| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 18808:2021 |
Agricultural tyres for construction machines |
This document specifies the designation, dimensions, approved rim contours, load ratings and reference speeds for agricultural tyres fitted to construction machines (e.g. backhoe loaders, small dumpers, loaders, excavators) operating on building sites under loading and transport conditions.
Tyres conforming to this document are identified by the suffix IND in the tyre size designation; code designated tyres can alternatively, in place of the suffix IND, be identified by the classification code R-4.
NOTE Agricultural tyres without the suffix IND in the tyre size designation or with a classification code differing from "R-4" are not part of this document. Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines are part of ISO 4251-1 and ISO 4251-2. Code designated radial tyres for agricultural tractors, trailers and machines are part of ISO 8664. Metric designated tyres for agricultural tractors, trailers and machines are part of ISO 7867-2. Tyres for forestry machines, identified by suffix LS, or classification code LS-x are part of ISO 18807.
|
Published |
2021-03 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
91.220
Construction equipment
;
83.160.99
Other tyres
|
| ISO 19432-1:2020 |
Building construction machinery and equipment — Portable, hand-held, internal combustion engine-driven abrasive cutting machines — Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels |
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine-driven cut-off machines intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bonded-abrasive and/or super-abrasive (for example diamond) cut-off wheel having a maximum outer diameter of 430 mm, centre-mounted on and driven by a spindle shaft where the top of the wheel rotates away from the operator (see Figure 1).
This document deals with all significant hazards, hazardous situations or hazardous events significant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. See Annex F for a list of significant hazards.
This document specifies methods for the elimination or reduction of hazards arising from their use, as well as the type of information on safe working practices to be provided with the machines.
Cut-off wheel specifications are not considered in this document. Cut-off wheels are deemed to comply to existing cut-off wheel standards.
NOTE For example see Bibliography.
All through the document, portable, hand-held, internal combustion engine-driven cut-off machines are called "cut-off machines".
This document is not applicable to machines manufactured before the date of its publication.
|
Published |
2020-01 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
91.220
Construction equipment
|
| ISO 19432:2006 |
Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements and testing |
ISO 19432:2006 specifies safety requirements and their verification by testing for the design and construction of portable, hand-held, internal combustion engine driven, cut-off machines, intended to be used by a single operator in the cutting of construction materials such as asphalt, concrete, stone and metal. It is applicable to those machines designed purposely for use with a rotating, bonded-abrasive and/or superabrasive (diamond) cut-off wheel having a maximum outside diameter of 406 mm, centre-mounted on, and driven by, a spindle shaft, where the top of the wheel rotates away from the operator.
|
Withdrawn |
2006-03 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
91.220
Construction equipment
|
| ISO 19432:2012 |
Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements |
ISO 19432:2012 specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, internal combustion engine driven, cut-off machines, intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bonded-abrasive and/or super-abrasive (diamond) cut-off wheel having a maximum outer diameter of 430 mm, centre-mounted on, and driven by, a spindle shaft, where the top of the wheel rotates away from the operator.
ISO 19432:2012 deals with all significant hazards, hazardous situations or hazardous events significant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
ISO 19432:2012 specifies methods for the elimination or reduction of hazards arising from their use, as well as the type of information on safe working practices to be provided with the machines.
Cut-off wheel specifications are not considered in ISO 19432:2012; for such specifications, see, for example, ISO 603-7, ISO 13942 and ISO 22917.
ISO 19432:2012 is not applicable to machines manufactured before the date of its publication.
|
Withdrawn |
2012-07 |
Edition : 2 |
Number of pages : 43 |
Technical Committee |
91.220
Construction equipment
|
| ISO 19433:2008 |
Building construction machinery and equipment — Pedestrian-controlled vibratory plates — Terminology and commercial specifications |
ISO 19433:2008 provides a terminology and sets out the commercial specifications for pedestrian‑controlled vibratory plates used in building construction. It is applicable to both forward- and reversible-type plates. These plate compactors are intended for the mechanical compaction of all disturbed soil, sand or aggregates used for load-bearing purposes — whether in new construction or repairs.
|
Published |
2008-04 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
91.220
Construction equipment
|
| ISO 19452:2008 |
Building construction machinery and equipment — Pedestrian-controlled vibratory (percussion) rammers — Terminology and commercial specifications |
ISO 19452:2008 provides a terminology and sets out commercial specifications for pedestrian‑controlled vibratory (percussion) rammers used in building construction.
It is not applicable to rammers that compact by use of a tamping action of the foot-plate (shoe), nor is it applicable to explosion-type rammers.
|
Published |
2008-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
91.220
Construction equipment
|
| ISO 19452:2008/Cor 1:2008 |
Building construction machinery and equipment — Pedestrian-controlled vibratory (percussion) rammers — Terminology and commercial specifications — Technical Corrigendum 1 |
|
Published |
2008-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
91.220
Construction equipment
|
| ISO 19711-1:2018 |
Building construction machinery and equipment — Truck mixers — Part 1: Terminology and commercial specifications |
This document defines terms and commercial specifications for truck mixers used for producing concrete or mortar and for delivering concrete, mortar or the materials of the mixture to worksites.
This document is applicable to truck mixers that are either
a) truck mounted, or
b) semi-trailer mounted.
This document does not apply to
— fixed (stationary) mixers (see ISO 18650-1);
— turbo mixers (see ISO 18650-1);
— concrete or mortar mixing plants (see ISO 19720-1);
— small portable mixers (see ISO 18650-1);
— purpose-built underground truck mixers;
— volumetric mixers (mobile concrete or mortar mixing plants).
|
Published |
2018-08 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
91.220
Construction equipment
;
01.040.91
Construction materials and building (Vocabularies)
|
| ISO/DIS 19711-2 |
Building construction machinery and equipment — Truck mixers — Part 2: Safety requirements |
|
Under development |
|
Edition : 1 |
Number of pages : 35 |
Technical Committee |
91.220
Construction equipment
|
| ISO 19720-1:2017 |
Building construction machinery and equipment — Plants for the preparation of concrete and mortar — Part 1: Terminology and commercial specifications |
ISO 19720-1:2017 specifies terms and definitions and commercial specifications for concrete mixing plants, concrete batching plants and dry mortar mixing plants used in the preparation of concrete and mortar.
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
91.220
Construction equipment
;
01.040.91
Construction materials and building (Vocabularies)
|
| ISO 21573-1:2006 |
Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications |
ISO 21573-1:2006 establishes terminology and commercial-literature specifications for concrete pumps which are used on building sites for concrete-mix delivery.
|
Withdrawn |
2006-05 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
91.220
Construction equipment
|
| ISO 21573-1:2014 |
Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications |
ISO 21573-1:2014 establishes terminology and commercial-literature specifications for concrete pumps which are used on building sites for concrete-mix delivery.
|
Published |
2014-08 |
Edition : 2 |
Number of pages : 21 |
Technical Committee |
91.220
Construction equipment
|
| ISO 21573-2:2008 |
Building construction machinery and equipment — Concrete pumps — Part 2: Procedure for examination of technical parameters |
ISO 21573-2:2008 specifies the procedure and requirements for examining the technical commercial specifications of concrete pumps as defined in ISO 21573-1. It applies to mobile (with or without boom) and stationary concrete pumps.
|
Withdrawn |
2008-06 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
91.220
Construction equipment
|
| ISO 21573-2:2020 |
Building construction machinery and equipment — Concrete pumps — Part 2: Procedure for examination of technical parameters |
This document specifies the procedure and requirements for examining the technical commercial specifications of factory new piston-type concrete pump and rotary-type concrete pump as defined in ISO 21573‑1.
It applies to mobile concrete pumps (with or without concrete-placing boom) and stationary concrete pumps.
|
Published |
2020-12 |
Edition : 2 |
Number of pages : 44 |
Technical Committee |
91.220
Construction equipment
|
| ISO 21592:2006 |
Building construction machinery and equipment — Concrete spraying machines — Terminology and commercial specifications |
ISO 21592:2006 establishes terminology and commercial literature specifications for concrete spraying machines typically used for the execution of linings covering reinforcements of concrete structures and on bases of rock, walls of bricks, steel structures and wooden formworks. The figures given in annex show examples of machine types, structures and dimensional characteristics.
|
Published |
2006-06 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
91.220
Construction equipment
|
| ISO 3449:1984 |
Earth-moving machinery - Falling-object protective structures — Laboratory tests and performance requirements |
|
Withdrawn |
1984-04 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 21873-1:2008 |
Building construction machinery and equipment — Mobile crushers — Part 1: Terminology and commercial specifications |
ISO 21873-1:2008 establishes terminology and content of commercial literature specifications for mobile crushers, mounted on crawler, truck or semi-trailer, used in the building construction industry. It is not applicable to fixed crushers.
|
Withdrawn |
2008-06 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
91.220
Construction equipment
|
| ISO 21873-1:2015 |
Building construction machinery and equipment — Mobile crushers — Part 1: Terminology and commercial specifications |
ISO 21873-1:2015 specifies terminology and commercial literature specifications for mobile crushers used for crushing rocks or reprocessing construction materials and capable of relocation between worksites.
It applies to mobile crushers that are either
- self-propelled (mounted on a chassis),
- lorry (truck) mounted, or
- semi-trailer mounted.
It does not apply to the following:
- fixed (stationary) crushers;
- large mining-type movable crushers.
|
Published |
2015-08 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
91.220
Construction equipment
|
| ISO 21873-2:2009 |
Building construction machinery and equipment — Mobile crushers — Part 2: Safety requirements |
ISO 21873-2:2009 establishes the safety requirements for mobile crushers, as defined in ISO 21873-1, used in the building construction industry for crushing concrete debris and stones. It deals with all the significant hazards, hazardous situations and events relevant to mobile crushers when used as intended and under the conditions foreseen by the manufacturer.
|
Withdrawn |
2009-10 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
91.220
Construction equipment
|
| ISO 21873-2:2019 |
Building construction machinery and equipment — Mobile crushers — Part 2: Safety requirements and verification |
This document establishes the safety requirements for mobile crushers, as defined in ISO 21873‑1, for crushing rocks or for reprocessing construction materials and capable of re-location between worksites.
It applies to mobile crushers that are either
— self-propelled (mounted on a chassis);
— lorry (truck) mounted;
— or semi-trailer mounted.
It does not apply to
— fixed (stationary) crushers;
— large mining-type movable crushers.
This document deals with significant hazards, hazardous situations and events relevant to mobile crushers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
This document is not applicable to machines which are manufactured before the date of its publication.
|
Published |
2019-05 |
Edition : 2 |
Number of pages : 36 |
Technical Committee |
91.220
Construction equipment
|
| ISO 2860:1983 |
Earth-moving machinery — Minimum access dimensions |
|
Withdrawn |
1983-06 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 2860:1992 |
Earth-moving machinery — Minimum access dimensions |
Specifies the minimum dimensions for: hand, head, body, arm and two-handed access on equipment and machinery as defined in ISO 6165.
|
Published |
1992-02 |
Edition : 4 |
Number of pages : 4 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 2867:1980 |
Earth-moving machinery — Access systems |
|
Withdrawn |
1980-11 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 2867:1989 |
Earth-moving machinery — Access systems |
|
Withdrawn |
1989-12 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 2867:1994 |
Earth-moving machinery — Access systems |
Specifies criteria for access systems - steps, ladders, walkways, platforms, grab rails (handrails), grab handles, guardrails and enclosure entrance and exit openings as they relate to aiding the operator and servicemen in performing their functions on the machinery. Applies to access systems to the operator's station and to service points on earth-moving machinery as defined in ISO 6165 while the machinery is parked in accordance with manufacturer's instructions.
|
Withdrawn |
1994-07 |
Edition : 5 |
Number of pages : 11 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 2867:2006 |
Earth-moving machinery — Access systems |
ISO 2867:2006 specifies criteria for access systems (steps, ladders, walkways, platforms, grab rails/handrails, grab handles, guardrails and enclosure entrance and exit openings) as they relate to aiding the operator, maintenance personnel and service personnel in performing their functions on earth-moving machinery. It is applicable to systems giving access to the operator platform and to routine maintenance points on earth-moving machinery as defined in ISO 6165 parked in accordance with the manufacturer's instructions, and to the 5th to 95th percentile operator dimensions as defined in ISO 3411. It deals with the following significant hazards, hazardous situations and events: slip, trip and fall of persons, and unhealthy postures or excessive effort.
|
Withdrawn |
2006-07 |
Edition : 6 |
Number of pages : 16 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 2867:2006/Cor 1:2008 |
Earth-moving machinery — Access systems — Technical Corrigendum 1 |
|
Withdrawn |
2008-07 |
Edition : 6 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 2867:2011 |
Earth-moving machinery — Access systems |
ISO 2867:2011 specifies criteria for systems that provide access to the operator station and to routine maintenance points on earth-moving machinery as defined in ISO 6165. It is applicable to the access systems (e.g. enclosure openings, platforms, guardrails, handrails and handholds, stairways and steps, ladders) on such machines parked in accordance with the manufacturer's instructions. Its criteria are based on the 5th to 95th percentile operator dimensions as defined in ISO 3411.
The general principles set out in ISO 2867:2011 can be used for the selection of fixed and/or portable access systems for repairs, assembly, disassembly and longer interval maintenance. It deals with the following significant hazards, hazardous situations and events: slip, trip and fall of persons, unhealthy postures and excessive effort.
|
Published |
2011-07 |
Edition : 7 |
Number of pages : 22 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3164:1979 |
Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for the deflection-limiting volume |
|
Withdrawn |
1979-11 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3164:1979/Amd 1:1980 |
Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for the deflection-limiting volume — Amendment 1 |
|
Withdrawn |
1980-12 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3164:1992 |
Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for deflection-limiting volume |
|
Withdrawn |
1992-07 |
Edition : 4 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3164:1995 |
Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume |
Specifies the deflection-limiting volume (DLV) to be used when performing laboratory evaluations of protective structures which provide protection to operators of earth-moving machinery.
|
Withdrawn |
1995-11 |
Edition : 5 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3164:2013 |
Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume |
ISO 3164:2013 specifies the deflection limiting volume (DLV) to be used when performing laboratory evaluations of structures which provide protection to operators of earth-moving machinery as defined in ISO 6165.
|
Published |
2013-05 |
Edition : 6 |
Number of pages : 6 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3164:2013/FDAmd 1 |
Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume — Amendment 1 |
|
Under development |
|
Edition : 6 |
|
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3411:1982 |
Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope |
|
Withdrawn |
1982-12 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3411:1982/Amd 1:1989 |
Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope — Amendment 1 |
|
Withdrawn |
1989-06 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3411:1982/Amd 2:1994 |
Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope — Amendment 2 |
|
Withdrawn |
1994-10 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3411:1995 |
Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope |
Defines the dimensions of male operators of earth-moving machinery and specifies the minimum operating space envelope around the operator enclosures. Replaces the second edition, of which it constitutes a technical revision.
|
Withdrawn |
1995-12 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3411:2007 |
Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope |
ISO 3411:2007 provides the dimensions of operators of earth-moving machinery as defined in ISO 6165 and specifies the minimum normal operating space envelope within the operator enclosures.
|
Published |
2007-07 |
Edition : 4 |
Number of pages : 10 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3449:1980 |
Earth-moving machinery — Falling-object protective structures — Laboratory test and performance requirements |
|
Withdrawn |
1980-02 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3449:1980/Amd 1:1980 |
Earth-moving machinery — Falling-object protective structures — Laboratory test and performance requirements — Amendment 1 |
|
Withdrawn |
1980-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3449:1992 |
Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements |
Establishes a consistent, repeatable means of evaluating characteristics of falling-object protective structures under loading and prescribes performance requirements for these structures under such loading in a representative test. Applies to the following types of operator-controlled machines: a) crawler loaders, wheel loaders and backhoe loaders, b) crawler tractors and wheel tractors, c) graders, d) tractor-scrapers.
|
Withdrawn |
1992-05 |
Edition : 4 |
Number of pages : 8 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3449:2005 |
Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements |
ISO 3449:2004 specifies laboratory tests for measuring the structural characteristics of, and gives performance requirements in a representative test for, falling-object protective structures (FOPS) intended for use on ride-on earth-moving machines as defined in ISO 6165. It is applicable to both FOPS supplied as an integral part of the machine and those supplied separately for attachment to the machine. It is not applicable to FOPS intended for use on landfill compactors, excavators, rollers, trenchers, pipelayers, for the additional seat for operation of an attachment (e.g. attachment backhoe), or on machines with a power rating of less than 15 kW.
|
Published |
2005-09 |
Edition : 5 |
Number of pages : 13 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3450:1975 |
Off-highway earth-moving machinery — Minimum performance criteria for brake systems |
|
Withdrawn |
1975-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3450:1985 |
Earth-moving machinery — Wheeled machines — Performance requirements and test procedures for braking systems |
|
Withdrawn |
1985-10 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3450:1996 |
Earth-moving machinery — Braking systems of rubber-tyred machines — Systems and performance requirements and test procedures |
Specifies minimum performance and test criteria for brake systems to enable uniform assessment of the braking capability of earth-moving machinery which operates on work sites or travels on public roads.
|
Withdrawn |
1996-03 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3450:2011 |
Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems |
ISO 3450:2011 specifies minimum performance requirements and test procedures for the service, secondary and parking brake systems of wheeled and high-speed rubber-tracked earth-moving machines, for the uniform assessment of those brake systems.
It is applicable to the following earth-moving machinery, operating on work sites or in mining, or travelling on public roads: self-propelled, rubber-tyred earth-moving machines, as defined in ISO 6165; self-propelled rollers and landfill compactors, as defined in ISO 6165 and ISO 8811; self-propelled scrapers, as defined in ISO 7133; remote-control machines, as defined in ISO 6165, wheeled or rubber-tracked; derivative earth-moving machines with rubber tyres; earth-moving machines with rubber tracks and a maximum machine speed greater than or equal to 20 km/h.
It is not applicable to pedestrian-controlled earth-moving machinery (see ISO 17063) or crawler earth-moving machines with steel or rubber tracks that travel at less than 20 km/h (see ISO 10265). While purpose-built underground mining machines are not within the scope of ISO 3450:2011, its provisions can generally be applied to those machines with some braking performance modifications and additions, given in an annex.
|
Published |
2011-11 |
Edition : 4 |
Number of pages : 24 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3457:1979 |
Earth-moving machinery — Guards and shields — Definitions and specifications |
|
Withdrawn |
1979-09 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3457:1986 |
Earth-moving machinery — Guards and shields — Definitions and specifications |
Specifies the characteristics of different guards and shields to protect personnel from accidental hazards which may arise during operation and servicing of earth-moving machines due to mechanical, thermal, chemical and electrical causes. Covers both rubber-tyred and track-type off-highway earth-moving machinery of all sizes.
|
Withdrawn |
1986-06 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3457:2003 |
Earth-moving machinery — Guards — Definitions and requirements |
ISO 3457:2002 defines principal terms and specifies requirements for, and characteristics of, guards and other means of protecting personnel from mechanical, fluid or thermal hazards associated with the operation and routine maintenance of earth-moving machinery as defined in ISO 6165, when used as intended by the manufacturer.
|
Published |
2003-05 |
Edition : 4 |
Number of pages : 11 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3471-1:1986 |
Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Part 1: Crawler, wheel loaders and tractors, backhoe loaders, graders, tractor scrapers, articulated steer dumpers |
|
Withdrawn |
1986-06 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3471:1980 |
Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
|
Withdrawn |
1980-09 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3471:1994 |
Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
Establishes a consistent and reproducible means of evaluating the load-carrying characteristics of roll-over protective structures under static loading, and prescribes performance requirements for a representative specimen under such loading. Applies to the following seated design operator-controlled machines as defined in ISO 6165: crawler tractors and loaders, graders, wheeled loaders and wheeled tractors, wheeled industrial tractors, the tractor portion (prime mover) of tractor scrapers, water wagons, etc., rollers and compactors, rigid frame dumpers.
|
Withdrawn |
1994-02 |
Edition : 3 |
Number of pages : 21 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3471:1994/Amd 1:1997 |
Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Amendment 1: Laboratory tests and performance requirements |
|
Withdrawn |
1997-09 |
Edition : 3 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3471:1994/Cor 1:2000 |
Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Technical Corrigendum 1 |
|
Withdrawn |
2000-12 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3471:2008 |
Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
ISO 3471:2008 specifies performance requirements for metallic roll-over protective structures (ROPS) for earth-moving machinery, as well as a consistent and reproducible means of evaluating the compliance with these requirements by laboratory testing using static loading on a representative specimen.
ISO 3471:2008 is applicable to ROPS intended for the following mobile machines with seated operator as defined in ISO 6165 and with a mass greater than or equal to 700 kg: dozer; loader; backhoe loader; dumper; pipelayer; tractor section (prime mover) of a combination machine (e.g. tractor scraper, articulated frame dumper); grader; landfill compactor; roller; trencher.
ISO 3471:2008 is not applicable to training seats or additional seats for operation of an attachment.
|
Published |
2008-08 |
Edition : 4 |
Number of pages : 33 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3471:2008/AWI Amd 1 |
Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Amendment 1 |
|
Under development |
|
Edition : 4 |
|
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3541:1975 |
Earth-moving machinery — Dimensions of fuel filler opening |
|
Withdrawn |
1975-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3541:1985 |
Earth-moving machinery — Dimensions of fuel filler opening |
|
Withdrawn |
1985-09 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 3542:1975 |
Withdrawal of ISO 3542-1975 |
|
Withdrawn |
1975-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4250-3:1987 |
Narrow and wide base off-road tyres and rims — Part 3: Rims |
|
Withdrawn |
1987-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4250-3:1997 |
Earth-mover tyres and rims — Part 3: Rims |
|
Withdrawn |
1997-10 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4250-3:2006 |
Earth-mover tyres and rims — Part 3: Rims |
ISO 4250-3:2006 sets out the designation, contours and dimensions for rims for narrow and wide base off-road tyres primarily intended for earth-moving machinery. All dimensions are given in millimetres and are applicable to the side of the rim which is in contact with the tyre.
|
Withdrawn |
2006-08 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4250-3:2011 |
Earth-mover tyres and rims — Part 3: Rims |
ISO 4250-3:2011 sets out the designation, contours and dimensions for rims for narrow- and wide-base off-road tyres primarily intended for earth-moving machinery.
All dimensions in ISO 4250-3:2011 are given in millimetres and are applicable to the side of the rim which is in contact with the tyre.
Annex A gives details on sealing ring grooves and O-rings for earth-mover rims.
|
Withdrawn |
2011-05 |
Edition : 4 |
Number of pages : 13 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4250-3:2020 |
Earth-mover tyres and rims — Part 3: Rims |
This document sets out the designation, contours and dimensions for rims for narrow- and wide-base off-road tyres primarily intended for earth-moving machinery.
All dimensions in this document are given in millimetres and are applicable to the side of the rim which is in contact with the tyre.
Tyre designations and dimensions, tyre classifications and nomenclature are given in ISO 4250-1, ISO 10571 and ISO 13442.
Annex A gives details on sealing ring grooves and O-rings for earth-mover rims.
|
Published |
2020-09 |
Edition : 5 |
Number of pages : 15 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4510-1:1987 |
Earth-moving machinery — Service tools — Part 1: Common maintenance and adjustment tools |
Lays down the tool groupings commonly used for carrying out on-site, normal maintenance and routine adjustment work on earth-moving machinery as defined in ISO 6165. Table 1 contains suitable tools, which manufacturers should choose for these works. Cancels and replaces the first edition (ISO 4510-1 : 1986), of which it constitutes a minor revision.
|
Published |
1987-10 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4510-2:1986 |
Earth-moving machinery — Service tools — Part 2: Common repair tools — Mechanical pullers and pushers |
|
Withdrawn |
1986-06 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4510-2:1996 |
Earth-moving machinery — Service tools — Part 2: Mechanical pullers and pushers |
Gives guidance for the types, general requirements and main nominal dimensions of mechanical pullers (used for pulling gears and bearings), attachments and adaptors used for carrying out repair work.
|
Published |
1996-11 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4510:1976 |
Earth-moving machinery — Maintenance and adjustment tools |
|
Withdrawn |
1976-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 4557:1982 |
Earth-moving machinery — Excavators — Operator's controls |
|
Withdrawn |
1982-08 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5004:1981 |
Earth-moving machinery — Method of test for the measurement of tool movement time |
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5004:1987 |
Earth-moving machinery — Test method for measurement of tool movement time |
|
Withdrawn |
1987-04 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5005:1977 |
Earth-moving machinery — Method for locating the centre of gravity |
Particularly in the case of earth-moving machinery, the position of the centre of gravity will depend upon the nature and position of any attachments or ancillary equipment with which the item is fitted. This Standard specifies a method for determining the co-ordinates of the centre of gravity of earth-moving machinery such as tractors, loaders, dumpers and graders in any condition of loading or position of attachments.
|
Published |
1977-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5006-1:1991 |
Earth-moving machinery — Operator's field of view — Part 1: Test method |
Specifies a method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. Annex A is for information only.
|
Withdrawn |
1991-10 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5006-2:1993 |
Earth-moving machinery — Operator's field of view — Part 2: Evaluation method |
Specifies a method for evaluating the maskings which may be present on the perimeter. Does not consider evaluation of maskings which may be present with operational movement of working tools. Applies to earth-moving machinery which has a specific operator's station.
|
Withdrawn |
1993-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5006-3:1993 |
Earth-moving machinery — Operator's field of view — Part 3: Criteria |
Specifies visibility acceptance criteria for earth-moving machinery; applies to earth-moving machinery which has a specific operator's station.
|
Withdrawn |
1993-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5006:2006 |
Earth-moving machinery — Operator's field of view — Test method and performance criteria |
ISO 5006:2006 specifies a static test method for determining and evaluating the operator's visibility on a rectangular 1 m boundary close around the machine and on a 12 m visibility test circle.
ISO 5006:2006 applies to wheel loaders, skid steer loaders, crawler loaders, backhoe loaders, wheel excavators, crawler excavators, rigid-frame dumpers, articulated frame dumpers, dumpers (front body), crawler dozers, graders, soil and landfill compactors and rollers that are defined in ISO 6165 and that have a specific seated operator's position. For machines not mentioned, including larger machines, derivative earth-moving machines and other types of earth-moving machines, the visibility test procedures can be used.
ISO 5006:2006 applies to earth-moving machines for operation on work sites and for travelling on public roads.
|
Withdrawn |
2006-11 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5006:2006/Cor 1:2008 |
Earth-moving machinery — Operator's field of view — Test method and performance criteria — Technical Corrigendum 1 |
|
Withdrawn |
2008-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5006:2017 |
Earth-moving machinery — Operator's field of view — Test method and performance criteria |
ISO 5006:2017 specifies a static test method for determining and evaluating the operator's field of view on a rectangular boundary around the machine and on a 12 m visibility test circle (VTC).
It is applicable to the earth-moving machines as defined in ISO 6165 that have a seated operator, and which are intended to operate on work sites and travel on public roads. It provides visibility performance criteria for machines up to the maximum operating mass according to ISO 6016, depending on the type of machine family listed in Table 1. For those machines not listed ? including larger machines, derivative and other types of earth-moving machinery ? the visibility test procedures can be used along with the risk assessment process defined in 10.4.
|
Published |
2017-04 |
Edition : 2 |
Number of pages : 29 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5010:1984 |
Earth-moving machinery — Rubber-tyred machines — Steering capability |
|
Withdrawn |
1984-08 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5010:1992 |
Earth-moving machinery — Rubber-tyred machines — Steering requirements |
Specifies steering system tests and performance criteria for evaluating the steering capability of rubber-tyred self-propelled earth-moving machines having a machine speed greater than 20 km/h. Applies to tractors, loaders, back-hoe loaders, excavators, dumpers, tractor-scrapers and graders. For the present, rollers, compactors and pipelayers are excluded.
|
Withdrawn |
1992-10 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5010:2007 |
Earth-moving machinery — Rubber-tyred machines — Steering requirements |
ISO 5010:2007 specifies steering system tests and performance criteria for evaluating the steering capability of rubber-tyred, self-propelled earth-moving machines having a machine speed, determined in accordance with ISO 6014, greater than 20 km/h.
It is applicable to dozers, loaders, back-hoe loaders, excavators, dumpers, scrapers and graders equipped with either manual steering, power-assisted steering or fully powered steering systems as defined in ISO 6165.
|
Withdrawn |
2007-06 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5010:2019 |
Earth-moving machinery — Wheeled machines — Steering requirements |
This document specifies steering system tests and performance criteria for evaluating the steering capability of wheeled, ride-on earth-moving machinery as defined in ISO 6165:2012. Wheeled machines include machines equipped with wheels, one or more drums or crawler wheel assemblies.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant to wheeled machines, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer:
— mechanical hazards;
— ergonomic hazards;
— hazards due to maintenance;
— hazards due to the control system;
— hazards related to travelling function.
Functional safety of the steering system is not covered in this document.
This document is not applicable to wheeled machines manufactured before the date of its publication.
|
Published |
2019-11 |
Edition : 4 |
Number of pages : 18 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 5353:1978 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point |
|
Withdrawn |
1978-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
;
65.060
Agricultural machines, implements and equipment
|
| ISO 5353:1978/Amd 1:1981 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point — Amendment 1 |
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
;
65.060
Agricultural machines, implements and equipment
|
| ISO 5353:1978/Amd 2:1984 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point — Amendment 2 |
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
;
65.060
Agricultural machines, implements and equipment
|
| ISO 5353:1995 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point |
States a method and the device for use in determining the position of the seat index point (SIP) for any kind of seat designed for earth-moving machinery as defined in ISO 6165, and tractors and machinery for agriculture and forestry as defined in ISO 3339-0.
|
Published |
1995-12 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
53.100
Earth-moving machinery
;
65.060.01
Agricultural machines and equipment in general
|
| ISO 5998:1978 |
Earth-moving machinery — Rated operating load for crawler and wheel loaders |
|
Withdrawn |
1978-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6393:1985 |
Acoustics — Measurement of airborne noise emitted by earth-moving machinery — Method for determining compliance with limits for exterior noise — Stationary test condition |
|
Withdrawn |
1985-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
;
17.140.20
Noise emitted by machines and equipment
|
| ISO 5998:1986 |
Earth-moving machinery — Rated operating load for crawler and wheel loaders |
The rated operating load is based only on the machine's lifting capacity, static forward tipping load, and specified operating conditions. The actual operating load, practical on a specific job for a given machine, can vary from the rated operating load on the basis of the job conditions.
|
Withdrawn |
1986-06 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6011:1978 |
Earth-moving machinery — Operating instrumentation |
|
Withdrawn |
1978-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6011:1987 |
Earth-moving machinery — Operating instrumentation |
Specifies the information to be obtained from the instruments on the instrument panel by the operator in his normal position. Specifies also the arrangement and colour distinction of this instrumentation in order to make it possible to operate the machine in a safe and proper way and to maintain it in good operating condition.
|
Withdrawn |
1987-05 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6011:2003 |
Earth-moving machinery — Visual display of machine operation |
ISO 6011:2003 specifies the machine operation functional information to be presented by the visual displays of earth-moving machinery for a seated operator. It is applicable to earth-moving machinery as defined in ISO 6165.
|
Published |
2003-11 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO/DIS 6011 |
Earth-moving machinery — Visual display of machine operation |
|
Under development |
|
Edition : 4 |
Number of pages : 9 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6012:1982 |
Earth-moving machinery — Service instrumentation |
|
Withdrawn |
1982-06 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6012:1989 |
Earth-moving machinery — Service instrumentation |
|
Withdrawn |
1989-10 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6012:1997 |
Earth-moving machinery — Service instrumentation |
|
Published |
1997-03 |
Edition : 4 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6014:1979 |
Earth-moving machinery — Determination of ground speed |
|
Withdrawn |
1979-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6014:1986 |
Earth-moving machinery — Determination of ground speed |
Specifies a method of determining the speed of both wheeled and track-laying earth-moving machinery. The test method specified may be used for many purposes; for each individual purpose the condition of the machine, for example laden or unladen, is to be stated in the test report.
|
Published |
1986-06 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
53.100
Earth-moving machinery
|
| ISO 6015-1:1986 |
Earth-moving machinery — Hydraulic excavators — Part 1: Methods of measuring tool forces |
|
Withdrawn |
1986-07 |
Edition : 1 |
|
Technical Committee |
53.100
Earth-moving machinery
|