| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 5445:1980 |
Ferrosilicon — Specification and conditions of delivery |
Refers to ferrosilicon usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage. An annex recommends minimum dimensions of openings for feeding systems.
|
Published |
1980-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5446:1980 |
Ferromanganese — Specification and conditions of delivery |
Refers to ferromanganese usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Withdrawn |
1980-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5447:1980 |
Ferrosilicomanganese — Specification and conditions of delivery |
Refers to ferrosilicomanganese usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Published |
1980-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5448:1981 |
Ferrochromium — Specification and conditions of delivery |
Refers to ferrochromium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Published |
1981-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5449:1980 |
Ferrosilicochromium — Specification and conditions of delivery |
Refers to ferrosilicochromium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Published |
1980-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5450:1980 |
Ferrotungsten — Specification and conditions of delivery |
Refers to ferrotungsten usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Published |
1980-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5451:1980 |
Ferrovanadium — Specification and conditions of delivery |
Refers to ferrovanadium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Withdrawn |
1980-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5451:2022 |
Ferrovanadium — Specification and conditions of delivery |
This document defines the specification and conditions of delivery for ferrovanadium usually supplied for steelmaking and foundry use.
|
Published |
2022-12 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5452:1980 |
Ferromolybdenum — Specification and conditions of delivery |
Refers to ferromolybdenum usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Published |
1980-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5453:1980 |
Ferroniobium — Specification and conditions of delivery |
Refers to ferroniobium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Published |
1980-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 5454:1980 |
Ferrotitanium — Specification and conditions of delivery |
Refers to ferrotitanium usually supplied for steelmaking and foundry use. Specifies definition, information for ordering, requirements, testing, despatch and storage.
|
Published |
1980-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 6352:1985 |
Ferronickel — Determination of nickel content — Dimethylglyoxime gravimetric method |
Applies to nickel contents in the range 15 to 60 % (m/m). Specifies principle, reagents, apparatus and samples, procedure, expression of results and test report. Annex A is provided for the determination of nickel in combined filtrates by atomic absorption spectrometry. Annex B gives a statistical report of interlaboratory tests.
|
Published |
1985-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 6467:1980 |
Ferrovanadium — Determination of vanadium content — Potentiometric method |
The method applies to alloys having a vanadium content less than or equal to 85 % (m/m). Specifies principle, reagents, apparatus, sample, procedure, expression of results, repeatability and test report.
|
Withdrawn |
1980-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 6467:2018 |
Ferrovanadium — Determination of vanadium content — Potentiometric method |
ISO 6467:2018 specifies a potentiometric method for the determination of the vanadium content of ferrovanadium.
The method is applicable to vanadium contents between 35,0 % and 85,0 % (mass fraction) in ferrovanadium.
|
Published |
2018-01 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 6501:1988 |
Ferronickel — Specification and delivery requirements |
Specifies the technical delivery requirements for various forms of ferronickel (ingots, pieces, shot) usually delivered to foundries and steel-melting shops. Specifies furthermore definition, information for ordering, control, dispatch and storage.
|
Withdrawn |
1988-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 6501:2020 |
Ferronickel — Specification and delivery requirements |
This document specifies the technical delivery requirements for the various forms of ferronickel (ingots, pieces and shot) usually supplied for steel making and foundry use.
|
Published |
2020-06 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 7087:1984 |
Ferroalloys — Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling |
Specifies methods for the purposes of determining the parameters of random sampling given in the relevant International Standards. Includes an annex.
|
Published |
1984-10 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 7347:1987 |
Ferroalloys — Experimental methods for checking the bias of sampling and sample preparation |
Applies to ferroalloys given in the relevant International Standards. Should be read in conjunction with ISO 3713, ISO 7087 and ISO 7373. Includes four annexes.
|
Published |
1987-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 7373:1987 |
Ferroalloys — Experimental methods for checking the precision of sample division |
The methods are carried out on the gross sample or sub-sample obtained from a ferroalloy consignment according to the methods prescribed in the relevant International Standard. The methods are applicable to the taking of increments of crushable ferroalloys but are not applicable to uncrushable ferroalloys of which increments are taken by boring.
|
Published |
1987-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 7520:1985 |
Ferronickel — Determination of cobalt content — Flame atomic absorption spectrometric method |
Applies to cobalt contents in the range 0,025 to 2,5 % (m/m). Specifies principle, reagents, apparatus, sampling and samples, procedure, expression on results, special cases and test report.
|
Published |
1985-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 7524:1985 |
Nickel, ferronickel and nickel alloys — Determination of carbon content — Infra-red absorption method after induction furnace combustion |
Applies to carbon content of nickel and ferronickel in the range 0.001 to 2.0 % (m/m), and of nickel alloys in the range 0.001 to 0.5 % (m/m). Specifies principle, reagents and materials, apparatus, sampling and samples, procedure, expression of results, some notes and test report. Examples of compositions of nickel, ferronickel and nickel alloys are given in Annex A.
|
Withdrawn |
1985-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
77.100
Ferroalloys
;
77.120.40
Nickel, chromium and their alloys
|
| ISO 7524:2020 |
Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion |
This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the carbon content in ferronickels in the range of 0,004 % to 2,5 %.
The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).
|
Published |
2020-03 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
77.100
Ferroalloys
;
77.120.40
Nickel, chromium and their alloys
|
| ISO 7526:1985 |
Nickel, ferronickel and nickel alloys — Determination of sulfur content — Infra-red absorption method after induction furnace combustion |
Applies to the determination of sulfur content of nickel and ferronickel in the range 0,001 to 0,3 % (m/m), and of nickel alloys in the range 0,001 to 0,1 % (m/m). Specifies principle, reagents and materials, apparatus, sampling and samples, procedure, expression of results, some notes and test report. Examples of compositions of nickel, ferronickel and nickel alloy are given in annex A.
|
Withdrawn |
1985-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
77.100
Ferroalloys
;
77.120.40
Nickel, chromium and their alloys
|
| ISO 7526:2020 |
Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion |
This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the sulfur content in ferronickels in the range of 0,002 % to 0,12 %.
The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).
|
Published |
2020-03 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
77.100
Ferroalloys
;
77.120.40
Nickel, chromium and their alloys
|
| ISO 7527:1985 |
Nickel, ferronickel and nickel alloys — Determination of sulfur content — Iodimetric titration method after induction furnace combustion |
|
Published |
1985-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
77.100
Ferroalloys
;
77.120.40
Nickel, chromium and their alloys
|
| ISO 2738:1999 |
Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity |
|
Published |
1999-11 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
77.160
Powder metallurgy
|
| ISO 7692:1983 |
Ferrotitanium — Determination of titanium content — Titrimetric method |
The method is applicable to ferrotitanium having titanium contents between 20 and 80 % (m/m). Specifies principle, reagents, apparatus, sample, procedure, expression of results and test report. Figures show the Bunsen valve and the apparatus for titration.
|
Published |
1983-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 7693:1984 |
Ferrotungsten — Determination of tungsten content — Cinchonine gravimetric method |
The method is applicable to ferrotungsten having tungsten contents between 70 and 90 % (m/m). Specifies principle, reagents, apparatus, sample, procedure, expression of results and test report. It also specifies, in the annex, a spectrometric method for the determination of molybdenum which interferes with the determination.
|
Published |
1984-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
77.100
Ferroalloys
|
| ISO/TR 7955:1982 |
Ferroniobium — Determination of niobium content — Gravimetric method |
Specifies a photometric method for the determination of the titanium content (annex A), a gravimetric method for the determination of tantalum contents greater than 1 % (m/m) (annex B) and a photometric method for the determination of tantalum contents less than 1 % (m/m) (annex C). The methods are applicable to ferroniobium having niobium contents between 40 and 75 % (m/m), tantalum contents between 0,25 and 8,0 % (m/m) and titanium contents between 0,05 and 5,0 % (m/m). Interference may arise if bismuth or trivalent antimony are present.
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 8049:1988 |
Ferronickel shot — Sampling for analysis |
Applies to ferronickel lots in the form of shot as specified in ISO 6501 in those cases where lots are constituted either heat by heat or by taking from blendes stock. The purpose is to determine the contents of the various elements either from slugs by physical analysis methods or from chips by dry methods or chemical analysis.
|
Withdrawn |
1988-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 8049:2016 |
Ferronickel shot — Sampling for analysis |
ISO 8049:2016 defines a method of sampling for analysis of ferronickel lots in the form of shot as specified in ISO 6501 in those cases where lots are constituted either heat by heat or by taking from blended stock.
The purpose is to determine the contents of the various elements
- either from slugs by physical analysis methods (such as X-ray fluorescence or emission spectral analysis), or
- from chips by dry methods (carbon, sulfur) or chemical analysis (other elements).
|
Published |
2016-06 |
Edition : 2 |
Number of pages : 29 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 8050:1988 |
Ferronickel ingots or pieces — Sampling for analysis |
Applies to ferronickel lots in ingot or piece form with a view to obtaining a representative laboratory sample for the determination of the chemical composition of the lot. A choice is to be made between a first procedure that can be applied at the producer's plant during casting or a second procedure that can be applied to lots as delivered at the buyer's premises. Includes two alternatives for sample taking (drilling and milling). Each party is entitled to participate in sampling operations.
|
Published |
1988-12 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 8343:1985 |
Ferronickel — Determination of silicon content — Gravimetric method |
Specifies a method for the determination of silicon in ferronickel in the range 0,2 to 4,0 % (m/m). Gives principle, reagents, apparatus, sampling and samples, procedure, expression of results and test report.
|
Published |
1985-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 8954-1:1990 |
Ferroalloys — Vocabulary — Part 1: Materials |
|
Published |
1990-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
77.100
Ferroalloys
;
01.040.77
Metallurgy (Vocabularies)
|
| ISO 8954-2:1990 |
Ferroalloys — Vocabulary — Part 2: Sampling and sample preparation |
|
Published |
1990-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
77.100
Ferroalloys
;
01.040.77
Metallurgy (Vocabularies)
|
| ISO 8954-3:1990 |
Ferroalloys — Vocabulary — Part 3: Sieve analysis |
|
Published |
1990-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
77.100
Ferroalloys
;
01.040.77
Metallurgy (Vocabularies)
|
| ISO 10386:1994 |
Ferroboron — Specification and conditions of delivery |
Specifies requirements and conditions of delivery for ferroboron usually supplied for steelmaking and foundry use.
|
Published |
1994-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 10387:1994 |
Metal chrome — Specification and conditions of delivery |
Specifies requirements and conditions of delivery for metal chrome usually supplied for alloying special steels and alloys.
|
Published |
1994-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 11400:1992 |
Nickel, ferronickel and nickel alloys — Determination of phosphorus content — Phosphovanadomolybdate molecular absorption spectrometric method |
Phosphorus content can be determined in the range of 0,000 5 % (m/m) to 0,05 % (m/m). As, Cr, Hf, Nb, Si, Ta, Ti, W interfere, but the interferences can be avoided. The principle is dissolution of a test portion in a mixture of nitric and hydrochloric acids, fuming with perchloric acid, removal of chromium, complexation of silicon, conversion of phosphorus to phosphovanadomolybdic acid, extraction of this compound.
|
Withdrawn |
1992-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
77.100
Ferroalloys
;
77.120.40
Nickel, chromium and their alloys
|
| ISO 11400:2021 |
Nickel, ferronickels and nickel alloys — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
This document specifies a spectrophotometric method for the determination of the phosphorus content in nickel, ferronickels and nickel alloys between 0,000 5 % (by mass) and 0,05 % (by mass).
Arsenic, chromium, hafnium, niobium, silicon, tantalum, titanium and tungsten interfere, but the interferences can be avoided by complexation or volatilization (for chromium). The lowest phosphorus content [0,000 5 % (by mass)] can only be reached in samples with low contents of these interfering elements.
|
Published |
2021-12 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
77.100
Ferroalloys
;
77.120.40
Nickel, chromium and their alloys
|
| ISO 11438-1:1993 |
Ferronickel — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 1: General requirements and sample dissolution |
Specifies the general requirements for analysis by electrothermal atomic absorption spectrometry, preparation and dissolution of the test sample, general procedure, method of calculation and the procedures used for the evaluation of the repeatability and reproducibility of the individual methods specified in the other parts of ISO 11438.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 11438-2:1993 |
Ferronickel — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 2: Determination of lead content |
The principle of the method specified is dissolution of a test portion in nitric acid, measurement of the absorption of the resonance line energy from the spectrum of lead in the test solution at a wavelength of 283,3 nm by an atomic absorption spectrometer fitted with a graphite furnace electrothermal atomizer, calibration by the standard additions method described in ISO 11438-1. Applies to lead contents in the range of 1,0 g/t to 5,0 g/t in ferronickel.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 11438-3:1993 |
Ferronickel — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 3: Determination of antimony content |
The principle of the method specified is dissolution of a test portion in nitric acid, measurement of the absorption of the resonance line energy from the spectrum of antimony in the test solution at a wavelength of 217,6 nm by an atomic absorption spectrometer fitted with a graphite furnace electrothermal atomizer, calibration by the standard additions method described in ISO 11438-1. Applies to antimony contents in the range of 1,0 g/t to 5,0 g/t in ferronickel.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 11438-4:1993 |
Ferronickel — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 4: Determination of tin content |
The principle of the method specified is dissolution of a test portion in nitric acid, measurement of the absorption of the resonance line energy from the spectrum of tin in the test solution at a wavelength of 286,3 nm by an atomic absorption spectrometer fitted with a graphite furnace electrothermal atomizer, calibration by the standard additions method described in ISO 11438-1. Applies to tin contents in the range of 1,0 g/t to 10,0 g/t in ferronickel.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 11438-5:1993 |
Ferronickel — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 5: Determination of tellurium content |
The principle of the method specified is dissolution of a test portion in nitric acid, measurement of the absorption of the resonance line energy from the spectrum of tellurium in the test solution at a wavelength of 214,3 nm by an atomic absorption spectrometer fitted with a graphite furnace electrothermal atomizer, calibration by the standard additions method described in ISO 11438-1. Applies to tellurium contents in the range of 0,3 g/t to 2,0 g/t in ferronickel.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 11438-6:1993 |
Ferronickel — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 6: Determination of thallium content |
The principle of the method specified is dissolution of a test portion in nitric acid, measurement of the absorption of the resonance line energy from the spectrum of thallium in the test solution at a wavelength of 276,8 nm by an atomic absorption spectrometer fitted with a graphite furnace electrothermal atomizer, calibration by the standard additions method described in ISO 11438-1. Applies to thallium contents in the range of 0,3 g/t to 1,0 g/t in ferronickel.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 11438-7:1993 |
Ferronickel — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 7: Determination of silver content |
The principle of the method specified is dissolution of a test portion in nitric acid, measurement of the absorption of the resonance line energy from the spectrum of silver in the test solution at a wavelength of 328,1 nm by an atomic absorption spectrometer fitted with a graphite furnace electrothermal atomizer, calibration by the standard additions method described in ISO 11438-1. Applies to silver contents in the range of 1,0 g/t to 6,0 g/t in ferronickel.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 11438-8:1993 |
Ferronickel — Determination of trace-element content by electrothermal atomic absorption spectrometric method — Part 8: Determination of indium content |
The principle of the method specified is dissolution of a test portion in nitric acid, measurement of the absorption of the resonance line energy from the spectrum of indium in the test solution at a wavelength of 325,6 nm by an atomic absorption spectrometer fitted with a graphite furnace electrothermal atomizer, calibration by the standard additions method described in ISO 11438-1. Applies to indium contents in the range of 0,5 g/t to 2,5 g/t in ferronickel.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
77.100
Ferroalloys
|
| ISO 23156:2021 |
Ferronickels — Determination of phosphorus, manganese, chromium, copper and cobalt contents — Inductively coupled plasma optical emission spectrometric method |
This document specifies a method for the determination of phosphorus, manganese, chromium, copper and cobalt contents in ferronickels, by inductively coupled plasma (ICP) optical emission spectrometry, within the ranges specified in Table 1.
This method is applicable to all grades of ferronickels specified in ISO 6501.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
77.100
Ferroalloys
;
77.120.40
Nickel, chromium and their alloys
|
| ISO 1559:1978 |
Alloy for dental amalgam |
|
Withdrawn |
1978-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1559:1986 |
Dentistry — Alloys for dental amalgam |
|
Withdrawn |
1986-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1559:1995 |
Dental materials — Alloys for dental amalgam |
Specifies requirements and test methods for alloys composed mainly of silver, tin and copper. The alloy may be in either powder or tablet form, or in capsules with portions of alloy and mercury predosed by the manufacturer, suitable for the preparation of dental amalgam. Replaces the second edition, of which it constitutes a technical revision.
|
Withdrawn |
1995-12 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1559:1995/Cor 1:1997 |
Dental materials — Alloys for dental amalgam — Technical Corrigendum 1 |
|
Withdrawn |
1997-05 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1560:1975 |
Dental mercury |
|
Withdrawn |
1975-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1560:1985 |
Dental mercury |
Specification of requirements and test methods for mercury suitable for the preparation of dental amalgam, together with requirements for packaging and marketing. This standard does not specify neither the requirements for sampling and the method of procurement nor the amount of mercury needed for testing.
|
Withdrawn |
1985-04 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1561:1975 |
Dental inlay casting wax |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1561:1995 |
Dental casting wax |
Specifies the classification of and requirements for dental casting wax and describes test methods for the determination of compliance with these requirements. Replaces the first edition, which has been technically revised.
|
Withdrawn |
1995-10 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1562:1976 |
Dental casting gold alloys |
|
Withdrawn |
1976-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1562:1984 |
Dental casting gold alloys |
|
Withdrawn |
1984-08 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1942-2:1989/Amd 2:1992 |
Dental vocabulary — Part 2: Dental materials — Amendment 2 |
Adds the terms 2.146 (contact indicating material), 2.147 (fluoride gel), 2.148 (pit and fissure sealant), and 2.149 (opaquer).
|
Withdrawn |
1992-07 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.060.10
Dental materials
|
| ISO 1562:1993 |
Dental casting gold alloys |
Gives the classification of, and specifies requirements and test methods for gold-based dental casting alloys with a content of at least 75 % (m/m) of gold and platinum group metals. Applies to casting alloys suitable for the fabrication of dental restorations and appliances. Does not apply to alloys intended for use as the substructure of a metallo-ceramic restoration (ISO 9693) nor to dental casting alloys with noble metal content of 25 % up to but not including 75 % (ISO 8891).
|
Withdrawn |
1993-11 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1562:2004 |
Dentistry — Casting gold alloys |
ISO 1562:2004 gives the classification of, and specifies requirements for dental casting gold alloys with at least 60 % mass fraction of gold and at least 75 % mass fraction of gold plus specified platinum group metals (platinum, palladium, iridium, ruthenium and rhodium). Test methods are given for providing information on corrosion resistance, tarnishing resistance and electrochemical behaviour.
ISO 1562:2004 is applicable to casting alloys suitable for the fabrication of dental restorations and appliances without ceramic veneer.
|
Withdrawn |
2004-05 |
Edition : 4 |
Number of pages : 16 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1563:1978 |
Alginate dental impression material |
|
Withdrawn |
1978-06 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1563:1978/Amd 1:1981 |
Alginate dental impression material — Amendment 1 |
|
Withdrawn |
1981-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1563:1990 |
Dental alginate impression material |
Establishment of the classification of and specification of the requirements for impression materials in powder form containing an alginate as the gel-forming ingredient. This standard replaces ISO/R 1563/1970 of which it constitutes a technical revision. The figures show the different test apparatus, instruments and components.
|
Withdrawn |
1990-08 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1564:1976 |
Agar impression material |
|
Withdrawn |
1976-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1564:1995 |
Dental aqueous impression materials based on agar |
Specifies requirements for physical properties and other characteristics of impression materials and tests for determining compliance with those requirements. It also specifies requirements with respect to the manufacturer's instructions, and the essentials for packaging, labelling and marking. Replaces the first edition to which a great number of amendments were made.
|
Withdrawn |
1995-10 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1565:1978 |
Dental silicate cement (hand mixed) |
|
Withdrawn |
1978-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1566:1978 |
Dental zinc phosphate cement |
|
Withdrawn |
1978-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1567:1978 |
Denture base resin |
|
Withdrawn |
1978-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1567:1988 |
Dentistry — Denture base polymers |
|
Withdrawn |
1988-10 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1567:1999 |
Dentistry — Denture base polymers |
|
Withdrawn |
1999-02 |
Edition : 3 |
Number of pages : 27 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1567:1999/Amd 1:2003 |
Dentistry — Denture base polymers — Amendment 1 |
|
Withdrawn |
2003-09 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 1942-2:1989 |
Dental vocabulary — Part 2: Dental materials |
Intended to provide accepted definitions for a number of terms used in dentistry that could prove useful for the comprehension of documents and to improve communication. It defines 121 terms of dental materials. Together with the other four parts it constitutes a technical revision of the first edition of this standard.
|
Withdrawn |
1989-06 |
Edition : 3 |
Number of pages : 16 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.060.10
Dental materials
|
| ISO 1942-2:1989/Amd 1:1992 |
Dental vocabulary — Part 2: Dental materials — Amendment 1 |
Gives in numerical sequence the terms from 2.122 up to and including 2.145 in English and French.
|
Withdrawn |
1992-03 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.040.11
Health care technology (Vocabularies)
;
11.060.10
Dental materials
|
| ISO 3107:1988 |
Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements |
Cancels and replaces ISO 3106/74 and ISO 3107/74. It specifies requirements and test methods for cements delivered as separate components and used in restorative dentistry for temporary and permanent cementation. Specific qualitative or quantitative requirements for freedom from biological or toxicological hazards are not included.
|
Withdrawn |
1988-10 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3107:2004 |
Dentistry — Zinc oxide/eugenol and zinc oxide/non-eugenol cements |
ISO 3107:2004 specifies the requirements and performance test methods for non-water-based zinc oxide/eugenol cements suitable for use in restorative dentistry for temporary cementation, for permanent cementation, for cavity liners and bases and as temporary restorations.
ISO 3107:2004 is also applicable to non-eugenol cements containing zinc oxide and aromatic oils suitable for temporary cementation.
|
Withdrawn |
2004-10 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3107:2004/Cor 1:2006 |
Dentistry — Zinc oxide/eugenol and zinc oxide/non-eugenol cements — Technical Corrigendum 1 |
|
Withdrawn |
2006-03 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3107:2011 |
Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements |
ISO 3107:2011 specifies requirements for non-water-based zinc oxide/eugenol cements suitable for use in restorative dentistry for temporary cementation, for bases and as temporary restorations.
ISO 3107:2011 also specifies requirements for non-eugenol cements containing zinc oxide and aromatic oils suitable for temporary cementation.
|
Withdrawn |
2011-03 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3107:2022 |
Dentistry — Zinc oxide-eugenol cements and non-eugenol zinc oxide cements |
This document specifies requirements for zinc oxide-eugenol cements suitable for use in restorative dentistry for temporary cementation, for bases and as temporary restorations.
This document also specifies requirements for non-eugenol zinc oxide cements containing zinc oxide and oil(s) other than eugenol for temporary cementation.
|
Published |
2022-09 |
Edition : 5 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3336:1977 |
Dentistry — Synthetic resin teeth |
|
Withdrawn |
1977-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3336:1993 |
Dentistry — Synthetic polymer teeth |
Specifies a classification (anterior teeth, posterior teeth), requirements and test methods for teeth which are composed of synthetic polymers such as poly(methyl methacrylate) and its copolymers, and which are manufactured for use in prostheses used in dentistry.
|
Withdrawn |
1993-08 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3824:1977 |
Dental silicophosphate cement (hand-mixed) |
|
Withdrawn |
1977-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3824:1984 |
Dental silicophosphate cement (hand-mixed) |
|
Withdrawn |
1984-05 |
Edition : 2 |
Number of pages : 30 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 3851:1977 |
Capsulated dental silicate and silico-phosphate filling materials |
|
Withdrawn |
1977-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/FDIS 3990 |
Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials |
|
Under development |
|
Edition : 1 |
Number of pages : 21 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4049:1978 |
Resin-based dental filling materials |
|
Withdrawn |
1978-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4049:1988 |
Dentistry — Resin-based filling materials |
|
Withdrawn |
1988-12 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4049:1988/Cor 1:1992 |
Dentistry — Resin-based filling materials — Technical Corrigendum 1 |
|
Withdrawn |
1992-01 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4049:2000 |
Dentistry — Polymer-based filling, restorative and luting materials |
|
Withdrawn |
2000-07 |
Edition : 3 |
Number of pages : 27 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6874:2005 |
Dentistry — Polymer-based pit and fissure sealants |
ISO 6874:2005 specifies requirements and test methods for polymer-based materials intended for sealing pits and fissures in teeth.
ISO 6874:2005 covers both self-cured and external-energy-activated materials.
|
Withdrawn |
2005-08 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4049:2009 |
Dentistry — Polymer-based restorative materials |
ISO 4049:2009 specifies requirements for dental polymer-based restorative materials supplied in a form suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation, and intended for use primarily for the direct or indirect restoration of cavities in the teeth and for luting.
The polymer-based luting materials covered by ISO 4049:2009 are intended for use in the cementation or fixation of restorations and appliances such as inlays, onlays, veneers, crowns and bridges. This International Standard does not cover those polymer-based luting materials that have an adhesive component within the structure of the material.
|
Withdrawn |
2009-10 |
Edition : 4 |
Number of pages : 28 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4049:2019 |
Dentistry — Polymer-based restorative materials |
This document specifies requirements for dental polymer-based restorative materials supplied in a form suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation, and intended for use primarily for the direct or indirect restoration of the teeth and for luting.
The polymer-based luting materials covered by this document are intended for use in the cementation or fixation of restorations and appliances such as inlays, onlays, veneers, crowns and bridges. This document does not cover those polymer-based luting materials that have an adhesive component within the structure of the material (see ISO/TS 16506).
The document does not cover polymer-based materials intended to prevent caries (see ISO 6874), core materials or those used for veneering metal sub-frames (see ISO 10477).
|
Published |
2019-05 |
Edition : 5 |
Number of pages : 29 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4104:1984 |
Dental zinc polycarboxylate cements |
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/TS 4640 |
Dentistry — Test methods for tensile bond strength to tooth structure |
|
Under development |
2023-05 |
Edition : 1 |
|
Technical Committee |
11.060.10
Dental materials
|
| ISO 4823:1984 |
Dental materials — Elastomeric impression materials |
|
Withdrawn |
1984-07 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4823:1992 |
Dental elastomeric impression materials |
|
Withdrawn |
1992-03 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4823:2000 |
Dentistry — Elastomeric impression materials |
|
Withdrawn |
2000-12 |
Edition : 3 |
Number of pages : 33 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4823:2000/Amd 1:2007 |
Dentistry — Elastomeric impression materials — Amendment 1 |
|
Withdrawn |
2007-07 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4823:2000/Cor 1:2004 |
Dentistry — Elastomeric impression materials — Technical Corrigendum 1 |
|
Withdrawn |
2004-07 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
11.060.10
Dental materials
|