| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 506:1985 |
Natural rubber latex concentrate — Determination of volatile fatty acid number |
|
Withdrawn |
1985-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 506:1992 |
Rubber latex, natural, concentrate — Determination of volatile fatty acid number |
The method is not necessarily suitable for latices from natural sources other than Hevea brasiliensis. It is not suitable for compounded latex, vulcanized latex, artificial dispersions of rubber or synthetic rubber latices.
|
Withdrawn |
1992-05 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 506:2020 |
Rubber latex, natural, concentrate — Determination of volatile fatty acid number |
This document specifies a method for the determination of the volatile fatty acid number of natural rubber latex concentrate. The method is not necessarily suitable for latices from natural sources other than Hevea brasiliensis and is not applicable to compounded latex, vulcanized latex, artificial dispersions of rubber or synthetic rubber latices.
|
Published |
2020-04 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 705:1974 |
Natural rubber latex — Determination of density |
|
Withdrawn |
1974-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 705:1994 |
Rubber latex — Determination of density between 5 degrees C and 40 degrees C |
Cancels and replaces the first edition (1974) and amendment 1 (1994). Specifies a method for the determination of the density of natural rubber latex concentrate between the temperatures of 5 °C und 40 °C. Intended for use when density determinations are used to calculate the mass of a measured volume of latex in locations where it is not practical to weigh directly or to control the temperature of the laboratory. The method is suitable for all latices from natural source, for synthetic latex and for compounded or prevulcanized latex as well as for artificial dispersion of rubber.
|
Withdrawn |
1994-08 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 705:2015 |
Rubber latex — Determination of density between 5 degrees C and 40 degrees C |
ISO 705:2015 specifies a method for the determination of the density of natural rubber latex concentrate between the temperatures of 5 °C and 40 °C.
ISO 705:2015 is intended for use when density determinations are used to calculate the mass of a measured volume of latex in locations where it is not practical to weigh directly or to control the temperature of the laboratory.
|
Published |
2015-11 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 706:1976 |
Rubber latices — Determination of coagulum content |
|
Withdrawn |
1976-08 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 706:1985 |
Rubber latex — Determination of coagulum content (sieve residue) |
Specifies a method for the determination of coagulum content (sieve residue) of natural rubber latex concentrates containing preservative agents and also for the determination of the coagulum content (sieve residue) of synthetic rubber latices. Coagulum is defined as the material comprising pieces of coagulated rubber, latex skin and coarse foreign matter, retained unter the conditions of the test on a stainless steel wire cloth with an average aperture width of 180 10 m. It is expressed as a percentage by mass of the latex and given by a formula.
|
Withdrawn |
1985-08 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 706:2004 |
Rubber latex — Determination of coagulum content (sieve residue) |
ISO 706:2004 specifies a method for the determination of the coagulum content (sieve residue) of natural rubber latex concentrate and the majority of synthetic rubber latices. It is not suitable for XSBR latices intended for use in paper coating.
|
Published |
2004-10 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 976:1977 |
Rubber latices — Determination of pH |
|
Withdrawn |
1977-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 976:1986 |
Rubber latices — Determination of pH |
|
Withdrawn |
1986-07 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 11344:2004/Cor 1:2008 |
Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography — Technical Corrigendum 1 |
|
Withdrawn |
2008-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 976:1996 |
Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH |
Gives a method for the determination of the pH of polymer dispersions and rubber latices (natural and synthetic) by means of a pH-meter equipped with a combined glass and silver reference electrode. It is also suitable for prevulcanized latex and compounds containing polymer dispersions, including adhesives. Replaces the second edition.
|
Withdrawn |
1996-06 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 976:1996/Amd 1:2006 |
Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH — Amendment 1: Precision data |
|
Withdrawn |
2006-02 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 976:2013 |
Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH |
ISO 976:2013 specifies a method for the determination of the pH of polymer dispersions and rubber latices (natural and synthetic) by means of a pH-meter equipped with a combined glass and silver reference electrode. The method is also suitable for prevulcanized latex and compounds containing polymer dispersions or rubber latices, including adhesives.
|
Published |
2013-12 |
Edition : 4 |
Number of pages : 9 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1147:1995 |
Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test |
Contains a procedure for the evaluation of the freeze-thaw resistance of polymer dispersions and synthetic rubber latices. Does not apply to natural rubber latex. Replaces the second edition.
|
Published |
1995-12 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
;
83.080.01
Plastics in general
|
| ISO 1409:1983 |
Rubber latex — Determination of surface tension |
|
Withdrawn |
1983-11 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1409:1995 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method |
Describes the determination of the surface tension of polymer dispersions, prevulcanized latices and natural as well as synthetic rubber latices by the ring method (du Nouy-type tensiometer). Applicable for polymer dispersions with a viscosity less than 200 mPa·s. Replaces the third edition.
|
Withdrawn |
1995-12 |
Edition : 4 |
Number of pages : 6 |
Technical Committee |
83.040.10
Latex and raw rubber
;
83.080.01
Plastics in general
|
| ISO 1409:2006 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method |
ISO 1409:2006 specifies a ring method for the determination of the surface tension of polymer dispersions and rubber latices (natural and synthetic).
The method is valid for polymer dispersions and rubber latices with a viscosity less than 200 mPa·s. To achieve this, the dispersion or latex is diluted with water to a mass fraction of total solids of 40 %. If necessary, the solids content is further reduced to ensure that the viscosity is under the specified limit.
The method is also suitable for prevulcanized latices and compounded materials.
|
Withdrawn |
2006-09 |
Edition : 5 |
Number of pages : 7 |
Technical Committee |
83.040.10
Latex and raw rubber
;
83.080.01
Plastics in general
|
| ISO 1409:2020 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension |
This document specifies two methods for the determination of the surface tension of polymer dispersions and rubber latices (natural and synthetic).
— Method A is the ring method (Du Noüy ring method).
— Method B is the plate method (Wilhelmy plate method).
Method A is suitable valid for polymer dispersions and rubber latices with a viscosity less than 200 mPa·s.
Method B is not suitable for polymer dispersions and rubber latices containing cationic surfactants.
Methods A and B are also suitable for prevulcanized latices and compounded material.
In case of dispute, the preferred method is method A (the ring method).
|
Published |
2020-08 |
Edition : 6 |
Number of pages : 12 |
Technical Committee |
83.040.10
Latex and raw rubber
;
83.080.01
Plastics in general
|
| ISO 1629:1976 |
Rubbers and latices — Nomenclature |
|
Withdrawn |
1976-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.060
Rubber
;
01.040.83
Rubber and plastics industries (Vocabularies)
;
83.040.10
Latex and raw rubber
|
| ISO 1629:1987 |
Rubber and latices — Nomenclature |
|
Withdrawn |
1987-11 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.060
Rubber
;
01.040.83
Rubber and plastics industries (Vocabularies)
;
83.040.10
Latex and raw rubber
|
| ISO 2005:1992 |
Rubber latex, natural, concentrate — Determination of sludge content |
The method is not necessarily suitable for latices from natural sources other than Hevea brasiliensis. It is not suitable for compounded latex or vulcanized latex.
|
Withdrawn |
1992-06 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1629:1995 |
Rubber and latices — Nomenclature |
Establishes a system of symbols for the basic rubbers in both dry and latex forms, based on the chemical composition of the polymer chain. Standardizes the terms used in industry and commerce and is not intended to come into conflict with existing trade names and trade marks. Replaces the first edition which has been technically revised.
|
Withdrawn |
1995-11 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.060
Rubber
;
01.040.83
Rubber and plastics industries (Vocabularies)
;
83.040.10
Latex and raw rubber
|
| ISO 1629:1995/Amd 1:2007 |
Rubber and latices — Nomenclature — Amendment 1 |
|
Withdrawn |
2007-12 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
83.060
Rubber
;
01.040.83
Rubber and plastics industries (Vocabularies)
;
83.040.10
Latex and raw rubber
|
| ISO 1629:1995/Amd 1:2007/Cor 1:2009 |
Rubber and latices — Nomenclature — Amendment 1 — Technical Corrigendum 1 |
|
Withdrawn |
2009-07 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
83.060
Rubber
;
01.040.83
Rubber and plastics industries (Vocabularies)
;
83.040.10
Latex and raw rubber
|
| ISO 1629:2013 |
Rubber and latices — Nomenclature |
ISO 1629:2013 establishes a system of symbols for the basic rubbers in both dry and latex forms, based on the chemical composition of the polymer chain. The purpose is to standardize the abbreviated terms used in industry, commerce and government, and it is not intended to conflict with, but rather to act as a supplement to, existing trade names and trademarks.
|
Published |
2013-06 |
Edition : 4 |
Number of pages : 6 |
Technical Committee |
83.060
Rubber
;
01.040.83
Rubber and plastics industries (Vocabularies)
;
83.040.10
Latex and raw rubber
|
| ISO 1652:1974 |
Rubber latex — Determination of viscosity |
|
Withdrawn |
1974-03 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1652:1985 |
Rubber latex — Determination of viscosity |
The method described applies to natural and synthetic rubber latices. Two instruments are specified. The method uses a viscosimeter immersed to a specific depth in the latex. Measurements may be made on the undiluted latex or on the latex after dilution to a required total solids content.
|
Withdrawn |
1985-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1652:2004 |
Rubber latex — Determination of apparent viscosity by the Brookfield test method |
ISO 1652:2004 specifies a method for the determination of the apparent viscosity of both natural rubber latex concentrate and synthetic rubber latices by the Brookfield method. The method is also suitable for the determination of the viscosity of natural latices from sources other than Hevea brasiliensis and also for compounded latices.
|
Withdrawn |
2004-04 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1652:2011 |
Rubber latex — Determination of apparent viscosity by the Brookfield test method |
ISO 1652:2011 specifies a method for the determination of the apparent viscosity of both natural rubber latex concentrate and synthetic rubber latices by the Brookfield method. The method is also suitable for the determination of the viscosity of natural latices from sources other than Hevea brasiliensis and also for compounded latices.
|
Published |
2011-03 |
Edition : 4 |
Number of pages : 9 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO/R 1654:1971 |
Raw rubber and rubber latex — Determination of copper |
|
Withdrawn |
1971-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1655:1975 |
Raw rubber and rubber latex — Determination of manganese content — Potassium periodate photometric method |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1656:1974 |
Raw natural rubber and natural rubber latex — Determination of nitrogen |
|
Withdrawn |
1974-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1656:1988 |
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content |
|
Withdrawn |
1988-10 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1656:1996 |
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content |
Specifies a macro-method and a semi-micro method for the determination of the nitrogen content in raw natural rubber and in natural rubber latex using variants of the Kjeldahl process. Replaces the second edition.
|
Withdrawn |
1996-01 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1656:2014 |
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content |
ISO 1656:2014 specifies a macro-method and a semi-micro method for the determination of nitrogen in raw natural rubber and in natural rubber latex using variants of the Kjeldahl process.
|
Withdrawn |
2014-10 |
Edition : 4 |
Number of pages : 19 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1656:2019 |
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content |
This document specifies a macro-method and a semi-micro method for the determination of nitrogen in raw natural rubber and in natural rubber latex using variants of the Kjeldahl process.
NOTE The determination of nitrogen in natural rubber is usually carried out in order to arrive at an estimate of the protein content. Minor amounts of non-proteinous nitrogen containing constituents are also present. However, in the dry solids prepared from natural rubber latex, these materials can make a substantial contribution to the total nitrogen content.
|
Published |
2019-07 |
Edition : 5 |
Number of pages : 21 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1657:1975 |
Raw rubber and rubber latex — Determination of iron content — 1,10- Phenanthroline photometric method |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1657:1986 |
Rubber, raw and rubber latex — Determination of iron content — 1,10-Phenanthroline photometric method |
Deals with the method given for uncompounded natural rubber and uncompounded synthetic rubbers which do not contain chlorine, and the corresponding uncompounding latices. Principle, reagents, apparatus, sampling and procedure, especially the preparation of the test piece are described. Special precautions and safeguards required are given.
|
Published |
1986-10 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1795:1974 |
Raw rubber in bales — Sampling |
|
Withdrawn |
1974-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1795:1992 |
Rubber, raw, natural and synthetic — Sampling and further preparative procedures |
|
Withdrawn |
1992-08 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1795:2000 |
Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
|
Withdrawn |
2000-08 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1795:2007 |
Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
ISO 1795:2007 specifies a method for the sampling of raw rubber in bales, blocks or packages and further procedures carried out on the samples to prepare test samples for chemical and physical tests.
|
Withdrawn |
2007-05 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1795:2017 |
Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
ISO 1795:2017 specifies a method for the sampling of raw rubber in bales, blocks or packages and further procedures carried out on the samples to prepare test samples for chemical and physical tests.
|
Published |
2017-06 |
Edition : 5 |
Number of pages : 5 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1796:1982 |
Rubber, raw — Sample preparation |
|
Withdrawn |
1982-03 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1802:1974 |
Natural rubber latex — Determination of boric acid |
|
Withdrawn |
1974-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1802:1985 |
Natural rubber latex concentrate — Determination of boric acid content |
|
Withdrawn |
1985-11 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 1802:1992 |
Natural rubber latex concentrate — Determination of boric acid content |
Describes the principle, the reagents, the apparatus, the procedure, the expression of results and the contents of the test report.
|
Published |
1992-03 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2000:1989 |
Rubber, raw natural — Specification |
Specifies the minimum quality requirements and the corresponding methods of test for six grades of raw natural rubber. A table delivers the maximum dirt content and some other characteristics for these grades.
|
Withdrawn |
1989-07 |
Edition : 5 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2005:1992/Amd 1:2006 |
Rubber latex, natural, concentrate — Determination of sludge content — Amendment 1: Precision data |
|
Withdrawn |
2006-02 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2000:2003 |
Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR) |
ISO 2000:2003 provides guidance on the specification of technically specified rubber (TSR). A grading system is proposed, based on the origin of the natural rubber content and on properties exhibited by the rubber.
This International Standard is intended for use by parties involved in the procurement of TSR, and is intended to form a basis from which requirements for a particular case may be more closely specified. As such, it describes a number of criteria that will need to be the subject of appropriate agreement between the interested parties.
|
Withdrawn |
2003-12 |
Edition : 6 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2000:2014 |
Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR) |
ISO 2000:2014 provides guidance on the specification of technically specified rubber (TSR). A grading system is proposed, based on the origin of the natural rubber content and on properties exhibited by the rubber.
ISO 2000:2014 is intended for use by parties involved in the procurement of TSR, and is intended to form a basis from which requirements for a particular case may be more closely specified. As such, it describes a number of criteria that need to be the subject of appropriate agreement between the interested parties.
|
Withdrawn |
2014-06 |
Edition : 7 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2000:2020 |
Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR) |
This document specifies guidance on the specification of technically specified rubber (TSR). A grading system is proposed, based on the origin of the natural rubber content and on properties exhibited by the rubber.
This document is intended for use by parties involved in the procurement of TSR and is intended to form a basis from which requirements for a particular case may be more closely specified. As such, it describes a number of criteria that need to be the subject of appropriate agreement between the interested parties.
|
Published |
2020-07 |
Edition : 8 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2002:1975 |
Raw styrene-butadiene rubber (SBR) — Determination of organic acid content |
|
Withdrawn |
1975-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2003:1975 |
Raw styrene-butadiene rubber (SBR) — Determination of soap content |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2004:1979 |
Rubber latex, natural — Centrifuged or creamed, ammonia-preserved types — Specification |
|
Withdrawn |
1979-07 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2004:1988 |
Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specification |
|
Withdrawn |
1988-09 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2004:1997 |
Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specification |
|
Withdrawn |
1997-10 |
Edition : 4 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2004:2010 |
Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications |
ISO 2004:2010 gives specifications for natural rubber latex concentrate types which are preserved wholly or in part with ammonia and which have been produced by centrifuging or creaming.
|
Withdrawn |
2010-09 |
Edition : 5 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2004:2017 |
Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications |
ISO 2004:2017 gives specifications for natural rubber latex concentrate types which are preserved wholly or in part with ammonia and which have been produced by centrifuging or creaming.
|
Published |
2017-11 |
Edition : 6 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO/DIS 2004 |
Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications |
ISO 2004:2017 gives specifications for natural rubber latex concentrate types which are preserved wholly or in part with ammonia and which have been produced by centrifuging or creaming.
|
Under development |
|
Edition : 7 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2005:1974 |
Natural rubber latex — Determination of sludge content |
|
Withdrawn |
1974-01 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2005:1985 |
Natural rubber latex concentrate — Determination of sludge content |
|
Withdrawn |
1985-10 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 8053:1986 |
Rubber and latex — Determination of copper content — Photometric method |
|
Withdrawn |
1986-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.060
Rubber
;
83.040.10
Latex and raw rubber
|
| ISO 2005:2014 |
Rubber latex, natural, concentrate — Determination of sludge content |
ISO 2005:2014 specifies a method for the determination of the sludge content of natural rubber latex concentrate.
The method is not necessarily suitable for latices from natural sources other than Hevea brasiliensis.
It is not suitable for compounded latex or vulcanized latex.
|
Published |
2014-12 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2006-1:2009 |
Rubber latex, synthetic — Determination of mechanical stability — Part 1: High-speed method |
ISO 2006-1:2009 specifies a method for the determination of the high-speed mechanical stability of synthetic rubber latex. The method is not applicable to compounded synthetic rubber latices.
|
Withdrawn |
2009-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2006-1:2022 |
Rubber latex, synthetic — Determination of mechanical stability — Part 1: High-speed method |
This document specifies a method for the determination of the high-speed mechanical stability of synthetic rubber latex.
The method is not applicable to compounded synthetic rubber latices.
|
Published |
2022-08 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2006-2:2009 |
Rubber latex, synthetic — Determination of mechanical stability — Part 2: Moderate-speed method under load |
ISO 2006-2:2009 specifies a method for the determination of the mechanical stability of synthetic rubber latex. This method measures the mass of coagulum formed when a test portion of latex is stirred for a specified length of time at moderate speed under a relatively high shear stress achieved by applying a load.
|
Published |
2009-08 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2006:1974 |
Synthetic rubber latex — Determination of high-speed mechanical stability |
|
Withdrawn |
1974-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2006:1985 |
Rubber latex, synthetic — Determination of high-speed mechanical stability |
Specifies a stirring disk which has a greater diameter than that specified in ISO 35. The test is applicable for two viscosities of latices which are given in detail. The duration of stirring shall be agreed between the interested parties and shall not be longer than 30 min or less than 1 min. In case of a latex which contains ammonia the curation of stirring shall be limited. A formula for the expression of the results is given. Replaces the first edition (ISO 2006-1974) by a minor revision.
|
Withdrawn |
1985-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2007:1981 |
Rubber, unvulcanized — Determination of plasticity — Rapid plastimeter method |
|
Withdrawn |
1981-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2008:1980 |
Rubber latex, styrene-butadiene — Determination of volatile unsaturates |
|
Withdrawn |
1980-04 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2008:1987 |
Rubber latex, styrene-butadiene — Determination of volatile unsaturates |
|
Withdrawn |
1987-06 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2027:1978 |
Rubber, natural latex, evaporated, preserved — Specification |
|
Withdrawn |
1978-05 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2027:1990 |
Natural rubber latex concentrate, evaporated, preserved — Specification |
Specifies requirements for three types of latex. The requirements are given in a table. Constitutes a minor revision of the second edition (ISO 2027-1978).
|
Published |
1990-02 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2028:1982 |
Rubber — Synthetic latices — Preparation of dry polymer |
|
Withdrawn |
1982-04 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2028:1989 |
Rubber — Synthetic latices — Preparation of dry polymer |
|
Withdrawn |
1989-07 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2028:1999 |
Synthetic rubber latex — Preparation of dry polymer |
|
Withdrawn |
1999-12 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2028:2015 |
Synthetic rubber latex — Preparation of dry polymer |
ISO 2028:2015 specifies four methods for the isolation of dry polymer from synthetic polymer latices containing anionic surfactants, for the purpose of subsequent testing. Tests to be performed include the determination of the Mooney viscosity, the bound-styrene or acrylonitrile content in the polymer chain or the mill shrinkage.
|
Published |
2015-06 |
Edition : 5 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2115:1996 |
Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature |
Provides a method for the determination of the white point temperature and the minimum film-forming temperature of polymer dispersions. Replaces the second edition, which has been extended and harmonized.
|
Published |
1996-02 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
83.040.10
Latex and raw rubber
;
83.080.01
Plastics in general
|
| ISO 2322:1981 |
Rubber, raw styrene-butadiene, emulsion polymerized — Test recipe and method of evaluation |
|
Withdrawn |
1981-11 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2438:1981 |
Rubber latex, synthetic — Codification |
|
Withdrawn |
1981-08 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2453:1975 |
Styrene-butadiene copolymers — Determination of bound styrene content |
|
Withdrawn |
1975-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2453:1991 |
Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method |
|
Withdrawn |
1991-06 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2453:1991/Cor 1:2003 |
Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method — Technical Corrigendum 1 |
|
Withdrawn |
2003-08 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2453:2020 |
Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method |
This document specifies a method for determining the bound styrene content of emulsion-polymerized styrene-butadiene rubbers (SBR) by correlation with the measured refractive index of an extracted sample according to a table of refractive indices versus percentage mass fractions styrene.
The method is also applicable to extracted oil-extended emulsion-polymerized SBR as long as it produces a film suitable for refractive index measurements. It is not applicable to solution-polymerized SBR.
|
Published |
2020-05 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO/TR 2630:1978 |
Rubbers, raw — Sampling for inspection by variables |
|
Withdrawn |
1978-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2930:1981 |
Rubber, raw natural — Determination of plasticity retention index (PRI) |
|
Withdrawn |
1981-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2930:1995 |
Rubber, raw natural — Determination of plasticity retention index (PRI) |
Cancels and replaces the second edition (1981). Specifies a method for determining the plasticity retention index (PRI) of raw natural rubber. The PRI is a measure of the resistance of raw natural rubber to thermal oxidation. A high resistance to thermal oxidation is shown as a high value of the index.
|
Withdrawn |
1995-06 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2930:1995/Amd 1:2008 |
Rubber, raw natural — Determination of plasticity retention index (PRI) — Amendment 1 |
|
Withdrawn |
2008-10 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2930:2009 |
Rubber, raw natural — Determination of plasticity retention index (PRI) |
ISO 2930:2009 specifies a method for determining the plasticity retention index (PRI) of raw natural rubber.
The PRI is a measure of the resistance of raw natural rubber to thermal oxidation. A high resistance to thermal oxidation is shown as a high value of the index.
|
Withdrawn |
2009-12 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 2930:2017 |
Rubber, raw natural — Determination of plasticity retention index (PRI) |
ISO 2930:2017 specifies a method for determining the plasticity retention index (PRI) of raw natural rubber.
The PRI is a measure of the resistance of raw natural rubber to thermal oxidation. A high resistance to thermal oxidation is shown as a high value of the index. PRI is not an absolute value and cannot give an absolute classification of plasticity number of different natural rubber after oxidation.
|
Published |
2017-08 |
Edition : 5 |
Number of pages : 9 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO/DIS 2930 |
Rubber, raw natural — Determination of plasticity retention index (PRI) |
ISO 2930:2017 specifies a method for determining the plasticity retention index (PRI) of raw natural rubber.
The PRI is a measure of the resistance of raw natural rubber to thermal oxidation. A high resistance to thermal oxidation is shown as a high value of the index. PRI is not an absolute value and cannot give an absolute classification of plasticity number of different natural rubber after oxidation.
|
Under development |
|
Edition : 6 |
Number of pages : 7 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 3136:1983 |
Rubber latex — Styrene-butadiene — Determination of bound styrene content |
Specifies a method for the determination of the bound styrene content of styrene-butadiene rubber (SBR) latices. Applicable to hot emulsion polymerized SBR latices having a bound styrene content of up to 55 % and to cold emulsion polymerized SBR latices having a bound styrene content between 18 and 40 %. This second edition cancels and replaces the first edition (1975).
|
Published |
1983-04 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 3136 |
Rubber latex — Styrene-butadiene — Determination of bound styrene content |
Specifies a method for the determination of the bound styrene content of styrene-butadiene rubber (SBR) latices. Applicable to hot emulsion polymerized SBR latices having a bound styrene content of up to 55 % and to cold emulsion polymerized SBR latices having a bound styrene content between 18 and 40 %. This second edition cancels and replaces the first edition (1975).
|
Under development |
2023-05 |
Edition : 3 |
|
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 3899:1976 |
Rubber — Nitrile latex — Determination of residual acrylonitrile content |
|
Withdrawn |
1976-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 3899:1988 |
Rubber — Nitrile latex — Determination of residual acrylonitrile content |
Refers to latices with a residual acrylonitrile content of less than 0.2 % (m/m). Test portions of latex are distilled, the distillate is collected in methanol. Addition of n-dodecyl mercaptan to the distillate and titration of the excess with a standard iodine solution. - Replaces the first edition (ISO 3899:1976) and constitutes a minor revision.
|
Withdrawn |
1988-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 3899:2005 |
Rubber — Nitrile latex — Determination of residual acrylonitrile content |
ISO 3899:2005 specifies a method for the determination of the residual acrylonitrile content of nitrile rubber latices which have a residual acrylonitrile content of less than 0,2 % (by mass).
|
Published |
2005-10 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
83.040.10
Latex and raw rubber
|
| ISO 3900:1976 |
Rubber — Nitrile latex — Determination of bound acrylonitrile content |
|
Withdrawn |
1976-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.040.10
Latex and raw rubber
|