| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 24335:2022 |
Laminate floor coverings — Determination of impact resistance |
This document specifies how to determine the impact resistance of laminate floor covering elements. The test described measures the ability of the surface layer to withstand impact from both small and large objects dropped on the floor covering. The testing is destructive by means of the impact on the surface layer from one small and one larger steel ball simulating different scenarios. The falling height of both the small and the large steel ball is used to define the ability for a laminate floor covering element to withstand impacts. Both tests are generally carried out on parts of the laminate floor panels with suitable sizes.
The precision of the large-diameter ball method is not known. When interlaboratory data become available, a precision statement will be added in subsequent revisions. The precision regarding the small diameter method is stated in Clause 8.
|
Published |
2022-08 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24336:2005 |
Laminate floor coverings — Determination of thickness swelling after partial immersion in water |
ISO 24336:2005 specifies a test method for the determination of thickness swelling of laminate floor-covering elements after partial immersion in water. The testing is destructive and is mainly intended to evaluate the behaviour of the laminate floor-covering element in contact with water. Possible pre-attached soft backing material, sub-layers or any other material integrated at the underside of the floor-covering element are not included in the test and should therefore be removed before testing.
|
Published |
2005-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24337:2006 |
Laminate floor coverings — Determination of geometrical characteristics |
ISO 24337:2006 gives test methods to determine the dimensional variance between elements of laminate floor coverings in a manufactured free-standing shape (unrestricted) in respect to thickness, length, width, squareness, straightness, width flatness, length flatness, openings between assembled elements and height differences between assembled elements.
|
Withdrawn |
2006-08 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
79.080
Semi-manufactures of timber
;
97.150
Floor coverings
|
| ISO 24337:2019 |
Laminate floor coverings — Determination of geometrical characteristics |
This document gives test methods to determine the dimensional variance between elements of laminate floor coverings in a manufactured free-standing shape (unrestricted) in respect of thickness, length, width, squareness, straightness, width flatness, length flatness, openings between assembled elements and height differences between assembled elements.
NOTE These test methods are also applicable to other mechanically assembled panels, e.g. modular multilayer floorings.
|
Published |
2019-11 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
79.080
Semi-manufactures of timber
;
97.150
Floor coverings
|
| ISO 24338:2006 |
Laminate floor coverings — Determination of abrasion resistance |
ISO 24338:2006 specifies a method for measuring abrasion of laminate floor covering elements. The test described measures the ability of the surface layer to resist abrasive wear-through. Abrasion is achieved by rotating a test specimen in contact with a pair of loaded cylindrical wheels covered with specified abrasive paper. The number of revolutions of the test specimen required to cause a defined degree of abrasion is measured.
|
Withdrawn |
2006-04 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24338:2014 |
Laminate floor coverings — Determination of abrasion resistance |
ISO 24338:2014 specifies two methods (A and B) for measuring abrasion of laminate floor covering elements. The tests described measure the ability of the surface layer to resist abrasive wear-through.
Abrasion, according to method A, is achieved by rotating a test specimen in contact with a pair of loaded cylindrical wheels covered with specified abrasive paper. The resistance to wear, according to method B, is evaluated by abrading the face of test pieces with a specified abrasive applied by means of two loaded wheels. The number of revolutions of the test specimen required to cause a defined degree of abrasion is measured by both methods.
NOTE The precision of the methods is not known. When inter-laboratory data become available, a precision statement will be added.
|
Withdrawn |
2014-12 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24338:2022 |
Laminate floor coverings — Determination of abrasion resistance |
This document specifies two methods (A and B) for measuring abrasion of laminate floor covering elements. The tests described measure the ability of the surface layer to resist abrasive wear-through.
Abrasion according to method A is achieved by rotating a test specimen in contact with a pair of loaded cylindrical wheels covered with specified abrasive paper. The resistance to wear according to method B is evaluated by abrading the face of test pieces with a specified abrasive applied by means of two loaded wheels. The number of revolutions of the test specimen required to cause a defined degree of abrasion is measured by both methods.
NOTE The precision of the methods is not known. When inter-laboratory data become available, a precision statement will be added.
|
Published |
2022-03 |
Edition : 3 |
Number of pages : 19 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24339:2006 |
Laminate and textile floor coverings — Determination of dimensional variations after exposure to humid and dry climate conditions |
ISO 24339:2006 specifies a process to determine the capability of laminate and textile floor coverings to withstand exposure to moderate humid and dry climate conditions. The subclauses pertaining to flatness, openings between elements and height differences between elements only apply to laminated floor coverings.
|
Published |
2006-05 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24340:2006 |
Resilient floor coverings — Determination of thickness of layers |
ISO 24340:2006 describes a method for determining the thickness of different layers of resilient floor coverings.
|
Published |
2006-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24341:2006 |
Resilient and textile floor coverings — Determination of length, width and straightness of sheet |
ISO 24341:2005 specifies methods for determining the length, width and straightness of resilient or textile floor coverings in sheet form.
|
Published |
2006-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24342:2006 |
Resilient floor-covering tiles — Determination of side length, edge straightness and squareness |
ISO 24342:2006 describes methods for determining side lengths, straightness of edges and squareness of resilient floor tiles.
The side lengths, straightness and squareness of resilient floor tile are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This may cause the installed tiles to line up unevenly, producing unsightly seams and corners that do not match.
|
Withdrawn |
2006-09 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24342:2007 |
Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles |
ISO 24342:2007 describes methods for determining side lengths, straightness of edges and squareness of resilient or textile floor tiles.
The side lengths, straightness and squareness of resilient or textile floor tiles are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This may cause the installed tiles to line up unevenly, producing unsightly seams and corners that do not match.
|
Withdrawn |
2007-09 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24342:2007/Amd 1:2012 |
Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles — Amendment 1 |
|
Withdrawn |
2012-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12757-1:2017 |
Ball point pens and refills — Part 1: General use |
ISO 12757-1:2017 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use.
Additional requirements for ball point pens for documentary use are given in ISO 12757‑2.
|
Published |
2017-12 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 24342:2018 |
Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles |
This document describes methods for determining side lengths, straightness of edges and squareness of resilient or textile floor tiles and planks.
The side lengths, straightness and squareness of resilient or textile floor tiles and planks are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This can cause the installed tiles/planks to line up unevenly, producing unsightly seams and corners that do not match.
|
Published |
2018-11 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
97.150
Floor coverings
|
| ISO/DIS 24342 |
Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles and planks |
adapt the test methods to planks
|
Under development |
|
Edition : 4 |
Number of pages : 12 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-1:2007 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 1: Residual indentation |
ISO 24343-1:2007 describes a method for determining the residual indentation produced in a resilient or laminate floor covering after the application and removal of a constant load.
|
Published |
2007-06 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-2:2011 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term residual indentation of resilient floor covering |
ISO 24343-2:2011 describes a method for determining the short-term indentation and residual indentation produced in a resilient floor covering after the application and removal of a constant load.
|
Withdrawn |
2011-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-2:2018 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term indentation and residual indentation of resilient floor covering |
This document describes a method for determining the short-term indentation and residual indentation produced in a resilient floor covering after the application and removal of a constant load.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-3:2011 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles |
ISO 24343-3:2011 describes a method for determining the short-term indentation resistance of resilient semi-flexible/vinyl composition tile (VCT) floor covering after the application of constant load.
|
Withdrawn |
2011-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24343-3:2018 |
Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles |
This document describes a method for determining the short-term indentation resistance of resilient semi-flexible/vinyl composition tile (VCT) floor covering after the application of constant load.
|
Published |
2018-10 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24344:2008 |
Resilient floor coverings — Determination of flexibility and deflection |
ISO 24344:2008 specifies methods for determining the flexibility and deflection of resilient floor coverings.
|
Published |
2008-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24345:2006 |
Resilient floor coverings — Determination of peel resistance |
ISO 24345:2006 describes a method for determining the resistance against separation of two layers of a resilient floor covering by peeling.
|
Published |
2006-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 24346:2006 |
Resilient floor coverings — Determination of overall thickness |
ISO 24346:2006 specifies a method for determining the overall thickness of resilient floor coverings.
|
Published |
2006-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.150
Floor coverings
|
| ISO 25620:2008 |
Laminate floor coverings — Determination of long-side friction for mechanically assembled panels |
ISO 25620:2008 specifies a method for the determination of the long-side friction of joints between laminate floor panels which are held together on the floor by mechanical locking systems.
|
Published |
2008-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.150
Floor coverings
|
| ISO 26985:2008 |
Resilient floor coverings — Identification of linoleum and determination of cement content and ash residue |
ISO 26985:2008 specifies methods for identifying linoleum and determining the cement content and ash residue of linoleum floor coverings.
|
Published |
2008-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 26986:2010 |
Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification |
ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.
|
Published |
2010-09 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.150
Floor coverings
|
| ISO 26986:2010/Amd 1:2022 |
Resilient floor coverings — Expanded (cushioned) poly(vinyl chloride) floor covering — Specification — Amendment 1 |
|
Published |
2022-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.150
Floor coverings
|
| ISO 26987:2008 |
Resilient floor coverings — Determination of staining and resistance to chemicals |
ISO 26987:2008 specifies a procedure for the determination of the reaction of resilient floor covering to chemical substances.
|
Published |
2008-08 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.150
Floor coverings
|
| ISO 12952-1:1998 |
Textiles — Burning behaviour of bedding items — Part 1: General test methods for the ignitability by a smouldering cigarette |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-1:2010 |
Textiles — Assessment of the ignitability of bedding items — Part 1: Ignition source: smouldering cigarette |
ISO 12952-1:2010 specifies test methods for assessing the ignitability of all bedding items, when subjected to a smouldering cigarette.
ISO 12952-1:2010 applies to bedding items, which can normally be placed on a mattress, for example:
mattress covers;
underlays;
incontinence sheets and pads;
sheets;
blankets;
electric blankets;
quilts (duvets) and covers;
pillows (whatever the filling) and bolsters;
pillowcases.
ISO 12952-1:2010 does not apply to mattresses, bed bases and mattress pads.
|
Published |
2010-10 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-2:1998 |
Textiles — Burning behaviour of bedding items — Part 2: Specific test methods for the ignitability by a smouldering cigarette |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-2:2010 |
Textiles — Assessment of the ignitability of bedding items — Part 2: Ignition source: match-flame equivalent |
ISO 12952-2:2010 specifies tests for assessing the ignitability of all bedding items when subjected to a match-flame equivalent.
ISO 12952-2:2010 applies to bedding items, which can normally be placed on a mattress, for example:
mattress covers;
underlays;
incontinence sheets and pads;
sheets;
blankets;
electric blankets;
quilts (duvets) and covers;
pillows (whatever the filling) and bolsters;
pillowcases.
ISO 12952-2:2010 does not apply to mattresses, bed bases and mattress pads.
|
Published |
2010-10 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-3:1998 |
Textiles — Burning behaviour of bedding items — Part 3: General test methods fot the ignitability by a small open flame |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 12952-4:1998 |
Textiles — Burning behaviour of bedding items — Part 4: Specific test methods for the ignitability by a small open flame |
|
Withdrawn |
1998-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.160
Home textiles. Linen
;
13.220.40
Ignitability and burning behaviour of materials and products
|
| ISO 3533:2021 |
Sex toys — Design and safety requirements for products in direct contact with genitalia, the anus, or both |
This document specifies safety and user information requirements relating to the materials and design for manufactured products intended for sexual use.
This document covers only manufactured products that are intended to come in direct contact with genitals and/or the anus.
This document is not primarily intended for products classified as medical devices, cosmetics or assistive products for example lubricants, massage oil.
|
Published |
2021-09 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.170
Body care equipment
|
| ISO 8627:1987 |
Dentistry — Stiffness of the tufted area of tooth-brushes |
Specification of a test method and grading scheme for the stiffness of the tufted area of conventional manual tooth-brushes, together with the relevant information concerning definitions and those concerning testing machines. The original number of classifications of five categories has been reduced to three ones, i.e. soft, medium and hard. Eight definitions of important terms are given.
|
Withdrawn |
1987-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.170
Body care equipment
|
| ISO 10873:2010 |
Dentistry — Denture adhesives |
ISO 10873:2010 classifies denture adhesives used by wearers of removable dentures; it also specifies requirements, test methods and instructions to be supplied for the use of such products.
ISO 10873:2010 is applicable to denture adhesives for use by the public and excludes the dental lining materials prescribed or applied by dental professionals.
ISO 10873:2010 does not specify qualitative or quantitative requirements for freedom from biological hazards. For assessing possible biological hazards, see ISO 7405 and ISO 10993-1.
|
Withdrawn |
2010-09 |
Edition : 1 |
Number of pages : 15 |
Technical Committee |
97.170
Body care equipment
|
| ISO 10873:2021 |
Dentistry — Denture adhesives |
This document classifies denture adhesives used by wearers of removable dentures; it also specifies requirements, test methods and instructions to be supplied for the use of such products.
This document is applicable to denture adhesives for use by the consumer and excludes the dental lining materials prescribed or applied by dental professionals.
|
Published |
2021-07 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
97.170
Body care equipment
|
| ISO 11609:1995 |
Dentistry — Toothpastes — Requirements, test methods and marking |
Gives requirements and test methods for physical and chemical properties, and for marking and/or labelling of toothpastes for daily use with a toothbrush.
|
Withdrawn |
1995-12 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.170
Body care equipment
|
| ISO 11609:2010 |
Dentistry — Dentifrices — Requirements, test methods and marking |
ISO 11609:2010 specifies requirements for the physical and chemical properties of dentifrices and provides guidelines for suitable test methods. It also specifies requirements for the marking, labelling and packaging of dentifrices.
ISO 11609:2010 applies to dentifrices, including toothpastes, destined to be used by the public on a daily basis with a toothbrush to promote oral hygiene.
|
Withdrawn |
2010-09 |
Edition : 2 |
Number of pages : 20 |
Technical Committee |
97.170
Body care equipment
|
| ISO 11609:2017 |
Dentistry — Dentifrices — Requirements, test methods and marking |
ISO 11609:2017 specifies requirements for the physical and chemical properties of dentifrices and provides guidelines for suitable test methods. It also specifies requirements for the marking, labelling and packaging of dentifrices.
ISO 11609:2017 applies to dentifrices, including toothpastes, destined to be used by the consumers on a daily basis with a toothbrush to promote oral hygiene.
Specific qualitative and quantitative requirements for freedom from biological and toxicological hazards are not included in this document. These are covered in ISO 7405[1] and ISO 10993‑1[2].
|
Published |
2017-06 |
Edition : 3 |
Number of pages : 22 |
Technical Committee |
97.170
Body care equipment
|
| ISO 16408:2004 |
Dentistry — Oral hygiene products — Oral rinses |
ISO 16408:2004 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as manufacturer's instructions for use, marking and/or labelling requirements.
ISO 16408:2004 is not applicable to other delivery systems (e.g. mouthsprays, foams, powders). It is not intended to describe regulatory aspects, e.g. methods of prescription.
ISO 16408:2004 is not applicable to oral rinses available by prescription only.
|
Withdrawn |
2004-04 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.170
Body care equipment
|
| ISO 16408:2015 |
Dentistry — Oral care products — Oral rinses |
ISO 16408:2015 specifies physical and chemical requirements and test methods for oral rinses. It also specifies the accompanying information such as the manufacturer's instructions for use, marking, and/or labelling requirements.
ISO 16408:2015 is not applicable to other delivery systems (e.g. mouthsprays, foams, powders). It is not intended to describe regulatory aspects, e.g. methods of prescription.
ISO 16408:2015 is not applicable to oral rinses available by prescription only.
|
Published |
2015-08 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.170
Body care equipment
|
| ISO 16409:2006 |
Dentistry — Oral hygiene products — Manual interdental brushes |
ISO 16409:2006 specifies requirements and test methods for performance criteria for manual interdental brushes with a round cross-section of the brush head.
It also specifies the accompanying information, such as the manufacturer's instructions for use and labelling of the packaging.
ISO 16409:2006 is not applicable to powered interdental brushes, manual toothbrushes, dental floss, tapes, and strings, nor is it applicable to interdental cleaners that do not include filaments.
|
Withdrawn |
2006-10 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.170
Body care equipment
|
| ISO 16409:2006/Amd 1:2010 |
Dentistry — Oral hygiene products — Manual interdental brushes — Amendment 1 |
|
Withdrawn |
2010-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.170
Body care equipment
|
| ISO 16409:2016 |
Dentistry — Oral care products — Manual interdental brushes |
ISO 16409:2016 specifies requirements and test methods for performance criteria for manual interdental brushes with a round cross-section of the brush head and consisting of a wired stem with inserted filaments. It also specifies the accompanying information such as manufacturer's instructions for use and labelling of the packaging.
Excluded are interdental brushes with a plastic core.
ISO 16409:2016 is not applicable to powered interdental brushes, manual toothbrushes, dental floss, tapes, and strings and to interdental cleaners that do not include filaments.
|
Published |
2016-10 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
97.170
Body care equipment
|
| ISO 17730:2014 |
Dentistry — Fluoride varnishes |
ISO 17730:2014 specifies requirements and their test methods for total digestible fluoride content in dental varnishes containing fluoride, intended for use in the oral cavity directly on the outer surfaces of teeth and fillings. It also specifies the requirements for their packaging and labelling, including the instructions for use. This International Standard covers fluoride varnishes to be applied by dental health care workers.
|
Withdrawn |
2014-11 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.170
Body care equipment
|
| ISO 17730:2020 |
Dentistry — Fluoride varnishes |
This document specifies requirements and test methods for total digestible fluoride content and a minimum soluble fluoride release potential in dental varnishes containing fluoride, intended for use in the oral cavity directly on the outer surfaces of teeth and fillings. It also specifies packaging and labelling requirements, including the instructions for use. This document covers fluoride varnishes to be applied by dental health care workers.
|
Published |
2020-09 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.170
Body care equipment
|
| ISO 19448:2018 |
Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode |
ISO 19448:2018 specifies test methods for the quantification of fluoride concentrations in dental products including dentifrices, gels, oral rinses, fluoride releasing varnishes, and other fluoride containing products. The methods are based on fluoride ion-selective electrode technology for the analysis of fluoride in aqueous samples derived from dental products.
|
Published |
2018-01 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.170
Body care equipment
|
| ISO/TS 19736:2017 |
Dentistry — Bonding test between polymer teeth and denture base materials |
ISO/TS 19736:2017 specifies a test method for bonding of polymer teeth to denture base materials.
This test method is not designed to prove the properties of polymer teeth and denture base materials.
|
Published |
2017-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.170
Body care equipment
|
| ISO 20126:2005 |
Dentistry — Manual toothbrushes — General requirements and test methods |
ISO 20126:2005 specifies requirements and test methods for the physical properties of manual toothbrushes in order to promote the safety of these products for their intended use.
Specifically excluded are manual interdental brushes and powered oral hygiene devices as these instruments are covered by separate International Standards.
|
Withdrawn |
2005-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.170
Body care equipment
|
| ISO 20126:2012 |
Dentistry — Manual toothbrushes — General requirements and test methods |
This International Standard specifies requirements and test methods for the physical properties of manual toothbrushes in order to promote the safety of these products for their intended use.
This International Standard does not apply to manual interdental brushes and powered oral hygiene devices, as these instruments are covered by separate International Standards.
|
Withdrawn |
2012-01 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.170
Body care equipment
|
| ISO 20126:2012/Amd 1:2018 |
Dentistry — Manual toothbrushes — General requirements and test methods — Amendment 1 |
|
Withdrawn |
2018-01 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
97.170
Body care equipment
|
| ISO 20126:2022 |
Dentistry — Manual toothbrushes — General requirements and test methods |
This document specifies requirements and test methods for the physical properties of manual toothbrushes in order to promote the safety of these products for their intended use.
This document does not specify any requirements and test methods for the physical properties of toothbrushes for which all the cleaning elements in the head are elastomer.
This document does not apply to manual single tuft toothbrushes, single use, interdental and powered oral hygiene devices. These types of oral hygiene products are evaluated for their safety in-use by appropriate test methods or clinical trials.
In addition, for the filaments end-rounding requirements, this document does not apply to particular filament types which are very thin (less than 0,1 mm outside diameter) or have no sharp edges (e.g. tapered, feathered, with split tips, or spherical cap) or non-synthetic filaments, where applying end-rounding process is inappropriate or impossible. These types of manual toothbrushes are evaluated for their safety in-use by appropriate test methods or clinical trials appropriately.
|
Published |
2022-03 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
97.170
Body care equipment
|
| ISO 20127:2005 |
Dentistry — Powered toothbrushes — General requirements and test methods |
ISO 20127:2005 specifies requirements and test methods for the physical properties of powered toothbrushes in order to promote the safety of these products for their intended use.
Specifically excluded are other types of powered oral hygiene devices (such as powered interdental brushes) and manual toothbrushes.
|
Withdrawn |
2005-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.170
Body care equipment
|
| ISO 14145-1:1998 |
Roller ball pens and refills — Part 1: General use |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 20127:2020 |
Dentistry — Physical properties of powered toothbrushes |
This document specifies requirements and test methods for the physical properties of powered toothbrushes in order to promote the safety of these products for their intended use.
There are different technologies of powered toothbrushes. Common features of those powered toothbrushes to which this document applies are:
— a battery;
— a motor;
— a mechanical or magnetic drive system;
— a moving brush head with tufted filaments.
Powered toothbrushes can have a moving brush head with different motions (e.g. oscillating-rotating, side-by-side), frequencies and velocities.
The requirements listed in this document apply to all types of powered toothbrushes. However, there is a possibility that some requirements are not applicable for all types, for example brush head plate retention can only be applied if the brush has a head portion that might get detached from the brush shaft.
This document is not applicable to other types of powered oral hygiene devices (such as powered interdental brushes) or manual toothbrushes.
|
Published |
2020-08 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
97.170
Body care equipment
|
| ISO 22254:2005 |
Dentistry — Manual toothbrushes — Resistance of tufted portion to deflection |
ISO 22254:2005 specifies a test method for determining the resistance of the tufted portion of manual toothbrushes to deflection. This International Standard is applicable to toothbrushes having a conventional flat trim design and may not be applicable to toothbrushes with other designs. The results obtained with this International Standard may not correspond to consumer perceptions of the stiffness of toothbrush bristles.
|
Published |
2005-08 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.170
Body care equipment
|
| ISO 28158:2010 |
Dentistry — Integrated dental floss and handles |
ISO 28158:2010 is applicable to integrated dental floss and handles for manual use. It does not include dental floss and handles which contain a continuous supply of dental floss, or dental floss and handles to which the floss is subsequently added.
ISO 28158:2010 does not specify specific qualitative and quantitative test methods for demonstrating freedom from unacceptable biological risks.
|
Withdrawn |
2010-07 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.170
Body care equipment
|
| ISO 28158:2018 |
Dentistry — Integrated dental floss and handles |
This document specifies the requirements and test methods for integrated dental floss and handles used for home care, community care, professional care of oral health or a part of dental treatment.
This document is applicable to integrated dental floss and handles for manual use. It does not include dental floss and handles which contain a continuous supply of dental floss, or handles to which the floss is subsequently added.
This document excludes specific qualitative and quantitative test methods for demonstrating freedom from unacceptable biological risks. For assessment of such biological risks, see ISO 10993-1 and ISO 7405.
|
Published |
2018-09 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
97.170
Body care equipment
|
| ISO 28399:2011 |
Dentistry — Products for external tooth bleaching |
ISO 28399:2011 specifies requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products). It also specifies requirements for their packaging, labelling and instructions for use.
The following tooth bleaching products are not covered by ISO 28399:2011:
those intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal) or using restorative approaches, such as veneers or crowns;
auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are used in conjunction with the bleaching products.
|
Withdrawn |
2011-01 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
97.170
Body care equipment
|
| ISO 28399:2020 |
Dentistry — External tooth bleaching products |
This document specifies requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and manufacturer's instructions for use.
This document is not applicable to tooth bleaching products:
— specified in ISO 11609;
— intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal) or using restorative approaches, such as veneers or crowns;
— auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are used in conjunction with the bleaching products.
This document does not specify biological safety aspects of tooth bleaching products.
NOTE Maximum concentration of a bleaching agent for professional or non-professional use is subject to each country's regulatory body.
|
Withdrawn |
2020-03 |
Edition : 2 |
Number of pages : 22 |
Technical Committee |
97.170
Body care equipment
|
| ISO 9994:2005 |
Lighters — Safety specification |
ISO 9994:2005 establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users.
The safety specification given in this International Standard applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches, nor does it apply to other flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes.
Lighters, being flame-producing devices, can, as do all flame sources, present a potential hazard to users. The safety specification given in this International Standard cannot eliminate all hazards, but is intended to reduce potential hazards to users.
|
Withdrawn |
2005-09 |
Edition : 4 |
Number of pages : 26 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 28399:2021 |
Dentistry — External tooth bleaching products |
This document specifies the requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and manufacturer's instructions for use.
This document is not applicable to tooth bleaching products:
— specified in ISO 11609;
— intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal) or using restorative approaches, such as veneers or crowns;
— auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are used in conjunction with the bleaching products.
This document does not specify biological safety aspects of tooth bleaching products.
NOTE Maximum concentration of a bleaching agent for professional or non-professional use is subject to each country's regulatory body.
|
Published |
2021-03 |
Edition : 3 |
Number of pages : 22 |
Technical Committee |
97.170
Body care equipment
|
| ISO 28888:2013 |
Dentistry — Screening method for erosion potential of oral rinses on dental hard tissues |
ISO 28888:2013 specifies a screening method for the erosion potential of non-fluoridated oral rinses on dental hard tissues. The results of the screening method are intended for use in enamel and/or dentine erosion models.
|
Published |
2013-10 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.170
Body care equipment
|
| ISO 9177-1:1989 |
Mechanical pencils — Part 1: Classification, dimensions, performance requirements and testing |
|
Withdrawn |
1989-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-1:2011 |
Mechanical pencils — Part 1: Classification, dimensions, performance requirements and testing |
|
Withdrawn |
2011-11 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-1:2016 |
Mechanical pencils for technical drawings — Part 1: Classification, dimensions, performance requirements and testing |
ISO 9177-1:2016 specifies classification, dimensions, performance requirements and testing for hand-held mechanical pencils used for technical drawings.
|
Published |
2016-10 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-2:1989 |
Mechanical pencils — Part 2: Black leads — Classification and dimensions |
Two types are available, black leads in which the binding agent is an organic polymer (designated by the letter "P"), and black leads in which the binding agent is clay (designated by the letter "C"). Classification is made according to the degree of hardness. Part 1 deals with the classification, dimensions, performance requirements and testing.
|
Withdrawn |
1989-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-2:2022 |
Mechanical pencils for technical drawings — Part 2: Black leads — Classification and dimensions |
This document specifies a classification and dimensions for black leads used for mechanical pencils for technical drawings.
Two types of black leads are available:
— polymer leads (designated by the letter “P”);
— ceramic leads (designated by the letter “C”).
|
Published |
2022-06 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-3:1994 |
Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads |
Specifies bending strengths and a test method for black leads of HB hardness degree used for mechanical pencils for technical drawings.
|
Withdrawn |
1994-07 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9177-3:2022 |
Mechanical pencils for technical drawings — Part 3: Black leads — Bending strengths of HB leads |
This document specifies bending strengths and a test method for black leads of HB hardness degree used for mechanical pencils for technical drawings.
|
Published |
2022-01 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 9994:1995 |
Lighters — Safety specification |
Establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters.
|
Withdrawn |
1995-12 |
Edition : 2 |
Number of pages : 14 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 9994:2002 |
Lighters — Safety specification |
|
Withdrawn |
2002-03 |
Edition : 3 |
Number of pages : 23 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 9994:2018 |
Lighters — Safety specifications |
This document specifies requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users.
This document applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters.
It does not apply to matches and flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes.
|
Published |
2018-12 |
Edition : 5 |
Number of pages : 27 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 11540:1993 |
Caps for writing and marking instruments intended for use by children up to 14 years of age — Safety requirements |
Specifies safety requirements for cap size, ventilated caps (vent area, air flow) and marking. Annex A describes the test for air flow. Caps which do not comply should have the instrument or its packaging labelled with a warning as to the dangers of asphyxiation from pen caps.
|
Withdrawn |
1993-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO 11540:2014 |
Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation |
ISO 11540:2014 specifies requirements to reduce the risk of asphyxiation from caps for writing and marking instruments. It relates to such instruments which in normal or foreseeable circumstances are likely to be used by children up to the age of 14 years.
ISO 11540:2014 is not applicable to the following: writing and marking instruments which are designed or only intended for use by adults (e.g. jewellery pens, expensive fountain pens, professional technical pens); transit caps for refills.
|
Withdrawn |
2014-03 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO 11540:2021 |
Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation |
This document specifies requirements to reduce the risk of asphyxiation from caps for writing and marking instruments. It relates to such instruments which in normal or foreseeable circumstances are likely to be used by children up to the age of 14 years.
This document is not applicable to the following:
— writing and marking instruments which are designed or only intended for use by adults, e.g. jewellery pens, expensive fountain pens, professional technical pens;
— transit caps for refills.
|
Published |
2021-08 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
97.190
Equipment for children
|
| ISO 12756:1998 |
Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary |
|
Withdrawn |
1998-04 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.040.01
Generalities. Terminology. Standardization. Documentation (Vocabularies)
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
01.100.40
Drawing equipment
|
| ISO 12756:1998/Amd 1:2011 |
Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary — Amendment 1: Viscosity of the writing fluid |
|
Withdrawn |
2011-02 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.040.01
Generalities. Terminology. Standardization. Documentation (Vocabularies)
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
01.100.40
Drawing equipment
|
| ISO 12756:2016 |
Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary |
ISO 12756:2016 defines terms related to ball point pens and roller ball pens.
|
Published |
2016-11 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.040.01
Generalities. Terminology. Standardization. Documentation (Vocabularies)
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
;
01.100.40
Drawing equipment
|
| ISO 12757-1:1998 |
Ball point pens and refills — Part 1: General use |
|
Withdrawn |
1998-05 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 12757-1:2016 |
Ball point pens and refills — Part 1: General use |
ISO 12757-1:2016 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use.
Additional requirements for ball point pens for documentary use are given in ISO 12757‑2.
|
Withdrawn |
2016-11 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 14145-1:1998/Amd 1:2011 |
Roller ball pens and refills — Part 1: General use — Amendment 1: Ball diameter for tip classification |
|
Withdrawn |
2011-03 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 14145-1:2016 |
Roller ball pens and refills — Part 1: General use |
ISO 14145-1:2016 establishes minimum quality requirements for roller ball pens (refillable and non-refillable) and refills for general use.
Additional requirements for roller ball pens for documentary use are given in ISO 14145‑2.
|
Withdrawn |
2016-10 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 14145-1:2017 |
Roller ball pens and refills — Part 1: General use |
|
Published |
2017-12 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 20318-1:2019 |
Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 1: Mechanical pencils |
This document specifies classification, dimensions, quality and test methods for hand-held mechanical pencilss which hold and feed out a lead, and are used for general writing. It is also applicable to multi-function pens equipped with a mechanical pencil unit. However, those pencils attached to machinery instruments such as a plotter are excluded.
|
Published |
2019-02 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 20318-2:2019 |
Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 2: Black leads |
This document specifies classification, dimensions, quality and test methods for black leads used for mechanical pencils for general writing, as specified in ISO 20318-1.
|
Published |
2019-03 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
;
01.100.40
Drawing equipment
|
| ISO 22702:2003 |
Utility lighters — General consumer-safety requirements |
ISO 22702:2003 gives a consumer-safety specification covering all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods or gas matches), and similar devices. Matches are specifically excluded from the safety specification; flame-producing products intended for igniting cigars, pipes and cigarettes are also specifically excluded from the safety specification.
|
Withdrawn |
2003-11 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 22702:2003/Amd 1:2008 |
Utility lighters — General consumer-safety requirements — Amendment 1: Clarification of requirements and addition of safety symbols |
|
Withdrawn |
2008-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 22702:2018 |
Utility lighters — Safety specifications |
This document specifies requirements for utility lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users.
This document applies to all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods or gas matches), and similar devices.
It does not apply to matches and flame-producing products intended for igniting cigars, pipes and cigarettes.
|
Published |
2018-12 |
Edition : 2 |
Number of pages : 24 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 27668-1:2009 |
Gel ink ball pens and refills — Part 1: General use |
ISO 27668-1:2009 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use.
Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.
|
Withdrawn |
2009-02 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 27668-1:2016 |
Gel ink ball pens and refills — Part 1: General use |
ISO 27668-1:2016 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use.
Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.
|
Withdrawn |
2016-10 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 27668-1:2017 |
Gel ink ball pens and refills — Part 1: General use |
ISO 27668-1:2017 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use.
Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.
|
Published |
2017-11 |
Edition : 3 |
Number of pages : 11 |
Technical Committee |
97.180
Miscellaneous domestic and commercial equipment
|
| ISO 4211-3:2013 |
Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat |
ISO 4211-3:2013 specifies a method for the assessment of the resistance to dry heat of all rigid furniture surfaces regardless of materials.
It does not apply to leather and textile surfaces.
|
Published |
2013-05 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
97.140
Furniture
|
| ISO/IEC Guide 50:1987 |
Child safety and standards — General guidelines |
This Guide establishes basic safety principles for technical bodies preparing national and international standards for products which are intended specifically for use by children; these principles should also apply to products with which children are likely to come into contact. The following aspects are considered: ergonomic considerations, toxicity, flammability and thermal injuries, ingestion and inhalation of foreign bodies, mechanical hazards and construction features, electrical safety, radiation, marking and labelling, packaging, marketing. Annex A includes a list of possible preventive measures for specific types of product-related accidents.
|
Withdrawn |
1987-04 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.120
Standardization. General rules
;
97.190
Equipment for children
|
| ISO/IEC Guide 50:2002 |
Safety aspects — Guidelines for child safety |
This Guide provides a framework for addressing potential sources of unintentional physical harm (hazards) to children from products, processes or services that they use or with which they may come into contact, even if they are not specifically intended for children. The framework aims at minimizing risk of injury to children.
It is primarily intended for those involved in the preparation and revision of standards. However, it has important information that can be useful to, amongst others, designers, architects, manufacturers, service providers, communicators and policy makers.
For children with special needs, additional requirements may be appropriate. This Guide does not claim to address those additional requirements in full. ISO/IEC Guide 71 addresses the neds of persons with disabilities.
A product may include goods, structures, buildings, installations or a combination of these.
No specific guidance is given in this Guide for the prevention or reduction of psychological or moral harm or of intentional injuries.
|
Withdrawn |
2002-05 |
Edition : 2 |
Number of pages : 29 |
Technical Committee |
01.120
Standardization. General rules
;
97.190
Equipment for children
|
| ISO/IEC Guide 50:2014 |
Safety aspects — Guidelines for child safety in standards and other specifications |
ISO/IEC Guide 50:2014 provides guidance to experts who develop and revise standards, specifications and similar publications. It aims to address potential sources of bodily harm to children from products that they use, or with which they are likely to come into contact, even if not specifically intended for children.
ISO/IEC Guide 50:2014 does not provide guidance on the prevention of intentional harm (e.g. child abuse) or non-physical forms of harm, such as psychological harm (e.g. intimidation).
ISO/IEC Guide 50:2014 does not address the economic consequences of the above.
|
Published |
2014-12 |
Edition : 3 |
Number of pages : 36 |
Technical Committee |
01.120
Standardization. General rules
;
97.190
Equipment for children
|
| ISO 7175-2:1988 |
Furniture — Children's cots — Safety requirements and testing — Part 2: Test methods |
|
Withdrawn |
1988-07 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
97.140
Furniture
;
97.190
Equipment for children
|