ESG-database.dk - Version 0.0.9

This page provides an overview of all ISO standards referenced on the ISO homepage, per 02/04-2023.

ISO standards


Name Description Abstract Status Publication date Edition Number of pages Technical committee ICS
ISO 18805:2017 Tyre classification — Agricultural, forestry and construction machines ISO 18805:2017 specifies the classification codes for agricultural and forestry tractors and machines.  Published 2017-09 Edition : 1 Number of pages : 2 Technical Committee 83.160.30 Tyres for agricultural machinery
ISO 18807:2019 Tyres and rims for logging and forestry service This document sets out the marking, the tyre size designation, the dimensions, the load ratings and the rim coordination for logging and forestry service tyres in diagonal and radial construction. Rim dimensions are given in ISO 18804.  Published 2019-08 Edition : 1 Number of pages : 19 Technical Committee 83.160.30 Tyres for agricultural machinery
ISO 3944:1980 Fertilizers — Determination of bulk density (loose)  Withdrawn 1980-11 Edition : 2 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 7410:1983 Fertilizers and soil conditioners — Final samples — Practical arrangements Describes appropriate containers, the sealing of the containers, and the labelling, disposal and storage of the samples.  Published 1983-04 Edition : 1 Number of pages : 1 Technical Committee 65.080 Fertilizers
ISO 3944:1992 Fertilizers — Determination of bulk density (loose) The method is applicable to solid, but not powder fertilizers, dry only. It is not suitable for fertilizers which contain a large proportion of particles exceeding 5 mm in diameter. Its principle is pouring the fertilizer from a specified funnel into a specified measuring cylinder of known volume and weighing the contents of the cylinder. If the fertilizer has absorbed moisture during transport or storage, it is necessary to dry it in an environmental chamber.  Published 1992-07 Edition : 3 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 3963:1977 Fertilizers — Sampling from a conveyor by stopping the belt The method should be used only where other methods, such as automatic sampling of scoop sampling from a free fall, are impossible, or as a reference method.It consists in inserting of two parallel boards or metal sheets vertically down into and at right angles to the streams of the material and to the axis of the stopped belt, and removing of the material between the boards or sheets.  Published 1977-07 Edition : 1 Number of pages : 2 Technical Committee 65.080 Fertilizers
ISO 4176:1981 Fertilizers — Determination of nitrate nitrogen content — Nitron gravimetric method The method is suitable as a reference method and is applicable to all fertilizers. It consists in precipitating of nitrate ions in acid solution as a complex with nitron reagent, filtrating of the precipitate, drying and weighing.  Withdrawn 1981-04 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 5306:1983 Fertilizers — Presentation of sampling reports A report should be made for each sample taken. If the sample is divided into a number of equivalent portions, a copy of the report should accompany each portion. An example of a typical report is given in an annex.  Published 1983-12 Edition : 1 Number of pages : 8 Technical Committee 65.080 Fertilizers
ISO/TR 5307:1991 Solid fertilizers — Derivation of a sampling plan for the evaluation of a large delivery Gives the mathematical derivation of the sampling plan specified in ISO 8634. The tables of values in the annexes A and B are for information only.  Published 1991-12 Edition : 1 Number of pages : 25 Technical Committee 65.080 Fertilizers
ISO 5308:1992 Solid fertilizers — Method of checking the performance of mechanical devices for sampling of product moving in bulk  Withdrawn 1992-11 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 5310:1986 Fertilizers — Determination of potassium content — Titrimetric method The method consists in precipitating of potassium ions by an excess of sodium tetraphenylborate (NaTPB) in a weakly alkaline medium, filtrating and determing of the unused NaTPB by back titration with cetyltrimethylammoniumbromide solution. The test solution shall be prepared as specified in ISO 5317 or ISO 7407.  Withdrawn 1986-12 Edition : 1 Number of pages : 4 Technical Committee 65.080 Fertilizers
ISO 5311:1983 Fertilizers — Determination of bulk density (tapped)  Withdrawn 1983-02 Edition : 2 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 5311:1992 Fertilizers — Determination of bulk density (tapped) Specifies two methods for dry fertilizers only: the machine-tapping method and the hand-tapping method. Its principle is pouring the fertilizer from a specified funnel into a specified measuring cylinder of known volume, tapping the cylinder by means of a tapping machine or the walls of the cylinder by hand, and weighing the contents of the cylinder. If the fertilizer has absorbed moisture during transport or storage, it is necessary to dry it in an environmental chamber.  Published 1992-07 Edition : 3 Number of pages : 4 Technical Committee 65.080 Fertilizers
ISO 5313:1986 High nitrogen content, straight ammonium nitrate fertilizers — Determination or oil retention The result of the method is a measure for the porosity of the material. The method is applicable to substances which do not contain materials soluble in gas oil and which are prilled or granular. It consists in total immersing of a test portion in gas oil for a specified period, followed by the draining away and the removal of surplus gas oil under specified conditions, and measuring of the increase in mass of the test portion.  Published 1986-05 Edition : 1 Number of pages : 2 Technical Committee 65.080 Fertilizers
ISO 5314:1981 Fertilizers — Determination of ammoniacal nitrogen content — Titrimetric method after distillation The method consists in distilling of the ammonia from an alkaline solution, absorbing in an excess of standard volumetric sulphuric acid solution and back-titrating with standard volumetric sodium hydroxide solution. It is applicable only in the absence of urea or its derivatives, of cyanamide and of organic nitrogenous compounds.  Published 1981-05 Edition : 1 Number of pages : 4 Technical Committee 65.080 Fertilizers
ISO 7497:1984 Fertilizers — Extraction of phosphates soluble in mineral acids Specifies two equivalent methodes. They consist in dissolving the wanted substance in a mixture of hydrochloric and nitric acids or in a mixture of sulfuric and nitric acids.  Published 1984-10 Edition : 1 Number of pages : 2 Technical Committee 65.080 Fertilizers
ISO 5315:1984 Fertilizers — Determination of total nitrogen content — Titrimetric method after distillation The method consists in reducing of nitrate to ammonia by chromium powder in acid medium, converting of organic and urea nitrogen into ammonium sulfate by digestion with concentrated sulfuric acid in the presence of a catalyst, distilling of the ammonia from an alkaline solution and absorbing in an excess of standard volumetric sodium hydroxide solution. The method is not recommended for materials containing more than 7 % of organic matter.  Published 1984-05 Edition : 1 Number of pages : 5 Technical Committee 65.080 Fertilizers
ISO 5316:1977 Fertilizers — Extraction of water-soluble phosphates The method consists in dissolving in water of the phosphorus(V) oxide in a test portion by shaking, using a rotary shaker under specified conditions.  Withdrawn 1977-08 Edition : 1 Number of pages : 1 Technical Committee 65.080 Fertilizers
ISO 5317:1983 Fertilizers — Determination of water-soluble potassium content — Preparation of the test solution Specifies the reference method. It consists in boiling of a test portion with water.  Published 1983-05 Edition : 1 Number of pages : 1 Technical Committee 65.080 Fertilizers
ISO 5318:1983 Fertilizers — Determination of potassium content — Potassium tetraphenylborate gravimetric method (Reference method) The method consists in preparing of a test solution as specified in ISO 5317, precipitating of potassium ions by sodium tetraphenylborate in a weakly alkaline medium in the presence of disodium ethylenediaminetetraacetate dihydrate (EDTA, disodium salt) and formaldehyde, followed by filtrating of the precipitate, drying and weighing.  Withdrawn 1983-12 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 6181:2023 Fertilizers and soil conditioners — Liquid methylene-urea slow release fertilizers — General requirements This document specifies general requirements, analytical methods, sampling and preparation of test sample, marking and labelling, packaging, transport and storage for liquid methylene-urea slow release fertilizers. This document applies to pure liquid slow release fertilizers, i.e. methylene urea (MU). This document does not apply to mixtures of nitrogenous fertilizers containing liquid slow release fertilizers.  Published 2023-03 Edition : 1 Number of pages : 5 Technical Committee 65.080 Fertilizers
ISO 6598:1985 Fertilizers — Determination of phosphorus content — Quinoline phosphomolybdate gravimetric method The method consists in precipitating, after hydrolysis if necessary, of orthophosphate ions in the form of quinoline phosphomolybdate, in an acid medium and in the presence of acetone, at approximately 75 °C, followed by filtrating, washing drying and weighing of the precipitate obtained.  Published 1985-09 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO/FDIS 6650 Fertilizers, Soil conditioners and Beneficial Substances — Simultaneous Determination of N-buthylthiophosphorus Triamide (NBPT) and Dicyandiamide (DCD) by High-performance Liquid Chromatography (HPLC)  Under development Edition : 1 Technical Committee 65.080 Fertilizers
ISO/CD 6674 Fertilizers, soil conditioners and beneficial substances — Microbiology- Detection of Staphylococcus aureus coagulase-positive  Under development Edition : 1 Technical Committee 65.080 Fertilizers ; 07.100.99 Other standards related to microbiology
ISO/CD 6675 Fertilizers, soil conditioners and beneficial substances — Microbiology — Detection of Escherichia coli  Under development Edition : 1 Technical Committee 65.080 Fertilizers ; 07.100.99 Other standards related to microbiology
ISO 7407:1983 Fertilizers — Determination of acid-soluble potassium content — Preparation of the test solution Specifies the reference method. It consists in boiling of a test portion with dilute hydrochloric acid solution.  Published 1983-05 Edition : 1 Number of pages : 1 Technical Committee 65.080 Fertilizers
ISO 7408:1983 Fertilizers — Determination of ammoniacal nitrogen content in the presence of other substances which release ammonia when treated with sodium hydroxide — Titrimetric method The method consists in entraining, by means of a strong current of air, of the ammonia from a moderately alkaline test mixture at ambient temperature into standard volumetric sulfuric acid solution, and back-titrating of the excess sulfuric acid solution with standard volumetric sodium hydroxide solution.  Published 1983-12 Edition : 1 Number of pages : 5 Technical Committee 65.080 Fertilizers
ISO 7409:1984 Fertilizers — Marking — Presentation and declarations The standard includes the establishment of the label size, the position of the declarations and the size of the characters. These details will vary according to whether the container holds more than 25 kg, or from 5 to 25 kg, or less than 5 kg.  Withdrawn 1984-03 Edition : 1 Number of pages : 2 Technical Committee 65.080 Fertilizers
ISO/TR 7553:1987 Fertilizers — Sampling — Minimum mass of increment to be taken to be representative of the total sampling unit The report specifies the extent of mass reduction beyond which the error in the representativity can no longer be ignored.  Published 1987-07 Edition : 1 Number of pages : 7 Technical Committee 65.080 Fertilizers
ISO 7742:1988 Solid fertilizers — Reduction of samples The method consists in passaging of the material through a rotating sample divider and collecting of the fractions, followed by rejection or recombination of some of the fractions. By choosing suitable equipment it is applicable to any mass above a minimum defined by size and number of particles.  Published 1988-07 Edition : 1 Number of pages : 6 Technical Committee 65.080 Fertilizers
ISO 7837:1983 Fertilizers — Determination of bulk density (loose) of fine-grained fertilizers  Withdrawn 1983-11 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 7837:1992 Fertilizers — Determination of bulk density (loose) of fine-grained fertilizers The method is applicable to fertilizers, dry only, which contain a large proportion of particles of diameters less than 0,5 mm. Its principle is pouring the fertilizer from a specified filling device into a specified measuring cylinder of known volume and weighing the contents of the cylinder. If the fertilizer has absorbed moisture during transport or storage, it is necessary to dry it in an environmental chamber.  Published 1992-07 Edition : 2 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 7851:1983 Fertilizers and soil conditioners — Classification Establishes a classification system. It includes an explanation of the meaning of each heading and clearly assigns each material to an appropriate group.  Withdrawn 1983-10 Edition : 1 Number of pages : 8 Technical Committee 65.080 Fertilizers
ISO 7851:2022 Fertilizers, soil conditioners and beneficial substances — Classification This document establishes a system of classification for fertilizers, soil conditioners and beneficial substances. The system of classification is in accordance with: —    the nutrient contents of the fertilizer; —    the effect of the fertilizer; —    the type of product; and —    the acidity and alkalinity of the product as a supplement. It is applicable to fertilizers, soil conditioners and beneficial substances. The classification scheme for fertilizers, soil conditioners and beneficial substances (in accordance with nutrient contents) is shown in Annex A.  Published 2022-04 Edition : 2 Number of pages : 11 Technical Committee 65.080 Fertilizers
ISO 8157:1984 Fertilizers and soil conditioners — Vocabulary Defines terms most frequently used. They are grouped under the following headings: 1. General terms 2. Terms relating to products 3. Terms relating to physical properties 4. Terms relating to physico-chemical properties. Attention is drawn to ISO 7851, Fertilizers and soil conditioners - Classification.  Withdrawn 1984-12 Edition : 1 Number of pages : 16 Technical Committee 65.080 Fertilizers ; 01.040.65 Agriculture (Vocabularies)
ISO 8157:2015 Fertilizers and soil conditioners — Vocabulary ISO 8157:2015 defines terms relating to fertilizers and soil conditioners.  Withdrawn 2015-07 Edition : 2 Number of pages : 20 Technical Committee 65.080 Fertilizers ; 01.040.65 Agriculture (Vocabularies)
ISO 8157:2022 Fertilizers, soil conditioners and beneficial substances — Vocabulary This document defines terms relating to fertilizers, soil improvers, growing media, inhibitors and plant bio-stimulants.  Published 2022-09 Edition : 3 Number of pages : 25 Technical Committee 65.080 Fertilizers ; 01.040.65 Agriculture (Vocabularies)
ISO 8189:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying under reduced pressure  Withdrawn 1992-10 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 8190:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying at (105 plus or minus 2) degrees C  Withdrawn 1992-10 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 8358:1991 Solid fertilizers — Preparation of samples for chemical and physical analysis Applies to all solid fertilizers. Specifies methods for the preparation of test samples and test portions from laboratory samples. Figure 1 shows a schematic diagram of the sampling process.  Published 1991-05 Edition : 1 Number of pages : 4 Technical Committee 65.080 Fertilizers
ISO 8397:1986 Solid fertilizers and soil conditioners — Test sieving  Withdrawn 1986-11 Edition : 1 Technical Committee 65.080 Fertilizers
ISO 8397:1988 Solid fertilizers and soil conditioners — Test sieving Specifies a method for the determination of a particle size distribution, consisting in mechanical dry sieving of a sample with one or more test sieves.The second edition cancels and replaces the first edition (1986), clause 10 of which has been amended.  Published 1988-02 Edition : 2 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 8398:1989 Solid fertilizers — Measurement of static angle of repose The method is suitable for free flowing materials for measuring angles greater than 20 , but not for those which contain a large proportion of particles exceeding 5 mm in diameter.It consists in measuring of the height and diameter of the base of the cone, obtained by allowing a sample to fall through a fixed distance from a defined funnel onto a horizontal baseplate.  Published 1989-07 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 8603:1993 Solid fertilizers — Determination of urea nitrogen content — Gravimetric method using xanthydrol The principle of the method specified is precipitation of the urea with xanthydrol in acetic acid solution, filtration of the dixanthylurea precipitate, drying, and weighing. This method is not applicable to fertilizers containing cyanamide or the condensation products of urea and aldehydes.  Withdrawn 1993-01 Edition : 1 Number of pages : 4 Technical Committee 65.080 Fertilizers
ISO 8633:1992 Solid fertilizers — Simple sampling method for small lots  Published 1992-12 Edition : 1 Number of pages : 4 Technical Committee 65.080 Fertilizers
ISO 8634:1991 Solid fertilizers — Sampling plan for the evaluation of a large delivery Specifies a method for sampling a delivery of more than 250 t of fertilizer and, after analysis of the sample(s), presents rules for assessing the quality. Annex A forms an integral part of this standard. Annex B is for information only.  Published 1991-06 Edition : 1 Number of pages : 10 Technical Committee 65.080 Fertilizers
ISO 10084:1992 Solid fertilizers — Determination of mineral-acid-soluble sulfate content — Gravimetric method  Published 1992-12 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 10248:1996 Fluid fertilizers — De-aeration of suspension samples by film disentrainment Describes a procedure for the de-aeration of suspension samples for physical testing. It is not suitable if the sample contains more than a trace of free ammonia, or if the sample is too viscous.  Published 1996-12 Edition : 1 Number of pages : 1 Technical Committee 65.080 Fertilizers
ISO 10249:1996 Fluid fertilizers — Preliminary visual examination and preparation of samples for physical testing Specifies a procedure for preliminary examination of a single sample as received and a procedure for preparing a test sample by blending and reduction of a series of samples representative of a consignment of fluid fertilizer.  Published 1996-12 Edition : 1 Number of pages : 5 Technical Committee 65.080 Fertilizers
ISO 14820-1:2016 Fertilizers and liming materials — Sampling and sample preparation — Part 1: Sampling ISO 14820-1:2016 specifies sampling plans and methods of representative sampling of fertilizers and liming materials to obtain samples for physical and chemical analysis, from packages and containers up to and including 1 000 kg, from fluid products and from fertilizers in bulk provided the product is in motion. It is applicable to the sampling of lots of fertilizer or liming material supplied or ready for supply to third parties, as such, or in smaller lots, each of which would be subject to local, national or regional legislation. Where legislation so requires, samples are taken in accordance with this part of ISO 14820. NOTE The term "fertilizer" is used throughout the body of this document and is taken to include liming materials unless otherwise indicated. This part of ISO 14820 does not cover complete, statistical sampling plans.  Published 2016-05 Edition : 1 Number of pages : 47 Technical Committee 65.080 Fertilizers
ISO 14820-2:2016 Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation ISO 14820-2:2016 specifies methods for the reduction and preparation of samples of fertilizers and liming materials and sets out the requirements for sample preparation reports. It also specifies methods for the preparation of test samples and test portions from laboratory samples of fertilizer for subsequent chemical or physical analysis. It does not cover the preparation of samples for certain physical tests which require test portions of more than 2 kg. It is applicable to all fertilizers. NOTE The term "fertilizer" is used throughout the body of this part of ISO 14820 and is taken to include liming materials unless otherwise indicated.  Published 2016-05 Edition : 1 Number of pages : 7 Technical Committee 65.080 Fertilizers
ISO 18643:2016 Fertilizers and soil conditioners — Determination of biuret content of urea-based fertilizers — HPLC method ISO 18643:2016 specifies the test procedure for determination of the biuret content in liquid and solid urea-based fertilizers based on the HPLC method.  Published 2016-04 Edition : 1 Number of pages : 12 Technical Committee 65.080 Fertilizers
ISO 14820-3:2020 Fertilizers and liming materials — Sampling and sample preparation — Part 3: Sampling of static heaps This document is applicable to the sampling of mineral fertilizers and liming materials supplied or ready for supply to third parties, as a lot or in smaller lots, where such supply or readiness for supply is subject to legal requirements. This document specifies plans and methods of sampling of a lot of solid fertilizer or liming material, if sampling in motion is not possible, to obtain samples from bulk static heaps in order to ascertain compliance with legal requirements, in particular in relation to the accuracy of compulsory or permitted statutory declarations. The methods specified in this document are not applicable to obtain samples for physical size analysis or for chemical analysis which may be altered by particle granulometric segregation. This document is applicable to single nutrient fertilizers, to uniform complex fertilizers and to milled or granulated fertilizers and liming materials. The methods described in this document are not suitable for sampling other types of fertilizer, for example blended fertilizers. NOTE The term 'fertilizer' is used throughout the body of this document and includes liming materials unless otherwise indicated.  Published 2020-11 Edition : 1 Number of pages : 11 Technical Committee 65.080 Fertilizers
ISO 15604:2016 Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen ISO 15604:2016 specifies a method for the determination of any one form of nitrogen in the presence of any other form. The method is applicable to any fertilizer provided for in the Regulation (EC) No 2003/2003, Annex I[2] containing nitrogen in various forms.  Published 2016-05 Edition : 1 Number of pages : 19 Technical Committee 65.080 Fertilizers
ISO 15958:2019 Fertilizers — Extraction of water soluble phosphorus This document specifies a method for the extraction of water soluble phosphorus. The method is applicable to all fertilizers, including compound fertilizers, where water soluble phosphorus is to be determined.  Published 2019-10 Edition : 1 Number of pages : 3 Technical Committee 65.080 Fertilizers
ISO 15959:2016 Fertilizers — Determination of extracted phosphorus ISO 15959:2016 specifies a method for the determination of phosphorus in fertilizer extracts. The method is applicable to all extracts of fertilizers for the determination of the different forms of phosphorus as phosphorus soluble in mineral acids, water soluble phosphorus, phosphorus soluble in solutions of ammonium citrate, phosphorus soluble in 2 % citric acid and phosphorus soluble in 2 % formic acid.  Published 2016-07 Edition : 1 Number of pages : 9 Technical Committee 65.080 Fertilizers
ISO 17318:2015 Fertilizers and soil conditioners — Determination of arsenic, cadmium, chromium, lead and mercury contents ISO 17318:2015 specifies the test methods for determination of metals soluble in nitric acid: arsenic, cadmium, chromium, lead, and mercury contents in fertilizers. ISO 17318:2015 is applicable to the analysis of arsenic, cadmium, chromium, lead, and mercury contents in fertilizers. Special attention should be given when analysing some micro-nutrients fertilizers.  Published 2015-06 Edition : 1 Number of pages : 30 Technical Committee 65.080 Fertilizers
ISO 17319:2015 Fertilizers and soil conditioners — Determination of water-soluble potassium content — Potassium tetraphenylborate gravimetric method ISO 17319:2015 specifies a gravimetric method for the determination of the water-soluble potassium content of test solutions of fertilizers. It is suitable for use in arbitration and for reference purposes. ISO 17319:2015 is applicable to those fertilizers containing more than 1,0 % K2O or equivalent amount of K content.  Published 2015-05 Edition : 1 Number of pages : 19 Technical Committee 65.080 Fertilizers
ISO 17322:2015 Fertilizers and soil conditioners — Analytical methods for Sulfur Coated Urea (SCU) ISO 17322:2015 specifies analytical methods for the determination of mass fraction of total nitrogen, one-day dissolution rate (1DDR), seven-day dissolution rate (7DDR), mass fraction of sulfur, mass fraction of biuret, mass fraction of water (H2O), and particle size of SCU. These methods are applicable to SCU.  Published 2015-06 Edition : 1 Number of pages : 48 Technical Committee 65.080 Fertilizers
ISO 17323:2015 Fertilizers and soil conditioners — Sulfur Coated Urea (SCU) — General requirements ISO 17323:2015 specifies general requirements, sampling and preparation of test sample, marking and labelling, packaging, transport, and storage for SCU.  Published 2015-06 Edition : 1 Number of pages : 6 Technical Committee 65.080 Fertilizers
ISO 18642:2016 Fertilizer and soil conditioners — Fertilizer grade urea — General requirements ISO 18642:2016 specifies the general requirements regarding testing methods, sampling and preparation of test sample, marking and labelling, package, transport, and storage of fertilizer grade urea. It is applicable to urea in solid form, e.g. granular, prilled, or pastilled, which is made by the reaction of ammonia with carbon dioxide. Urea can be classified by its intended use, industrial and/or agricultural. It is mainly used as fertilizer in the field of agriculture. It is only applicable to fertilizer grade urea in the field of agriculture.  Published 2016-07 Edition : 1 Number of pages : 5 Technical Committee 65.080 Fertilizers
ISO 5986:1983 Animal feeding stuffs — Determination of diethyl ether extract  Withdrawn 1983-08 Edition : 1 Number of pages : 3 Technical Committee 65.120 Animal feeding stuffs
ISO 18644:2016 Fertilizers and soil conditioners — Controlled-release fertilizer — General requirements ISO 18644:2016 specifies the requirements for testing methods, sampling and preparation of test sample, marking and labelling, as well as package, transport, and storage of controlled-release fertilizer. ISO 18644:2016 is applicable to controlled-release products having one or more primary fertilizer nutrient (nitrogen and/or phosphorous and/or potassium) in a controlled-release form. They can be made by bulk blending (BB) fertilizers or by special processes.  Published 2016-04 Edition : 1 Number of pages : 6 Technical Committee 65.080 Fertilizers
ISO 18645:2016 Fertilizers and soil conditioners — Water soluble fertilizer — General requirements ISO 18645:2016 specifies the requirements for testing methods, sampling and preparation of test sample, marking and labelling, as well as package, transport, and storage of water soluble fertilizers. ISO 18645:2016 is applicable to water soluble fertilizers which are completely soluble in water and are suitable for fertigation and sprinkling irrigation, as well as for foliar application (foliar feeding).  Published 2016-03 Edition : 1 Number of pages : 8 Technical Committee 65.080 Fertilizers
ISO 19670:2017 Fertilizers and soil conditioners — Solid urea aldehyde slow release fertilizer — General requirements ISO 19670:2017 specifies general requirements, analytical methods, sampling and preparation of test sample, marking and labelling, packaging, transport and storage for solid urea aldehyde slow release fertilizer. ISO 19670:2017 applies to pure solid urea aldehyde slow release fertilizer, i.e. urea formaldehyde (UF), methylene urea (MU), crotonylidene diurea (CDU), isobutylidene diurea (IBDU). This document does not apply to mixtures of nitrogenous fertilizers containing solid urea aldehyde slow release fertilizer.  Published 2017-03 Edition : 1 Number of pages : 8 Technical Committee 65.080 Fertilizers
ISO 19746:2017 Determination of urea content in urea-based fertilizers by high performance liquid chromatography (HPLC) ISO 19746:2017 specifies the test procedure for determining the urea content in urea-based fertilizers, including urea, urea aldehydes [methylene urea fertilizers, isobutylene diurea (IBDU), crotonylidene diurea (CDU)], urea triazone fertilizers, urea ammonium nitrate (UAN), sulfur- and polymer-coated urea (SCU and PCU), as well as compound fertilizers containing urea. The method is based on High Performance Liquid Chromatography (HPLC). The proposed method is an extension of the AOAC Official Method 2003.14 which was collaboratively studied for the "Determination of Urea in Water-Soluble Urea-Formaldehyde Fertilizer Products and in Aqueous Urea Solutions" in 2003. The method was published in the Journal of AOAC in 2004[4] and was granted the First Action in 2003 and the Final Action in 2008. This method also applies to the determination of biuret content in urea containing fertilizer with the results published in the J. AOAC in 2014[5]. This method was adopted by the International Organization for Standardization (ISO) as a Committee Draft (ISO/CD 18643) in 2014, and after review and the Ring Test Analyses[6].  Published 2017-02 Edition : 1 Number of pages : 8 Technical Committee 65.080 Fertilizers
ISO 19747:2020 Fertilizers and soil conditioners — Determination of monosilicic acid concentrations in nonliquid fertilizer materials This document establishes a method for the determination of monosilicic acid concentrations in nonliquid fertilizer materials. Monosilicic acid is reported as silicon (Si). This extraction method is applicable to the detection of monosilicic acid in nonliquid fertilizer products, blended products, and beneficial substances at silicon (Si) concentrations of 2 to 84 g/kg, with a limit of detection (LOD) of 0,6 g/kg Si, and a limit of quantification (LOQ) of 2 g/kg correlating well with plant uptake. This method is not applicable to liquid silicon fertilizer sources due to an expected low bias of Si recovery and low correlation with plant uptake.  Published 2020-10 Edition : 1 Number of pages : 10 Technical Committee 65.080 Fertilizers
ISO 19822:2018 Fertilizers and soil conditioners — Determination of humic and hydrophobic fulvic acids concentrations in fertilizer materials This document specifies the procedure for the analysis of humic acids and hydrophobic fulvic acids which is applicable to dry and liquid materials used as ingredients in commercial fertilizers, soil amendments, and geological deposits.  Published 2018-08 Edition : 1 Number of pages : 16 Technical Committee 65.080 Fertilizers
ISO 20620:2021 Fertilizers and soil conditioners — Determination of total nitrogen by combustion This document specifies a method for the determination of total nitrogen content in all nitrogen containing fertilizers by combustion method. NOTE 1   The presence of non-nutritive sources of nitrogen (e.g. chelating agents) causes positive bias to samples being analysed for nutritive nitrogen content. The non-nutritive nitrogen content is subtracted from the total nitrogen value to determine the nutritive nitrogen content. NOTE 2   Common internationally traded fertilizers were evaluated for total nitrogen by combustion analysis in the ring-study in this document. While the fertilizers analysed in this international ring study were mineral fertilizers, previous studies have shown that total nitrogen by combustion is suitable for use with many non-mineral, nitrogen-containing fertilizers.  Published 2021-09 Edition : 1 Number of pages : 5 Technical Committee 65.080 Fertilizers
ISO 20702:2017 Fertilizers and soil conditioners — Determination of microamounts of inorganic anions in fertilizers by ion chromatography ISO 20702:2017 specifies the ion chromatography method for the determination of microamounts of water soluble inorganic anions, such as fluoride (F−), chloride (Cl−), bromide (Br−), iodide (I−), nitrite (NO2−) and thiocyanate (SCN−), in fertilizers.  Published 2017-12 Edition : 1 Number of pages : 50 Technical Committee 65.080 Fertilizers
ISO/TS 20917 Fertilizers, soil conditioners and beneficial substances — Determination of ammonium citrate, disodium-EDTA soluble phosphorus and potassium by ICP-OES in inorganic fertilizers  Under development Edition : 1 Technical Committee 65.080 Fertilizers
ISO 20977:2018 Liming materials — Determination of size distribution by dry and wet sieving This document specifies two methods for the determination of the particle size distribution of liming materials. Method A (the dry sieving method) is applicable to all liming materials except wet and paste-like products. Method A is not applicable if blinding, caking, electrostatic charges or agglomeration occur after drying. Method B (the wet sieving method) is applicable to products which are susceptible to blinding, caking, electrostatic charges or agglomeration after drying. Method B can be used to determine the primary particle size distribution of granulated products. Method B is not applicable to burnt lime and liming materials containing water-soluble constituents.  Published 2018-12 Edition : 1 Number of pages : 14 Technical Committee 65.080 Fertilizers
ISO 20978:2020 Liming material — Determination of neutralizing value — Titrimetric methods This document specifies two methods for the determination of the neutralizing value (NV) of liming materials. Method A is applicable to all liming materials except silicate liming materials. NOTE 1 Examples of hard liming materials are limestone and dolomite. Examples of soft liming materials are chalk, marl and burnt lime. Method B is applicable to all liming materials. Neither method correctly takes into account the potential neutralizing value of material containing more than 3 % P2O5. For a more accurate agronomic assessment of products containing more than 3 % P2O5, EN 14984[8] is used to determine the liming efficiency. NOTE 2 The methods described in ISO 6598 and ISO 7497 can be used for the determination of P2O5 content. Further information on P analyses is given in References [5] and [6]. NOTE 3 Carbonate consumes H+ and removes acidity in solution with subsequent dissociation to H2O and CO2. Forms of orthophosphate can consume H+ but are not dissociated to molecular forms that remove acidity. The acidity is back titrated with alkali causing an underestimation of NV.  Published 2020-05 Edition : 1 Number of pages : 15 Technical Committee 65.080 Fertilizers
ISO 21263:2017 Slow-release fertilizers — Determination of the release of the nutrients — Method for coated fertilizers ISO 21263:2017 specifies a method for the determination of the slow release properties of nutrients from coated fertilizers. pH-dependent hydrolysis and degradation by biological or microbial mechanisms are excluded. The specified method is only applicable to products releasing any nutrients by means of a non-biological process (i.e. those where the nutrients are released by a physical mechanism). Microbial attack on the coating (e.g. sulfur coated fertilizers) and the consequences thereof are not measurable by the technique described. This method involves a lengthy process which may not be appropriate for day to day testing purposes. Accelerated methods can be used provided they are correlated with this document. An example of such an accelerated method is described in Annex B. Regression analysis can also be used for this purpose.  Published 2017-12 Edition : 1 Number of pages : 9 Technical Committee 65.080 Fertilizers
ISO 22018:2021 Fertilizers, soil conditioners and beneficial substances — Determination of EDTA soluble phosphorus content in inorganic fertilizers This document specifies the method for the determination of the EDTA soluble phosphorus content of inorganic fertilizers. The method is applicable for fertilizers composed of or blended from multiple sources such as superphosphate, ammonium phosphate, triple superphosphate, and/or nitrophosphate. It is not suitable for fertilizers containing calcium magnesium phosphates.  Published 2021-07 Edition : 1 Number of pages : 14 Technical Committee 65.080 Fertilizers
ISO 22145:2021 Fertilizers and soil conditioners — Mineral soil amendments — Determination of total calcium and magnesium content This document establishes an overview of the relevant methods for the determination of calcium and magnesium as defined in ISO 8157. This document is applicable to any mineral soil amendment, neutral, basic or acid containing calcium and/or magnesium.  Published 2021-02 Edition : 1 Number of pages : 4 Technical Committee 65.080 Fertilizers
ISO 22146:2018 Carbonate liming materials — Determination of reactivity — Automatic titration method with citric acid This document specifies a method for determining the reactivity of calcium carbonate and calcium magnesium carbonate liming materials. It assesses the speed and effectiveness of their neutralising potential by automatic titration with citric acid. This method is applicable only to liming materials with a maximum particle size of 6,3 mm determined in accordance with ISO 20977. NOTE For marble dolomite (BET procedure as defined in ISO 9277 below 500 m2/kg), see EN 14984.  Published 2018-12 Edition : 1 Number of pages : 13 Technical Committee 65.080 Fertilizers
ISO 22862:2021 Fertilizers and soil conditioners — Compound fertilizer — General requirements This document specifies general requirements for the testing, sampling and preparation of test samples and the marking, labelling, packaging, transport and storage of compound fertilizers. This document is applicable to inorganic solid compound fertilizers. This document is not applicable to controlled-release compound fertilizers.  Published 2021-11 Edition : 1 Number of pages : 7 Technical Committee 65.080 Fertilizers
ISO 6785:2001 | IDF 93:2001 Milk and milk products — Detection of Salmonella spp. ISO 6785|IDF 93:2001 specifies a method for the detection of Salmonella spp. in milk and milk products.  Withdrawn 2001-05 Edition : 2 Number of pages : 23 Technical Committee 07.100.30 Food microbiology
ISO 22887:2020 Determination of total sulfur in fertilizers by high temperature combustion This document specifies a method to measure the total sulfur content in fertilizer and soil conditioner materials. This method is applicable for measuring total sulfur concentration in solid and liquid fertilizers and its raw inputs in the range of 0,1 % to 97 %.  Published 2020-11 Edition : 1 Number of pages : 8 Technical Committee 65.080 Fertilizers
ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers This document specifies the test procedure for the determination of the salt out temperature (SOT), also known as the crystallization temperature (CT) of liquid (fluid) fertilizers, using an inexpensive and simple technique. This method might not be applicable to the binary and ternary fertilizers, especially with regards to the last crystal to disappear (LCTD). Some of these exceptions are discussed in the procedure (Clause 8).  Published 2020-09 Edition : 1 Number of pages : 10 Technical Committee 65.080 Fertilizers
ISO 25475:2016 Fertilizers — Determination of ammoniacal nitrogen ISO 25475:2016 specifies a method for the determination of the ammoniacal nitrogen content in fertilizers. The method is applicable to all nitrogenous fertilizers including compound fertilizers, in which nitrogen is found exclusively either in the form of ammonium salts or ammonium salts together with nitrates. ISO 25475:2016 is not applicable to fertilizers containing urea, cyanamide or other organic nitrogenous compounds.  Published 2016-04 Edition : 1 Number of pages : 12 Technical Committee 65.080 Fertilizers
ISO 25705:2016 Fertilizers — Determination of urea condensates using high-performance liquid chromatography (HPLC) — Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) ISO 25705:2016 specifies methods for the determination of isobutylidene diurea (IBDU), Crotonylidene diurea (CDU) (method A) and methylene-urea oligomers (MU) (method B) in fertilizers using high-performance liquid chromatography (HPLC). The method is applicable to all fertilizers which do not contain interfering organic compounds.  Published 2016-04 Edition : 1 Number of pages : 17 Technical Committee 65.080 Fertilizers
ISO 5061:1983 Animal feeding stuffs — Determination of castor oil seed husks — Microscopical method The limit of detection is 5 mg/kg. The method consists in boiling a test portion successively with nitric acid solution and sodium hydroxide solution, washing and separation of the residue by decantation, drying, microscopical identification of fragments of oil seed husks and weighing. 7 figures show examples of the structure under low magnification.  Withdrawn 1983-07 Edition : 1 Number of pages : 6 Technical Committee 65.120 Animal feeding stuffs
ISO 5061:2002 Animal feeding stuffs — Determination of castor oil seed husks — Microscope method This International Standard specifies a method for the determination of castor oil seed (Ricinus communis) husks in single and compound animal feeding stuffs and, in particular, in oilseed residues. The limits of detection is 5 mg/kg. The method requires final microscopical identification of the isolated husks. This last phase therefore requires a specialist who has had sufficient experience in this type of identification and who is experienced in microscopic techniques.  Published 2002-04 Edition : 2 Number of pages : 7 Technical Committee 65.120 Animal feeding stuffs
ISO 5510:1984 Animal feeding stuffs — Determination of available lysine The method consists in hydrolysing with hydrochloric acid of a ground test portion, dollowed by separation of the total lysine by column chromatography and determination by spectrometry at 570 nm. Reaction of a second ground test portion with an ethanolic solution of 2,4-dinitrofluorobenzene in an alkaline medium, purification, then hydrolysis with hydrochloric acid, separation of the non-available lysine by column chromatography, and determination by spectrometry at 570 nm.  Published 1984-11 Edition : 1 Number of pages : 5 Technical Committee 65.120 Animal feeding stuffs
ISO 5514:1979 Soya bean products — Determination of cresol red index The method permits an assesment of the degree to which products derived from soya beans have been cooked. It consists in mixing of a ground test portion with a standard cresol red solution, followed by spectrophotometric determination of the residual colouring material in the solution aftzer a specified time by comparison with the initial cresol red solution.  Withdrawn 1979-05 Edition : 1 Number of pages : 2 Technical Committee 65.120 Animal feeding stuffs ; 67.200.20 Oilseeds
ISO 5983-1:2005 Animal feeding stuffs — Determination of nitrogen content and calculation of crude protein content — Part 1: Kjeldahl method ISO 5983-1:2005 specifies a method for the determination of the nitrogen content of animal feeding stuffs by the Kjeldahl process, and a method for the calculation of the crude protein content. The method does not measure oxidized forms of nitrogen or heterocyclic nitrogen compounds. This method does not distinguish between protein nitrogen and non-protein nitrogen. If it is important to determine the content of non-protein nitrogen, an appropriate method should be used.  Published 2005-07 Edition : 1 Number of pages : 10 Technical Committee 65.120 Animal feeding stuffs
ISO 5983-1:2005/Cor 1:2008 Animal feeding stuffs — Determination of nitrogen content and calculation of crude protein content — Part 1: Kjeldahl method — Technical Corrigendum 1  Published 2008-09 Edition : 1 Number of pages : 1 Technical Committee 65.120 Animal feeding stuffs
ISO 5983-2:2005 Animal feeding stuffs — Determination of nitrogen content and calculation of crude protein content — Part 2: Block digestion/steam distillation method ISO 5983-2:2005 specifies a method for the determination of nitrogen content of animal feeding stuffs according to the Kjeldahl method, and a method for the calculation of the crude protein content. It concerns a semi-micro rapid routine method using block-digestion, copper catalyst and steam distillation into boric acid. The method is applicable to the determination of greater than 0,5 % Kjeldahl nitrogen in animal feeding stuffs, pet foods and their raw materials. The method does not measure oxidized forms of nitrogen nor heterocyclic nitrogen compounds. The method does not distinguish between protein nitrogen and non-protein nitrogen.  Withdrawn 2005-07 Edition : 1 Number of pages : 14 Technical Committee 65.120 Animal feeding stuffs
ISO 5983-2:2009 Animal feeding stuffs — Determination of nitrogen content and calculation of crude protein content — Part 2: Block digestion and steam distillation method ISO 5983-2:2009 specifies a method for the determination of nitrogen content of animal feeding stuffs according to the Kjeldahl method, and a method for the calculation of the crude protein content. It is suitable for use as a semi-micro rapid routine method using block digestion, copper catalyst, and steam distillation into boric acid. The method is applicable to the determination of greater than 0,5 % mass fraction Kjeldahl nitrogen in animal feeding stuffs, pet foods, and their raw materials. The method does not measure oxidized forms of nitrogen nor heterocyclic nitrogen compounds. The method does not distinguish between protein nitrogen and non-protein nitrogen.  Published 2009-06 Edition : 2 Number of pages : 15 Technical Committee 65.120 Animal feeding stuffs
ISO 5983:1979 Animal feeding stuffs — Determination of nitrogen content and calculation of crude protein content  Withdrawn 1979-12 Edition : 1 Number of pages : 4 Technical Committee 65.120 Animal feeding stuffs
ISO 5983:1997 Animal feeding stuffs — Determination of nitrogen content and calculation of crude protein content — Kjeldahl method  Withdrawn 1997-10 Edition : 2 Number of pages : 9 Technical Committee 65.120 Animal feeding stuffs
ISO 5984:1978 Animal feeding stuffs — Determination of crude ash The method consists in decomposing of organic matter from test portion by incineration, and weighing of the ash obtained.  Withdrawn 1978-09 Edition : 1 Number of pages : 2 Technical Committee 65.120 Animal feeding stuffs
ISO 5984:2002 Animal feeding stuffs — Determination of crude ash ISO 5984:2002 specifies a method for the determination of crude ash of animal feeding stuffs.  Withdrawn 2002-11 Edition : 2 Number of pages : 6 Technical Committee 65.120 Animal feeding stuffs
ISO 5984:2002/Cor 1:2005 Animal feeding stuffs — Determination of crude ash — Technical Corrigendum 1  Withdrawn 2005-03 Edition : 2 Number of pages : 2 Technical Committee 65.120 Animal feeding stuffs
ISO 5984:2022 Animal feeding stuffs — Determination of crude ash This document specifies a method for the determination of crude ash of animal feeding stuffs.  Published 2022-04 Edition : 3 Number of pages : 7 Technical Committee 65.120 Animal feeding stuffs
ISO 5985:1978 Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid Depending on the nature of the samples are specified two procedures. Procedure A consists in decomposing of organic matter in a test portion by incineration, then treating with hydrochloric acid if the ash obtained, and filtration, followed by drying, incineration and weighing of the residue. Procedure B consists in treating of a test portion with hydrochloric acid, filtration, followed by drying and incineration. and treating of the ash as in procedure A.  Withdrawn 1978-11 Edition : 1 Number of pages : 3 Technical Committee 65.120 Animal feeding stuffs
ISO 5985:2002 Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid ISO 5985:2002 specifies two procedures for animal feeding stuffs for the determination of the ash which is insoluble in hydrochloric acid. The applicable procedure depends on the nature of the sample. Procedure A is applicable to simple organic animal feeding stuffs and to compound feeding stuffs, except those mentioned under procedure B. Procedure B is applicable to minerals, mineral mixtures and compound feeding stuffs of which the ash insoluble in hydrochloric acid exceeds 1 % (mass fraction), as determined by procedure A.  Published 2002-11 Edition : 2 Number of pages : 7 Technical Committee 65.120 Animal feeding stuffs
ISO 5985:2002/Amd 1:2015 Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid — Amendment 1  Published 2015-11 Edition : 2 Number of pages : 2 Technical Committee 65.120 Animal feeding stuffs