| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4823:2015 |
Dentistry — Elastomeric impression materials |
ISO 4823:2015 specifies the requirements and tests that the state-of-the art body of knowledge suggests for helping determine whether the elastomeric impression materials, as prepared for retail marketing, are of the quality needed for their intended purposes.
NOTE This International Standard does not address possible biological hazards associated with the materials. Therefore, interested parties are encouraged to explore ISO 7405 and ISO 10993 for assessment of such hazards.
|
Withdrawn |
2015-08 |
Edition : 4 |
Number of pages : 39 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4823:2021 |
Dentistry — Elastomeric impression and bite registration materials |
This document specifies the requirements and their test methods for elastomeric impression and bite registration materials.
NOTE This document does not address possible biological hazards associated with the materials. Assessment of these hazards is addressed in ISO 7405 and the ISO 10993 series.
|
Published |
2021-02 |
Edition : 5 |
Number of pages : 33 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4824:1981 |
Dentistry — Porcelain denture teeth |
|
Withdrawn |
1981-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4824:1993 |
Dentistry — Ceramic denture teeth |
Specifies the requirements and test methods (dimensions, colour and blending of shades, biocompatibility, surface finish, anchorage, resistance to thermal shock, porosity) for ceramic teeth suitable for use in the manufacture of removable prostheses.
|
Withdrawn |
1993-01 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 4824:1993/Amd 1:1997 |
Dentistry — Ceramic denture teeth — Amendment 1 |
|
Withdrawn |
1997-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6871-1:1994 |
Dental base metal casting alloys — Part 1: Cobalt-based alloys |
Specifies requirements and test methods for cobalt-based dental casting alloys suitable for use in fabrication of removable dental appliances. Does not apply to alloys intended for use in fabrication of metal-ceramic dental restorations.
|
Withdrawn |
1994-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6871-1:1994/Amd 1:2005 |
Dental base metal casting alloys — Part 1: Cobalt-based alloys — Amendment 1 |
|
Withdrawn |
2005-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6871-1:1994/Cor 1:1998 |
Dental base metal casting alloys — Part 1: Cobalt-based alloys — Technical Corrigendum 1 |
|
Withdrawn |
1998-08 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6871-2:1994 |
Dental base metal casting alloys — Part 2: Nickel-based alloys |
Specifies requirements and test methods for nickel-based dental casting alloys suitable for use in fabrication of removable dental appliances. Does not apply to alloys intended for use in fabrication of metal-ceramic dental restorations.
|
Withdrawn |
1994-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6871-2:1994/Amd 1:2005 |
Dental base metal casting alloys — Part 2: Nickel-based alloys — Amendment 1 |
|
Withdrawn |
2005-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6871:1987 |
Dental base metal casting alloys |
|
Withdrawn |
1987-01 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6872:1984 |
Dental ceramic |
|
Withdrawn |
1984-06 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6872:1995 |
Dental ceramic |
Specifies the requirements and test methods for dental ceramics for all fixed ceramic inlays. Cancels and replaces the first edition, which has been technically revised.
|
Withdrawn |
1995-08 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6872:1995/Amd 1:1997 |
Dental ceramic — Amendment 1 |
|
Withdrawn |
1997-11 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6872:2008 |
Dentistry — Ceramic materials |
ISO 6872:2008 specifies the requirements and the corresponding test methods for dental ceramic materials for fixed all-ceramic and metal-ceramic restorations and prostheses.
|
Withdrawn |
2008-09 |
Edition : 3 |
Number of pages : 24 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6872:2015 |
Dentistry — Ceramic materials |
ISO 6872:2015 specifies the requirements and the corresponding test methods for dental ceramic materials for fixed all-ceramic and metal-ceramic restorations and prostheses.
|
Published |
2015-06 |
Edition : 4 |
Number of pages : 28 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6872:2015/Amd 1:2018 |
Dentistry — Ceramic materials — Amendment 1 |
|
Published |
2018-04 |
Edition : 4 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/DIS 6872 |
Dentistry — Ceramic materials |
|
Under development |
|
Edition : 5 |
Number of pages : 32 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6873:1983 |
Dental gypsum products |
|
Withdrawn |
1983-11 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6873:1998 |
Dental gypsum products |
|
Withdrawn |
1998-03 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6873:2013 |
Dentistry — Gypsum products |
ISO 6873:2013 gives a classification of, and specifies requirements for, gypsum products used for dental purposes such as making oral impressions, moulds, casts, dies or model bases, and mounting models. It specifies the test methods to be employed to determine compliance with these requirements. It also includes requirements for the labelling of packaging and for adequate instructions to accompany each package.
|
Published |
2013-04 |
Edition : 3 |
Number of pages : 19 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6874:1988 |
Dental resin-based pit and fissure sealants |
The specified sealant materials harden by free radical polymerization and protect teeth from the formation of caries. This standard covers both chemically cured and externally-energy-cured materials. Specific quantitative and qualitative requirements for freedom from biological hazard are not included.
|
Withdrawn |
1988-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6874:2015 |
Dentistry — Polymer-based pit and fissure sealants |
ISO 6874:2015 specifies requirements and test methods for polymer-based materials intended for sealing pits and fissures in teeth.
It covers both self-curing and external-energy-activated materials.
|
Published |
2015-09 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6876:1986 |
Dental root canal sealing materials |
Specification of requirements for materials used for permanent abturation of the root canal with or without the aid of obturating points. This standard only covers materials intended for orthograde (root filling inserted from coronal aspect) use. Reference is made to ISO/TR 7405 for requirements that relate to the freedom from toxicity.
|
Withdrawn |
1986-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6876:2001 |
Dental root canal sealing materials |
|
Withdrawn |
2001-08 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6876:2012 |
Dentistry — Root canal sealing materials |
ISO 6876:2012 specifies requirements and test methods for root canal (endodontic) sealing materials which set with or without the assistance of moisture and are used for permanent obturation of the root canal with or without the aid of obturating points/cones. It only covers sealers intended for orthograde use, i.e. a root filling placed from the coronal aspect of a tooth.
|
Published |
2012-06 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6877:1995 |
Dental root-canal obturating points |
Specifies the dimensions and compositional requirements for prefabricated metallic or polymeric-based points or cones suitable for use in the obturation of the dental root-canal, but not for support of a coronal restoration. Also specifies numerical systems and a colour coding system for designating the sizes. Covers the physical attributes expected of such products as supplied.
|
Withdrawn |
1995-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6877:2006 |
Dentistry — Root-canal obturating points |
ISO 6877:2006 specifies the dimensions and compositional requirements for prefabricated metal or polymeric points or cones suitable for use in the obturation of the dental root-canal, but not for support of a coronal restoration. It also specifies numerical systems and a colour coding system for designating the sizes.
Dental root-canal obturating points are marketed sterilized or unsterilized. ISO 6877:2006 covers the physical attributes expected of such products as supplied. Requirements for sterility are not included, and any claim that the product is sterile is the responsibility of the manufacturer.
|
Withdrawn |
2006-04 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 6877:2021 |
Dentistry — Endodontic obturating materials |
This document establishes the specifications for the dimensions of various endodontic obturating materials including preformed metal, preformed polymeric-coated metal, polymeric points, thermoplastic obturating material or combinations of the above, suitable for use in the obturation of the root canal system. This document also specifies numerical systems and a colour-coding system for designating the sizes of preformed endodontic obturating points.
Dental endodontic obturating points are marketed sterilized or non-sterilized. This document covers the physical attributes expected of such products as supplied.
Sterility is not included in this document, and any claim that the product is sterile is the responsibility of the manufacturer (see Table 3). Clause 7 specifies the labelling needed, including the instructions for use.
This document does not apply to instruments or apparatus used in conjunction with thermoplastic obturating materials (obturating material that deform with heat). This document is not applicable to materials for support of a coronal restoration.
|
Published |
2021-09 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/CD 6877 |
Dentistry — Endodontic obturating materials |
This document establishes the specifications for the dimensions of various endodontic obturating materials including preformed metal, preformed polymeric-coated metal, polymeric points, thermoplastic obturating material or combinations of the above, suitable for use in the obturation of the root canal system. This document also specifies numerical systems and a colour-coding system for designating the sizes of preformed endodontic obturating points.
Dental endodontic obturating points are marketed sterilized or non-sterilized. This document covers the physical attributes expected of such products as supplied.
Sterility is not included in this document, and any claim that the product is sterile is the responsibility of the manufacturer (see Table 3). Clause 7 specifies the labelling needed, including the instructions for use.
This document does not apply to instruments or apparatus used in conjunction with thermoplastic obturating materials (obturating material that deform with heat). This document is not applicable to materials for support of a coronal restoration.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
11.060.10
Dental materials
|
| ISO 7405:1997 |
Dentistry — Preclinical evaluation of biocompatibility of medical devices used in dentistry — Test methods for dental materials |
|
Withdrawn |
1997-08 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
11.060.10
Dental materials
;
11.100.99
Other standards related to laboratory medicine
|
| ISO 505:1999 |
Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts |
|
Withdrawn |
1999-12 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7405:2008 |
Dentistry — Evaluation of biocompatibility of medical devices used in dentistry |
ISO 7405:2008 specifies test methods for the evaluation of biological effects of medical devices used in dentistry. It includes testing of pharmacological agents that are an integral part of the device under test.
ISO 7405:2008 does not cover testing of materials and devices that do not come into direct or indirect contact with the patient's body.
|
Withdrawn |
2008-12 |
Edition : 2 |
Number of pages : 34 |
Technical Committee |
11.060.10
Dental materials
;
11.100.99
Other standards related to laboratory medicine
|
| ISO 7405:2008/Amd 1:2013 |
Dentistry — Evaluation of biocompatibility of medical devices used in dentistry — Amendment 1: Positive control material |
|
Withdrawn |
2013-07 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
;
11.100.99
Other standards related to laboratory medicine
|
| ISO 7405:2018 |
Dentistry — Evaluation of biocompatibility of medical devices used in dentistry |
This document specifies test methods for the evaluation of biological effects of medical devices used in dentistry. It includes testing of pharmacological agents that are an integral part of the device under test.
This document does not cover testing of materials and devices that do not come into direct or indirect contact with the patient's body.
|
Published |
2018-10 |
Edition : 3 |
Number of pages : 43 |
Technical Committee |
11.060.10
Dental materials
;
11.100.99
Other standards related to laboratory medicine
|
| ISO/CD 7405 |
Dentistry — Evaluation of biocompatibility of medical devices used in dentistry |
This document specifies test methods for the evaluation of biological effects of medical devices used in dentistry. It includes testing of pharmacological agents that are an integral part of the device under test.
This document does not cover testing of materials and devices that do not come into direct or indirect contact with the patient's body.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
11.060.10
Dental materials
;
11.100.99
Other standards related to laboratory medicine
|
| ISO 7489:1986 |
Dental glass polyalkenoate cements |
|
Withdrawn |
1986-05 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 7490:1990 |
Dental gypsum-bonded casting investments for gold alloys |
|
Withdrawn |
1990-06 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 7490:2000 |
Dental gypsum-bonded casting investments |
|
Withdrawn |
2000-12 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 7491:1985 |
Dental materials — Determination of colour stability of dental polymeric materials |
|
Withdrawn |
1985-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 7491:2000 |
Dental materials — Determination of colour stability |
|
Published |
2000-09 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 7551:1996 |
Dental absorbent points |
Specifies requirements and test methods for dental absorbent points used in endodontic procedures.
|
Published |
1996-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 7551 |
Dentistry — Endodontic absorbent points |
|
Under development |
2023-05 |
Edition : 2 |
|
Technical Committee |
11.060.10
Dental materials
|
| ISO 8891:1990 |
Dental casting alloys with noble metal content of 25 % up to but not including 75 % |
|
Withdrawn |
1990-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 8891:1993 |
Dental casting alloys with noble metal content of 25 % up to but not including 75 % |
|
Withdrawn |
1993-12 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 8891:1998 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % |
|
Withdrawn |
1998-12 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9333:1990 |
Dentistry -Brazing materials |
Specification of requirements and test methods for brazing materials suitable for use in brazing cast dental restorations. Important terms are defined. Specific qualitative and quantitative requirements for freedom from biological hazard are not included.
|
Withdrawn |
1990-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 7590:1988 |
Steel cord conveyor belts — Cover thickness measurement |
|
Withdrawn |
1988-08 |
Edition : 2 |
|
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 9333:2022 |
Dentistry — Brazing materials |
This document specifies the requirements and test methods for dental brazing materials suitable for use in metallic restorations.
Brazing materials with silver as the main component are excluded from this document.
|
Published |
2022-08 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9693-1:2012 |
Dentistry — Compatibility testing — Part 1: Metal-ceramic systems |
ISO 9693-1:2012 specifies test methods for determining the compatibility of metallic and ceramic materials used for dental restorations by testing the composite structure.
The requirements given in ISO 9693-1:2012 are applicable to metallic materials and ceramics when used in combination, and are not applicable to either metallic materials or ceramics when used alone.
|
Withdrawn |
2012-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9693-2:2016 |
Dentistry — Compatibility testing — Part 2: Ceramic-ceramic systems |
ISO 9693-2:2016 specifies requirements and test methods to assess the compatibility of ceramic-ceramic materials used for dental restorations by testing composite structures.
The requirements of this part of ISO 9693 apply when different ceramic components are used in combination. Compliance cannot be claimed for either ceramic alone.
For requirements of ceramic materials, see ISO 6872.
|
Withdrawn |
2016-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9693:1991 |
Dental ceramic fused to metal restorative materials |
|
Withdrawn |
1991-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9693:1999 |
Metal-ceramic dental restorative systems |
|
Withdrawn |
1999-12 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9693:1999/Amd 1:2005 |
Metal-ceramic dental restorative systems — Amendment 1 |
|
Withdrawn |
2005-10 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9693:2019 |
Dentistry — Compatibility testing for metal-ceramic and ceramic-ceramic systems |
This document specifies requirements and test methods to assess the thermomechanical compatibility between a veneering ceramic and a metallic or ceramic substructure material used for dental restorations.
This document applies only to the materials used in combination. Conformity cannot be claimed for a single material.
For requirements for ceramic materials, see ISO 6872. For requirements for metallic materials see ISO 22674.
|
Published |
2019-10 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9694:1996 |
Dental phosphate-bonded casting investments |
Classifies dental phosphate-bonded casting investments in two types. Specifies requirements for the essential physical properties of the casting investment and the test methods to be used to determine these properties.
|
Withdrawn |
1996-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9917-1:2003 |
Dentistry — Water-based cements — Part 1: Powder/liquid acid-base cements |
ISO 9917-1:2003 specifies requirements and test methods for powder/liquid acid-base dental cements intended for permanent cementation, lining and restoration. It is applicable to both hand-mixed cements and encapsulated cements for mechanical mixing. It specifies limits for each of the properties according to whether the cement is intended for use as a luting agent, a restorative material, a base or a liner.
Specific qualitative and quantitative requirements for freedom from biological hazard are not included in this part of ISO 9917, but it is recommended that, in assessing possible biological or toxicological hazards, reference should be made to ISO 7405, Dentistry -- Preclinical evaluation of biocompatibility of medical deviced used in dentistry -- Test methods for dental materials, and ISO 10993-1, Biological evaluation of medical devices -- Part 1: Evaluation and testing.
|
Withdrawn |
2003-11 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9917-1:2007 |
Dentistry — Water-based cements — Part 1: Powder/liquid acid-base cements |
ISO 9917-1:2007 specifies requirements and test methods for powder/liquid acid-base dental cements intended for permanent cementation, lining and restoration. ISO 9917-1:2007 is applicable to both hand-mixed and capsulated cements for mechanical mixing. ISO 9917-1:2007 specifies limits for each of the properties according to whether the cement is intended for use as a luting agent, a base or liner or as a restorative material.
ISO 9917-1:2007 is not intended to address resin-modified water-based cements.
|
Published |
2007-10 |
Edition : 2 |
Number of pages : 23 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/AWI 9917-1 |
Dentistry — Water-based cements — Part 1: Part 1: Powder/liquid acid-base cements |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
11.060.10
Dental materials
|
| ISO 9917-2:1998 |
Dental water-based cements — Part 2: Light-activated cements |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 7590:1990 |
Steel cord conveyor belts — Cover thickness measurement |
|
Withdrawn |
1990-09 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 9917-2:2010 |
Dentistry — Water-based cements — Part 2: Resin-modified cements |
ISO 9917‑2:2010 specifies requirements and test methods for dental cements that are intended for luting, base or lining and restoration purposes and for which the materials are water-based and set by multiple reactions in which setting is achieved by a combination of an acid-base reaction and polymerization.
|
Withdrawn |
2010-04 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9917-2:2017 |
Dentistry — Water-based cements — Part 2: Resin-modified cements |
ISO 9917-2:2017 specifies requirements and test methods for water-based dental cements in which setting is achieved by a combination of an acid-base reaction and polymerization. The materials are intended for luting, base or lining, restoration and tooth core build up purposes.
EXAMPLE Conventional glass polyalkenoate cements are normally formed by reacting an ion-leachable aluminosilicate glass with a polyalkenoic acid in an aqueous environment. Materials that fall within the scope of this document will normally be able to effect setting by such an aqueous acid-base type reaction but in addition will be able to undergo setting by polymerization.
NOTE The attention of manufacturers and test laboratories is drawn to the closely-related International Standards ISO 4049 and ISO 9917‑1 so that they can consider which is the most appropriate for evaluating any individual product.
|
Published |
2017-09 |
Edition : 3 |
Number of pages : 21 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9917:1991 |
Dental water-based cements |
Specifies requirements for dental cements as follows: silicate cements, zinc phosphate cements, silicophosphate cements, zinc polycarbonate cements and glass polyalkenoate cements.
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 9917:1991/Cor 1:1993 |
Dental water-based cements — Technical Corrigendum 1 |
Changes, at both chemical type entries for zinc phosphate in table 1, the erosion limit from 0,1 to 1,0.
|
Withdrawn |
1993-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10139-1:1991 |
Dentistry — Resilient lining materials for removable dentures — Part 1: Short-term materials |
Specifies requirements for the physical properties, test methods, packaging, marking, and manufacturer's instructions.
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10139-1:2005 |
Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use |
ISO 10139-1:2005 specifies requirements for the physical properties, test methods, packaging, marking and manufacturer's instructions for denture lining materials suitable for short-term use.
|
Withdrawn |
2005-02 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10139-1:2005/Cor 1:2006 |
Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use — Technical Corrigendum 1 |
|
Withdrawn |
2006-03 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10139-1:2018 |
Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use |
ISO 10139-1:2018 specifies requirements for the physical properties, test methods, packaging, marking and manufacturer's instructions for soft denture lining materials suitable for short-term use, including functional impression taking using existing removable prosthesis.
|
Published |
2018-03 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10139-2:1999 |
Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10139-2:2009 |
Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use |
ISO 10139-2:2009 specifies requirements for softness, adhesion, water sorption and water solubility as well as for packaging, marking and manufacturer's instructions for soft denture lining materials suitable for long-term use. These materials may also be used for maxillofacial prostheses.
|
Withdrawn |
2009-08 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10139-2:2016 |
Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use |
ISO 10139-2:2016 specifies requirements for softness, adhesion, water sorption and water solubility, as well as for packaging, marking and manufacturer's instructions for soft denture lining materials suitable for long-term use. These materials may also be used for maxillofacial prostheses.
|
Published |
2016-06 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10271:2001 |
Dental metallic materials — Corrosion test methods |
|
Withdrawn |
2001-06 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10271:2011 |
Dentistry — Corrosion test methods for metallic materials |
ISO 10271:2011 provides test methods and procedures to determine the corrosion behaviour of metallic materials used in the oral cavity. It is intended that the test methods and procedures in ISO 10271:2011 be referred to in the individual International Standards specifying such metallic materials.
ISO 10271:2011 is not applicable to instruments and dental amalgam and appliances for orthodontics.
|
Withdrawn |
2011-08 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10271:2020 |
Dentistry — Corrosion test methods for metallic materials |
This document specifies test methods and procedures to determine the corrosion behaviour of metallic materials used in the oral cavity. It is intended that these test methods and procedures be referred to in individual International Standards specifying such metallic materials.
This document is not applicable to dental instruments.
|
Published |
2020-09 |
Edition : 3 |
Number of pages : 32 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10477:1992 |
Dentistry — Polymer-based crown and bridge materials |
Covers the materials for laboratory-fabricated permanent facings or anterior crowns which may or may not be attached to a metal substructure. Classifies the materials and specifies the requirements and associated test methods.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10477:1992/Amd 1:1998 |
Dentistry — Polymer-based crown and bridge materials — Amendment 1 |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10477:2004 |
Dentistry — Polymer-based crown and bridge materials |
ISO 10477:2004 classifies polymer-based dental crown and bridge materials and specifies their requirements. It also specifies the test methods to be used to determine compliance with these requirements.
ISO 10477:2004 is applicable to polymer-based dental crown and bridge materials for laboratory-fabricated permanent facings or anterior crowns that may or may not be attached to a metal substructure. It also applies to polymer-based dental crown and bridge materials for which the manufacturer claims adhesion to the metal substructure without macromechanical retention such as beads or wires.
ISO 10477:2004 is not applicable to polymer-based materials that are used to make crowns, veneers or repairs in the operatory, nor does it cover the application of those materials to stress-bearing areas of posterior teeth.
|
Withdrawn |
2004-10 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10477:2018 |
Dentistry — Polymer-based crown and veneering materials |
This document classifies polymer-based crown and veneering materials used in dentistry and specifies their requirements. It also specifies the test methods to be used to determine conformity to these requirements.
This document is applicable to polymer-based crown and veneering materials for laboratory-fabricated permanent veneers or crowns. It also applies to polymer-based dental crown and veneering materials for which the manufacturer claims adhesion to the substructure without macro-mechanical retention such as beads or wires.
|
Withdrawn |
2018-06 |
Edition : 3 |
Number of pages : 19 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 10477:2020 |
Dentistry — Polymer-based crown and veneering materials |
This document classifies polymer-based crown and veneering materials used in dentistry and specifies their requirements. It also specifies the test methods to be used to determine conformity to these requirements.
This document is applicable to polymer-based crown and veneering materials for laboratory-fabricated permanent veneers or crowns. It also applies to polymer-based dental crown and veneering materials for which the manufacturer claims adhesion to the substructure without macro-mechanical retention such as beads or wires.
|
Published |
2020-10 |
Edition : 4 |
Number of pages : 21 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 11244:1998 |
Dental brazing investments |
|
Withdrawn |
1998-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 11245:1999 |
Dental restorations — Phosphate-bonded refractory die materials |
|
Withdrawn |
1999-03 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 11246:1996 |
Dental ethyl silicate bonded casting investments |
Describes a method for the assessment of the efficacy of ethyl silicate bonded casting investments used for dental casting alloy restorations. Specifies requirements for the essential physical properties and methods for their determination.
|
Withdrawn |
1996-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/TR 11405:1994 |
Dental materials — Guidance on testing of adhesion to tooth structure |
Specifies test methods for evaluation of the adhesive bond between dental materials and tooth structure, i. e. enamel and dentine. Describes two bond strength measurement tests, tensile and shear, a test for measurement of marginal gaps around fillings, a microleakage test, and gives guidance on clinical usage tests for such materials.
|
Withdrawn |
1994-12 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/TS 11405:2003 |
Dental materials — Testing of adhesion to tooth structure |
ISO 11405:2003 gives guidance on substrate selection, storage and handling as well as essential characteristics of different test methods for quality testing of the adhesive bond between restorative dental materials and tooth structure, i.e. enamel and dentine. It specifies two bond strength measurements tests (tensile and shear), a test for measurement of marginal gaps around fillings and a microleakage test, as well as giving recommendations on clinical usage tests for such materials. It also presents some specific test methods for bond strength measurements.
|
Withdrawn |
2003-02 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/TS 11405:2015 |
Dentistry — Testing of adhesion to tooth structure |
ISO/TS 11405:2015 gives guidance on substrate selection, storage, and handling as well as essential characteristics of different test methods for quality testing of the adhesive bond between restorative dental materials and tooth structure, i.e. enamel and dentine. It includes a tensile bond strength measurement test, a test for measurement of marginal gaps around fillings, a microleakage test, and gives guidance on clinical usage tests for such materials. Some specific test methods for bond strength measurements are given for information in Annex A.
ISO/TS 11405:2015 does not include requirements for adhesive materials and their performance.
|
Withdrawn |
2015-02 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 12163:1999 |
Dental baseplate/modelling wax |
|
Withdrawn |
1999-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 13017:2012 |
Dentistry — Magnetic attachments |
ISO 13017:2012 specifies requirements and test methods for assessing the applicability of dental magnetic attachments that provide retention, support and stabilization of crowns and bridges, removable partial dentures, overdentures, superstructures of dental implants and orthodontic or maxillofacial prostheses including obturators.
|
Withdrawn |
2012-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 13017:2012/Amd 1:2015 |
Dentistry — Magnetic attachments — Amendment 1 |
|
Withdrawn |
2015-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 13017:2020 |
Dentistry — Magnetic attachments |
This document specifies requirements and test methods for assessing the applicability of dental magnetic attachments that provide retention, support and stabilization of removable prostheses (crowns and bridges, partial dentures and overdentures), superstructures of dental implants and orthodontic or maxillofacial prostheses including obturators.
|
Published |
2020-07 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 13116:2014 |
Dentistry — Test method for determining radio-opacity of materials |
ISO 13116:2014 specifies test methods for determination of radio-opacity of a test material by reference to a specimen of an aluminium standard. The method is designed to discriminate radio-opacity at a clinically meaningful level and is not designed to take account of factors which may affect precise, inherent values of radio-opacity such as background noise, X-ray beam power, grey scale correction and image enhancement. It is recognized that such factors can change the value of radio-opacity but not the relative ranking compared to standard thicknesses of an internal standard such as aluminium. This test may be performed with conventional or digital sensoring techniques of dental X-ray apparatus.
|
Published |
2014-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 13716:1999 |
Dentistry — Reversible-irreversible hydrocolloid impression material systems |
|
Withdrawn |
1999-05 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 13897:2003 |
Dentistry — Amalgam capsules |
ISO 13897:2003 specifies requirements and test methods for predosed capsules and for reusable capsules used for mixing dental amalgam alloys and mercury.
|
Withdrawn |
2003-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 13897:2003/Cor 1:2003 |
Dentistry — Amalgam capsules — Technical Corrigendum 1 |
|
Withdrawn |
2003-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 13897:2018 |
Dentistry — Dental amalgam reusable mixing-capsules |
ISO 13897:2018 specifies the requirements for reusable mixing-capsules intended to contain dental amalgam alloy powder and dental mercury when these are mixed to produce dental amalgam, and the test methods used to determine conformity to these requirements.
NOTE ISO 7488 specifies requirements for mixing machines. The requirements for mixing-capsule are not dealt with in ISO 7488, although the mixing-capsule is an essential part of the mixing machine.
|
Published |
2018-02 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 5755-1:1987 |
Sintered metal materials — Specifications — Part 1: Materials, for bearings, impregnated with liquid lubricant |
|
Withdrawn |
1987-09 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
77.160
Powder metallurgy
;
21.100.10
Plain bearings
|
| ISO 14233:2003 |
Dentistry — Polymer-based die materials |
ISO 14233:2003 gives compositional, performance, user-information, packaging and marking, and testing requirements for polymer-based die materials used in dentistry. It is applicable to die materials having a polymeric matrix as their principal constituent. Polymer-based die materials are used in the dental laboratory mainly to produce casts from dental impressions for the manufacture of fixed or removable restorations)
|
Published |
2003-03 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
11.060.10
Dental materials
|
| ISO 14356:2003 |
Dentistry — Duplicating material |
ISO 14356:2002 specifies requirements and tests for the duplicating materials used in dentistry which are primarily intended for forming flexible moulds needed to produce positive refractory investment copies of properly blocked-out master models.
|
Published |
2003-03 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/DIS 14356 |
Dentistry — Duplicating material |
ISO 14356:2002 specifies requirements and tests for the duplicating materials used in dentistry which are primarily intended for forming flexible moulds needed to produce positive refractory investment copies of properly blocked-out master models.
|
Under development |
|
Edition : 2 |
Number of pages : 30 |
Technical Committee |
11.060.10
Dental materials
|
| ISO/TR 14569-1:2007 |
Dental materials — Guidance on testing of wear — Part 1: Wear by toothbrushing |
ISO/TR 14569-1:2007 provides guidelines for test methods for the assessment of resistance to wear by tooth brushing for the following materials:
materials used for the preparation of artificial teeth;
veneering of crowns and bridges.
|
Published |
2007-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
11.060.10
Dental materials
|