| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 389-3:2016 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators |
ISO 389-1:2016 specifies the following data applicable to the calibration of bone vibrators for pure-tone bone-conduction audiometry:
a) reference equivalent threshold vibratory force levels (RETVFL), corresponding to the threshold of hearing of young otologically normal persons by bone-conduction audiometry;
b) essential characteristics of the bone vibrator and the method of coupling to the test subject, and to the mechanical coupler;
c) essential characteristics of the masking noise and the baseline masking noise level applied to the ear not under test.
Guidance on the practical application of this part of ISO 389 in the calibration of audiometers is given in Annex B.
RETVFL is the vibratory force level transmitted to a mechanical coupler of specified characteristics by a vibrator when applied to the mechanical coupler under stated conditions of test and when energized at the voltage level corresponding to the normal threshold of hearing for location on the mastoid prominence.
NOTE 1 Values for the differences in reference equivalent threshold vibratory force levels between location on the forehead and mastoid are included for information in Annex C.
NOTE 2 Recommended procedures for carrying out bone-conduction audiometry are specified in ISO 8253‑1.
|
Published |
2016-02 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-4:1994 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 4: Reference levels for narrow-band masking noise |
Specifies reference levels for narrow-band masking noise presented by air conduction from an earphone in pure-tone audiometry. The data are given in terms of levels to be added to the reference equivalent threshold sound pressure levels for the corresponding pure-tone frequencies. Data are given for noise bandwidths of one-third and one-half octaves.
|
Published |
1994-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-5:2006 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz |
ISO 389-5:2006 specifies reference equivalent threshold sound pressure levels (RETSPLs) of pure tones in the frequency range from 8 kHz to 16 kHz applicable to the calibration of air conduction audiometers for specific earphones.
|
Published |
2006-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/TR 389-5:1998 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz |
|
Withdrawn |
1998-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-6:2007 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 6: Reference threshold of hearing for test signals of short duration |
ISO 389-6:2007 specifies reference hearing threshold levels for tests signals of short duration applicable to the calibration of audiometric equipment where such signals are used.
|
Published |
2007-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-7:1996 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions |
Specifies a reference threshold of hearing for the calibration of audiometric equipment used under definite conditions. The listeners are otologically normal persons in the age from 18 to 25 years inclusive. The data are given in numerical form for the preferred frequencies in the one-third-octave series from 20 Hz to 16 000 Hz in accordance with ISO 266.
|
Withdrawn |
1996-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-7:2005 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions |
ISO 389-7:2005 specifies a reference threshold of hearing for the calibration of audiometric equipment used under the following conditions.
The sound field in the absence of the listener consists of either a free progressive plane wave (free field) or a diffuse sound field, as specified in ISO 8253-2. In the case of a free field, the source of sound is directly in front of the listener (frontal incidence).The sound signals are pure (sinusoidal) tones in the case of free-field conditions and one-third octave bands of (white or pink) noise in the case of diffuse-field conditions.The sound pressure level is measured in the absence of the listener at the position where the centre of the listener's head would be.Listening is binaural.
The data in ISO 389-7:2005 are given in numerical form for the preferred frequencies in the one-third octave series from 20 Hz to 16 000 Hz inclusive in accordance with ISO 266 and, in addition, for some intermediate audiometric frequencies up to 18 000 Hz.
The threshold data differ from the audiometric zero specified in ISO 389-1, ISO 389-2, ISO/TR 389-5 and ISO 389-8, since the latter refer to monaural listening through earphones with sound pressure levels referred to specified couplers and ear simulators. Direct comparison between the data in the parts of ISO 389 mentioned above and that in ISO 389-7:2005 is therefore not appropriate.
|
Withdrawn |
2005-11 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 10819:2013/Amd 2:2021 |
Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand — Amendment 2 |
|
Published |
2021-08 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
;
13.340.40
Hand and arm protection
|
| ISO 389-7:2019 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions |
This document specifies a reference threshold of hearing for the calibration of audiometric equipment used under the following conditions.
a) The sound field in the absence of the listener consists of either a free progressive plane wave (free field) or a diffuse sound field, as specified in ISO 8253‑2. In the case of a free field, the source of sound is directly in front of the listener (frontal incidence).
b) The sound signals are pure (sinusoidal) tones in the case of free-field conditions and one-third-octave bands of (white or pink) noise in the case of diffuse-field conditions.
c) The sound pressure level is measured in the absence of the listener at the position where the centre of the listener's head would be.
d) Listening is binaural.
NOTE 1 Correction values for the threshold of hearing under free-field listening conditions and selected angles of sound incidence (45° and 90°) deviating from frontal incidence are given in ISO 8253-2 for information.
NOTE 2 Other conditions are given in Reference [1].
The data are given in numerical form for the preferred frequencies in the one-third-octave series from 20 Hz to 16 000 Hz inclusive in accordance with ISO 266 and, in addition, for some intermediate audiometric frequencies up to 18 000 Hz.
The threshold data differ from the audiometric zero specified in ISO 389‑1, ISO 389‑2, ISO 389‑5 and ISO 389‑8, since the latter refer to monaural listening through earphones with sound pressure levels referred to specified couplers and ear simulators. Direct comparison between the data in the parts of ISO 389 mentioned above and in this document is therefore not appropriate.
|
Published |
2019-10 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-8:2004 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones |
ISO 389-8:2004 specifies reference equivalent threshold sound pressure levels (RETSPLs) for pure tones in the frequency range from 125 Hz to 8 kHz, applicable to the calibration of air conduction audiometers equipped with a particular model of circumaural earphones (SENNHEISER HDA 200).
Some notes and references on the derivation and the test conditions used to determine the recommended reference levels are given in Annex A and the Bibliography.
The sound attenuation of the earphone is given in Annex B. For speech audiometers of types A-E and B-E, the correction figures of the earphone for a free-field equivalent output are given in Annex C.
|
Published |
2004-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389-9:2009 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 9: Preferred test conditions for the determination of reference hearing threshold levels |
ISO 389-9:2009 specifies test conditions for determining the hearing thresholds of subjects for the purpose of establishing standardized values for reference hearing threshold levels.
|
Published |
2009-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389:1975 |
Acoustics — Reference zero for the calibration of audiometric equipment |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389:1975/Add 1:1983 |
Acoustics — Reference zero for the calibration of audiometric equipment — Addendum 1 |
|
Withdrawn |
1983-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389:1975/Add 2:1986 |
Acoustics — Reference zero for the calibration of audiometric equipment — Addendum 2 |
|
Withdrawn |
1986-12 |
Edition : 1 |
|
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389:1985 |
Acoustics — Standard reference zero for the calibration of pure tone air conduction audiometers |
|
Withdrawn |
1985-03 |
Edition : 2 |
|
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 389:1991 |
Acoustics — Standard reference zero for the calibration of pure-tone air conduction audiometers |
|
Withdrawn |
1991-03 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 454:1975 |
Acoustics — Relation between sound pressure levels of narrow bands of noise in a diffuse field and in a frontally-incident free field for equal loudness |
|
Withdrawn |
1975-01 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1996-1:1982 |
Acoustics — Description and measurement of environmental noise — Part 1: Basic quantities and procedures |
Defines basic measures to be used for the description of noise in communitiy environments and describes basic methods for the determination or these measures. Does not specify noise limits.
|
Withdrawn |
1982-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 7029:2017 |
Acoustics — Statistical distribution of hearing thresholds related to age and gender |
ISO 7029:2017 provides descriptive statistics of the hearing threshold deviation for populations of otologically normal persons of various ages under monaural earphone listening conditions. It specifies the following, for populations within the age limits from 18 years to 80 years for the range of audiometric frequencies from 125 Hz to 8 000 Hz:
a) the expected median value of hearing thresholds given relative to the median hearing threshold at the age of 18 years;
b) the expected statistical distribution above and below the median value.
For the frequencies from 3 000 Hz to 8 000 Hz, the median and statistical distribution for populations above 70 years are presented for information only.
ISO 7029:2017 also provides for information the expected median values at audiometric frequencies from 9 000 Hz to 12 500 Hz within the age limits from 22 years to 80 years.
|
Published |
2017-01 |
Edition : 3 |
Number of pages : 22 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1996-1:2003 |
Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures |
ISO 1996-1:2003 defines the basic quantities to be used for the description of noise in community environments and describes basic assessment procedures. It also specifies methods to assess environmental noise and gives guidance on predicting the potential annoyance response of a community to long-term exposure from various types of environmental noises. The sound sources can be separate or in various combinations. Application of the method to predict annoyance response is limited to areas where people reside and to related long-term land uses.
Community response to noise can vary differently among sound sources that are observed to have the same acoustic levels. ISO 1996-1 describes adjustments for sounds that have different characteristics. The term rating level is used to describe physical sound predictions or measurements to which one or more adjustments have been added. On the basis of these rating levels, the long-term community response can be estimated.
The sounds are assessed either singly or in combination, allowing for consideration, when deemed necessary by responsible authorities, of the special characteristics of their impulsiveness, tonality and low-frequency content, and for the different characteristics of road traffic noise, other forms of transportation noise (such as aircraft noise) and industrial noise.
ISO 1996-1 does not specify limits for environmental noise.
|
Withdrawn |
2003-08 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1996-1:2016 |
Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures |
ISO 1996-1:2016 defines the basic quantities to be used for the description of noise in community environments and describes basic assessment procedures. It also specifies methods to assess environmental noise and gives guidance on predicting the potential annoyance response of a community to long-term exposure from various types of environmental noises. The sound sources can be separate or in various combinations. Application of the method to predict annoyance response is limited to areas where people reside and to related long-term land uses.
Community response to noise can vary differently among sound sources that are observed to have the same acoustic levels. This part of ISO 1996 describes adjustments for sounds that have different characteristics. The term "rating level" is used to describe physical sound predictions or measurements to which one or more adjustments have been added. On the basis of these rating levels, the long-term community response can be estimated.
The sounds are assessed either singly or in combination, allowing for consideration, when deemed necessary by responsible authorities, of the special characteristics of their impulsiveness, tonality, and low-frequency content, and for the different characteristics of road-traffic noise, other forms of transportation noise (such as aircraft noise), and industrial noise.
ISO 1996-1:2016 does not specify limits for environmental noise.
NOTE 1 In acoustics, several different physical measures describing sound can have their level expressed in decibels (e.g. sound pressure, maximum sound pressure, and equivalent continuous sound pressure). The levels corresponding to these physical measures normally will differ for the same sound. This often leads to confusion. Therefore, it is necessary to specify the underlying physical quantity (e.g. sound pressure level, maximum sound pressure level, and equivalent continuous sound pressure level).
NOTE 2 In this part of ISO 1996, quantities are expressed as levels in decibels. However, some countries validly express the underlying physical quantity, such as maximum sound pressure, in pascal or sound exposure in pascal-squared seconds.
NOTE 3 ISO 1996‑2 deals with the determination of sound pressure levels.
|
Published |
2016-03 |
Edition : 3 |
Number of pages : 47 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1996-2:1987 |
Acoustics — Description and measurement of environmental noise — Part 2: Acquisition of data pertinent to land use |
Describes methods for measuring and describing noise of the environment relevant to a specified area, existing or planned. Does not give guidance on the estimation of the overall uncertainty of the results. Noes not specify noise limits.
|
Withdrawn |
1987-04 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1996-2:1987/Amd 1:1998 |
Acoustics — Description and measurement of environmental noise — Part 2: Acquisition of data pertinent to land use — Amendment 1 |
|
Withdrawn |
1998-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1996-2:2007 |
Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental noise levels |
ISO 1996-2:2007 describes how sound pressure levels can be determined by direct measurement, by extrapolation of measurement results by means of calculation, or exclusively by calculation, intended as a basis for assessing environmental noise. Recommendations are given regarding preferable conditions for measurement or calculation to be applied in cases where other regulations do not apply.
ISO 1996-2:2007 can be used to measure with any frequency weighting or in any frequency band. Guidance is given to evaluate the uncertainty of the result of a noise assessment.
|
Withdrawn |
2007-03 |
Edition : 2 |
Number of pages : 40 |
Technical Committee |
13.140
Noise with respect to human beings
;
17.140.01
Acoustic measurements and noise abatement in general
|
| ISO 1996-2:2017 |
Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels |
ISO 1996-2:2017 describes how sound pressure levels intended as a basis for assessing environmental noise limits or comparison of scenarios in spatial studies can be determined. Determination can be done by direct measurement and by extrapolation of measurement results by means of calculation. This document is primarily intended to be used outdoors but some guidance is given for indoor measurements as well. It is flexible and to a large extent, the user determines the measurement effort and, accordingly, the measurement uncertainty, which is determined and reported in each case. Thus, no limits for allowable maximum uncertainty are set up. Often, the measurement results are combined with calculations to correct for reference operating or propagation conditions different from those during the actual measurement. This document can be applied on all kinds of environmental noise sources, such as road and rail traffic noise, aircraft noise and industrial noise.
|
Published |
2017-07 |
Edition : 3 |
Number of pages : 60 |
Technical Committee |
13.140
Noise with respect to human beings
;
17.140.01
Acoustic measurements and noise abatement in general
|
| ISO 4000-1:2001 |
Passenger car tyres and rims — Part 1: Tyres (metric series) |
|
Withdrawn |
2001-12 |
Edition : 7 |
Number of pages : 34 |
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO/PAS 1996-3:2022 |
Acoustics — Description, measurement and assessment of environmental noise — Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of L Aeq |
This method objectively categorises sources by determination of the prominence of impulsive sound, with the aim of correlating to community response. This method for measuring the prominence of impulsive sounds is intended for sources not identified as gunfire or high-energy impulsive sound. It typically produces adjustments in the range 0,0 dB to 9,0 dB. These adjustments are intended to be used to categorise the sources as either regular impulsive or highly impulsive sound sources and apply the penalty indicated in ISO 1996-1. However, the adjustments may be applied directly, as is done in NT ACOU 112[2], and BS 4142[3]. ISO 1996-2 provides additional guidance for performing these measurements.
The method is intended for use on sources with impulsive characteristics that are not already categorised in ISO 1996-1. A non-exhaustive list of examples includes compressed air release, scrap handling, goods delivery, fork lifts with rattling forks, skateboard ramps, industrial shearing, gas discharges, percussive tools in demolition, powered riveting, etc.
The method is not intended for use on sounds from firearms. Although the measurements of prominence may give relevant results, research has shown the response to these sources is influenced by factors outside of the scope of this document. In addition, the method is not intended to use for high-energy impulsive sound sources as specified in ISO 1996-1.
NOTE This method is not intended for occupational hearing loss, which is outside the scope of this document.
See Annex A for recommended additional research.
|
Published |
2022-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.140
Noise with respect to human beings
;
17.140.01
Acoustic measurements and noise abatement in general
|
| ISO/R 1996:1971 |
Withdrawal of ISO/R 1996-1971 |
|
Withdrawn |
1971-05 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1999:1975 |
Acoustics — Assessment of occupational noise exposure for hearing conservation purposes |
|
Withdrawn |
1975-08 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1999:1990 |
Acoustics — Determination of occupational noise exposure and estimation of noise-induced hearing impairment |
Prescribes a practical relation for these quanitities expressed as A-weighted noise level in dB and duration of exposure within a normal working week (40 hours) and the percentage of personnel that is to be expected to obtain a raised hearing threshold of 25 dB or more as a result of this exposure, averaged from 500, 1000 and 2000 Hz.
|
Withdrawn |
1990-01 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 1999:2013 |
Acoustics — Estimation of noise-induced hearing loss |
ISO 1999:2013 specifies a method for calculating the expected noise-induced permanent threshold shift in the hearing threshold levels of adult populations due to various levels and durations of noise exposure; it provides the basis for calculating hearing disability according to various formulae when the hearing threshold levels at commonly measured audiometric frequencies, or combinations of such frequencies, exceed a certain value.
The measure of exposure to noise for a population at risk is the noise exposure level normalized to a nominal 8 h working day, LEX,8h, for a given number of years of exposure. ISO 1999:2013 applies to noise at frequencies less than approximately 10 kHz which is steady, intermittent, fluctuating, irregular. Use of ISO 1999:2013 for sound pressures exceeding 200 Pa (140 dB relative to 20 µPa) is recognized as extrapolation.
|
Published |
2013-10 |
Edition : 3 |
Number of pages : 23 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/CD 1999 |
Acoustics — Estimation of noise-induced hearing loss |
See Annex.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 2204:1979 |
Acoustics — Guide to International Standards on the measurement of airborne acoustical noise and evaluation of its effects on human beings |
|
Withdrawn |
1979-11 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/TR 3352:1974 |
Acoustics — Assessment of noise with respect to its effect on the intelligibility of speech |
Describes a practical survey method for assessment of the influence of noise on sentence intelligibility in direct communication. Describes a simplified method for the estimation of the maximum distance between speaker and listener as a function of the charakteristics of the noise.
|
Withdrawn |
1974-02 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/DIS 4678 |
Ships and marine technology — Noise measurement method for HVAC system in accommodation spaces |
|
Under development |
|
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.140
Noise with respect to human beings
;
47.020.90
Marine ventilation, air conditioning and heating systems
|
| ISO/TR 4870:1991 |
Acoustics — The construction and calibration of speech intelligibility tests |
Describes: a) the methods for the construction of speech tests for the measurement of the intelligibility of transmitted speech; b) a reference communication system and the necessary test conditions.
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 6189:1983 |
Acoustics — Pure tone air conduction threshold audiometry for hearing conservation purposes |
Specifies procedures and requirements without masking that are applicable to individuals whose hearing sensiticity might be adversely affected by occupational noise exposure and presents techniques for automatic recording and manual audiometry.
|
Withdrawn |
1983-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 8253-2:1992 |
Acoustics — Audiometric test methods — Part 2: Sound field audiometry with pure tone and narrow-band test signals |
Specifies relevant test signal characteristics, requirements for free, diffuse and quasi-free sound fields, and procedures for sound field audiometry using pure tones, frequency modulated tones or other narrow-band test signals presented by one or more loudspeakers, primarily for the purpose of determining hearing threshold levels in the frequency range from 125 Hz to 12 500 Hz. The purpose is to ensure that tests of hearing give as high a degree of accuracy and reproducibility as possible.
|
Withdrawn |
1992-11 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 8253-2:2009 |
Acoustics — Audiometric test methods — Part 2: Sound field audiometry with pure-tone and narrow-band test signals |
ISO 8253-2:2009 specifies relevant test signal characteristics, requirements for free, diffuse, and quasi‑free sound fields, and procedures for sound field audiometry using pure tones, frequency-modulated tones or other narrow-band test signals presented by means of one or more loudspeakers. The primary purpose is the determination of hearing threshold levels in the frequency range 125 Hz to 8 000 Hz, but this range can be extended to 20 Hz to 16 000 Hz.
ISO 8253-2:2009 does not include specifications for the use of hand-held loudspeakers. Speech as a test signal is not covered.
The purpose of ISO 8253-2:2009 is to ensure that tests of hearing, using sound field audiometry, give as high a degree of accuracy and reproducibility as possible.
Examples of graphical representations of the results are given.
|
Published |
2009-12 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 8253-3:1996 |
Acoustics — Audiometric test methods — Part 3: Speech audiometry |
Procedures and requirements for speech audiometry with the recorded test material being presented by air conduction through an earphone, by bone conduction through a bone vibrator or from a loudspeaker for sound field audiometry. It also contains requirements on recorded speech material and recommended procedures for the maintenance and calibration of speech audiometric equipment.
|
Withdrawn |
1996-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 8253-3:2012 |
Acoustics — Audiometric test methods — Part 3: Speech audiometry |
ISO 8253-3:2012 specifies basic methods for speech recognition tests for audiological applications.
In order to ensure minimum requirements of precision and comparability between different test procedures including speech recognition tests in different languages, ISO 8253-3:2012 specifies requirements for the composition, validation and evaluation of speech test materials, and the realization of speech recognition tests. ISO 8253-3:2012 does not specify the contents of the speech material because of the variety of languages.
Furthermore, ISO 8253-3:2012 also specifies the determination of reference values and fulfilment requirements for the realization and manner of presentation.
ISO 8253-3:2012 specifies procedures and requirements for speech audiometry with the recorded test material being presented by air conduction through an earphone, or from a loudspeaker for sound field audiometry. Methods for using noise either for masking the non-test ear or as a competing sound are described.
Some test subjects, for example children, can require amended test procedures not specified in ISO 8253-3:2012.
Specialized tests such as those used for evaluating directional hearing and dichotic hearing are outside the scope of ISO 8253-3:2012.
|
Withdrawn |
2012-03 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 8253-3:2022 |
Acoustics — Audiometric test methods — Part 3: Speech audiometry |
This document specifies basic methods for speech recognition tests for audiological applications.
NOTE Examples of speech materials are given in Annex A.
In order to ensure minimum requirements of precision and comparability between different test procedures including speech recognition tests in different languages, this document specifies requirements for the composition, validation and evaluation of speech test materials, and the realization of speech recognition tests. This document does not specify the contents of the speech material because of the variety of languages.
Furthermore, this document also specifies the determination of reference values and requirements for the realization and manner of presentation. In addition, there are features of speech tests described which are important to be specified, but which are not understood as a requirement.
This document specifies procedures and requirements for speech audiometry with the recorded test material being presented by an audiometer through a transducer, e.g., an earphone, bone vibrator, or loudspeaker arrangement for sound field audiometry. Methods for using noise either for masking the non-test ear or as a competing sound are described.
Some test subjects, for example children, can require modified test procedures not specified in this document.
Specialized tests, such as those used for evaluating directional hearing and dichotic hearing, are outside the scope of this document.
|
Published |
2022-01 |
Edition : 3 |
Number of pages : 41 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 8798:1987 |
Acoustics — Reference levels for narrow-band masking noise |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 4850:1979 |
Personal eye-protectors for welding and related techniques — Filters — Utilisation and transmittance requirements |
Specifies the numbering of and transmittance requirements for filters intended to protect operatives performing manual work involving welding, braze welding, arc gouging and thermal cutting. It also gives guidance on the selection and use of these filters. Optical test methods are the subject of ISO 4854. Non-optical test methods are the subject of ISO 4855.
|
Withdrawn |
1979-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/DTS 9241-620 |
Ergonomic requirements for office work with visual display terminals (VDTs) — Part 620: The role of sound for users of interactive systems |
This technical specification provides users with a summary of the existing knowledge about ergonomics considerations for the influence of sound in use environments on humans. It describes how unwanted effects of sound (noise) can be controlled. The main goals for controlling the acoustic use environment are reducing the rating level of sound in general, optimizing signal-to-noise ratio and sound reduction within the workspace.
This document also provides users with organizational measures that can be taken if and where technical measures do not help sufficiently. Also included are measures in personal level.
This document deals with sound events that can cause extra-aural effects. Noise-induced hearing loss prevention and the ways to eliminate or reduce hazardous noise exposure are not covered by this document.
|
Under development |
|
Edition : 1 |
Number of pages : 26 |
Technical Committee |
13.140
Noise with respect to human beings
;
13.180
Ergonomics
|
| ISO 9612:1997 |
Acoustics — Guidelines for the measurement and assessment of exposure to noise in a working environment |
|
Withdrawn |
1997-05 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 9612:2009 |
Acoustics — Determination of occupational noise exposure — Engineering method |
ISO 9612:2009 specifies an engineering method for measuring workers' exposure to noise in a working environment and calculating the noise exposure level. ISO 9612:2009 deals with A-weighted levels but is applicable also to C-weighted levels. Three different strategies for measurement are specified. The method is useful where a determination of noise exposure to engineering grade is required, e.g. for detailed noise exposure studies or epidemiological studies of hearing damage or other adverse effects.
The measuring process requires observation and analysis of the noise exposure conditions so that the quality of the measurements can be controlled. ISO 9612:2009 provides methods for estimating the uncertainty of the results.
ISO 9612:2009 is not intended for assessment of masking of oral communication or assessment of infrasound, ultrasound and non-auditory effects of noise. It does not apply to the measurement of the noise exposure of the ear when hearing protectors are worn.
Results of the measurements performed in accordance with ISO 9612:2009 can provide useful information when defining priorities for noise control measures.
|
Published |
2009-04 |
Edition : 2 |
Number of pages : 43 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/DIS 9612 |
Acoustics — Determination of occupational noise exposure — Methodology |
|
Under development |
|
Edition : 3 |
Number of pages : 48 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 11690-1:1996 |
Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies |
|
Withdrawn |
1996-11 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 11690-1:2020 |
Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies |
This document outlines strategies to be used in dealing with noise problems in existing and planned workplaces by describing basic concepts in noise control (noise reduction, noise emission, noise immission and noise exposure). It is applicable to all types of workplaces and all types of sources of sound which are met in workplaces, including human activities.
It includes those important strategies to adopt when buying a new machine or equipment.
This document deals only with audible sound.
|
Published |
2020-10 |
Edition : 2 |
Number of pages : 29 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 11690-2:1996 |
Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 2: Noise control measures |
|
Withdrawn |
1996-11 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 11690-2:2020 |
Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 2: Noise control measures |
This document deals with the technical aspects of noise control in workplaces. The various technical measures are stated, the related acoustical quantities described, the magnitude of noise reduction discussed, and the verification methods outlined.
This document deals only with audible sound.
|
Published |
2020-10 |
Edition : 2 |
Number of pages : 31 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/TR 11690-3:1997 |
Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 3: Sound propagation and noise prediction in workrooms |
Deals with sound propagation together with the prediction of sound pressure levels at the workplace. Contains recommendations concerning the use of noise prediction as an aid for noise control.
|
Published |
1997-02 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 4852:1978 |
Personal eye-protectors — Infra-red filters — Utilisation and transmittance requirements |
Gives the numbering of and transmittance requirements for filters. It also defines guidance on their selection and use. Optical test methods form subject of ISO 4854. Non-optical test methods form the subject of ISO 4855. The symbol for filters includes a code number of transmittance is described in clause 5 of ISO 4854.
|
Withdrawn |
1978-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 11904-1:2002 |
Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 1: Technique using a microphone in a real ear (MIRE technique) |
ISO 11904-1:2002 specifies basic framework measurement methods for sound immissions from sound sources placed close to the ear. These measurements are carried out with miniature or probe microphones inserted in the ear canals of human subjects. The measured values are subsequently converted into corresponding free-field or diffuse-field levels. The results can be given as free-field related or diffuse-field related equivalent continuous A-weighted sound pressure levels. The technique is denoted the microphone-in-real-ear technique (MIRE technique).
ISO 11904-1:2002 is applicable to exposure from sources close to the ear, for example during equipment tests or at the workplace by earphones or hearing protectors with audio communication facilities.
ISO 11904-1:2002 is applicable in the frequency range from 20 Hz to 16 000 Hz.
|
Published |
2002-10 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 11904-1:2002/Cor 1:2004 |
Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 1: Technique using a microphone in a real ear (MIRE technique) — Technical Corrigendum 1 |
|
Published |
2004-01 |
Edition : 1 |
|
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 11904-2:2021 |
Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 2: Technique using a manikin |
This document specifies basic framework measurement methods for sound immission from sound sources placed close to the ear. These measurements are carried out with a manikin, equipped with ear simulators including microphones. The measured values are subsequently converted into corresponding free-field or diffuse-field levels. The results are given as free-field related or diffuse-field related equivalent continuous A-weighted sound pressure levels. The technique is denoted the manikin technique.
This document is applicable to exposure to sound from sources close to the ear, for example during equipment tests or at the workplace to sound from earphones or hearing protectors with audio communication facilities.
This document is applicable in the frequency range from 20 Hz to 10 kHz. For frequencies above 10 kHz, ISO 11904-1 can be used.
|
Published |
2021-03 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 14257:2001 |
Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
|
Published |
2001-10 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/TS 15666:2003 |
Acoustics — Assessment of noise annoyance by means of social and socio-acoustic surveys |
ISO/TS 15666:2003 provides specifications for socio-acoustic surveys and social surveys which include questions on noise effects (briefly referred to hereafter as "social surveys"). Its scope includes questions to be asked, response scales, key aspects of conducting the survey, and reporting the results. ISO/TS 15666:2003 does not prescribe methods for the analysis of data obtained from these questions. It is recognized that specific requirements and protocols of some social and socio-acoustic studies may not permit the use of some or all of the present specifications. ISO/TS 15666:2003 in no way lessens the merit, value or validity of such research studies.
The scope of ISO/TS 15666:2003 is restricted to surveys conducted to obtain information about noise annoyance "at home". Surveys conducted to obtain information about noise annoyance in other situations, such as recreational areas, work environments and inside vehicles, are not included.
ISO/TS 15666:2003 concerns only the questions on noise annoyance used in a social survey and the most important additional specifications needed to accomplish a high level of comparability with other studies. Other elements which are required to provide high-quality social surveys, but which are not specific for social surveys on noise (such as sampling methods), can be found in textbooks.
Compliance with the recommendations of ISO/TS 15666:2003 does not guarantee the collection of accurate, precise or reliable information about the prevalence of noise-induced annoyance and its relationship to noise exposure. Other aspects of study design, as well as uncertainties of estimation and measurement of noise exposure, can influence the interpretability of survey findings to a great extent.
|
Withdrawn |
2003-02 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/TS 15666:2021 |
Acoustics — Assessment of noise annoyance by means of social and socio-acoustic surveys |
This document provides specifications for socio-acoustic surveys and social surveys which include questions on noise effects (referred to hereafter as “social surveys”). It includes questions to be asked, response scales, key aspects of conducting the survey, and reporting the results.
It is recognized that specific requirements and protocols of some social studies may not permit the use of some or all of the present specifications. This document in no way lessens the merit, value or validity of such research studies.
The scope of this document is restricted to surveys conducted to obtain information about noise annoyance “at home”. Surveys conducted to obtain information about noise annoyance in other situations, such as recreational areas, work environments and inside vehicles, are not included.
This document concerns only the questions on noise annoyance used in a social survey and the most important additional specifications needed to accomplish a high level of comparability with other studies. Other elements which are required to provide high-quality social surveys, but which are not specific for social surveys on noise (such as sampling methods), can be found in textbooks (see References [1] and [2]).
Conformity with the recommendations of this document does not guarantee the collection of accurate, precise or reliable information about the prevalence of noise-induced annoyance and/or its relationship to noise exposure. Other aspects of study design, as well as uncertainties of estimation and measurement of noise exposure, can influence the interpretability of survey findings to a great extent.
|
Published |
2021-05 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO 17201-6:2021 |
Acoustics — Noise from shooting ranges — Part 6: Sound pressure measurements close to the source for determining exposure to sound |
This document specifies methods for recording the time history of the sound pressure produced either by shooting with calibres of less than 20 mm, or by detonation of explosive charges of less than 50 g TNT equivalent, within the shooting range at locations of interest, regarding the exposure to sound of the shooter, or any other person within the shooting range. The time history of the sound pressure can be the basis for further analyses of this type of sound at the locations of interest.
|
Published |
2021-07 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
13.140
Noise with respect to human beings
;
95.020
Military in general
;
17.140.20
Noise emitted by machines and equipment
;
97.220.10
Sports facilities
|
| ISO 17624:2004 |
Acoustics — Guidelines for noise control in offices and workrooms by means of acoustical screens |
ISO 17624:2004 deals with the effectiveness of acoustical screens. It specifies the acoustical and operational requirements to be agreed upon between the supplier or manufacturer and the user of acoustical screens.
ISO 17624:2004 is applicable to the following types of acoustical screens: free-standing acoustical screens for offices, service areas, exhibition areas, and similar rooms; acoustical screens integrated in the furniture of such rooms; portable and removable acoustical screens for workshops; fixed room partitions with more than 10 % of the connecting area open and acoustically untreated.
Walls of partial acoustic enclosures and cabins which, together with the room boundary surfaces, also partition a room and provide more than 10 % open and acoustically untreated area, are also treated as acoustical screens.
ISO 17624:2004 is not applicable to cabinet walls and similar multi-layer walls whose thickness exceeds 0,2 m, nor to banners and other types of suspended baffles.
|
Published |
2004-05 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/TS 20065:2022 |
Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method |
This document describes a method for the objective determination of the audibility of tones in environmental noise.
This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.
NOTE The procedure has not been validated below 50 Hz.
The method presented herein can be used in continuous measurement stations that work automatically.
|
Published |
2022-12 |
Edition : 1 |
Number of pages : 33 |
Technical Committee |
13.140
Noise with respect to human beings
;
17.140.01
Acoustic measurements and noise abatement in general
|
| ISO 22868:2005 |
Forestry machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) |
ISO 22868:2005 specifies a noise test code for determining, efficiently and under standardized conditions, the noise emission characteristics of portable, hand-held, combustion-engine-powered forest machines such as chain-saws, brush cutters and grass trimmers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level. The code is applicable for manufacturers' product controls as well as type tests. It is intended that the results obtained will be able to be used to compare different machines or different models of the same type of machine. Although the noise emission values determined are obtained in an artificial operation, they are representative of noise emission in a real work situation.
|
Withdrawn |
2005-02 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.140
Noise with respect to human beings
;
17.140.20
Noise emitted by machines and equipment
;
65.060.80
Forestry equipment
|
| ISO 22868:2011 |
Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) |
ISO 22868:2011 specifies a noise test code for determining, efficiently and under standardized conditions, the noise emission characteristics of portable, hand‑held, combustion‑engine‑powered forestry and garden machines, including chain-saws, brush-cutters, grass-trimmers, pole-mounted powered pruners, hedge-trimmers and garden blowers/vacuums. Noise emission characteristics include the A‑weighted emission sound pressure level at the operator position and the A‑weighted sound power level.
|
Withdrawn |
2011-03 |
Edition : 2 |
Number of pages : 35 |
Technical Committee |
13.140
Noise with respect to human beings
;
17.140.20
Noise emitted by machines and equipment
;
65.060.80
Forestry equipment
|
| ISO 22868:2021 |
Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) |
This document specifies a noise test code for determining, efficiently and under standardized conditions, the common noise emission characteristics of portable, hand-held, combustion engine powered forest and garden machines, and specific requirements for chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden blowers/vacuums/knapsack mist blowers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level.
Noise test codes as described in this document enable the manufacturer to verify the effort regarding low noise design.
|
Published |
2021-01 |
Edition : 3 |
Number of pages : 37 |
Technical Committee |
13.140
Noise with respect to human beings
;
17.140.20
Noise emitted by machines and equipment
;
65.060.80
Forestry equipment
|
| ISO 4851:1979 |
Personal eye-protectors — Ultra-violet filters — Utilisation and transmittance requirements |
Gives the numbering of and transmittance requirements for filters. It defines guidance and their selection and use. Optical test methods form the subject of ISO 4854. Non-optical test methods form the subject of ISO 4855. The symbol for filters includes a code number and the shade number corresponding to the filter. The determination of transmittance is described in clause 5 of ISO 4854.
|
Withdrawn |
1979-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 22955:2021 |
Acoustics — Acoustic quality of open office spaces |
This document provides technical guidance to achieve acoustic quality of open office spaces to support dialogue and formal commitment between the various stakeholders involved in the planning, design, construction or layout of open-plan workspaces: end customers, project owners, prescribers, consultants, etc.
It is applicable to all open-plan offices in which the following activities are performed:
— Space type 1: activity not known yet – vacant floor plate;
— Space type 2: activity mainly focusing on outside of the room communication (by telephone/audio/video);
— Space type 3: activity mainly based on collaboration between people at the nearest workstations;
— Space type 4: activity based on a small amount of collaborative work;
— Space type 5: activity that can involve receiving public;
— Space type 6: combining activities within the same space.
More specifically, this document applies to refitting projects of existing business sites (renovation and/or change or add activities) and layout projects for new spaces and spaces delivered unfurnished.
It covers both the activities and the operations of the following stakeholders:
— end customers: diagnosis, survey, expression of needs in keeping with their knowledge in the area of acoustics;
— project owners: drafting contract specifications;
— project management companies (architects, acousticians, ergonomists, economists and consulting engineers): indicating the performance of acoustic solutions and the layout principles used to achieve the result expressed in the specifications;
— building traders: reaching a clear and verifiable target with respect to the choices of materials and implementation;
— Building developer: promoting indoor environmental quality, including acoustic comfort, in estate operations in order to use it as a competitive element;
— specialists in occupational health, safety and quality;
— expert assessments and consultancy.
|
Published |
2021-05 |
Edition : 1 |
Number of pages : 39 |
Technical Committee |
13.140
Noise with respect to human beings
;
91.120.20
Acoustics in building. Sound insulation
|
| ISO 28961:2012 |
Acoustics — Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions |
ISO 28961:2012 provides descriptive statistics, percentiles, of the hearing threshold distribution whose mean is the reference threshold value specified in ISO 226 and ISO 389-7. The mean and percentile thresholds are specified under the following conditions: a) the sound field in the absence of the listener consists of a free progressive plane wave (free field); b) the sound source is directly in front of the listener (frontal incidence); c) the sound signals are pure (sinusoidal) tones; d) the sound pressure level is measured in the absence of the listener at the position where the centre of the listener's head would be; e) listening is binaural; f) the listeners are otologically normal persons within the age range 18 years to 25 years inclusive.
The percentiles are given in numerical form for the preferred frequencies in the one-third-octave series from 20 Hz to 16 000 Hz inclusive, in accordance with ISO 266, and for some intermediate audiometric frequencies.
The percentiles are applicable to the assessment of an individual's hearing in relation to the distribution of hearing thresholds under the above conditions. The percentiles can also be used to evaluate the audibility of low-level noise around hearing threshold.
|
Published |
2012-01 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.140
Noise with respect to human beings
|
| ISO/R 1511:1970 |
Protective helmets for road users |
|
Withdrawn |
1970-06 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 3873:1977 |
Industrial safety helmets |
Specifies physical and performance requirements, methods of test and marking requirements. The mandatory requirements apply to helmets for general use in industry. Additional optional performance requirements are included: Shock absorption, penetration, flammability, electrical insulation, and lateral rigidity.
|
Published |
1977-03 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4007:1977 |
Personal eye-protectors — Vocabulary |
Defines the principal terms used. These terms and their definitions conform to ISO 31/VI and CIE Publication 17. It states in the annex the spectral distribution of solar radiation energy (in the infra-red spectrum). This annex is not an integral part of the standard.
|
Withdrawn |
1977-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.040.13
Environment. Health protection. Safety (Vocabularies)
;
13.340.20
Head protective equipment
|
| ISO 4007:2012 |
Personal protective equipment — Eye and face protection — Vocabulary |
ISO 4007:2012 defines and explains the principal terms used in the field of personal eye and face protection.
|
Withdrawn |
2012-05 |
Edition : 2 |
Number of pages : 110 |
Technical Committee |
01.040.13
Environment. Health protection. Safety (Vocabularies)
;
13.340.20
Head protective equipment
|
| ISO 4007:2018 |
Personal protective equipment — Eye and face protection — Vocabulary |
This document defines and explains the principal terms used in the field of personal eye and face protection.
|
Published |
2018-10 |
Edition : 3 |
Number of pages : 74 |
Technical Committee |
01.040.13
Environment. Health protection. Safety (Vocabularies)
;
13.340.20
Head protective equipment
|
| ISO 4849:1981 |
Personal eye-protectors — Specifications |
Deals with general considerations, such as: designation, classification, requirements applicable to all types, some particular requirements, sampling, identification. The transmittance requirements and methods of test for particular uses are given in the International Standards listed in clause 3. Gives functional requirements for the various types used mainly in industry. Applies to all types used against various hazards which are likely to damage the eye or impair vision, with the exception of nuclear radiation, X-rays, laser beams and low-temperature infrared radiation.
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4854:1981 |
Personal eye-protectors — Optical test methods |
Specifies the optical test methods the requirements for which are given in ISO 4849 to ISO 4853. The other test methods are given in ISO 4855. The following tests are described: test for refractive, astigmatic and prismatic powers, diffusion test, test for quality of material and surface, determination of transmittance. Annex A describes testing of unmounted oculars. Annexes B and C describe two other optional methods for prismatic power measurement.
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4855:1981 |
Personal eye-protectors — Non-optical test methods |
Specifies the optical test methods the requirements for which are given in ISO 4849 to ISO 4853. The other test methods are given in ISO 4855. The following tests are described: test for robustness of the protectors, test for stability at elevated temperature, test for resistance to ultraviolet radiation, test for ignition, test for resistance to corrosion, test for suitability for disinfection, test for resistance to high-speed particles, test for non-adherence of molten metal, test for resistance to penetration of hot solids, test for proof against chemical droplets, test for protection against dust, and test for protection against gas.
|
Withdrawn |
1981-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4856:1982 |
Personal eye-protectors — Synoptic tables of requirements for oculars and eye-protectors |
Provides a survey of the requirements which have to be met by the various types as well as by the combination on them with the exception of filters as protectors against laser radiation, specifications of which are given in ISO 6161. Requirements to be met by the different types of oculars are given in table 1, requirements for frames and mounted oculars are given in table 2.
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-1:1990 |
Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation |
Specifies a method for measuring sound attenuation at the threshold of hearing. The procedure is designed to yield values close to the maximum attenuation which are not normally attained under field conditions. The values reflect the attenuating characteristics only to the extent that users wear the device in the same manner as did the test subjects. Data are collected at low sound pressure levels but which are also representative of the values at higher sound pressure levels.
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-1:2018 |
Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation |
This document specifies a subjective method for measuring sound attenuation of hearing protectors at the threshold of hearing. The method is a laboratory method designed to yield reproducible values under controlled measurement conditions. The values reflect the attenuating characteristics of the hearing protector only to the extent that users wear the device in the same manner as did the test subjects.
For a more representative indication of field performance the methods of ISO/TS 4869‑5 can be used.
This test method yields data which are collected at low sound pressure levels (close to the threshold of hearing) but which are also representative of the attenuation values of hearing protectors at higher sound pressure levels. An exception occurs in the case of amplitude-sensitive hearing protectors for sound pressure levels above the point at which their level-dependent characteristics become effective. At those sound pressure levels the method specified in this document is inapplicable, as it will usually underestimate sound attenuation for these devices.
NOTE Due to masking from physiological noise in the occluded ear tests, sound attenuations below 500 Hz can be overestimated by a few decibels.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-2:1994 |
Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
Describes three methods (the octave-band, HML and SNR methods) for estimating the A-weighted sound pressure levels effective when hearing protectors are worn. The methods are applicable to either the sound pressure level or the equivalent continuous sound pressure level of the noise. Although primarily intended for steady noise exposures, the methods are also applicable to noises containing impulsive components. They are not suitable for use with peak sound pressure level measurements.
|
Withdrawn |
1994-08 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-2:1994/Cor 1:2006 |
Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn — Technical Corrigendum 1 |
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-2:2018 |
Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
This document specifies three methods (the octave-band, HML and SNR methods) of estimating the A-weighted sound pressure levels effective when hearing protectors are worn. The methods are applicable to either the sound pressure level or the equivalent continuous sound pressure level of the noise. Although primarily intended for steady noise exposures, the methods are also applicable to noises containing impulsive components. It is possible that these methods could not be suitable for use with peak sound pressure level measurements.
The octave-band, H, M, L or SNR values are suitable for establishing sound attenuation criteria for selecting or comparing hearing protectors, and/or setting minimum acceptable sound attenuation requirements.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-3:2007 |
Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
ISO 4869-3:2007 specifies a method for measuring the insertion loss of ear-muff type hearing protectors using an acoustic test fixture. The method is applicable to the investigation of production spreads of performance as part of type approval or certification procedures, and to the investigation of the change of performance with age. It is intended to ensure that ear-muff hearing protector samples submitted for subjective testing of attenuation according to ISO 4869-1 have performances typical of the type.
The method specified in ISO 4869-3:2007 is not applicable as the basic test for type approval. Performance data obtained by this method are not intended to be quoted as representing the real-ear sound attenuation of an ear-muff, nor the protection provided by the ear-muff.
|
Published |
2007-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/TR 4869-3:1989 |
Acoustics — Hearing protectors — Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes |
The procedure specified may be used to investigate production spreads of performance as part of type approval or certification procedures and the change of performance with age. It is not intended to be used as the basic test for type approval purposes. Performance data obtained are not to be quoted as representing the real-ear sound attenuation of an ear-muff, nor the protection provided by the ear-muff.
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/TR 4869-4:1998 |
Acoustics — Hearing protectors — Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs |
|
Withdrawn |
1998-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO/TS 4869-5:2006 |
Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects |
ISO/TS 4869-5:2006 specifies a method for measuring noise reduction of passive hearing protectors at the threshold of hearing. The method is designed to provide estimates of the noise reduction obtained by typical groups of users in real-world occupational settings, who may lack the training and motivation to wear hearing protectors in an optimum manner.
The principle of the test method is to measure the difference in hearing threshold with and without wearing a hearing protector. This difference between the thresholds constitutes the noise reduction. The measurement is done twice on a given number of test subjects.
This test method yields data that are collected at low sound pressure levels (close to the threshold of hearing), but which are also representative of the noise reduction values of hearing protectors at higher sound pressure levels. ISO/TS 4869-5:2006 is inapplicable for level-dependent hearing protectors for sound pressure levels above the point at which their level-dependent characteristics become effective.
|
Published |
2006-10 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869-6:2019 |
Acoustics — Hearing protectors — Part 6: Determination of sound attenuation of active noise reduction earmuffs |
This document is concerned with active noise reduction (ANR) earmuffs. It specifies the test methods for the determination of the active insertion loss and calculation procedures for deriving the total attenuation. For this aim, the values of sound attenuation in the passive mode also have to be known and are determined according to ISO 4869‑1. These methods are intended for steady noise exposures and are not applicable to noises containing impulsive components.
The test methods account for the acoustical interaction between the wearer and the device using measurements of passive (REAT) and active microphone-in-real-ear (MIRE) measurements as specified in ISO 4869‑1 and ISO 11904‑1, respectively.
|
Published |
2019-02 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 4869:1981 |
Acoustics — Measurement of sound attenuation of hearing protectors — Subjective method |
|
Withdrawn |
1981-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 6161:1981 |
Personal eye-protectors — Filters and eye-protectors against laser radiation |
Specifies requirements for spectacle filters and protectors within the spectral region 0,2 to 1000 micron. The work, which was staggered over several years, represents a basic study for which a majority consensus was reached at the international level. To take account of new developments and knowledge relating to lasers a revision of this standard will be undertaken.
|
Withdrawn |
1981-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
13.340.20
Head protective equipment
|
| ISO 10256-1:2016 |
Protective equipment for use in ice hockey — Part 1: General requirements |
ISO 10256-1:2016 is part of ISO 10256 specifies general requirements for head, face, neck and body protectors (hereafter referred to as protectors) for use in ice hockey.
ISO 10256-1:2016 is intended only for protectors used for ice hockey. Requirements are given for the following:
a) terms and definitions;
b) innocuousness;
c) ergonomics;
d) test report;
e) permanent markings;
f) information for users.
In the ISO 10256 series, collateral standards specify performance requirements for protectors for use in ice hockey and are intended to be read in conjunction with ISO 10256-1:2016.
NOTE 1 The requirements of a clause take precedence over a figure.
NOTE 2 The intent is to reduce the risk of injury to an ice hockey player without compromising the form or appeal of the game. These standards presume that the rules of play for ice hockey will be followed by players and enforced by officials.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO 10256-2:2016 |
Protective equipment for use in ice hockey — Part 2: Head protection for skaters |
ISO 10256-2:2016 specifies performance requirements and test methods for head protectors for use in ice hockey and is intended to be read in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a) construction and protected area;
b) shock absorption;
c) penetration;
d) retention system properties;
e) field of vision;
f) marking and information.
ISO 10256-2:2016 applies to head protectors worn by
- players other than goalkeepers, and
- certain functionaries (e.g. referees).
NOTE 1 The requirements of a Clause take precedent over a figure.
NOTE 2 The intent of this part of ISO 10256 is to reduce the risk of injury to the head without compromising the form or appeal of the game.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO/FDIS 10256-2 |
Protective equipment for use in ice hockey — Part 2: Head protectors for skaters |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO 10256-3:2016 |
Protective equipment for use in ice hockey — Part 3: Face protectors for skaters |
ISO 10256-3:2016 specifies performance requirements and test methods for face protectors (including visors) for use in ice hockey and is intended to be used in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a) construction and area of coverage;
b) resistance to puck impact;
c) penetration;
d) field of vision;
e) geometric (visual) optics and acuity;
f) transmittance and haze;
g) marking and information.
ISO 10256-3:2016 applies to face protectors worn by
- players other than goalkeepers, and
- certain functionaries (e.g. referees).
NOTE 1 The requirements of a Clause take precedent over a figure.
NOTE 2 The intent is to reduce the risk of injury to the face without compromising the form or appeal of the game.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO/FDIS 10256-3 |
Protective equipment for use in ice hockey — Part 3: Face and eye protectors for skaters |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO 10256-4:2016 |
Protective equipment for use in ice hockey — Part 4: Head and face protection for goalkeepers |
ISO 10256-4:2016 covers performance requirements for head and face protectors to be used by ice hockey goalkeepers. It is intended to be read in conjunction with ISO 10256‑1, ISO 10256‑2 and ISO 10256‑3.
Performance requirements are established, where appropriate for the following:
a) materials, assembly, and design;
b) protected areas (coverage) and penetration resistance;
c) shock absorption;
d) puck impact resistance;
e) retention;
f) optical quality.
NOTE 1 The requirements of a clause take precedent over a figure.
NOTE 2 The intent of this part of ISO 10256 is to reduce the risk of injury to the head and face of ice hockey goalkeepers without compromising the form and appeal of the game.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO/FDIS 10256-4 |
Protective equipment for use in ice hockey — Part 4: Head and face protectors for goalkeepers |
|
Under development |
|
Edition : 2 |
|
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO 10256-5:2017 |
Protective equipment for use in ice hockey — Part 5: Neck laceration protectors for ice hockey players |
ISO 10256-5:2017 specifies performance requirements and test methods for neck laceration protectors used in ice hockey. Neck laceration protectors are needed to reduce the risk of direct laceration to the neck caused by contact of a hockey skate blade.
The tests required to ensure that a neck laceration protector conforms to the requirements of this document do not attempt to predict the performance of the neck protector in all possible situations. This document does not address protection from the impact of pucks, sticks or other objects.
ISO 10256-5:2017 does not address accessories that are associated with a neck laceration protector.
|
Published |
2017-03 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO 10256:1996 |
Protective helmets for ice hockey players |
|
Withdrawn |
1996-10 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
13.340.20
Head protective equipment
;
97.220.20
Winter sports equipment
|
| ISO 13090-1:1998 |
Mechanical vibration and shock — Guidance on safety aspects of tests and experiments with people — Part 1: Exposure to whole-body mechanical vibration and repeated shock |
|
Published |
1998-06 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
13.160
Vibration and shock with respect to human beings
|