO 7175-2:1988 |
Furniture — Children's cots — Safety requirements and testing — Part 2: Test methods |
|
Withdrawn |
1988-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.140
Furniture
;
97.190
Equipment for children
|
| ISO 8098:1989 |
Cycles — Safety requirements for bicycles for young children |
Specifies for bicycles for young children safety and performance requirements concerning design, assembly and testing of bicycles and bicycles components. Gives guides for their use and maintenance. Applies to bicycles having a saddle height between 435 mm and 635 mm maximum, and a transmitted drive to the rear wheel. Applies to the specified bicycles whether having supporting wheels or not.
|
Withdrawn |
1989-09 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8098:1989/Amd 1:1992 |
Cycles — Safety requirements for bicycles for young children — Amendment 1 |
Replaces subclause 2.2.1.1, amends subclause 2.3.1, and adds new subclauses 2.6.4 (Wheel retention) and 2.6.5 (Quick-release axle mechanisms).
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8098:2002 |
Cycles — Safety requirements for bicycles for young children |
This International Standard specifies safety and performance requirements and test methods for the design, assembly and testing of bicycles for young children of from about four to eight years of age and these bicycles' sub-assemblies. It also provides guidelines for instructions on the use and care of the bicycles.
This International Standard is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm propelled by a transmitted drive to the rear wheel.
It is not applicable to special bicycles intended for stunting (e.g. BMX bicycles).
|
Withdrawn |
2002-08 |
Edition : 2 |
Number of pages : 27 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8098:2014 |
Cycles — Safety requirements for bicycles for young children |
ISO 8098:2014 specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. It also provides guidelines for instructions on the use and care of the bicycles.
ISO 8098:2014 is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm, propelled by a transmitted drive to the rear wheel.
ISO 8098:2014 is not applicable to special bicycles intended for performing stunts (e.g. BMX bicycles).
|
Withdrawn |
2014-06 |
Edition : 3 |
Number of pages : 43 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 8098:2023 |
Cycles — Safety requirements for bicycles for young children |
This document specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. It also provides guidelines for instructions on the use and care of the bicycles.
This document is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm, propelled by a transmitted drive to the rear wheel.
It is not applicable to special bicycles intended for performing stunts (e.g. BMX bicycles).
NOTE For bicycles with a maximum saddle height of 435 mm or less, see national regulations for ride-on toys, and with a maximum saddle height of 635 mm or more, see ISO 4210-1 to ISO 4210-9.
|
Published |
2023-01 |
Edition : 4 |
Number of pages : 43 |
Technical Committee |
43.150
Cycles
;
97.190
Equipment for children
|
| ISO 11540:2014 |
Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation |
ISO 11540:2014 specifies requirements to reduce the risk of asphyxiation from caps for writing and marking instruments. It relates to such instruments which in normal or foreseeable circumstances are likely to be used by children up to the age of 14 years.
ISO 11540:2014 is not applicable to the following: writing and marking instruments which are designed or only intended for use by adults (e.g. jewellery pens, expensive fountain pens, professional technical pens); transit caps for refills.
|
Withdrawn |
2014-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO 11540:2021 |
Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation |
This document specifies requirements to reduce the risk of asphyxiation from caps for writing and marking instruments. It relates to such instruments which in normal or foreseeable circumstances are likely to be used by children up to the age of 14 years.
This document is not applicable to the following:
— writing and marking instruments which are designed or only intended for use by adults, e.g. jewellery pens, expensive fountain pens, professional technical pens;
— transit caps for refills.
|
Published |
2021-08 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO 31110:2020 |
Wheeled child conveyances — Pushchairs and prams — Requirements and test methods |
This document specifies the safety requirements and test methods for pushchairs and prams, intended for the transportation of one or more children up to three years of age.
This document does not apply to toys, pushchairs intended for sport use, pushchairs and prams propelled by a motor, and pushchairs and prams designed for children with special needs.
Other relevant standard(s) can apply if any when a pushchair or pram or any part of the pushchair or pram has several functions or can be converted into another function.
NOTE The average weight of a three-year-old child corresponds to 15 kg.
|
Published |
2020-12 |
Edition : 1 |
Number of pages : 93 |
Technical Committee |
97.190
Equipment for children
|
| ISO 8124-1:2000 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
|
Withdrawn |
2000-04 |
Edition : 1 |
Number of pages : 79 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2000/Amd 1:2007 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 |
|
Withdrawn |
2007-06 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2000/Amd 2:2007 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2 |
|
Withdrawn |
2007-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2009 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
The requirements in ISO 8124-1:2009 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The requirements of ISO 8124-1:2009 specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing, as well as acceptable criteria for properties peculiar to certain categories of toy.
ISO 8124-1:2009 specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. It also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems that may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking.
ISO 8124-1:2009 does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, it has no requirements for those characteristics of toys that represent an inherent and recognized hazard that is integral to the function of the toy
|
Withdrawn |
2009-03 |
Edition : 2 |
Number of pages : 98 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2009/Amd 1:2011 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 |
|
Withdrawn |
2011-12 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2009/Amd 2:2012 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Magnets |
|
Withdrawn |
2012-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-4:2014 |
Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use |
ISO 8124-4:2014 specifies requirements and test methods for activity toys for domestic family use intended for children under 14 years to play on or in.
Products covered by ISO 8124-4:2014 include swings, slides, seesaws, carousels, rocking toys, climbing frames, fully enclosed toddler swing seats and other products intended to bear the mass of one or more children.
Inflatable activity toys are included in the scope of ISO 8124-4:2014.
|
Published |
2014-10 |
Edition : 2 |
Number of pages : 63 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2012 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
The requirements in ISO 8124-1:2012 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The requirements of ISO 8124-1:2012 specify acceptable criteria for structural characteristics of toys, such as shape, size, contour and spacing as well as acceptable criteria for properties peculiar to certain categories of toy.
ISO 8124-1:2012 specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them.
|
Withdrawn |
2012-10 |
Edition : 3 |
Number of pages : 97 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2014 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
The requirements in ISO 8124-1:2014 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The requirements of ISO 8124-1:2014 specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts, sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy (e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys).
ISO 8124-1:2014 specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them.
ISO 8124-1:2014 also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems which may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking.
ISO 8124-1:2014 does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, ISO 8124-1:2014 has no requirements for those characteristics of toys which represent an inherent and recognized hazard which is integral to the function of the toy.
|
Withdrawn |
2014-12 |
Edition : 4 |
Number of pages : 120 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2018 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
The requirements in ISO 8124-1:2018 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The requirements of this document specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts, sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy (e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys).
ISO 8124-1:2018 specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them.
ISO 8124-1:2018 also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems which may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking.
ISO 8124-1:2018 does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, this document has no requirements for those characteristics of toys which represent an inherent and recognized hazard which is integral to the function of the toy.
EXAMPLE 1 An example of such a hazard is the sharp point necessary for the proper function of a needle. The needle is a hazard which is well understood by the purchaser of a toy sewing kit, and the functional sharp-point hazard is communicated to the user as part of the normal educational process of learning to sew as well as at the point of purchase by means of cautionary labelling on the product's packaging.
EXAMPLE 2 As a further example, a two-wheeled toy scooter has inherent and recognized hazards associated with its use (e.g. instability during use, especially while learning). The potential hazards associated with its structural characteristics (sharp edges, pinch hazards, etc.) will be minimized by compliance with the requirements of this document.
|
Withdrawn |
2018-03 |
Edition : 5 |
Number of pages : 150 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2018/Amd 1:2020 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1: Flying toys |
|
Withdrawn |
2020-06 |
Edition : 5 |
Number of pages : 5 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2018/Amd 2:2020 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Various |
|
Withdrawn |
2020-06 |
Edition : 5 |
Number of pages : 9 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2022 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
The requirements in this document apply to all toys, i.e. any product designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise.
The requirements of this document specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts, sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy (e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys).
This document specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them.
This document also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems which may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking.
This document does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, this document has no requirements for those characteristics of toys which represent an inherent and recognized hazard which is integral to the function of the toy.
EXAMPLE 1 An example of such a hazard is the sharp point necessary for the proper function of a needle. The needle is a hazard which is well understood by the purchaser of a toy sewing kit, and the functional sharp-point hazard is communicated to the user as part of the normal educational process of learning to sew as well as at the point of purchase by means of cautionary labelling on the product's packaging.
EXAMPLE 2 As a further example, a two-wheeled toy scooter has inherent and recognized hazards associated with its use (e.g. instability during use, especially while learning). The potential hazards associated with its structural characteristics (e.g. sharp edges, pinch hazards) will be minimized by conformity to the requirements of this document.
Products not included within the scope of this document are:
a) bicycles, except for those considered to be toys, i.e. those having a maximum saddle height of 435 mm (see 1);
b) slingshots;
NOTE 1 “Slingshots” are also known as “catapults” and are usually held in the hand; examples are given in Figure 1. Toy versions of medieval catapults and trebuchets are not exempt from this document; an example is given in Figure 2.
c) darts with metal points;
d) public playground equipment;
e) compressed air- and gas-operated guns and pistols (see 1);
f) kites (except for the electric resistance of their strings, which is included);
g) model kits, hobby and craft items, in which the finished item is not primarily of play value;
h) sporting goods and equipment, camping goods, athletic equipment, musical instruments and furniture; however, toys which are their counterparts are included;
NOTE 2 It is recognized that there is often a fine distinction between, for example, a musical instrument or a sporting item and its toy counterpart. The intention of the manufacturer or distributor, as well as normal use and reasonably foreseeable abuse, determines whether the item is a toy counterpart or not.
i) models of aircraft, rockets, boats and land vehicles powered by combustion engines; however, toys which are their counterparts are included (see 1);
j) collectible products not intended for children under 14 years of age;
k) holiday decorations that are primarily intended for ornamental purposes;
l) aquatic equipment intended to be used in deep water;
m) swimming-learning devices and flotation aids for children, such as swim-seats and swim-aids;
n) toys installed in public places (e.g. arcades and shopping centres);
o) puzzles for specialists, for example those with more than 500 pieces and those without a picture;
p) fireworks, including percussion caps, except percussion caps specifically designed for toys;
q) products containing heating elements intended for use under the supervision of an adult in a teaching context;
r) steam engines;
s) video toys that can be connected to a video screen and operated at a nominal voltage greater than 24 V;
t) babies' pacifiers (dummies);
u) faithful reproductions of firearms;
v) electric ovens, irons or other functional products operated at a nominal voltage greater than 24 V;
w) bows for archery with an overall relaxed length exceeding 120 cm;
x) fashion jewellery for children (see 1).
|
Published |
2022-09 |
Edition : 6 |
Number of pages : 151 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-1:2022/CD Amd 1 |
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 |
|
Under development |
|
Edition : 6 |
|
Technical Committee |
97.200.50
Toys
|
| ISO 8124-2:1994 |
Safety of toys — Part 2: Flammability |
Specifies the categories of flammable materials which are prohibited in all toys and requirements concerning flammability of certain toys when they are submitted to a small source of ignition. Includes general requirements relating to all toys and specific requirements and methods of test relating to following toys which are considered as being those presenting the greatest hazard: beards, moustaches, wigs, masks and other products worn on the head with pile, hair or other attached material; disguise costumes including the associated headgear, and toys intended to be worn by a child; toys intended to be entered by a child, such as a tent; filled soft toys with a pile surface or textile surface but excluding soft-bodied dolls with heads and limbs made entirely from nontextile polymeric material.
|
Withdrawn |
1994-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-2:2007 |
Safety of toys — Part 2: Flammability |
ISO 8124-2:2007 specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition.
The test methods described are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition.
ISO 8124-2:2007 includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard:
toys to be worn on the head: beards, moustaches, wigs, etc., made from hair, pile or material with similar features; molded and fabric masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;
toy disguise costumes and toys intended to be worn by a child in a play;
toys intended to be entered by a child;
soft-filled toys (animals and dolls, etc.) with a piled surface or textile surface.
|
Withdrawn |
2007-06 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-2:2014 |
Safety of toys — Part 2: Flammability |
ISO 8124-2:2014 specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition.
ISO 8124-2:2014 includes general requirements relating to all toys and specific requirements and test methods relating to the following toys, which are considered as being those presenting the greatest hazard:
? toys intended to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material that behaves in a similar manner to hair; masks; hoods, headdresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;
? toy disguise costumes and toys intended to be worn by a child in play;
? toys intended to be entered by a child;
? soft-filled toys.
|
Published |
2014-08 |
Edition : 3 |
Number of pages : 20 |
Technical Committee |
97.200.50
Toys
|
| ISO/PRF 8124-2 |
Safety of toys — Part 2: Flammability |
|
Under development |
2023-05 |
Edition : 4 |
Number of pages : 29 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-3:1997 |
Safety of toys — Part 3: Migration of certain elements |
|
Withdrawn |
1997-04 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-3:2010 |
Safety of toys — Part 3: Migration of certain elements |
ISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to analysis for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys.
Maximum acceptable levels are specified for the migration of the elements listed above from the following toy materials:
coatings of paints, varnishes, lacquers, printing inks, polymers and similar coatings;
polymeric and similar materials, including laminates, whether textile-reinforced or not, but excluding other textiles and non-woven textiles;
paper and paperboard, up to a maximum mass per unit area of 400 g/m2;
natural, artificial or synthetic textiles;
glass/ceramic/metallic materials, excepting lead solder when used for electrical connections;
other materials, whether mass-coloured or not (e.g. wood, fibreboard, hardboard, bone and leather);
materials intended to leave a trace (e.g. the graphite materials in pencils and liquid ink in pens);
pliable modelling materials, including modelling clays and gels;
paints to be used as such in the toy, including finger paints, varnishes, lacquers, glazing powders and similar materials in solid or liquid form.
The requirements in ISO 8124-3:2010 apply to the following toys and toy components of toys and toy materials:
all intended food and oral contact toys, cosmetic toys and writing instruments categorized as toys, irrespective of any age grading or recommended age labelling;
all toys intended for or suitable for children up to 72 months of age;
accessible coatings, irrespective of any age grading or recommended age labelling;
accessible liquids, pastes, gels (e.g. liquid paints, modelling compounds) irrespective of any age grading or recommended age labelling.
|
Withdrawn |
2010-04 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-3:2010/Amd 1:2014 |
Safety of toys — Part 3: Migration of certain elements — Amendment 1 |
|
Withdrawn |
2014-05 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-3:2010/Amd 2:2018 |
Safety of toys — Part 3: Migration of certain elements — Amendment 2 |
|
Withdrawn |
2018-09 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-3:2020 |
Safety of toys — Part 3: Migration of certain elements |
1.1 This document specifies maximum acceptable levels and methods of sampling, extraction and determination for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys.
1.2 Maximum acceptable levels are specified for the migration of the elements listed in 1.1 from the following toy materials:
— coatings of paints, varnishes, lacquers, printing inks, polymers and similar coatings (see 9.1);
— polymeric and similar material, including laminates, whether textile-reinforced or not, but excluding other textiles and non-woven textiles (see 9.2);
— paper and paperboard (see 9.3);
— natural, artificial or synthetic textiles (see 9.4);
— glass/ceramic/metallic materials, excepting lead solder when used for electrical connections (see 9.5);
— other materials, whether mass-coloured or not (e.g. wood, fibreboard, hardboard, bone and leather) (see 9.6);
— materials intended to leave a trace (e.g. the graphite materials in pencils and liquid ink in pens) (see 9.7);
— pliable modelling materials, including modelling clays and gels (see 9.8);
— paints to be used as such in the toy, including finger paints, varnishes, lacquers, glazing powders and similar material in solid or liquid form (see 9.9).
1.3 The requirements in this document apply to the following toys and toy components of toys and toy materials (see D.2.1):
— all intended food and oral contact toys, cosmetic toys and writing instruments categorized as toys, irrespective of any age grading or recommended age labelling;
— all toys intended for or suitable for children under 72 months of age;
— accessible coatings, irrespective of any age grading or recommended age labelling;
— accessible liquids, pastes and gels (e.g. liquid paints, modelling compounds), irrespective of any age grading or recommended age labelling.
1.4 Packaging materials are not included, unless they are intended to be kept, for example boxes and containers, or unless they form part of the toy or have intended play value (see D.2.2).
NOTE No requirements are given for toys and parts of toys which, due to their accessibility, function, mass, size or other characteristics, are obviously unlikely to be sucked, licked or swallowed, bearing in mind the normal and foreseeable behaviour of children (e.g. the coating on the crossbeam of a swing set, the tyres of a toy bicycle).
|
Published |
2020-03 |
Edition : 3 |
Number of pages : 29 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-3:2020/Amd 1:2023 |
Safety of toys — Part 3: Migration of certain elements — Amendment 1: Limits for boron and other elements in slime, and barium in modelling clay |
|
Published |
2023-03 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-4:2010 |
Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use |
ISO 8124‑4:2010 specifies requirements and test methods for activity toys for domestic family use intended for children under fourteen years to play on or in.
Products covered by ISO 8124‑4:2010 include swings, slides, seesaws, carousels, rocking toys, climbing frames, fully enclosed toddler swing seats and other products intended to bear the mass of one or more children.
|
Withdrawn |
2010-04 |
Edition : 1 |
Number of pages : 54 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-4:2010/Amd 1:2012 |
Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 1: Inflatable activity toys |
|
Withdrawn |
2012-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.200.50
Toys
|
| ISO/AWI 8124-4 |
Safety of toys — Part 4: Activity toys for domestic use |
This part of ISO 8124 specifies requirements and test methods for activity toys for domestic family useintended for children under 14 years to play on or in.Products covered by this part of ISO 8124 include swings, slides, seesaws, carousels, rocking toys,climbing frames, fully enclosed toddler swing seats and other products intended to bear the mass of oneor more children.Products not included within the scope of this part of ISO 8124 are:a) fitness and sporting equipment unless attached to the activity toy;b) equipment intended for use in schools, day care centres, kindergartens, public playgrounds,restaurants, shopping centres and similar public places;c) juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds or furnitureincluding picnic tables, cradle rockers and products specifically designed for therapeutic use.Inflatable activity toys are included in the scope of this part of ISO 8124. However, a powered blowerused to continuously inflate the toy is not covered by this part of ISO 8124 since it is considered to be ahousehold appliance and covered by requirements given in IEC 60335-2-80.
|
Under development |
|
Edition : 3 |
|
Technical Committee |
97.200.50
Toys
|
| ISO 8124-5:2015 |
Safety of toys — Part 5: Determination of total concentration of certain elements in toys |
ISO 8124-5:2015 specifies methods of sampling and digestion prior to analysis of the total concentration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury, and selenium from toy materials and from parts of toys.
Digestion methods for the elements mentioned above are specified for the following types of toy materials:
coatings of paints, varnishes, lacquers, printing inks, polymers, and similar coatings;
polymeric and similar materials, including laminates, whether textile-reinforced or not, but excluding other textiles;
paper, paperboard, and cardboard;
natural or synthetic textiles;
metallic materials whether coated or not;
other materials, whether mass-coloured or not (e.g. wood, fibreboard, hardboard, bone, and leather);
materials intended to leave a trace (e.g. the graphite materials in pencils and liquid ink in pens);
pliable modelling materials, including modelling clays and gels;
paints to be used as such in the toy, including finger paints, varnishes, lacquers, and similar materials in solid or liquid form;
packaging materials that form part of the toy or have intended play value.
|
Published |
2015-06 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-6:2014 |
Safety of toys — Part 6: Certain phthalate esters in toys and children's products |
ISO 8124-6:2014 specifies a method for the determination of di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-iso-nonyl phthalate (DINP), and di-iso-decyl phthalate (DIDP) (see Annex A) in toys and children's products.
ISO 8124-6:2014 is applicable to toys and children's products which are made of plastics, textiles, and coatings, etc.
|
Withdrawn |
2014-08 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-6:2018 |
Safety of toys — Part 6: Certain phthalate esters in toys and children's products |
This document specifies a method for the determination of di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-iso-nonylphthalate (DINP) and di-iso-decyl phthalate (DIDP) (as specified in Annex A) in toys and children's products.
This document is applicable to toys and children's products which are made of plastics, textiles, coatings and liquids. This document has been validated for polyvinylchloride (PVC) plastics, polyurethane (PU) plastics and some representative paint coatings (see Annex B). It might also be applicable to other phthalate esters and other product materials provided that adequate validation is demonstrated.
|
Published |
2018-11 |
Edition : 2 |
Number of pages : 32 |
Technical Committee |
97.200.50
Toys
|
| ISO/FDIS 8124-6 |
Safety of toys — Part 6: Certain phthalate esters |
|
Under development |
|
Edition : 3 |
Number of pages : 40 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-7:2015 |
Safety of toys — Part 7: Requirements and test methods for finger paints |
ISO 8124-7:2015 specifies requirements for the substances and materials used in finger paints. It is applicable to finger paints only.
It is not applicable to paints intended to be applied to the face or body e.g. face paints.
Additional requirements are specified for markings, labelling and containers.
|
Published |
2015-10 |
Edition : 1 |
Number of pages : 54 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-7:2015/Amd 1:2020 |
Safety of toys — Part 7: Requirements and test methods for finger paints — Amendment 1 |
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.200.50
Toys
|
| ISO/TR 8124-8:2014 |
Safety of toys — Part 8: Age determination guidelines |
ISO/TR 8124-8:2014 provides guidelines for the determination of the lowest age at which children start playing with toys in specific toy sub-categories and is primarily directed to manufacturers and agencies that evaluate the compliance of toys with safety standards.
ISO/TR 8124-8:2014 can also be used as a reference to determine the appropriateness of toys by earliest age, for use by distributors, institutions, and organizations involved with child play, as well as by paediatric institutions, teachers, other professionals that use toys in their routine activities, and consumers.
|
Withdrawn |
2014-09 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
97.200.50
Toys
|
| ISO 15007-1:2002 |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters |
|
Withdrawn |
2002-03 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.180
Ergonomics
;
43.040.15
Car informatics. On board computer systems
|
| ISO/TR 8124-8:2016 |
Safety of toys — Part 8: Age determination guidelines |
ISO/TR 8124-8:2016 provides guidelines for the determination of the lowest age at which children start playing with toys in specific toy sub-categories and is primarily directed to manufacturers and agencies that evaluate the compliance of toys with safety standards.
This Technical Report can also be used as a reference to determine the appropriateness of toys by earliest age, for use by distributors, institutions, and organizations involved with child play, as well as by paediatric institutions, teachers, other professionals that use toys in their routine activities, and consumers.
The age at which children develop different abilities is unique for each individual child. These guidelines illustrate the age ranges during which a typical child has developed certain abilities.
Although age grading has safety implications, these guidelines are not intended to address specific safety requirements. Specific safety requirements for toys can be found in the ISO 8124 series of toy safety standards (and in other regional toy safety standards and regulations). As an example, such standards will restrict the presence of small parts and small balls in toys intended for certain age groups, due to the choking hazard.
These age determination guidelines are based on the advice of experts and traditional play patterns of children; they might differ from national or regional regulations or directives that classify a toy, or category of toy, as being intended for a different age.
Annex B gives details on how information on electronic toys and electronics in toys was considered in the development of these age determination guidelines.
|
Published |
2016-02 |
Edition : 2 |
Number of pages : 28 |
Technical Committee |
97.200.50
Toys
|
| ISO/WD TR 8124-8 |
Safety of toys — Part 8: Age determination guidelines |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
97.200.50
Toys
|
| ISO/TR 8124-9:2018 |
Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1, and ASTM F963 |
This document consists of a comparison of the mechanical and physical requirements covered by the following toy safety standards:
a) ISO: ISO 8124‑1:2014;
b) Europe (CEN): EN 71‑1:2014;
c) USA: ASTM F963:2011.
|
Withdrawn |
2018-06 |
Edition : 1 |
Number of pages : 100 |
Technical Committee |
97.200.50
Toys
|
| ISO/TR 8124-9:2020 |
Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1 and ASTM F963 |
This document consists of a comparison of the mechanical and physical requirements covered by the following toy safety standards:
a) ISO: ISO 8124‑1:2018;
b) Europe (CEN): EN 71‑1:2014+A1:2018;
c) USA: ASTM F963:2017.
|
Published |
2020-03 |
Edition : 2 |
Number of pages : 124 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-10:2019 |
Safety of toys — Part 10: Experimental sets for chemistry and related activities |
This document specifies requirements for the maximum amount and, in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
— those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[1];
— substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; and
— any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities, including crystal-growing sets, carbon-dioxide-generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science, whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to the GHS[1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and the equipment intended for carrying out the experiments.
Requirements for certain other chemical toys are given in ISO 8124-11.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
97.200.50
Toys
|
| ISO 8124-10 |
Safety of toys — Part 10: Experimental sets for chemistry and related activities |
|
Under development |
2023-05 |
Edition : 2 |
|
Technical Committee |
97.200.50
Toys
|
| ISO 8124-11:2019 |
Safety of toys — Part 11: Chemical toys (sets) other than experimental sets |
This document specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
— those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[1];
— substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; and
— any other chemical substance(s) and mixture(s) delivered with the chemical toy.
Additionally, requirements are specified for markings, warnings, safety rules, contents lists, instructions for use and first aid information.
This document applies to:
— plaster of Paris (gypsum) moulding sets;
— oven-hardening plasticised PVC modelling clay sets;
— polystyrene granules sets;
— embedding sets;
— adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents) supplied or recommended in model sets.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 67 |
Technical Committee |
97.200.50
Toys
|
| ISO/FDIS 8124-12 |
Safety of toys — Part 12: Microbiological safety |
|
Under development |
|
Edition : 1 |
Number of pages : 7 |
Technical Committee |
07.100.99
Other standards related to microbiology
;
97.200.50
Toys
|
| ISO 226:2003 |
Acoustics — Normal equal-loudness-level contours |
This International Standard specifies combinations of sound pressure levels and frequencies of pure continuous tones which are perceived as equally loud by human listeners. The specifications are based on the following conditions: the sound field in the absence of the listener consists of a free progressive plane wave; the source of sound is directly in front of the listener; the sound signals are pure tones; the sound pressure level is measured at the position where the centre of the listener's head would be, but in the absence of the listener; listening is binaural; the listeners are otologically normal persons in the age range from 18 years to 25 years inclusive.
|
Withdrawn |
2003-08 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 226:2023 |
Acoustics — Normal equal-loudness-level contours |
This document specifies combinations of sound pressure levels and frequencies of pure continuous tones which are perceived as equally loud by human listeners. The specifications are based on the following conditions:
a) the sound field in the absence of the listener consists of a free progressive plane wave;
b) the source of sound is directly in front of the listener;
c) the sound signals are pure tones;
d) the sound pressure level is measured at the position where the centre of the listener's head would be, but in the absence of the listener;
e) listening is binaural;
f) the listeners are otologically normal persons in the age range from 18 years to 25 years inclusive.
The data are given in graphical form in Annex A and in numerical form in Annex B for the preferred frequencies in the one-third-octave series from 20 Hz to 12 500 Hz, inclusive, in accordance with ISO 266.
|
Published |
2023-03 |
Edition : 3 |
Number of pages : 20 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-1:1998 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones |
|
Withdrawn |
1998-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-1:2017 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones |
ISO 389-1:2017 specifies a standard reference zero for the scale of hearing threshold level applicable to pure-tone air conduction audiometers, to promote agreement and uniformity in the expression of hearing threshold level measurements throughout the world.
ISO 389-1:2017 states the information in a form suitable for direct application to the calibration of audiometers, that is, in terms of the reference equivalent threshold sound pressure levels of generic supra-aural earphones specified in 4.2, measured on an ear simulator complying with IEC 60318‑1 and in terms of model-specific data given in two additional tables for the IEC 60318‑3 acoustic coupler and the IEC 60318‑1 ear simulator, respectively.
The data are based on an assessment of the information available from the various standardizing laboratories responsible for audiometric standards and from scientific publications.
Some notes on the application and derivation of the reference levels are given in Annexes A and B.
|
Published |
2017-12 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-2:1994 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones |
Specifies levels supplementary to those specified in ISO 389:1991 (to be re-issued as ISO 389-1). Values given are applicable to insert earphones of type Etymotic Research ER-3A, coupled to the human ear by ear inserts of type ER-3-14.
|
Published |
1994-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-3:1994 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators |
Specifies the following data applicable to the calibration of bone vibrators for pure-tone bone-conduction audiometry: reference equivalent threshold force levels (RETFL), corresponding to the threshold of hearing of young otologically normal persons by bone-conduction audiometry; essential characteristics of the bone vibrator and of its method of coupling to a person under test and to the mechanical coupler; essential characteristics and datum level of the masking noise applied to the ear not under test.
|
Withdrawn |
1994-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-3:1994/Cor 1:1995 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators — Technical Corrigendum 1 |
Corrigendum relates to the first section of table A.1 and reference 4 in annex E.
|
Withdrawn |
1995-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 8253-1:2010 |
Acoustics — Audiometric test methods — Part 1: Pure-tone air and bone conduction audiometry |
ISO 8253-1:2010 specifies procedures and requirements for pure-tone air conduction and bone conduction threshold audiometry. For screening purposes, only pure-tone air conduction audiometric test methods are specified. It is possible that the procedures are not appropriate for special populations, e.g. very young children.
ISO 8253-1:2010 does not cover audiometric procedures to be carried out at levels above the hearing threshold levels of the subjects.
Procedures and requirements for speech audiometry, electrophysiological audiometry, and where loudspeakers are used as a sound source are not specified.
|
Published |
2010-11 |
Edition : 2 |
Number of pages : 29 |
Technical Committee |
13.140
Noise with respect to human beings
|