| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4209-1:1988 |
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
|
Withdrawn |
1988-12 |
Edition : 4 |
Number of pages : 11 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 10256:2003 |
Head and face protection for use in ice hockey |
ISO 10256:2003 specifies performance requirements and test methods for head and face protection for use in ice hockey.
Perfarmance requirements and test methods, where appropriate, are given for the following: construction; shock absorption; puck-impact resistance; penetration; retention-system properties; field of vision; marking and information.
The head and face protection is intended for use by players, goalkeepers and certain functionaries (e.g. referees).
|
Withdrawn |
2003-09 |
Edition : 2 |
Number of pages : 48 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO 10257:1996 |
Face protectors and visors for ice hockey players |
|
Withdrawn |
1996-10 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO/CD 11999-5 |
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/CD 11999-9 |
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 9: Fire hoods |
ISO 11999-9:2016 specifies the minimum design and performance requirements for a fire hood as part of personal protective equipment (PPE) to be used by firefighters, primarily but not solely to protect against exposure to flame and high thermal loads.
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12311:2013 |
Personal protective equipment — Test methods for sunglasses and related eyewear |
ISO 12311:2012 specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.
Other test methods may be used if shown to be equivalent.
|
Published |
2013-08 |
Edition : 1 |
Number of pages : 85 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/DIS 12311 |
Personal protective equipment — Test methods for sunglasses and related eyewear |
|
Deleted |
|
Edition : 2 |
Number of pages : 15 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12312-1:2013 |
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use |
ISO 12312-1:2012 is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation.
|
Withdrawn |
2013-08 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12312-1:2013/Amd 1:2015 |
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use — Amendment 1 |
|
Withdrawn |
2015-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12312-1:2022 |
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use |
This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation.
Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources;
b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts));
c) sunglasses that have been medically prescribed for attenuating solar radiation;
d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies;
e) products intended for occupational eye protection – see, for example, ISO16321 (all parts).
|
Published |
2022-06 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12312-2:2015 |
Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun |
ISO 12312-2:2015 applies to all afocal (plano power) products intended for direct observation of the sun, such as solar eclipse viewing.
ISO 12312-2:2015 does not apply to the following:
a) afocal (plano power) sunglasses and clip-ons for general use intended for protection against solar radiation;
b) eyewear for protection against radiation from artificial light sources, such as those used in solaria;
c) eye protectors specifically intended for sports (e.g. ski goggles or other types);
d) sunglasses that have been medically prescribed for attenuating solar radiation;
e) prescription sunglass lenses.
|
Published |
2015-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 13091-1:2001 |
Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 1: Methods of measurement at the fingertips |
|
Published |
2001-05 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 12312-3:2022 |
Eye and face protection — Sunglasses and related eyewear — Part 3: Sunglasses for running, cycling and similar active lifestyles |
This document is applicable to all nominally afocal (plano power) sunglasses for protection against environmental elements, such as solar radiation, wind, dust and rain when running, cycling and following similar active lifestyle recreational activities but not intended for competitive sporting activities where enhanced impact resistance is required.
The document specifies additional material, design, performance and marking requirements. The other applicable requirements are given in ISO 12312‑1.
This type of sunglass is designed to reduce secondary hazards to the wearer in an accident rather than to provide high amounts of impact protection which may be difficult in a spectacle format.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources, such as those used in solaria;
b) eye protectors intended for specific sports, e.g. ski goggles or other types – see ISO18527 (all parts);
c) eye protectors for sports that include the use of a ball, stick, bat, racquet or other implement;
d) sunglasses that have been medically prescribed for attenuating solar radiation;
e) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies;
f) products intended for occupational eye protection – for example, see ISO16321 (all parts).
|
Published |
2022-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12609-1:2013 |
Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 1: Specification for products |
ISO 12609-1:2013 specifies performance and labelling of eye protectors used for ILS equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation.
ISO 12609-1:2013 provides a specification for an eye protector expected to cope with the majority of applications. A more rigorous procedure for determining appropriate eye protection against spectral outputs from ILS equipment is described in the annexes.
|
Withdrawn |
2013-07 |
Edition : 1 |
Number of pages : 30 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12609-1:2021 |
Eye and face protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 1: Specification for products |
This document specifies general requirements for operators' eye protectors for intense light source (ILS) equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation.
This document is applicable to devices intended for patient protection during ILS procedures, except for treatment in the periorbital area. For guidance on patient eye protection during ILS procedures, see ISO/TR 22463.
For guidance on the use and selection of ILS eye protectors, see ISO 12609-2.
This document does not apply to:
— laser protectors, for which ISO 19818-1 applies;
— protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions;
— protectors specifically intended for protection against only solar radiation and used in non-occupational environments for which the ISO 12312 (all parts) applies;
— protectors used with tanning equipment;
— protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.
|
Published |
2021-10 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 12609-2:2013 |
Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 2: Guidance for use |
ISO 12609-2:2013 gives guidance and information to users, manufacturers, suppliers, and safety advisors on the selection and use of eye protectors for intense light source (ILS) equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation.
ISO 12609-2:2013 provides guidance on selection of an eye protector expected to cope with the majority of applications and a more rigorous procedure for determining appropriate eye protection against spectral outputs from ILS equipment.
|
Published |
2013-07 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 16073-5:2019 |
Wildland firefighting personal protective equipment — Requirements and test methods — Part 5: Helmets |
This document specifies the minimum performance requirements and methods of test for helmets used for wildland firefighting.
This document covers the general design of wildland firefighting helmets, the minimum levels of performance for the materials employed and the methods of test used. The personal protection equipment (PPE) is not intended to provide protection during fire entrapment.
This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538).
Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in this document. Users are directed to those relevant standards for the requirements associated with such protection.
|
Published |
2019-12 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.20
Head protective equipment
|
| ISO 13091-1:2001/Amd 1:2010 |
Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 1: Methods of measurement at the fingertips — Amendment 1 |
|
Published |
2010-05 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 16073-7:2019 |
Wildland firefighting personal protective equipment — Requirements and test methods — Part 7: Face and eye protection |
This document specifies the minimum performance requirements and methods of test for personal protective equipment (PPE) face and eye protection, for wildland firefighting.
This document covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. This PPE is not intended to provide protection during fire entrapment.
This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538).
Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in this document. Users are directed to those relevant standards for the requirements associated with such protection.
|
Published |
2019-11 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.20
Head protective equipment
|
| ISO 16073-8:2019 |
Wildland firefighting personal protective equipment — Requirements and test methods — Part 8: Hearing |
This document specifies the minimum performance requirements and methods of test for hearing protection used when wildland firefighting.
This document covers the general design of the personal protective equipment (PPE), the minimum levels of performance for the materials employed and the methods of test used. The PPE is not intended to provide protection during fire entrapment.
This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538).
Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in this document. Users are directed to those relevant standards for the requirements associated with such protection.
|
Published |
2019-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.20
Head protective equipment
|
| ISO 16073-9:2020 |
Wildland firefighting personal protective equipment — Requirements and test methods — Part 9: Firehoods |
This document specifies the minimum performance requirements and methods of test for firehoods that cover the head and neck and are used for wildland firefighting. An optional requirement has been included to provide limited protection against particulate contaminants
This document covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. This PPE is not intended to provide protection during fire entrapment.
This document does not cover firehoods for structural firefighting (see ISO 11999‑9). This document only applies in situations when compatible protective clothing, helmet, and when necessary respiratory protection devices are also worn.
|
Published |
2020-08 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
13.220.10
Fire-fighting
;
13.340.20
Head protective equipment
|
| ISO 16321-1:2021 |
Eye and face protection for occupational use — Part 1: General requirements |
This document specifies general requirements for eye and face protectors. These protectors are intended to provide protection for the eyes and faces of persons against one or more common occupational hazards such as impacts from flying particles and fragments, optical radiation, dusts, splashing liquids, molten metals, heat, flame, hot solids, harmful gases, vapours and aerosols.
Additional requirements for eye and face protectors used during welding and related techniques and for mesh protectors are given in ISO 16321-2 and ISO 16321-3, respectively.
This document applies to:
— all plano as well as corrective and prescription lensed protectors and components;
— those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself";
— those eye and face protectors used in educational establishments.
This document does not apply to:
— protectors specifically intended for protection against only solar radiation and used in non- occupational environments for which the ISO 12312 series applies;
— protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions;
— patient eye protectors during diagnosis or treatment (e.g. ISO/TR 22463);
— protectors for use during medical or e.g. aesthetic applications, e.g. intense light sources (ILS) for which the ISO 12609 series applies;
— protectors specifically intended for sports for which the ISO 18527 series applies;
— laser protectors;
— face protectors intended for live-working to protect against short-circuit electric arcs for which IEC 62819 applies;
— protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 16321-1:2021/DAmd 1 |
Eye and face protection for occupational use — Part 1: General requirements — Amendment 1 |
|
Under development |
|
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 16321-2:2021 |
Eye and face protection for occupational use — Part 2: Additional requirements for protectors used during welding and related techniques |
This document specifies additional material, design, performance and marking requirements for eye and face protectors designed to provide protection for the eyes and faces of persons against occupational hazards, such as optical radiation, impacts from flying particles and fragments, and hot solids during welding and related techniques. The other applicable requirements for welding protectors are given in ISO 16321‑1.
This document also applies to welding protectors used in educational establishments.
This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself".
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 13091-1:2001/Amd 2:2021 |
Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 1: Methods of measurement at the fingertips — Amendment 2 |
|
Published |
2021-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 16321-3:2021 |
Eye and face protection for occupational use — Part 3: Additional requirements for mesh protectors |
This document specifies additional performance and marking requirements for mesh protectors designed to provide protection for the eyes and faces of persons against mechanical hazards such as impacts from flying particles and fragments. The other applicable requirements for mesh protectors and the frames/mountings to which they are intended to be fitted are given in ISO 16321‑1.
This document also applies to mesh protectors used in educational establishments.
This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do‑it‑yourself".
This document is not applicable to protectors for use against liquid splash (including molten metal), hot solid risks, infrared and ultraviolet radiation. For protection against these hazards suitable additional or alternative protectors according ISO 16321‑1 will be needed.
This document does not apply to mesh protectors used in sports such as fencing.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/CD 16321-4 |
Eye and face protection for occupational use — Part 4: Additional requirements for protection against biological hazards |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 18526-1:2020 |
Eye and face protection — Test methods — Part 1: Geometrical optical properties |
This document specifies the reference test methods for determining the spherical, cylindrical, and prismatic refractive power properties of unmounted and mounted plano lenses (non-corrective lenses) for eye and face protectors.
This document does not apply to any eye and face protection product requirement standards for which other test methods are specified.
Other test methods can be used provided they have been shown to be equivalent and include uncertainties of measurement no greater than those required by the reference method.
|
Published |
2020-03 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 18526-2:2020 |
Eye and face protection — Test methods — Part 2: Physical optical properties |
This document specifies the reference test methods for determining the physical optical properties of personal eye and face protectors.
This document does not apply to any eye and face protection products for which the requirements standard(s) specifies other test methods.
Other test methods can be used provided they have been shown to be equivalent and include uncertainties of measurement no greater than those required of the reference method.
|
Published |
2020-02 |
Edition : 1 |
Number of pages : 77 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 18526-3:2020 |
Eye and face protection — Test methods — Part 3: Physical and mechanical properties |
This document specifies the reference test methods for determining the physical and mechanical properties of eye and face protectors.
This document does not apply to any eye and face protection products for which the requirements standard(s) specifies other test methods.
Other test methods can be used if shown to be equivalent and include uncertainties of measurement no greater than those required of the reference method.
|
Published |
2020-01 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 18526-4:2020 |
Eye and face protection — Test methods — Part 4: Headforms |
This document specifies the dimensions and tolerances of the headforms used for the testing of eye and face protectors.
Additional information is given for:
— anthropometric measurement methods;
— anthropometric data for head and face dimensions;
— human test panels.
|
Published |
2020-02 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 18527-1:2021 |
Eye and face protection for sports use — Part 1: Requirements for downhill skiing and snowboarding goggles |
This document applies to all goggles with plano lenses, intended for eye protection against hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding and other similar activities.
This document applies to downhill skiing and snowboarding goggles fitted with an insert to carry prescription lenses.
It specifies requirements and testing for materials, performance, marking of goggles and information to be supplied by the manufacturer.
Information on the selection and use of downhill skiing and snowboarding goggles is given in Annex A.
This document does not apply to
a) eye protectors for protection when operating or travelling on a motorized vehicle,
b) eye protectors for protection against optical radiation from artificial sources, such as those used in solaria,
c) eye protectors for direct observation of the sun, and
d) eye protectors intended for sports with unrelated hazards and risks.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO 5007:1990 |
Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration |
This first edition cancels and replaces the first edition of the Technical Report ISO/TR 5007:1980. Specifies a method for measuring and evaluating the effectiveness of the seat in reducing the vertical whole-body vibration transmitted to the operator of an tractor. Applies to seats fitted to tractors within specified classes, each class being defined as a group of tractors having similar vibration characteristics (table 2).
|
Withdrawn |
1990-02 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 18527-2:2021 |
Eye and face protection for sports use — Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 |
This document applies to all eye protectors intended for eye protection against hazards during playing or instructing in the sports of squash, racquetball and squash 57 and sports with similar hazards and no greater risks. It applies to eye protectors that incorporate prescription lenses but has no specific tests for eye protectors designed for use over spectacles.
It specifies requirements and testing for materials, performance, marking of eye protectors and information to be supplied by the manufacturer.
Information on the selection and use of eye protectors for squash, racquetball and squash 57 is given in Annex A.
This document does not apply to
a) sports eye protectors designed for use over prescription spectacles,
b) eye protectors for other occupational applications,
c) eye protectors without lenses,
d) eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks than squash, racquetball and squash 57, and
e) eye protectors with gradient-tinted lenses because they are not appropriate for squash, racquetball or squash 57.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.30
Indoor sports equipment
;
97.220.40
Outdoor and water sports equipment
|
| ISO 18527-3:2020 |
Eye and face protection for sports use — Part 3: Requirements and test methods for eyewear intended to be used for surface swimming |
This document specifies requirements and test methods for eyewear intended for surface swimming only. It contains requirements for eyewear for both recreational and specialist competitive swimming. It deals with materials, construction, optical properties and test methods.
Requirements for the labelling and marking of swimming eyewear and for information to be supplied by the manufacturer are also specified.
Eyewear intended for surface swimming conforming to the requirements of this standard are suitable for surface use and shallow diving only, e.g. from the edge of a pool, and are not suitable for wear when diving from a high board.
This document applies to eyewear that include
a) non-prescription nominally plano or afocal lenses,
b) non-prescription mass-produced corrective lenses, and
c) prescription lenses.
|
Published |
2020-10 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.30
Indoor sports equipment
;
97.220.40
Outdoor and water sports equipment
|
| ISO 18639-5:2018 |
PPE ensembles for firefighters undertaking specific rescue activities — Part 5: Helmet |
This document provides the principles that govern the development of incident type and/or hazard specific test methods and minimum performance requirements for helmets for firefighters while engaged in specific rescue activities.
Helmets related to specific rescue activities, such as road traffic crash (RTC) and urban search and rescue (USAR), are documented in individual subclauses of this document.
NOTE Further guidance can be found in ISO 18639-1.
The purpose of this document is to ensure that minimum performance requirements for incident type and/or hazard specific helmets are designated.
This document covers general helmet design, the minimum performance level of the materials used and the methods of test for determining this performance level.
It does not cover special helmets for use in other high risk situations such as firefighting.
This document does not cover protection for the torso, arms, legs and feet or protection of the hands against other hazards, e.g. chemical, biological, radiation and electrical hazards, except for limited, accidental exposure to fire ground chemicals and contaminated blood or body fluids.
Selection of the appropriate system of personal protective equipment, (PPE), including helmets, is dependent on carrying out an effective risk assessment which identifies the hazard to be faced, evaluates the likelihood of those hazards and provides the means of reducing or eliminating these hazards.
|
Published |
2018-11 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 19734:2021 |
Eye and face protection — Guidance on selection, use and maintenance |
This document gives guidance to specifiers and users on the control of eye and face hazards including physical, mechanical, chemical, optical radiation and biological and on the selection, use and maintenance of eye and face protectors.
This document applies to
— occupational use,
— tasks that are performed similarly to those in an occupation but not in the workplace, e.g. "do-it-yourself", and
— schools, educational and research establishments.
This document does not apply to eye and face protection for
— ionizing radiation,
— low frequency radio waves,
— microwaves,
— sports or vehicular usage, and
— sunglasses for general (not occupational) use ? see ISO 12312-1.
NOTE The ISO 18527 (all parts) sets requirements for eye protectors for some sports.
Brief advice on protection when using lasers is included but for detailed advice, see IEC/TR 60825-14.
This document is neither a whole nor partial substitute for risk assessment, which is an essential part of any eye and face protection programme.
Although this document has been written to help specifiers and users, any recommendations in this document are to be interpreted as guidance only and not intended to replace any national regulatory requirements. Risk assessment is the sole responsibility of the employer and not the PPE manufacturer or its authorised representative.
|
Published |
2021-02 |
Edition : 1 |
Number of pages : 50 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/TR 5007:1980 |
Agricultural wheeled tractors — Operator seat — Measurement of transmitted vibration |
|
Withdrawn |
1980-11 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 15572:1998 |
Guide for estimating uncertainties in dosimetry for radiation processing |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
17.240
Radiation measurements
|
| ISO 19818-1:2021 |
Eye and face protection — Protection against laser radiation — Part 1: Requirements and test methods |
This document is applicable to protectors intended to provide protection against accidental exposure to laser radiation within the wavelength range 180 nm to 1 mm. It specifies the requirements, test methods and marking. Protectors intended for adjustment work on lasers are included in the scope of this document and are marked in the same way as other protectors, but selection of appropriate eyewear for a specific application is a choice of the user. Laser protective filters used as viewing windows in laser equipment machinery or incorporated into optical instruments such as operating microscopes and loupes that may be used for deliberate viewing of laser radiation as part of their function are outside the scope of this document.
Laser radiation in the wavelength range below 180 nm is absorbed in air, therefore eye and face protection should not be required.
This document is applicable to devices intended for patient protection during medical laser procedures except for treatment in the periorbital area. Guidance on eye protectors for patients (including those used for periorbital treatment) is given in ISO/TR 22463.
|
Published |
2021-06 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 21924-4:2017 |
Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors |
ISO 21924-4:2017 specifies additional requirements and test methods for head protectors without face protection used in unarmed martial arts, such as taekwondo, karate, kick-boxing and similar disciplines.
ISO 21924-4:2017 also applies to head protectors used in boxing.
|
Published |
2017-11 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.01
Sports equipment and facilities in general
|
| ISO 21924-9:2020 |
Martial arts — Protective equipment for martial arts — Part 9: Additional requirements and test methods for Wushu Sanda head protectors |
This document specifies the terms and definitions, product structure, classification, requirements and test methods of head protectors for Wushu Sanda.
This document is applicable to Wushu Sanda head protectors sewn with polyurethane (PU) synthetic leather, polyvinyl chloride (PVC) artificial leather, foamed plastic products and other materials.
|
Published |
2020-01 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.01
Sports equipment and facilities in general
|
| ISO/TR 22463:2019 |
Patient and client eye protectors for use during laser or intense light source (ILS) procedures — Guidance |
This document gives guidelines for and provides information to employers, users and safety advisors on the selection and use of patient eye protectors (PEPs) for lasers and intense light source (ILS) equipment used for medical and cosmetic applications.
This document does not apply to the eye protection of laser/ILS operators or users of the equipment. It also does not apply to PEPs for use with tanning equipment or ophthalmic instruments, either for the user/operator or the patient/client.
|
Published |
2019-04 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 2329:1983 |
Fork lift trucks — Fork arms — Dimensions |
|
Withdrawn |
1983-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO/TR 2329:1977 |
Withdrawal of ISO/TR 2329-1977 |
|
Withdrawn |
1977-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-1:1985 |
Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
|
Withdrawn |
1985-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-1:1997 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
|
Published |
1997-05 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-1:1997/Amd 1:2010 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements — Amendment 1 |
|
Published |
2010-07 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-2:1989 |
Evaluation of human exposure to whole-body vibration — Part 2: Continuous and shock-induced vibrations in buildings (1 to 80 Hz) |
General guidance is given on human response to building vibrations. Includes weighting curves of frequency response for equal annoyance of humans together with measurement methods to be used. Is concerned only with tactile perception and does not take into account auditory perception of radiated sound.
|
Withdrawn |
1989-02 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 5982:1981 |
Vibration and shock — Mechanical driving point impedance of the human body |
Definies the mechanical characteristics of the body in the form of whole body mechanical input impedance. Information is restricted to the frequency range from 0,5 to 30 Hz and for a limited number of body positions.
|
Withdrawn |
1981-08 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-2:2003 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
ISO 2631-2:2003 concerns human exposure to whole-body vibration and shock in buildings with respect to the comfort and annoyance of the occupants. It specifies a method for measurement and evaluation, comprising the determination of the measurement direction and measurement location. It defines the frequency weighting Wm which is applicable in the frequency range 1 Hz to 80 Hz where the posture of an occupant does not need to be defined.
Whilst it is often the case that a building will be available for experimental investigation, many of the concepts contained within ISO 2631-2 would apply equally to a building in the design process or where it will not be possible to gain access to an existing building. In these cases, reliance will have to be placed on the prediction of the building response by some means.
ISO 2631-2 does not provide guidance on the likelihood of structural damage, which is discussed in ISO 4866. Further, it is not applicable to the evaluation of effects on human health and safety.
Acceptable magnitudes of vibration are not stated in ISO 2631-2.
The mathematical definition of the frequency weighting Wm is given in Annex A. Guidelines for collecting data concerning complaints about building vibration are given in Annex B.
|
Published |
2003-04 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-3:1985 |
Evaluation of human exposure to whole-body vibration — Part 3: Evaluation of exposure to whole-body z-axis vertical vibration in the frequency range 0,1 to 0,63 Hz |
|
Withdrawn |
1985-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-4:2001 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
This part of ISO 2631 provides guidance on the application of ISO 2631-1 to the evaluation of the effects of
mechanical vibration on the comfort of passengers and crew in fixed-guideway systems. It is intended to be used
by organizations which purchase, specify or use fixed-guideway systems, to help them to understand the
relationship between the design of the guideway as well as other features of the system and the comfort of
passengers and crew. These guidelines establish methods for the evaluation of relative comfort between systems,
as opposed to absolute levels of comfort.
This part of ISO 2631 is applicable to people in normal health exposed to rectilinear vibration along their x-, y- and
z-axes, as well as rotational vibration about these (body-centred) axes. It is intended to provide guidance on the
assessment of comfort as a function of motions along and about vehicle axes that produce the body motions. This
part of ISO 2631 is not applicable to high-amplitude single transients which may cause trauma, such as those
resulting from vehicle accidents or "run-ins" produced by "longitudinal slack action", nor is it applicable to highamplitude
vibration which may affect health.
For the purposes of this part of ISO 2631, fixed-guideway passenger systems include rail systems (heavy and light
rail), magnetically levitated (MAGLEV) systems and rubber tyre metro-type systems, as well as any of the system
types listed above that incorporate a tilt capability to compensate for lateral acceleration when traversing curves.
This part of ISO 2631 provides guidance on the effects of very low-frequency accelerations (0,1 Hz to 0,5 Hz)
experienced as vertical forces that may cause kinetosis. These forces may be caused by combinations of curve
transition, super-elevation and tilt-body technology. However, this part of ISO 2631 is not intended to give guidance
on comfort implications of very low-frequency accelerations (below 0,5 Hz) experienced as lateral or longitudinal
forces. Such accelerations can be generated by guideway geometry (horizontal alignment and cant).
This part of ISO 2631 gives guidance on the evaluation of ride comfort based on motion environment only.
|
Published |
2001-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-4:2001/Amd 1:2010 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems — Amendment 1 |
|
Published |
2010-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-5:2004 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 5: Method for evaluation of vibration containing multiple shocks |
ISO 2631-5:2004 addresses human exposure to mechanical multiple shocks measured at the seat pad when a person is seated.
The adverse health effects of prolonged exposure to vibration that includes multiple shocks are related to dose measures. The method described in ISO 2631-5:2004 is generally applicable in cases where adverse health effects in the lumbar spine are concerned.
The calculation of the lumbar spine response described ISO 2631-5:2004 assumes that the person subjected to the vibration is seated in an upright position and does not voluntarily rise from the seat during the exposure. Different postures can result in different responses in the spine.
|
Withdrawn |
2004-02 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631-5:2018 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 5: Method for evaluation of vibration containing multiple shocks |
This document addresses human exposure to multiple mechanical shocks, and it formulates requirements for the measurement of multiple shocks. The results of these measurements are then analyzed to provide information for the assessment of the risk of adverse health effects to the vertebral end-plates of the lumbar spine for seated individuals due to compression. Other injuries could develop even when there is no injury to the end plate.
NOTE 1 Multiple mechanical shocks are shocks of different magnitude and shape that occur frequently at regular and irregular intervals during the measurement period.
NOTE 2 As proposed in the annexes, the assessment of the current injury risk is based on measured representative exposures in combination with the individual exposure history. Prospective risks can be assessed by anticipated exposure durations. Manufacturers of measurement equipment are encouraged to develop a possibility for an on-site evaluation of the exposure.
Two exposure regimes are distinguished in this document: one for severe conditions and one for less severe conditions.
NOTE 3 Clause 4 contains the delineation of the two regimes.
This document is applicable for unweighted vertical accelerations that have peak values up to 137,3 m/s2 (14 g) measured at the seat-occupant interface beneath the ischial tuberosities over a 0,01 Hz to 80 Hz measurement bandwidth.
NOTE 4 The measurement bandwith is defined in 5.1.
Caution is necessary when applying the method to severe exposures, particularly since peak accelerations of 137,3 m/s2 (14 g) are close to the physical limit that a spine can tolerate.
|
Published |
2018-07 |
Edition : 2 |
Number of pages : 33 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 2631:1978 |
Guide for the evaluation of human exposure to whole-body vibration |
|
Withdrawn |
1978-01 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 5007:2003 |
Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration |
ISO 5007:2003 specifies, in accordance with ISO 10326-1, a laboratory method for measuring and evaluating the effectiveness of the suspension of operator seats on agricultural wheeled tractors. It also specifies acceptance criteria based on the test results, while defining the input spectral classes relating to three classes of agricultural tractor with rubber tyres, unsprung rear axles and no low-frequency cab isolation -- those of up to 3 600 kg (class 1), those of from 3 600 kg to 6 500 kg (class 2), and those of over 6 500 kg (class 3) -- each of which defines a group of machines having similar vibration characteristics.
The method tests the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator at frequencies of from 1 Hz to 20 Hz. It is not applicable to vibration reaching the operator other than through the seat (e.g. that sensed by the operator's feet on the platform or control pedals or hands on the steering wheel).
|
Published |
2003-03 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.10
Agricultural tractors and trailed vehicles
|
| ISO 5008:1979 |
Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator |
Specifies methods for measuring and reporting the vibration to which the operator of an tractor or other field machine is exposed. The operating conditions of the machine and the ordinates of optional artificial test tracks are also included. Applies when measurements are made under field conditions or where artificial surfaces are used foe the comparison of different models of particular machines.
|
Withdrawn |
1979-04 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.01
Agricultural machines and equipment in general
|
| ISO 5008:2002 |
Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator |
ISO 5008 specifies methods for measuring and reporting the whole body vibration to which the operator of an agricultural wheeled tractor or other field machine is exposed when operating on a standard test track. The operating conditions of the machine and the ordinates of the artificial test tracks are also included.
This International Standard does not include assessment of vibration reaching the operator other than through his/her seat or foot platform (e.g., vibration that is sensed by the feet through the controls or by the hands through the steering wheel is not considered).
The purpose of ISO 5008 is to define the specification of instruments, measurement procedures, measurement site characteristics and frequency weighting that will allow the whole body vibration of agricultural wheeled tractors and field machinery to be made and reported with acceptable precision.
|
Published |
2002-07 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.01
Agricultural machines and equipment in general
|
| ISO 5008:2002/Cor 1:2005 |
Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator — Technical Corrigendum 1 |
|
Published |
2005-11 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.01
Agricultural machines and equipment in general
|
| ISO 5349-1:2001 |
Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 1: General requirements |
|
Published |
2001-05 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 5349-2:2001 |
Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace |
|
Published |
2001-08 |
Edition : 1 |
Number of pages : 39 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 5349-2:2001/Amd 1:2015 |
Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace — Amendment 1 |
|
Published |
2015-07 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 5349:1986 |
Mechanical vibration — Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration |
|
Withdrawn |
1986-05 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 5805:1981 |
Mechanical vibration and shock affecting man — Vocabulary |
|
Withdrawn |
1981-10 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
01.040.13
Environment. Health protection. Safety (Vocabularies)
|
| ISO 5805:1997 |
Mechanical vibration and shock — Human exposure — Vocabulary |
|
Published |
1997-05 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 3448:1992/Cor 1:1993 |
Industrial liquid lubricants — ISO viscosity classification — Technical Corrigendum 1 |
|
Published |
1993-10 |
Edition : 2 |
|
Technical Committee |
75.100
Lubricants, industrial oils and related products
|
| ISO 5982:2019 |
Mechanical vibration and shock — Range of idealized values to characterize human biodynamic response under whole-body vibration |
This document describes the range of idealized values of the apparent mass modulus and phase applicable to seated individuals with and without a back support subjected to x-, y- and z‑axis sinusoidal or broad-band random vibration and to standing individuals subjected to z‑axis sinusoidal or broad-band random vibration under specific experimental conditions. Additionally, this document describes the range of idealized values of seat-to-head transmissibility modulus and phase applicable to seated individuals without a back support subjected to z‑axis sinusoidal or broad-band random vibration.
The ranges of idealized values defined in this document are considered to be valid for subjects on a rigid seat (or standing on a rigid platform for z-axis only), with feet supported and vibrated. The range of idealized seat-to-head transmissibility values is considered to be applicable also to the condition with the feet hanging freely. For seated individuals subjected to sinusoidal or broad-band random vibration, the apparent mass values are defined over the frequency range of 0,5 Hz to 10 Hz for the x‑axis and y‑axis, and over the frequency range of 0,5 Hz to 20 Hz for the z‑axis. The frequency and amplitude characteristics of the vibration fall within the range for which most vibration exposure is likely to predominate while driving vehicles such as agricultural tractors, earth-moving machinery and fork-lift trucks. Application to automobiles is not covered by this document in view of the lack of a meaningful database for conditions involving posture and vibration excitation levels most likely associated with car driving.
The upper and lower values of modulus and phase defined at each frequency for each of the biodynamic response functions considered represent the range of most probable or idealized values. The middle values represent overall weighted means of the human data and define the target values for general applications. Such applications can involve the development of mechanical analogues for laboratory seat testing, or of functions to correct for the human interface when representing the body as a rigid mass, or the development of analytical human body models to be used for whole-body vibration exposure estimations or for seat and cushion design optimization.
|
Published |
2019-03 |
Edition : 3 |
Number of pages : 44 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 6897:1984 |
Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shore structures, to low-frequency horizontal motion (0,063 to 1 Hz) |
Relates to typical responses of people. The recommendations are categorized according to the use and to the nature of work being carried out. Does not deal with the injury of people due to structural vibration. Guidance on satisfactory magnitudes of vibrations for specific situations is given in the annex.
|
Published |
1984-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 7096:1982 |
Earth-moving machinery — Operator seat — Transmitted vibration |
|
Withdrawn |
1982-02 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
53.100
Earth-moving machinery
|
| ISO 7096:1994 |
Earth-moving machinery — Laboratory evaluation of operator seat vibration |
|
Withdrawn |
1994-09 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
53.100
Earth-moving machinery
|
| ISO 7096:2000 |
Earth-moving machinery — Laboratory evaluation of operator seat vibration |
|
Withdrawn |
2000-03 |
Edition : 3 |
Number of pages : 21 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
53.100
Earth-moving machinery
|
| ISO 7096:2020 |
Earth-moving machinery — Laboratory evaluation of operator seat vibration |
1.1 This document specifies, in accordance with ISO 10326‑1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines.
1.2 This document is applicable to operator seats used on earth-moving machines as defined in ISO 6165.
1.3 This document defines the input spectral classes required for the following earth-moving machines. Each class defines a group of machines having similar vibration characteristics:
— rigid-frame dumpers >4 500 kg operating mass;
— articulated-frame dumpers;
— scrapers without axle or frame suspension[1];
— wheeled loaders >4 500 kg operating mass;
— graders;
— wheeled dozers;
— soil compactors;
— backhoe loaders;
— crawler dumpers;
— crawler loaders;
— crawler-dozers ≤50 000 kg operating mass[2];
— compact dumpers ≤4 500 kg operating mass;
— wheeled compact loaders ≤4 500 kg operating mass;
— skid-steer loaders, wheeled ≤4 500 kg and tracked ≤6 000 kg operating mass.
1.4 The following machines impart sufficiently low vertical vibration inputs at frequencies between 1 Hz and 20 Hz to the seat during operation that these seats do not require suspension for the attenuation of transmitted vibration:
— excavators, including walking excavators and cable excavators[3];
— trenchers;
— landfill compactors;
— non-vibratory rollers, except soil compactors;
— vibratory rollers, except soil compactors;
— pipelayers;
— horizontal directional drills (HDD).
1.5 The tests and criteria defined in this document are intended for operator seats used in earth-moving machines of conventional design.
NOTE Other tests can be appropriate for machines with design features that result in significantly different vibration characteristics.
1.6 Vibration which reaches the operator other than through the seat, for example that sensed by the operator's feet on the platform or control pedals or by the operator´s hands on the steering-wheel, is not covered.
[1] For scrapers with suspension, either a seat with no suspension can be used, or one having a suspension with high damping.
[2] For crawler dozers greater than 50 000 kg, the seat performance requirements are suitably provided by a cushion type seat.
[3] For excavators, the predominant vibration is generally in the fore and aft (X) axis.
|
Published |
2020-02 |
Edition : 4 |
Number of pages : 23 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
53.100
Earth-moving machinery
|
| ISO 7505:1986 |
Forestry machinery — Chain saws — Measurement of hand-transmitted vibration |
Specifies general methods for data acquisition and processing concerning vibrations induced by chain saws. The methods are valid irrespective of how the chain saw is operated during the test. Figures illustrate the meaning of the description. An annex contains the frequency range and weigthing filter.
|
Withdrawn |
1986-05 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.80
Forestry equipment
|
| ISO 7916:1989 |
Forestry machinery — Portable brush-saws — Measurement of hand-transmitted vibration |
Specifies general methods for data acquisition and processing concerning vibrations induced by combustion engine brush-saws. The methods are valid irrespective of how the brush-saw is operated during the test. Figurtes illustrate the meaning of the description. Annex A contains the frequency range and weighting filter. Annex B gives the bibliography.
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
65.060.80
Forestry equipment
|
| ISO 8041-1:2017 |
Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters |
ISO 8041-1:2017 specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requirements for pattern evaluation, or validation, periodic verification and in situ checks, and the specification of vibration calibrators for in situ checks.
Vibration instruments specified in this document can be single instruments, combinations of instrumentation or computer-based acquisition and analysis systems.
Vibration instruments specified in this document are intended to measure vibration for one or more applications, such as the following:
- hand-transmitted vibration (see ISO 5349‑1);
- whole-body vibration (see ISO 2631‑1, ISO 2631‑2 and ISO 2631‑4);
- low-frequency whole-body vibration in the frequency range from 0,1 Hz to 0,5 Hz (see ISO 2631‑1).
Vibration instruments can be designed for measurement according to one or more of the frequency weightings defined within each of these applications.
Three levels of performance testing are defined in this document:
a) pattern evaluation or validation:
pattern evaluation, i.e. a full test of the instrument against the specifications defined in this document;
validation of one-off instruments, i.e. a limited set of tests of an individual vibration measuring system against the relevant specifications defined in this document;
b) periodic verification, i.e. an intermediate set of tests designed to ensure that an instrument remains within the required performance specification;
c) in situ checks, i.e. a minimum level of testing required to indicate that an instrument is likely to be functioning within the required performance specification.
|
Published |
2017-05 |
Edition : 1 |
Number of pages : 106 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 8041-2:2021 |
Human response to vibration — Measuring instrumentation — Part 2: Personal vibration exposure meters |
This document specifies minimum requirements for personal vibration exposure meters (PVEM).
This document is applicable to instruments designed for measurements of whole-body vibration in the context of industrial hygiene applications (according to ISO 2631-1, ISO 2631-2 and ISO 2631-4) and/or hand-arm vibration (according to ISO 5349-1) together with the associated exposure times.
This document provides specified design goals and permitted tolerances that define the minimum performance capabilities and functional requirements of instruments designed to measure personal daily vibration exposure.
This document does not apply to instruments designed to measure or log exposure times without also performing vibration measurement. Instrumentation of this type is described in ISO/TR 19664.
|
Published |
2021-05 |
Edition : 1 |
Number of pages : 53 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 8041:1990 |
Human response to vibration — Measuring instrumentation |
|
Withdrawn |
1990-07 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 8041:1990/Amd 1:1999 |
Human response to vibration — Measuring instrumentation — Amendment 1 |
|
Withdrawn |
1999-11 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 8041:1990/Cor 1:1993 |
Human response to vibration — Measuring instrumentation — Technical Corrigendum 1 |
Amends Foreword, subclauses 3.3.2, 4.3.2, 9.2, D.1, D.2, replaces figure D.1.
|
Withdrawn |
1993-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 8041:2005 |
Human response to vibration — Measuring instrumentation |
ISO 8041:2005 specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requirements for pattern evaluation, periodic verification and in-situ checks, and the specification of vibration calibrators for in-situ checks.
Vibration instruments specified in ISO 8041:2005 can be single instruments, combinations of instrumentation or computer-based acquisition and analysis systems.
Three levels of performance testing are defined in ISO 8041:2005: pattern evaluation, i.e. a full test of the instrument against the specifications defined in this International Standard; periodic verification, i.e. an intermediate set of tests designed to ensure that an instrument remains within the required performance specification, and in-situ checks, i.e. a minimum level of testing required to indicate that an instrument is likely to be functioning within the required performance specification.
|
Withdrawn |
2005-04 |
Edition : 2 |
Number of pages : 91 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 8041:2005/Cor 1:2007 |
Human response to vibration — Measuring instrumentation — Technical Corrigendum 1 |
|
Withdrawn |
2007-11 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|
| ISO 8662-1:1988 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 1: General |
Specifies the type test methods for the laboratory measurement of vibrations in the handles of tools. nThis part describes thebasic requirements for evaluating vibrations; it is not intended for assessment of human to vibrations.
|
Withdrawn |
1988-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-2:1992 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 2: Chipping hammers and riveting hammers |
Supplements ISO 8662-1 and describes a type test procedure for establishing the magnitude of vibration in the handle of chipping hammers and riveting hammers. The power tools covered may be electrically, pneumatically or hydraulically driven, or driven by means of an internal combustion engine. Annex A gives a definition of the basicentric coordinate system, Annex B a model test report.
|
Withdrawn |
1992-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 3498:1979 |
Lubricants for machine tools — Classification |
|
Withdrawn |
1979-04 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
75.100
Lubricants, industrial oils and related products
|
| ISO 8662-3:1992 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 3: Rock drills and rotary hammers |
Supplements ISO 8662-1 and describes a type test procedure for establishing the magnitude of vibration in the handle of rock drills and rotary hammers. The power tools covered may be electrically, pneumatically or hydraulically driven, or driven by means of an internal combustion engine. Annex A gives a definition of the basicentric coordinate system, Annex B a model test report.
|
Withdrawn |
1992-07 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-3:1992/Amd 1:1999 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 3: Rock drills and rotary hammers — Amendment 1 |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-4:1994 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 4: Grinders |
The method specified is a laboratory type-test procedure for establishing the magnitude of vibration in the handle of a power tool fitted with a specified test wheel. Applies to power tools that may be pneumatically driven or driven by other means. It is intended that the results be used to compare different models of the same type of power tool, i.e. power tools intended for use with the same grinding wheel (same diameter and same maximum peripheral speed).
|
Withdrawn |
1994-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-5:1992 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 5: Pavement breakers and hammers for construction work |
Supplements ISO 8662-1 and describes a type test procedure for establishing the magnitude of vibration in the handle of a pavement breaker or hammer operating under a specified load. The power tools covered may be electrically, pneumatically or hydraulically driven, or driven by means of an internal combustion engine. Annex A gives a definition of the basicentric coordinate system, Annex B a model test report.
|
Withdrawn |
1992-07 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-5:1992/Amd 1:1999 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 5: Pavement breakers and hammers for construction work — Amendment 1 |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-6:1994 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 6: Impact drills |
Specifies a laboratory method of measuring the vibrations occurring at the handles of hand-held power driven impact drills. It is a type test procedure for establishing the magnitude of vibrations at the handles of impact drills operating under a specified load. It is intended that the results can be used to compare different power tools or different models of the same type of power tool.
|
Withdrawn |
1994-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-7:1997 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
|
Withdrawn |
1997-06 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-8:1997 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 8: Polishers and rotary, orbital and random orbital sanders |
|
Withdrawn |
1997-08 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-9:1996 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 9: Rammers |
Describes a laboratory method of measuring the vibrations at the handles of hand-held power rammers used in foundries, on building sites etc.. Establishes the magnitude of vibrations at the handles when operating on the specified load.
|
Withdrawn |
1996-11 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-10:1998 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 10: Nibblers and shears |
|
Withdrawn |
1998-10 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-11:1999 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 11: Fastener driving tools |
This part of ISO 8662 specifies a laboratory method for measuring the single-event vibration at the handle of
fastener driving tools, where a single event is a mechanical shock or a series of individual shocks at intervals longer
than 0,2 s. It is a type test procedure for establishing the vibration value in the handle of a hand-held power tool
operating under a specified load.
NOTE Fastener driving tools are also referred to as nailers, pinners, tackers and staplers.
For fastener driving tools to which this part of ISO 8662 is applicable, the power required for operation can be
supplied by pneumatic or hydraulic pressure, combustible gases in an internal combustion engine or from spring
tension. The fastener driving tools may be actuated by single actuation, contact actuation or continuous actuation.
This part of ISO 8662 is applicable to fasteners comprising nails, staples, pins, corrugated fasteners, screws used
as nails, dowels, sleeves, cable collars and base supports.
It is intended that the results of application of this part of ISO 8662 be used for comparing different models of the
same type of power tool.
|
Withdrawn |
1999-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-11:1999/Amd 1:2001 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 11: Fastener driving tools — Amendment 1 |
|
Withdrawn |
2001-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-12:1997 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action |
|
Withdrawn |
1997-08 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|
| ISO 8662-13:1997 |
Hand-held portable power tools — Measurement of vibrations at the handle — Part 13: Die grinders |
|
Withdrawn |
1997-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
25.140.10
Pneumatic tools
|