| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 7214:2012 |
Cellular plastics — Polyethylene — Methods of test |
ISO 7214:2012 specifies methods for testing flexible and semi-rigid cellular plastics made from polyethylene. Cellular plastics containing copolymers of ethylene or blends of polymers with polyethylene may also be tested by the procedures of this International Standard provided these materials have characteristics similar to polyethylene as described in ISO 1872-1, or copolymers of ethylene as described in ISO 4613-1.
Mandatory tests suitable for characterization of cellular polyethylene, regardless of end use, and optional tests for the determination of properties that are relevant to certain uses are described.
|
Published |
2012-04 |
Edition : 4 |
Number of pages : 11 |
Technical Committee |
83.100
Cellular materials
|
| ISO 7231:1984 |
Polymeric materials, cellular flexible — Method of assessment of air flow value at constant pressure-drop |
The air flow value may be used to give an indication of the effects of formulation and production variables on the cellular structure. Describes the method with an apparatus either for negative or for positive pressure. Two figures show the test arrangement.
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 7231:2010 |
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop |
ISO 7231:2010 specifies two methods for determining the air flow value of flexible cellular polymeric materials.
method A, for conventional types of flexible cellular polymeric material;
method B, for all types of flexible cellular polymeric material, but especially for materials with a low permeability to air.
|
Published |
2010-07 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
83.100
Cellular materials
|
| ISO/FDIS 7231 |
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
83.100
Cellular materials
|
| ISO 7616:1986 |
Cellular plastics, rigid — Determination of compressive creep under specified load and temperature conditions |
Specifies a method for the determination of compressive creep of rigid cellular plastics under specified conditions of load, temperature and time. Test specimes in form or rectangular parallelepipeds are placed between two flat plates and the specified load is applied a) at standard conditions and b) at agreed conditions of temperture and time. The difference in compressive deformation of the loaded specimen at standard atmospheric conditions and at elevated temperature shall be calculated.
|
Published |
1986-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 7850:1986 |
Cellular plastics, rigid — Determination of compressive creep |
Specifies a method for the determination of compressive creep of rigid cellular plastics under specified conditions of load, temperature, relative humidity and time. Test specimes in form or rectangular parallelepipeds are placed between two flat plates and the specified load is applied as follows: procedure A) at standard conditions and procedure B) at agreed conditions of temperture and time. The difference in compressive deformation of the loaded specimen at standard atmospheric conditions and at elevated temperature after specified time shall be calculated.
|
Published |
1986-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8067:1989 |
Flexible cellular polymeric materials — Determination of tear strength |
Specifies a method for the determination of the tear strength of flexibility cellular polymeric materials having a thickness of more than 24.0 mm. The procedure described produces a value which may be regarded as a measure of the tear resistance of foam under the conditions of this particular test.
|
Withdrawn |
1989-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8067:2008 |
Flexible cellular polymeric materials — Determination of tear strength |
ISO 8067:2008 specifies two methods for the determination of the tear strength of flexible cellular polymeric materials:
method A, using a trouser test piece;
method B, using an angle test piece without a nick.
|
Withdrawn |
2008-12 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8067:2018 |
Flexible cellular polymeric materials — Determination of tear strength |
This document specifies two methods for the determination of the tear strength of flexible cellular polymeric materials:
— method A, using a trouser test piece;
— method B, using an angle test piece without a nick.
|
Published |
2018-07 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8307:1990 |
Flexible cellular polymeric materials — Determination of resilience |
The principle consists in dropping a steel ball on to a test specimen from a specified height and measuring the height of rebound. The diagrammatic arrangement for the test apparatus is shown in a figure. The material to be tested shall be conditioned at specified temperature and humidity.
|
Withdrawn |
1990-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8307:2007 |
Flexible cellular polymeric materials — Determination of resilience by ball rebound |
ISO 8307:2007 specifies a test method for determining the resilience by ball rebound of flexible cellular polymeric materials.
|
Withdrawn |
2007-12 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8873-1:2006 |
Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 1: Material specifications |
ISO 8873-1:2006 specifies minimum requirements and test methods for spray-applied polyurethane rigid cellular plastic, used as a thermal insulation for both building, whether applied on a building site or in a prefabrication (manufacturing) facility, and non-building applications. The material is also known as in-situ thermal insulation.
The spray-applied polyurethane rigid cellular plastic thermal insulation is not to be used when the continuous service temperature of the substrate is outside the range of -60 °C to +80 °C.
The test methods used to determine the material properties provide a means of comparing different cellular plastic thermal insulations. They are intended for use in specifications, product evaluations and quality control. They are not intended to predict end-use product performance.
|
Published |
2006-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8873-2:2007 |
Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 2: Application |
ISO 8873-2:2007 outlines requirements for the application of rigid cellular plastic spray polyurethane foam for thermal insulation. The primary application of the material is for use as thermal insulation. Spray polyurethane foam can also be used as the air barrier material which forms part of an air barrier assembly in buildings. Under specific application conditions, the material can be used in vapour barrier applications in a building assembly (details of the conditions can be obtained from the manufacturer). The application requirements are for the installation of spray polyurethane foam whether applied on a building site or in a prefabrication (manufacturing) facility.
ISO 8873-2:2007 can be used for non-building applications when agreed to by the supplier and the purchaser.
The requirements include obligations for the manufacturer, the contractor and the installer. The requirements include the selection of chemical components, application requirements, quality control and documentation of the application, limitations for the application and requirements for safety and for disposal of associated waste material and packaging.
|
Published |
2007-05 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8873-3:2007 |
Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 3: Test methods |
ISO 8873-3:2007 specifies the test procedures that are to be used when testing spray-applied polyurethane foam materials to verify that they meet the requirements given in ISO 8873-1:2006.
|
Published |
2007-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8873:1987 |
Cellular plastics, rigid — Spray-applied polyurethane foam for thermal insulation of buildings — Specification |
Specifies the rquirements and test methods for spray- applied rigid polyurethane cellular plastics used as thermal insulation in two loadbearing categories. The foam may be either produce on site or in a manufactoring facility. The test samples shall be representative of the in place finshed material and of sufficient quantity and size to allow the tests specified to be carried out. The property requirements of RC/PUR- SA for thermal insulation of buildings are listed in a table.
|
Withdrawn |
1987-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.100
Cellular materials
|
| ISO 9054:1990 |
Cellular plastics, rigid — Test methods for self-skinned, high-density materials |
Contains the basic test procedures for the determination of the physical properties of these plastics. Also specifies the primary methods to be used for comparison of materials similar to materials as defined in clause 3. Likewise permits the use of the same test methods, when found to be suitable for the assessment of the properties of products of different thickness, when agreed upon by the supplier and the purchaser.
|
Published |
1990-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.100
Cellular materials
|
| ISO 9772:1994 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame |
|
Withdrawn |
1994-07 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
83.100
Cellular materials
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9772:2001 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame |
|
Withdrawn |
2001-04 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
83.100
Cellular materials
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9772:2001/Amd 1:2003 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1: Specimens |
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 13362:2000 |
Flexible cellular polymeric materials — Determination of compression set under humid conditions |
This International Standard specifies a method for determining the compression set of flexible cellular materials
under humid conditions.
This method consists of maintaining the test piece under specified conditions of time, temperature, humidity and
constant compressive strain and determining the effect on the thickness of the test piece after a specified recovery
period.
|
Published |
2000-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 9772:2012 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame |
ISO 9772:2012 specifies a small-scale laboratory screening procedure for comparing the relative burning characteristics of horizontally oriented, small cellular plastic specimens, having a density less than 250 kg/m3, when exposed to an ignition source.
This method of test is intended for quality assurance and limited product evaluation of cellular plastic materials under controlled laboratory conditions, and is not intended to assess the fire behaviour of e.g. building materials or furnishings under actual fire conditions.
An optional classification system is described in an annex. It is intended for the pre-selection of cellular plastic materials for products, including the determination of the ranges of material parameters that give the same classification.
|
Withdrawn |
2012-09 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
83.100
Cellular materials
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9772:2020 |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame |
This document specifies a small-scale laboratory screening procedure for comparing the relative burning characteristics of horizontally oriented, small cellular plastic specimens having a density less than 250 kg⋅m−3 determined in accordance with ISO 845, when exposed to a small-flame ignition source.
NOTE Another International Standard which covers flexible cellular plastic and cellular rubber is ISO 3582[2].
This method of test is intended for quality assurance and limited product evaluation of cellular plastic materials under controlled laboratory conditions, and is not intended to assess the fire behaviour of, for example, building materials or furnishings under actual fire conditions.
The optional classification system described in Annex A is intended for the pre-selection of cellular plastic materials for products, including the determination of the ranges of material parameters that give the same classification (see 6.1).
|
Published |
2020-11 |
Edition : 4 |
Number of pages : 16 |
Technical Committee |
83.100
Cellular materials
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9774:2004 |
Thermal insulation for building applications — Guidelines for selecting properties |
ISO 9774:2004 gives guidelines to the standards writer in selecting thermal-insulation material properties for standards used in building applications.
These guidelines are not intended to prove the suitability of any particular product for any given application.
The standard applies only to prefabricated thermal-insulation products, i.e. manufactured mats and boards including any facings or coverings which may be present, although the basic characteristics may also be applied to other insulation products, e.g. in situ in systems or components, where appropriate.
The standard covers only thermal-insulation products for use in buildings within normal climatic conditions. It does not cover insulation products for building services, e.g. plumbing and heating, nor insulation products for industrial use.
Acoustic properties are not included in the properties given in the standard, although these may be additionally required for some fields of application.
|
Published |
2004-10 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
83.100
Cellular materials
;
91.100.60
Thermal and sound insulating materials
|
| ISO/TR 9774:1990 |
Thermal-insulation materials — Application categories and basic requirements — Guidelines for the harmonization of International Standards and other specifications |
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
;
91.100.60
Thermal and sound insulating materials
|
| ISO/TR 9774:1990/Cor 1:1991 |
Thermal-insulation materials — Application categories and basic requirements — Guidelines for the harmonization of International Standards and other specifications — Technical Corrigendum 1 |
Table 3: in the "Performance characteristics" column, line f, right-hand side, replace "between 20°C" by "between 20°C and 60°C".
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
|
| ISO 10066:1991 |
Flexible cellular polymeric materials — Determination of creep in compression |
Contains a procedure intended primarily for quality assurance in packaging applications. Describes the principle, the apparatus, the preparation of specimens, conditioning methods, the test procedure, and the contents of the test report.
|
Published |
1991-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 11752:2000 |
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts |
This International Standard specifies a method of determining the hardness or compressibility of a material by
measuring the compression and/or deformation force on flexible cellular polymeric profiles not less than 3 mm
thick.
|
Published |
2000-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 11752:2000/Amd 1:2006 |
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts — Amendment 1 |
|
Published |
2006-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1268-4:2005/Amd 1:2010 |
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs — Amendment 1 |
|
Published |
2010-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 20392:2007 |
Thermal-insulating materials — Determination of compressive creep |
ISO 20392:2007 specifies equipment and procedures for determining the compressive creep of test specimens under various conditions of stress. It is applicable to thermal-insulation products.
|
Published |
2007-06 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
83.100
Cellular materials
|
| ISO 20393:2007 |
Thermal-insulating materials — Determination of long-term water absorption by diffusion |
ISO 20393:2007 specifies equipment and procedures for determining the long-term water absorption of test specimens by diffusion. It is intended for use with thermal-insulation products. It is designed to simulate the absorption of water by products subjected for a long period of time not only to high relative humidity, approximating to 100 %, on both sides but also to a water vapour pressure gradient, as experienced by e.g. inverted roof or unprotected ground insulation.
The test is not applicable to all types of thermal-insulation product. The product standard should normally state whether this test is applicable to a particular product.
|
Published |
2007-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.100
Cellular materials
|
| ISO 20394:2007 |
Thermal-insulating materials — Determination of freeze-thaw resistance |
ISO 20394:2007 specifies the equipment and procedures for determining the effect, on the mechanical properties and moisture content of a product, of the successive cycling of the product from dry conditions at -20 °C to wet conditions (water) at +20 °C. It is applicable to thermal-insulation products.
The method is intended to simulate freeze-thaw effects on thermal-insulation products which are frequently exposed to water and low-temperature conditions, e.g. inverted roofs and unprotected ground insulation.
This test method is not recommended for all thermal-insulation products. It will normally be clear from the product standard, if this International Standard is applicable to a particular product.
|
Published |
2007-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 21844:2018 |
Cellular plastic — Cellulose foam thermal insulation — Material specification |
ISO 21844:2018 specifies material requirements and identifies the test methods to be used to determine these requirements for cellulose foam for thermal insulation for buildings and other applications.
There are four categories of material characterized by the density of the material.
|
Published |
2018-04 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 23641:2021 |
Flexible cellular polymeric materials — Determination of antibacterial effectiveness |
This document specifies a method of determining the antibacterial effectiveness of open-cell flexible cellular polymeric antibacterial treated materials, including their intermediate and final products.
This document is suitable for flexible cellular polymeric materials because the test procedure enables the test inoculum to efficiently contact with the surface of open cell in the flexible cellular polymeric materials.
|
Published |
2021-08 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
83.100
Cellular materials
|
| ISO 24999:2008 |
Flexible cellular polymeric materials — Determination of fatigue by a constant-strain procedure |
ISO 24999:2008 specifies a method for determining the loss in thickness of flexible cellular materials when compressed repetitively to a fixed level of strain. It is particularly useful for quality control in the manufacture of flexible polymeric cellular materials.
Another procedure already exists as ISO 3385: this measures the fatigue characteristics of flexible polymeric cellular materials by constant-stress loading of the specimen rather than constant strain. It forms the basis of a material classification system in ISO 5999.
These two fatigue procedures are complementary to each other and can both be useful in the prediction of end-use performance.
The procedure and equipment used in this International Standard allow testing of a large number of test pieces at any one time, whereas ISO 3385 only allows testing of one test piece at a time under the compression device.
|
Published |
2008-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 75-3:1993 |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
The principle of the method specified is subjecting a standard test specimen to a bending stress equal to 1/10 of a specified or measured flexural strength, raising the temperature at a uniform rate, measuring the temperature, at which a specified deflection occurs. The test load used is not a fixed load as in part 2, but a function of the ultimate or specified load. This allows the method to be applied to materials with a wide range of strength and bending moduli.
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
;
83.080.10
Thermosetting materials
|
| ISO 75-3:2004 |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
ISO 75-3:2004 specifies a method for the determination of the temperature of deflection under load of high-strength thermosetting laminates and compression-moulded long-fibre-reinforced plastics in which the fibre length is greater than 7,5 mm. The flexural stress used is not fixed, as in ISO 75-2, but is a fraction (1/1000) of the initial (room-temperature) flexural modulus of the material under test. This allows the method to be applied to materials with a wide range of flexural moduli.
|
Published |
2004-05 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
83.120
Reinforced plastics
;
83.080.10
Thermosetting materials
|
| ISO/CD 75-3 |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
ISO 75-3:2004 specifies a method for the determination of the temperature of deflection under load of high-strength thermosetting laminates and compression-moulded long-fibre-reinforced plastics in which the fibre length is greater than 7,5 mm. The flexural stress used is not fixed, as in ISO 75-2, but is a fraction (1/1000) of the initial (room-temperature) flexural modulus of the material under test. This allows the method to be applied to materials with a wide range of flexural moduli.
|
Under development |
|
Edition : 3 |
|
Technical Committee |
83.120
Reinforced plastics
;
83.080.10
Thermosetting materials
|
| ISO 527-4:1997 |
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
|
Withdrawn |
1997-04 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 527-4:2021 |
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
This document specifies the test conditions for the determination of the tensile properties of isotropic and orthotropic fibre-reinforced plastic composites, based upon the general principles given in ISO 527-1.
NOTE 1 Unidirectional reinforced materials are covered by ISO 527-5.
The methods are used to investigate the tensile behaviour of the test specimens and for determining the tensile strength, tensile modulus, Poisson's ratios and other aspects of the tensile stress-strain relationship under the defined conditions.
The test method is suitable for use with the following materials:
— fibre-reinforced thermosetting and thermoplastic composites incorporating non-unidirectional reinforcements such as mats, woven fabrics, woven rovings, chopped strands, combinations of such reinforcements, hybrids, rovings, short or milled fibres or preimpregnated materials (prepregs);
NOTE 2 Injection moulded specimens are covered by ISO 527-2.
— combinations of the above with unidirectional reinforcements and multidirectional reinforced materials constructed from unidirectional layers, provided such laminates are symmetrical;
NOTE 3 Materials with completely or mainly unidirectional reinforcements are covered by ISO 527-5.
— finished products made from materials mentioned above.
The reinforcement fibres covered include glass fibres, carbon fibres, aramid fibres and other similar fibres.
|
Withdrawn |
2021-12 |
Edition : 2 |
Number of pages : 27 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 527-4:2023 |
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
This document specifies the test conditions for the determination of the tensile properties of isotropic and orthotropic fibre-reinforced plastic composites, based upon the general principles given in ISO 527-1.
NOTE 1 Unidirectional reinforced materials are covered by ISO 527-5.
The methods are used to investigate the tensile behaviour of the test specimens and for determining the tensile strength, tensile modulus, Poisson's ratios and other aspects of the tensile stress-strain relationship under the defined conditions.
The test method is suitable for use with the following materials:
— fibre-reinforced thermosetting and thermoplastic composites incorporating non-unidirectional reinforcements such as mats, woven fabrics, woven rovings, chopped strands, combinations of such reinforcements, hybrids, rovings, short or milled fibres or preimpregnated materials (prepregs);
NOTE 2 Injection moulded specimens are covered by ISO 527-2.
— combinations of the above with unidirectional reinforcements and multidirectional reinforced materials constructed from unidirectional layers, provided such laminates are symmetrical;
NOTE 3 Materials with completely or mainly unidirectional reinforcements are covered by ISO 527-5.
— finished products made from materials mentioned above.
The reinforcement fibres covered include glass fibres, carbon fibres, aramid fibres and other similar fibres.
|
Published |
2023-03 |
Edition : 3 |
Number of pages : 28 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 527-5:1997 |
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
|
Withdrawn |
1997-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 527-5:2009 |
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
ISO 527-5:2009 specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in ISO 527-1.
The test method is suitable for all polymer matrix systems reinforced with unidirectional fibres and which meet the requirements, including failure mode, set out in ISO 527-5.
The method is suitable for composites with either thermoplastic or thermosetting matrices, including preimpregnated materials (prepregs). The reinforcements covered include carbon fibres, glass fibres, aramid fibres and other similar fibres. The reinforcement geometries covered include unidirectional (i.e. completely aligned) fibres and rovings and unidirectional fabrics and tapes.
The method is not normally suitable for multidirectional materials composed of several unidirectional layers at different angles (see ISO 527‑4).
|
Withdrawn |
2009-07 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-5:2001 |
Fibre-reinforced plastics — Methods of producing test plates — Part 5: Filament winding |
|
Published |
2001-06 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 6587:1980 |
Paper, board and pulps — Determination of conductivity of aqueous extracts |
|
Withdrawn |
1980-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
85.040
Pulps
;
85.060
Paper and board
|
| ISO 527-5:2021 |
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
This document specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in ISO 527-1.
NOTE Isotropic and orthotropic reinforced materials are covered by ISO 527-4.
The methods are used to investigate the tensile behaviour of the test specimens and for determining the tensile strength, tensile modulus, Poisson's ratios and other aspects of the tensile stress-strain relationship under the conditions defined.
The test method is suitable for all polymer matrix systems reinforced with unidirectional fibres and which meet the requirements, including failure mode, set out in this document.
The method is suitable for composites with either thermoplastic or thermosetting matrices, including preimpregnated materials (prepregs). The reinforcements covered include carbon fibres, glass fibres, aramid fibres and other similar fibres. The reinforcement geometries covered include unidirectional (i.e. completely aligned) fibres and rovings and unidirectional fabrics and tapes.
The method is not normally suitable for multidirectional materials composed of several unidirectional layers at different angles (see ISO 527-4).
|
Published |
2021-11 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1172:1975 |
Textile glass reinforced plastics — Determination of loss on ignition |
|
Withdrawn |
1975-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 1172:1996 |
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
Gives two calcination methods for the determination of the textile-glass and mineral-filler content of glass-reinforced plastics. Method A is used for the determination of the textile-glass content when no mineral fillers are present; method B is used when both components are present. Replaces the first edition.
|
Published |
1996-12 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO/DIS 1172 |
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
Gives two calcination methods for the determination of the textile-glass and mineral-filler content of glass-reinforced plastics. Method A is used for the determination of the textile-glass content when no mineral fillers are present; method B is used when both components are present. Replaces the first edition.
|
Under development |
|
Edition : 3 |
Number of pages : 8 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-1:2001 |
Fibre-reinforced plastics — Methods of producing test plates — Part 1: General conditions |
The various parts of ISO 1268 (see the foreword) describe methods used to prepare reinforced-plastics plates from
which test specimens can be cut. This allows the properties of a composite, or the constituents of the composite, to
be determined. The methods are intended to cover all the main types of reinforcement and resin matrix.
The choice of test plate preparation method depends on:
a) the reinforcement:
its nature (glass, carbon, aramid, etc.);
its form (roving, mat, woven fabric, etc.);
its orientation with respect to the length, width and thickness of the plate;
its content in the reinforced plastic;
b) the matrix (thermosetting or thermoplastic);
c) the magnitude expected for the properties;
d) the production process that is to be evaluated.
Since the mechanical properties of a reinforced plastic are known to be dependent on the process by which the
plastic is produced, it is recommended that the test plates be prepared, if possible, by the same method that will be
used to produce the plastic.
This part of ISO 1268 describes the general requirements common to all the methods.
|
Published |
2001-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-2:2001 |
Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding |
|
Published |
2001-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-3:2000 |
Fibre-reinforced plastics — Methods of producing test plates — Part 3: Wet compression moulding |
|
Published |
2000-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-4:2005 |
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs |
ISO 1268-4:2005 describes the preparation of test plates from layers of preimpregnated unidirectional fibre or fabric (prepregs) under pressure and temperature in various types of equipment (for example, autoclave, bladder press, hydraulic press or vacuum bag equipment). It applies to all reinforcements and resins.
This method is applicable to reinforcements preimpregnated either with a partially cured thermosetting resin or with a thermoplastic resin. The test plate is formed by stacking layers of the preimpregnated material in the required sequence and orientation, followed by compaction and final consolidation under pressure/vacuum at a temperature above ambient. The prepared test plates are subsequently machined into the required test specimens.
Standard plates prepared in this manner may be used either for evaluating the components, i.e. the reinforcement, finish, resin, etc., or for verifying the overall quality of the finished product.
|
Published |
2005-03 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO/PRF 4410 |
Experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-6:2002 |
Fibre-reinforced plastics — Methods of producing test plates — Part 6: Pultrusion moulding |
This part of ISO 1268 specifies a pultrusion-moulding method for preparing reinforced plastics test plates to be used
for the preparation of test specimens to determine the mechanical and physical properties of the laminate.
The method is applicable to laminates made from thermosetting or thermoplastic resins reinforced with glass, carbon
or aramid fibres alone or in combination and in any form suitable for the pultrusion process (continuous rovings, tows,
mats, fabrics or combinations of these).
This part of ISO 1268 is intended to be read in conjunction with ISO 1268-1.
|
Published |
2002-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-7:2001 |
Fibre-reinforced plastics — Methods of producing test plates — Part 7: Resin transfer moulding |
|
Published |
2001-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-8:2004 |
Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC |
ISO 1268-8:2004 specifies the general principles and procedures for the compression moulding of test plates from two types of fibre-reinforced thermosetting moulding compound: sheet moulding compound (SMC) and bulk moulding compound (BMC). Two different methods are given for preparing the mould charge: method A for moulding without the material flowing in the mould and method B for moulding so that the material flows in the mould.
|
Published |
2004-05 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-9:2003 |
Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC |
ISO 1268-9:2003 specifies a method for preparing test plates by compression moulding of reinforced thermoplastic sheet (GMT/STC) to be used for the preparation of test specimens to determine the mechanical and physical properties of the laminate. The proposed method is applicable to laminates made from a thermoplastic matrix reinforced with glass, carbon, aramid or other reinforcing fibres, alone or in combination and in any form suitable for compression moulding.
|
Published |
2003-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-10:2005 |
Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens |
ISO 1268-10:2005 specifies the general principles to be followed while injection moulding test specimens of bulk moulding compound (BMC) and gives details of mould designs for preparing one type of specimen for use in establishing reproducible moulding conditions. Where appropriate, this part of ISO 1268 may be applied to sheet moulding compound (SMC) formulated for injection moulding. Its purpose is to promote uniformity in describing the main parameters of the moulding process and also to establish uniform practice in reporting moulding conditions. The particular conditions required for the reproducible preparation of test specimens which will give comparable results will vary for each material used. These conditions are given in the International Standard for the relevant material or are to be agreed upon between interested parties.
|
Published |
2005-02 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268-11:2005 |
Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates |
ISO 1268-11:2005 specifies two two-cavity moulds, designated the type D1 and type D2 ISO moulds, for the injection moulding of small plates measuring 60 mm by 60 mm with preferred thicknesses of 2 mm (type D1) or 4 mm (type D2) which can be used for a variety of tests. The moulds may additionally be fitted with inserts for studying the effects of weld lines on the mechanical properties.
|
Published |
2005-02 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 1268:1974 |
Plastics — Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes |
Specification of standard procedures for the preparation of test plates for subsequent preparation of test specimens by bonding glass cloth or mats with low pressure thermosetting resins. Three methods are specified: Method A: Glass reinforcement and liquid resin with suitable catalyst or curing agent are moulded in a press mould under appropriate conditions. Method B: Glass reinforced prepregs are moulded in a press at a mould temperature higher than room temperature. Method C: The glass reinforcement is manually laminated with simultaneous impregnation with a resin containing a suitable catalyst or curing agent.
|
Withdrawn |
1974-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 3268:1978 |
Plastics — Glass reinforced materials — Determination of tensile properties |
|
Withdrawn |
1978-05 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 3597-1:1993 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods |
Provides general information and specifies a method for preparing specimens (rods) intended to be used for tests specified in the other parts of ISO 3597. The preparation of rods includes the manufacture and division of rods into specimens of given length and their treatment in boiling water, if required.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.120
Reinforced plastics
;
59.100.10
Textile glass materials
|
| ISO 3597-1:2003 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods |
ISO 3597-1:2003 provides general information and specifies a method for preparing specimens (rods) intended to be used for tests specified in the other parts of ISO 3597.
|
Published |
2003-10 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.120
Reinforced plastics
;
59.100.10
Textile glass materials
|
| ISO 3597-2:1993 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength |
Specifies a test method for determining the flexural strength of composite rods of circular cross-section made of roving-reinforced resin. It may be carried out on as-made rods or on rods that have been pretreated by immersion in boiling water for a specified time and is intended for inspection and quality control of rovings. The results obtained are not intended for the generation of design data.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
;
59.100.10
Textile glass materials
|
| ISO 3597-2:2003 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength |
ISO 3597-2:2003 specifies a method for determining the flexural strength of composite rods of circular cross-section made of roving-reinforced resin. The test may be carried out on "as-moulded" rods, or on rods that have been pretreated by immersion in boiling water (or another medium) for a specified time. The test is intended for inspection and quality control of rovings or for evaluating their suitability for use in a resin system. The results obtained are not intended for the generation of design data.
|
Published |
2003-10 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
;
59.100.10
Textile glass materials
|
| ISO 3597-3:1993 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength |
Specifies a test method for determining the compressive strength of composite rods of circular cross-section made of roving-reinforced resin. It may be carried out on as-made rods or on rods that have been pretreated by immersion in boiling water for a specified time and is intended for inspection and quality control of rovings. The results obtained are not intended for the generation of design data.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.120
Reinforced plastics
;
59.100.10
Textile glass materials
|
| ISO 3597-3:2003 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength |
ISO 3597-3:2003 specifies a method for determining the compressive strength of composite rods of circular cross-section made of roving-reinforced resin. The test may be carried out on "as-moulded" rods, or on rods that have been pretreated by immersion in boiling water (or another medium) for a specified time. The test is intended for inspection and quality control of rovings or for evaluating their suitability for use in a resin system. The results obtained are not intended for the generation of design data.
|
Published |
2003-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.120
Reinforced plastics
;
59.100.10
Textile glass materials
|
| ISO 3597-4:1993 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength |
Specifies a test method for determining the apparent interlaminar shear strength of composite rods of circular cross-section made of roving-reinforced resin. It may be carried out on as-made rods or on rods that have been pretreated by immersion in boiling water for a specified time and is intended for inspection and quality control of rovings. The results obtained are not intended for the generation of design data.
|
Withdrawn |
1993-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
;
59.100.10
Textile glass materials
|
| ISO 3597-4:2003 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength |
ISO 3597-4:2003 specifies a method for determining the apparent interlaminar shear strength of composite rods of circular cross-section made of roving-reinforced resin. The test may be carried out on "as-moulded" rods, or on rods that have been pretreated by immersion in boiling water (or another medium) for a specified time. The test is intended for inspection and quality control of rovings or for evaluating their suitability for use in a resin system. The results obtained are not intended for the generation of design data.
|
Published |
2003-10 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
;
59.100.10
Textile glass materials
|
| ISO 3597:1977 |
Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of flexural (cross-breaking) strength |
|
Withdrawn |
1977-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 4899:1993 |
Textile-glass-reinforced thermosetting plastics — Properties and test methods |
Establishes a list of properties and the corresponding test methods that permit inspection control of thermosetting plastics reinforced with textile glass.
|
Published |
1993-12 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 4901:1985 |
Reinforced plastics based on unsaturated polyester resins — Determination of residual styrene monomer content |
The residual styrene monomer content in reinforced plastics based on unsaturated polyester (UP) resins is an important criterion in evaluating the degree of cure of UP resins in the polymerized state. The determination is carried out by extraction of the residual monomer styrene from the UP resin in the polymerized state using dichloromethane and subsequent gaschromatographic analysis of the extract with n-butyl-benzene as internal standard. An alternative method of determining the residual styrene monomer by the Wijs method is also specified.
|
Withdrawn |
1985-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 4901:2011 |
Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
ISO 4901:2011 specifies a method for the determination, by gas chromatography, of the residual styrene monomer in reinforced plastics based on unsaturated polyester (UP) resins in the polymerized state. The residual styrene monomer content is an important criterion in evaluating the degree of cure of UP resins in the polymerized state. The method can also be used for the simultaneous determination of other volatile aromatic hydrocarbons in UP resins.
The method is not applicable to UP resins of high chemical resistance.
|
Published |
2011-08 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 7822:1990 |
Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods |
|
Published |
1990-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO/DIS 8057 |
Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal — Electrochemical tests in neutral sodium chloride solution |
This International Standard specifies the apparatus, the reagents, and the procedure to be used in conducting the electrochemical tests for assessment of the galvanic corrosion rates of assembled structures between CFRPs and protection-coated metallic materials.
|
Under development |
|
Edition : 1 |
Number of pages : 16 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO/DIS 8060 |
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test |
This International Standard specifies a method for determining the durability of the adhesive joints of carbon fibre reinforced plastics (CFRPs) and metal assemblies by a wedge rupture test using a double cantilever beam (DCB) specimen under specified environmental conditions. This method is intended for evaluating the safety and reliability of adhesives, primers, and surface treatments of the adherends.
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO/DIS 8065 |
Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation |
This International Standard specifies a method for mechanoluminescent visualization of position of crack tip and crack propagation for joint evaluation of the bonded plates of carbon fibre reinforced plastics (CFRPs) to metal assemblies, with a standard specimen and under specified conditions of preparation, conditioning and testing. This method is intended for testing only those bonded plates used in bonding carbon fibre reinforced plastics (CFRPs) to metal assemblies.
|
Under development |
|
Edition : 1 |
Number of pages : 21 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 8515:1991 |
Textile-glass-reinforced plastics — Determination of compressive properties in the direction parallel to the plane of lamination |
|
Withdrawn |
1991-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 8604:1988 |
Plastics — Prepregs — Definitions of terms and symbols for designations |
Defines in English and French 36 terms and 25 letter symbols used in the designation, production and use of crosslinkable prepregs. These include the terms concerning raw materials, types of prepreg products, and special grades of prepregs. The symbols, which refer specifically to prepreg products are designating product type, resin type, reinforciment type, reinforcement form and reinforcement orientation.
|
Published |
1988-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.120
Reinforced plastics
;
01.040.83
Rubber and plastics industries (Vocabularies)
|
| ISO 8605:1989 |
Textile glass reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 8605:2001 |
Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
|
Published |
2001-06 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO/DIS 8605 |
Fibre-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
This document establishes a basis for a specification for sheet moulding compound (SMC) used in the production of composite parts by hot moulding.
It is suitable for sheet moulding compound with glass fibre (GF) and carbon fibre (CF) as the sole or main reinforcement.
It should be noted that the term sheet moulding compound covers products which can be complex mixtures and which may differ from the definition of “mat” given in ISO 472.
|
Under development |
|
Edition : 3 |
Number of pages : 10 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 8606:1990 |
Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification |
|
Published |
1990-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 9291:1996 |
Textile-glass-reinforced plastics — Rovings — Preparation of unidirectional plates by winding |
|
Withdrawn |
1996-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 9353:1991 |
Glass-reinforced plastics — Preparation of plates with unidirectional reinforcements by bag moulding |
|
Withdrawn |
1991-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 9782:1993 |
Plastics — Reinforced moulding compounds and prepregs — Determination of apparent volatile-matter content |
The apparent volatile-matter content is the percentage of matter lost on heating, relative to the initial mass, The principle of the method specified is obtaining it by measuring the change in mass of a test specimen when heated in an air-ventilated oven at a specified temperature for a specified length of time. The method is applicable to all unidirectional and multidirectional fibre-reinforced prepregs and all thermosetting-resin matrices. Does not apply to unimpregnated reinforcement fibres.
|
Published |
1993-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 10350-2:2001 |
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics |
|
Withdrawn |
2001-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 10350-2:2011 |
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics |
ISO 10350 identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property is specified by a single experimental value, although in certain cases properties are represented by two values obtained under different test conditions or along different directions in the material. The properties included are those presented conventionally in manufacturers' data sheets. ISO 10350-2:2011 applies to reinforced thermoplastic and thermosetting materials where the reinforcement fibres are either discontinuous with a fibre length prior to processing greater than 7,5 mm or continuous (e.g. fabric, continuous-strand mat or unidirectional). ISO 10350-1 deals specifically with unreinforced and filled plastics, including those using fibres less than 7,5 mm in length.
|
Withdrawn |
2011-03 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 10350-2:2020 |
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics |
ISO 10350 identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property is specified by a single experimental value, although in certain cases properties are represented by two values obtained under different test conditions or along different directions in the material. The properties included are those presented conventionally in manufacturers' data sheets.
This document applies to reinforced thermoplastic and thermosetting materials where the reinforcement fibres are either discontinuous with a fibre length prior to processing greater than 7,5 mm or continuous (e.g. fabric, continuous-strand mat or unidirectional).
ISO 10350-1 deals specifically with unreinforced and filled plastics, including those using fibres less than 7,5 mm in length.
|
Published |
2020-07 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 10352:1991 |
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area |
|
Withdrawn |
1991-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 10352:1997 |
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area |
Describes a method for the determination of the mass per unit area of moulding compounds and preimpregnated sheets, tapes, fabrics and mats (prepregs). Applicable to prepregs irrespective of which reinforcement (aramid, carbon, glass, etc.) or which type of matrix (thermosetting or thermoplastic) is used.
|
Withdrawn |
1997-01 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 12115:1997/Cor 1:1998 |
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life — Technical Corrigendum 1 |
|
Published |
1998-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 10352:2010 |
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area |
ISO 10352:2010 specifies a method for the determination of the mass per unit area of sheet moulding compound and preimpregnated unidirectional sheet, tape, fabric and mats.
Unless stated to the contrary in the relevant material specification, it is applicable to prepregs in which any type of reinforcement (aramid, carbon, glass, etc.) and any type of matrix (thermosetting or thermoplastic) has been used.
|
Withdrawn |
2010-12 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 10352:2020 |
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area |
This document specifies a method for the determination of the mass per unit area. It also specifies five methods (Method A to Method E) for the determination of the fibre mass per unit area of moulding compounds and prepregs. The five methods are as follows:
— Method A: Extraction by Soxhlet;
— Method B: Extraction by immersion in solvent in a beaker;
— Method C: Decomposition by loss ignition;
— Method D: Extraction by wet combustion;
— Method E: Method by calculation.
This document is applicable to the following types of materials:
— moulding compound and preimpregnated unidirectional sheet, tape, fabric and mats;
— prepregs in which any type of reinforcement (aramid, carbon, glass, etc.) and any type of matrix (thermosetting or thermoplastic) has been used.
Typically, reinforcement fibres are coated with sizing or finishes. These normally dissolve with the resin and are, therefore, included in the resin content.
This document is not applicable to the following types of prepregs:
— those containing reinforcements which are soluble (or partly soluble) in the solvents used to dissolve the resin.
|
Published |
2020-08 |
Edition : 4 |
Number of pages : 15 |
Technical Committee |
83.120
Reinforced plastics
|
| ISO 10406-1:2008 |
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids |
ISO 10406-1:2008 specifies test methods applicable to fibre-reinforced polymer (FRP) bars and grids as reinforcements or pre-stressing tendons in concrete.
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
83.120
Reinforced plastics
;
91.100.30
Concrete and concrete products
|
| ISO 10406-1:2015 |
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids |
ISO 10406-1:2014 specifies test methods applicable to fibre-reinforced polymer (FRP) bars and grids as reinforcements or pre-stressing tendons in concrete.
|
Published |
2015-01 |
Edition : 2 |
Number of pages : 39 |
Technical Committee |
83.120
Reinforced plastics
;
91.100.30
Concrete and concrete products
|
| ISO 10406-2:2008 |
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets |
ISO 10406-2:2008 specifies test methods applicable to fibre-reinforced polymer (FRP) sheets for the upgrading of concrete members.
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
83.120
Reinforced plastics
;
91.100.30
Concrete and concrete products
|
| ISO 10406-2:2015 |
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets |
ISO 10406-2:2015 specifies test methods applicable to fibre-reinforced polymer (FRP) sheets for the upgrading of concrete members.
|
Published |
2015-01 |
Edition : 2 |
Number of pages : 35 |
Technical Committee |
83.120
Reinforced plastics
;
91.100.30
Concrete and concrete products
|
| ISO 10406-3:2019 |
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 3: CFRP strips |
This document specifies test methods applicable to unidirectional carbon fibre-reinforced polymer (CFRP) strips as external-bonded reinforcements on the concrete substrate.
This document is applicable for the CFRP strips that:
— consist of carbon fibre and thermoset resin;
— are manufactured by pultrusion method;
— have a higher carbon fibre fraction such as over 60 %; and
— have a thickness within 3 mm.
Also, the test pieces for determining tensile properties are cut down from CFRP strips along the CFRP strips axis, and have bonded anchorage block at the both ends.
|
Published |
2019-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
83.120
Reinforced plastics
;
91.100.30
Concrete and concrete products
|