| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 4817:1984 |
Household sewing machines — Determination of directional stability (drift) |
The directional stability (drift) is caused by irregularities of the feed mechanism as an individual machine funktion, without using a sewing thread. The method is applicable to motor-operated household sewing machines, but it may also be possible to apply it to hand- or treadle-operated machines. Includes additionally to definitions, principle, preparation of the sewing machine, prodcedure, expression of results and test report an annex which specifies material and apparatus.
|
Withdrawn |
1984-11 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.080
Sewing machines and other equipment for the clothing industry
|
| ISO 4818:1984 |
Household sewing machines — Determination of creep of one ply of material over another |
The method is applicable to motor-operated household sewing machines, but it may also be possible to apply it to hand- or treadle-operated machines. Includes additionally to definition, principle, preparation of the sewing machine, procedure, expression of results and test report an annex which specifies material and apparatus.
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.080
Sewing machines and other equipment for the clothing industry
|
| ISO 4819:1983 |
Household sewing machines — Determination of reproducibility of stitch length setting |
The method determines the stitch length at constant setting of the stitch length setting control after various adjustments and is applicable to motor-operated household sewing machines, but it may also be possible to apply it to hand- or treadle- operated machines. Includes additionally to principle, preparation of the sewing machine, procedure, expression of results and test report an annex which specifies material and apparatus.
|
Withdrawn |
1983-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
61.080
Sewing machines and other equipment for the clothing industry
|
| ISO 7114:1990 |
Household sewing machines — Numerical classification |
Establishes a numerical classification of sewing machines. Gives the classification criteria the characteristics of which are tabulated in tables 1 to 7 respectively.
|
Withdrawn |
1990-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
61.080
Sewing machines and other equipment for the clothing industry
|
| ISO 8239:1987 |
Sewing machines needles — Fitting dimensions — Tolerances and combinations |
ISO 8239 specifies the fitting dimensions of needles and needle holders. It defines general terms for sewing machine needles and specifies the tolerances for their fit in the needle holder. In addition to the rangers of dimensions for the nominal shank diameter and the length from butt to eye, ISO 8239 also indicates the preferred combinations of these two dimensions. In order to ensure the interchangeability and to reduce the variety of needles these should serve as a guide when designing new sewing machines and/or sewing machine needles.
|
Published |
1987-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.080
Sewing machines and other equipment for the clothing industry
|
| ISO 10821:2005 |
Industrial sewing machines — Safety requirements for sewing machines, units and systems |
ISO 10821:2005 identifies hazards and specifies safety requirements applicable to sewing machines, sewing units and sewing systems designed for professional (industrial, commercial or laboratory) use in industries including the clothing and footwear, leather goods, shirts and blousery, hosiery and knitwear, lingerie, glove, upholstery and packaging industries, and in shoe repair. The use of such machines in other industries could give rise to hazards not considered. It is not applicable to shoe bottom stitching machines, large shuttle embroidery machines in accordance with ISO 11111 or household sewing machines in accordance with IEC 60335-2-28.
|
Published |
2005-07 |
Edition : 1 |
Number of pages : 76 |
Technical Committee |
61.080
Sewing machines and other equipment for the clothing industry
|
| ISO 10821:2005/Amd 1:2009 |
Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1 |
|
Published |
2009-03 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
61.080
Sewing machines and other equipment for the clothing industry
|
| ISO 105-C12:2004 |
Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering |
ISO 105-C12:2004 specifies methods for determining the resistance of the colour of textiles of all kinds exposed to all forms of industrial laundering procedures.
|
Published |
2004-11 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
97.060
Laundry appliances
;
59.080.01
Textiles in general
|
| ISO 105-C12:2004/Cor 1:2007 |
Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering — Technical Corrigendum 1 |
|
Withdrawn |
2007-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
97.060
Laundry appliances
;
59.080.01
Textiles in general
|
| ISO 6804:1982 |
Rubber hose and hose assemblies — Washing-machines and dishwashers — Specification |
|
Withdrawn |
1982-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.060
Laundry appliances
;
83.140.40
Hoses
;
97.040.40
Dishwashers
|
| ISO 6804:1991 |
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
Specifies requirements for two types of hoses. Type 1: for unheated water supply only. Type 2: for heated water supply (max. 90°C). This second edition cancels and replaces the first edition (1982).
|
Withdrawn |
1991-07 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
97.060
Laundry appliances
;
83.140.40
Hoses
;
97.040.40
Dishwashers
|
| ISO 6804:2009 |
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
ISO 6804:2009 specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar).
It is applicable to the following types of hose:
Type 1: rubber hoses for unheated water supply (maximum temperature 70 °C).
Type 2: rubber hoses for heated water supply (maximum temperature 90 °C).
Type 3: plastics hoses for unheated water supply (maximum temperature 60 °C).
|
Withdrawn |
2009-09 |
Edition : 3 |
Number of pages : 13 |
Technical Committee |
97.060
Laundry appliances
;
83.140.40
Hoses
;
97.040.40
Dishwashers
|
| ISO 6804:2016 |
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
ISO 6804:2016 specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar).
It is applicable to the following types of hose:
- type 1: rubber hoses for unheated water supply (maximum temperature 70 °C);
- type 2: rubber hoses for heated water supply (maximum temperature 90 °C);
- type 3: plastics hoses for unheated water supply (maximum temperature 60 °C).
There may be national requirements for hose fittings and hoses conveying drinking water which must be complied with.
|
Published |
2016-11 |
Edition : 4 |
Number of pages : 13 |
Technical Committee |
97.060
Laundry appliances
;
83.140.40
Hoses
;
97.040.40
Dishwashers
|
| ISO/PRF 6804 |
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
ISO 6804:2016 specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar).
It is applicable to the following types of hose:
- type 1: rubber hoses for unheated water supply (maximum temperature 70 °C);
- type 2: rubber hoses for heated water supply (maximum temperature 90 °C);
- type 3: plastics hoses for unheated water supply (maximum temperature 60 °C).
There may be national requirements for hose fittings and hoses conveying drinking water which must be complied with.
|
Under development |
2023-05 |
Edition : 5 |
Number of pages : 13 |
Technical Committee |
97.060
Laundry appliances
;
83.140.40
Hoses
;
97.040.40
Dishwashers
|
| ISO 7772-1:1998 |
Assessment of industrial laundry machinery by its effect on textiles — Part 1: Washing machines |
|
Withdrawn |
1998-06 |
Edition : 1 |
Number of pages : 33 |
Technical Committee |
97.060
Laundry appliances
;
59.080.01
Textiles in general
|
| ISO 7772-2:1996 |
Assessment of industrial laundry machinery by its effect on textiles — Part 2: Extracting machines |
Describes methods for the assessment of extracting machines in which water is removed mechanically from textiles in their wet state after washing.
|
Withdrawn |
1996-09 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
97.060
Laundry appliances
;
59.080.01
Textiles in general
|
| ISO 7772-3:1996 |
Assessment of industrial laundry machinery by its effect on textiles — Part 3: Flatwork-ironing machines |
Describes methods for the assessment of flatwork-ironing machines that are used in the laundering field. Applies to ironing machines heated by steam, thermal fluid, gas or electrical power.
|
Withdrawn |
1996-09 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.060
Laundry appliances
;
59.080.01
Textiles in general
|
| ISO 7772-4:1996 |
Assessment of industrial laundry machinery by its effect on textiles — Part 4: Batch-drying tumblers |
Describes methods for the assessment of industrial drying tumbler machines in which the damp washing is loosened and partially or completely dried under the action of heated air and mechanical energy.
|
Withdrawn |
1996-09 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.060
Laundry appliances
;
59.080.01
Textiles in general
|
| ISO 8229:1991 |
Operations and baths relating to dry-cleaning machines — Vocabulary |
Specifies 22 terms and definitions in English and French. Some may be used with different meanings in other fields. Contains the alphabetical indexes in English and French.
|
Published |
1991-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.060
Laundry appliances
;
01.040.97
Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
|
| ISO 8230-1:2008 |
Safety requirements for dry-cleaning machines — Part 1: Common safety requirements |
ISO 8230-1:2008 specifies common safety requirements for dry-cleaning machines. It is applicable to dry-cleaning machines of all sizes intended for industrial and commercial use for the cleaning of articles made of textile, leather, furs and skins, using exclusively either perchloroethylene or combustible solvent as the cleaning medium.
It is not applicable to: machines placed at the disposal of the general public (self-service); barrier machines; transfer machines; ironing presses (see ISO 10472-1 and ISO 10472-6); ancillary equipment, e.g. room ventilation equipment, waste recuperation systems of the still, external water cooling systems or external systems for solvent recovery from the still sludge.
ISO 8230-1:2008 deals with all significant hazards arising from the use of the dry‑cleaning machine, where “use of the dry‑cleaning machine” comprises both intended use and foreseeable abnormal situations and includes commissioning, use and maintenance. It defines the common safety requirements for dry‑cleaning machines and is intended to be used in conjunction with ISO 8230‑2 and ISO 8230‑3, as relevant. Specific requirements in ISO 8230‑2 and ISO 8230‑3 take precedence over the respective requirements of ISO 8230-1.
ISO 8230-1:2008 does not deal with hazards caused by processing items that can create an explosive atmosphere (e.g. printers' wipers containing a low-flash solvent), nor with machines processing loads that can contain “foreign solvents”, which could lead to a change in a property (characteristic) of the cleaning solvent, e.g. cause foaming or make it carcinogenic.
|
Published |
2008-10 |
Edition : 1 |
Number of pages : 31 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 4251-1:1984 |
Tyres and rims (existing series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions |
|
Withdrawn |
1984-12 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 8230-2:2008 |
Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene |
ISO 8230-2:2008 specifies safety requirements for dry-cleaning machines that exclusively use perchloroethylene (or “perc”) as their cleaning medium. It is applicable to such dry-cleaning machines, within the scope of ISO 8230-1, when they are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer.
ISO 8230-2:2008, in conjunction with ISO 8230-1, deals with all significant hazards, significant hazardous situations and significant hazardous events that have been identified as being significant to the types of machines covered by ISO 8230-2:2008 and which require specific action by the designer or manufacturer to eliminate or reduce the risk.
It deals with the following significant hazards specific to the use of perc, which can lead to the inhalation of unhealthy vapours, to perc contact with the skin (including of the feet) or eyes of the machine operator and those of other personnel and members of the public, as well as to water and ground contamination: perc emission to the workroom, seepage into the ground and sewer during operation and maintenance of the water separator; perc emission resulting from operation, cleaning and maintenance of the distilling installation.
|
Published |
2008-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 8230-3:2008 |
Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents |
ISO 8230-3:2008 specifies safety requirements for dry-cleaning machines that use a combustible solvent (CS) as their cleaning medium.
It is applicable to such dry-cleaning machines, within the scope of ISO 8230-1, when they are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer.
ISO 8230-3:2008, in conjunction with ISO 8230-1, deals with all significant hazards, significant hazardous situations and significant hazardous events that have been identified as being significant to the types of machines covered by this part of ISO 8230 and which require specific action by the designer or manufacturer to eliminate or reduce the risk.
It deals with the following significant hazards specific to the use of CS: hazards related to the entire dry-cleaning machine (electrical hazards, explosion hazards); hazards relating to the machine and tumblers (combustible solvent emission, explosion hazards during the cleaning phase, explosion hazards during the drying phase); hazards relating to the distilling equipment (combustible solvent emission, explosion hazards).
|
Published |
2008-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 8230:1997 |
Safety requirements for dry-cleaning machines using perchloroethylene |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 8232:1988 |
Closed-circuit dry-cleaning machines — Defining and checking of machine characteristics |
Provides suitable methods of checking the solvent consumption, the efficiency of solvent recovery during drying, and the solvent concentrations in the atmosphere surrounding the cited machines. Safety requirements concerning the industrial use of these machines are not included.
|
Published |
1988-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 9398-1:1993 |
Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 1: Flatwork ironing machines |
Defines the characteristics and gives the usual test methods for these characteristics with regard to the capacity, the power and water consumptions, and the hourly productivity. Does not cover safety requirements. Is used for reference in the drafting of purchasing orders for flatwork ironing machines.
|
Withdrawn |
1993-02 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 9398-1:2003 |
Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 1: Flatwork ironing machines |
ISO 9398-1:2002 defines the characteristics of flatwork ironing machines and gives the usual test methods for determining these characteristics with regard to machine capacity, power consumption and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for flatwork ironing machines having a contact surface area greater than 0,25 m2. It does not cover safety requirements (see ISO 10472-5).
|
Published |
2003-01 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 9398-2:1993 |
Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 2: Batch drying tumblers |
Defines the characteristics and gives the usual test methods for these characteristics with regard to the capacity, the power and water consumptions, and the hourly productivity. Does not cover safety requirements. Is used for reference in the drafting of purchasing orders for batch drying tumblers whose nominal capacity is at least 7 kg.
|
Withdrawn |
1993-02 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 9398-2:2003 |
Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 2: Batch drying tumblers |
ISO 9398-2:2002 defines the characteristics of batch drying tumblers and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for batch drying tumblers whose net usable cage volume is greater than 160 dm3 (litres). It does not cover safety requirements (see ISO 10472-4).
|
Published |
2003-01 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 9398-3:2003 |
Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 3: Washing tunnels |
ISO 9398-3:2002 defines the characteristics of washing tunnels and gives the usual test methods for determining machine power consumption and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for washing tunnels. It does not cover safety requirements (see ISO 10472-3).
|
Published |
2003-01 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 9398-4:1993 |
Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 4: Washer-extractors |
Defines the characteristics and gives the usual test methods for these characteristics with regard to the capacity, the power and water consumptions, and the hourly productivity. Does not cover safety requirements. Is used for reference in the drafting of purchasing orders for washer-extractors whose nominal capacity is at least 7 kg.
|
Withdrawn |
1993-02 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 9398-4:2003 |
Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 4: Washer-extractors |
ISO 9398-4:2002 defines the characteristics of washer-extractors and gives the usual test methods for these characteristics with regard to machine capacity, power and water consumption, and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for washer-extractors whose net usable cage volume is greater than 60 dm (litres). It does not cover safety requirements (see ISO 10472-2).
|
Published |
2003-01 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 10472-1:1997 |
Safety requirements for industrial laundry machinery — Part 1: Common requirements |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 10472-2:1997 |
Safety requirements for industrial laundry machinery — Part 2: Washing machines and washer-extractors |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 10472-3:1997 |
Safety requirements for industrial laundry machinery — Part 3: Washing tunnel lines including component machines |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 10472-4:1997 |
Safety requirements for industrial laundry machinery — Part 4: Air dryers |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 10472-5:1997 |
Safety requirements for industrial laundry machinery — Part 5: Flatwork ironers, feeders and folders |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 10472-6:1997 |
Safety requirements for industrial laundry machinery — Part 6: Ironing and fusing presses |
|
Published |
1997-12 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
97.060
Laundry appliances
|
| ISO/IEC TR 18781:2015 |
Identification cards — Laundry testing of ID Cards |
ISO/IEC TR 18781:2015 gives guidance on the principles and methods of testing ID cards to simulate accidental exposure to conditions encountered during the washing and drying of clothing. The physical properties of a card may degrade after exposure and the test methods described may be useful for comparing different card materials or types.
Although there are many variations in the design and operation of washing machines, the operation of washing, rinsing, and water removal is common to all types of machine. For simplicity, one washing and drying cycle is specified, which is thought to be typical, according to industry sources. Additional wash cycles and/or different temperature conditions can be used for comparative purposes if desired.
|
Published |
2015-10 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
97.060
Laundry appliances
|
| ISO 8965:1987 |
Logging industry — Technology — Terms and definitions |
Relates to production operations. The standard is a trilingual edition and includes an alphabetical index in English, French and Russian.
|
Withdrawn |
1987-11 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
79.020
Wood technology processes
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 8965:2013 |
Logging industry — Technology — Terms and definitions |
ISO 8365:2013 defines terms relating to technological operations in the logging industry.
|
Withdrawn |
2013-10 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
79.020
Wood technology processes
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 4251-1:1988 |
Tyres and rims (existing series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions |
|
Withdrawn |
1988-03 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 8965:2022 |
Logging industry — Technology — Vocabulary |
This document defines terms relating to technological operations in the logging industry.
NOTE See ISO 6814 for terms and definitions related to mobile and self-propelled machinery used in forestry.
|
Published |
2022-07 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
79.020
Wood technology processes
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 8966:1987 |
Logging industry — Products — Terms and definitions |
Covers products used in various fields, e.g. logs for the pulp and paper industry, board production and chemical processing as well as fuel-woods. Is a trilingual edition and includes an alphabetical index in English, French, and Russian.
|
Withdrawn |
1987-10 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
79.020
Wood technology processes
;
01.040.79
Wood technology (Vocabularies)
|
| ISO 38200:2018 |
Chain of custody of wood and wood-based products |
This document specifies requirements for a chain of custody (CoC) of wood and wood-based products, cork and lignified materials other than wood, such as bamboo, and their products.
NOTE The term "material" will henceforth be used throughout this document to denote "raw materials and products from wood, cork and lignified materials other than wood, such as bamboo", as defined in 3.8.
This document is applicable to material that originates from different categories of input material and can be derived from mechanical, chemical, biological and/or thermal processing or a combination thereof.
A chain of custody relies on a control system to track and handle material throughout the entire supply chain or parts of the supply chain, including transportation, receipt, production, sale, resale and output declaration. This document is intended to enable tracking of material from different categories of source to finished products.
Furthermore, this document also specifies minimum requirements for input material.
This document is not applicable to forest management.
|
Published |
2018-10 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
79.020
Wood technology processes
|
| ISO 2332:1983 |
Agricultural tractors and machinery — Connections — Clearance zone for the three-point linkage of implements |
|
Withdrawn |
1983-12 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
65.060
Agricultural machines, implements and equipment
|
| ISO 4251-3:1985 |
Tyres and rims (existing series) for agricultural tractors and machines — Part 3: Rims |
|
Withdrawn |
1985-02 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
65.060
Agricultural machines, implements and equipment
|
| ISO 5353:1978 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point |
|
Withdrawn |
1978-03 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
53.100
Earth-moving machinery
;
65.060
Agricultural machines, implements and equipment
|
| ISO 5353:1978/Amd 1:1981 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point — Amendment 1 |
|
Withdrawn |
1981-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
;
65.060
Agricultural machines, implements and equipment
|
| ISO 5353:1978/Amd 2:1984 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point — Amendment 2 |
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
53.100
Earth-moving machinery
;
65.060
Agricultural machines, implements and equipment
|
| ISO 5673:1980 |
Agricultural tractors — Power take-off drive shafts for machines and implements |
|
Withdrawn |
1980-11 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
65.060
Agricultural machines, implements and equipment
|
| ISO 5674:1982 |
Tractors and machinery for agriculture and forestry — Guards for power take-off drive shafts — Test methods |
|
Withdrawn |
1982-07 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
65.060
Agricultural machines, implements and equipment
|
| ISO 4250-1:1988 |
Narrow and wide base off-road tyres and rims — Part 1: Tyre designation and dimensions |
|
Withdrawn |
1988-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4250-1:1988/Amd 1:1990 |
Narrow and wide base off-road tyres and rims — Part 1: Tyre designation and dimensions — Amendment 1 |
|
Withdrawn |
1990-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4250-2:1991 |
Narrow and wide base off-road tyres and rims — Part 2: Loads and inflation pressures |
|
Withdrawn |
1991-03 |
Edition : 2 |
Number of pages : 10 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-1:1992 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions |
|
Withdrawn |
1992-10 |
Edition : 4 |
Number of pages : 9 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-1:1998 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours |
|
Withdrawn |
1998-09 |
Edition : 5 |
Number of pages : 12 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-1:2005 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours |
ISO 4251-1:2005 establishes the designation in use and the dimensions of the ply rating marked series of tyres for agricultural tractors and machines.
Tyre load ratings, rim dimensions, and tyre classification and nomenclature are given in ISO 4251-2, ISO 4251-3 and ISO 4251-4 respectively.
|
Withdrawn |
2005-09 |
Edition : 6 |
Number of pages : 19 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-1:2005/Amd 1:2012 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours — Amendment 1 |
|
Withdrawn |
2012-01 |
Edition : 6 |
Number of pages : 8 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-1:2017 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours |
ISO 4251-1:2017 establishes the designation in use and the dimensions of the ply rating marked series of tyres for agricultural tractors and machines.
Tyre load ratings are given in ISO 4251‑2.
|
Withdrawn |
2017-04 |
Edition : 7 |
Number of pages : 21 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-1:2019 |
Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines — Part 1: Tyre designation and dimensions, and approved rim contours |
This document establishes the designation in use and the dimensions of code designated tyres in diagonal construction (ply rating marked series) for agricultural tractors, trailers and machines.
Tyre load ratings are given in ISO 4251‑2.
NOTE Code designated diagonal tyres (ply rating marked series) for construction applications (industrial tractors), identified by the classification code R-4, as specified in ISO 18805, or by suffix "IND" are covered by ISO 13442.
Code designated tyres in radial construction for drive wheels of agricultural tractors are covered by ISO 8664.
Code designated diagonal tyres (ply rating marked series) for forestry machines, identified by the classification code LS, as specified in ISO 18805, are covered by ISO 18807.
|
Published |
2019-07 |
Edition : 8 |
Number of pages : 22 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:1980/Add 1:1981 |
Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings — Addendum 1 |
|
Withdrawn |
1981-11 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:1980/Add 2:1982 |
Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings — Addendum 2 |
|
Withdrawn |
1982-02 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:1984 |
Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings |
|
Withdrawn |
1984-12 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:1987 |
Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings |
|
Withdrawn |
1987-11 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:1992 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings |
|
Withdrawn |
1992-10 |
Edition : 4 |
Number of pages : 11 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:1998 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings |
|
Withdrawn |
1998-12 |
Edition : 5 |
Number of pages : 11 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:2005 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings |
ISO 4251-2:2005 specifies load ratings for the ply rating marked series of tyres for agricultural tractors and machines.
Tyre designation and dimensions, and approved rim contours, rim dimensions, and tyre classification and nomenclature are given in ISO 4251-1, ISO 4251-3 and ISO 4251-4 respectively.
|
Withdrawn |
2005-09 |
Edition : 6 |
Number of pages : 19 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:2005/Amd 1:2011 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings — Amendment 1 |
|
Withdrawn |
2011-12 |
Edition : 6 |
Number of pages : 3 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:2017 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings |
ISO 4251-2:2017 establishes the load ratings of the ply rating marked series of tyres for agricultural tractors and machines.
Tyre designation and dimensions, and approved rim contours are given in ISO 4251‑1.
|
Withdrawn |
2017-04 |
Edition : 7 |
Number of pages : 17 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-2:2019 |
Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines — Part 2: Tyre load ratings |
This document establishes the load ratings of the diagonal code designated (ply rating marked series) tyres for agricultural tractors, trailers and machines.
Tyre designation and dimensions, and approved rim contours are given in ISO 4251‑1.
NOTE Code designated diagonal tyres (ply rating marked series) for construction applications (industrial tractors), identified by the classification code R-4, as specified in ISO 18805, or by suffix "IND" are part of ISO 13442.
Code designated diagonal tyres (ply rating marked series) for forestry machines, identified by the classification code LS, as specified in ISO 18805, are covered by ISO 18807.
|
Published |
2019-07 |
Edition : 8 |
Number of pages : 25 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-3:2006 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 3: Rims |
ISO 4251-3:2006 specifies rim dimensions for the ply rating marked series of tyres for agricultural tractors and machines.
|
Withdrawn |
2006-08 |
Edition : 4 |
Number of pages : 18 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-4:1980 |
Tyres and rims (Existing series) for agricultural tractors and machines — Part 4: Tyres classification and nomenclature |
|
Withdrawn |
1980-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-4:1992 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 4: Tyre classification and nomenclature |
Tabulates the classification codes R (R-1 to R-4), F (F-1 to F-3), I (I-1 to I-6), G (G-1 to G-3) and LS (LS-2 and LS-3).
|
Withdrawn |
1992-03 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-4:2010 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 4: Tyre classification and nomenclature |
ISO 4251‑4:2010 specifies the classification codes and nomenclature of the ply rating marked series of tyres for agricultural tractors and machines.
|
Withdrawn |
2010-03 |
Edition : 3 |
Number of pages : 3 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-5:1988 |
Tyres and rims (existing series) for agricultural tractors and machines — Part 5: Log skidder tyres |
|
Withdrawn |
1988-05 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-5:1992 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 5: Logging and forestry service tyres |
Describes the designation, dimensions, load ratings and rim coordination for tyres of diagonal construction. Gives terms and definitions.
|
Withdrawn |
1992-03 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 4251-5:1992/Amd 1:1998 |
Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 5: Logging and forestry service tyres — Amendment 1 |
|
Withdrawn |
1998-09 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO/DIS 5383 |
Agricultural tyres for lawn and garden tractors — 3-part code designated tyres |
|
Deleted |
|
Edition : 1 |
Number of pages : 15 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-1:1988 |
Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions |
|
Withdrawn |
1988-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-1:1992 |
Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions and marking |
|
Withdrawn |
1992-05 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7409:2018 |
Fertilizers — Marking — Presentation and declarations |
ISO 7409:2018 specifies the procedure for marking containers or labels for fertilizers.
ISO 7409:2018 is applicable to all fertilizers in containers or bulk.
|
Published |
2018-03 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
65.080
Fertilizers
|
| ISO 7867-1:1996 |
Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions, marking and tyre/rim coordination |
Establishes the size designation, the dimensional calculation and the markings of the metric series of tyres for use on agricultural tractors and machines. Replaces the second edition.
|
Withdrawn |
1996-04 |
Edition : 3 |
Number of pages : 10 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-1:2005 |
Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination |
ISO 7867-1:2005 establishes the size designation, the dimensional calculation and the markings of the metric series of tyres primarily intended for use on agricultural tractors and machines. Tyre and rim coordination is also given.
ISO 7867-1:2005 applies to bias-belted, diagonal and radial tyres mounted an 5° tapered rims, as specified in ISO 4251-3. Only established rim diameters and widths within the ranges in Tables 1 and 2 are recommended.
ISO 7867-1:2005 also applies to different concepts and types of tyres and rims; in this case, however, appropriate rim/section ratios K1 and coefficients K2, a and b will be established and added.
Dimensions of existing rims are specified in ISO 4251-3.
|
Withdrawn |
2005-06 |
Edition : 4 |
Number of pages : 18 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-1:2018 |
Metric series for agricultural, forestry machines and construction tyres — Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination |
This document establishes the tyre size designation, the dimensional calculation formulae, the markings and the tyre and rim coordination for the metric series of tyres primarily intended for use on agricultural and forestry tractors, machines, equipment and trailers and for construction machines.
It applies to diagonal, bias-belted and radial tyres mounted on 5° and 15° tapered rims.
NOTE Code designated series of:
— diagonal (ply rating marked) tyres for agricultural tractors and machines are specified in ISO 4251-1 and ISO 4251-2;
— radial (service description marked) tyres for agricultural tractor-drive-wheel tyres are specified in ISO 8664;
— tyres for logging and forestry machines are specified in ISO 18807[1];
— tyres for construction/industrial tractors are specified in ISO 13442.
[1] Under preparation. Stage at the moment of publication ISO/DIS 18807:2018.
|
Published |
2018-10 |
Edition : 5 |
Number of pages : 34 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-2:1996 |
Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings |
Establishes the service description and the tyre load ratings in basic and special applications for the metric series of tyres for agricultural tractors and machines.
|
Withdrawn |
1996-04 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-2:1996/Cor 1:1996 |
Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings — Technical Corrigendum 1 |
Contains additions for table 2, corrects table A.4 and replaces the existing table A.5.
|
Withdrawn |
1996-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-2:2005 |
Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings |
ISO 7867-2:2005 establishes the service description, the tyre load ratings in basic and special applications, and reference inflation pressure increments for the metric series of tyres primarily intended for agricultural tractors and machines.
It applies to bias-belted, diagonal and radial tyres mounted on 5° tapered rims, as specified in ISO 4251-3. It also applies to different concepts and types of tyres and rims; in these cases, however, appropriate load/speed curves and reference inflation pressure increments will be established and added.
Basic tyre load-carrying capacities for ranges of existing tyres are also given.
|
Withdrawn |
2005-06 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-2:2005/Amd 1:2010 |
Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings — Amendment 1: . |
|
Withdrawn |
2010-05 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 7867-2:2018 |
Metric series for agricultural, forestry machines and construction tyres — Part 2: Load ratings for agricultural tyres |
This document establishes the service description, the tyre load ratings for basic and special applications and reference inflation pressure for the metric series of tyres primarily intended for agricultural tractors, machines, equipment and their trailers.
It applies to diagonal, bias belted and radial tyres mounted on 5° and 15° tapered rims.
NOTE The service description, the tyre load ratings for basic and special applications and reference inflation pressure for the metric series of:
— tyres for logging and forestry machines are specified in ISO 18807;
— tyres for construction/industrial tractors are specified in ISO 13442.
|
Published |
2018-09 |
Edition : 3 |
Number of pages : 25 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 8664:1992 |
Agricultural tractor drive-wheel tyres — Service description (load index — speed symbol) marked tyres |
Specifies the marking, dimensions, load ratings and reference speeds for existing series of tyres. Applies to tyres of radial construction in the speed categories 30 km/h and 40 km/h.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 8664:2005 |
Tyres for agricultural tractors and machines — Code-designated and service-description marked radial drive-wheel tyres |
ISO 8664:2005 specifies the marking, dimensions, load ratings and reference speeds for existing series of agricultural tractor drive-wheel tyres with service description (load index and speed symbol).
It applies to tyres of radial construction in the speed categories 30 km/h (speed symbol A6), 40 km/h (speed symbol A8), and 50 km/h (speed symbol B)
|
Withdrawn |
2005-06 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 8664:2005/Amd 1:2010 |
Tyres for agricultural tractors and machines — Code-designated and service-description marked radial drive-wheel tyres — Amendment 1 |
|
Withdrawn |
2010-05 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 8664:2018 |
Tyres for agricultural tractors and machines — Code-designated and service-description marked radial drive-wheel tyres |
This document specifies the marking, dimensions, load ratings and reference speeds for code-designated agricultural tractor drive-wheel tyres with service description (load index and speed symbol).
It applies to tyres of radial construction in the speed categories 40 km/h (speed symbol A8), and 50 km/h (speed symbol B).
NOTE Code designated series of:
— diagonal (ply rating marked) tyres for agricultural tractors and machines are specified in ISO 4251‑1 and ISO 4251‑2;
— tyres for logging and forestry machines are specified in ISO 18807[1];
— tyres for construction/industrial tractors are specified in ISO 13442.
[1] To be published.
|
Published |
2018-07 |
Edition : 3 |
Number of pages : 14 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 11795:1997 |
Agricultural tractor drive wheel tyres — Method of measuring tyre rolling circumference |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 11795:1997/Amd 1:2010 |
Agricultural tractor drive wheel tyres — Method of measuring tyre rolling circumference — Amendment 1 |
|
Withdrawn |
2010-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 11795:2018 |
Agricultural tractor drive wheel tyres — Explanation of rolling circumference index (RCI) and speed radius index (SRI) and method of measuring tyre rolling circumference |
This document specifies the method for measuring rolling circumference for new tyres, under loaded conditions, made for use on agricultural tractors and machines, and applies to agricultural tractor drive wheel tyres in diagonal and radial construction. It also includes an explanation of the rolling circumference index (RCI) and speed radius index (SRI).
|
Published |
2018-06 |
Edition : 2 |
Number of pages : 5 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 11795:2018/Amd 1:2022 |
Agricultural tractor drive wheel tyres — Explanation of rolling circumference index (RCI) and speed radius index (SRI) and method of measuring tyre rolling circumference — Amendment 1 |
|
Published |
2022-01 |
Edition : 2 |
Number of pages : 2 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 18804:2017 |
Rims for agricultural, forestry and construction machines |
ISO 18804 specifies rim dimensions for rims for agricultural, forestry, and construction machines.
All dimensions in ISO 18804 are given in millimetres and are applicable to the side of rim which is in contact with the tyre during the mounting and in service.
NOTE Terms used are in accordance with ISO 3911.
|
Withdrawn |
2017-10 |
Edition : 1 |
Number of pages : 28 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|
| ISO 18804:2021 |
Rims for agricultural, forestry and construction machines |
This document specifies rim dimensions for rims for agricultural, forestry, and construction machines.
|
Published |
2021-08 |
Edition : 2 |
Number of pages : 26 |
Technical Committee |
83.160.30
Tyres for agricultural machinery
|