| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO/R 1893:1970 |
Refractory products — Determination of refractoriness under load (Differential — With rising temperature) |
|
Withdrawn |
1970-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
81.080
Refractories
|
| ISO 9727-6:2007 |
Cylindrical cork stoppers — Physical tests — Part 6: Determination of liquid tightness |
ISO 9727-6;2007 specifies a test method for determining the liquid tightness of a cylindrical cork stopper.
It is applicable to all types of cylindrical cork stoppers ready for use, intended to be completely inserted in the bottle neck (straight cork stoppers).
|
Published |
2007-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 9727-7:2007 |
Cylindrical cork stoppers — Physical tests — Part 7: Determination of dust content |
ISO 9727-7:2007 specifies a test method for determining the dust content of a cylindrical cork stopper.
It is applicable to all types of cylindrical cork stoppers ready for use, intended to be completely inserted in the bottle neck (straight cork stoppers).
|
Published |
2007-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 9727-8:2022 |
Cylindrical cork stoppers — Physical tests — Part 8: Determination of capillarity |
This document specifies the test method to determine the capillarity of cylindrical cork stoppers. It consists in measuring the capillary rise by dipping in a hydro-alcoholic solution containing a dye. Two methods using the same procedure but different concentrations of hydro-alcoholic solutions are described.
It is applicable to all types of cylindrical cork stoppers, ready for use.
|
Published |
2022-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 9727:1991 |
Cylindrical stoppers of natural cork — Physical tests — Reference methods |
Specifies the reference methods for determining the following characteristics of theses stoppers: dimensions; deviations from parallelism of bases and from perpendicularity of sides and bases; apparent density; moisture content,; behaviour under compression; extraction and penetration strengths; absorption; and capillarity. Sealing behaviour will be covered later. Contains sampling, reagents, apparatur, test conditions, various tests and test report.
|
Withdrawn |
1991-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 9986:1990 |
Composition cork for shoe outsoles |
Specifies requirements for test methods for composition cork for the manufacture of outsoles of shoes and boots.
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
61.060
Footwear
;
79.100
Cork and cork products
|
| ISO 9986:2014 |
Composition cork for shoe outsoles |
ISO 9986:2014 specifies requirements for test methods as regards composition cork for the manufacture of outsoles of shoes and boots.
|
Withdrawn |
2014-09 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
61.060
Footwear
;
79.100
Cork and cork products
|
| ISO 10106:2003 |
Cork stoppers — Determination of global migration |
ISO 10106:2003 specifies a test method to measure the global migration of cork stoppers.
It is applicable to all types of cork stoppers that are ready to use.
|
Withdrawn |
2003-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 10106:2018 |
Cork stoppers — Determination of global migration |
This document specifies a test method to measure the global migration of cork stoppers.
It is applicable to all types of cork stoppers that are ready to use, simulating the real conditions of use. This includes all kind of cork stoppers (completely or partially inserted in the bottle neck).
A bottle with an adequate finish is used to carry out the test.
|
Withdrawn |
2018-10 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 10106:2021 |
Cork stoppers — Determination of global migration |
This document specifies a test method to measure the global migration of cork stoppers.
It is applicable to all types of cork stoppers that are ready to use, simulating the real conditions of use. This includes all kind of cork stoppers (completely or partially inserted in the bottle neck).
A bottle with an adequate finish is used to carry out the test.
|
Published |
2021-06 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 10718:1993 |
Cork stoppers — Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium |
The principle of the method specified consists in direct counting of the colonies by incubation in malt extract broth, using a membrane filtration procedure. Applies to cork stoppers which were submitted to sanitizing procedures and are contained in sealed packages.
|
Withdrawn |
1993-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
;
07.100.99
Other standards related to microbiology
|
| ISO 10718:2002 |
Cork stoppers — Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium |
ISO 10718:2002 specifies a method to enumerate the colony-forming units of yeasts, moulds and bacteria which can exist on cork stoppers and can grow in an alcoholic solution under certain conditions.
ISO 10718:2002 applies to cork stoppers which were submitted to the usual sanitizing procedures.
|
Withdrawn |
2002-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
;
07.100.99
Other standards related to microbiology
|
| ISO 10718:2015 |
Cork stoppers — Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium |
ISO 10718:2015 specifies a method to enumerate the colony-forming units of yeasts, moulds and bacteria which can exist on cork stoppers and in an alcoholic solution, and which, under certain conditions, can be extracted during the 3 months following delivery.
ISO 10718:2015 applies to all types of ready-to-use cork stoppers, submitted to a sanitation process and packaged in properly aseptic and hermetic conditions.
ISO 10718:2015 specifies the limit values of the colony-forming units of yeasts, moulds and bacteria which can be found on cork stoppers submitted to the test procedures included in this standard.
|
Published |
2015-10 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
;
07.100.99
Other standards related to microbiology
|
| ISO 16419:2013 |
Cork — Visual anomalies of cork stoppers for still wines |
ISO 16419:2013 applies to semi-elaborated natural cork stoppers and colmated natural cork stoppers at the definitive dimensions stage, and finished natural cork stoppers and colmated natural cork stoppers ready to use.
It describes the anomalies of cork stoppers that can be detected by visual examination by the manufacturer or the end-user.
These anomalies, according to their size, can have functional or not functional consequences being able to alter, more or less, the cork stoppers' sealing capacity.
On the basis of a common sampling example, ISO 16419:2013 proposes, for all these anomalies, some specifications for stoppers.
|
Published |
2013-01 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 16420:2013 |
Cork — Cork stoppers for still wines — Mechanical and physical specifications |
ISO 16420:2013 defines, for each type of ready-to-use, cylindrical cork stopper for still wines (colmated or non-colmated natural cork stoppers, agglomerate cork stoppers, 1 + 1 stoppers), a set of specifications corresponding to different tested parameters.
For all parameters, this set of specifications comprises a proposal for the number of stoppers to be tested (incremental sample); an acceptable quality level and, for certain parameters: nominal value or values; specification limits (or "tolerances").
For cork stoppers for still wines, and for certain parameters, the concept of a range is introduced, with 3 decreasing levels of requirements: upper range; standard range; entry level.
It is, therefore, up to the consumer to specify, for each batch of cork stoppers ordered, what their needs are based on these three specification levels (or ranges).
It is also up to each supplier, besides a commercial reference for each batch of cork stoppers, to define which range applies in terms of the requirements in ISO 16420:2013.
The sampling method, as well as the possible repetitions of incremental samples are defined by the sampling standard (currently being drafted) or defined jointly by the consumer and the supplier.
The stoppers tested shall comply with the requirements of ISO 9727.
|
Published |
2013-01 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 17727:2012 |
Cork — Cork stoppers for still wine — Sampling plan for the quality control of cork stoppers |
ISO 17727:2012 describes the quality control sampling plans for the receipt and shipping of ready-to-use cylindrical stoppers (flush with cork mouth finish) in semi-worked or finished cork used for still wines.
These sampling plans apply to the following parameters, for which a standardized analysis method is available. These are the parameters which are applicable to:
physical tests: dimensions, mass and apparent density for agglomerate cork stoppers, moisture content, dimensional recovery after compression, extraction force, liquid tightness and dust content (see ISO 9727);
chemical tests: analysis of oxidizing residues (see ISO 21128);
microbiological tests: enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium (see ISO 10718);
sensory analysis (see ISO 22308);
the analysis of releasable 2, 4, 6-trichloroanisole (TCA) (see ISO 20752).
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO/WD 17727 |
Cork — Cork stoppers for still wine — Sampling plan for the quality control of cork stoppers |
|
Deleted |
|
Edition : 2 |
|
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 20752:2007 |
Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA) |
ISO 20752:2007 specifies a test method to determine realisable 2,4,6-trichloroanisol (TCA) from cork stoppers.
ISO 20752:2007 is applicable to all types of cork stoppers.
|
Withdrawn |
2007-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
79.100
Cork and cork products
|
| ISO 20752:2014 |
Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA) |
ISO 20752:2014 specifies a test method to determine releasable 2,4,6-trichloroanisol (TCA) from cork stoppers.
It is applicable to all types of cork stoppers and all their cork constituents.
|
Published |
2014-06 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
79.100
Cork and cork products
|
| ISO/DIS 20752 |
Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA) |
|
Under development |
|
Edition : 3 |
Number of pages : 6 |
Technical Committee |
79.100
Cork and cork products
|
| ISO 21128:2006 |
Cork stoppers — Determination of oxidizing residues — Iodometric titration method |
ISO 21128:2006 specifies an iodometric titration method for determining the oxidizing residues released by cork stoppers ready to use.
|
Published |
2006-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
55.100
Bottles. Pots. Jars
;
79.100
Cork and cork products
|
| ISO 22308-1:2021 |
Cork bark selected as bottling product — Part 1: Sensory evaluation — Methodology for sensory evaluation by soaking |
This document defines a test method for the detection, qualification and possible assessment of odours/flavours exogenous to cork bark selected as bottling product in contact with beverages, still, sparkling and sparkling wines, alcohols and spirits, beers and ciders.
This document is applicable to:
— cork bark selected as bottling product in all its forms;
— all cork components of cork stoppers: granules, discs, bodies and shanks;
— all types of cork stoppers, semi-finished (shaped), semi-finished (semi-finished stoppers possibly washed and possibly colmated and/or coated) or ready for use (semi-finished stoppers, possibly branded and surface treated).
|
Published |
2021-01 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
67.240
Sensory analysis
;
79.100
Cork and cork products
|
| ISO 22308:2005 |
Cork stoppers — Sensory analysis |
ISO 22308:2005 defines a test method for detecting, qualifying and eventually evaluating the exogenous odours/flavours of cork stoppers.
ISO 22308:2005 is applicable to all kinds of cork stoppers, ready for use, designed to be in contact with alcoholic drinks.
|
Withdrawn |
2005-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
67.240
Sensory analysis
;
79.100
Cork and cork products
|
| ISO/R 475:1966 |
Dimensions of rectangular refractory bricks |
|
Withdrawn |
1966-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
81.080
Refractories
|
| ISO 528:1983 |
Refractory products — Determination of pyrometric cone equivalent (refractoriness) |
The specified method is used for determining the pyrometric cone equivalent (refractoriness) of siliceous, low alumina fireclay and fireclay refractory materials and products. Its usefull range of application depends on the availability of suitable pyromeric reference cones. It may also be used for roughly determining the refractoriness of other refractory materials. The pyrometric cone equivalent of the test material is expressed by the number or numbers of the pyrometric reference cone or cones.
|
Published |
1983-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 836:2001 |
Terminology for refractories |
This International Standard describes terms used in International Standards dealing with refractory materials and products and that assist in the understanding of the terms and the standards themselves. The descriptions are those generally understood within the refractories industry and should not be taken as absolute definitions.
|
Published |
2001-03 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
81.080
Refractories
;
01.040.81
Glass and ceramics industries (Vocabularies)
|
| ISO/R 836:1968 |
Vocabulary for the refractories industry |
|
Withdrawn |
1968-10 |
Edition : 1 |
Number of pages : 144 |
Technical Committee |
81.080
Refractories
;
01.040.81
Glass and ceramics industries (Vocabularies)
|
| ISO 1109:1975 |
Refractory products — Classification of dense shaped refractory products |
|
Withdrawn |
1975-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO/R 1145:1969 |
Dimensions of refractory arch bricks |
|
Withdrawn |
1969-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
81.080
Refractories
|
| ISO 1893:1989 |
Refractory products — Determination of refractoriness-under-load (differential - with rising temperature) |
Specifies a method for determining the deformation of a refractory product subjected to a constant load under conditions of progressively rising temperature, or "refractoriness under load" - differential method, with rising temperature. The test may be carried out up to maximum temperature of 1700 C.
|
Withdrawn |
1989-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.080
Refractories
|
| ISO 1927:1984 |
Prepared unshaped refractory materials (dense and insulating) — Classification |
|
Withdrawn |
1984-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 1893:2005 |
Refractory products — Determination of refractoriness-under-load — Differential method with rising temperature |
ISO 1893:2005 specifies a method for determining the deformation of dense and insulating shaped refractory products subjected to a constant load under conditions of progressively rising temperature (or refractoriness-under-load) by a differential method, with rising temperature. The test may be carried out up to a maximum temperature of 1 700 °C.
|
Withdrawn |
2005-03 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
81.080
Refractories
|
| ISO 1893:2007 |
Refractory products — Determination of refractoriness under load — Differential method with rising temperature |
ISO 1893:2007 specifies a method for determining the deformation of dense and insulating shaped refractory products, when subjected to a constant load under conditions of progressively rising temperature (or refractoriness under load), by a differential method. The test may be carried out up to a maximum temperature of 1700 °C.
|
Published |
2007-09 |
Edition : 3 |
Number of pages : 12 |
Technical Committee |
81.080
Refractories
|
| ISO 1927-1:2012 |
Monolithic (unshaped) refractory products — Part 1: Introduction and classification |
ISO 1927-1:2012 defines terms relating to monolithic (unshaped) refractory products and establishes a classification for the various types of product.
Raw materials and crushed or granulated refractory materials, which do not contain any binder, are excluded.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
81.080
Refractories
|
| ISO 1927-2:2012 |
Monolithic (unshaped) refractory products — Part 2: Sampling for testing |
ISO 1927-2:2012 gives guidance on the sampling of monolithic (unshaped) refractory materials for the purpose of inspection and testing for quality and general information on the reduction and treatment of samples prior to testing. It covers all materials formulated as monolithic refractory materials.
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
81.080
Refractories
|
| ISO 1927-3:2012 |
Monolithic (unshaped) refractory products — Part 3: Characterization as received |
ISO 1927-3:2012 specifies the methods for the characterization of monolithic (unshaped) refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating), gunning materials tap hole clay, injection mixes, dry vibrating mixes, and ramming materials, as defined in ISO 1927-1.
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
81.080
Refractories
|
| ISO 1927-4:2012 |
Monolithic (unshaped) refractory products — Part 4: Determination of consistency of castables |
ISO 1927-4:2012 describes methods for the determination and measurement of the consistency of dense and insulating castables as defined in ISO 1927-1:2012. It is applicable to all types of dense regular castables, dense deflocculated castables and insulating castables to determine the liquid addition necessary for preparing test pieces according to ISO 1927-5:2012.
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.080
Refractories
|
| ISO 1927-5:2012 |
Monolithic (unshaped) refractory products — Part 5: Preparation and treatment of test pieces |
ISO 1927-5:2012 specifies methods for the preparation and treatment (curing, drying and firing) of test pieces from monolithic (unshaped) refractory materials.
The methods are applicable to dense and insulating castables and to ramming materials with the four types of chemical composition defined in ISO 1927-1:2012.
The dimensions of the test pieces are specified and the preparation of the mixture, compaction methods, storage and post-treatment of the test pieces are described.
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
81.080
Refractories
|
| ISO 1927-6:2012 |
Monolithic (unshaped) refractory products — Part 6: Measurement of physical properties |
ISO 1927-6:2012 specifies methods for the determination of properties of unshaped materials from test pieces prepared and stored according to ISO 1927-5:2012.
The methods are applicable to dense and insulating castables and to ramming materials (including plastics) as defined in ISO 1927-1:2012 before and after firing.
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
81.080
Refractories
|
| ISO 1927-7:2012 |
Monolithic (unshaped) refractory products — Part 7: Tests on pre-formed shapes |
ISO 1927-7:2012 specifies methods for the testing of as-delivered pre-formed shapes. It applies to shapes fabricated from dense and insulating castables and ramming materials as defined in ISO 1927-1.
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
81.080
Refractories
|
| ISO 1927-8:2012 |
Monolithic (unshaped) refractory products — Part 8: Determination of complementary properties |
ISO 1927-8:2012 specifies methods for the determination of the properties of unshaped refractory materials from test pieces prepared and stored in accordance with ISO 1927-5. The methods complement those described in ISO 1927-6.
The methods have been adapted from standards for shaped refractory products to make them applicable to dense and insulating castables, and ramming materials as defined in ISO 1927-1, before and after firing.
|
Published |
2012-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 1927:1975 |
Refractory products — Classification of prepared unshaped refractory materials (dense and insulating) |
|
Withdrawn |
1975-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
81.080
Refractories
|
| ISO 2245:1990 |
Shaped insulating refractory products — Classification |
Establishes a classification of shaped insulating refractory products based on the determination of permanent change in dimensions (ISO 2477) Does not apply to products composed mainly of fibres.
|
Withdrawn |
1990-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 2245:2006 |
Shaped insulating refractory products — Classification |
ISO 2245:2006 specifies a classification of shaped insulating refractory products, based on the determination of permanent change in dimension on heating, with a secondary classification based on bulk density to cover lightweight products (Class L). Products composed of ceramic fibres are excluded.
|
Published |
2006-08 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 2246:1972 |
Dense shaped refractory products — Nomenclature of manufacturing processes |
|
Withdrawn |
1972-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
81.080
Refractories
;
01.040.81
Glass and ceramics industries (Vocabularies)
|
| ISO 2477:1973 |
Shaped insulating refractory products — Determination of the permanent change in dimensions on heating |
|
Withdrawn |
1973-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
81.080
Refractories
|
| ISO 2477:1987 |
Shaped insulating refractory products — Determination of permanent change in dimensions on heating |
Specifies a method for determining the permanent change in dimensions on heating of a shaped insulating refractory product. A figure shows the position of measurements and mounting of the test pieces in the furnace. This second edition cancels and replaces the first edition (1973).
|
Withdrawn |
1987-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
81.080
Refractories
|
| ISO 2477:2005 |
Shaped insulating refractory products — Determination of permanent change in dimensions on heating |
ISO 2477:2005 describes a method for determining the permanent change in dimensions on heating of a shaped insulating refractory product.
|
Published |
2005-06 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
81.080
Refractories
|
| ISO 2478:1973 |
Dense shaped refractory products — Determination of the permanent changes in dimensions on heating |
|
Withdrawn |
1973-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 2478:1987 |
Dense shaped refractory products — Determination of permanent change in dimensions on heating |
|
Published |
1987-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 3187:1989 |
Refractory products — Determination of creep in compression |
|
Published |
1989-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
81.080
Refractories
|
| ISO 5013:1985 |
Refractory products — Determination of modulus of rupture at elevated temperatures |
Specifies a method for the determination of the refractory products at elevated temperatures, under conditions of a constant rate of increase of stress. A method for determination of the same property at ambient temperature is given in ISO 5014. The modulus of rupture is the ratio of the bending moment at the point of failure to the moment of resistance (the section modulus). It is calculated from an equation which is derived from Hooke' s Law for elastic materials.
|
Published |
1985-01 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 5014:1986 |
Refractory products — Determination of modulus of rupture at ambient temperature |
|
Withdrawn |
1986-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 5014:1997 |
Dense and insulating shaped refractory products — Determination of modulus of rupture at ambient temperature |
|
Published |
1997-07 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 5016:1986 |
Shaped insulating refractory products — Determination of bulk density and true porosity |
|
Withdrawn |
1986-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 5016:1997 |
Shaped insulating refractory products — Determination of bulk density and true porosity |
|
Published |
1997-07 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 5017:1988 |
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity |
|
Withdrawn |
1988-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
81.080
Refractories
|
| ISO 5017:1998 |
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity |
|
Withdrawn |
1998-07 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
81.080
Refractories
|
| ISO 5017:2013 |
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity |
ISO 5017:2013 specifies a method for the determination of the bulk density, apparent porosity and true porosity of dense shaped refractory products.
|
Published |
2013-01 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
81.080
Refractories
|
| ISO 5018:1983 |
Refractory materials — Determination of true density |
Establishes a method for measuring the true density of refractory products and raw materials. It is defined as the ratio of the mass of a quantity of dried material to its true volume and is calculated from the expression is the density of the liquid used at the temperature of the thermostatically controlled bath, and m1, m2, m3 are the masses determined in accordance with clause 7.
|
Published |
1983-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 5019-1:1984 |
Refractory bricks — Dimensions — Part 1: Rectangular bricks |
This part of ISO specifies the dimensions ot two series of rectangular refractory bricks. These two series of bricks may be used in conjunction with the series of arch bricks whose dimensions are specified in ISO 5019/2. However, the sizes of refractory bricks here listed are only a limited number of the size currently in production in many countries, but it is believed that size specified in this document include those most commonly used in furnace construction.
|
Published |
1984-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 5019-2:1984 |
Refractory bricks — Dimensions — Part 2: Arch bricks |
|
Published |
1984-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 5019-3:1984 |
Refractory bricks — Dimensions — Part 3: Rectangular checker bricks for regenerative furnaces |
|
Published |
1984-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
81.080
Refractories
|
| ISO 5019-4:1984 |
Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs |
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 5019-4:1988 |
Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs |
|
Published |
1988-11 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 5019-5:1984 |
Refractory bricks — Dimensions — Part 5: Skewbacks |
|
Published |
1984-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 5019-6:1984 |
Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters |
This part of ISO 5019 specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters. It provides for twelve thicknesses of lining, rising from a minimum of 25 mm to a maximum of 800 mm in steps of 50 mm. For information, the calculated volume of each size of brick is shown in a table, and also the internal diameter of lining for which each size is suitable, if used alone. These diameter have been calculated with no allowance for joint thicknesses.
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
81.080
Refractories
|
| ISO 5019-6:2005 |
Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters |
ISO 5019-6:2005 specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters.
|
Published |
2005-10 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 5022:1979 |
Shaped refractory products — Sampling and acceptance testing |
Gives directives for sampling shaped refractory products and for obtaining, from a sample of the smallest possible size, the most precise assexxment possible, of the quality of a consignment. The methods described make it possible to carry out an acceptance test based on an assessment of the extent to which the specifications have been observed, but do not make it possible to determine whether the accepted consignment is suitable for a given application or to compare different qualities of parts for this same purpose.
|
Published |
1979-12 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
81.080
Refractories
|
| ISO 5417:1986 |
Refractory bricks for use in rotary kilns — Dimensions |
|
Published |
1986-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 8656-1:1988 |
Refractory products — Sampling of raw materials and unshaped products — Part 1: Sampling scheme |
|
Published |
1988-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.080
Refractories
|
| ISO 10059-1:1992 |
Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing |
Specifies the principle, the apparatus, the test pieces, the test procedure, the expression of results and the test report.
|
Published |
1992-02 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 8840:1987 |
Refractory materials — Determination of bulk density of granular materials (grain density) |
Two methods for the determination of the bulk density of granular refractory materials (grain density) having a grain size larger than 2mm are specified. Method 1 (mercury method with vacuum) is intended as a referee method. Method 2 is the arrested water absorption method. The two methods may give different results. Any statement of the value of a bilk density shall therefore be accompanied by an indication of the method used. The same method shall be used for the determination of the volume of the sample, for selecting and preparing the sample, for calculating the bulk density and for presenting the test report.
|
Withdrawn |
1987-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 8840:2021 |
Refractory materials — Determination of bulk density of granular materials (grain density) |
This document specifies three methods for the determination of the bulk density of granular refractory materials (grain density) having a grain size larger than 2 mm:
— Method 1: mercury method with vacuum;
— Method 2: arrested water absorption method;
— Method 3: vacuum method with spin dryer option according to ISO 5017.
Method 1 is intended as the reference method.
NOTE Depending on the nature of the material tested, the three methods can give different results. Any statement of the value of a bulk density can therefore be accompanied by an indication of the method used or to be used in case of dispute.
The same method can be used for the determination of the volume of the sample, for selecting and preparing the sample, for calculating the bulk density and for presenting the test report.
|
Published |
2021-09 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
81.080
Refractories
|
| ISO 8841:1991 |
Dense, shaped refractory products — Determination of permeability to gases |
The method specified takes account of the dynamic viscosity of the gas, and therefore the results obtained may not be directly comparable with those obtained by earlier methods. Describes the principle, the apparatus, the test pieces and procedure, the expression of results, and the contents of the test report.
|
Published |
1991-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 8890:1988 |
Dense shaped refractory products — Determination of resistance to sulfuric acid |
|
Published |
1988-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 8894-1:1987 |
Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire method (cross-array) |
Belongs to a series of standard and specifies a hot-wire method for the determination of the thermal conductivety of refractory products. The method is applicable at temperatures not higher than 1250 °C and to materials whose thermal conductivity is less than 1,5 W/(m.k) and whose thermal diffusivity is less than 10-6 m2/s. Subject to the limits in 1.2, the method is applicable to powdered or granular materials. It is not applicable to refractory materials consisting of or containing fibres.
|
Withdrawn |
1987-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
81.080
Refractories
|
| ISO 8894-1:2010 |
Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods (cross-array and resistance thermometer) |
This part of ISO 8894 describes the hot-wire methods (“cross-array” and “resistance thermometer”) for the determination of the thermal conductivity of non-carbonaceous, dielectric refractory products and materials.
This methods are applicable to dense and insulating refractories (shaped products, refractory castables, plastic refractories, ramming mixes, powdered or granular materials) with thermal conductivity values less than 1,5 W/m×K (“cross-array”) and less than 15 W/m×K (“resistance thermometer”) and thermal diffusivity values less than 5 x 10-6 m2/s.
|
Published |
2010-05 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
81.080
Refractories
|
| ISO 8894-2:1990 |
Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method (parallel) |
Specifies a hot-wire method for the determination of the thermal conductivity of refractory products and materials. Is applicable at temperatures up to and including 1250°C and to materials with a thermal conductivity less than 25 W/(m.K); does not apply to electrically conducting materials.
|
Withdrawn |
1990-11 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
81.080
Refractories
|
| ISO 8894-2:2007 |
Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method (parallel) |
ISO 8894-2:2007 describes a hot-wire (parallel) method for the determination of the thermal conductivity of refractory products and materials.
|
Published |
2007-12 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
81.080
Refractories
|
| ISO 8895:1986 |
Shaped insulating refractory products — Determination of cold crushing strength |
|
Withdrawn |
1986-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 8895:2004 |
Shaped insulating refractory products — Determination of cold crushing strength |
ISO 8895:2004 specifies a method for determining the cold crushing strength of shaped insulating refractory products.
|
Published |
2004-09 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 9205:1988 |
Refractory bricks for use in rotary kilns — Hot-face identification marking |
|
Published |
1988-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
81.080
Refractories
|
| ISO 10059-2:2003 |
Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing |
ISO 10059-2:2003 specifies a method for the determination of the cold compressive strength of dense shaped refractory products as an alternative to that described in ISO 10059-1:1992.
|
Published |
2003-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 10060:1993 |
Dense, shaped refractory products — Test methods for products containing carbon |
Specifies test methods for refractory products containing residual carbon, the remainder being essentially sintered or fused doloma, magnesia or a mixture of these substances. The methods specified are based on determining the physical properties, both before and after the removal of volatile components by carbonization.
|
Published |
1993-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
81.080
Refractories
|
| ISO 10080:1990 |
Refractory products — Classification of dense, shaped acid-resisting products |
Establishes a classification of dense, shaped acid-resisting refractory products complying with the criteria defined in ISO 1109. Defines three groups of acid-resistance.
|
Published |
1990-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 10081-1:1991 |
Basic refractory products — Classification — Part 1: Products containing less than 7 % residual carbon |
Establishes the classification and designation of products. Applies to dense, shaped products, with or without metal plates and reinforcement. Products containing 7 % or more residual carbon will be subject of a subsequent classification.
|
Withdrawn |
1991-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 10081-1:2003 |
Classification of dense shaped refractory products — Part 1: Alumina-silica |
ISO 10081-1:2003 specifies the classification and designation of dense shaped refractory products of the alumina-silica series, with the following exceptions: products containing more than 5 % of any metallic oxide other than alumina, silica, iron oxide; and products containing more than 1 % carbon, carbides, nitrides, oxynitrides or any associated materials.
|
Published |
2003-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
81.080
Refractories
|
| ISO 10081-2:2003 |
Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon |
ISO 10081-2:2003 specifies the classification and designation of dense shaped basic refractory products with or without antioxidant additives. Products containing 7 % or more residual carbon after coking are excluded from this classification. The classification is applicable to dense shaped products with or without metal plates and reinforcement.
|
Published |
2003-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
81.080
Refractories
|
| ISO 10081-2:2003/Cor 1:2008 |
Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon — Technical Corrigendum 1 |
|
Published |
2008-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
81.080
Refractories
|
| ISO 10081-3:2003 |
Classification of dense shaped refractory products — Part 3: Basic products containing from 7 % to 50 % residual carbon |
ISO 10081-3:2003 specifies the classification and designation of dense shaped basic refractory products containing 7 % or more but less than 50 % residual carbon after coking. It is applicable to products with or without antioxidant additives, with or without metal plates and reinforcement.
|
Published |
2003-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 10081-4:2007 |
Classification of dense shaped refractory products — Part 4: Special products |
ISO 10081-4:2007 specifies the classification and designation of dense shaped refractory products of special composition including oxide products, oxide and non-oxide products, non-oxide silicon carbide or carbon-based products, and further special products which are only designated but not classified, for example, non-oxide products, such as boride, nitride or further combinations of the series given above.
|
Withdrawn |
2007-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
81.080
Refractories
|
| ISO 10081-4:2014 |
Classification of dense shaped refractory products — Part 4: Special products |
ISO 10081-4:2014 specifies the classification and designation of dense shaped refractory products of special composition including oxide products, oxide and non-oxide products, non-oxide silicon carbide or carbon-based products, and further special products which are only designated but not classified, for example non-oxide products, such as boride, nitride or further combinations of the series given above.
|
Published |
2014-09 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
81.080
Refractories
|
| ISO 10635:1999 |
Refractory products — Methods of test for ceramic fibre products |
This International Standard specifies methods for determining the thickness, bulk density, resilience, permanent
linear change on heating, thermal conductivity, tensile strength and shot content of ceramic fibre products. It applies
to ceramic fibre bulk, blankets, felts, mats, boards, papers and pre-formed shapes with the exception of products
delivered in a wet state.
The application of the individual test methods is given in table 1, with reference to the type of products.
|
Published |
1999-06 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
81.080
Refractories
|
| ISO 12676:2000 |
Refractory products — Determination of resistance to carbon monoxide |
This International Standard specifies a method for determining the comparative resistance of refractory materials to
carbon monoxide disintegration.
The test is intended to be more severe than conditions encountered in service in order to enable probable behaviour
of refractory materials to be assessed in a relatively short time.
|
Published |
2000-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
81.080
Refractories
|
| ISO 12677:2003 |
Chemical analysis of refractory products by XRF — Fused cast bead method |
ISO 12677:2003 specifies a method for chemical analysis of refractory products and materials, and technical ceramics composed of oxides, including the determination of oxide at levels between 0,01 % and 99 % by means of the XRF fused cast bead method.
|
Withdrawn |
2003-05 |
Edition : 1 |
Number of pages : 74 |
Technical Committee |
81.080
Refractories
|
| ISO 12677:2011 |
Chemical analysis of refractory products by X-ray fluorescence (XRF) — Fused cast-bead method |
ISO 12677:2011 specifies a method for the chemical analysis of refractory and technical ceramic raw materials, intermediates and products, by means of the X-ray fluorescence (XRF) fused cast-bead method. Typical materials that can be analysed by ISO 12677:2011 are given in Clause 3. ISO 12677:2011 is not applicable to non-oxide materials, such as silicon carbides or nitrides, etc. The method is applicable to a wide range of materials containing a wide range of elements.
|
Published |
2011-10 |
Edition : 2 |
Number of pages : 75 |
Technical Committee |
81.080
Refractories
|
| ISO 12678-1:1996 |
Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 1: Dimensions and conformity to drawings |
|
Published |
1996-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
81.080
Refractories
|
| ISO 12678-2:1996 |
Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 2: Corner and edge defects and other surface imperfections |
|
Published |
1996-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
81.080
Refractories
|
| ISO 12680-1:2005 |
Methods of test for refractory products — Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration |
ISO 12680-1:2005 specifies a method for determining the dynamic Young's modulus of rectangular cross-section bars and circular cross-section specimens of refractories by impulse excitation of vibration. The dynamic Young's modulus is determined using the resonant frequency of the specimen in its flexural mode of vibration.
|
Published |
2005-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
81.080
Refractories
|