| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 9352:1989 |
Plastics — Determination of resistance to wear by abrasive wheels |
|
Withdrawn |
1989-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.080
Plastics
|
| ISO 844:1978 |
Cellular plastics — Compression test of rigid materials |
|
Withdrawn |
1978-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 844:1998 |
Cellular plastics — Compression test for rigid materials — Specification |
|
Withdrawn |
1998-05 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 844:2001 |
Rigid cellular plastics — Determination of compression properties |
|
Withdrawn |
2001-06 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
83.100
Cellular materials
|
| ISO 844:2004 |
Rigid cellular plastics — Determination of compression properties |
ISO 844:2004 specifies a method of determining
a) the compressive strength and corresponding relative deformation
or
b) the compressive stress at 10 % relative deformation
and
c) when desired, the compressive modulus
of rigid cellular plastics.
|
Withdrawn |
2004-06 |
Edition : 4 |
Number of pages : 8 |
Technical Committee |
83.100
Cellular materials
|
| ISO 844:2007 |
Rigid cellular plastics — Determination of compression properties |
ISO 844:2007 specifies a method of determining
a) the compressive strength and corresponding relative deformation
or
b) the compressive stress at 10 % relative deformation
and
c) when desired, the compressive modulus
of rigid cellular plastics.
|
Withdrawn |
2007-04 |
Edition : 5 |
Number of pages : 8 |
Technical Committee |
83.100
Cellular materials
|
| ISO 844:2014 |
Rigid cellular plastics — Determination of compression properties |
ISO 844:2014 specifies a method of determining a) the compressive strength and corresponding relative deformation, or b) the compressive stress at 10 % relative deformation, and c) when desired, the compressive modulus of rigid cellular plastics.
There are two procedures:
- Procedure A employs crosshead motion for determination of compressive properties. Procedure A is intended to be used when compressive stress at 10 % relative deformation has to be determined.
- Procedure B employs strain measuring devices mounted on the specimen (contact extensometer) or similar device which measures directly sample deformation. Procedure B is intended to be used when compressive modulus has to be determined.
|
Withdrawn |
2014-08 |
Edition : 6 |
Number of pages : 10 |
Technical Committee |
83.100
Cellular materials
|
| ISO 844:2021 |
Rigid cellular plastics — Determination of compression properties |
This document specifies methods for determining the compressive strength and corresponding relative deformation, the compressive stress at 10 % relative deformation, and the compressive modulus of rigid cellular plastics.
|
Published |
2021-03 |
Edition : 7 |
Number of pages : 15 |
Technical Committee |
83.100
Cellular materials
|
| ISO 845:1977 |
Cellular rubbers and plastics — Determination of apparent density |
|
Withdrawn |
1977-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 845:1988 |
Cellular plastics and rubbers — Determination of apparent (bulk) density |
Specification of a method for determining the apparent density or the bulk density of rigid, semi-rigid or flexible cellular plastics and rubbers. If the material to be tested includes skins formed during moulding, the apparent overall density or the apparent core density may be determined. Each test piece shall be of a shape, that its volume can be easily calculated.
|
Withdrawn |
1988-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 845:2006 |
Cellular plastics and rubbers — Determination of apparent density |
ISO 845:2006 specifies a method for determining the apparent overall density and the apparent core density of cellular plastics and rubbers.
If the material to be tested includes skins formed during a moulding/extrusion, the apparent overall density or the apparent core density, or both, can be determined. If the material does not have skins formed during moulding, the term "overall density" is not applicable.
|
Published |
2006-12 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1209-1:1990 |
Cellular plastics, rigid — Flexural tests — Part 1: Bending test |
Specifies a method of test for assessing the behaviour of a bar of rigid cellular plastic under the action of three-point bending. It may be used to determine either the load for a specified deformation or the load at break. The method is not applicable to brittle cellular plastics and is limited to materials of 20 mm thickness or greater. A load is applied at a uniform rate by means of a loading edge to a test specimen supported at two positions. The load is applied perpendicularly in the middle between the two positions. The load at a specified deflection or at break is recorded. Cancels and replaces ISO 1209:1976.
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1209-1:2004 |
Rigid cellular plastics — Determination of flexural properties — Part 1: Basic bending test |
ISO 1209-1:2004 specifies a simple method for assessing the behaviour of a bar of rigid cellular plastic under the action of three-point bending.
It may be used to determine either the load for a specified deformation or the load at break.
The version of the method specified uses small test specimens and does not produce pure bending. Hence it does not permit the calculation of the flexural strength or the apparent flexural modulus (modulus of elasticity). The user is referred to ISO 1209-2 for the determination of these parameters.
The method is not applicable to cellular plastics in which significant crushing is observed. Numerical values should be compared only when determined on materials of similar physical properties and dimensions.
The method is limited to materials of 20 mm thickness or greater.
|
Withdrawn |
2004-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1798:2008 |
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break |
ISO 1798:2008 specifies a method for determining the strength and deformation properties of flexible cellular materials when a test piece is extended at a constant rate until it breaks.
|
Published |
2008-02 |
Edition : 4 |
Number of pages : 11 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1209-1:2007 |
Rigid cellular plastics — Determination of flexural properties — Part 1: Basic bending test |
ISO 1209-1:2007 specifies a simple method for assessing the behaviour of a bar of rigid cellular plastic under the action of three-point bending.
It may be used to determine either the load for a specified deformation or the load at break.
The version of the method specified uses small test specimens and does not produce pure bending. Hence it does not permit the calculation of the flexural strength or the apparent flexural modulus (modulus of elasticity). The user is referred to ISO 1209-2 for the determination of these parameters.
The method is not applicable to cellular plastics in which significant crushing is observed. Numerical values should be compared only when determined on materials of similar physical properties and dimensions.
The method is limited to materials of 20 mm thickness or greater.
|
Published |
2007-05 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1209-2:1990 |
Cellular plastics, rigid — Flexural tests — Part 2: Determination of flexural properties |
Specifies a method of test for determining the flexural strength and the apparent flexural modulus of elasticity of rigid cellular plastics. A load is applied at a uniform rate by means of a cylindrical loading edge to a test specimen supported at two positions. The load is applied perpendicularly to the specimen at a position midway between the supporting positions. The values of the load and the deformation are recorded. The flexural properties are calculated from these values. A universal mechanical-testing machine is used for the test. Cancels and replaces ISO 1209:1976.
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1209-2:2004 |
Rigid cellular plastics — Determination of flexural properties — Part 2: Determination of flexural strength and apparent flexural modulus of elasticity |
ISO 1209-2:2004 specifies a method for determining the flexural strength and the apparent flexural modulus of elasticity of rigid cellular plastics.
|
Withdrawn |
2004-06 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1209-2:2007 |
Rigid cellular plastics — Determination of flexural properties — Part 2: Determination of flexural strength and apparent flexural modulus of elasticity |
ISO 1209-2:2007 specifies a method for determining the flexural strength and the apparent flexural modulus of elasticity of rigid cellular plastics.
|
Published |
2007-05 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1209:1976 |
Rigid cellular plastics — Bending test |
|
Withdrawn |
1976-08 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1663:1981 |
Cellular plastics — Determination of water vapour transmission rate of rigid materials |
|
Withdrawn |
1981-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1663:1999 |
Rigid cellular plastics — Determination of water vapour transmission properties |
|
Withdrawn |
1999-07 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1663:2007 |
Rigid cellular plastics — Determination of water vapour transmission properties |
ISO 1663:2007 specifies a method of determining the water vapour transmission rate, water vapour permeance, water vapour permeability and water vapour diffusion resistance index for rigid cellular plastics.
The scope of this method provides for the testing of rigid cellular materials that have thicknesses from 10 mm upwards and which may, as an integral part of the material, contain natural skins or adhered facings of some different material.
Three different sets of temperature and humidity conditions are provided, as follows:
38 °C and a relative-humidity gradient across the test specimen of 0 % to 88 %;
23 °C and a relative-humidity gradient across the test specimen of 0 % to 85 %;
23 °C and a relative-humidity gradient across the test specimen of 0 % to of 50 %.
The results obtained by this method are suitable for design purposes and production control, and for inclusion in product specifications.
The method is suitable for materials which have water vapour transmission rates in the range 3 ng/(m2.s) to 200 ng/(m2.s).
|
Published |
2007-05 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
83.100
Cellular materials
|
| ISO/DIS 1663 |
Rigid cellular plastics — Determination of water vapour transmission properties |
|
Under development |
|
Edition : 4 |
Number of pages : 15 |
Technical Committee |
83.100
Cellular materials
|
| ISO/R 1794:1971 |
Withdrawal of ISO/R 1794-1971 |
|
Withdrawn |
1971-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1798:1983 |
Polymeric materials, cellular flexible — Determination of tensile strength and elongation at break |
|
Withdrawn |
1983-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1798:1997 |
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break |
|
Withdrawn |
1997-09 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO/R 1855:1975 |
Withdrawal of ISO 1855-1975 |
|
Withdrawn |
1975-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1856:2018 |
Flexible cellular polymeric materials — Determination of compression set |
This document specifies three methods for determining the compression set of flexible cellular materials.
This document applies to latex and polyurethane foams of thickness greater than 2 mm.
|
Published |
2018-06 |
Edition : 4 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1922:1981 |
Cellular plastics — Determination of shear strength of rigid materials |
The method is based on the application of a shear stress to a test specimen of defined shape by means of metal supports bonded to the specimen. The adhesive used to fix the metal supports to the test specimen shall be such that shear strength and modulus of the adhesive film are significantly greater than that of the cellular material under test.
|
Withdrawn |
1981-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1922:2001 |
Rigid cellular plastics — Determination of shear strength |
|
Withdrawn |
2001-07 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1922:2012 |
Rigid cellular plastics — Determination of shear strength |
ISO 1922:2012 specifies a method of determining the shear strength of rigid cellular plastics. It also provides for the optional determination of shear modulus.
|
Withdrawn |
2012-08 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1922:2018 |
Rigid cellular plastics — Determination of shear properties |
This document specifies a procedure of determining the shear strength of rigid cellular plastics. It also provides for the determination of shear modulus and shear strain.
|
Published |
2018-09 |
Edition : 5 |
Number of pages : 10 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1923:1981 |
Cellular plastics and rubbers — Determination of linear dimensions |
Specification of the characteristics and the choice of the measuring equipment and procedure for determination of the linear dimensions of sheets, blocks or test specimens of ceelular material (flexible and rigid). Depending on the range of the dimensions to be measured different measuring instruments are recommended.
|
Published |
1981-09 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1926:1979 |
Cellular plastics — Determination of tensile properties of rigid materials |
Applies primarily to ceelular materials having a sufficient compression resistance to permit suitable gripping of the test pieces. The test piece of a given shape is subjected to a tensile stress, transmitted to the test piece by means of a suitable device. The corresponding stress-strain curve shall be recorded. In the case of low compression resistance the bonding of reinforcing metall plates to the gripping ends of test pieces is possible.
|
Withdrawn |
1979-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1926:2005 |
Rigid cellular plastics — Determination of tensile properties |
ISO 1926:2005 specifies a method of determining the behaviour of rigid cellular plastics materials when they are subjected to a tensile stress.
It applies primarily to cellular materials having a compression resistance sufficient to permit suitable gripping of the test specimens. If it is impossible to grip the test specimen, the method is modified so that the ends of the specimen are reinforced with metal plates.
|
Withdrawn |
2005-07 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 1926:2009 |
Rigid cellular plastics — Determination of tensile properties |
ISO 1926:2009 specifies a method of determining the behaviour of rigid cellular plastics materials when they are subjected to a tensile stress.
It applies primarily to cellular materials having a compression resistance sufficient to permit suitable gripping of the test specimens. If it is impossible to grip the test specimen, the method is modified so that the ends of the specimen are reinforced with metal plates.
|
Published |
2009-12 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2439:1980 |
Polymeric materials, cellular flexible — Determination of hardness (indentation technique) |
|
Withdrawn |
1980-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2439:1997 |
Flexible cellular polymeric materials — Determination of hardness (indentation technique) |
|
Withdrawn |
1997-09 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2439:1997/Cor 1:1998 |
Flexible cellular polymeric materials — Determination of hardness (indentation technique) — Technical Corrigendum 1 |
|
Withdrawn |
1998-06 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
|
| ISO/TR 2799:1978 |
Cellular plastics — Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load |
|
Withdrawn |
1978-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2439:2008 |
Flexible cellular polymeric materials — Determination of hardness (indentation technique) |
The indentation hardness of flexible cellular materials is a measure of their load-bearing properties. ISO 2439:2008 specifies four methods (A to D) for the determination of indentation hardness and one method (E) for determination of compressive deflection coefficient and hysteresis loss rate of flexible cellular materials. Annex A provides a summary of test parameters and typical force-indentation graphs obtained with these methods.
These five methods are applicable only to latex foam, urethane foam and PVC foam of the open-cell type. The methods specified can be used for testing finished articles and for the characterization of bulk material.
ISO 2439:2008 specifies the following methods:
Method A — Determination of the 40 %/30 s indentation hardness index, which gives a single indentation measurement for laboratory test purposes;
Method B — Determination of the 25 %-40 %-65 %/30 s indentation hardness characteristics, which provides information about the shape of the hardness indentation curve;
Method C — Determination of the 40 % indentation hardness check, which is a quick procedure suitable for quality control testing;
Method D — Determination of the 25 %/20 s low indentation hardness index, which is a quick procedure suitable as an inspection test;
Method E — Determination of the compressive deflection coefficient and hysteresis loss rate, which gives additional information about the load-bearing properties of materials.
The results obtained by these methods relate only to the test conditions specified and cannot, in general, be used directly for design purposes.
|
Published |
2008-12 |
Edition : 4 |
Number of pages : 14 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2440:1983 |
Polymeric materials, cellular flexible — Accelerated ageing tests |
|
Withdrawn |
1983-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2440:1997 |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests |
|
Withdrawn |
1997-09 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2440:1997/Amd 1:2010 |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1 |
|
Withdrawn |
2010-02 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2440:1997/Amd 2:2014 |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2 |
|
Withdrawn |
2014-10 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2440:2019 |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests |
This document specifies, for flexible and rigid cellular polymeric materials, laboratory procedures which are intended to imitate the effects of naturally occurring reactions such as oxidation or hydrolysis by humidity. The physical properties of interest are measured before and after the application of the specified treatments.
Test conditions are only given for open cellular latex, both open- and closed-cell polyurethane foams, and closed-cell polyolefin foams. Conditions for other materials will be added as required.
The effect of the ageing procedures on any of the physical properties of the material can be examined, but those normally tested are either the elongation and tensile properties, or the compression or indentation hardness properties.
These tests do not necessarily correlate either with service behaviour or with ageing by exposure to light.
If desired, the ageing conditions contained in this document can be applied to composite structures containing any of the above types of cellular material. This can be helpful in the investigation of possible interactions between cellular materials and other substrates. Composite constructions can be in the form of complete finished products or representative small specimens cut there-from.
|
Published |
2019-10 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
83.100
Cellular materials
|
| ISO/CD 2440 |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests |
This document specifies, for flexible and rigid cellular polymeric materials, laboratory procedures which are intended to imitate the effects of naturally occurring reactions such as oxidation or hydrolysis by humidity. The physical properties of interest are measured before and after the application of the specified treatments.
Test conditions are only given for open cellular latex, both open- and closed-cell polyurethane foams, and closed-cell polyolefin foams. Conditions for other materials will be added as required.
The effect of the ageing procedures on any of the physical properties of the material can be examined, but those normally tested are either the elongation and tensile properties, or the compression or indentation hardness properties.
These tests do not necessarily correlate either with service behaviour or with ageing by exposure to light.
If desired, the ageing conditions contained in this document can be applied to composite structures containing any of the above types of cellular material. This can be helpful in the investigation of possible interactions between cellular materials and other substrates. Composite constructions can be in the form of complete finished products or representative small specimens cut there-from.
|
Under development |
|
Edition : 5 |
|
Technical Committee |
83.100
Cellular materials
|
| ISO 2581:1975 |
Rigid cellular plastics — Determination of apparent thermal conductivity by means of a heat-flow meter |
|
Withdrawn |
1975-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2796:1980 |
Cellular plastics — Test for dimensional stability of rigid materials |
|
Withdrawn |
1980-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2796:1986 |
Cellular plastics, rigid — Test for dimensional stability |
Determination of the changes of linear dimensions which occur when the test specimens (100 mm x 100 mm x 25 mm) have been subjected to specified environments for a definite period of time and reconditioned. The method suggests a range of conditions of temperature and humidity, from which one or more of the desired test conditions can be selected.
|
Published |
1986-08 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2798:1974 |
Withdrawal of ISO 2798-1974 |
|
Withdrawn |
1974-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2896:1987 |
Cellular plastics, rigid — Determination of water absorption |
Specifies a method for the determination of the water absorption of rigid cellular plastics by measuring the change in the buoyant force resulting from immersion of a specimen in water for 4 days. Corrections are specified to take account of any change in volume of the specimen and also tocorrect for the volume of water in the cut surface cells of the specimen. Water absorption is expessed as an average percentage increase over the orginal volume of the specimen.
|
Withdrawn |
1987-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 2896:2001 |
Rigid cellular plastics — Determination of water absorption |
This International Standard specifies a method for the determination of the water absorption of rigid cellular plastics
by measuring the buoyant force on a test specimen after immersion under a 50 mm head of water for 4 days.
Corrections are specified to take account of any change in volume of the specimen and also to correct for the
volume of water in the cut surface cells of the specimen. The water absorption is expressed as the average, for
several specimens, of the percentage increase in volume relative to the original volume.
The method described is intended for quality control and for use in product specifications.
|
Published |
2001-07 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3385:1982 |
Cellular polymeric flexible materials — Determination of fatigue by constant load pounding |
|
Withdrawn |
1982-02 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3385:1989 |
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding |
Specifies the determination of loss in thickness and loss in hardness of materials intended for use in upholstery. Provides a means of assessing the service performance. The method is applicable both to standard size test pieces cut from stock material and to shaped components. Formulas are given to express the loss in thickness and the loss in hardness. Two figures show the details of a manually adjusted machine and an automatically adjusted. Constitutes a minor revision of the second edition (ISO 3385:1982).
|
Withdrawn |
1989-11 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3385:2014 |
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding |
ISO 3385:2014 specifies a method for the determination of loss in thickness and loss in hardness of flexible cellular materials intended for use in load-bearing applications such as upholstery. It provides a means of assessing the service performance of flexible cellular materials based on rubber latex or polyurethane used in load-bearing upholstery.
The method is applicable both to standard size test pieces cut from slabstock material and to shaped components. The measured loss in thickness and loss in hardness are related to, but are not necessarily the same as, the losses likely to occur in service.
ISO 3385:2014 is not intended to function as a detailed engineering design specification for fatigue apparatus.
|
Published |
2014-07 |
Edition : 4 |
Number of pages : 13 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3386-1:1979 |
Flexible cellular materials — Determination of compression stress/strain characteristic and compression stress value — Part 1: Low density materials |
|
Withdrawn |
1979-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3386-1:1986 |
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials |
Covers the determination of material with a density up to 250 kg/m3. It also indicates a method for the calculation of the compression stress value of such materials. The compression stress/strain characteristic is a measure of the load-bearing properties of the material. Two formulas allow to calculate the results. Part 2 refers to high density materials. Constitutes a minor revision of the first edition (ISO 3386/1-1979).
|
Published |
1986-06 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3386-1:1986/Amd 1:2010 |
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials — Amendment 1 |
|
Published |
2010-04 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3386-2:1984 |
Polymeric materials, cellular flexible — Determination of stress-strain characteristic in compression — Part 2: High density materials |
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3386-2:1997 |
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials |
|
Published |
1997-06 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
83.100
Cellular materials
|
| ISO 3386-2:1997/Amd 1:2010 |
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials — Amendment 1 |
|
Published |
2010-04 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 12543-4:1998 |
Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability |
|
Withdrawn |
1998-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
81.040.20
Glass in building
|
| ISO 3582:1978 |
Cellular plastic and cellular rubber materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
|
Withdrawn |
1978-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.100
Cellular materials
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 3582:2000 |
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
Cette norme internationale spécifie une méthode d'essai à petite échelle en laboratoire, permettant une première comparaison des caractéristiques relatives de combustion de petites éprouvettes de matériaux polymères alvéolaires souples, lorsqu'elles sont soumises, en position horizontale, à une source de chaleur de faible énergie. Elle est prévue uniquement pour l'estimation rapide et simple des caractéristiques de combustion des petites éprouvettes de matériaux, considérés sans référence aux conditions d'environnement sous lesquelles le matériau, ou les produits qui en découlent peuvent être utilisés. En conséquence, il n'est pas possible d'établir une corrélation entre les résultats de cet essai et la performance de tels matériaux ou produits dans des conditions réelles d'utilisation. L'essai est réduit aux éprouvettes d'essai d'une épaisseur supérieure à 5 mm. Les résultats des essais sur les éprouvettes d'essai de différentes épaisseurs ne sont pas comparables. Cette méthode d'essai ne doit pas être utilisée pour estimer le risque potentiel de feu dans les conditions réelles d'emploi.
|
Published |
2000-12 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.100
Cellular materials
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 3582:2000/Amd 1:2007 |
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1 |
|
Published |
2007-09 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 4590:1981 |
Cellular plastics — Determination of volume percentage of open and closed cells of rigid materials |
Specifies a general method ba measurement first of geometrical volume and of the air impenetrable volume of test specimens. This method provides for correcting the apparent open cell volume by taking into account the surface cell opened by cutting during specimen preparation. Two alternative methods and corresponding apparatus are specified for the measurement of the impenetrable volume. The results are to be used for comparison purposes only.
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4590:2002 |
Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells |
This International Standard specifies a general procedure for the determination of the volume percentage of open and of closed cells of rigid cellular plastics, by measurement first of the geometrical volume and then of the air-impenetrable volume of test specimens. The procedure includes the correction of the apparent open-cell volume by taking into account the surface cells opened by cutting during specimen preparation. Two alternative methods (method 1 and method 2), and corresponding apparatus, are specified for the measurement of the impenetrable volume. The results obtained from method 2 are intended to be used for comparison purposes only.
|
Withdrawn |
2002-03 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4590:2016 |
Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells |
|
Published |
2016-07 |
Edition : 3 |
Number of pages : 22 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4638:1984 |
Polymeric materials, cellular flexible — Determination of air flow permeability |
Applicable to test pieces cut from products of cellular materials. Useful for two purposes: a) studying the structure of cellular products in connection with their physical properties and their method of manufacture and b) ensuring product quality (quality assurance). Describes principle, apparatus, test piece and conditions, procedure and calculation and expression of the results. Three figures deliver the details for testing.
|
Published |
1984-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4651:1979 |
Cellular rubbers and plastics — Determination of dynamic cushioning performance |
|
Withdrawn |
1979-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4651:1988 |
Cellular rubbers and plastics — Determination of dynamic cushioning performance |
Defines a method measuring the peak deceleration of a mass when it is dropped on a test piece. The test described is intended primarily for quality assurance; however, an annex contains notes to be considered if the test is used to obtain design data. Two figures show typical arrangements.
|
Published |
1988-12 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4651:1988/Amd 1:2006 |
Cellular rubbers and plastics — Determination of dynamic cushioning performance — Amendment 1 |
|
Published |
2006-09 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4897:1985 |
Cellular plastics — Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures |
Specifies two methods for determing the coefficient of linear thermal expansion. Method A is the preferred method, it gives a value on a large sample at a chosen temperature. Method B should be employed to obtain an average coefficient for the temperature interval between the cryogenic temperature and the ambient temperature. In an annex the test apparatures for both methods are described in detail.
|
Published |
1985-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4898:1984 |
Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings |
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4898:1984/Add 1:1988 |
Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Addendum 1: Phenol-formaldehyde cellular plastics (RC/PF) |
|
Withdrawn |
1988-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4898:1984/Add 2:1988 |
Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Addendum 2: Labelling and marking of products |
|
Withdrawn |
1988-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4898:1984/Amd 4:2000 |
Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Amendment 4 |
|
Withdrawn |
2000-04 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
83.100
Cellular materials
|
| ISO 4898:2004 |
Rigid cellular plastics — Thermal insulation products for buildings — Specifications |
ISO 4898:2004 specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They may also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.
This International Standard is not applicable to materials used for the thermal insulation of pipes and vessels, for impact sound absorption or for acoustical insulation.
This International Standard covers the following cellular materials used in the thermal insulation of buildings:
RC/PS based on polystyrene;RC/PUR based on polyurethanes made with isocyanates;RC/PF based on phenolic polymer.
|
Withdrawn |
2004-08 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
83.100
Cellular materials
;
91.100.60
Thermal and sound insulating materials
|
| ISO 4898:2006 |
Rigid cellular plastics — Thermal insulation products for buildings — Specifications |
ISO 4898:2006 specifies requirements and methods of testing for four categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They may also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.
It is not applicable to materials used for the thermal insulation of pipes and vessels, for impact sound absorption or for acoustical insulation.
It covers the following cellular materials used in the thermal insulation of buildings:
PF based on phenolic polymer;EPS based on expanded polystyrene;XPS based on extruded polystyrene;PUR based on polyurethane.
|
Withdrawn |
2006-04 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
83.100
Cellular materials
;
91.100.60
Thermal and sound insulating materials
|
| ISO 4898:2008 |
Rigid cellular plastics — Thermal insulation products for buildings — Specifications |
ISO 4898:2008 specifies requirements and methods of testing for four categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They may also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.
It is not applicable to materials used for the thermal insulation of pipes and vessels, for impact sound absorption or for acoustical insulation.
It covers the following cellular materials used in the thermal insulation of buildings:
— PF based on phenolic polymer;
— EPS based on expanded polystyrene;
— XPS based on extruded polystyrene;
— PUR based on polyurethane.
|
Withdrawn |
2008-03 |
Edition : 4 |
Number of pages : 14 |
Technical Committee |
83.100
Cellular materials
;
91.100.60
Thermal and sound insulating materials
|
| ISO 4898:2010 |
Rigid cellular plastics — Thermal insulation products for buildings — Specifications |
ISO 4898:2010 specifies requirements and methods of testing for four categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They may also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.
It is not applicable to materials used for the thermal insulation of pipes and vessels, for impact sound absorption or for acoustical insulation.
It covers the following cellular materials used in the thermal insulation of buildings:
PF based on phenolic polymer;
EPS based on expanded polystyrene;
XPS based on extruded polystyrene;
PUR based on polyurethane.
|
Withdrawn |
2010-03 |
Edition : 5 |
Number of pages : 14 |
Technical Committee |
83.100
Cellular materials
;
91.100.60
Thermal and sound insulating materials
|
| ISO 4898:2018 |
Rigid cellular plastics — Thermal insulation products for buildings — Specifications |
ISO 4898:2018 specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They can also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.
ISO 4898:2018 is not applicable to materials used for the thermal insulation of pipes and vessels, for impact sound absorption or for acoustical insulation.
ISO 4898:2018 covers the following cellular materials used in the thermal insulation of buildings:
- PF based on phenolic polymer;
- EPS based on expanded polystyrene;
- XPS based on extruded polystyrene;
- PUR based on polyurethane.
The limiting quality values in this document are for use only in the specification of materials between purchaser and supplier, and are not intended to be used for design purposes.
Additional requirements for special applications can be added to those specified in this document by agreement between purchaser and supplier.
|
Published |
2018-03 |
Edition : 6 |
Number of pages : 13 |
Technical Committee |
83.100
Cellular materials
;
91.100.60
Thermal and sound insulating materials
|
| ISO 5999:1982 |
Polymeric materials, cellular flexible — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification |
Applicable to material manufactured in block, sheet and stripform, in moulded and fabricated shapes, and as reconstituted material. The foam is classified according to performance during a fatigue test, indentation hardness being used as a secondary means of grading material. Several tables and two diagrams give further details. Three annexes contain the calculation of specification limits, recommended applications and the burning properties.
|
Withdrawn |
1982-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
83.100
Cellular materials
|
| ISO 5999:2007 |
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification |
ISO 5999:2007 specifies requirements for flexible load-bearing polyurethane foam of the polyether type.
It is applicable to flexible polyurethane cellular materials manufactured in block, sheet and strip form, in moulded and fabricated shapes, and as reconstituted material, used for load-bearing applications in general, but excluding carpet backing and underlay. It thus primarily relates to the quality of polyurethane foam used for comfort cushioning purposes.
The foam is classified according to performance during a fatigue test, indentation hardness index being used as a secondary means of grading the material.
The standard is not applicable to polyurethane foams foamed in place or to foams for use in heat-welded systems unless for load-bearing purposes.
Recommended applications for the range of flexible polyurethane foams covered by the standard are listed in an annex.
|
Withdrawn |
2007-11 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
83.100
Cellular materials
|
| ISO 5999:2013 |
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification |
ISO 5999:2013 specifies requirements for flexible load-bearing polyurethane foam of the polyether type.
ISO 5999:2013 is applicable to flexible polyurethane cellular materials manufactured in block, sheet and strip form, in moulded and fabricated shapes, and as reconstituted material, used for load-bearing applications in general, but excluding carpet backing and underlay. It, thus, primarily relates to the quality of polyurethane foam used for comfort cushioning purposes.
|
Published |
2013-09 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6187:2001 |
Rigid cellular plastics — Determination of friability |
This International Standard specifies a method for the determination of the mass loss of rigid cellular plastics as a
result of a combination of abrasion and impact produced by a laboratory tumbling mechanism.
|
Published |
2001-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6453:1985 |
Polymeric materials, cellular flexible — Polyvinylchloride foam sheeting — Specification |
Related to two types of sheetings: open cell material and closed cell material. They are graded according to hardness index. For type 1 sheeting a single hardness level is specified, but for type 2 sheeting a range. For sheeting up to approximately 100 mm the material indentation hardness index is specified. For type 2, mostly available in thicknesses much less than 50 mm, it is necessary to use a test piece consisting of a number of plies, therefore the product indentation hardness index is specified. An annex about organic materials staining.
|
Published |
1985-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6915:1984 |
Polymeric materials, cellular flexible — Polyurethane foam for laminate use — Specification |
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6915:1991 |
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification |
Specifies the minimum requirements for the following three types of foams with thicknesses up to 20 mm: 1) polyether; 2) polyester with minimum elongation at break of 200 %; 3) polyester with minimum elongation at break of 300 %. This second edition cancels and replaces the first edition (1984).
|
Withdrawn |
1991-11 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6915:2019 |
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification |
This document specifies the minimum requirements for flexible polyurethane foams up to and including 20 mm thick intended for combination with suitable substrates such as non-woven, woven or knitted fabrics, to form a laminate.
Three types of flexible polyurethane foam are specified as follows:
— type 1: polyether;
— type 2: polyester with minimum elongation at break of 200 %;
— type 3: polyester with minimum elongation at break of 300 %.
|
Published |
2019-08 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6916-1:1995 |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting |
Classifies flexible sponge and expanded cellular rubber products. Base material used in their manufacture may be natural rubber, reclaimed rubber or synthetic rubber, either alone or in combination. Does not apply to latex foam rubbers, shoe soling, ebonite cellular rubbers, semi-rigid urethane foams, PVC or PVC blended with other polymers. All products are in the form of sheeting.
|
Published |
1995-07 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6916-1:1995/Amd 1:2007 |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Amendment 1 |
|
Published |
2007-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6916-1:1995/Cor 1:2002 |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Technical Corrigendum 1: Sheeting |
|
Published |
2002-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.100
Cellular materials
|
| ISO 6916-2:2001 |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions |
This part of ISO 6916 classifies flexible cellular rubber products known as sponge and expanded rubber. The base
material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber or rubber-like
material, either alone or in combination. Thermoplastic rubbers are not included. This part of ISO 6916 does not
apply to latex foam rubbers or shoe soling.
Sheeting materials are covered by ISO 6916-1. This part (part 2) covers vulcanized cellular rubber products that
are manufactured by a moulding or continuous vulcanization process, i.e. hot air, microwave, infra-red, liquid curing
medium (LCM), shearing-head vulcanization or a combination of two or more of these methods.
In the case of conflict between the provisions of this part of ISO 6916 and those of the detailed specification or test
method for a particular product, the latter shall take precedence. Reference to the methods shall specifically state
the desired test or tests.
|
Published |
2001-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
83.100
Cellular materials
|
| ISO/DIS 6916-2 |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions |
This part of ISO 6916 classifies flexible cellular rubber products known as sponge and expanded rubber. The base
material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber or rubber-like
material, either alone or in combination. Thermoplastic rubbers are not included. This part of ISO 6916 does not
apply to latex foam rubbers or shoe soling.
Sheeting materials are covered by ISO 6916-1. This part (part 2) covers vulcanized cellular rubber products that
are manufactured by a moulding or continuous vulcanization process, i.e. hot air, microwave, infra-red, liquid curing
medium (LCM), shearing-head vulcanization or a combination of two or more of these methods.
In the case of conflict between the provisions of this part of ISO 6916 and those of the detailed specification or test
method for a particular product, the latter shall take precedence. Reference to the methods shall specifically state
the desired test or tests.
|
Under development |
|
Edition : 2 |
Number of pages : 23 |
Technical Committee |
83.100
Cellular materials
|
| ISO 7214:1985 |
Cellular plastics — Polyethylene — Methods of test |
|
Withdrawn |
1985-01 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.100
Cellular materials
|
| ISO 7214:1998 |
Cellular plastics — Polyethylene — Methods of test |
|
Withdrawn |
1998-03 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
83.100
Cellular materials
|
| ISO 7214:2007 |
Cellular plastics — Polyethylene — Methods of test |
ISO 7214:2007 specifies methods for testing flexible and semi-rigid cellular plastics made from polyethylene. Cellular plastics containing copolymers of ethylene or blends of polymers with polyethylene may also be tested by the procedures of this International Standard provided these materials have characteristics similar to polyethylene or copolymers of ethylene.
The tests are divided into mandatory tests suitable for characterization of cellular polyethylene regardless of end use, and optional tests for the determination of properties that are relevant to certain uses only.
|
Withdrawn |
2007-06 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
83.100
Cellular materials
|
| ISO 8307:2018 |
Flexible cellular polymeric materials — Determination of resilience by ball rebound |
This document specifies a method for determining the resilience by ball rebound of flexible cellular polymeric materials.
|
Published |
2018-07 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
83.100
Cellular materials
|