| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 1120:2002 |
Conveyor belts — Determination of strength of mechanical fastenings — Static test method |
This European Standard specifies a static test method for measuring the strength of a conveyor belt mechanical fastening; the mechanical joints can be either of the type employing a connecting rod or of a type which does not employ a connecting rod.
This standard does not cover vulcanized joints.
NOTE The purpose of the test specified in this standard is to eliminate mechanical fastenings of insufficient static strength. A dynamic test will be established at a later date.
The standard is not applicable or valid for light conveyor belts as described in EN 873.
|
Withdrawn |
2002-04 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1120:2012 |
Conveyor belts — Determination of strength of mechanical fastenings — Static test method |
ISO 1120:2012 specifies a static test method for measuring the strength of a conveyor belt mechanical fastening; the mechanical joints can be either of the type employing a connecting rod or of a type which does not employ a connecting rod.
|
Published |
2012-10 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1121:1976 |
Conveyor belts — List of characteristics which may be required according to use |
|
Withdrawn |
1976-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1275:1972 |
Extended pitch precision roller chains and chain wheels for transmission and conveyors |
|
Withdrawn |
1972-07 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
21.220.30
Chain drives and their components
;
53.040.20
Components for conveyors
|
| ISO 1275:1972/Amd 1:1982 |
Extended pitch precision roller chains and chain wheels for transmission and conveyors — Amendment 1 |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
21.220.30
Chain drives and their components
;
53.040.20
Components for conveyors
|
| ISO 1275:1984 |
Extended pitch precision roller chains and chain wheels for transmission and conveyors |
|
Withdrawn |
1984-03 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
21.220.30
Chain drives and their components
;
53.040.20
Components for conveyors
|
| ISO 3411:1982/Amd 2:1994 |
Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope — Amendment 2 |
|
Withdrawn |
1994-10 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 1275:1995 |
Double-pitch precision roller chains and sprockets for transmission and conveyors |
Cancels and replaces the second edition (1984). Specifies requirements for double-pitch precision roller chains suitable for the mechanical transmission of power and for conveyors, together with those for their associated sprockets. Covers dimensions, tolerances, length measurement, proof testing and minimum tensile strengths. The chains are intended for use under less onerous conditions with respect to speed and power transmitted than are the base chains from which they are derived.
|
Withdrawn |
1995-02 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
21.220.30
Chain drives and their components
;
53.040.20
Components for conveyors
|
| ISO 1275:2006 |
Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors |
ISO 1275.2006 specifies requirements for double-pitch precision roller chains suitable for the mechanical transmission of power and for conveyors, together with those for their associated sprockets. It covers dimensions, tolerances, length measurement, preloading and minimum tensile strengths.
These double-pitch chains have been derived from some of the short-pitch transmission precision roller chains covered by ISO 606 having certain common dimensions but of double the pitch.
The chains are intended for use under less onerous conditions with respect to speed and power transmitted than are the base chains from which they are derived.
ISO 1275.2006 primarily applies to sprockets with 5 to 75 teeth inclusive (with intermediate numbers of teeth 5 and a half to 74 and a half inclusive).
The preferred numbers of teeth are 7, 9, 10, 11, 13, 19, 27, 38 and 57.
|
Published |
2006-07 |
Edition : 4 |
Number of pages : 21 |
Technical Committee |
21.220.30
Chain drives and their components
;
53.040.20
Components for conveyors
|
| ISO 1535:1975 |
Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belts |
Specifies the belt width and belt edge clearance for troughed belt conveyors (non portable).
|
Published |
1975-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1536:1975 |
Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belt pulleys |
Specifies the diameters, length and manufacture of the belt pulleys for troughed belt conveyors (others than portable conveyors).
|
Published |
1975-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1537:1975 |
Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Idlers |
Specifies the dimensions of idlers and their arrangement and clearance for the above mentioned types of handling equipment with three idlers.
|
Published |
1975-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1816:1975 |
Continuous mechanical handling equipment for loose bulk materials and unit loads — Belt conveyors — Basic characteristics of motorized driving pulleys |
Specifies the basic characteristics (dimensions, power rating, nominal speed) of motorized driving pulleys for belt conveyors.
|
Published |
1975-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1977-1:1976 |
Conveyor chains, attachments and chain wheels — Part 1: Chains — Metric series |
|
Withdrawn |
1976-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1977-2:1974 |
Conveyor chains, attachments and chain wheels — Part 2: Chain wheels |
|
Withdrawn |
1974-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1977-3:1974 |
Conveyor chains, attachments and chain wheels — Part 3: Attachments — Metric series |
|
Withdrawn |
1974-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1977:2000 |
Conveyor chains, attachments and sprockets |
|
Withdrawn |
2000-11 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 1977:2006 |
Conveyor chains, attachments and sprockets |
ISO 1977:2006 specifies the characteristics of bush, plain and flanged roller chains of both solid and hollow bearing pin types designed for general conveying and mechanical handling duties, together with associated chain sprockets and attachments. The chain dimensions it specifies will ensure interchangeability of complete chains and individual links for repair purposes. It is applicable to sprockets with from 6 to 40 teeth. Control criteria for sprockets are defined to ensure correct meshing, operation and transmission of load in use under normal operating conditions. Specifications are also given for K attachments and deep plates for use with the conformant conveyor chains.
|
Published |
2006-08 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 3684:1976 |
Conveyor belts — Determination of minimum pulley diameters for belt-conveyors |
|
Withdrawn |
1976-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 3684:1990 |
Conveyor belts — Determination of minimum pulley diameters |
This second edition cancels and replaces the first edition (1976). Establishes a method of calculating minimum pulley diameters. Applies to belts made of rubber or plastics with textile or metal carcasses. Is not applicable to belts which have a carcass thickness of more than 20 mm or to those which have intermediate lyers of rubber or plastics of more than 0,8 mm thickness between the plies, and not applies to heat-resistant belts for hot products over 100 °C or to belts in service at temperatures under -40 °C.
|
Published |
1990-03 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 3684:1990/Amd 1:2006 |
Conveyor belts — Determination of minimum pulley diameters — Amendment 1 |
|
Published |
2006-01 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 3870:1976 |
Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials — Adjustment of take-up device |
Describes fixed and automatic take-up devices. Contains recommendations for adjustment values which are valid for the most commonly used belts. Tabulates various types of take-up devices with relation to conveyor lengths from 0 to 12 m up to 150 to 300 m. For belts with a fabric carcase whose length exceeds 300 m and belts with a metal carcase of any length, the manufacturer should justify the chosen adjustment.
|
Withdrawn |
1976-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 4123:1979 |
Belt conveyors — Impact rings for carrying idlers and discs for return idlers — Main dimensions |
Establishes the main dimensions of impact rings for carrying idlers and discs for return idlers used for the various types of belt conveyors.
|
Published |
1979-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 4195-1:1987 |
Conveyor belts — Heat resistance — Part 1: Test method |
This part specifies a method for determining the relative level of heat resistance of belts. Because of the procedure requirements set, the tests can be carried out only if the cover thickness is equal to or greater than 4 mm. Belts may be classified according to three classes: class 1 - up to 100 C; class 2 - up to 125 C; class 3 - up to 150 C.
|
Withdrawn |
1987-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 4195-2:1988 |
Conveyor belts — Heat resistance — Part 2: Specifications |
Specifies the permissible variations of hardness, breaking elongation and strength of conveyor belt covers after exposure to heat as described in ISO 4195-1. Before and after exposure to heat under conditions defined in ISO 4195-1 there shall be measured: IRHD hardness of covers (according to ISO 48), breaking elongation and breaking strength of covers (according to ISO 37).
|
Withdrawn |
1988-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 4195:2007 |
Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods |
ISO 4195:2007 specifies requirements and test methods for the relative level of heat resistance of conveyor belt covers made of rubber. It gives the variations of hardness, elongation at break and tensile strength after exposure to heat. It is applicable only to those conveyor belts having a cover thickness greater than or equal to 4 mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1.
|
Withdrawn |
2007-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 4195:2007/Cor 1:2008 |
Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods — Technical Corrigendum 1 |
|
Withdrawn |
2008-01 |
Edition : 1 |
|
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 4195:2012 |
Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods |
ISO 4195:2012 specifies requirements and test methods for the relative level of heat resistance of conveyor belt covers made of rubber. It gives the permissible variations of hardness, elongation at break and tensile strength after exposure to heat. It is applicable only to those conveyor belts having a cover thickness greater than or equal to 4 mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1.
|
Published |
2012-11 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 4348:1983 |
Flat-top chains and associated chain wheels for conveyors |
This second edition cancels and replaces the first edition (i.e. ISO 4348:1978). Specifies characteristics of flat-top chains and associated chain wheels as used principally on conveyors for bottles. It covers dimensions, limits for interchangeability, measuring loads and minimum ultimate tensile loads.
|
Withdrawn |
1983-12 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 5284:1983 |
Conveyor belts — List of equivalent terms |
|
Withdrawn |
1983-06 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 3457:1979 |
Earth-moving machinery — Guards and shields — Definitions and specifications |
|
Withdrawn |
1979-09 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5284:1986 |
Conveyor belts — List of equivalent terms |
This second edition cancels and replaces the first edition (1983). Contains terms in English (in American, if different), French, German, Italian, Spanish, and Russian. The terms are listed in the alphabetical order of the english language. Alphabetical indexes for each language mentioned are also included.
|
Published |
1986-12 |
Edition : 2 |
Number of pages : 52 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.040.20
Components for conveyors
|
| ISO 5284:1986/Cor 1:2005 |
Conveyor belts — List of equivalent terms — Technical Corrigendum 1 |
|
Published |
2005-12 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.040.20
Components for conveyors
|
| ISO 5285:1978 |
Conveyor belts — Guide to storage and handling |
Provides a guide to the most suitable conditions for the storage and handling of belts. Four figures illustrate shapes and methods of lifting (figure 1: recommended method, figure 2: permissible method, figure 3: dangerous and unacceptable method, figure 4: method to be used with caution).
|
Withdrawn |
1978-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 5285:2004 |
Conveyor belts — Guidelines for storage and handling |
ISO 5285:2004 gives guidelines for creating the most suitable conditions for the storage and handling of conveyor belts. It is not applicable to light conveyor belts as described in EN 873.
|
Withdrawn |
2004-04 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 5285:2012 |
Conveyor belts — Guidelines for storage and handling |
ISO 5285:2012 gives guidelines for creating the most suitable conditions for the storage and handling of conveyor belts. It is not applicable to light conveyor belts, as described in ISO 21883-1.
|
Published |
2012-10 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 5293:1981 |
Conveyor belts — Formula for transition distance on three equal length idler rolls |
Specifies the formula to calculate conveyor belt transition distances. Tabulates the ratios of belt tension at transition to maximum rated belt tension from 1,0 to 0,05. Three figures illustrate shapes and reference quantities of concern. An annex gives the derivation of the formula for transition distance.
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 5293:2004 |
Conveyor belts — Determination of minimum transition distance on three idler rollers |
ISO 5293:2004 specifies the formula for calculating conveyor belt transition distances and details its application and derivation.
ISO 5293:2004 is not suitable or valid for light conveyor belts.
|
Published |
2004-09 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 5293:2004/Cor 1:2008 |
Conveyor belts — Determination of minimum transition distance on three idler rollers — Technical Corrigendum 1 |
|
Published |
2008-07 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 5612:1984 |
Mining — Scraper bars for chain conveyors |
|
Withdrawn |
1984-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 5612:1990 |
Mining — Scraper bars for chain conveyors |
This second edition cancels and replaces the first edition (1984). Specifies the requirements for a range of scraper bars for use in twin outboard chain assemblies made from chains complying with ISO 610 and associated shackle type connectors complying with ISO 1082. The figures illustrate shapes and reference quantities of concern. Tabulates the dimensions and strength rating of scraper bars.
|
Published |
1990-08 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 5613:1984 |
Mining — Drive sprocket assemblies for chain conveyors |
Specifies the requirements for a range of sprocket assemblies for use in twin outboard chain assemblies. These assemblies incorporate sprocket rings designed to accept chains complying with ISO 610, shackle type connectors complying with ISO 1082, and scraper bars complying with ISO 5612. It tabulates the dimensions and the figures illustrate shapes and reference quantities of concern. An annex gives design formulae.
|
Published |
1984-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 6973:1986 |
Drop-forged rivetless chains for conveyors |
Lays down the dimensions, tolerances, measuring loads and minimum breaking loads, for drop-forged rivetless chains suitable for conveying applications under a variety of conditions.
|
Published |
1986-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7590:2009 |
Steel cord conveyor belts — Methods for the determination of total thickness and cover thickness |
ISO 7590:2009 specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts.
Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement of both total belt thickness and cover thickness.
Method B (optical method) is recommended for the measurement of cover thickness only. It is not suitable if there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.
|
Withdrawn |
2009-01 |
Edition : 5 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7590:2018 |
Steel cord conveyor belts — Methods for the determination of total thickness and cover thickness |
This document specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts.
Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement of both total belt thickness and cover thickness.
Method B (optical method) is intended for the measurement of cover thickness only. It is not suitable if there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.
|
Published |
2018-05 |
Edition : 6 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7622-1:1984 |
Steel cord conveyor belts — Longitudinal traction test — Part 1: Measurement of elongation |
This part specifies a method for the determination of the elongation of steel cords constituting the carcase of conveyor belts, when subjected to a force corresponding to 10 % and to 60 % of the specified tensile strength. Applies exclusively to conveyor belts with a steel carcase.
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7622-1:2013 |
Steel cord conveyor belts — Longitudinal traction test — Part 1: Measurement of elongation |
ISO 7622-1:2013 specifies a method for the determination of the elongation of steel cords constituting the carcass of conveyor belts, when subjected to a force corresponding to 10 % and 60 % of the specified tensile strength.
It applies exclusively to conveyor belts with a steel carcass.
|
Published |
2013-05 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7622-2:1984 |
Steel cord conveyor belts — Longitudinal traction test — Part 2: Measurement of tensile strength |
This part specifies a method for the determination of the tensile strength, in the longitudinal direction, of conveyor belts with a steel carcase. Some figures illustrate shapes and reference quantities of concern. Applies exclusively to conveyor belts with a steel carcase.
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7622-2:2015 |
Steel cord conveyor belts — Longitudinal traction test — Part 2: Measurement of tensile strength |
ISO 7622-2:2015 specifies a method for the determination of the tensile strength, in the longitudinal, of steel cords constituting the carcass of conveyor belts.
It applies exclusively to conveyor belts with a steel carcass.
NOTE A method for the determination of elongation is specified in ISO 7622‑1.
|
Withdrawn |
2015-11 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7622-2:2022 |
Steel cord conveyor belts — Longitudinal traction test — Part 2: Measurement of tensile strength |
This document specifies a method for the determination of the tensile strength, in the longitudinal, of steel cords constituting the carcass of conveyor belts.
It applies exclusively to conveyor belts with a steel carcass.
NOTE A method for the determination of elongation is specified in ISO 7622‑1.
|
Published |
2022-06 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7623:1984 |
Steel cord conveyor belts — Cord-to-coating bond test |
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7623:1996 |
Steel cord conveyor belts — Cord-to-coating bond test — Initial test and after thermal treatment |
Provides a method for determining the bond strength of metal cords to their surrounding coating, either in the initial state or after thermal treatment. Replaces the first edition.
|
Withdrawn |
1996-05 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7623:2015 |
Steel cord conveyor belts — Cord-to-coating bond test — Initial test and after thermal treatment |
ISO 7623:2015 specifies a method for determining the bond strength of metal cords to their surrounding coating, either in the initial state or after thermal treatment.
It applies exclusively to metal-carcass conveyor belts.
|
Withdrawn |
2015-10 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 7623:2022 |
Steel cord conveyor belts — Cord-to-coating bond test — Initial test and after thermal treatment |
This document specifies a method for determining the bond strength of metal cords to their surrounding coating, either in the initial state or after thermal treatment.
It applies exclusively to metal-carcass conveyor belts.
|
Published |
2022-11 |
Edition : 4 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 8094:1984 |
Steel cord conveyor belts — Adhesion strength test of the cover to the core layer |
Specifies a test method for determing the adhesion strength of the cover to the core lyer. Applies exclusivily to steel cord conveyor belts. Describes the principle, the apparatus, the specimens, the procedure, and the expression of results; shows how to set up the test report. Some figures illustrate arrangements and reference quantities of concern.
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 8094:2013 |
Steel cord conveyor belts — Adhesion strength test of the cover to the core layer |
ISO 8094:2013 specifies a test method for determining the adhesion strength of the cover to the core layer. It applies exclusively to steel cord conveyor belts.
|
Published |
2013-05 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO/TR 8865:1990 |
Mining — Guidance on methods of verifying dimensions of sprocket assemblies for chain conveyors |
Gives guidance on methods of verifying sprocket dimensions specified in ISO 5613. Specifies those dimensions which should be measured to ensure compatibility between chain and sprocket.
|
Published |
1990-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 9856:1989 |
Conveyor belts — Determination of elastic modulus |
Specifies a method for determining the elastic modulus which is notably used in the calculation of transition distances in accordance with ISO 5293. Describes the principle, the apparatus, the test pieces, the procedure, and the expression of results; shows how to set report. A figure contains a graph of the variation of amplitude of the load as a function of elongation.
|
Withdrawn |
1989-06 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 9856:2003 |
Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic modulus |
ISO 9856:2003 specifies a method for determining the elastic and permanent elongation of a conveyor belt and the calculation of the elastic modulus. It is not applicable or valid for light conveyor belts as described in EN 873.
|
Withdrawn |
2003-12 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 9856:2003/Amd 1:2012 |
Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic modulus — Amendment 1 |
|
Withdrawn |
2012-07 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 9856:2016 |
Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic modulus |
ISO 9856:2016 specifies a method for determining the elastic and permanent elongation of a conveyor belt and the calculation of the elastic modulus.
It is not applicable or valid for light conveyor belts as described in ISO 21183‑1.
|
Published |
2016-10 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 10247:1990 |
Conveyor belts — Characteristics of covers — Classification |
Establishes the classification of covers for general purpose conveyor belts with textile or metal carcasses. Specifies the essential combinations of principal characteristics of belt covers and states the corresponding methods of determination.
|
Published |
1990-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 10247:1990/Amd 1:2006 |
Conveyor belts — Characteristics of covers — Classification — Amendment 1 |
|
Published |
2006-01 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO/TR 10357:1989 |
Conveyor belts — Formula for transition distance on three equal length idler rollers (new method) |
Specifies the formula to calculate conveyor belt transition distances. Tabulates the ratios of average belt tension at transition to maximum recommended belt joint tension from 1,5 TR to 0,05 TR against maximum belt edge tension for 1,3 RR to 2,7 TR. Three figures illustrate shapes and reference quantities of concern. Annex A gives the derivation of the formula for transition distance, and annex B includes the derivation of values of the induced belt edge stress at the transition.
|
Withdrawn |
1989-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 14890:2003 |
Conveyor belts — Specification for rubber or plastics covered conveyor belts of textile construction for general use |
ISO 14890:2003 specifies requirements for rubber and/or plastics covered conveyor belting of textile construction for general surface use on flat or troughed idlers. It is not suitable or valid for light conveyor belts as described in EN 873.
|
Withdrawn |
2003-05 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 14890:2003/Cor 1:2006 |
Conveyor belts — Specification for rubber or plastics covered conveyor belts of textile construction for general use — Technical Corrigendum 1 |
|
Withdrawn |
2006-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 14890:2013 |
Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for general use |
ISO 14890:2013 specifies requirements for rubber and/or plastics covered conveyor belting of textile construction for general surface use on flat or troughed idlers.
ISO 14890:2013 is not suitable or valid for light conveyor belts as described in ISO 21183-1.
Items that are not requirements of ISO 14890:2013, but need to be agreed between the manufacturer and the purchaser, as well as a list of the details intended to be supplied by the purchaser of belting with an enquiry are included in the annexes.
|
Published |
2013-02 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15147:1999 |
Light conveyor belts — Tolerances on widths and lengths of cut light conveyor belts |
|
Withdrawn |
1999-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15147:2012 |
Light conveyor belts — Tolerances on widths and lengths of cut light conveyor belts |
ISO 15147:2012 specifies methods for the measurement of widths and lengths of cut light conveyor belts as described in ISO 21183-1 and specifies the tolerances on the dimensions.
|
Published |
2012-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15236-1:2005 |
Steel cord conveyor belts — Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use |
ISO 15236-1:2005 specifies the performance and constructional requirements applicable to conveyor belts having steel cords in the longitudinal direction as reinforcement. The requirements for construction given in Clause 6 apply to the design of single belts as well as the design of complete type series such as those covered in ISO 15236-2.
|
Withdrawn |
2005-10 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15236-1:2016 |
Steel cord conveyor belts — Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use |
ISO 15236-1:2016 specifies the performance and constructional requirements applicable to conveyor belts having steel cords in the longitudinal direction as reinforcement. The requirements for construction given in Clause 6 apply to the design of single belts, as well as the design of complete type series such as those covered in ISO 15236‑2.
|
Published |
2016-10 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15236-2:2004 |
Steel cord conveyor belts — Part 2: Preferred belt types |
ISO 15236-2:2004 specifies preferred types of conveyor belts with steel cords in the longitudinal direction as reinforcement. The belt-type series in ISO 15236-2:2004 are based on the general requirements for construction given in ISO 15236-1.
|
Withdrawn |
2004-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15236-2:2017 |
Steel cord conveyor belts — Part 2: Preferred belt types |
ISO 15236-2:2017 specifies preferred types of conveyor belts with steel cords in the longitudinal direction as reinforcement. The belt type series in this document are based on the general requirements for construction given in ISO 15236‑1.
|
Published |
2017-01 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15236-3:2007 |
Steel cord conveyor belts — Part 3: Special safety requirements for belts for use in underground installations |
ISO 15236-3:2007 specifies the performance and constructional requirements applicable to conveyor belts for underground mining having steel cords in the longitudinal direction as reinforcement. The requirements for design and construction apply to the design of single belts as well as the design of complete type series such as those covered in ISO 15236-2.
Steel cord belts in accordance with ISO 15236-3:2007 are intended for use underground in coal mines and in other applications where the highest demands for safety against fire and explosion hazards have to be complied with.
|
Withdrawn |
2007-07 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15236-3:2017 |
Steel cord conveyor belts — Part 3: Special safety requirements for belts for use in underground installations |
ISO 15236-3:2017 specifies the performance and constructional requirements applicable to conveyor belts for underground mining having steel cords in the longitudinal direction as reinforcement. The requirements for design and construction apply to the design of single belts, as well as the design of complete type series such as those covered in ISO 15236‑2.
Steel cord belts in accordance with this document are intended for use underground in coal mines and in other applications where the highest demands for safety against fire and explosion hazards have to be complied with.
NOTE At present, the requirements can only be met by the use of compounds based on chloroprene rubber for the covers, as well as for the bonding rubber.
|
Published |
2017-03 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 15236-4:2004 |
Steel cord conveyor belts — Part 4: Vulcanized belt joints |
ISO 15236-4:2004 specifies design, dimensions, requirements and marking of vulcanized joints for steel cord conveyor belts.
|
Published |
2004-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 16851:2004 |
Textile conveyor belts — Determination of the net length of an endless (spliced) conveyor belt |
ISO 16851:2004 specifies a test method for determining the net length of an endless (spliced) conveyor belt.
It applies to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement. It is not suitable or valid for light conveyor belts as described in ISO 21183-1.
|
Withdrawn |
2004-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 16851:2012 |
Textile conveyor belts — Determination of the net length of an endless (spliced) conveyor belt |
ISO 16851:2012 specifies a method for determining the net length of an endless (spliced) conveyor belt.
It applies to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement. It is not suitable or valid for light conveyor belts described in ISO 21183-1.
|
Published |
2012-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 18573:2003 |
Conveyor belts — Test atmospheres and conditioning periods |
ISO 18573:2003 specifies the temperature, humidity and time conditions used for the conditioning and testing of all types of conveyor belt, irrespective of whether they have plastics or rubber covers. It also specifies the requirements for the time interval to be observed between production and testing of conveyor belt test pieces.
Special conditions applicable to a particular test or material or simulating a particular climatic environment are not included.
|
Withdrawn |
2003-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 18573:2012 |
Conveyor belts — Test atmospheres and conditioning periods |
ISO 18573:2012 specifies the temperature, humidity and time conditions used for the conditioning and testing of all types of conveyor belt, irrespective of whether they have plastics or rubber covers. It also specifies the requirements for the time interval to be observed between production and testing of conveyor belt test pieces.
Special conditions applicable to a particular test or material or simulating a particular climatic environment are not included.
|
Published |
2012-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 20238:2018 |
Conveyor belts — Drum friction testing |
ISO 20238:2018 specifies a method of testing to determine the propensity of a conveyor belt to generate heat flame or glow when held stationary, under a given tension, in surface contact around a rotating driven steel drum.
ISO 20238:2018 describes means of varying the conveyor belt tension.
NOTE For conveyor belts containing steel reinforcement, it may not be possible to conduct this test in full due to the inability of the conveyor belt to comply with the requirements of 7.2. In this case, premature termination according to 7.3 can be necessary.
|
Published |
2018-01 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 21180:2013 |
Light conveyor belts — Determination of the maximum tensile strength |
|
Published |
2013-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 21181:2013 |
Light conveyor belts — Determination of the relaxed elastic modulus |
ISo 21181:2013 specifies a test method for the determination of the relaxed elastic modulus of light conveyor belts according to ISO 21183-1 or other conveyor belts where ISO 9856 is not applicable.
|
Published |
2013-02 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 21183-1:2005 |
Light conveyor belts — Part 1: Principal characteristics and applications |
ISO 21183-1:2005 describes the principal characteristics and applications of light conveyor belts. This description is necessary either for limiting the validity of certain standards to light conveyor belts or for excluding light conveyor belts from the validity of certain standards.
|
Published |
2005-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 21183-2:2005 |
Light conveyor belts — Part 2: List of equivalent terms |
ISO 21183-2:2005 establishes a list of equivalent terms relating to light conveyor belts.
|
Withdrawn |
2005-11 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.040.20
Components for conveyors
|
| ISO 21183-2:2018 |
Light conveyor belts — Part 2: List of equivalent terms |
This document establishes a list of equivalent terms relating to light conveyor belts.
NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this document gives the equivalent terms in German, Spanish, Italian and Japanese; these are published under the responsibility of the member bodies for Germany (DIN), Spain (AENOR), Italy (UNI) and Japanese (JISC). However, only the terms given in the official languages can be considered as ISO terms.
|
Published |
2018-11 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
01.040.53
Materials handling equipment (Vocabularies)
;
53.040.20
Components for conveyors
|
| ISO 834-1:1999/Amd 2:2021 |
Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 2 |
|
Published |
2021-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.220.50
Fire-resistance of building materials and elements
|
| ISO 22721:2007 |
Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining |
ISO 22721:2007 specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183‑1. ISO 22721:2007 does not include requirements for plastics covers.
|
Published |
2007-07 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO/FDIS 22721 |
Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining |
ISO 22721:2007 specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183‑1. ISO 22721:2007 does not include requirements for plastics covers.
|
Under development |
|
Edition : 2 |
|
Technical Committee |
53.040.20
Components for conveyors
;
73.100.40
Haulage and hoisting equipment
|
| ISO 23586:2022 |
Conveyor belts — Indentation rolling resistance related to belt width — Requirements and testing |
This document defines a method for the determination of the width-related indentation rolling resistance of conveyor belts. The goal is to be a full-scale test and simulation on finished belt constructions which are reproducible and relevant for the practical use. The test results can be used for a comparison of conveyor belts and for design of belt conveyors with steel cord and fabric conveyor belts.
This document is not suitable or valid for light conveyor belts described in ISO 21183‑1.
|
Published |
2022-11 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
53.040.20
Components for conveyors
|
| ISO 36:1999 |
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabric |
|
Withdrawn |
1999-11 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
83.060
Rubber
;
59.080.40
Coated fabrics
|
| ISO 36:2005 |
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics |
ISO 36:2005 specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together.
The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces.
The method does not apply to coated fabrics or textile conveyor belts.
|
Withdrawn |
2005-10 |
Edition : 4 |
Number of pages : 4 |
Technical Committee |
83.060
Rubber
;
59.080.40
Coated fabrics
|
| ISO 36:2011 |
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics |
ISO 36:2011 specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together.
The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces.
The method does not apply to coated fabrics or textile conveyor belts.
|
Withdrawn |
2011-09 |
Edition : 5 |
Number of pages : 7 |
Technical Committee |
83.060
Rubber
;
59.080.40
Coated fabrics
|
| ISO 36:2017 |
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics |
ISO 36:2017 specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together.
The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces.
ISO 36:2017 does not apply to coated fabrics, which are tested in accordance with ISO 2411, or textile conveyor belts, which are tested in accordance with ISO 252.
|
Withdrawn |
2017-05 |
Edition : 6 |
Number of pages : 8 |
Technical Committee |
83.060
Rubber
;
59.080.40
Coated fabrics
|
| ISO 36:2020 |
Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics |
This document specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together.
The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces.
This document does not apply to coated fabrics, which are tested in accordance with ISO 2411, or textile conveyor belts, which are tested in accordance with ISO 252.
|
Published |
2020-03 |
Edition : 7 |
Number of pages : 8 |
Technical Committee |
83.060
Rubber
;
59.080.40
Coated fabrics
|
| ISO 1419:1995 |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests |
Cancels and replaces the first edition (1977). Describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing: Method A: Loss of volatiles on heating of plasticized-PVC-coated fabrics; Method B: General method; Method C: Tropical test; Method D: Ageing test for nitrocellulose-type coatings.
|
Withdrawn |
1995-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
59.080.40
Coated fabrics
|
| ISO 1419:2018 |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests |
This document describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing.
|
Withdrawn |
2018-08 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
59.080.40
Coated fabrics
|
| ISO 1419:2019 |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests |
This document describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing.
|
Published |
2019-05 |
Edition : 4 |
Number of pages : 6 |
Technical Committee |
59.080.40
Coated fabrics
|
| ISO 1420:1978 |
Rubber or plastics coated fabric — Determination of resistance to penetration by water |
|
Withdrawn |
1978-09 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
59.080.40
Coated fabrics
|
| ISO 1420:1987 |
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water |
For determining the degree of penetration by water test pieces cut from coated fabrics are subjet to known hydrostatic pressures. Tests may be conducted on the coated fabric as received or on test pieces which have been subjected to ageing or other tests. Time intervals between manufacturing and testing are given. Constitutes technical revision of the first edition (ISO 1420:1978)
|
Withdrawn |
1987-11 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
59.080.40
Coated fabrics
|