| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 5290:1978 |
Grooved pulleys for joined narrow V-belts — Groove sections 9J, 15J, 20J and 25J |
|
Withdrawn |
1978-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5290:1985 |
Grooved pulleys for joined narrow V-belts — Groove sections 9J, 15J, 20J and 25J |
|
Withdrawn |
1985-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5290:1993 |
Belt drives — Grooved pulleys for joined narrow V-belts — Groove sections 9J, 15J, 20J, and 25J (effective system) |
This third edition cancels and replaces the second edition (1985). Specifies the principal characteristics of grooved pulleys intended for V-belts for industrial power transmission drives. Tabulates the nominal effective diameters from 67 mm up to and including 2500 mm. An annex gives some background informations.
|
Withdrawn |
1993-04 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5290:2001 |
Belt drives — Grooved pulleys for joined narrow V-belts — Groove sections 9N/J, 15N/J and 25N/J (effective system) |
This International Standard specifies the principal characteristics of grooved pulleys (for groove sections 9N/J,
15N/J and 25N/J) intended to take both single and joined narrow V-belts for industrial power transmission drives.
Some background information on the series of effective diameters is given in annex A.
NOTE The effective width of a groove is regarded as the basic dimension of standardization in the effective system for
grooves and for the corresponding narrow V-belts considered as a whole.
|
Published |
2001-09 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5291:1987 |
Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective system) |
|
Withdrawn |
1987-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5291:1993 |
Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective system) |
Specifies the principal characteristics (groove angle, profile dimensions, effective diameter) and geometrical inspection of grooves; quality, surface finish and balancing of pulleys are dealt with in ISO 254.
|
Withdrawn |
1993-05 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5291:2011 |
Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective system) |
ISO 5291:2011 specifies the principal characteristics of grooved pulleys (for groove sections AJ, BJ, CJ and DJ), intended to take joined classical V-belts for industrial power transmission drives.
|
Published |
2011-12 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5292:1980 |
Industrial V-belt drives — Calculation of power ratings |
|
Withdrawn |
1980-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5292:1995 |
Belt drives — V-belts and V-ribbed belts — Calculation of power ratings |
Cancels and replaces the first edition (1980). Specifies generally acceptable formulae for power ratings, together with appropriate correction terms and factors used in the design of industrial V-belt and V-ribbed belt drives with two pulleys.
|
Withdrawn |
1995-03 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5294:1979 |
Synchronous belt drives — Pulleys |
|
Withdrawn |
1979-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5294:1979/Add 1:1983 |
Synchronous belt drives — Pulleys — Addendum 1 |
|
Withdrawn |
1983-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5294:1989 |
Synchronous belt drives — Pulleys |
This second edition cancels and replaces the first edition (1979). Specifies the principal characteristics of sychronous pulleys for use in synchronous endless belt drives for mechanical power and where positive indexing or sychronization may be required. The principal characteristics include: tooth dimensions and tolerances, pulley dimensions and tolerances, quality specification.
|
Withdrawn |
1989-07 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5294:2012 |
Synchronous belt drives — Pulleys |
ISO 5294:2012 specifies the principal characteristics of synchronous pulleys for use in synchronous endless belt drives for mechanical power transmission and where positive indexing or synchronization is required.
The principal characteristics include tooth dimensions and tolerances, pulley dimensions and tolerances, and quality specification.
As far as dimensions are concerned, the pulleys specified in ISO 5294:2012 are used interchangeably with the belts specified in ISO 5296.
|
Withdrawn |
2012-12 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5295:1981 |
Synchronous belts — Calculation of power rating and drive centre distance |
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5295:1987 |
Synchronous belts — Calculation of power rating and drive centre distance |
This second edition cancels and replaces the first edition (1981). Establishes formulae for the calculation of power synchronous belts on two pulley drives. The numerical values of certain parameters used in the calculation depend upon the pitch and the construction of the belt and shall be specified by the belt manufacturer.
|
Withdrawn |
1987-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5295:2017 |
Synchronous belts — Calculation of power rating and drive centre distance |
ISO 5295:2017 establishes formulae for the calculation of power rating and centre distance of standard synchronous belts on two pulley drives.
It is applicable to trapezoidal belts only. It does not apply to curvilinear synchronous belts.
The numerical values of certain parameters used in the calculations depend upon the pitch and the construction of the belt and are specified by the belt manufacturer.
|
Published |
2017-04 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO/FDIS 5295 |
Synchronous belts — Calculation of power rating and drive centre distance |
ISO 5295:2017 establishes formulae for the calculation of power rating and centre distance of standard synchronous belts on two pulley drives.
It is applicable to trapezoidal belts only. It does not apply to curvilinear synchronous belts.
The numerical values of certain parameters used in the calculations depend upon the pitch and the construction of the belt and are specified by the belt manufacturer.
|
Under development |
|
Edition : 4 |
Number of pages : 5 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5296-1:1989 |
Synchronous belt drives — Belts — Part 1: Pitch codes MXL, XL, L, H, XH and XXH — Metric and inch dimensions |
This second edition cancels and replaces the first edition of ISO 5296:1978, as well as its addenda 1 and 2 of 1982. This part specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives for mechnical power transmission and where positive indexing or synchronization may be required.
|
Withdrawn |
1989-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5296-2:1989 |
Synchronous belt drives — Belts — Part 2: Pitch codes MXL and XXL — Metric dimensions |
This part specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives for mechanical power transmission and where positive indexing or synchronization may be required. Applies to synchronous belt drives having a pitch equal to 2,032 or 3,175 mm.
|
Withdrawn |
1989-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5296:1978 |
Synchronous belt drives — Belts |
|
Withdrawn |
1978-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5296:1978/Add 1:1982 |
Synchronous belt drives — Belts — Addendum 1 |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5296:1978/Add 2:1982 |
Synchronous belt drives — Belts — Addendum 2 |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 5296:2012 |
Synchronous belt drives — Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH — Metric and inch dimensions |
|
Withdrawn |
2012-05 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 8370-1:1993 |
Belt drives — Dynamic test to determine pitch zone location — Part 1: V-belts |
The method specified applies to a single V-belt in a single pulley groove or to a joined V-belt in a multiple pulley. The location of the pitch zone is expressed as an effective line differential or a datum line differential, respectively. A hexagonal belt can be treated as a single V-belt.
|
Published |
1993-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9982:1991 |
Belt drives — Pulleys and V-ribbed belts for industrial applications — Dimensions — PH, PJ, PK, PL and PM profiles |
|
Withdrawn |
1991-01 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 8370-2:1993 |
Belt drives — Dynamic test to determine pitch zone location — Part 2: V-ribbed belts |
The principle of the method specified is calculation of the pitch diameter of the belt operating in the pulley on a test fixture by measuring the rotational frequency of the pulley and either the belt velocity over a straight span or the centre distance between the pulleys and the time of rotation of the belt, and calculation of the effective line differential.
|
Published |
1993-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 8370:1987 |
V- and ribbed V-belts — Dynamic test to determine pitch zone location |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 8419:1987 |
Narrow joined V-belts — Lengths in effective system |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 8419:1994 |
Belt drives — Narrow joined V-belts — Lengths in effective system |
Specifies for V-belts of cross-sections: 9J (effective width 8,9 mm), 15J (effective width 15,2 mm), 20J (effective width 20,9 mm), 25J (effective width 25,4 mm), the recommended effective lengths and their tolerances, and the conditions for measuring the effective length.
|
Withdrawn |
1994-06 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 8419:2003 |
Belt drives — Narrow V-belts — Sections 9N/J, 15N/J and 25N/J (lengths in the effective system) |
ISO 8419:2003 specifies, for narrow V-belts of cross-sections 9N/J (for pulley grooves of effective width 8,9 mm), 15N/J (for pulley grooves of effective width 15,2 mm) and 25N/J (for pulley grooves of effective width 25,4 mm), the standard effective lengths, the tolerances on effective lengths, the centre distance variations, the conditions for measuring the effective length and the centre distance variation, and the designation and marking.
|
Published |
2003-02 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9563:1990 |
Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method |
|
Withdrawn |
1990-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9563:2015 |
Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method |
ISO 9563:2015 specifies the maximum and minimum electrical resistance of antistatic endless and open ended synchronous belts. This International Standard provides guidelines to allow testing of synchronous belts to prove their static conductive (dissipative) properties as well as a corresponding production control test method.
The application of this International Standard is limited to new belts intended to be used in an explosive atmosphere or in situations where there is a fire risk. The test is intended to ensure that the belt is sufficiently conductive to dissipate charges of electricity which may form on it in service.
In the case of a production control test, the decision is left to national standards or agreement between interested parties as to whether the test shall be carried out on each belt in a batch or on only a percentage of belts in a batch.
For each proof test, the belt manufacturer shall determine which type of electrode and conductive coating material shall be used.
|
Published |
2015-09 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9608:1988 |
V-belts — Uniformity of belts — Centre distance variation — Specifications and test method |
|
Withdrawn |
1988-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9608:1994 |
V-belts — Uniformity of belts — Test method for determination of centre distance variation |
Cancels and replaces the first edition (1988). Specifies a test method for determining the centre distance variation of V-belt drives as a criterion for the uniformity of V-belts.
|
Withdrawn |
1994-08 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9608:2022 |
V-belts and V-ribbed belts — Uniformity of belts — Test method for determination of centre distance variation |
This document specifies a test method for determining the centre distance variation of V-belt and V‑ribbed belt drives as a criterion for the uniformity of V-belts and V-ribbed belts.
This document does not apply to elastic V-ribbed belts.
|
Published |
2022-05 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9980:1990 |
Belt drives — Grooved pulleys for V-belts (system based on effective width) — Geometrical inspection of grooves |
|
Withdrawn |
1990-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9980:2012 |
Belt drives — Grooved pulleys for V-belts (system based on effective width) — Geometrical inspection of grooves |
ISO 9980:2012 specifies the methods of checking the regularity of the grooves and pulleys for V-belts specified in the system based on effective width. The grooved pulleys can be designed for use with classical or narrow V-belts. The V-belts can be either single or joined units.
|
Published |
2012-11 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 9982:2021 |
Belt drives — Pulleys and V-ribbed belts for industrial applications — PH, PJ, PK, PL and PM profiles: dimensions |
This document specifies the principal dimensional characteristics of V-ribbed pulley groove profiles, together with the corresponding endless V-ribbed belts, of PH, PJ, PK, PL and PM profiles which are used for general industrial applications except elastic belts.
The PK belt was originally established for automotive accessory drive applications and ISO 9981 deals specifically with that particular field.
|
Published |
2021-09 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 11749:2014 |
Belt drive — V-ribbed belts for the automotive industry — Fatigue test |
ISO 11749:2014 specifies a dynamic test method for the quality control of V-ribbed belts (PK profile) which are used predominantly for accessory drive applications in the automotive industry.
|
Published |
2014-02 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
21.220.10
Belt drives and their components
;
43.060.10
Engine block and internal components
|
| ISO/DIS 11749 |
Belt drives — V-ribbed belts for the automotive industry — Fatigue test |
ISO 11749:2014 specifies a dynamic test method for the quality control of V-ribbed belts (PK profile) which are used predominantly for accessory drive applications in the automotive industry.
|
Under development |
|
Edition : 3 |
Number of pages : 13 |
Technical Committee |
21.220.10
Belt drives and their components
;
43.060.10
Engine block and internal components
|
| ISO 12046:2012 |
Synchronous belt drives — Automotive belts — Determination of physical properties |
This International Standard specifies test methods for determining the physical properties of synchronous belts
used in driving engine parts, such as camshafts, fuel injection pumps, balancing shafts. These test methods
are intended to provide a means of characterizing synchronous belt properties for belts which are evaluated
and qualified by dynamic laboratory and field testing.
NOTE The dimensional characteristics of these belts are the subject of ISO 9010.
|
Published |
2012-03 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
21.220.10
Belt drives and their components
;
43.060.10
Engine block and internal components
|
| ISO 13050:1999 |
Curvilinear toothed synchronous belt drive systems |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 13050:2014 |
Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys |
ISO 13050:2014 specifies the principal characteristics of metric pitch curvilinear synchronous endless belts and pulleys in G, H, R, and S profile systems for use in synchronous belt drives (also known in the past as timing belt drives, positive belt drives, gear belt drives) for mechanical power transmission and where positive indexing or synchronization might be required.
The principal belt and pulley characteristics include the following: nominal belt tooth dimensions; belt tooth pitch spacing; belt length and width dimensions and tolerances; belt length measurement specifications; pulley groove dimensions and tolerances; pulley diameter and width dimensions and tolerances; pulley quality specification.
|
Withdrawn |
2014-12 |
Edition : 2 |
Number of pages : 54 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 13050:2022 |
Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys |
This document specifies the principal characteristics of metric pitch curvilinear synchronous endless belts and pulleys in G, H, R, and S profile systems for use in synchronous belt drives (also known in the past as timing belt drives, positive belt drives, gear belt drives) for mechanical power transmission and where positive indexing or synchronization can be required.
The principal belt and pulley characteristics include the following:
a) nominal belt tooth dimensions;
b) belt tooth pitch spacing;
c) belt length and width dimensions and tolerances;
d) belt length measurement specifications;
e) pulley groove dimensions and tolerances;
f) pulley diameter and width dimensions and tolerances;
g) pulley quality specification.
|
Published |
2022-03 |
Edition : 3 |
Number of pages : 56 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 17396:2014 |
Synchronous belt drives — Metric pitch, trapezoidal profile systems T and AT, belts and pulleys |
ISO 17396:2014 specifies the principal characteristics of synchronous endless and open belts and pulleys of the profile systems T and AT for use in synchronous belt drives for mechanical power transmission and where positive indexing or synchronization can be required.
The principal belt and pulley characteristics include
nominal belt tooth dimensions,
belt tooth pitch spacing,
belt length and width dimensions,
belt length measurement specifications,
pulley groove dimensions and tolerances,
pulley diameter and width dimensions and tolerances, and
pulley quality specification.
|
Withdrawn |
2014-01 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 433:2017 |
Conveyor belts — Marking |
ISO 433:2017 specifies the marking of conveyor belts, i.e.
- the indications to be marked;
- the dimensions of the marks;
- the position of the marks.
ISO 433:2017 does not apply to light conveyor belts as described in ISO 21183‑1.
|
Published |
2017-10 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 17396:2017 |
Synchronous belt drives — Metric pitch — Tooth profiles T and AT endless and open ended belts and pulleys |
ISO 17396:2017 specifies the principal characteristics of synchronous endless and open belts and pulleys of the profile systems T and AT for use in synchronous belt drives for mechanical power transmission and where positive indexing or synchronization can be required.
NOTE Synchronous belt drives have been known by various titles in the past: for example, timing belt drives, positive belt drives, gear belt drives.
The principal belt and pulley characteristics include
a) nominal belt tooth dimensions,
b) belt tooth pitch spacing,
c) belt length and width dimensions,
d) belt length measurement specifications,
e) pulley groove dimensions and tolerances,
f) pulley diameter and width dimensions and tolerances, and
g) pulley quality specification.
The belts of the profile systems T and AT are made of polyurethane with high-tension fine steel cord tension members in most cases. As far as certain forces are given in this document, these values are only valid for these kinds of belt. For polyurethane belts with different tensile cords, i.e. aramid or rubber belts reinforced with glass fibre, the values can be different. It is intended that the user and the manufacturer agree about suitable values. Open belts made of thermoplastic polyurethane can be spliced to work as endless belts in conveyor applications. In this case, the tolerances are not valid for the splicing area of the endless spliced belt.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 19347:2015 |
Synchronous belt drives — Imperial pitch trapezoidal profile system — Belts and pulleys |
ISO 19347:2015 specifies the principal characteristics of synchronous endless belts and pulleys for use in synchronous endless belt drives[1] for mechanical power transmission and where positive indexing or synchronization is required.
The principal characteristics includes the following:
a) belt nominal tooth dimensions;
b) belt length and width dimensions and tolerances;
c) belt length-measurement specifications;
d) pulley grooves dimensions and tolerances;
e) pulley dimensions and tolerances;
f) pulley quality specification.
[1] These drives have been known under various names in the past, for example: timing belt drives, positive belt drives, gear belt drives.
|
Published |
2015-10 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
21.220.10
Belt drives and their components
|
| ISO 21342:2019 |
Synchronous belt drives — Automotive belts and pulleys |
This document specifies the characteristics of synchronous endless belts and their related pulleys for use in automotive applications such as engine camshaft drives.
The characteristics include:
— belt pitch spacing;
— belt nominal tooth dimensions;
— belt width and width tolerance;
— belt pitch length and pitch length tolerance;
— pulley groove dimensions and tolerances;
— pulley tolerances and quality specifications.
Test methods for measuring belt pitch length and lateral runout are also included.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
21.220.10
Belt drives and their components
;
43.060.10
Engine block and internal components
|
| ISO 251:1987 |
Conveyor belts — Widths and lengths |
This second edition cancels and replaces the first edition (1976). Specifies the width of belts and corresponding tolerances, and also tolerances (the lengths of conveyor belts are not standardized). Tabulates the nominal widths from 300 mm up to and including 3200 mm.
|
Withdrawn |
1987-07 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 251:2003 |
Conveyor belts with textile carcass — Widths and lengths |
ISO 251:2003 specifies the widths and lengths of conveyor belts with a textile carcass. It also specifies the corresponding tolerances.
The lengths of conveyor belts are not standardized.
|
Withdrawn |
2003-06 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 251:2012 |
Conveyor belts with textile carcass — Widths and lengths |
|
Published |
2012-10 |
Edition : 4 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 252-1:1999 |
Textile conveyor belts — Adhesive strength between constitutive elements — Part 1: Methods of test |
|
Withdrawn |
1999-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 252-1:1999/Cor 1:2006 |
Textile conveyor belts — Adhesive strength between constitutive elements — Part 1: Methods of test — Technical Corrigendum 1 |
|
Withdrawn |
2006-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 252:1975 |
Conveyor belts — Minimum requirements for ply adhesion and method of test |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 252:1988 |
Conveyor belts — Ply adhesion between constitutive elements — Test method and requirements |
This second edition cancels and replaces the first edition (1975). Specifies the adhesion test methods and their minimum values bewtween plies, and between covers and carcase, of conveyor belts. It does not apply to heat- and oil-resistant conveyor belts.
|
Withdrawn |
1988-04 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 252:2007 |
Conveyor belts — Adhesion between constitutive elements — Test methods |
ISO 252:2007 specifies two test methods, A and B, for determining the adhesion strength between constitutive elements of a conveyor belt, i.e. between plies and between covers and carcass. Basic test conditions are in conformity with ISO 36.
It is applicable to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement, and textile-reinforced belts with a full-thickness tensile strength of less than 160 N/mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1.
|
Withdrawn |
2007-06 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 252:2023 |
Conveyor belts — Adhesion between constitutive elements — Test methods |
This document specifies two test methods, A and B, for determining the adhesion strength between constitutive elements of a conveyor belt, i.e. between plies and between covers and carcass. Basic test conditions are in conformity with ISO 36.
It is applicable to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement, and textile-reinforced belts with a full-thickness tensile strength of less than 160 N/mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1[1].
NOTE Methods A and B are alternative options, but the mean adhesive force values calculated for the two methods can be different. Also, as both methods might not be equally suitable for all belt constructions, it is advisable that the advice of the belt manufacturer be sought.
|
Published |
2023-03 |
Edition : 4 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 282:1975 |
Conveyor belts — Sampling |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 282:1992 |
Conveyor belts — Sampling |
Specifies the number of samples to be taken for carrying out acceptance tests, depending on the overall length ordered by the same user. Applicable to a batch of conveyor belts having the same characteristics: quality, width, etc.
|
Published |
1992-05 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 283-1:2000 |
Textile conveyor belts — Full thickness tensile testing — Part 1: Determination of tensile strength, elongation at break and elongation at the reference load |
|
Withdrawn |
2000-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 283-1:2000/Cor 1:2006 |
Textile conveyor belts — Full thickness tensile testing — Part 1: Determination of tensile strength, elongation at break and elongation at the reference load — Technical Corrigendum 1 |
|
Withdrawn |
2006-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 283:1980 |
Full thickness tensile strength and elongation of conveyor belts — Specifications and method of test |
|
Withdrawn |
1980-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 283:1990 |
Conveyor belts — Full thickness tensile strength and elongation — Specifications and method of test |
Specifies the conditions for full thickness tensile strength testing of conveyor belts and gives the corresponding specifications. Applies to both "surface" and "underground" belts. Does not apply to belts with a metal or with an aramid carcass. This second edition cancels and replaces the first edition (1980).
|
Withdrawn |
1990-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 283:2007 |
Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method |
ISO 283:2007 specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor belts having a textile carcass. The method can also be used for the determination of full thickness tensile strength in the transverse direction and the elongation at the breaking point, for use when the manufacturer is requested by the purchaser to state values for these properties. It is not suitable or valid for light conveyor belts as described in ISO 21183-1.
|
Withdrawn |
2007-06 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 283:2015 |
Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method |
ISO 283:2015 specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor belts having a textile carcass. The method can also be used for the determination of full thickness tensile strength in the transverse direction and the elongation at the breaking point, for use when the manufacturer is requested by the purchaser to state values for these properties.
ISO 283:2015 is not suitable or valid for light conveyor belts as described in ISO 21183‑1.
|
Withdrawn |
2015-11 |
Edition : 4 |
Number of pages : 9 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO/R 434:1965 |
Withdrawal of ISO/R 434-1965 |
|
Withdrawn |
1965-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 283:2023 |
Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method |
This document specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor belts having a textile carcass. The method can also be used for the determination of full thickness tensile strength in the transverse direction and the elongation at the breaking point, for use when the manufacturer is requested by the purchaser to state values for these properties.
This document does not apply to light conveyor belts as described in ISO 21183‑1.
|
Published |
2023-03 |
Edition : 5 |
Number of pages : 10 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 284:1982 |
Conveyor belts — Electrical conductivity — Specification and method of test |
This second editions cancels and replaces the first edition (1975). Specifies the maximum electrical resistance of a conveyor belt and the corresponding mehtod of measurement. The test is intended to ensure that the belt is sufficiently conductive to drain off charges of electricity which may form on it in service.
|
Withdrawn |
1982-05 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 340:1982 |
Flame retardation of conveyor belts — Specifications and method of test |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 340:1988 |
Conveyor belts — Flame retardation — Specifications and test method |
This secon edition cancels and replaces the first edition (1942). specifies conditions for a flame retardation test for conveyor belts, and the corresponding requirements. Three figures illustrate shapes and reference quantities of concern. To increase safety provision is made for performing the test on test pieces without covers.
|
Withdrawn |
1988-06 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 340:2004 |
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method |
ISO 340:2004 specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord conveyor belts.
|
Withdrawn |
2004-11 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
13.220.40
Ignitability and burning behaviour of materials and products
;
53.040.20
Components for conveyors
|
| ISO 340:2013 |
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method |
ISO 340:2013 specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord conveyor belts.
|
Withdrawn |
2013-04 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
13.220.40
Ignitability and burning behaviour of materials and products
;
53.040.20
Components for conveyors
|
| ISO 340:2022 |
Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method |
This document specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord conveyor belts.
|
Published |
2022-05 |
Edition : 5 |
Number of pages : 8 |
Technical Committee |
13.220.40
Ignitability and burning behaviour of materials and products
;
53.040.20
Components for conveyors
|
| ISO 432:1975 |
Ply type conveyor belts — Characteristics of construction |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 432:1989 |
Ply type conveyor belts — Characteristics of construction |
This second edition cancels and replaces the first edition (1975). Specifies the number and position of longitudinal and transverse joints. Is not applicable to belts with a metal carcase or to fire-retardant belts. Tabulates belt widths from 300 mm up to and including 3 200 mm.
|
Withdrawn |
1989-06 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 433:1982 |
Conveyor belts — Branding |
|
Withdrawn |
1982-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 433:1991 |
Conveyor belts — Marking |
|
Withdrawn |
1991-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 433:1991/Amd 1:2006 |
Conveyor belts — Marking — Amendment 1 |
|
Withdrawn |
2006-01 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO/R 459:1965 |
Withdrawal of ISO/R 459-1965 |
|
Withdrawn |
1965-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 505:2017 |
Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts |
ISO 505:2017 specifies a method of test for the measurement of the propagation resistance of an initial tear in textile conveyor belts, either in full thickness or of the carcass only.
This test is intended for application to textile belts in installations where there is a risk of longitudinal tearing.
|
Published |
2017-10 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 583-1:1999 |
Conveyor belts with a textile carcass — Total thickness and thickness of elements — Part 1: Methods of test |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 583-1:1999/Cor 1:2006 |
Conveyor belts with a textile carcass — Total thickness and thickness of elements — Part 1: Methods of test — Technical Corrigendum 1 |
|
Withdrawn |
2006-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 583:1975 |
Conveyor belts — Tolerances on total thickness and thickness of covers |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 583:1990 |
Conveyor belts with a textile carcass — Tolerances on total thickness and thickness of covers — Direct measurement method |
Specifies: a) the maximum difference between the total thickness measured at any two points of the area of a conveyor belt; b) the permissible deviations on the thickness of each cover; c) the appropriate methods of measurement. Applies only to belts with a textile or an aramide carcass. This second edition cancels and replaces the first edition (1975).
|
Withdrawn |
1990-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 583:2007 |
Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods |
ISO 583:2007 specifies test methods for the determination of total belt thickness and the thickness of constitutive elements of conveyor belts having a textile carcass. The constitutive elements include the covers, the carcass and interlayers, i.e. the material between adjoining plies. It is not suitable or valid for light conveyor belts as described in ISO 21183-1.
|
Withdrawn |
2007-06 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 583:2023 |
Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods |
This document specifies test methods for the determination of total belt thickness and the thickness of constitutive elements of conveyor belts having a textile carcass. The constitutive elements include the covers, the carcass and interlayers, i.e. the material between adjoining plies.
This document does not apply to light conveyor belts as described in ISO 21183‑1.
|
Published |
2023-02 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO/R 608:1967 |
Withdrawal of ISO/R 608-1967 |
|
Withdrawn |
1967-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 610:1979 |
High-tensile steel chains (round link) for chain conveyors and coal ploughs |
|
Withdrawn |
1979-11 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 610:1990 |
High-tensile steel chains (round link) for chain conveyors and coal ploughs |
|
Published |
1990-08 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 703-1:1999 |
Conveyor belts — Transverse flexibility and troughability — Part 1: Test method |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 703-1:1999/Cor 1:2006 |
Conveyor belts — Transverse flexibility and troughability — Part 1: Test method — Technical Corrigendum 1 |
|
Withdrawn |
2006-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 703:1975 |
Conveyor belts — Troughability — Characteristic and method of test |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 703:1988 |
Conveyor belts — Troughability — Characteristics of transverse flexibility and test method |
This second edition cancels and replaces the first edition (1975). Specifies the troughability characteristics of belts and the method for determining the transverse flexibility which allows calculation of throughability. Some figures illustrate shapes and reference quantities of concern.
|
Withdrawn |
1988-03 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 703:2007 |
Conveyor belts — Transverse flexibility (troughability) — Test method |
ISO 703:2007 specifies a test method for determining the transverse flexibility (troughability) of a conveyor belt, expressed as a ratio, F/L. The method is not suitable or valid for light conveyor belts as described in ISO 21183-1.
|
Withdrawn |
2007-06 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 703:2017 |
Conveyor belts — Transverse flexibility (troughability) — Test method |
ISO 703:2017 specifies a test method for determining the transverse flexibility (troughability) of a conveyor belt, expressed as a ratio, F/L. The method is not suitable or valid for light conveyor belts as described in ISO 21183‑1.
|
Published |
2017-01 |
Edition : 4 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1082:1984 |
Mining — Shackle type connector units for chain conveyors |
|
Withdrawn |
1984-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 1082:1990 |
Mining — Shackle type connector units for chain conveyors |
This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of connector units. Each unit consists of the following components: shackle type connector, connector bolt, connector nut. It does not indicate a complete design, but it gives sufficient detail to ensure dimensional compatibility with chains complying with ISO 610 and scraper bars complying with ISO 5612.
|
Published |
1990-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 1120:1976 |
Conveyor belts — Determination of strength of mechanical fastenings — Static test method |
|
Withdrawn |
1976-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1120:1984 |
Conveyor belts — Determination of strength of mechanical fastenings — Static test method |
This second edition cancels and replaces the first edition (1976). Specifies a test method for measuring the strength of a conveyor belt mechanical fastening; the joint can be of either the permanent type or capable of disconnection. Is not applicable to vulcanized joints. Some figures illustrate shapes and reference quantities of concern.
|
Withdrawn |
1984-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|