| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 3416:1986 |
Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading |
Intended to simulate the effect of the pressure exerted by a chair leg for a short period. Applicable to all textile floor coverings of uniform thickness and construction. Not applicable to other textile floor coverings unless the areas of different thickness or construction can be separately tested. The determination of thickness loss after prolonged, heavy static loading see ISO 3416. - Replaces the first edition (ISO 3415-1975), the clauses 4 and 7 of which have been technically revised.
|
Published |
1986-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4760:2022 |
Laminate flooring — Topical moisture resistance — Assembled joint |
This document specifies a test method to evaluate moisture resistance to surface water exposure of a joined, floating, laminate flooring assembly/element. This document also establishes criteria for rating and assessing performance.
|
Published |
2022-05 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4918:2009 |
Resilient, textile and laminate floor coverings — Castor chair test |
ISO 4918:2008 specifies methods for assessment of the wear behaviour of textile floor coverings, assessment of the change in colour (glossing) of needled floor coverings without a pile, assessment of the general structural integrity of textile floor coverings, and determination of susceptibility to surface crazing, construction integrity and joint stability for resilient or laminate floor covering, including joints.
The methods involve subjecting the test piece to the movement of a castor chair.
|
Withdrawn |
2009-09 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TR 4918:1990 |
Textile floor coverings — Determination of wear — Castor chair test |
|
Withdrawn |
1990-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4918:2016 |
Resilient, textile and laminate floor coverings — Castor chair test |
ISO 4918:2016 specifies methods for determining the change of appearance and stability of a textile floor covering or any damage caused by detachment of layers, opening of joints, or crazing of a resilient or laminate floor covering under the movement of a castor chair.
|
Published |
2016-03 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4918:2016/Amd 1:2018 |
Resilient, textile and laminate floor coverings — Castor chair test — Amendment 1: Surface hardness |
|
Published |
2018-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4919:1978 |
Textile floor coverings — Determination of tuft withdrawal force |
Applicable to all carpets and textile floor coverings with a cut or loop pile yarn structure. One end of a tuft is gripped or a loop is hooked, and the maximum force registered during the removal process is recorded. One possible form of flat horizontal mounting is illustrated in an added figure.
|
Withdrawn |
1978-10 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 4919:2012 |
Carpets — Determination of tuft withdrawal force |
ISO 4919:2012 specifies a method for determination of tuft withdrawal force and is applicable to all carpets with a cut or loop pile yarn structure.
|
Published |
2012-08 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 5086:1977 |
Textile floor coverings — Hand-knotted carpets — Sampling and selection of areas of test |
The method specifies the sampling (with figure) and defines the areas for the physical testing and chemical analysis of hand-knotted carpets. It is applicable to most carpets in which the knots are tied by finger or by hook. Each carpet should be tested separately.
|
Published |
1977-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 9239-1:1997/Cor 1:1997 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 1 |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/TR 6131:1986 |
Textile floor coverings — Tetrapod Walker apparatus — Constructional details and instructions for use |
Applicable to all textile floor coverings with a thickness not greater than 20 mm. The tetrapod comprises a metal casting with four legs each of which has a polyurethane foot at the end. The top of each foot is hemispherical. The measurements of the hardness of the tetrapod food top is described in Annex A. The multi-drum system, as illustrated in Annex B, may be used, provided that it meets all the requirements of this Technical Report.
|
Withdrawn |
1986-06 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6347:1989 |
Textile floor coverings — Consumer information |
Applicable to textile floor coverings of all types. Specifies the technical matters forming the basis for the provision of information, at the point of sale, for the guidance of the consumer prior to and after the purchase of a textile floor covering. This information shall be provided with the textile floor coverings at all stages from manufacturer to consumer.
|
Withdrawn |
1989-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6347:2004 |
Textile floor coverings — Consumer information |
ISO 6347:2004 specifies the technical subjects that form the basis for the provision of information, at the point of sale, for the guidance of the consumer prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.
|
Withdrawn |
2004-09 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6347:2017 |
Textile floor coverings — Consumer information |
ISO 6347:2017 specifies the technical subjects that form the basis for the provision of information, at the point of sale, for consumer guidance prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.
|
Published |
2017-02 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
97.020
Home economics in general
;
97.150
Floor coverings
|
| ISO 6356:2000 |
Textile floor coverings — Assessment of static electrical propensity — Walking test |
|
Withdrawn |
2000-03 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TR 6356:1982 |
Textile floor coverings — Assessment of static electrical propensity — "Walking" test |
|
Withdrawn |
1982-10 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6356:2012 |
Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
ISO 6356:2012 specifies a method of evaluating the electrostatic propensity of textile and laminate floor coverings under controlled conditions. Since the potential generated varies with humidity, shoe materials, walk surface and individuals' mannerisms, the values generated by this test will not necessarily duplicate actual field experience, but will provide a relative comparison of the performance of different surfaces.
For classification purposes and in cases of dispute, the measurement procedure specified in ISO 6356:2012 can be used under controlled conditions specified in the relevant classification standard or agreed between disputing parties. There may be occasions where measurements are required under non-controlled conditions, e.g. in situ measurements on installed floor coverings. The principle of measurement using the equipment specified in ISO 6356:2012 can be used to make measurements, either with the standard footwear specified or with specific footwear relevant to the end use.
|
Published |
2012-07 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
97.150
Floor coverings
|
| ISO 6925:1982 |
Textile floor coverings — Burning behaviour — Tablet test at ambient temperature |
The method established applies to all types of textile floor coverings independent of their construction or their fibre composition. The method may also be applicable to unfinished material. In this case, the result does not indicate the behaviour of the material in the condition in which is used.
|
Published |
1982-03 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 8543:1986 |
Textile floor coverings — Methods for determination of mass |
|
Withdrawn |
1986-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 8543:1998 |
Textile floor coverings — Methods for determination of mass |
|
Withdrawn |
1998-05 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 8543:2020 |
Textile floor coverings — Methods for determination of mass |
This document specifies methods for the determination of the total mass per unit area, total pile mass per unit area, and mass of pile per unit area above the substrate, and for the calculation of measured surface pile density and measured pile fibre volume ratio of textile floor coverings.
|
Published |
2020-06 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 9239-1:1997 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source |
|
Withdrawn |
1997-05 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9239-1:1997/Cor 2:1998 |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 2 |
|
Withdrawn |
1998-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9239-1:2002 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source |
|
Withdrawn |
2002-01 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9239-1:2010 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source |
ISO 9239-1:2010 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.
This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
ISO 9239-1:2010 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
|
Published |
2010-06 |
Edition : 3 |
Number of pages : 25 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO/CD 9239-1 |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source |
This part of ISO 9239 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Annex A gives details of assessing the smoke development, when required.
This method is applicable to all types of flooring, e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Information on the precision of the test method is given in Annex B.
|
Under development |
|
Edition : 4 |
|
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9239-2:2002 |
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2 |
ISO 9239-2 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover).
This method is applicable to all types of flooring such as textile carpets, cork, wood, rubber and plastic coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay, or other changes of the flooring may affect test results.
This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
|
Published |
2002-12 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
97.150
Floor coverings
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 9405:2001 |
Textile floor coverings — Assessment of changes in appearance |
|
Withdrawn |
2001-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TR 9405:1990 |
Textile floor coverings — Assessment of changes in appearance |
|
Withdrawn |
1990-09 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 9405:2015 |
Textile floor coverings — Assessment of changes in appearance |
ISO 9405:2015 describes the procedures for assessing the overall change in appearance of textile floor coverings caused by Vettermann drum and hexapod tumbler testers according to ISO 10361 and ISO 4918.
|
Published |
2015-02 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10361:2000 |
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers |
|
Withdrawn |
2000-07 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10361:2015 |
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
ISO 10361:2015 describes procedures that use the mechanical action of a Vettermann drum or a hexapod tumbler tester to produce changes in appearance (surface structure and colour) to all types of textile floor coverings. It does not include pilling or colour changes due to other actions.
Changes produced by these drum testers are assessed in accordance with the applicable assessment standard.
|
Published |
2015-02 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10575:2012 |
Resilient floor coverings — Specification for rubber sheet floor coverings with backing |
ISO 10575:2012 specifies the characteristics of rubber sheet floor coverings with backing.
ISO 10575:2012 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10577:2012 |
Resilient floor coverings — Specification for rubber sheet floor coverings without backing |
ISO 10577:2012 specifies the characteristics of rubber sheet floor coverings without backing.
ISO 10577:2012 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service.
|
Published |
2012-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10580:2010 |
Resilient, textile and laminate floor coverings — Test method for volatile organic compound (VOC) emissions |
ISO 10580:2010 specifies a general laboratory test method for determination of the area-specific emission rate of volatile organic compounds (VOC) and/or the vapour-phase VOC concentration under defined climate conditions.
ISO 10580:2010 describes emission test chambers used for the determination of the emission of volatile organic compounds from resilient, textile and laminate floor coverings.
|
Published |
2010-05 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10581:2011 |
Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications |
ISO 10581:2011 specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10581:2011 includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. ISO 10581:2011 also specifies requirements for marking.
|
Withdrawn |
2011-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10581:2019 |
Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications |
This document specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products can contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, this document also includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking.
|
Published |
2019-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10582:2010 |
Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor coverings — Specification |
ISO 10582:2010 specifies the characteristics of non-cushioned, heterogeneous floor coverings, based on poly(vinyl chloride) (PVC), supplied in either tile or roll form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10582:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking.
|
Withdrawn |
2010-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10582:2017 |
Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor covering — Specifications |
ISO 10582:2017 specifies the characteristics of non-cushioned, heterogeneous floor coverings, consisting of poly(vinyl chloride) (PVC), supplied in either tile or plank or roll form. Products can contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking.
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10595:2010 |
Resilient floor coverings — Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles — Specification |
ISO 10595:2010 specifies the characteristics of semi-flexible/vinyl composition floor tiles based on poly(vinyl chloride) (PVC) binder and supplied in tile form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10595:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking
|
Published |
2010-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10833:1992 |
Textile floor coverings — Determination of mechanical damage at a cut edge — Modified Vettermann drum tester method |
The principle of the method is randomly rolling a metal ball with six rubber studs inside a rotating drum which is lined with the specimens. The specimens have an inclined longitudinal cut down the centre. After fatiguing, the mechanical damage of the cut edges is assessed.
|
Withdrawn |
1992-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10833:2001 |
Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test |
|
Withdrawn |
2001-07 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10833:2017 |
Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test |
ISO 10833:2017 specifies a method to determine the susceptibility of textile floor coverings to mechanical damage at cut edges.
It is applicable to all textile floor coverings both as sheet materials and as tiles.
|
Published |
2017-05 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10834:1992 |
Textile floor coverings — Non-destructive measurement of pile thickness above the backing — WRONZ gauge method |
The method is based on determination by measuring the distance between the planes of the pile surface located under a standard pressure and the plane of the backing surface located under a standard loading. This method and that of ISO 1766 may not give identical results. In case of dispute or where maximum accuracy is required, thickness shall be determined by the method of ISO 1766.
|
Published |
1992-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10874:2009 |
Resilient, textile and laminate floor coverings — Classification |
ISO 10874:2009 establishes a classification system for resilient, textile and laminate floor coverings. The classification is based on practical requirements for areas of use and intensity of use and is linked to the requirements specified in the relevant International Standard for each type of floor covering.
ISO 10874:2009 is also intended to provide guidance for manufacturers, specifiers and consumers, to enable them to choose the appropriate class of floor covering for any given area of use or specific room.
|
Published |
2009-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10874:2009/Amd 1:2020 |
Resilient, textile and laminate floor coverings — Classification — Amendment 1: Elimination of class 22+ |
|
Published |
2020-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10965:1998 |
Textile floor coverings — Determination of electrical resistance |
|
Withdrawn |
1998-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10965:1998/Cor 1:1999 |
Textile floor coverings — Determination of electrical resistance — Technical Corrigendum 1 |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 10965:2011 |
Textile floor coverings — Determination of electrical resistance |
ISO 10965:2011 describes a laboratory method for the determination of the electrical resistance of textile floor coverings. The method includes both horizontal and vertical measurements.
|
Published |
2011-07 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11377:1997 |
Textile floor coverings — Floor soiling — Test site set-up and soiling evaluation |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11378-1:2000 |
Textile floor coverings — Laboratory soiling tests — Part 1: Kappasoil test |
This part of ISO 11378 specifies a method for assessing the propensity of textile floor coverings to soiling using an
artificial soil composition.
The scope of this test method can be extended to assess the efficiency of cleaning chemicals, and cleaning
equipment (see annex A).
|
Published |
2000-04 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11378-2:2001 |
Textile floor coverings — Laboratory soiling tests — Part 2: Drum test |
|
Published |
2001-05 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11378-2:2001/Amd 1:2017 |
Textile floor coverings — Laboratory soiling tests — Part 2: Drum test — Amendment 1 |
|
Published |
2017-06 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11379:1997 |
Textile floor coverings — Laboratory cleaning procedure using spray extraction |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11379:2009 |
Textile floor coverings — Laboratory cleaning procedure using spray extraction |
ISO 11379:2009 describes a laboratory-scale textile-floor-covering cleaning procedure using a spray-extraction technique. ISO 11379:2009 is applicable to all kinds of textile floor coverings, both machine-made and hand-made.
|
Published |
2009-02 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11638:2012 |
Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification |
ISO 11638:2012 specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile. Such products can contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 11638:2012 includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
ISO 11638:2012 also specifies requirements for marking.
|
Withdrawn |
2012-08 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11638:2020 |
Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification |
This document specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile and plank. Such products can contain a transparent, non PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
It also specifies requirements for marking.
|
Published |
2020-03 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11856:2014 |
Textile floor coverings — Test methods for the determination of fibre bind using a Modified Martindale Machine |
The method in ISO 11856:2014 uses a modified Martindale fabric abrasion machine to assess fibre loss in pile carpets by weighing the amount of fibre removed at specified intervals. It is applicable to all types of cut pile, wool-rich textile floor coverings.
|
Withdrawn |
2014-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO/PAS 11856:2003 |
Textile floor coverings — Test methods for the determination of fibre bind |
ISO PAS 11856 describes the following six methods for determining fibre bind of textile floor coverings. Each test method states the type(s) of textile floor coverings for which the test is applicable.
Lisson Tretrad test:Method A for mass loss for synthetic cut pile carpets;Method B for appearance change of synthetic loop pile carpets.Modified Martindale machine test for mass loss/appearance change.Hexapod tumbler test for mass loss.Japanese fibre bind test.Usometer test for fuzzing and pilling of loop pile carpets.Fiberlock tester test for fuzzing and pilling of loop pile carpets.
|
Withdrawn |
2003-01 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11857:1999 |
Textile floor coverings — Determination of resistance to delamination |
This International Standard describes a method for the determination of the force required to separate the plies of
textile floor coverings. It is applicable to all types of textile floor coverings with a secondary or foam backing.
The results obtained by this method are useful as a control of production but cannot be considered to be a reliable
indication of in-use performance.
|
Published |
1999-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11858:1999 |
Textile floor coverings — Determination of friability of attached foams |
1.1 This International Standard specifies a procedure for assessing the friability of foam backings attached to
textile floor coverings.
1.2 This International Standard is not suitable for evaluating the propensity of a foam backing to break down after
installation, since such break-down is invariably due to a combination of flexing fatigue and oxidation, factors which
are not covered in this International Standard.
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11859:1999 |
Textile floor coverings — Pure wool, hand-knotted pile carpets — Specification |
This International Standard specifies requirements for hand-knotted carpets produced from pure wool, of
dimensions agreed between the purchaser and the supplier.
|
Published |
1999-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11860:1999 |
Textile floor coverings — Jute carpet backing fabric — Specification |
This International Standard specifies requirements for primary and secondary jute carpet backing fabrics.
|
Published |
1999-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 11861:1999 |
Textile floor coverings — Coir mats — Types and specification |
This International Standard specifies the requirements for mats produced from coir fibre, with or without pile.
|
Published |
1999-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12951:1999 |
Textile floor coverings — Determination of mass loss using the Lisson test |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12951:2015 |
Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine |
ISO 12951:2015 specifies four methods of test of textile floor coverings (with or without an underlay, see Clause 9) using the Lisson Tretrad machine.
- test A: determination of mass loss of textile floor coverings, also used to assess fibre bind of synthetic pile carpets;
- test B: determination of stair nosing appearance change of textile floor coverings;
- test C: determination of fibre bind on synthetic loop pile carpets;
- test D: determination of fibre bind (hairiness) on needled floor coverings and floor coverings without pile.
|
Withdrawn |
2015-09 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12951:2020 |
Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine |
This document specifies four methods of test for textile floor coverings (with or without an underlay, see Clause 9) using the Lisson Tretrad machine.
— test A: determination of mass loss of textile floor coverings, also used to assess fibre bind of synthetic pile carpets;
— test B: determination of stair nosing appearance change of textile floor coverings;
— test C: determination of fibre bind on synthetic loop pile carpets;
— test D: determination of fibre bind (hairiness) on needled floor coverings and floor coverings without pile.
|
Published |
2020-05 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
97.150
Floor coverings
|
| ISO 13746:2000 |
Textile floor coverings — Guidelines for installation and use on stairs |
|
Withdrawn |
2000-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 13746:2019 |
Textile floor coverings — Guidelines for installation and use on stairs |
This document provides recommendations for the installation and use of textile floor coverings on stairs for both residential/domestic and contract/commercial purposes. It covers all products composed of textile material with a pile or non-pile use surface including the use of such products in tile form.
This document is applicable only to carpets that are intended to be installed without the use of protective stair nosings. For carpets that are intended to be installed using protective stair nosings, the overall use class determines the stair suitability.
NOTE 1 The use of stair nosings/edgings in public areas is often the subject of local bye-laws and legislations.
NOTE 2 In many split-level dwellings, a room can have one or two steps between different levels. This situation differs from a stairway in several important respects:
— the steps are usually wider and therefore traffic intensity in any one place is usually lower;
— the carpet can be bent over steps in either the machine direction or the across-machine direction. On a stairway, it is normal practice to lay the carpet with the pile lying down the stairs.
|
Published |
2019-06 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 13747:1999 |
Textile floor coverings — Determination of size, squareness and straightness of edge of tiles |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 13750:2000 |
Textile floor coverings — Determination of resistance to staining by acid food colours |
This International Standard specifies the procedure for assessing textile floor coverings for resistance to staining by
acid food colours. The apparent intensity of the stain will vary with the colour of the floor covering.
|
Published |
2000-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO/CD 14486 |
Laminate floor coverings — Specification |
This International Standard specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking and packaging.
Laminate floor coverings are generally designed for floating installations for interior use and are considered for domestic and commercial levels of use, including domestic kitchens. This document does not specify requirements relating to the use in areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas. In general laminate floor coverings can only be used in those areas when authorized by the manufacturer and under conditions described in the manufacturer's installation guidelines.
|
Under development |
|
Edition : 1 |
|
Technical Committee |
97.150
Floor coverings
|
| ISO 14486:2012 |
Laminate floor coverings — Specification |
ISO 14486:2012 specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.
|
Published |
2012-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 16581:2014 |
Resilient and laminate floor coverings — Determination of the effect of simulated movement of a furniture leg |
ISO 16581:2014 specifies a method for determining the resistance of an installed resilient or laminate floor covering to the mechanical stress resulting from the simulated movement of a furniture leg.
|
Published |
2014-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 16905:2015 |
Resilient floor coverings — Specification for rubber floor covering — Tile/Plank |
ISO 16908:2015 specifies the characteristics of rubber floor tile/planks.
ISO 16908:2015 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service.
ISO 16908:2015 specifies rubber floor tile/planks for applications involving the use of normal footwear and does not cover applications where special footwear, such as spiked shoes, may be involved.
|
Published |
2015-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 16906:2015 |
Resilient floor coverings — Determination of seam strength |
ISO 16906:2015 specifies a method for determining the strength of the seams of resilient floor coverings when welded in accordance with the manufacturer's instructions.
|
Published |
2015-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 17504:1999 |
Textile floor coverings — Determination of wool fibre integrity using an abrasion machine |
This International Standard specifies a method for the determination of fibre damage in the pile of textile floor
coverings having a pile material of at least 80 % wool.
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 17984:2014 |
Machine-made textile floor coverings — Determination of dimensional changes after exposure to heat and/or water |
ISO 17984:2014 specifies procedures for the determination of both planar and out-of-plane dimensional changes that take place when machine-made textile floor coverings are subjected to heat, water, or varied heat and water conditions.
The following methods are applicable to all machine-made textile floor coverings including those produced in tile form: Method 1, Determination of dimensional changes after exposure to heat; Method 2, Determination of dimensional changes after immersion in water; Method 3, Determination of dimensional changes due to the effects of varied heat and water conditions; and Method 4, Dimensional changes out of the plane.
|
Withdrawn |
2014-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO/PAS 17984:2001 |
Machine-made textile floor coverings — Determination of dimensional changes after exposure to heat and/or water |
|
Withdrawn |
2001-06 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.150
Floor coverings
|
| ISO 18167:2020 |
Textile floor coverings — Installation practices — General |
This document sets out the requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor surfaces together with the procedures that are to be adopted where textile floor coverings are laid over various types of subfloors and underlays and where subfloor heating units are installed.
NOTE This document addresses needle insertion tufted, woven, fusion bonded, fibre bonded, knitted, non-woven, felted, and flocked textile floor coverings.
|
Published |
2020-06 |
Edition : 1 |
Number of pages : 41 |
Technical Committee |
97.150
Floor coverings
|
| ISO/PAS 18167:2014 |
Textile floor coverings — Installation practices — General |
ISO/PAS 18167:2014 sets out the requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor surfaces together with the procedures that are to be adopted where textile floor coverings are laid over various types of subfloors and underlays and where subfloor heating units are installed.
NOTE This International Standard addresses needle insertion tufted, woven, fusion bonded, fibre bonded, knitted, non-woven, felted, and flocked textile floor coverings.
The objective of this International Standard is to provide the contractors, manufacturers, suppliers, and purchasers of textile floor coverings and others, for example, technical educators, with procedures to enable the provision of correctly installed textile floor coverings.
|
Withdrawn |
2014-12 |
Edition : 1 |
Number of pages : 42 |
Technical Committee |
97.150
Floor coverings
|
| ISO 18168:2015 |
Textile floor coverings — Colour fastness to shampooing |
ISO 18168:2015 describes a method for determining the colour fastness of textile floor coverings and yarns, loose fibres and tufts extracted from textile floor coverings, to the action of a reference shampoo solution.
|
Published |
2015-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 19322:2018 |
Resilient floor coverings — Specification for floor coverings based on thermoplastic polymers |
ISO 19322:2018 specifies the characteristics for resilient floor coverings based upon thermoplastic polymers, supplied either in roll, plank or tile form.
To encourage the consumer to make an informed choice, this document includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.
This specification does not apply to floor coverings specified in ISO 10581, ISO 10582, ISO 10595, ISO 11638, ISO 10575, ISO 10577, ISO 24011 and ISO 26986.
|
Published |
2018-03 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.150
Floor coverings
|
| ISO 20251:2016 |
Textile floor coverings — Water impermeability test |
ISO 20251:2016 specifies a laboratory test method for determining the water impermeability of textile floor coverings.
This method cannot be used to characterize a wall-to-wall installation of textile floor covering tiles.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.150
Floor coverings
|
| ISO 20326:2016 |
Resilient floor coverings — Specification for floor panels/assembly for loose laying |
ISO 20326:2016 specifies requirements and test methods for floor panels/assembly for domestic and commercial levels of use, which have surface layers consisting of resilient floor covering.
ISO 20326:2016 is not applicable to heterogeneous polyvinyl chloride floor panels/assembly for floating installation covered by ISO 10582 or to floor panels/assembly that are subject to frequent wetting, such as bathrooms, laundry rooms and saunas.
|
Published |
2016-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.150
Floor coverings
|
| ISO 20326:2016/Amd 1:2020 |
Resilient floor coverings — Specification for floor panels/assembly for loose laying — Amendment 1: Requirements depending on the substrate |
|
Published |
2020-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 21629-1:2021 |
Bamboo floorings — Part 1: Indoor use |
This document specifies the technical requirements and test methods for indoor bamboo flooring for internal use.
This document also specifies handling, storage, packaging and marking requirements.
It is applicable to unfinished and finished indoor bamboo flooring. This includes laminated bamboo flooring, bamboo scrimber flooring, bamboo - wood composite flooring, and flattened bamboo flooring.
|
Published |
2021-06 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.150
Floor coverings
|
| ISO 21629-2:2022 |
Bamboo floorings — Part 2: Outdoor use |
This document specifies the technical requirements, test methods and requirements for the handling, storage, packaging and marking of outdoor bamboo flooring.
It is applicable to outdoor bamboo flooring including bamboo laminated flooring and bamboo scrimber flooring
|
Published |
2022-08 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TS 21868:2021 |
Textile floor coverings — State of the art and guidance on maintenance and cleaning |
This document specifies guidelines for the development of specific textile floor covering maintenance and cleaning standards, procedures and criteria to reflect locally specific conditions. This document specifies the factors which are likely to impact the final results of textile floor covering cleaning, defining maintenance and cleaning terms to highlight differences. It establishes low-cost, non-residue and environmentally-friendly guidance for textile floor covering maintenance and cleaning under the premise of maximizing the use value of textile floor covering.
|
Withdrawn |
2021-06 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO/TS 21868:2023 |
Textile floor coverings — State of the art on maintenance and cleaning |
This document gives guidelines for the development of specific textile floor covering maintenance and cleaning standards, procedures and criteria to reflect local specific conditions. This document specifies the factors which will impact the final results of textile floor covering cleaning, defining maintenance and cleaning terms to highlight differences. It establishes textile floor covering maintenance and cleaning as achieving a low-cost, non-residue and environmentally friendly cleaning under the premise of maximizing the use value of textile floor covering.
|
Published |
2023-02 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23996:2007 |
Resilient floor coverings — Determination of density |
ISO 23996:2007 describes two methods for determining the density of homogeneous resilient floor coverings and solid layers of other resilient floor coverings.
|
Published |
2007-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23997:2007 |
Resilient floor coverings — Determination of mass per unit area |
ISO 23997:2007 describes a method for determining the mass per unit area of a resilient floor covering.
|
Published |
2007-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23999:2008 |
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat |
ISO 23999:2008 specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets and tiles, in linear dimensions after exposure to heat.
|
Withdrawn |
2008-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23999:2018 |
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat |
This document specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets, tile or planks after exposure to heat.
|
Withdrawn |
2018-07 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.150
Floor coverings
|
| ISO 23999:2021 |
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat |
This document specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets, tiles or planks after exposure to heat.
|
Published |
2021-11 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24011:2009 |
Resilient floor coverings — Specification for plain and decorative linoleum |
ISO 24011:2009 specifies the characteristics of plain and decorative linoleum, supplied as either tiles or rolls.
To encourage the consumer to make an informed choice, ISO 24011:2009 includes a classification system based on the intensity of use, which shows where resilient floor coverings provide satisfactory service.
The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on poly(vinyl chloride) or rubber. Such materials are not included in ISO 24011:2009.
|
Published |
2009-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24334:2006 |
Laminate floor coverings — Determination of locking strength for mechanically assembled panels |
ISO 24334:2006 specifies a method for the determination of the locking strength of joints between laminate floor covering panels, which are assembled with both vertical and horizontal mechanical locking systems.
|
Withdrawn |
2006-08 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24334:2014 |
Laminate floor coverings — Determination of locking strength for mechanically assembled panels |
ISO 24334:2014 specifies a method for the determination of the locking strength of joints between laminate floor covering panels which are assembled with both vertical and horizontal mechanical locking systems.
|
Withdrawn |
2014-12 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24334:2019 |
Laminate floor coverings — Determination of locking strength for mechanically assembled panels |
This document specifies a method for determination of the locking strength of joints between laminate floor covering panels which are assembled with both vertical and horizontal mechanical locking systems.
NOTE This method is also applicable to other mechanically assembled panels, e.g. modular multilayer floorings.
|
Published |
2019-07 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24335:2006 |
Laminate floor coverings — Determination of impact resistance |
ISO 24335:2006 specifies how to determine the impact resistance of laminate floor covering elements. The test described measures the ability of the surface layer to withstand impact from both small and large objects dropped on the floor covering. The testing is destructive by means of the impact on the surface layer from one small and one larger steel ball simulating different scenarios. The force of the small steel ball and the drop height of the larger steel ball are used to define the ability for a laminate floor covering element to withstand impact.
|
Withdrawn |
2006-03 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.150
Floor coverings
|