| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 80000-2:2009 |
Quantities and units — Part 2: Mathematical signs and symbols to be used in the natural sciences and technology |
ISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings, verbal equivalents and applications.
The recommendations in ISO 80000-2:2009 are intended mainly for use in the natural sciences and technology, but also apply to other areas where mathematics is used.
|
Withdrawn |
2009-12 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
01.060
Quantities and units
|
| ISO 7775-1:1984 |
Securities — Standard scheme for message types — Part 1: Receipt/delivery |
|
Withdrawn |
1984-10 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
03.060
Finances. Banking. Monetary systems. Insurance
|
| ISO 80000-2:2019 |
Quantities and units — Part 2: Mathematics |
This document specifies mathematical symbols, explains their meanings, and gives verbal equivalents and applications.
This document is intended mainly for use in the natural sciences and technology, but also applies to other areas where mathematics is used.
|
Published |
2019-08 |
Edition : 2 |
Number of pages : 36 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-3:2006 |
Quantities and units — Part 3: Space and time |
ISO 80000-3:2006 gives names, symbols and definitions for quantities and units of space and time. Where appropriate, conversion factors are also given.
|
Withdrawn |
2006-03 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-3:2019 |
Quantities and units — Part 3: Space and time |
This document gives names, symbols, definitions and units for quantities of space and time. Where appropriate, conversion factors are also given.
|
Published |
2019-10 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-4:2006 |
Quantities and units — Part 4: Mechanics |
ISO 80000-4:2006 specifies the names, symbols and definitions for quantities and units of classical mechanics. Where appropriate, conversion factors are also given.
|
Withdrawn |
2006-03 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-4:2019 |
Quantities and units — Part 4: Mechanics |
This document gives names, symbols, definitions and units for quantities of mechanics. Where appropriate, conversion factors are also given.
|
Published |
2019-08 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-5:2007 |
Quantities and units — Part 5: Thermodynamics |
ISO 80000-5:2007 gives names, symbols and definitions for quantities and units of thermodynamics. Where appropriate, conversion factors are also given.
|
Withdrawn |
2007-05 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-5:2019 |
Quantities and units — Part 5: Thermodynamics |
This document gives names, symbols, definitions and units for quantities of thermodynamics. Where appropriate, conversion factors are also given.
|
Published |
2019-08 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
01.060
Quantities and units
|
| IEC 80000-6:2008 |
Quantities and units — Part 6: Electromagnetism |
In IEC 80000-6:2008, names, symbols, and definitions for quantities and units of electromagnetism are given. Where appropriate, conversion factors are also given. International Standard IEC 80000-6 has been prepared by IEC technical committee 25: Quantities and units, and their letter symbols in close cooperation with ISO/TC 12, Quantities, units, symbols, conversion factors. This first edition of IEC 80000-6 cancels and replaces the second edition of ISO 31-5, published in 1992, and its amendment 1 (1998).
|
Withdrawn |
2008-03 |
Edition : 1 |
Number of pages : 58 |
Technical Committee |
01.060
Quantities and units
|
| IEC 80000-6:2022 |
Quantities and units — Part 6: Electromagnetism |
This part of IEC 80000 gives names, symbols, and definitions for quantities and units of electromagnetism. Where appropriate, conversion factors are also given.
This document is based on classical electromagnetism, i.e. mainly Maxwell’s equations. No reference is made to quantum field theories.
|
Published |
2022-11 |
Edition : 2 |
Number of pages : 70 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-7:2008 |
Quantities and units — Part 7: Light |
ISO 80000-7:2008 gives names, symbols and definitions for quantities and units for light and other electromagnetic radiation. Where appropriate, conversion factors are also given.
|
Withdrawn |
2008-11 |
Edition : 1 |
Number of pages : 44 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-7:2019 |
Quantities and units — Part 7: Light and radiation |
This document gives names, symbols, definitions and units for quantities used for light and optical radiation in the wavelength range of approximately 1 nm to 1 mm. Where appropriate, conversion factors are also given.
|
Published |
2019-08 |
Edition : 2 |
Number of pages : 34 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-8:2007 |
Quantities and units — Part 8: Acoustics |
ISO 80000-8:2007 gives names, symbols and definitions for quantities and units of acoustics. Where appropriate, conversion factors are also given.
|
Withdrawn |
2007-06 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-8:2020 |
Quantities and units — Part 8: Acoustics |
This document gives names, symbols, definitions and units for quantities of acoustics. Where appropriate, conversion factors are also given.
|
Published |
2020-02 |
Edition : 2 |
Number of pages : 9 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-9:2009 |
Quantities and units — Part 9: Physical chemistry and molecular physics |
ISO 80000-9:2009 gives names, symbols, and definitions for quantities and units of physical chemistry and molecular physics. Where appropriate, conversion factors are also given.
|
Withdrawn |
2009-04 |
Edition : 1 |
Number of pages : 37 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-9:2009/Amd 1:2011 |
Quantities and units — Part 9: Physical chemistry and molecular physics — Amendment 1 |
|
Withdrawn |
2011-06 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-9:2019 |
Quantities and units — Part 9: Physical chemistry and molecular physics |
This document gives names, symbols, definitions and units for quantities of physical chemistry and molecular physics. Where appropriate, conversion factors are also given.
|
Published |
2019-08 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-10:2009 |
Quantities and units — Part 10: Atomic and nuclear physics |
ISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic and nuclear physics. Where appropriate, conversion factors are also given.
|
Withdrawn |
2009-12 |
Edition : 1 |
Number of pages : 67 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-10:2019 |
Quantities and units — Part 10: Atomic and nuclear physics |
This document gives names, symbols, definitions and units for quantities used in atomic and nuclear physics. Where appropriate, conversion factors are also given.
|
Published |
2019-08 |
Edition : 2 |
Number of pages : 45 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-11:2008 |
Quantities and units — Part 11: Characteristic numbers |
ISO 80000-11:2008 gives the names, symbols and definitions for characteristic numbers used in the description of transport phenomena.
|
Withdrawn |
2008-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-11:2019 |
Quantities and units — Part 11: Characteristic numbers |
This document gives names, symbols and definitions for characteristic numbers used in the description of transport and transfer phenomena.
|
Published |
2019-10 |
Edition : 2 |
Number of pages : 50 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-12:2009 |
Quantities and units — Part 12: Solid state physics |
ISO 80000-12:2009 gives names, symbols and definitions for quantities and units of solid state physics. Where appropriate, conversion factors are also given.
|
Withdrawn |
2009-05 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
01.060
Quantities and units
|
| ISO 80000-12:2019 |
Quantities and units — Part 12: Condensed matter physics |
This document gives names, symbols, definitions and units for quantities of condensed matter physics. Where appropriate, conversion factors are also given.
|
Published |
2019-08 |
Edition : 2 |
Number of pages : 15 |
Technical Committee |
01.060
Quantities and units
|
| IEC 80000-13:2008 |
Quantities and units — Part 13: Information science and technology |
In IEC 80000-13:2008, names, symbols and definitions for quantities and units used in information science and technology are given. Where appropriate, conversion factors are also given. International Standard IEC 80000-13 has been prepared by IEC technical committee 25: Quantities and units, and their letter symbols in co-operation with ISO/TC 12. This standard cancels and replaces subclauses 3.8 and 3.9 of IEC 60027-2:2005. The only significant change is the addition of explicit definitions for some quantities.
|
Published |
2008-03 |
Edition : 1 |
Number of pages : 34 |
Technical Committee |
01.060
Quantities and units
|
| IEC 80000-14:2008 |
Quantities and units — Part 14: Telebiometrics related to human physiology |
In IEC 80000-14:2008, names, symbols, and definitions for quantities and units of telebiometrics related to human physiology are given. This part of IEC 80000 encompasses quantities and units for physiological, biological or behavioural characteristics that might provide input or output to telebiometric identification or verification systems (recognition systems), including any known detection or safety thresholds. It also includes quantities and units concerned with effects on a human being caused by the use of a telebiometric device. International Standard IEC 80000-14 has been prepared by IEC technical committee 25: Quantities and units, and their letter symbols in co-operation with ISO/TC 12.
|
Withdrawn |
2008-03 |
Edition : 1 |
Number of pages : 91 |
Technical Committee |
01.060
Quantities and units
|
| IEC/CD 80000-15 |
Quantities and units — Part 15: Logarithmic and related quantities |
|
Under development |
|
Edition : 1 |
|
Technical Committee |
01.060
Quantities and units
|
| ISO 7010:2019/Amd 1:2020 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 1 |
|
Published |
2020-01 |
Edition : 3 |
Number of pages : 7 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 32:1977 |
Gas cylinders for medical use — Marking for identification of content |
Cancels and replaces ISO recommendation R 32-1957, and its amendment 1-1966. Establishes a system of marking and a series of colours for the identification of the content of gas cylinders. In the case of gas mixtures, the cylinder shall bear the appropriate colours for the gases comprising the mixture, such colours to be visible from the valve end.
|
Published |
1977-05 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
;
11.040.10
Anaesthetic, respiratory and reanimation equipment
|
| ISO/R 408:1964 |
Safety colours |
|
Withdrawn |
1964-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
|
| ISO/R 443:1965 |
Marking of aircraft gas cylinders |
|
Withdrawn |
1965-07 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
;
49.080
Aerospace fluid systems and components
|
| ISO/R 508:1966 |
Identification colours for pipes conveying fluids in liquid or gaseous condition in land installations and on board ships |
|
Withdrawn |
1966-10 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
01.070
Colour coding
;
47.020.30
Piping systems
|
| ISO 1769:1975 |
Laboratory glassware — Pipettes — Colour coding |
A system of color coding is specified for one-mark pipettes for identification of nominal capacities, and for graduated pipettes for identification of nominal capacities and unit of subdivision. The color code bands for the different capacities are tabled and the method of marking is specified. Suitable requirements and test methods for the durability of the colours are intended to be considered at a later date.
|
Published |
1975-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
;
17.060
Measurement of volume, mass, density, viscosity
|
| ISO 2574:1994 |
Aircraft — Electrical cables — Identification marking |
Specifies the way in which single-core, multi-core and coaxial cables used in the wiring of aircraft are to be marked as to type, size, origin, date etc. in order to facilitate servicing, the investigation of faults and replacement. Also specifies the approved methods for the marking of cores. Supplements those standards relating to marking that already exist. Allows for the codification of manufacturer's identities by individual countries.
|
Published |
1994-06 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
01.070
Colour coding
;
49.060
Aerospace electric equipment and systems
|
| ISO 3864-2:2004 |
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
ISO 3864-2:2004 establishes additional principles to ISO 3864-1 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment. The purpose of a product safety label is to alert persons to a specific hazard and to identify how the hazard can be avoided.
ISO 3864-2:2004 is applicable to all products in all industries where safety-related questions can be posed. However, it is not applicable to safety labels used for chemicals, for the transport of dangerous substances and preparations, and in those sectors subject to legal regulations which differ from certain provisions of this document.
The design principles incorporated in ISO 3864-2:2004 are intended to be used by all ISO Technical Committees and anyone designing product safety labels in the development of product safety label standards for their industries or services.
Statutory or regulatory requirements in some countries may differ from some requirements given in ISO 3864-2:2004. To facilitate international standardization of product safety labels, ISO 3864-2:2004 should be considered when revising regulations.
IMPORTANT -- The colours represented in the electronic file of ISO 3864-2:2004 can be neither viewed on screen nor printed as true representations. Although the copies of ISO 3864-2:2004 printed by ISO have been produced to correspond (with an acceptable tolerance as judged by the naked eye) to the colour requirements, it is not intended that these printed copies be used for colour matching. Instead, refer to the colorimetric and photometric properties specified in ISO 3864-1:2002 and ISO 3864-2:2004. As guidelines, references from colour order systems are provided in ISO 3864-2:2004 for safety colour orange and ISO 3864-1:2002 for other safety colours.
|
Withdrawn |
2004-10 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
01.070
Colour coding
;
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 3864-2:2004/Amd 1:2011 |
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels — Amendment 1: Revision of Table B.1 |
|
Withdrawn |
2011-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
01.070
Colour coding
;
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7711-3:1992 |
Dental rotary instruments — Diamond instruments — Part 3: Grit sizes, designation and colour code |
Applies to all types of diamond rotary instruments independent of type and shape. Attention is drawn to ISO 6360-1 and ISO 6360-2 which specify a 15 digit number for the identification of dental rotary instruments of all types.
|
Withdrawn |
1992-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
;
11.060.20
Dental equipment
|
| ISO 7010:2019/Amd 2:2020 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 2 |
|
Published |
2020-11 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 3864-2:2016 |
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
ISO 3864-2:2016 establishes additional principles to ISO 3864‑1 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment. The purpose of a product safety label is to alert persons to a specific hazard and to identify how the hazard can be avoided.
ISO 3864-2:2016 is applicable to all products in all industries where safety-related questions can be posed. However, it is not applicable to safety labels used
- for chemicals,
- for the transport of dangerous substances and preparations and
- in those sectors subject to legal regulations which differ from certain provisions of this document.
The design principles incorporated in this document are intended to be used by all ISO Technical Committees and anyone designing product safety labels in the development of product safety label standards for their industries or services.
|
Published |
2016-12 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
01.070
Colour coding
;
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 3864:1984 |
Safety colours and safety signs |
Prescribes graphic symbols for the purposes of preventing accidents and health hazards and meeting emergencies. The use of safety colours and safety signs does not replace proper working instructions and precautionary measures.
|
Withdrawn |
1984-03 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
01.070
Colour coding
;
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 5571:1981 |
Shipbuilding — Identification colours for schemes for ventilation systems |
Specifies colours for functional plans to be used for ventilation systems on board ships only when identification by colour is necessary.
|
Withdrawn |
1981-04 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
01.070
Colour coding
;
47.020.90
Marine ventilation, air conditioning and heating systems
|
| ISO 6009:1981 |
Hypodermic needles for single use — Colour coding for identification |
|
Withdrawn |
1981-04 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
01.070
Colour coding
;
11.040.20
Transfusion, infusion and injection equipment
|
| ISO 6009:1988 |
Hypodermic needles for single use — Colour coding for identification |
|
Withdrawn |
1988-08 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
01.070
Colour coding
;
11.040.20
Transfusion, infusion and injection equipment
|
| ISO 6009:1992 |
Hypodermic needles for single use — Colour coding for identification |
Establishes a colour code for the identification of needles of nominal outside diameters in the range 0,3 mm to 3,4 mm. Applies to normal-walled, thin-walled and extra-thin-walled needles and to opaque and translucent colours. Annexes B and C describe colour zones for opaque colours and colour samples for opaque colours.
|
Withdrawn |
1992-11 |
Edition : 3 |
Number of pages : 8 |
Technical Committee |
01.070
Colour coding
;
11.040.25
Syringes, needles and catheters
|
| ISO 6009:1992/Cor 1:2008 |
Hypodermic needles for single use — Colour coding for identification — Technical Corrigendum 1 |
|
Withdrawn |
2008-03 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
;
11.040.25
Syringes, needles and catheters
|
| ISO 6009:2016 |
Hypodermic needles for single use — Colour coding for identification |
ISO 6009:2016 establishes a colour code for the identification of single-use hypodermic needles of designated metric sizein the range of 0,18 mm (34 Gauge) to 3,4 mm (10 Gauge) . It applies to regular-walled, thin-walled, extra-thin-walled and ultra-thin walled needles, and to opaque and translucent colours.
It is not applicable to pen-needles.
|
Published |
2016-08 |
Edition : 4 |
Number of pages : 6 |
Technical Committee |
01.070
Colour coding
;
11.040.25
Syringes, needles and catheters
|
| ISO 6217:1982 |
Shipbuilding — Inland navigation — Pilot craft — Identification painting and inscriptions |
Helps to permit identification of pilot crafts in heavy weather, in order to improve the efficiency of pilot service and the safety of navigation. Is applicable to pilot craft used in closed waters, estuaries and open road-steads to bring and take off pilot to merchant ships. The applicability of the requirements to pilot craft navigating under a navy flag is determined by the competent authorities of the relevant country.
|
Published |
1982-08 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.070
Colour coding
;
47.060
Inland navigation vessels
|
| ISO 7001:2007/Amd 2:2015 |
Graphical symbols — Public information symbols — Amendment 2 |
|
Withdrawn |
2015-04 |
Edition : 3 |
Number of pages : 17 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7711-3:2004 |
Dentistry — Diamond rotary instruments — Part 3: Grit sizes, designation and colour code |
ISO 7711-3:2004 specifies the designation, colour code and grit sizes for diamond rotary instruments which are used commonly in a dental surgery. It applies to all types of dental diamond rotary instruments independent of type and shape.
NOTE Attention is drawn to ISO 6360 which specifies a number coding system for the identification of dental rotary instruments of all types.
|
Withdrawn |
2004-11 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
01.070
Colour coding
;
11.060.20
Dental equipment
|
| ISO 8843:1991 |
Aircraft — Crimp-removable contacts for electrical connectors — Identification system |
The system specified consists of two colour bands around the external diameter of the crimp barrel and, for thermocouple contacts, of additional letters or of a colour point.
|
Withdrawn |
1991-12 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
;
49.060
Aerospace electric equipment and systems
|
| ISO 8843:2005 |
Aircraft — Crimp-removable contacts for electrical connectors — Identification system |
ISO 8843:2005 establishes a system for identifying crimp-removable contacts for electrical connectors. The system specified in this International Standard consists of two colour bands around the external diameter of the crimp barrel and, for thermocouple or high-temperature contacts, of additional letters or of a colour point; the system, however, does not preclude further means being used to identify additional parameters, such as cable size and material.
This contact identification system applies, when specified, to ISO standard contacts. The use of the system is recommended for contacts of both the preferred and non-preferred types. In contacts of the preferred type, the contact active portion and the wire gauge accepted by the contact barrel have the same size. In contacts of the non-preferred type, the size of the active portion of the contact differs from the wire gauge accepted by the crimp barrel.
|
Published |
2005-07 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
01.070
Colour coding
;
49.060
Aerospace electric equipment and systems
|
| ISO 8843:2005/Amd 1:2012 |
Aircraft — Crimp-removable contacts for electrical connectors — Identification system — Amendment 1 |
|
Published |
2012-09 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
01.070
Colour coding
;
49.060
Aerospace electric equipment and systems
|
| ISO 9095:1990 |
Steel tubes — Continuous character marking and colour coding for material identification |
|
Withdrawn |
1990-03 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
01.070
Colour coding
;
23.040.10
Iron and steel pipes
|
| ISO 9247:1990 |
Earth-moving machinery — Electrical wires and cables — Principles of identification and marking |
|
Published |
1990-09 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
;
53.100
Earth-moving machinery
|
| ISO 9247:1990/Amd 1:1998 |
Earth-moving machinery — Electrical wires and cables — Principles of identification and marking — Amendment 1 |
|
Published |
1998-12 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
01.070
Colour coding
;
53.100
Earth-moving machinery
|
| ISO 10243:1991 |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding |
Lays down the technical specifications for springs made from rectangular wires. The springs are classified into the spring rates: light, medium, strong and extra strong. Each marked by a colour code.
|
Withdrawn |
1991-08 |
Edition : 1 |
Number of pages : 17 |
Technical Committee |
01.070
Colour coding
;
25.120.10
Forging equipment. Presses. Shears
|
| ISO 10243:2010 |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding |
ISO 10243:2010 establishes the technical specifications for compression springs made from rectangular wires.
It is applicable to springs which are set. It does not attempt to specify the quality of the springs themselves, nor all of their dimensions (e.g. cross-section), their material or their length of life.
The springs are classified into spring rates: light, medium, strong and extra strong, and a colour code is given for each spring rate.
|
Withdrawn |
2010-02 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
01.070
Colour coding
;
25.120.10
Forging equipment. Presses. Shears
|
| ISO 10243:2010/Amd 1:2011 |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding — Amendment 1 |
|
Withdrawn |
2011-12 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
01.070
Colour coding
;
25.120.10
Forging equipment. Presses. Shears
|
| ISO 7001:2007/Amd 3:2016 |
Graphical symbols — Public information symbols — Amendment 3 |
|
Withdrawn |
2016-06 |
Edition : 3 |
Number of pages : 27 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 10243:2019 |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding |
This document establishes the technical specifications for compression springs made from rectangular wires.
The parameters set in this document are applicable to springs which are set. This document does not attempt to specify the quality of the springs themselves, nor all of their dimensions (e.g. cross-section), their material or their length of life.
The springs are classified into spring rates: light, medium, strong and extra strong. For each spring rate, this document gives a colour code.
|
Published |
2019-05 |
Edition : 3 |
Number of pages : 19 |
Technical Committee |
01.070
Colour coding
;
25.120.10
Forging equipment. Presses. Shears
|
| ISO 10625:1996 |
Equipment for crop protection — Sprayer nozzles — Colour coding for identification |
Specifies the system of colour coding for identification of flat nozzle tips used in equipment for agricultural crop protection.
|
Withdrawn |
1996-11 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.070
Colour coding
;
65.060.40
Plant care equipment
|
| ISO 10625:1996/Cor 1:1998 |
Equipment for crop protection — Sprayer nozzles — Colour coding for identification — Technical Corrigendum 1 |
|
Withdrawn |
1998-05 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
01.070
Colour coding
;
65.060.40
Plant care equipment
|
| ISO 10625:2005 |
Equipment for crop protection — Sprayer nozzles — Colour coding for identification |
ISO 10625:2005 specifies the system of colour coding for identification of all types of hydraulic spray nozzles, such as flat and cone nozzles used for the application of crop protection products in agriculture. It is not applicable to nozzles where there is more than one component influencing flow rate, and might not be applicable to liquid fertiliser applications. It allows for flow recognition on small parts in order to avoid any confusion under normal conditions of use.
|
Withdrawn |
2005-07 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
01.070
Colour coding
;
65.060.40
Plant care equipment
|
| ISO 10625:2018 |
Equipment for crop protection — Sprayer nozzles — Colour coding for identification |
This document specifies the system of colour coding for flow rate identification of nozzles used on sprayers.
It is applicable to hydraulic energy nozzles such as flat and cone nozzles used for the application of crop protection products.
This document is not applicable to adjustable nozzles.
It allows for flow recognition on small parts in order to avoid any confusion under normal conditions of use.
|
Published |
2018-08 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
01.070
Colour coding
;
65.060.40
Plant care equipment
|
| ISO 14726-1:1999 |
Ships and marine technology — Identification colours for the content of piping systems — Part 1: Main colours and media |
|
Withdrawn |
1999-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
01.070
Colour coding
;
47.020.30
Piping systems
|
| ISO 14726-2:2002 |
Ships and marine technology — Identification colours for the content of piping systems — Part 2: Additional colours for different media and/or functions |
ISO 14726-2 specifies additional colours to be used with the main colours given in ISO 14726-1 for marking of piping systems in accordance with the content and/or function on board ships and marine structures.
Additional colours may not be used if no differentiation of a single main colour on board is needed.
ISO 14726-2 does not apply to piping systems for medical gases, industrial gases and cargos.
It gives no definitions for the listed media and/or functions.
These additional colours may also be used, together with the main colours, for piping systems on drawings and diagrams.
|
Withdrawn |
2002-07 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
01.070
Colour coding
;
47.020.30
Piping systems
|
| ISO 14726:2008 |
Ships and marine technology — Identification colours for the content of piping systems |
ISO 14726:2008 specifies main colours and additional colours for identifying piping systems in accordance with the content or function on board ships and marine structures.
These colours can also be used for piping systems on drawings and diagrams.
ISO 14726:2008 does not apply to piping systems for medical gases, industrial gases and cargo.
ISO 14726:2008 can also be used for land installations.
|
Published |
2008-05 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.070
Colour coding
;
47.020.30
Piping systems
|
| ISO 22324:2015 |
Societal security — Emergency management — Guidelines for colour-coded alerts |
ISO 22324:2015 provides guidelines for the use of colour codes to inform people at risk as well as first response personnel about danger and to express the severity of a situation. It is applicable to all types of hazard in any location.
This International Standard does not cover the method for displaying colour codes, detailed ergonomic considerations related with viewing displays, or safety signs covered by ISO 3864‑1.
|
Withdrawn |
2015-06 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
01.070
Colour coding
;
03.100.01
Company organization and management in general
|
| ISO 22324:2022 |
Security and resilience – Emergency management – Guidelines for colour-coded alert |
This document gives guidance on the use of colour codes to inform people at risk as well as first response personnel about danger and to express the severity of a situation.
This document is applicable to all types of hazard in any location.
This document does not apply to the method for displaying colour codes, detailed ergonomic considerations related to viewing displays or safety signs covered by ISO 3864-1.
|
Published |
2022-12 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
01.070
Colour coding
;
03.100.01
Company organization and management in general
|
| ISO Guide 11:1978 |
Procedure for establishing international Standards on graphic symbols |
|
Withdrawn |
1978-09 |
Edition : 1 |
|
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO/R 557:1967 |
Symbols, dimensions and layout for safety signs |
|
Withdrawn |
1967-03 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 3864-1:2002 |
Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs in workplaces and public areas |
ISO 3864-1:2002 establishes the safety identification colours and design principles for safety signs to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs.
ISO 3864-1:2002 is applicable to workplaces and all locations and all sectors where safety-related questions may be posed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation which may differ.
It is important to note that the colours represented in the electronic file of ISO 3864-1:2002 can be neither viewed on screen nor printed as true representations. Although the copies of ISO 3864-1:2002 printed by ISO have been produced to correspond (with an acceptable tolerance as judged by the naked eye) to the colour requirements, it is not intended that these printed copies be used for colour matching and it is necessary to refer to the colorimetric and photometric properties specified in ISO 3864-1:2002. References are also provided from colour order systems for information.
|
Withdrawn |
2002-05 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 3864-1:2011 |
Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings |
ISO 3864-1:2011 establishes the safety identification colours and design principles for safety signs and safety markings to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs.
ISO 3864-1:2011 is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation which may differ.
|
Published |
2011-04 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 3864-2:2004 |
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
ISO 3864-2:2004 establishes additional principles to ISO 3864-1 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment. The purpose of a product safety label is to alert persons to a specific hazard and to identify how the hazard can be avoided.
ISO 3864-2:2004 is applicable to all products in all industries where safety-related questions can be posed. However, it is not applicable to safety labels used for chemicals, for the transport of dangerous substances and preparations, and in those sectors subject to legal regulations which differ from certain provisions of this document.
The design principles incorporated in ISO 3864-2:2004 are intended to be used by all ISO Technical Committees and anyone designing product safety labels in the development of product safety label standards for their industries or services.
Statutory or regulatory requirements in some countries may differ from some requirements given in ISO 3864-2:2004. To facilitate international standardization of product safety labels, ISO 3864-2:2004 should be considered when revising regulations.
IMPORTANT -- The colours represented in the electronic file of ISO 3864-2:2004 can be neither viewed on screen nor printed as true representations. Although the copies of ISO 3864-2:2004 printed by ISO have been produced to correspond (with an acceptable tolerance as judged by the naked eye) to the colour requirements, it is not intended that these printed copies be used for colour matching. Instead, refer to the colorimetric and photometric properties specified in ISO 3864-1:2002 and ISO 3864-2:2004. As guidelines, references from colour order systems are provided in ISO 3864-2:2004 for safety colour orange and ISO 3864-1:2002 for other safety colours.
|
Withdrawn |
2004-10 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
01.070
Colour coding
;
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 3864-2:2004/Amd 1:2011 |
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels — Amendment 1: Revision of Table B.1 |
|
Withdrawn |
2011-03 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
01.070
Colour coding
;
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7001:2007/Amd 4:2017 |
Graphical symbols — Public information symbols — Amendment 4 |
|
Withdrawn |
2017-05 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 3864-2:2016 |
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
ISO 3864-2:2016 establishes additional principles to ISO 3864‑1 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment. The purpose of a product safety label is to alert persons to a specific hazard and to identify how the hazard can be avoided.
ISO 3864-2:2016 is applicable to all products in all industries where safety-related questions can be posed. However, it is not applicable to safety labels used
- for chemicals,
- for the transport of dangerous substances and preparations and
- in those sectors subject to legal regulations which differ from certain provisions of this document.
The design principles incorporated in this document are intended to be used by all ISO Technical Committees and anyone designing product safety labels in the development of product safety label standards for their industries or services.
|
Published |
2016-12 |
Edition : 2 |
Number of pages : 19 |
Technical Committee |
01.070
Colour coding
;
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 3864-4:2011 |
Graphical symbols — Safety colours and safety signs — Part 4: Colorimetric and photometric properties of safety sign materials |
ISO 3864-4:2011 establishes the colorimetric and photometric requirements and test methods for the colours of safety signs to be used in workplaces and public areas. It provides the colorimetric and photometric specifications for the named safety and contrast colours prescribed in ISO 38641.
The physical requirements that safety signs have to meet are primarily related to daytime colour and normally lit environments. ISO 3864-4:2011 also includes the colorimetric requirements and test methods for safety signs and phosphorescent material which also operate in unlit environments.
ISO 3864-4:2011 is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation that may differ.
The colorimetric and photometric properties of retroreflective safety signs, retroreflective materials combined with fluorescent or phosphorescent materials, or luminous safety signs activated by a radioactive source are not specified in ISO 3864-4:2011.
|
Published |
2011-03 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 3864:1984 |
Safety colours and safety signs |
Prescribes graphic symbols for the purposes of preventing accidents and health hazards and meeting emergencies. The use of safety colours and safety signs does not replace proper working instructions and precautionary measures.
|
Withdrawn |
1984-03 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
01.070
Colour coding
;
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7001:1980 |
Public information symbols |
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7001:1980/Add 1:1985 |
Public information symbols — Addendum 1 |
|
Withdrawn |
1985-12 |
Edition : 1 |
|
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7001:1990 |
Public information symbols |
|
Withdrawn |
1990-02 |
Edition : 2 |
Number of pages : 60 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7001:1990/Amd 1:1993 |
Public information symbols — Amendment 1 |
Adds names of the new symbols 051 to 057 to the numerical index and survey (clause 4) and the corresponding sheets to clause 5.
|
Withdrawn |
1993-06 |
Edition : 2 |
Number of pages : 8 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7001:2007 |
Graphical symbols — Public information symbols |
ISO 7001:2007 specifies graphical symbols for the purposes of public information. It is generally applicable to public information symbols in all locations and all sectors where the public has access.
ISO 7001:2007 specifies the symbol originals that may be scaled for reproduction and application purposes. The symbols may be used in conjunction with text to improve comprehension.
|
Withdrawn |
2007-11 |
Edition : 3 |
Number of pages : 56 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7001:2007/Amd 1:2013 |
Graphical symbols — Public information symbols — Amendment 1 |
|
Withdrawn |
2013-06 |
Edition : 3 |
Number of pages : 45 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7001:2007/Amd 1:2013/Cor 1:2014 |
Graphical symbols — Public information symbols — Amendment 1 — Technical Corrigendum 1 |
|
Withdrawn |
2014-04 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 4209-1:1986 |
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
|
Withdrawn |
1986-05 |
Edition : 3 |
|
Technical Committee |
83.160.10
Road vehicle tyres
|
| ISO 7001:2023 |
Graphical symbols — Registered public information symbols |
This document specifies graphical symbols for the purposes of public information.
This document is generally applicable to public information symbols in all locations and all sectors where the public has access. However, it is not applicable to safety signs or those sectors subject to specific regulations (e.g. traffic signs on public roads).
This document specifies the original symbols that can be scaled for reproduction and application purposes.
The symbols can be used in conjunction with text to improve comprehension.
|
Published |
2023-02 |
Edition : 4 |
Number of pages : 114 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7010:2003 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas |
ISO 7010:2003 prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
The shape and colour required to be used for each sign, as prescribed by ISO 3864-1, is given together with the graphical symbols contained within each sign.
ISO 7010:2003 is generally applicable to safety signs in workplaces and all locations and all sectors where safety-related questions may be posed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of ISO 7010:2003 and of ISO 3864-1.
ISO 7010:2003 specifies the safety sign originals that may be scaled for reproduction and application purposes.
Supplementary text signs may be used in conjunction with these safety signs to improve comprehension.
IMPORTANT -- The colours represented in the electronic file of this International Standard can be neither viewed on screen nor printed as true representations. Although the copies of this International Standard printed by ISO have been produced to correspond (with an acceptable tolerance as judged by the naked eye) to the requirements of ISO 3864-1, it is not intended that these printed copies be used for colour matching. Instead consult ISO 3864-1 which provides colorimetric and photometric properties together with, as a guideline, references from colour order systems.
|
Withdrawn |
2003-10 |
Edition : 1 |
Number of pages : 24 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2003/Amd 1:2006 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 1 |
|
Withdrawn |
2006-03 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2003/Amd 2:2007 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 2 |
|
Withdrawn |
2007-07 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2003/Amd 3:2007 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 3 |
|
Withdrawn |
2007-11 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2003/Amd 4:2009 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 4 |
|
Withdrawn |
2009-04 |
Edition : 1 |
Number of pages : 22 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2003/Amd 5:2010 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 5 |
|
Withdrawn |
2010-05 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2003/Amd 6:2010 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 6 |
|
Withdrawn |
2010-09 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2003/Amd 7:2010 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 7 |
|
Withdrawn |
2010-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2003/Amd 8:2011 |
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 8 |
|
Withdrawn |
2011-04 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO/IEC 9541-1:1991/Cor 3:1995 |
Information technology — Font information interchange — Part 1: Architecture — Technical Corrigendum 3 |
Contains minor technical amendments and additions only.
|
Withdrawn |
1995-07 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
35.240.30
IT applications in information, documentation and publishing
|
| ISO 7010:2011 |
Graphical symbols — Safety colours and safety signs — Registered safety signs |
ISO 7010:2011 prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical symbols is according to ISO 3864-3.
ISO 7010:2011 is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of ISO 7010:2011 and of the ISO 3864 series.
ISO 7010:2011 specifies the safety sign originals that may be scaled for reproduction and application purposes.
|
Withdrawn |
2011-06 |
Edition : 2 |
Number of pages : 124 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2011/Amd 1:2012 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 1 |
|
Withdrawn |
2012-04 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|