| Name |
Description |
Abstract |
Status |
Publication date |
Edition |
Number of pages |
Technical committee |
ICS |
| ISO 7010:2011/Amd 2:2012 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 2 |
|
Withdrawn |
2012-06 |
Edition : 2 |
Number of pages : 12 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2011/Amd 3:2012 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 3 |
|
Withdrawn |
2012-10 |
Edition : 2 |
Number of pages : 7 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2011/Amd 4:2013 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 4 |
|
Withdrawn |
2013-12 |
Edition : 2 |
Number of pages : 50 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2011/Amd 5:2014 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 5 |
|
Withdrawn |
2014-02 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2011/Amd 6:2014 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 6 |
|
Withdrawn |
2014-12 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2011/Amd 7:2016 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 7 |
|
Withdrawn |
2016-10 |
Edition : 2 |
Number of pages : 6 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2011/Amd 8:2017 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 8 |
|
Withdrawn |
2017-12 |
Edition : 2 |
Number of pages : 11 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2011/Amd 9:2018 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 9 |
|
Withdrawn |
2018-12 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019 |
Graphical symbols — Safety colours and safety signs — Registered safety signs |
This document prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
The shape and colour of each safety sign are according to ISO 3864‑1 and the design of the graphical symbols is according to ISO 3864‑3.
This document is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of this document and of the ISO 3864 series.
This document specifies the safety sign originals that can be scaled for reproduction and application purposes.
|
Published |
2019-07 |
Edition : 3 |
Number of pages : 298 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/Amd 3:2021 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 3 |
|
Published |
2021-07 |
Edition : 3 |
Number of pages : 5 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/Amd 4:2021 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 4 |
|
Published |
2021-12 |
Edition : 3 |
Number of pages : 9 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/Amd 5:2022 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 5 |
|
Published |
2022-01 |
Edition : 3 |
Number of pages : 4 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/Amd 6:2022 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 6 |
|
Published |
2022-08 |
Edition : 3 |
Number of pages : 6 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 7 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 7 |
|
Under development |
|
Edition : 3 |
|
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 127 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 127: Safety sign P074 : Child seat installation prohibited |
|
Deleted |
|
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 128 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 128: Safety sign E065 : Natural disaster outdoor refuge area |
|
Deleted |
|
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 129 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 129: Safety sign E070 : Evacuation lift for people unable to use stairs |
|
Deleted |
|
Edition : 3 |
Number of pages : 3 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 130 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 130: Safety sign M060: Hold the trolley handle |
|
Deleted |
|
Edition : 3 |
Number of pages : 3 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 131 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 131: Safety sign P073 : Do not shut lid when burners are operating |
|
Deleted |
|
Edition : 3 |
Number of pages : 3 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 132 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 132: Safety sign P075: Do not stare at light source |
|
Deleted |
|
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 133 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 133: Safety sign W079 : Warning; Hot content |
|
Deleted |
|
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 7010:2019/DAmd 134 |
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 134: Safety sign W080 : Warning; Hot steam |
|
Deleted |
|
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO/TR 7239:1984 |
Development and principles for application of public information symbols |
Provides a set of recommended procedures to be followed and sets forth the essential technical criteria which should be taken into account when developing or considering the use of graphical symbols as a means of visual pictorial communication. Applies mainly to public areas. Includes terms and definitions.
|
Withdrawn |
1984-12 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 9186-1:2007 |
Graphical symbols — Test methods — Part 1: Methods for testing comprehensibility |
ISO 9186-1:2007 specifies methods for testing the comprehensibility of graphical symbols. It includes the method to be used in testing the extent to which a variant of a graphical symbol communicates its intended message and the method to be used in testing which variant of a graphical symbol is judged the most comprehensible.
The purpose of ISO 9186-1:2007 is to ensure that graphical symbols, and signs using graphical symbols, are readily understood. The intention is to develop graphical symbols which are correctly understood by users when no supplementary (i.e. explanatory) text is presented. When such a graphical symbol cannot be obtained, it might be necessary to present a graphical symbol together with supplementary text explaining its meaning in the language of the intended users.
|
Withdrawn |
2007-02 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 9186-1:2014 |
Graphical symbols — Test methods — Part 1: Method for testing comprehensibility |
ISO 9186-1:2014 specifies a method for testing the comprehensibility of graphical symbols. It provides a measure of the extent to which a variant of a graphical symbol communicates its intended message. The purpose is to ensure that graphical symbols and signs using graphical symbols are readily understood. The intention is to encourage the development of graphical symbols which are correctly understood by users when no supplementary (i.e. explanatory) text is presented. When such a graphical symbol cannot be developed, it might be necessary to present a graphical symbol together with supplementary text explaining its meaning in the language of the intended users.
|
Published |
2014-03 |
Edition : 2 |
Number of pages : 18 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 9186-2:2008 |
Graphical symbols — Test methods — Part 2: Method for testing perceptual quality |
ISO 9186-2:2008 specifies a method for testing the perceptual quality of graphical symbols, to verify that the elements that constitute a graphical symbol are readily identifiable by the eventual user population.
|
Published |
2008-06 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 9186-3:2014 |
Graphical symbols — Test methods — Part 3: Method for testing symbol referent association |
ISO 9186-3:2014 specifies a method for testing the referent association of graphical symbols intended to communicate information to users who are familiar with what the symbol is intended to denote or represent (the referent). The referents can be specialized, so that the general public cannot be expected to be familiar with them without familiarity training. The intention is to develop graphical symbols which are correctly recognized by users familiar with the referents when no supplementary (i.e. explanatory) text is presented. When such a graphical symbol cannot be obtained, it might be necessary to present a graphical symbol together with supplementary text explaining its meaning in the language of the intended users.
NOTE 1 Alternatively, it could be necessary to inform people about the meaning of the graphical symbol by including its meaning in manuals, instructions, or training.
NOTE 2 ISO 9186‑1 specifies a method for testing the comprehensibility of graphical symbols. ISO 9186‑2 specifies a method for testing the perceptual quality of graphical symbols, the extent to which the elements of the graphical symbol can be correctly identified.
|
Published |
2014-10 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 9186:1989 |
Procedures for the development and testing of public information symbols |
|
Withdrawn |
1989-08 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 16069:2004 |
Graphical symbols — Safety signs — Safety way guidance systems (SWGS) |
ISO 16069:2004 describes the principles governing the design and application of visual components used to create a safety way guidance system (SWGS).
ISO 16069:2004 contains general principles valid both for electrically powered and for phosphorescent components. Special information which is related to the type of component is given to assist in defining the environment of use, choice of material, layout, installation and maintenance of SWGS.
ISO 16069:2004 does not cover risk assessment. Applications with different risks to the occupants typically require different layouts and types of SWGS. The specific application and exact final design of SWGS is entrusted to those persons responsible for this task.
ISO 16069:2004 also does not include the special considerations of possible tactile or audible components of SWGS, nor does it include requirements concerning the emergency escape route lighting, especially the design and application of emergency escape route lighting, unless illumination is used to mark safety equipment or special features of the escape route like the emergency exit doors or stairs.
ISO 16069:2004 is intended, by collaboration and coordination, to be used by all other Technical Committees within ISO and IEC charged with developing SWGS for their specific requirements. ISO 16069:2004 is not to be used for ships falling under regulations of the International Maritime Organization (IMO).
|
Withdrawn |
2004-11 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 16069:2017 |
Graphical symbols — Safety signs — Safety way guidance systems (SWGS) |
ISO 16069:2017 describes the principles governing the design and application of visual components used to create a safety way guidance system (SWGS).
ISO 16069:2017 contains general principles valid both for electrically powered and for phosphorescent components. Special information which is related to the type of component is given to assist in defining the environment of use, choice of material, layout, installation and maintenance of SWGS.
ISO 16069:2017 does not cover risk assessment. Applications with different risks to the occupants typically require different layouts and types of SWGS. The specific application and exact final design of SWGS is entrusted to those persons responsible for this task.
ISO 16069:2017 also does not include the special considerations of possible tactile or audible components of SWGS, nor does it include requirements for high mounted components of the emergency escape route lighting, especially the design and application of emergency escape route lighting.
ISO 16069:2017 is intended, by collaboration and coordination, to be used by all other Technical Committees within ISO and IEC charged with developing SWGS for their specific requirements. ISO 16069:2017 is not to be used for ships falling under regulations of the International Maritime Organization (IMO).
|
Published |
2017-11 |
Edition : 2 |
Number of pages : 39 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 17398:2004 |
Safety colours and safety signs — Classification, performance and durability of safety signs |
ISO 17398:2004 specifies requirements for a performance-related classification system for safety signs according to expected service environment, principal materials, photometric properties, means of illumination, fixing methods and surface. Performance criteria and test methods are specified in ISO 17398:2004 so that properties related to durability and expected service life can be characterized and specified at the time of the product's delivery to the purchaser.
ISO 17398:2004 does not cover electrical power supplies, their components or electrically powered elements. It also does not cover properties of illuminating components, but the photometric properties for the particular types of safety signs are covered.
|
Published |
2004-08 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
01.080.20
Graphical symbols for use on specific equipment
|
| ISO 20712-1:2008 |
Water safety signs and beach safety flags — Part 1: Specifications for water safety signs used in workplaces and public areas |
ISO 20712-1:2008 prescribes water safety signs intended for use in connection with the aquatic environment. It is intended for use by owners and operators of aquatic environments and by manufacturers of signs and equipment. However, it is not applicable to signalling used for maritime traffic.
The shape and colour required to be used for safety signs, as prescribed by ISO 3864-1, are given together with the graphical symbols contained within each sign. The water safety sign originals meet the design criteria of ISO 3864-3.
ISO 20712-1:2008 specifies the water safety sign originals that may be scaled for reproduction and application purposes.
ISO 20712-1:2008 includes water safety signs which require that supplementary text signs be used in conjunction with these water safety signs to improve comprehension.
|
Withdrawn |
2008-07 |
Edition : 1 |
Number of pages : 60 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 20712-2:2007 |
Water safety signs and beach safety flags — Part 2: Specifications for beach safety flags — Colour, shape, meaning and performance |
ISO 20712-2:2007 specifies requirements for the shape and colour of beach safety flags for the management of activities on coastal and inland beaches, to be used for giving information on wind and water conditions and other hazardous conditions, and to indicate the location of swimming and other aquatic activity zones extending from the beach into the water. It also specifies the colorimetric and photometric properties and the physical properties, including strength and colour fastness, of the materials from which beach safety flags are to be made.
It is not applicable to flags for use on firing ranges or to flags for use to indicate water quality or to signalling used for maritime traffic.
|
Published |
2007-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 20712-3:2008 |
Water safety signs and beach safety flags — Part 3: Guidance for use |
ISO 20712-3:2008 gives guidance for the selection and use of water safety signs as specified in ISO 20712-1 and beach safety flags as specified in ISO 20712-2, in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also provides guidance on the design and location of multiple signs.
ISO 20712-3:2008 does not apply to traffic signs for use on the public highway or maritime signalling. It is not applicable to flags for use on firing ranges or to flags used to indicate water quality. It does not cover means of escape signs and their illumination which may be present.
|
Withdrawn |
2008-08 |
Edition : 1 |
Number of pages : 26 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 20712-3:2014 |
Water safety signs and beach safety flags — Part 3: Guidance for use |
ISO 20712-3:2014 gives guidance for the selection and use of water safety signs as specified in ISO 20712‑1 and beach safety flags as specified in ISO 20712‑2, in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also provides guidance on the design and location of multiple signs.
ISO 20712-3:2014 does not apply to traffic signs for use on the public highway or maritime signalling. It is not applicable to flags for use on firing ranges or to flags used to indicate water quality. It does not cover means of escape signs and their illumination which may be present.
|
Withdrawn |
2014-03 |
Edition : 2 |
Number of pages : 28 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 20712-3:2020 |
Water safety signs and beach safety flags — Part 3: Guidance for use |
This document gives guidance for the selection and use of water safety signs as specified in ISO 7010 and beach safety flags as specified in ISO 20712-2 in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also provides guidance on the design and location of multiple signs.
This document does not apply to traffic signs for use on the public highway or maritime signalling. It is not applicable to flags for use on firing ranges or to flags used to indicate water quality. It does not cover means of escape signs and their illumination which may be present.
NOTE 1 The illustrations in this document are as accurate as possible within the limitations of the printing process.
NOTE 2 This document refers to water safety signs which were originally specified in ISO 20712-1[1]. These water safety signs have been integrated in ISO 7010, but are not specifically identified as water safety signs.
[1] This document has been withdrawn and replaced by ISO 7010.
|
Published |
2020-07 |
Edition : 3 |
Number of pages : 28 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO/DIS 20712-3 |
Water safety signs and beach safety flags — Part 3: Guidance for use |
This document gives guidance for the selection and use of water safety signs as specified in ISO 7010 and beach safety flags as specified in ISO 20712-2 in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also provides guidance on the design and location of multiple signs.
This document does not apply to traffic signs for use on the public highway or maritime signalling. It is not applicable to flags for use on firing ranges or to flags used to indicate water quality. It does not cover means of escape signs and their illumination which may be present.
NOTE 1 The illustrations in this document are as accurate as possible within the limitations of the printing process.
NOTE 2 This document refers to water safety signs which were originally specified in ISO 20712-1[1]. These water safety signs have been integrated in ISO 7010, but are not specifically identified as water safety signs.
[1] This document has been withdrawn and replaced by ISO 7010.
|
Under development |
|
Edition : 4 |
Number of pages : 22 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO/DIS 22578-2 |
Graphical symbols — Safety colours and safety signs — Part 2: Measurement of photopic luminance of phosphorescent components used in a natural disaster safety way guidance system |
This document specifies the laboratory test method for measurement of photopic luminance of phosphorescent materials to be classified in accordance with ISO 22578- Graphical symbols - Safety colours and safety signs – Natural disaster safety way guidance-system.
|
Under development |
|
Edition : 1 |
Number of pages : 6 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 22578:2022 |
Graphical symbols — Safety colours and safety signs — Natural disaster safety way guidance system |
This document specifies the principles governing the design and application of signs and plans used to create a natural disaster safety way guidance system to help people evacuate to safe areas or places of refuge in case of natural disasters (e.g. tsunamis, floods, debris flows, steep slope failures, landslides, tornados, large-scale fires, active volcanoes).
This document provides guidance on the selection and use of safety signs conforming to ISO 7010, public information symbols conforming to ISO 7001, and text on evacuation route signs, places of refuge signs and evacuation plan signs for information related to one or more particular natural disasters. Guidance on the design, location, mounting positions and maintenance of the sign components of a natural disaster safety way guidance system is also provided.
This document does not apply to the determination of the need for natural disaster safety way guidance. This document assumes that the risk assessment or requirements of an enforcing authority have established the need for such natural disaster safety way guidance systems.
This document is not applicable to the particular hazards of high winds, snow avalanches, earthquakes or hurricanes, which cause the natural disasters covered in this document.
This document is applicable to safety way guidance from natural disasters from the outside of buildings to safe areas. ISO 16069 is applicable to safety way guidance within a building to the emergency exit(s).
|
Published |
2022-02 |
Edition : 1 |
Number of pages : 32 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 22727:2007 |
Graphical symbols — Creation and design of public information symbols — Requirements |
ISO 22727:2007 specifies requirements for the creation and design of public information symbols. It specifies requirements for the design of public information symbols for submission for registration as approved public information symbols, including line width, the use of graphical symbol elements and how to indicate negation. It also specifies templates to be used in the design of public information symbols.
ISO 22727:2007 is for use by all those involved in the commissioning and the creation and design of public information symbols. It is not applicable to safety signs, including fire safety signs, or to traffic signs for use on the public highway.
Examples are given for illustrative purposes only and do not constitute requirements for particular public information symbols.
|
Published |
2007-11 |
Edition : 1 |
Number of pages : 25 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 23120:2022 |
Ships and marine technology — Graphical symbols for computer-based incident response systems |
This document specifies the graphical symbols and representations for onboard incidents, response activities and boundaries and path as well as their usage. The graphical symbols are designed to be used for representing related information in shipborne computer-based incident response systems.
|
Published |
2022-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
;
47.020.01
General standards related to shipbuilding and marine structures
|
| ISO 23456-1:2021 |
Dynamic signs in physical environments — Part 1: General requirements |
This document describes general ergonomics requirements in relation to dynamic signs, as this responsive information presentation technology changes depending on the environmental conditions in which it is used (e.g. environmental illumination, density of people).
Dynamic signs are presented adaptively to those environmental conditions.
The general requirements for dynamic signs consist of visibility (divided into conspicuity, distinctiveness, legibility and comprehensibility), visual image safety and accessibility. The requirements and recommendations for each are also described.
This document does not cover static signs.
This document does not include requirements for safety signs for the marking of escape routes.
NOTE There are some related recommendations in ISO 30061.
|
Published |
2021-09 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 23601:2009 |
Safety identification — Escape and evacuation plan signs |
ISO 23601:2009 establishes design principles for displayed escape plans that contain information relevant to fire safety, escape, evacuation and rescue of the facility's occupants. These plans may also be used by intervention forces in case of emergency.
These plans are intended to be displayed as signs in public areas and workplaces.
ISO 23601:2009 is not intended to cover the plans to be used by external safety services nor detailed professional technical drawings for use by specialists.
|
Withdrawn |
2009-02 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 23601:2020 |
Safety identification — Escape and evacuation plan signs |
This document establishes design principles for displayed escape plans that contain information relevant to fire safety, escape, evacuation and rescue of the facility's occupants. These plans may also be used by intervention forces in case of emergency.
These plans are intended to be displayed as signs in public areas and workplaces.
This document is not intended to cover the plans to be used by external safety services nor detailed professional technical drawings for use by specialists.
|
Published |
2020-10 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 28564-1:2010 |
Public information guidance systems — Part 1: Design principles and element requirements for location plans, maps and diagrams |
ISO 28564-1:2010 specifies requirements and principles for the design and application of location plans, maps and diagrams used in public areas and workplaces to assist users to understand the environment, locate facilities and determine appropriate routes to reach those facilities. These location plans, maps and diagrams are referred to as location plans in ISO 28564-1:2010.
Location plans are intended for use in, for example, shopping centres, stores, hospitals, bus and train stations, airports, sporting and entertainment complexes, urban areas, parks, gardens and countryside, public attractions, museums and office complexes.
ISO 28564-1:2010 is not applicable to the design of escape plans, nor does it cover the design of directional and location wayfinding signs.
|
Published |
2010-11 |
Edition : 1 |
Number of pages : 20 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 28564-2:2016 |
Public information guidance systems — Part 2: Guidelines for the design and use of location signs and direction signs |
ISO 28564-2:2016 gives a range of guidelines for various stages of preparation, design, construction, inspection, updating and testing which comprise a location sign or a direction sign used in public places and working areas.
ISO 28564-2:2016 is applicable to the design and use of location signs and direction signs used in all sorts of public places, such as shopping centres, stores, hospitals, bus and railway stations, airports, sporting, exhibition halls and entertainment complexes, urban areas, parks, gardens and countryside, public attractions, museums and commercial office buildings. The design and use of location signs and direction signs in working areas can also resort to the content for reference.
It is not applicable to those sectors (for example, traffic signs on a public highway), which are subject to regulations or specified design principles. However, in a given public environment or within a wayfinding and signing design brief, public information sometimes needs to be associated with other messaging, so many of the principles contained in this part of ISO 28564 can be relevant in the planning of a coordinated scheme.
|
Published |
2016-09 |
Edition : 1 |
Number of pages : 27 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 28564-3:2019 |
Public information guidance systems — Part 3: Guidelines for the design and use of information index signs |
This document specifies requirements and gives a range of guidelines for various stages of preparation, design, construction, inspection and updating that comprise an information index signs used in public places.
This document is applicable to the design and use of information index signs used in public places such as bus and railway stations, airports, shopping centres, stores, hospitals, exhibition halls, sporting and entertainment complexes, urban areas, parks, gardens and countryside, public attractions, museums and commercial office buildings. The design and use of information index signs in working areas can also use the content of this document for reference.
This document is not applicable to those sectors (for example, traffic signs on a public highway) which are subject to regulations or specified design principles. However, in a given public environment or within a wayfinding and signing design brief, where there is sometimes a need for public information to be associated with other messaging, many of the principles contained in this document can be relevant in the planning of a coordinated scheme.
|
Published |
2019-05 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7775-2:1986 |
Securities — Scheme for message types — Part 2: Order to buy/sell |
|
Withdrawn |
1986-02 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
03.060
Finances. Banking. Monetary systems. Insurance
|
| ISO 28564-4:2023 |
Public information guidance systems — Part 4: Installation and assessment |
This document specifies principles, requirements and methods for the installation of public information guidance systems. It also provides guidelines on the assessments of the outcomes of public information guidance systems.
It is intended for use by organizations providing design and installation services in the field of public information guidance systems and organizations selecting, using or developing relative assessments.
This document is applicable to the installation and assessment of public information guidance systems used in public places, such as bus and railway stations, airports, shopping centres, shops, hospitals, exhibition halls, sports and entertainment complexes, urban areas, parks, gardens and countryside, public attractions, museums and commercial office buildings.
This document is not applicable to:
— variable message signs (e.g. dynamic message signs, matrix signs and electronic traffic displays);
— sectors (e.g. traffic signs on a public highway) which are subject to specific regulations or specified installation principles; however, in a given public environment or within a wayfinding and signing design brief, public information sometimes needs to be associated with other messaging, so many of the principles contained in this document can be relevant in the planning of a coordinated scheme.
|
Published |
2023-02 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
01.080.10
Public information symbols. Signs. Plates. Labels
|
| ISO 7463:1990 |
Shipbuilding and marine structures — Symbols for computer applications |
|
Withdrawn |
1990-09 |
Edition : 1 |
Number of pages : 29 |
Technical Committee |
01.075
Character symbols
;
35.240.50
IT applications in industry
;
47.020.01
General standards related to shipbuilding and marine structures
|
| ISO 15241:2001 |
Rolling bearings — Symbols for quantities |
|
Withdrawn |
2001-08 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
01.075
Character symbols
;
21.100.20
Rolling bearings
|
| ISO 15241:2012 |
Rolling bearings — Symbols for physical quantities |
ISO 15241:2012 establishes the presentation of symbols for physical quantities (dimensions, dimensional tolerances, accuracy, load ratings, life, etc.) in the field of rolling bearings. These symbols are primarily intended for use in International Standards and ISO documents relating to rolling bearings, but they are also suitable for use in other printed materials, such as handbooks, illustrations/drawings and pamphlets.
|
Published |
2012-06 |
Edition : 2 |
Number of pages : 17 |
Technical Committee |
01.075
Character symbols
;
21.100.20
Rolling bearings
|
| ISO 15241:2012/Amd 1:2020 |
Rolling bearings — Symbols for physical quantities — Amendment 1 |
|
Published |
2020-01 |
Edition : 2 |
Number of pages : 1 |
Technical Committee |
01.075
Character symbols
;
21.100.20
Rolling bearings
|
| ISO/R 538:1967 |
Conventional signs to be used in the schemes for the installations of pipeline systems in ships |
The symbols given in the tables apply to principal parts and appliances and have been classified in the following manner: General conventional signs Pipes and pipe joints Valves, gate valves, cocks and flaps Control and regulation parts Appliances Fittings Indicating and measuring instruments
|
Withdrawn |
1967-01 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
47.020.30
Piping systems
|
| ISO 561:1974 |
Coal preparation plant — Graphical symbols |
|
Withdrawn |
1974-10 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
73.120
Equipment for processing of minerals
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 561:1989 |
Coal preparation plant — Graphical symbols |
The symbols have been selected in accordance with the following principles: a) the plants should be widely used; b) the symbols should be easy to draw and readily be distinguishable one from another; c) the principle and not the appearance of any particular type of machine should be represented, d) where a single symbol represents a group of items for which separate symbols are s-tandardized nationally, the ISO symbol should be readily distinguishable from any one of the national symbols.
|
Published |
1989-12 |
Edition : 2 |
Number of pages : 13 |
Technical Committee |
73.120
Equipment for processing of minerals
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO/DIS 561 |
Coal — Coal preparation plant — Graphical symbols |
|
Under development |
|
Edition : 3 |
Number of pages : 16 |
Technical Committee |
73.120
Equipment for processing of minerals
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 7775:1991 |
Securities — Scheme for message types |
|
Withdrawn |
1991-11 |
Edition : 1 |
Number of pages : 51 |
Technical Committee |
03.060
Finances. Banking. Monetary systems. Insurance
|
| ISO/R 644:1967 |
Conventional signs to be used in schemes for the installations of ventilation systems in ships |
The symbols given in tables have been classified in the following manner: - General conventional signs, - Ducts and duct joints, - Appliances and fittings, - Ventilators, - Various conventional signs. The general conventional signs concern symbols representing principal parts and appliances.
|
Withdrawn |
1967-12 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
47.020.90
Marine ventilation, air conditioning and heating systems
|
| ISO 701:1998 |
International gear notation — Symbols for geometrical data |
|
Published |
1998-05 |
Edition : 2 |
Number of pages : 4 |
Technical Committee |
21.200
Gears
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 710-1:1974 |
Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 1: General rules of representation |
Gives general rules for the representation of rocks and minerals. Particular symbols and ornaments for rocks and minerals are given in the relevant parts of ISO 710.
|
Published |
1974-09 |
Edition : 1 |
Number of pages : 1 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 710-2:1974 |
Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 2: Representation of sedimentary rocks |
Provides a unified series of symbols and ornaments for the representation of sedimentary rocks. The symbols and ornaments may be divided in two groups as follows: principal types; varia. They are reproduced in two tables which, being derived from a logical system, may be completed easily in case of need.
|
Published |
1974-09 |
Edition : 1 |
Number of pages : 7 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 710-3:1974 |
Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 3: Representation of magmatic rocks |
Provides a unified series of symbols and ornaments for the representation of magmatic rocks. The symbols and ornaments may be divided in two groups as follows: principal types; varia. They have been reproduced in two tables which, being derived from a logical system, may be completed easily in case of need.
|
Published |
1974-09 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 710-4:1982 |
Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 4: Representation of metamorphic rocks |
Provides a unified series of symbols and ornaments for the representation of metamorphic rocks. The symbols and ornaments may be divided in two groups as follows: principal types; varia. They are reproduced in two tables which, being derived from a logical system, may be completed easily in case of need.
|
Published |
1982-04 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 710-5:1982 |
Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 5: Representation of minerals |
|
Withdrawn |
1982-06 |
Edition : 1 |
Number of pages : 3 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 710-5:1989 |
Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 5: Representation of minerals |
This second edition cancels and replaces the first edition (1982). Provides a unified series of symbols and abbreviations for the representation of certain minerals often found in rocks. In general, there are two ways of representing these minerals, namely: by the addition of another symbol characterizing the mineral; by the addition of letters designating the mineral (table 2 - ranging from No. 1 to No. 123).
|
Published |
1989-07 |
Edition : 2 |
Number of pages : 3 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO/TR 13567-3:1999 |
Technical product documentation — Organization and naming of layers for CAD — Part 3: Application of ISO 13567-1 and ISO 13567-2 |
|
Withdrawn |
1999-10 |
Edition : 1 |
Number of pages : 11 |
Technical Committee |
01.110
Technical product documentation
;
35.240.10
Computer-aided design (CAD)
|
| ISO 710-6:1984 |
Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering |
Provides a series of graphical symbols to represent rocks which have originated as the result of contact metamorphism or other effects. The symbols are divided into four groups which are shown in the table: a) contact rocks; b) metasomatic transformation; c) pneumatolytic and hydrothermal processes; d) weathering processes.
|
Published |
1984-05 |
Edition : 1 |
Number of pages : 4 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 710-7:1984 |
Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 7: Tectonic symbols |
Provides a series of graphical symbols to represent tectonic phenomena. This part includes symbols for: strata, faults, joints and schistosity; folds and monoclines; lineations and axes. Table 1 gives the basic symbols; table 2 shows special planes; table 3 contains slopes; table 4 represents folds and monoclines. Fourteen figures illustrate the descriptions.
|
Published |
1984-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
07.060
Geology. Meteorology. Hydrology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO/R 784:1968 |
Conventional signs to be used in schemes for the installations of sanitary systems in ships |
The symbols given in tables have been classified in the following manner: - General conventional signs, - Pipes and pipe joints, - Valves and supply fittings. The general conventional signs concern symbols representing principal parts.
|
Withdrawn |
1968-07 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
47.020.30
Piping systems
|
| ISO 1219-1:1991 |
Fluid power systems and components — Graphic symbols and circuit diagrams — Part 1: Graphic symbols |
Establishes principles for the use of symbols and specifies basic symbols and rules for devising functional symbols. Contains the alphabetical indexes in English and French. This first edition cancels and replaces ISO 1219:1976.
|
Withdrawn |
1991-10 |
Edition : 1 |
Number of pages : 40 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 1219-1:2006 |
Fluid power systems and components — Graphic symbols and circuit diagrams — Part 1: Graphic symbols for conventional use and data-processing applications |
ISO 1219-1:2006 establishes basic elements for symbols. It lays down rules for devising fluid power symbols for use on components and in circuit diagrams.
ISO 1219-1:2006 is a collective application standard of the ISO 14617 series. In this series of International Standards, the symbols are designed in fixed dimensions to be used directly in data processing systems, which might result in different variants.
In addition to terms in English and French, two of the three official ISO languages, ISO 1219-1:2006 also gives the equivalent terms in German.
|
Withdrawn |
2006-10 |
Edition : 2 |
Number of pages : 165 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 1219-1:2012 |
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
ISO 1219-1:2012 establishes basic elements for symbols. It specifies rules for devising fluid power symbols for use on components and in circuit diagrams.
ISO 1219-1:2012 is a collective application standard of the ISO 14617 series. In ISO 1219-1:2012, the symbols are designed in fixed dimensions to be used directly in data processing systems, which might result in different variants.
|
Published |
2012-06 |
Edition : 3 |
Number of pages : 178 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 1219-1:2012/Amd 1:2016 |
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications — Amendment 1 |
|
Published |
2016-04 |
Edition : 3 |
Number of pages : 2 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 1219-2:1995 |
Fluid power systems and components — Graphic symbols and circuit diagrams — Part 2: Circuit diagrams |
Establishes the rules for drawing diagrams of fluid power systems using symbols from ISO 1219-1.
|
Withdrawn |
1995-12 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 1219-2:2012 |
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
ISO 1219-2:2011 establishes the main rules for drawing hydraulic and pneumatic circuit diagrams using graphical symbols drawn in accordance with ISO 1219-1.
ISO 1219-2:2011 also applies to circuit diagrams relating to cooling systems, lubrication systems, cooling lubricant systems and systems of technical gases used in conjunction with fluid power applications.
|
Published |
2012-09 |
Edition : 2 |
Number of pages : 42 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 1219-3:2016 |
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams |
ISO 1219-3:2016 supplements ISO 1219-1 and ISO 1219-2 by specifying rules for the generation and combination of symbols of connectable components in circuit diagrams. Using these symbols, the design envelope and piping can be reduced.
|
Published |
2016-09 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 1219:1976 |
Fluid power systems and components — Graphic symbols |
|
Withdrawn |
1976-08 |
Edition : 1 |
Number of pages : 23 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 1964:1975 |
Shipbuilding — Indication of details on the general arrangement plans of ships |
|
Withdrawn |
1975-11 |
Edition : 1 |
Number of pages : 16 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
47.020.01
General standards related to shipbuilding and marine structures
|
| ISO 1964:1987 |
Shipbuilding — Indication of details on the general arrangement plans of ships |
Specifies symbols for the following equipment and their parts: Bulkheads and bulkheads openings, accommodation furniture, sanitary equipment, galley and laundry, workshops, navigation, deck equipment, stairs, bulkwards, hatches and covers. In 1.1, 2.1 und 3.1 basic symbols.Examples of combinations have been given at the end of most sub-clauses.
|
Published |
1987-10 |
Edition : 2 |
Number of pages : 16 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
47.020.01
General standards related to shipbuilding and marine structures
|
| ISO 3511-1:1977 |
Process measurement control functions and instrumentation — Symbolic representation — Part 1: Basic requirements |
Forms one part of four which provide a universal means of communication between the various interests involved in the design, manufacture, installation and operation of measurement and control equipment used in the process industries. This part establishes a symbols system for use in depicting the basic functions. The system has been limited to the identification of instrument functions and does not provide means of illustrating specific instruments. The definitions are used solely for the purpose of application and understanding of the symbol system.
|
Published |
1977-07 |
Edition : 1 |
Number of pages : 10 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
25.040.40
Industrial process measurement and control
|
| ISO 3511-2:1984 |
Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements |
Forms and extension of part 1 which is limited to identification of instrument functions. Includes additional symbols and is intended for the communication of measurement and control fuctions among instrument specialists and other engineers involved in vessels, piping, layout design and operation. The definitions given in ISO 3511-1 apply equally to this part.Messen, Steuern, Regeln in der Verfahrenstechnik; Zeichen für die funktionelle Darstellung; Teil 2: Erweiterung der Grundforderungen
|
Published |
1984-06 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
25.040.40
Industrial process measurement and control
|
| ISO 3952-4:1984 |
Kinematic diagrams — Graphical symbols |
The symbols system is intended for simplifying the preparation of diagrams of products in all branches of industry and is to be used in technical documentation as well as in technical and educational literature. It will facilitate the execution and understanding of such diagrams by specialists of different countries. This part contains miscellaneous mechanisms and their components.
|
Published |
1984-07 |
Edition : 1 |
Number of pages : 6 |
Technical Committee |
21.020
Characteristics and design of machines, apparatus, equipment
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 3511-3:1984 |
Process measurement control functions and instrumentation — Symbolic representation — Part 3: Detailed symbols for instrument interconnection diagrams |
Forms one part of four and specifies symbols which show, by detailing the components, the external connections between units of equipment. These symbols are not intended to replace the graphic symbols contained in IEC Publication 117. the diagrams may employ single line or multi-line representation and be combined with, or replaced ty tables, provided clarity is maintained. For further assistance see IEC Puplication 113 Part 5, Preparation of interconnection diagrams and tables.
|
Published |
1984-06 |
Edition : 1 |
Number of pages : 19 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
25.040.40
Industrial process measurement and control
|
| ISO 3511-4:1985 |
Industrial process measurement control functions and instrumentation — Symbolic representation — Part 4: Basic symbols for process computer, interface, and shared display/control functions |
The symbols in this part shall be considered a supplement to the symbols given in ISO 3511/1 and ISO 3511/2 and used in conjunction with them. The letter code for function identification shall be taken from table 1 of these two parts.The symbols are limited to identification on process flow diagrams, piping and instrument diagrams, etc. and do not provide means of illustrating specific instruments or parts thereof. The application methods are shown in the examples.
|
Published |
1985-08 |
Edition : 1 |
Number of pages : 8 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
25.040.40
Industrial process measurement and control
|
| ISO 3753:1977 |
Vacuum technology — Graphical symbols |
The graphical symbols of vaccum pumps, baffles, traps, pressure measuring apparatus, flowliness, valves and vaccum chambers are described and illustrated. In the annex an example of the use of the recommended symbols is shown.
|
Withdrawn |
1977-07 |
Edition : 1 |
Number of pages : 13 |
Technical Committee |
23.160
Vacuum technology
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 3952-1:1981 |
Kinematic diagrams — Graphical symbols |
The symbols system is intended for simplifying the preparation of diagrams of products in all branches of industry and is to be used in technical documentation as well as in technical and educational literature. This part contains the following: Motion of links of mechanisms, kinematic pairs, links and connections of their components, and N-bar linkages and their components.
|
Published |
1981-12 |
Edition : 1 |
Number of pages : 18 |
Technical Committee |
21.020
Characteristics and design of machines, apparatus, equipment
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 3952-1:1981/Amd 1:2002 |
Kinematic diagrams — Graphical symbols — Amendment 1 |
|
Published |
2002-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
21.020
Characteristics and design of machines, apparatus, equipment
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 3952-2:1981 |
Kinematic diagrams — Graphical symbols |
The symbols system is intended for simplifying the preparation of diagrams of products in all branches of industry and is to be used in technical documentation as well as in technical and educational literature. It will facilitate the execution and understanding of such diagrams by specialists of different countries. This part contains friction and gear mechanisms and cam mechanisms.
|
Published |
1981-07 |
Edition : 1 |
Number of pages : 12 |
Technical Committee |
21.020
Characteristics and design of machines, apparatus, equipment
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 3952-3:1979 |
Kinematic diagrams — Graphical symbols |
The symbols system is intended for simplifying the preparation of diagrams of products in all branches of industry and is to be used in technical documentation as well as in technical and educational literature. It will facilitate the execution and understanding of such diagrams by specialists of different countries. This part contains Geneva and ratchet mechanisms as well as couplings and brakes.
|
Published |
1979-12 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
21.020
Characteristics and design of machines, apparatus, equipment
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO 10628:1997 |
Flow diagrams for process plants — General rules |
|
Withdrawn |
1997-04 |
Edition : 1 |
Number of pages : 59 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
|
| ISO/TR 7775:1997 |
Securities — Scheme for message types |
|
Withdrawn |
1997-05 |
Edition : 1 |
Number of pages : 140 |
Technical Committee |
03.060
Finances. Banking. Monetary systems. Insurance
|
| ISO 4067-1:1984 |
Technical drawings — Installations — Part 1: Graphical symbols for plumbing, heating, ventilation and ducting |
Establishes basic symbols for drainage and water supply, space heating and cooling, and ducted air handling systems. They may be combined with designations specified in a description ora system of more detailed symbols based on these basic symbols. This part of ISO 4067 will be modified as soon as results are available from the work concerning the coordination of symbols for use in drawings in all technical areas.
|
Withdrawn |
1984-09 |
Edition : 1 |
Number of pages : 9 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
01.100.30
Construction drawings
|
| ISO 4067-2:1980 |
Building and civil engineering drawings — Installations — Part 2: Simplified representation of sanitary appliances |
The representations are primarily intended for use on plans and diagrams at a scale 1 : 50. For smaller scale drawings more simplified and for larger scale drawings more detailed representations may be used. For diagrams the representation in column "Elevation" will normally be apparopriate. For making the drawing clearer the views may be combined with symbols and/or abbreviated component references, which are explained in the drawing or elsewhere.
|
Withdrawn |
1980-10 |
Edition : 1 |
Number of pages : 2 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
01.100.30
Construction drawings
|
| ISO 4067-6:1985 |
Technical drawings — Installations — Part 6: Graphical symbols for supply water and drainage systems in the ground |
Establishes basic symbols for conduits, pipes and ditches including fabricated parts and equipment. Symbols are shown and used primaily in plans, but they can in applicable cases also be used in sections, cuts and elevations. This part of ISO 4067 will be modified as soon as results are available from the work concerning the coordination of symbols for use in drawings in all technical areas.
|
Withdrawn |
1985-05 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
01.100.30
Construction drawings
|
| ISO 5232:1988 |
Graphical symbols for textile machinery |
|
Withdrawn |
1988-12 |
Edition : 1 |
Number of pages : 42 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
59.120.01
Textile machinery in general
|
| ISO 5232:1998 |
Graphical symbols for textile machinery |
|
Withdrawn |
1998-09 |
Edition : 2 |
Number of pages : 41 |
Technical Committee |
01.080.20
Graphical symbols for use on specific equipment
;
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
59.120.01
Textile machinery in general
|
| ISO 5784-1:1988 |
Fluid power systems and components — Fluid logic circuits — Part 1: Symbols for binary logic and related functions |
This part defines graphical symbols for binary logic and gives some rules concerning their use in circuit diagrams. Symbols given in this part shall be used for all documents and circuit diagrams concerning logic and related functions for data processing. Includes examples of association of elementary symbols. The form A symbols are in accordance with IEC Publication 617-12 and are to be preferred; the form B symbols, although currently used, are not preferred for future use.
|
Withdrawn |
1988-03 |
Edition : 1 |
Number of pages : 21 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO 5784-2:1989 |
Fluid power systems and components — Fluid logic circuits — Part 2: Symbols for supply and exhausts as related to logic symbols |
This part specifies rules for the use of symbols in basic logic systems needed for better understanding of pipe connections. This system may be used to define functions as well as for diagram circuitry. The rules specified in this part are applicable to any type of fluid power binary logic device, with or without moving parts.
|
Withdrawn |
1989-12 |
Edition : 1 |
Number of pages : 5 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
23.100.01
Fluid power systems in general
|
| ISO/TR 12343:1997 |
Road vehicles — Symbols for electrotechnical diagrams |
|
Withdrawn |
1997-12 |
Edition : 1 |
Number of pages : 14 |
Technical Committee |
01.080.30
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
;
43.040.10
Electrical and electronic equipment
|